linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org,
	Sean Christopherson <sean.j.christopherson@intel.com>,
	Marc Zyngier <Marc.Zyngier@arm.com>,
	Christian Borntraeger <borntraeger@de.ibm.com>
Subject: Re: [PATCH v4 30/30] KVM: selftests: Add test to populate a VM with the max possible guest mem
Date: Tue, 8 Mar 2022 15:47:26 +0100	[thread overview]
Message-ID: <63f4a488-87f1-097f-95d5-f85e46786740@redhat.com> (raw)
In-Reply-To: <20220303193842.370645-31-pbonzini@redhat.com>

On 3/3/22 20:38, Paolo Bonzini wrote:
> From: Sean Christopherson<seanjc@google.com>
> 
> Add a selftest that enables populating a VM with the maximum amount of
> guest memory allowed by the underlying architecture.  Abuse KVM's
> memslots by mapping a single host memory region into multiple memslots so
> that the selftest doesn't require a system with terabytes of RAM.
> 
> Default to 512gb of guest memory, which isn't all that interesting, but
> should work on all MMUs and doesn't take an exorbitant amount of memory
> or time.  E.g. testing with ~64tb of guest memory takes the better part
> of an hour, and requires 200gb of memory for KVM's page tables when using
> 4kb pages.

I couldn't quite run this on a laptop, so I'll tune it down to 128gb and 
3/4 of the available CPUs.

> To inflicit maximum abuse on KVM' MMU, default to 4kb pages (or whatever
> the not-hugepage size is) in the backing store (memfd).  Use memfd for
> the host backing store to ensure that hugepages are guaranteed when
> requested, and to give the user explicit control of the size of hugepage
> being tested.
> 
> By default, spin up as many vCPUs as there are available to the selftest,
> and distribute the work of dirtying each 4kb chunk of memory across all
> vCPUs.  Dirtying guest memory forces KVM to populate its page tables, and
> also forces KVM to write back accessed/dirty information to struct page
> when the guest memory is freed.
> 
> On x86, perform two passes with a MMU context reset between each pass to
> coerce KVM into dropping all references to the MMU root, e.g. to emulate
> a vCPU dropping the last reference.  Perform both passes and all
> rendezvous on all architectures in the hope that arm64 and s390x can gain
> similar shenanigans in the future.

Did you actually test aarch64 (not even asking about s390 :))?  For now 
let's only add it for x86.

> +			TEST_ASSERT(nr_vcpus, "#DE");

srsly? :)

Paolo


  reply	other threads:[~2022-03-08 14:48 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-03 19:38 [PATCH v4 00/30] KVM: x86/mmu: Overhaul TDP MMU zapping and flushing Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 01/30] KVM: x86/mmu: Check for present SPTE when clearing dirty bit in TDP MMU Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 02/30] KVM: x86/mmu: Fix wrong/misleading comments in TDP MMU fast zap Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 03/30] KVM: x86/mmu: Formalize TDP MMU's (unintended?) deferred TLB flush logic Paolo Bonzini
2022-03-03 23:39   ` Mingwei Zhang
2022-03-03 19:38 ` [PATCH v4 04/30] KVM: x86/mmu: Document that zapping invalidated roots doesn't need to flush Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 05/30] KVM: x86/mmu: Require mmu_lock be held for write in unyielding root iter Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 06/30] KVM: x86/mmu: only perform eager page splitting on valid roots Paolo Bonzini
2022-03-03 20:03   ` Sean Christopherson
2022-03-03 19:38 ` [PATCH v4 07/30] KVM: x86/mmu: do not allow readers to acquire references to invalid roots Paolo Bonzini
2022-03-03 20:12   ` Sean Christopherson
2022-03-03 19:38 ` [PATCH v4 08/30] KVM: x86/mmu: Check for !leaf=>leaf, not PFN change, in TDP MMU SP removal Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 09/30] KVM: x86/mmu: Batch TLB flushes from TDP MMU for MMU notifier change_spte Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 10/30] KVM: x86/mmu: Drop RCU after processing each root in MMU notifier hooks Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 11/30] KVM: x86/mmu: Add helpers to read/write TDP MMU SPTEs and document RCU Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 12/30] KVM: x86/mmu: WARN if old _or_ new SPTE is REMOVED in non-atomic path Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 13/30] KVM: x86/mmu: Refactor low-level TDP MMU set SPTE helper to take raw values Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 14/30] KVM: x86/mmu: Zap only the target TDP MMU shadow page in NX recovery Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 15/30] KVM: x86/mmu: Skip remote TLB flush when zapping all of TDP MMU Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 16/30] KVM: x86/mmu: Add dedicated helper to zap TDP MMU root shadow page Paolo Bonzini
2022-03-04  0:07   ` Mingwei Zhang
2022-03-03 19:38 ` [PATCH v4 17/30] KVM: x86/mmu: Require mmu_lock be held for write to zap TDP MMU range Paolo Bonzini
2022-03-04  0:14   ` Mingwei Zhang
2022-03-03 19:38 ` [PATCH v4 18/30] KVM: x86/mmu: Zap only TDP MMU leafs in kvm_zap_gfn_range() Paolo Bonzini
2022-03-04  1:16   ` Mingwei Zhang
2022-03-04 16:11     ` Sean Christopherson
2022-03-04 18:00       ` Mingwei Zhang
2022-03-04 18:42         ` Sean Christopherson
2022-03-11 15:09   ` Vitaly Kuznetsov
2022-03-13 18:40   ` Mingwei Zhang
2022-03-25 15:13     ` Sean Christopherson
2022-03-26 18:10       ` Mingwei Zhang
2022-03-28 15:06         ` Sean Christopherson
2022-03-03 19:38 ` [PATCH v4 19/30] KVM: x86/mmu: Do remote TLB flush before dropping RCU in TDP MMU resched Paolo Bonzini
2022-03-04  1:19   ` Mingwei Zhang
2022-03-03 19:38 ` [PATCH v4 20/30] KVM: x86/mmu: Defer TLB flush to caller when freeing TDP MMU shadow pages Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 21/30] KVM: x86/mmu: Zap invalidated roots via asynchronous worker Paolo Bonzini
2022-03-03 20:54   ` Sean Christopherson
2022-03-03 21:06     ` Sean Christopherson
2022-03-03 21:20   ` Sean Christopherson
2022-03-03 21:32     ` Sean Christopherson
2022-03-04  6:48       ` Paolo Bonzini
2022-03-04 16:02         ` Sean Christopherson
2022-03-04 18:11           ` Paolo Bonzini
2022-03-05  0:34             ` Sean Christopherson
2022-03-05 19:53               ` Paolo Bonzini
2022-03-08 21:29                 ` Sean Christopherson
2022-03-11 17:50                   ` Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 22/30] KVM: x86/mmu: Allow yielding when zapping GFNs for defunct TDP MMU root Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 23/30] KVM: x86/mmu: Zap roots in two passes to avoid inducing RCU stalls Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 24/30] KVM: x86/mmu: Zap defunct roots via asynchronous worker Paolo Bonzini
2022-03-03 22:08   ` Sean Christopherson
2022-03-03 19:38 ` [PATCH v4 25/30] KVM: x86/mmu: Check for a REMOVED leaf SPTE before making the SPTE Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 26/30] KVM: x86/mmu: WARN on any attempt to atomically update REMOVED SPTE Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 27/30] KVM: selftests: Move raw KVM_SET_USER_MEMORY_REGION helper to utils Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 28/30] KVM: selftests: Split out helper to allocate guest mem via memfd Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 29/30] KVM: selftests: Define cpu_relax() helpers for s390 and x86 Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 30/30] KVM: selftests: Add test to populate a VM with the max possible guest mem Paolo Bonzini
2022-03-08 14:47   ` Paolo Bonzini [this message]
2022-03-08 15:36     ` Christian Borntraeger
2022-03-08 21:09     ` Sean Christopherson
2022-03-08 17:25 ` [PATCH v4 00/30] KVM: x86/mmu: Overhaul TDP MMU zapping and flushing Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=63f4a488-87f1-097f-95d5-f85e46786740@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=Marc.Zyngier@arm.com \
    --cc=borntraeger@de.ibm.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sean.j.christopherson@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).