From: Mark Lord <lkml@rtr.ca>
To: Greg KH <greg@kroah.com>
Cc: Oliver Neukum <oneukum@suse.de>, Adrian Bunk <bunk@stusta.de>,
Andrew Morton <akpm@linux-foundation.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [BUG} usb-serial regression in 2.6.21-rc2-git3
Date: Mon, 12 Mar 2007 12:11:36 -0400 [thread overview]
Message-ID: <45F57BB8.5010705@rtr.ca> (raw)
In-Reply-To: <45F579CF.7040802@rtr.ca>
Mark Lord wrote:
> Greg KH wrote:
>> Does userspace have it open when you suspend/resume?
>
> For the ooops I just posted, yes, I may have left Linux ckermit
> running on the serial port before the suspend.
Here's a retest under linux-2.6.21-rc3-git7,
doing suspend/resume (RAM) with ckermit open on the serial port.
(LONG, Ooops at the bottom).
12:06:54 kernel: Stopping tasks ... done.
12:06:54 kernel: Suspending console(s)
12:06:54 kernel: pl2303 5-5.3:1.0: no suspend for driver pl2303?
12:06:54 kernel: ACPI: PCI interrupt for device 0000:03:01.2 disabled
12:06:54 kernel: ACPI: PCI interrupt for device 0000:03:00.0 disabled
12:06:54 kernel: ACPI: PCI interrupt for device 0000:00:1f.2 disabled
12:06:54 kernel: ACPI: PCI interrupt for device 0000:00:1e.2 disabled
12:06:54 kernel: ACPI: PCI interrupt for device 0000:00:1d.7 disabled
12:06:54 kernel: ACPI: PCI interrupt for device 0000:00:1d.3 disabled
12:06:54 kernel: ACPI: PCI interrupt for device 0000:00:1d.2 disabled
12:06:54 kernel: ACPI: PCI interrupt for device 0000:00:1d.1 disabled
12:06:54 kernel: ACPI: PCI interrupt for device 0000:00:1d.0 disabled
12:06:54 kernel: Intel machine check architecture supported.
12:06:54 kernel: Intel machine check reporting enabled on CPU#0.
12:06:54 kernel: Back to C!
12:06:54 kernel: PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 2000d0d0, writing d0d0)
12:06:54 kernel: PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10010)
12:06:54 kernel: PCI: Setting latency timer of device 0000:00:01.0 to 64
12:06:54 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
12:06:54 kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64
12:06:54 kernel: usb usb1: root hub lost power or was reset
12:06:54 kernel: PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
12:06:54 kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 18
12:06:54 kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64
12:06:54 kernel: PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20a)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1d.1 at offset 8 (was 1, writing bf61)
12:06:54 kernel: usb usb2: root hub lost power or was reset
12:06:54 kernel: PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
12:06:54 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
12:06:54 kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64
12:06:54 kernel: PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 309)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1d.2 at offset 8 (was 1, writing bf41)
12:06:54 kernel: usb usb3: root hub lost power or was reset
12:06:54 kernel: PCI: Enabling device 0000:00:1d.3 (0000 -> 0001)
12:06:54 kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 17
12:06:54 kernel: PCI: Setting latency timer of device 0000:00:1d.3 to 64
12:06:54 kernel: PM: Writing back config space on device 0000:00:1d.3 at offset f (was 400, writing 407)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1d.3 at offset 8 (was 1, writing bf21)
12:06:54 kernel: usb usb4: root hub lost power or was reset
12:06:54 kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
12:06:54 kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64
12:06:54 kernel: usb usb5: root hub lost power or was reset
12:06:54 kernel: ehci_hcd 0000:00:1d.7: debug port 1
12:06:54 kernel: PCI: cache line size of 32 is not supported by device 0000:00:1d.7
12:06:54 kernel: PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 8bf18801)
12:06:54 NetworkManager: <information>^ISWITCH: terminating current connection 'eth0' because it's no longer valid.
12:06:54 NetworkManager: <information>^IDeactivating device eth0.
12:06:54 kernel: PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing dfc0dfc0)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 2280e0f0, writing 22802020)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20030300, writing 20070300)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100107)
12:06:54 kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64
12:06:54 kernel: PM: Writing back config space on device 0000:00:1e.2 at offset f (was 100, writing 10b)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1e.2 at offset 7 (was 0, writing dffffd00)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1e.2 at offset 6 (was 0, writing dffffe00)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1e.2 at offset 5 (was 1, writing ec41)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1e.2 at offset 4 (was 1, writing ed01)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1e.2 at offset 1 (was 2900000, writing 2900003)
12:06:54 kernel: ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 16
12:06:54 kernel: PCI: Setting latency timer of device 0000:00:1e.2 to 64
12:06:54 kernel: PM: Writing back config space on device 0000:00:1f.0 at offset 1 (was 2000007, writing 2000107)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20a)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1f.2 at offset 9 (was d0000, writing 0)
12:06:54 kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 18
12:06:54 kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64
12:06:54 kernel: PM: Writing back config space on device 0000:00:1f.3 at offset f (was 200, writing 20a)
12:06:54 kernel: PM: Writing back config space on device 0000:00:1f.3 at offset 1 (was 2800001, writing 2800101)
12:06:54 kernel: PM: Writing back config space on device 0000:01:00.0 at offset f (was 1ff, writing 10b)
12:06:54 kernel: PM: Writing back config space on device 0000:01:00.0 at offset c (was 0, writing dfe00000)
12:06:54 kernel: PM: Writing back config space on device 0000:01:00.0 at offset 3 (was 0, writing 10)
12:06:54 kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
12:06:54 kernel: PM: Writing back config space on device 0000:03:00.0 at offset f (was 100, writing 109)
12:06:54 kernel: PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 0, writing dfcfe000)
12:06:54 kernel: PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 4000)
12:06:54 kernel: PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100106)
12:06:54 kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 19
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.0 at offset f (was 7800100, writing 58001ff)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.0 at offset e (was 0, writing 24fc)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.0 at offset d (was 0, writing 2400)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.0 at offset c (was 0, writing 20fc)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.0 at offset b (was 0, writing 2000)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.0 at offset a (was 0, writing 8ffff000)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.0 at offset 9 (was 0, writing 8c000000)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.0 at offset 8 (was 0, writing 8bfff000)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.0 at offset 7 (was 0, writing 88000000)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.0 at offset 6 (was 0, writing b0070403)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.0 at offset 4 (was 0, writing dfc00000)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.0 at offset 3 (was 820000, writing 82a800)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.1 at offset 4 (was 0, writing dfcfc800)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.1 at offset 3 (was 800000, writing 804000)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.1 at offset 1 (was 2100000, writing 2100106)
12:06:54 kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dfcfc800-dfcfcfff] Max Packet=[2048] IR/IT contexts=[4/4]
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.2 at offset 4 (was 0, writing dfcfc700)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.2 at offset 3 (was 800000, writing 804000)
12:06:54 kernel: PM: Writing back config space on device 0000:03:01.2 at offset 1 (was 2100000, writing 2100106)
12:06:54 kernel: ACPI: PCI Interrupt 0000:03:01.2[C] -> GSI 17 (level, low) -> IRQ 18
12:06:54 kernel: PM: Writing back config space on device 0000:03:03.0 at offset f (was 18030100, writing 1803010a)
12:06:54 kernel: PM: Writing back config space on device 0000:03:03.0 at offset 4 (was 0, writing dfcfd000)
12:06:54 kernel: PM: Writing back config space on device 0000:03:03.0 at offset 3 (was 0, writing 4010)
12:06:54 kernel: PM: Writing back config space on device 0000:03:03.0 at offset 1 (was 2900000, writing 2900112)
12:06:54 kernel: pnp: Device 00:04 does not support activation.
12:06:54 kernel: pnp: Device 00:05 does not support activation.
12:06:54 kernel: usbdev5.2_ep00: PM: resume from 0, parent 5-5 still 2
12:06:54 kernel: hub 5-5:1.0: PM: resume from 2, parent 5-5 still 2
12:06:54 kernel: usbdev5.2_ep81: PM: resume from 0, parent 5-5:1.0 still 2
12:06:54 kernel: usbdev5.2: PM: resume from 0, parent 5-5 still 2
12:06:54 kernel: usb 5-5.3: PM: resume from 2, parent 5-5 still 2
12:06:54 kernel: usbdev5.3_ep00: PM: resume from 0, parent 5-5.3 still 2
12:06:54 kernel: pl2303 5-5.3:1.0: PM: resume from 2, parent 5-5.3 still 2
12:06:54 kernel: usbdev5.3_ep81: PM: resume from 0, parent 5-5.3:1.0 still 2
12:06:54 kernel: usbdev5.3_ep02: PM: resume from 0, parent 5-5.3:1.0 still 2
12:06:54 kernel: usbdev5.3_ep83: PM: resume from 0, parent 5-5.3:1.0 still 2
12:06:54 kernel: usbdev5.3: PM: resume from 0, parent 5-5.3 still 2
12:06:54 kernel: usb 5-5.4: PM: resume from 2, parent 5-5 still 2
12:06:54 kernel: usbdev5.4_ep00: PM: resume from 0, parent 5-5.4 still 2
12:06:54 kernel: usbhid 5-5.4:1.0: PM: resume from 2, parent 5-5.4 still 2
12:06:54 kernel: usbdev5.4_ep81: PM: resume from 0, parent 5-5.4:1.0 still 2
12:06:54 kernel: usbdev5.4: PM: resume from 0, parent 5-5.4 still 2
12:06:54 kernel: pl2303 ttyUSB0: PM: resume from 0, parent 5-5.3:1.0 still 2
12:06:54 kernel: Restarting tasks ... done.
12:06:54 kernel: usb 5-5: USB disconnect, address 2
12:06:54 kernel: usb 5-5.3: USB disconnect, address 3
12:06:54 kernel: pl2303 5-5.3:1.0: device disconnected
12:06:54 kernel: usb 5-5.4: USB disconnect, address 4
12:06:54 kernel: ata1.00: configured for UDMA/100
12:06:54 kernel: SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
12:06:54 kernel: sda: Write Protect is off
12:06:54 kernel: sda: Mode Sense: 00 3a 00 00
12:06:54 dhclient: DHCPRELEASE on eth0 to 10.0.0.2 port 67
12:06:54 kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
12:06:54 dhcdbd: dhco_value_from_text: Non ascii char outside valid hex string: 0
12:06:54 dhcdbd: dhco_input_option: Value silvy cannot be converted to type X
12:06:54 dhcdbd: dhco_parse_option_settings: bad option setting: old_host_name = silvy
12:06:54 kernel: usb 5-5: new high speed USB device using ehci_hcd and address 5
12:06:54 kernel: usb 5-5: configuration #1 chosen from 1 choice
12:06:55 kernel: hub 5-5:1.0: USB hub found
12:06:55 kernel: hub 5-5:1.0: 4 ports detected
12:06:55 kernel: ata2.00: configured for UDMA/33
12:06:55 kernel: [drm] Loading R300 Microcode
12:06:55 kernel: usb 5-5.3: new full speed USB device using ehci_hcd and address 6
12:06:55 kernel: usb 5-5.3: configuration #1 chosen from 1 choice
12:06:55 kernel: pl2303 5-5.3:1.0: pl2303 converter detected
12:06:55 kernel: usb 5-5.3: pl2303 converter now attached to ttyUSB1
12:06:55 NetworkManager: nm_device_is_802_3_ethernet: assertion `dev != NULL' failed
12:06:55 NetworkManager: nm_device_is_802_11_wireless: assertion `dev != NULL' failed
12:06:55 NetworkManager: <information>^Imatch
12:06:55 NetworkManager: <information>^Imatch
12:06:55 kernel: usb 5-5.4: new low speed USB device using ehci_hcd and address 7
12:06:55 kernel: usb 5-5.4: configuration #1 chosen from 1 choice
12:06:55 kernel: input: Logitech Optical USB Mouse as /class/input/input8
12:06:55 kernel: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.7-5.4
12:06:56 kernel: b44: eth0: Link is up at 100 Mbps, full duplex.
12:06:56 kernel: b44: eth0: Flow control is off for TX and off for RX.
12:06:56 NetworkManager: <information>^IWill activate wired connection 'eth0' because it now has a link.
12:06:56 NetworkManager: <information>^ISWITCH: no current connection, found better connection 'eth0'.
12:06:56 NetworkManager: <information>^IWill activate connection 'eth0'.
12:06:56 NetworkManager: <information>^IDevice eth0 activation scheduled...
12:06:56 NetworkManager: <information>^IActivation (eth0) started...
12:06:56 NetworkManager: <information>^IActivation (eth0) Stage 1 of 5 (Device Prepare) scheduled...
12:06:56 NetworkManager: <information>^IActivation (eth0) Stage 1 of 5 (Device Prepare) started...
12:06:56 NetworkManager: <information>^IActivation (eth0) Stage 2 of 5 (Device Configure) scheduled...
12:06:56 NetworkManager: <information>^IActivation (eth0) Stage 1 of 5 (Device Prepare) complete.
12:06:56 NetworkManager: <information>^IActivation (eth0) Stage 2 of 5 (Device Configure) starting...
12:06:56 NetworkManager: <information>^IActivation (eth0) Stage 2 of 5 (Device Configure) successful.
12:06:56 NetworkManager: <information>^IActivation (eth0) Stage 3 of 5 (IP Configure Start) scheduled.
12:06:56 NetworkManager: <information>^IActivation (eth0) Stage 2 of 5 (Device Configure) complete.
12:06:56 NetworkManager: <information>^IActivation (eth0) Stage 3 of 5 (IP Configure Start) started...
12:06:56 NetworkManager: <information>^Imatch
12:06:57 NetworkManager: <information>^IActivation (eth0) Beginning DHCP transaction.
12:06:57 NetworkManager: <information>^IActivation (eth0) Stage 3 of 5 (IP Configure Start) complete.
12:06:57 NetworkManager: <information>^IDHCP daemon state is now 12 (successfully started) for interface eth0
12:06:58 NetworkManager: <information>^IDHCP daemon state is now 1 (starting) for interface eth0
12:06:59 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
12:06:59 dhclient: DHCPOFFER from 10.0.0.2
12:06:59 dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67
12:06:59 dhclient: DHCPACK from 10.0.0.2
12:06:59 dhclient: bound to 10.0.0.14 -- renewal in 34884 seconds.
12:06:59 kernel: pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
12:06:59 kernel: BUG: unable to handle kernel NULL pointer dereference at virtual address 00000168
12:06:59 kernel: printing eip:
12:06:59 kernel: f89fe1f6
12:06:59 kernel: *pde = 00000000
12:06:59 kernel: Oops: 0000 [#1]
12:06:59 kernel: PREEMPT
12:06:59 kernel: Modules linked in: radeon drm nfsd exportfs lockd nfs_acl sunrpc acpi_cpufreq cpufreq_ondemand cpufreq_powersave cpufreq_userspace cpufreq_stats freq_table cpufreq_conservative ac fan button thermal video battery container processor rfcomm l2cap bluetooth cfq_iosched deflate zlib_deflate twofish twofish_common serpent blowfish des cbc ecb blkcipher aes xcbc sha256 sha1 crypto_null af_key af_packet sbp2 usbhid hid pl2303 usbserial mousedev pcmcia snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer ipw2200 snd ieee80211 ieee80211_crypt ohci1394 serio_raw psmouse soundcore snd_page_alloc pcspkr sdhci firmware_class ahci ieee1394 yenta_socket rsrc_nonstatic pcmcia_core ehci_hcd mmc_core b44 mii uhci_hcd usbcore intel_agp agpgart sg sr_mod cdrom unix
12:06:59 kernel: CPU: 0
12:06:59 kernel: EIP: 0060:[<f89fe1f6>] Not tainted VLI
12:06:59 kernel: EFLAGS: 00010297 (2.6.21-rc3-git7 #7)
12:06:59 kernel: EIP is at pl2303_shutdown+0x37/0x70 [pl2303]
12:06:59 kernel: eax: 00000000 ebx: f7560d80 ecx: c20df5c0 edx: f89fe1bf
12:06:59 kernel: esi: f7560d80 edi: 00000000 ebp: f7560d80 esp: f5d45e78
12:06:59 kernel: ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068
12:06:59 kernel: Process kermit (pid: 4403, ti=f5d44000 task=f5cdb0b0 task.ti=f5d44000)
12:06:59 kernel: Stack: c01ab1b5 f7b39a78 00000000 f7560d80 00000001 00000000 00000000 f8a29ca1
12:06:59 kernel: 00200200 f7b39a00 f7b39a08 f5f71bc0 f7560db4 f8a29c18 c01ab1b5 c01e5b0c
12:06:59 kernel: f5f634cc f5f63400 f5f63400 f5f63400 f5f71bc0 c01e7758 f6c4bc40 c0138a0a
12:06:59 kernel: Call Trace:
12:06:59 kernel: [kref_put+95/110] kref_put+0x5f/0x6e
12:06:59 kernel: [<f8a29ca1>] destroy_serial+0x89/0x122 [usbserial]
12:06:59 kernel: [<f8a29c18>] destroy_serial+0x0/0x122 [usbserial]
12:06:59 kernel: [kref_put+95/110] kref_put+0x5f/0x6e
12:06:59 kernel: [tty_fasync+60/180] tty_fasync+0x3c/0xb4
12:06:59 kernel: [release_dev+484/1496] release_dev+0x1e4/0x5d8
12:06:59 kernel: [find_get_page+21/69] find_get_page+0x15/0x45
12:06:59 kernel: [filemap_nopage+385/726] filemap_nopage+0x181/0x2d6
12:06:59 kernel: [pty_write+43/53] pty_write+0x2b/0x35
12:06:59 kernel: [getnstimeofday+48/216] getnstimeofday+0x30/0xd8
12:06:59 kernel: [enqueue_hrtimer+256/268] enqueue_hrtimer+0x100/0x10c
12:06:59 kernel: [tty_release+15/24] tty_release+0xf/0x18
12:06:59 kernel: [__fput+150/336] __fput+0x96/0x150
12:06:59 kernel: [filp_close+79/86] filp_close+0x4f/0x56
12:06:59 kernel: [sys_close+117/183] sys_close+0x75/0xb7
12:06:59 kernel: [sysenter_past_esp+95/133] sysenter_past_esp+0x5f/0x85
12:06:59 kernel: =======================
12:06:59 kernel: Code: 2c a0 f8 00 74 1c c7 44 24 08 2f 04 a0 f8 c7 44 24 04 33 05 a0 f8 c7 04 24 09 06 a0 f8 e8 8f 9e 71 c7 89 ee 31 ff eb 2c 8b 46 14 <8b> 98 68 01 00 00 85 db 74 1b 8b 03 e8 f9 fd ff ff 89 d8 e8 95
12:06:59 kernel: EIP: [<f89fe1f6>] pl2303_shutdown+0x37/0x70 [pl2303] SS:ESP 0068:f5d45e78
next prev parent reply other threads:[~2007-03-12 16:11 UTC|newest]
Thread overview: 187+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-28 5:16 Linux 2.6.21-rc2 Linus Torvalds
2007-02-28 5:50 ` Gabriel C
2007-02-28 7:13 ` [PATCH] affinity is not defined in non-smp kernels - i386 Fernando Luis Vázquez Cao
2007-02-28 7:16 ` [PATCH] affinity is not defined in non-smp kernels - i386 (v2) Fernando Luis Vázquez Cao
2007-02-28 7:24 ` [PATCH] affinity is not defined in non-smp kernels - i386 Eric W. Biederman
2007-02-28 17:31 ` Bill Davidsen
2007-02-28 18:21 ` Eric W. Biederman
2007-02-28 18:30 ` Linus Torvalds
2007-02-28 7:42 ` [PATCH] affinity is not defined in non-smp kernels - i386 (v2) Fernando Luis Vázquez Cao
2007-02-28 7:17 ` [PATCH] affinity is not defined in non-smp kernels - x86_64 Fernando Luis Vázquez Cao
2007-02-28 7:23 ` Linux 2.6.21-rc2 David Brown
2007-02-28 7:39 ` Brice Goglin
2007-02-28 13:09 ` Eric W. Biederman
2007-02-28 16:44 ` David Brown
2007-02-28 17:07 ` Randy Dunlap
2007-02-28 7:41 ` [PATCH] affinity is not defined in non-smp kernels - x86_64 Fernando Luis Vázquez Cao
2007-02-28 7:59 ` Linux 2.6.21-rc2 Damien Wyart
2007-03-05 1:50 ` [1/6] 2.6.21-rc2: known regressions Adrian Bunk
2007-03-05 2:26 ` Andrew Morton
2007-03-05 3:35 ` Greg KH
2007-03-06 0:55 ` Johannes Berg
2007-03-05 4:01 ` Mark Lord
2007-03-05 4:34 ` Greg KH
2007-03-05 12:42 ` Marcel Holtmann
2007-03-05 4:34 ` [BUG} usb regression in 2.6.21-rc2-git3 Mark Lord
2007-03-05 4:37 ` [BUG] sdhci regression in 2.6.21-rc2 Mark Lord
2007-03-05 5:36 ` Pierre Ossman
2007-03-05 14:25 ` Mark Lord
2007-03-05 15:19 ` Mark Lord
2007-03-06 4:17 ` Andrew Morton
2007-03-06 5:47 ` Pierre Ossman
2007-03-06 6:09 ` Andrew Morton
2007-03-06 7:23 ` Pierre Ossman
2007-03-05 15:20 ` Pierre Ossman
2007-03-05 15:23 ` Pierre Ossman
2007-03-05 15:35 ` Mark Lord
2007-03-05 16:00 ` Pierre Ossman
2007-03-05 16:18 ` Mark Lord
2007-03-05 4:43 ` [BUG} usb regression in 2.6.21-rc2-git3 Mark Lord
2007-03-12 14:56 ` [BUG} usb-serial " Mark Lord
2007-03-12 15:06 ` Oliver Neukum
2007-03-12 15:13 ` Mark Lord
2007-03-12 15:27 ` Oliver Neukum
2007-03-12 15:29 ` Greg KH
2007-03-12 15:38 ` Oliver Neukum
2007-03-12 16:03 ` Mark Lord
2007-03-12 16:10 ` Greg KH
2007-03-12 16:22 ` Mark Lord
2007-03-12 16:11 ` Mark Lord [this message]
2007-03-12 16:14 ` Mark Lord
2007-03-12 16:27 ` Mark Lord
2007-03-12 16:50 ` Mark Lord
2007-03-12 18:48 ` Oliver Neukum
2007-03-12 20:22 ` [PATCH] usb-serial regression (Oops) in 2.6.21-rc* Mark Lord
2007-03-12 20:33 ` Greg KH
2007-03-12 22:20 ` Mark Lord
2007-03-12 22:42 ` Jim Radford
2007-03-12 22:59 ` [PATCH] usb-serial regression fix Jim Radford
2007-03-13 0:18 ` Greg KH
2007-03-13 0:41 ` Jim Radford
2007-03-13 1:55 ` Mark Lord
2007-03-13 9:14 ` Jim Radford
2007-03-13 10:14 ` Oliver Neukum
2007-03-13 13:39 ` Mark Lord
2007-03-13 13:50 ` Oliver Neukum
2007-03-13 13:55 ` Mark Lord
2007-03-13 15:30 ` Jim Radford
2007-03-13 16:35 ` Mark Lord
2007-03-12 16:28 ` [BUG} usb-serial regression in 2.6.21-rc2-git3 Oliver Neukum
2007-03-12 15:31 ` Greg KH
2007-03-07 11:06 ` [1/6] 2.6.21-rc2: known regressions Jeff Garzik
2007-03-07 22:17 ` Albert Hopkins
2007-03-05 1:50 ` [2/6] " Adrian Bunk
2007-03-07 11:09 ` Jeff Garzik
2007-03-07 16:10 ` Linus Torvalds
2007-03-08 12:03 ` Ash Milsted
2007-03-08 12:31 ` Michael S. Tsirkin
2007-03-08 15:11 ` Jeff Chua
2007-03-08 18:01 ` Linus Torvalds
2007-03-08 19:06 ` Ingo Molnar
2007-03-08 19:10 ` Ingo Molnar
2007-03-08 19:47 ` Michael S. Tsirkin
2007-03-08 20:10 ` Ingo Molnar
2007-03-08 19:25 ` Ingo Molnar
2007-03-08 23:07 ` Ingo Molnar
2007-03-08 23:12 ` Ingo Molnar
2007-03-08 23:28 ` Ingo Molnar
2007-03-08 23:49 ` Linus Torvalds
2007-03-09 10:56 ` Ingo Molnar
2007-03-09 18:00 ` Linus Torvalds
2007-03-09 11:19 ` Pavel Machek
2007-03-18 16:07 ` Ingo Molnar
2007-03-18 16:40 ` [linux-pm] " Jim Gettys
2007-03-19 19:08 ` BSOD (was: [2/6] 2.6.21-rc2: known regressions) Pete Zaitcev
2007-03-19 19:38 ` BSOD David Miller
2007-03-19 19:54 ` BSOD Jesse Barnes
2007-03-19 20:05 ` BSOD David Miller
2007-03-19 20:20 ` BSOD Jesse Barnes
2007-03-19 20:20 ` BSOD Jim Gettys
2007-03-20 9:19 ` BSOD Paul Mackerras
2007-03-20 20:33 ` BSOD Jim Gettys
2007-03-19 20:33 ` [linux-pm] [2/6] 2.6.21-rc2: known regressions Bill Davidsen
2007-03-19 22:08 ` Jim Gettys
2007-03-20 14:44 ` Bill Davidsen
2007-03-09 17:48 ` Johannes Stezenbach
2007-03-09 23:35 ` Pavel Machek
2007-03-10 9:01 ` Ingo Molnar
2007-03-10 11:43 ` Stefan Seyfried
2007-03-10 13:53 ` Johannes Stezenbach
2007-03-10 15:18 ` Ingo Molnar
2007-03-10 22:08 ` Pavel Machek
2007-03-11 8:20 ` Ingo Molnar
2007-03-12 6:34 ` Stefan Seyfried
2007-03-10 22:04 ` s2ram (was Re: [2/6] 2.6.21-rc2: known regressions) Pavel Machek
2007-03-08 19:46 ` [2/6] 2.6.21-rc2: known regressions Michael S. Tsirkin
2007-03-08 19:57 ` Michael S. Tsirkin
[not found] ` <20070311120802.GA8823@elte.hu>
2007-03-12 20:20 ` Michael S. Tsirkin
2007-03-17 21:41 ` Michael S. Tsirkin
2007-03-17 22:33 ` Thomas Gleixner
2007-03-21 17:28 ` Michael S. Tsirkin
2007-03-05 1:50 ` [3/6] " Adrian Bunk
2007-03-05 3:58 ` Michal Jaegermann
2007-03-06 17:08 ` Alan Cox
2007-03-07 11:12 ` Jeff Garzik
2007-03-10 1:09 ` Mathieu Bérard
2007-03-10 4:11 ` and try remove another quirk on this computers " Sergio Monteiro Basto
2007-03-10 5:41 ` Linus Torvalds
2007-03-11 4:32 ` Sergio Monteiro Basto
2007-03-12 11:37 ` Tejun Heo
2007-03-13 12:31 ` Mathieu Bérard
2007-03-13 12:41 ` Tejun Heo
2007-03-13 20:56 ` Mathieu Bérard
2007-03-14 6:07 ` Tejun Heo
2007-03-14 10:49 ` Mathieu Bérard
2007-03-05 1:50 ` [4/6] " Adrian Bunk
2007-03-05 10:35 ` Antonino A. Daplas
2007-03-05 15:06 ` Andrew
2007-03-08 23:28 ` Len Brown
2007-03-09 19:25 ` Andrew
2007-03-05 12:21 ` Richard Purdie
2007-03-05 1:50 ` [5/6] " Adrian Bunk
2007-03-05 7:57 ` Ingo Molnar
2007-03-05 8:13 ` Andrew Morton
2007-03-05 15:25 ` Daniel Walker
2007-03-05 15:27 ` Ingo Molnar
2007-03-05 16:42 ` Daniel Walker
2007-03-05 19:30 ` Ingo Molnar
2007-03-05 16:14 ` Bill Davidsen
2007-03-05 16:21 ` Ingo Molnar
2007-03-05 23:12 ` Adrian Bunk
2007-03-05 23:43 ` Thomas Gleixner
2007-03-05 23:45 ` Linus Torvalds
2007-03-06 0:25 ` Thomas Gleixner
2007-03-06 6:49 ` Soeren Sonnenburg
2007-03-06 7:49 ` Soeren Sonnenburg
2007-03-06 0:38 ` Linus Torvalds
2007-03-06 1:02 ` Thomas Gleixner
2007-03-06 1:31 ` Linus Torvalds
2007-03-06 2:18 ` Linus Torvalds
2007-03-06 7:25 ` Ingo Molnar
2007-03-06 8:09 ` Thomas Gleixner
2007-03-06 10:33 ` Michael S. Tsirkin
2007-03-06 10:37 ` Ingo Molnar
2007-03-06 10:46 ` Michael S. Tsirkin
2007-03-06 11:32 ` Ingo Molnar
2007-03-06 12:20 ` Michael S. Tsirkin
2007-03-06 16:44 ` Linus Torvalds
2007-03-06 17:05 ` Ingo Molnar
2007-03-06 17:29 ` [PATCH] highres: do not run the TIMER_SOFTIRQ after switching to highres mode Thomas Gleixner
2007-03-06 17:41 ` Linus Torvalds
2007-03-16 15:18 ` [5/6] 2.6.21-rc2: known regressions Randy Dunlap
2007-03-06 11:36 ` Soeren Sonnenburg
2007-03-06 12:07 ` Ingo Molnar
2007-03-06 12:15 ` Michael S. Tsirkin
2007-03-06 12:51 ` Ingo Molnar
2007-03-06 12:55 ` Michael S. Tsirkin
2007-03-06 13:03 ` Ingo Molnar
2007-03-06 13:09 ` Thomas Gleixner
2007-03-06 12:09 ` Jeff Chua
2007-03-11 17:32 ` Pavel Machek
2007-03-06 10:33 ` Michael S. Tsirkin
2007-03-05 1:50 ` [6/6] " Adrian Bunk
2007-03-05 2:07 ` David Miller
2007-03-05 2:26 ` Adrian Bunk
2007-03-05 2:29 ` David Miller
2007-03-05 4:42 ` David Miller
2007-03-05 3:32 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45F57BB8.5010705@rtr.ca \
--to=lkml@rtr.ca \
--cc=akpm@linux-foundation.org \
--cc=bunk@stusta.de \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=oneukum@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).