From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Paul Burton <paulburton@kernel.org>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
linux-mips@vger.kernel.org, Jiaxun Yang <jiaxun.yang@flygoat.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
"Tawfik Bayouk" <tawfik.bayouk@mobileye.com>,
"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
"Théo Lebrun" <theo.lebrun@bootlin.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Gregory CLEMENT" <gregory.clement@bootlin.com>
Subject: [PATCH v5 21/22] MIPS: generic: Add support for Mobileye EyeQ5
Date: Tue, 12 Dec 2023 17:34:53 +0100 [thread overview]
Message-ID: <20231212163459.1923041-22-gregory.clement@bootlin.com> (raw)
In-Reply-To: <20231212163459.1923041-1-gregory.clement@bootlin.com>
Introduce support for the MIPS based Mobileye EyeQ5 SoCs.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/mips/configs/generic/board-eyeq5.config | 42 ++++++++++++++++++++
arch/mips/generic/Kconfig | 15 +++++++
arch/mips/generic/Platform | 2 +
arch/mips/generic/board-epm5.its.S | 24 +++++++++++
4 files changed, 83 insertions(+)
create mode 100644 arch/mips/configs/generic/board-eyeq5.config
create mode 100644 arch/mips/generic/board-epm5.its.S
diff --git a/arch/mips/configs/generic/board-eyeq5.config b/arch/mips/configs/generic/board-eyeq5.config
new file mode 100644
index 0000000000000..d94e408145389
--- /dev/null
+++ b/arch/mips/configs/generic/board-eyeq5.config
@@ -0,0 +1,42 @@
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_TASKSTATS=y
+CONFIG_FIT_IMAGE_FDT_EPM5=y
+CONFIG_BOARD_EYEQ5=y
+CONFIG_PHYSICAL_START=0xa800000808000000
+CONFIG_CPU_HAS_MSA=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_NET_KEY=y
+CONFIG_CAN=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_DEBUG=y
+CONFIG_PCI_ENDPOINT=y
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_BLOCK2MTD=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BLOCK=y
+CONFIG_NETDEVICES=y
+CONFIG_MACVLAN=y
+CONFIG_IPVLAN=y
+CONFIG_MACB=y
+CONFIG_MARVELL_PHY=y
+CONFIG_MICREL_PHY=y
+CONFIG_CAN_M_CAN=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_PINCTRL=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_CADENCE=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_FANOTIFY=y
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BOTH=y
+CONFIG_PAGE_SIZE_16KB=y
\ No newline at end of file
diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig
index 7dc5b3821cc6e..04e1fc6f789b5 100644
--- a/arch/mips/generic/Kconfig
+++ b/arch/mips/generic/Kconfig
@@ -48,6 +48,13 @@ config SOC_VCOREIII
config MSCC_OCELOT
bool
+config SOC_EYEQ5
+ select ARM_AMBA
+ select WEAK_ORDERING
+ select WEAK_REORDERING_BEYOND_LLSC
+ select PHYSICAL_START_BOOL
+ bool
+
comment "FIT/UHI Boards"
config FIT_IMAGE_FDT_BOSTON
@@ -124,4 +131,12 @@ config VIRT_BOARD_RANCHU
Android emulator. Android emulator is based on Qemu, and contains
the support for the same set of virtual devices.
+config FIT_IMAGE_FDT_EPM5
+ bool "Include FDT for Mobileye EyeQ5 development platforms"
+ select SOC_EYEQ5
+ default n
+ help
+ Enable this to include the FDT for the EyeQ5 development platforms
+ from Mobileye in the FIT kernel image.
+ This requires u-boot on the platform.
endif
diff --git a/arch/mips/generic/Platform b/arch/mips/generic/Platform
index 0c03623f38970..45db9824a11d6 100644
--- a/arch/mips/generic/Platform
+++ b/arch/mips/generic/Platform
@@ -24,3 +24,5 @@ its-$(CONFIG_FIT_IMAGE_FDT_JAGUAR2) += board-jaguar2.its.S
its-$(CONFIG_FIT_IMAGE_FDT_SERVAL) += board-serval.its.S
its-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += board-xilfpga.its.S
its-$(CONFIG_FIT_IMAGE_FDT_MARDUK) += board-marduk.its.S
+its-$(CONFIG_FIT_IMAGE_FDT_EPM5) += board-epm5.its.S
+
diff --git a/arch/mips/generic/board-epm5.its.S b/arch/mips/generic/board-epm5.its.S
new file mode 100644
index 0000000000000..08e8c4f183d63
--- /dev/null
+++ b/arch/mips/generic/board-epm5.its.S
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/ {
+ images {
+ fdt-mobileye-epm5 {
+ description = "Mobileeye MP5 Device Tree";
+ data = /incbin/("boot/dts/mobileye/eyeq5-epm5.dtb");
+ type = "flat_dt";
+ arch = "mips";
+ compression = "none";
+ hash {
+ algo = "sha1";
+ };
+ };
+ };
+
+ configurations {
+ default = "conf-1";
+ conf-1 {
+ description = "Mobileye EPM5 Linux kernel";
+ kernel = "kernel";
+ fdt = "fdt-mobileye-epm5";
+ };
+ };
+};
--
2.42.0
next prev parent reply other threads:[~2023-12-12 16:36 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-12 16:34 [PATCH v5 00/22] Add support for the Mobileye EyeQ5 SoC Gregory CLEMENT
2023-12-12 16:34 ` [PATCH v5 01/22] MIPS: compressed: Use correct instruction for 64 bit code Gregory CLEMENT
2023-12-21 14:38 ` Thomas Bogendoerfer
2023-12-12 16:34 ` [PATCH v5 02/22] MIPS: Export higher/highest relocation functions in uasm Gregory CLEMENT
2023-12-12 16:34 ` [PATCH v5 03/22] MIPS: spaces: Define a couple of handy macros Gregory CLEMENT
2023-12-12 16:34 ` [PATCH v5 04/22] MIPS: genex: Fix except_vec_vi for kernel in XKPHYS Gregory CLEMENT
2023-12-12 16:34 ` [PATCH v5 05/22] MIPS: Fix set_uncached_handler for ebase " Gregory CLEMENT
2023-12-12 16:34 ` [PATCH v5 06/22] MIPS: Refactor mips_cps_core_entry implementation Gregory CLEMENT
2023-12-12 16:34 ` [PATCH v5 07/22] MIPS: Fix cache issue with mips_cps_core_entry Gregory CLEMENT
2023-12-12 16:34 ` [PATCH v5 08/22] MIPS: Allow kernel base to be set from Kconfig for all platforms Gregory CLEMENT
2023-12-12 16:34 ` [PATCH v5 09/22] MIPS: traps: Handle CPU with non standard vint offset Gregory CLEMENT
2023-12-12 16:34 ` [PATCH v5 10/22] MIPS: Avoid unnecessary reservation of exception space Gregory CLEMENT
2023-12-12 16:34 ` [PATCH v5 11/22] MIPS: traps: Enhance memblock ebase allocation process Gregory CLEMENT
2023-12-12 16:34 ` [PATCH v5 12/22] MIPS: Get rid of CONFIG_NO_EXCEPT_FILL Gregory CLEMENT
2023-12-12 16:34 ` [PATCH v5 13/22] MIPS: traps: Give more explanations if ebase doesn't belong to KSEG0 Gregory CLEMENT
2023-12-12 16:34 ` [PATCH v5 14/22] dt-bindings: Add vendor prefix for Mobileye Vision Technologies Ltd Gregory CLEMENT
2023-12-12 16:34 ` [PATCH v5 15/22] dt-bindings: mips: cpus: Sort the entries Gregory CLEMENT
2023-12-12 16:34 ` [PATCH v5 16/22] dt-bindings: mips: cpu: Add I-Class I6500 Multiprocessor Core Gregory CLEMENT
2023-12-12 16:34 ` [PATCH v5 17/22] dt-bindings: mips: Add bindings for Mobileye SoCs Gregory CLEMENT
2023-12-12 16:34 ` [PATCH v5 18/22] dt-bindings: mfd: syscon: Document EyeQ5 OLB Gregory CLEMENT
2023-12-12 16:34 ` [PATCH v5 19/22] MIPS: mobileye: Add EyeQ5 dtsi Gregory CLEMENT
2023-12-12 16:34 ` [PATCH v5 20/22] MIPS: mobileye: Add EPM5 device tree Gregory CLEMENT
2023-12-12 16:34 ` Gregory CLEMENT [this message]
2023-12-14 9:46 ` [PATCH v5 21/22] MIPS: generic: Add support for Mobileye EyeQ5 Jiaxun Yang
2023-12-15 16:52 ` Gregory CLEMENT
2023-12-15 20:29 ` Jiaxun Yang
2023-12-12 16:34 ` [PATCH v5 22/22] MAINTAINERS: Add entry for Mobileye MIPS SoCs Gregory CLEMENT
2023-12-15 16:39 ` [PATCH v5 00/22] Add support for the Mobileye EyeQ5 SoC Gregory CLEMENT
2023-12-20 21:49 ` Thomas Bogendoerfer
2023-12-21 1:57 ` Jiaxun Yang
2023-12-21 7:57 ` Gregory CLEMENT
2023-12-21 9:13 ` Gregory CLEMENT
2023-12-21 14:40 ` Thomas Bogendoerfer
2023-12-21 14:55 ` Thomas Bogendoerfer
2023-12-21 15:26 ` Gregory CLEMENT
2023-12-21 16:55 ` Thomas Bogendoerfer
2023-12-21 22:25 ` Jiaxun Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231212163459.1923041-22-gregory.clement@bootlin.com \
--to=gregory.clement@bootlin.com \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=jiaxun.yang@flygoat.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=paulburton@kernel.org \
--cc=robh+dt@kernel.org \
--cc=tawfik.bayouk@mobileye.com \
--cc=theo.lebrun@bootlin.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=tsbogend@alpha.franken.de \
--cc=vladimir.kondratiev@mobileye.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).