From: Yu Tu <yu.tu@amlogic.com>
To: <linux-clk@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-amlogic@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Neil Armstrong <narmstrong@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Yu Tu <yu.tu@amlogic.com>
Subject: [PATCH V3 4/6] dt-bindings: clk: meson: add S4 SoC peripheral clock controller bindings
Date: Fri, 5 Aug 2022 16:57:14 +0800 [thread overview]
Message-ID: <20220805085716.5635-5-yu.tu@amlogic.com> (raw)
In-Reply-To: <20220805085716.5635-1-yu.tu@amlogic.com>
Add peripheral clock controller compatible and dt-bindings header for
the of the S4 SoC.
Signed-off-by: Yu Tu <yu.tu@amlogic.com>
---
.../bindings/clock/amlogic,s4-clkc.yaml | 92 ++++++++++++
include/dt-bindings/clock/amlogic,s4-clkc.h | 131 ++++++++++++++++++
2 files changed, 223 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-clkc.yaml
create mode 100644 include/dt-bindings/clock/amlogic,s4-clkc.h
diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-clkc.yaml
new file mode 100644
index 000000000000..2471276afda9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,s4-clkc.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,s4-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson S serials Peripheral Clock Controller Device Tree Bindings
+
+maintainers:
+ - Neil Armstrong <narmstrong@baylibre.com>
+ - Jerome Brunet <jbrunet@baylibre.com>
+ - Yu Tu <yu.hu@amlogic.com>
+
+
+properties:
+ compatible:
+ const: amlogic,s4-periphs-clkc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: input fixed pll div2
+ - description: input fixed pll div2p5
+ - description: input fixed pll div3
+ - description: input fixed pll div4
+ - description: input fixed pll div5
+ - description: input fixed pll div7
+ - description: input hifi pll
+ - description: input gp0 pll
+ - description: input mpll0
+ - description: input mpll1
+ - description: input mpll2
+ - description: input mpll3
+ - description: input hdmi pll
+ - description: input oscillator (usually at 24MHz)
+
+ clock-names:
+ items:
+ - const: fclk_div2
+ - const: fclk_div2p5
+ - const: fclk_div3
+ - const: fclk_div4
+ - const: fclk_div5
+ - const: fclk_div7
+ - const: hifi_pll
+ - const: gp0_pll
+ - const: mpll0
+ - const: mpll1
+ - const: mpll2
+ - const: mpll3
+ - const: hdmi_pll
+ - const: xtal
+
+ "#clock-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ clkc_periphs: periphs-clock-controller@fe000000 {
+ compatible = "amlogic,s4-periphs-clkc";
+ reg = <0xfe000000 0x49c>;
+ clocks = <&clkc_pll 3>,
+ <&clkc_pll 13>,
+ <&clkc_pll 5>,
+ <&clkc_pll 7>,
+ <&clkc_pll 9>,
+ <&clkc_pll 11>,
+ <&clkc_pll 17>,
+ <&clkc_pll 15>,
+ <&clkc_pll 25>,
+ <&clkc_pll 27>,
+ <&clkc_pll 29>,
+ <&clkc_pll 31>,
+ <&clkc_pll 20>,
+ <&xtal>;
+ clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3", "fclk_div4",
+ "fclk_div5", "fclk_div7", "hifi_pll", "gp0_pll",
+ "mpll0", "mpll1", "mpll2", "mpll3", "hdmi_pll", "xtal";
+ #clock-cells = <1>;
+ };
+...
diff --git a/include/dt-bindings/clock/amlogic,s4-clkc.h b/include/dt-bindings/clock/amlogic,s4-clkc.h
new file mode 100644
index 000000000000..d203b9bbf29e
--- /dev/null
+++ b/include/dt-bindings/clock/amlogic,s4-clkc.h
@@ -0,0 +1,131 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ * Author: Yu Tu <yu.tu@amlogic.com>
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_CLKC_H
+#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_CLKC_H
+
+/*
+ * CLKID index values
+ */
+
+#define CLKID_RTC_CLK 1
+#define CLKID_SYS_CLK_B_GATE 2
+#define CLKID_SYS_CLK_A_GATE 3
+#define CLKID_SYS_CLK 4
+#define CLKID_CECA_32K_CLKOUT 5
+#define CLKID_CECB_32K_CLKOUT 6
+#define CLKID_SC_CLK_GATE 7
+#define CLKID_12_24M_CLK_SEL 8
+#define CLKID_VID_PLL 9
+#define CLKID_VCLK 10
+#define CLKID_VCLK2 11
+#define CLKID_VCLK_DIV1 12
+#define CLKID_VCLK2_DIV1 13
+#define CLKID_VCLK_DIV2 14
+#define CLKID_VCLK_DIV4 15
+#define CLKID_VCLK_DIV6 16
+#define CLKID_VCLK_DIV12 17
+#define CLKID_VCLK2_DIV2 18
+#define CLKID_VCLK2_DIV4 19
+#define CLKID_VCLK2_DIV6 20
+#define CLKID_VCLK2_DIV12 21
+#define CLKID_CTS_ENCI 22
+#define CLKID_CTS_ENCP 23
+#define CLKID_CTS_VDAC 24
+#define CLKID_HDMI 25
+#define CLKID_TS_CLK_GATE 26
+#define CLKID_MALI_0 27
+#define CLKID_MALI_1 28
+#define CLKID_MALI 29
+#define CLKID_VDEC_P0 30
+#define CLKID_VDEC_P1 31
+#define CLKID_VDEC_SEL 32
+#define CLKID_HEVCF_P0 33
+#define CLKID_HEVCF_P1 34
+#define CLKID_HEVCF_SEL 35
+#define CLKID_VPU_0 36
+#define CLKID_VPU_1 37
+#define CLKID_VPU 38
+#define CLKID_VPU_CLKB_TMP 39
+#define CLKID_VPU_CLKB 40
+#define CLKID_VPU_CLKC_P0 41
+#define CLKID_VPU_CLKC_P1 42
+#define CLKID_VPU_CLKC_SEL 43
+#define CLKID_VAPB_0 44
+#define CLKID_VAPB_1 45
+#define CLKID_VAPB 46
+#define CLKID_GE2D 47
+#define CLKID_VDIN_MEAS_GATE 48
+#define CLKID_SD_EMMC_C_CLK 49
+#define CLKID_SD_EMMC_A_CLK 50
+#define CLKID_SD_EMMC_B_CLK 51
+#define CLKID_SPICC0_GATE 52
+#define CLKID_PWM_A_GATE 53
+#define CLKID_PWM_B_GATE 54
+#define CLKID_PWM_C_GATE 55
+#define CLKID_PWM_D_GATE 56
+#define CLKID_PWM_E_GATE 57
+#define CLKID_PWM_F_GATE 58
+#define CLKID_PWM_G_GATE 59
+#define CLKID_PWM_H_GATE 60
+#define CLKID_PWM_I_GATE 61
+#define CLKID_PWM_J_GATE 62
+#define CLKID_SARADC_GATE 63
+#define CLKID_GEN_GATE 64
+#define CLKID_DDR 65
+#define CLKID_DOS 66
+#define CLKID_ETHPHY 67
+#define CLKID_MALI_GATE 68
+#define CLKID_AOCPU 69
+#define CLKID_AUCPU 70
+#define CLKID_CEC 71
+#define CLKID_SD_EMMC_A 72
+#define CLKID_SD_EMMC_B 73
+#define CLKID_NAND 74
+#define CLKID_SMARTCARD 75
+#define CLKID_ACODEC 76
+#define CLKID_SPIFC 77
+#define CLKID_MSR_CLK 78
+#define CLKID_IR_CTRL 79
+#define CLKID_AUDIO 80
+#define CLKID_ETH 81
+#define CLKID_UART_A 82
+#define CLKID_UART_B 83
+#define CLKID_UART_C 84
+#define CLKID_UART_D 85
+#define CLKID_UART_E 86
+#define CLKID_AIFIFO 87
+#define CLKID_TS_DDR 88
+#define CLKID_TS_PLL 89
+#define CLKID_G2D 90
+#define CLKID_SPICC0 91
+#define CLKID_SPICC1 92
+#define CLKID_USB 93
+#define CLKID_I2C_M_A 94
+#define CLKID_I2C_M_B 95
+#define CLKID_I2C_M_C 96
+#define CLKID_I2C_M_D 97
+#define CLKID_I2C_M_E 98
+#define CLKID_HDMITX_APB 99
+#define CLKID_I2C_S_A 100
+#define CLKID_USB1_TO_DDR 101
+#define CLKID_HDCP22 102
+#define CLKID_MMC_APB 103
+#define CLKID_RSA 104
+#define CLKID_CPU_DEBUG 105
+#define CLKID_VPU_INTR 106
+#define CLKID_DEMOD 107
+#define CLKID_SAR_ADC 108
+#define CLKID_GIC 109
+#define CLKID_PWM_AB 110
+#define CLKID_PWM_CD 111
+#define CLKID_PWM_EF 112
+#define CLKID_PWM_GH 113
+#define CLKID_PWM_IJ 114
+#define CLKID_HDCP22_ESMCLK_GATE 115
+#define CLKID_HDCP22_SKPCLK_GATE 116
+
+#endif /* _DT_BINDINGS_CLOCK_AMLOGIC_S4_CLKC_H */
--
2.33.1
next prev parent reply other threads:[~2022-08-05 8:59 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-05 8:57 [PATCH V3 0/6] Add S4 SoC PLL and Peripheral clock controller Yu Tu
2022-08-05 8:57 ` [PATCH V3 1/6] dt-bindings: clock: meson: add S4 SoC PLL clock controller bindings Yu Tu
2022-08-05 9:13 ` Krzysztof Kozlowski
2022-08-05 8:57 ` [PATCH V3 2/6] arm64: dts: meson: add S4 Soc PLL clock controller in DT Yu Tu
2022-08-05 9:16 ` Krzysztof Kozlowski
2022-08-05 9:39 ` Yu Tu
2022-08-10 13:32 ` Jerome Brunet
2022-08-15 6:17 ` Yu Tu
2022-08-29 9:43 ` Jerome Brunet
2022-08-30 6:05 ` Yu Tu
2022-08-30 6:36 ` Jerome Brunet
2022-08-30 7:06 ` Yu Tu
2022-08-05 8:57 ` [PATCH V3 3/6] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver Yu Tu
2022-08-10 13:47 ` Jerome Brunet
2022-08-15 6:34 ` Yu Tu
2022-08-15 13:20 ` Yu Tu
2022-08-29 9:48 ` Jerome Brunet
2022-08-30 6:13 ` Yu Tu
2022-08-30 6:44 ` Jerome Brunet
2022-08-30 7:37 ` Yu Tu
2022-09-21 8:40 ` Yu Tu
2022-09-28 15:27 ` Jerome Brunet
2022-09-29 7:07 ` Yu Tu
2022-10-22 12:22 ` Jerome Brunet
2022-10-24 11:33 ` Yu Tu
2022-08-29 9:46 ` Jerome Brunet
2022-08-30 6:08 ` Yu Tu
2022-08-05 8:57 ` Yu Tu [this message]
2022-08-05 9:15 ` [PATCH V3 4/6] dt-bindings: clk: meson: add S4 SoC peripheral clock controller bindings Krzysztof Kozlowski
2022-08-05 9:33 ` Yu Tu
2022-08-08 6:16 ` Krzysztof Kozlowski
2022-08-08 10:00 ` Yu Tu
2022-08-05 8:57 ` [PATCH V3 5/6] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT Yu Tu
2022-08-05 9:16 ` Krzysztof Kozlowski
2022-08-05 9:36 ` Yu Tu
2022-08-08 6:17 ` Krzysztof Kozlowski
2022-08-08 10:02 ` Yu Tu
2022-08-05 8:57 ` [PATCH V3 6/6] clk: meson: s4: add s4 SoC peripheral clock controller driver Yu Tu
2022-08-10 13:57 ` Jerome Brunet
2022-08-16 12:00 ` Yu Tu
2022-08-29 12:19 ` Jerome Brunet
2022-08-30 8:20 ` Yu Tu
2022-09-21 9:01 ` Yu Tu
2022-09-28 15:35 ` Jerome Brunet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220805085716.5635-5-yu.tu@amlogic.com \
--to=yu.tu@amlogic.com \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=mturquette@baylibre.com \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).