From: Prabhakar <prabhakar.csengg@gmail.com>
To: Arnd Bergmann <arnd@arndb.de>,
Conor Dooley <conor.dooley@microchip.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Heiko Stuebner <heiko@sntech.de>, Guo Ren <guoren@kernel.org>,
Andrew Jones <ajones@ventanamicro.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-riscv@lists.infradead.org,
linux-renesas-soc@vger.kernel.org, Rob Herring <robh@kernel.org>
Subject: [PATCH v6 4/6] dt-bindings: cache: r9a07g043f-l2-cache: Add DT binding documentation for L2 cache controller
Date: Fri, 6 Jan 2023 18:55:24 +0000 [thread overview]
Message-ID: <20230106185526.260163-5-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)
In-Reply-To: <20230106185526.260163-1-prabhakar.mahadev-lad.rj@bp.renesas.com>
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Add DT binding documentation for L2 cache controller found on RZ/Five SoC.
The Renesas RZ/Five microprocessor includes a RISC-V CPU Core (AX45MP
Single) from Andes. The AX45MP core has an L2 cache controller, this patch
describes the L2 cache block.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
v5 -> v6
* Included RB tag from Geert
v4 -> v5
* Dropped L2 cache configuration properties
* Dropped PMA configuration properties
* Ordered the required list to match the properties list
RFC v3 -> v4
* Dropped l2 cache configuration parameters
* s/larger/large
* Added minItems/maxItems for andestech,pma-regions
---
.../cache/andestech,ax45mp-cache.yaml | 81 +++++++++++++++++++
1 file changed, 81 insertions(+)
create mode 100644 Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml
diff --git a/Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml b/Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml
new file mode 100644
index 000000000000..9f0be4835ad7
--- /dev/null
+++ b/Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cache/andestech,ax45mp-cache.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Andestech AX45MP L2 Cache Controller
+
+maintainers:
+ - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+ A level-2 cache (L2C) is used to improve the system performance by providing
+ a large amount of cache line entries and reasonable access delays. The L2C
+ is shared between cores, and a non-inclusive non-exclusive policy is used.
+
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - andestech,ax45mp-cache
+
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: andestech,ax45mp-cache
+ - const: cache
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ cache-line-size:
+ const: 64
+
+ cache-level:
+ const: 2
+
+ cache-sets:
+ const: 1024
+
+ cache-size:
+ enum: [131072, 262144, 524288, 1048576, 2097152]
+
+ cache-unified: true
+
+ next-level-cache: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - cache-line-size
+ - cache-level
+ - cache-sets
+ - cache-size
+ - cache-unified
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ cache-controller@2010000 {
+ compatible = "andestech,ax45mp-cache", "cache";
+ reg = <0x13400000 0x100000>;
+ interrupts = <508 IRQ_TYPE_LEVEL_HIGH>;
+ cache-line-size = <64>;
+ cache-level = <2>;
+ cache-sets = <1024>;
+ cache-size = <262144>;
+ cache-unified;
+ };
--
2.25.1
next prev parent reply other threads:[~2023-01-06 18:58 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-06 18:55 [PATCH v6 0/6] RISC-V non-coherent function pointer based cache management operations + non-coherent DMA support for AX45MP Prabhakar
2023-01-06 18:55 ` [RFC PATCH v6 1/6] riscv: mm: dma-noncoherent: Switch using function pointers for cache management Prabhakar
2023-01-06 22:31 ` Arnd Bergmann
2023-01-06 23:29 ` Conor Dooley
2023-01-07 21:52 ` Arnd Bergmann
2023-01-07 22:21 ` Conor Dooley
2023-01-08 16:37 ` Conor Dooley
2023-01-07 22:10 ` Lad, Prabhakar
2023-01-08 0:07 ` Arnd Bergmann
2023-01-09 12:03 ` Lad, Prabhakar
2023-01-09 12:59 ` Arnd Bergmann
2023-01-09 13:27 ` Conor Dooley
2023-01-10 7:01 ` Christoph Hellwig
2023-01-10 15:03 ` Arnd Bergmann
2023-01-10 15:11 ` Will Deacon
2023-01-13 5:48 ` Christoph Hellwig
2023-01-20 17:04 ` Arnd Bergmann
2023-01-21 14:37 ` Christoph Hellwig
2023-01-21 19:30 ` Arnd Bergmann
2023-01-22 7:27 ` Christoph Hellwig
2023-01-22 11:04 ` Arnd Bergmann
2023-01-23 14:46 ` Christoph Hellwig
2023-01-06 23:47 ` Conor Dooley
2023-01-07 22:36 ` Lad, Prabhakar
2023-01-06 18:55 ` [PATCH v6 2/6] riscv: asm: vendorid_list: Add Andes Technology to the vendors list Prabhakar
2023-01-06 18:55 ` [PATCH v6 3/6] riscv: errata: Add Andes alternative ports Prabhakar
2023-01-06 21:44 ` Conor Dooley
2023-01-06 18:55 ` Prabhakar [this message]
2023-01-06 21:53 ` [PATCH v6 4/6] dt-bindings: cache: r9a07g043f-l2-cache: Add DT binding documentation for L2 cache controller Conor Dooley
2023-01-07 20:43 ` Lad, Prabhakar
2023-01-09 12:15 ` Geert Uytterhoeven
2023-01-09 13:14 ` Lad, Prabhakar
2023-01-06 18:55 ` [PATCH v6 5/6] cache: Add L2 cache management for Andes AX45MP RISC-V core Prabhakar
2023-01-07 0:09 ` Conor Dooley
2023-01-07 20:49 ` Lad, Prabhakar
2023-01-06 18:55 ` [PATCH v6 6/6] soc: renesas: Kconfig: Select the required configs for RZ/Five SoC Prabhakar
2023-01-06 23:49 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230106185526.260163-5-prabhakar.mahadev-lad.rj@bp.renesas.com \
--to=prabhakar.csengg@gmail.com \
--cc=ajones@ventanamicro.com \
--cc=arnd@arndb.de \
--cc=conor.dooley@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=guoren@kernel.org \
--cc=heiko@sntech.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).