LKML Archive on lore.kernel.org
 help / color / Atom feed
From: "Stephan Müller" <smueller@chronox.de>
To: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-crypto@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>,
	linux-api@vger.kernel.org,
	"Eric W. Biederman" <ebiederm@xmission.com>,
	"Alexander E. Patrakov" <patrakov@gmail.com>,
	"Ahmed S. Darwish" <darwish.07@gmail.com>,
	"Theodore Y. Ts'o" <tytso@mit.edu>, Willy Tarreau <w@1wt.eu>,
	Matthew Garrett <mjg59@srcf.ucam.org>,
	Vito Caputo <vcaputo@pengaru.com>,
	Andreas Dilger <adilger.kernel@dilger.ca>,
	Jan Kara <jack@suse.cz>, Ray Strode <rstrode@redhat.com>,
	William Jon McCann <mccann@jhu.edu>,
	zhangjs <zachary@baishancloud.com>,
	Andy Lutomirski <luto@kernel.org>,
	Florian Weimer <fweimer@redhat.com>,
	Lennart Poettering <mzxreary@0pointer.de>,
	Nicolai Stange <nstange@suse.de>,
	"Peter, Matthias" <matthias.peter@bsi.bund.de>,
	Marcelo Henrique Cerri <marcelo.cerri@canonical.com>,
	Roman Drahtmueller <draht@schaltsekun.de>,
	Neil Horman <nhorman@redhat.com>,
	Randy Dunlap <rdunlap@infradead.org>
Subject: [PATCH v26 09/12] LRNG - add Jitter RNG fast noise source
Date: Sat, 23 Nov 2019 21:34:00 +0100
Message-ID: <32805752.pDMCn23lB6@positron.chronox.de> (raw)
In-Reply-To: <2722222.P16TYeLAVu@positron.chronox.de>

The Jitter RNG fast noise source implemented as part of the kernel
crypto API is queried for 256 bits of entropy at the time the seed
buffer managed by the LRNG is about to be filled.

CC: "Eric W. Biederman" <ebiederm@xmission.com>
CC: "Alexander E. Patrakov" <patrakov@gmail.com>
CC: "Ahmed S. Darwish" <darwish.07@gmail.com>
CC: "Theodore Y. Ts'o" <tytso@mit.edu>
CC: Willy Tarreau <w@1wt.eu>
CC: Matthew Garrett <mjg59@srcf.ucam.org>
CC: Vito Caputo <vcaputo@pengaru.com>
CC: Andreas Dilger <adilger.kernel@dilger.ca>
CC: Jan Kara <jack@suse.cz>
CC: Ray Strode <rstrode@redhat.com>
CC: William Jon McCann <mccann@jhu.edu>
CC: zhangjs <zachary@baishancloud.com>
CC: Andy Lutomirski <luto@kernel.org>
CC: Florian Weimer <fweimer@redhat.com>
CC: Lennart Poettering <mzxreary@0pointer.de>
CC: Nicolai Stange <nstange@suse.de>
Reviewed-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
Reviewed-by: Roman Drahtmueller <draht@schaltsekun.de>
Tested-by: Roman Drahtmüller <draht@schaltsekun.de>
Tested-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
Tested-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
---
 drivers/char/lrng/Kconfig     | 11 +++++
 drivers/char/lrng/Makefile    |  1 +
 drivers/char/lrng/lrng_jent.c | 88 +++++++++++++++++++++++++++++++++++
 3 files changed, 100 insertions(+)
 create mode 100644 drivers/char/lrng/lrng_jent.c

diff --git a/drivers/char/lrng/Kconfig b/drivers/char/lrng/Kconfig
index 03e6e2ec356b..80fc723c67d2 100644
--- a/drivers/char/lrng/Kconfig
+++ b/drivers/char/lrng/Kconfig
@@ -80,4 +80,15 @@ config LRNG_KCAPI
 	  provided by the selected kernel crypto API RNG.
 endif # LRNG_DRNG_SWITCH
 
+config LRNG_JENT
+	bool "Enable Jitter RNG as LRNG Seed Source"
+	select CRYPTO_JITTERENTROPY
+	help
+	  The Linux RNG may use the Jitter RNG as noise source. Enabling
+	  this option enables the use of the Jitter RNG. Its default
+	  entropy level is 16 bits of entropy per 256 data bits delivered
+	  by the Jitter RNG. This entropy level can be changed at boot
+	  time or at runtime with the lrng_base.jitterrng configuration
+	  variable.
+
 endif # LRNG
diff --git a/drivers/char/lrng/Makefile b/drivers/char/lrng/Makefile
index 027b6ea51c20..a87d800c9aae 100644
--- a/drivers/char/lrng/Makefile
+++ b/drivers/char/lrng/Makefile
@@ -13,3 +13,4 @@ obj-$(CONFIG_SYSCTL)		+= lrng_proc.o
 obj-$(CONFIG_LRNG_DRNG_SWITCH)	+= lrng_switch.o
 obj-$(CONFIG_LRNG_DRBG)		+= lrng_drbg.o
 obj-$(CONFIG_LRNG_KCAPI)	+= lrng_kcapi.o
+obj-$(CONFIG_LRNG_JENT)		+= lrng_jent.o
diff --git a/drivers/char/lrng/lrng_jent.c b/drivers/char/lrng/lrng_jent.c
new file mode 100644
index 000000000000..43114a44b8f5
--- /dev/null
+++ b/drivers/char/lrng/lrng_jent.c
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+/*
+ * LRNG Fast Noise Source: Jitter RNG
+ *
+ * Copyright (C) 2016 - 2019, Stephan Mueller <smueller@chronox.de>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "lrng_internal.h"
+
+/*
+ * Estimated entropy of data is a 16th of LRNG_DRNG_SECURITY_STRENGTH_BITS.
+ * Albeit a full entropy assessment is provided for the noise source indicating
+ * that it provides high entropy rates and considering that it deactivates
+ * when it detects insufficient hardware, the chosen under estimation of
+ * entropy is considered to be acceptable to all reviewers.
+ */
+static u32 jitterrng = LRNG_DRNG_SECURITY_STRENGTH_BITS>>4;
+module_param(jitterrng, uint, 0644);
+MODULE_PARM_DESC(jitterrng, "Entropy in bits of 256 data bits from Jitter "
+			    "RNG noise source");
+
+/**
+ * Get Jitter RNG entropy
+ *
+ * @outbuf buffer to store entropy
+ * @outbuflen length of buffer
+ * @return > 0 on success where value provides the added entropy in bits
+ *	   0 if no fast source was available
+ */
+struct rand_data;
+struct rand_data *jent_lrng_entropy_collector(void);
+int jent_read_entropy(struct rand_data *ec, unsigned char *data,
+		      unsigned int len);
+static struct rand_data *lrng_jent_state;
+
+u32 lrng_get_jent(u8 *outbuf, unsigned int outbuflen)
+{
+	int ret;
+	u32 ent_bits = jitterrng;
+	unsigned long flags;
+	static DEFINE_SPINLOCK(lrng_jent_lock);
+	static int lrng_jent_initialized = 0;
+
+	spin_lock_irqsave(&lrng_jent_lock, flags);
+
+	if (!ent_bits || (lrng_jent_initialized == -1)) {
+		spin_unlock_irqrestore(&lrng_jent_lock, flags);
+		return 0;
+	}
+
+	if (!lrng_jent_initialized) {
+		lrng_jent_state = jent_lrng_entropy_collector();
+		if (!lrng_jent_state) {
+			jitterrng = 0;
+			lrng_jent_initialized = -1;
+			spin_unlock_irqrestore(&lrng_jent_lock, flags);
+			pr_info("Jitter RNG unusable on current system\n");
+			return 0;
+		}
+		lrng_jent_initialized = 1;
+		pr_debug("Jitter RNG working on current system\n");
+	}
+	ret = jent_read_entropy(lrng_jent_state, outbuf, outbuflen);
+	spin_unlock_irqrestore(&lrng_jent_lock, flags);
+
+	if (ret) {
+		pr_debug("Jitter RNG failed with %d\n", ret);
+		return 0;
+	}
+
+	/* Obtain entropy statement */
+	if (outbuflen != LRNG_DRNG_SECURITY_STRENGTH_BYTES)
+		ent_bits = (ent_bits * outbuflen<<3) /
+			   LRNG_DRNG_SECURITY_STRENGTH_BITS;
+	/* Cap entropy to buffer size in bits */
+	ent_bits = min_t(u32, ent_bits, outbuflen<<3);
+	pr_debug("obtained %u bits of entropy from Jitter RNG noise source\n",
+		 ent_bits);
+
+	return ent_bits;
+}
+
+u32 lrng_jent_entropylevel(void)
+{
+	return min_t(u32, jitterrng, LRNG_DRNG_SECURITY_STRENGTH_BITS);
+}
-- 
2.23.0





  parent reply index

Thread overview: 162+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-11 18:17 [PATCH v24 00/12] /dev/random - a new approach with full SP800-90B compliance Stephan Müller
2019-11-11 18:18 ` [PATCH v24 01/12] Linux Random Number Generator Stephan Müller
2019-11-11 23:54   ` Thomas Gleixner
2019-11-12  2:25     ` Stephan Müller
2019-11-12 10:16       ` Thomas Gleixner
2019-11-12 22:30   ` kbuild test robot
2019-11-12 23:15     ` Stephan Müller
2019-11-13  0:14   ` kbuild test robot
2019-11-13  0:25     ` Stephan Müller
2019-11-24  4:51   ` Sandy Harris
2019-11-24  9:02     ` Stephan Mueller
2019-11-11 18:19 ` [PATCH v24 02/12] LRNG - allocate one SDRNG instance per NUMA node Stephan Müller
2019-11-11 18:20 ` [PATCH v24 03/12] LRNG - /proc interface Stephan Müller
2019-11-11 18:20 ` [PATCH v24 04/12] LRNG - add switchable DRNG support Stephan Müller
2019-11-11 18:21 ` [PATCH v24 05/12] crypto: DRBG - externalize DRBG functions for LRNG Stephan Müller
2019-11-11 18:21 ` [PATCH v24 06/12] LRNG - add SP800-90A DRBG extension Stephan Müller
2019-11-11 18:22 ` [PATCH v24 07/12] LRNG - add kernel crypto API PRNG extension Stephan Müller
2019-11-11 18:23 ` [PATCH v24 08/12] crypto: provide access to a static Jitter RNG state Stephan Müller
2019-11-11 18:23 ` [PATCH v24 09/12] LRNG - add Jitter RNG fast noise source Stephan Müller
2019-11-11 18:24 ` [PATCH v24 10/12] LRNG - add TRNG support Stephan Müller
2019-11-11 18:26 ` [PATCH v24 11/12] LRNG - add SP800-90B compliant health tests Stephan Müller
2019-11-12 19:58   ` Alexander E. Patrakov
2019-11-12 23:11     ` Stephan Müller
2019-11-13  0:36     ` Stephan Müller
2019-11-13  6:02       ` Alexander E. Patrakov
2019-11-14  1:46         ` Stephan Müller
2019-11-11 18:26 ` [PATCH v24 12/12] LRNG - add interface for gathering of raw entropy Stephan Müller
2019-11-12 20:55   ` kbuild test robot
2019-11-12 23:13     ` Stephan Müller
2019-11-12 13:23 ` [PATCH v24 00/12] /dev/random - a new approach with full SP800-90B compliance Florian Weimer
2019-11-12 22:43   ` Stephan Müller
2019-11-12 15:33 ` Andy Lutomirski
2019-11-12 23:03   ` Stephan Müller
2019-11-12 23:26     ` Stephan Müller
2019-11-13  4:24   ` Stephan Müller
2019-11-13  4:48     ` Andy Lutomirski
2019-11-13 12:16       ` Stephan Müller
2019-11-16  9:32 ` [PATCH v25 00/12] /dev/random - a new approach with full SP800-90B Stephan Müller
2019-11-16  9:33   ` [PATCH v25 01/12] Linux Random Number Generator Stephan Müller
2019-11-16 11:25     ` Thomas Gleixner
2019-11-17 10:30       ` Stephan Müller
2019-11-16 18:13     ` Nicolai Stange
2019-11-17 11:01       ` Stephan Müller
2019-11-16  9:33   ` [PATCH v25 02/12] LRNG - allocate one SDRNG instance per NUMA node Stephan Müller
2019-11-16  9:34   ` [PATCH v25 03/12] LRNG - /proc interface Stephan Müller
2019-11-16 16:39     ` Andy Lutomirski
2019-11-17 12:16       ` Stephan Müller
2019-11-19 10:06         ` Andy Lutomirski
2019-11-19 10:55           ` Stephan Mueller
2019-11-19 17:40             ` Andy Lutomirski
2019-11-16 23:36     ` Eric W. Biederman
2019-11-17 11:37       ` Stephan Müller
2019-11-16  9:34   ` [PATCH v25 04/12] LRNG - add switchable DRNG support Stephan Müller
2019-11-16  9:35   ` [PATCH v25 05/12] crypto: DRBG - externalize DRBG functions for LRNG Stephan Müller
2019-11-16  9:35   ` [PATCH v25 06/12] LRNG - add SP800-90A DRBG extension Stephan Müller
2019-11-16  9:35   ` [PATCH v25 07/12] LRNG - add kernel crypto API PRNG extension Stephan Müller
2019-11-16  9:36   ` [PATCH v25 08/12] crypto: provide access to a static Jitter RNG state Stephan Müller
2019-11-16  9:36   ` [PATCH v25 09/12] LRNG - add Jitter RNG fast noise source Stephan Müller
2019-11-20 13:33     ` Neil Horman
2019-11-20 20:07       ` Stephan Müller
2019-11-21 14:19         ` Neil Horman
2019-11-21 14:33           ` Stephan Mueller
2019-11-16  9:37   ` [PATCH v25 10/12] LRNG - add TRNG support Stephan Müller
2019-11-16 16:09     ` Andy Lutomirski
2019-11-17 11:10       ` Stephan Müller
2019-11-19 10:07         ` Andy Lutomirski
2019-11-19 10:46           ` Stephan Mueller
2019-11-19 12:41           ` Greg Kroah-Hartman
2019-11-20  8:58             ` Stephan Müller
2019-11-20  9:55               ` Alexander E. Patrakov
2019-11-20 13:29               ` Greg Kroah-Hartman
2019-11-20 19:51                 ` Stephan Müller
2019-11-20 19:57                   ` Alexander E. Patrakov
2019-11-20 20:32                   ` Greg Kroah-Hartman
2019-11-21 13:06                     ` Stephan Müller
2019-11-16  9:37   ` [PATCH v25 11/12] LRNG - add SP800-90B compliant health tests Stephan Müller
2019-11-16  9:38   ` [PATCH v25 12/12] LRNG - add interface for gathering of raw entropy Stephan Müller
2019-11-16 16:51     ` Andy Lutomirski
2019-11-17 22:55       ` Stephan Müller
2019-11-19 10:04         ` Andy Lutomirski
2019-11-19 17:17     ` Randy Dunlap
2019-11-20  9:01       ` Stephan Müller
2019-11-21 12:18     ` Nicolai Stange
2019-11-21 15:18       ` Stephan Müller
2019-11-23 20:08   ` [PATCH v26 00/12] /dev/random - a new approach with full SP800-90B Stephan Müller
2019-11-23 20:10     ` [PATCH v26 01/12] Linux Random Number Generator Stephan Müller
2019-11-24 22:44       ` kbuild test robot
2019-11-25  6:29         ` Stephan Mueller
2019-11-23 20:10     ` [PATCH v26 02/12] LRNG - allocate one SDRNG instance per NUMA node Stephan Müller
2019-11-23 20:11     ` [PATCH v26 03/12] LRNG - sysctls and /proc interface Stephan Müller
2019-11-23 20:11     ` [PATCH v26 04/12] LRNG - add switchable DRNG support Stephan Müller
2019-11-23 20:31     ` [PATCH v26 05/12] crypto: DRBG - externalize DRBG functions for LRNG Stephan Müller
2019-11-23 20:32     ` [PATCH v26 06/12] LRNG - add SP800-90A DRBG extension Stephan Müller
2019-11-23 20:32     ` [PATCH v26 07/12] LRNG - add kernel crypto API PRNG extension Stephan Müller
2019-11-23 20:33     ` [PATCH v26 08/12] crypto: provide access to a static Jitter RNG state Stephan Müller
2019-11-23 20:34     ` Stephan Müller [this message]
2019-11-23 20:34     ` [PATCH v26 10/12] LRNG - add TRNG support Stephan Müller
2019-11-23 20:34     ` [PATCH v26 11/12] LRNG - add SP800-90B compliant health tests Stephan Müller
2019-11-23 20:35     ` [PATCH v26 12/12] LRNG - add interface for gathering of raw entropy Stephan Müller
2020-01-09  8:29     ` [PATCH v27 00/12] /dev/random - a new approach with full SP800-90B Stephan Müller
2020-01-09  8:30       ` [PATCH v27 01/12] Linux Random Number Generator Stephan Müller
2020-01-16  6:09         ` kbuild test robot
2020-01-16  6:41           ` Stephan Mueller
2020-01-09  8:31       ` [PATCH v27 02/12] LRNG - allocate one DRNG instance per NUMA node Stephan Müller
2020-01-09  8:31       ` [PATCH v27 03/12] LRNG - sysctls and /proc interface Stephan Müller
2020-01-09  8:32       ` [PATCH v27 04/12] LRNG - add switchable DRNG support Stephan Müller
2020-01-11  7:09         ` kbuild test robot
2020-01-12 10:12           ` Stephan Müller
2020-01-09  8:32       ` [PATCH v27 05/12] crypto: DRBG - externalize DRBG functions for LRNG Stephan Müller
2020-01-09  8:32       ` [PATCH v27 06/12] LRNG - add SP800-90A DRBG extension Stephan Müller
2020-01-09  8:33       ` [PATCH v27 07/12] LRNG - add kernel crypto API PRNG extension Stephan Müller
2020-01-09  8:33       ` [PATCH v27 08/12] crypto: provide access to a static Jitter RNG state Stephan Müller
2020-01-09  8:34       ` [PATCH v27 09/12] LRNG - add Jitter RNG fast noise source Stephan Müller
2020-01-10  0:24         ` Randy Dunlap
2020-01-10  7:45           ` Stephan Mueller
2020-01-09  8:34       ` [PATCH v27 10/12] LRNG - add SP800-90B compliant health tests Stephan Müller
2020-01-10  0:20         ` Randy Dunlap
2020-01-10  8:27           ` Stephan Mueller
2020-01-09  8:35       ` [PATCH v27 11/12] LRNG - add interface for gathering of raw entropy Stephan Müller
2020-01-09  8:35       ` [PATCH v27 12/12] LRNG - add power-on and runtime self-tests Stephan Müller
2020-01-10  0:22         ` Randy Dunlap
2020-01-10  7:48           ` Stephan Mueller
2020-01-13 10:39         ` Dan Carpenter
2020-01-13 10:46           ` Stephan Mueller
2020-01-15 10:31       ` [PATCH v28 00/12] /dev/random - a new approach with full SP800-90B Stephan Müller
2020-01-15 10:31         ` [PATCH v28 01/12] Linux Random Number Generator Stephan Müller
2020-01-16  0:11           ` Randy Dunlap
2020-01-16  7:22             ` Stephan Mueller
2020-01-15 10:32         ` [PATCH v28 02/12] LRNG - allocate one DRNG instance per NUMA node Stephan Müller
2020-01-15 10:32         ` [PATCH v28 03/12] LRNG - sysctls and /proc interface Stephan Müller
2020-01-15 10:32         ` [PATCH v28 04/12] LRNG - add switchable DRNG support Stephan Müller
2020-01-15 10:33         ` [PATCH v28 05/12] crypto: DRBG - externalize DRBG functions for LRNG Stephan Müller
2020-01-15 10:33         ` [PATCH v28 06/12] LRNG - add SP800-90A DRBG extension Stephan Müller
2020-01-16  0:14           ` Randy Dunlap
2020-01-16  6:55             ` Stephan Mueller
2020-01-15 10:34         ` [PATCH v28 07/12] LRNG - add kernel crypto API PRNG extension Stephan Müller
2020-01-16  0:15           ` Randy Dunlap
2020-01-16  6:54             ` Stephan Mueller
2020-01-15 10:34         ` [PATCH v28 08/12] crypto: provide access to a static Jitter RNG state Stephan Müller
2020-01-15 10:34         ` [PATCH v28 09/12] LRNG - add Jitter RNG fast noise source Stephan Müller
2020-01-16  0:17           ` Randy Dunlap
2020-01-16  6:51             ` Stephan Mueller
2020-01-15 10:35         ` [PATCH v28 10/12] LRNG - add SP800-90B compliant health tests Stephan Müller
2020-01-15 10:35         ` [PATCH v28 11/12] LRNG - add interface for gathering of raw entropy Stephan Müller
2020-01-16  0:18           ` Randy Dunlap
2020-01-16  6:43             ` Stephan Mueller
2020-01-16  6:48               ` Randy Dunlap
2020-01-16  6:52                 ` Stephan Mueller
2020-01-15 10:36         ` [PATCH v28 12/12] LRNG - add power-on and runtime self-tests Stephan Müller
2020-01-19 21:12         ` [PATCH v29 00/12] /dev/random - a new approach with full SP800-90B Stephan Müller
2020-01-19 21:13           ` [PATCH v29 01/12] Linux Random Number Generator Stephan Müller
2020-01-19 21:13           ` [PATCH v29 02/12] LRNG - allocate one DRNG instance per NUMA node Stephan Müller
2020-01-19 21:14           ` [PATCH v29 03/12] LRNG - sysctls and /proc interface Stephan Müller
2020-01-19 21:14           ` [PATCH v29 04/12] LRNG - add switchable DRNG support Stephan Müller
2020-01-19 21:15           ` [PATCH v29 05/12] crypto: DRBG - externalize DRBG functions for LRNG Stephan Müller
2020-01-19 21:16           ` [PATCH v29 06/12] LRNG - add SP800-90A DRBG extension Stephan Müller
2020-01-19 21:16           ` [PATCH v29 07/12] LRNG - add kernel crypto API PRNG extension Stephan Müller
2020-01-19 21:17           ` [PATCH v29 08/12] crypto: provide access to a static Jitter RNG state Stephan Müller
2020-01-19 21:18           ` [PATCH v29 09/12] LRNG - add Jitter RNG fast noise source Stephan Müller
2020-01-19 21:18           ` [PATCH v29 10/12] LRNG - add SP800-90B compliant health tests Stephan Müller
2020-01-19 21:19           ` [PATCH v29 11/12] LRNG - add interface for gathering of raw entropy Stephan Müller
2020-01-19 21:20           ` [PATCH v29 12/12] LRNG - add power-on and runtime self-tests Stephan Müller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=32805752.pDMCn23lB6@positron.chronox.de \
    --to=smueller@chronox.de \
    --cc=adilger.kernel@dilger.ca \
    --cc=arnd@arndb.de \
    --cc=darwish.07@gmail.com \
    --cc=draht@schaltsekun.de \
    --cc=ebiederm@xmission.com \
    --cc=fweimer@redhat.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jack@suse.cz \
    --cc=linux-api@vger.kernel.org \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luto@kernel.org \
    --cc=marcelo.cerri@canonical.com \
    --cc=matthias.peter@bsi.bund.de \
    --cc=mccann@jhu.edu \
    --cc=mjg59@srcf.ucam.org \
    --cc=mzxreary@0pointer.de \
    --cc=nhorman@redhat.com \
    --cc=nstange@suse.de \
    --cc=patrakov@gmail.com \
    --cc=rdunlap@infradead.org \
    --cc=rstrode@redhat.com \
    --cc=tytso@mit.edu \
    --cc=vcaputo@pengaru.com \
    --cc=w@1wt.eu \
    --cc=zachary@baishancloud.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git