linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mingwei Zhang <mizhang@google.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: linux-kernel@vger.kernel.org, kvm@vger.kernel.org,
	Sean Christopherson <seanjc@google.com>,
	Vitaly Kuznetsov <vkuznets@redhat.com>,
	Wanpeng Li <wanpengli@tencent.com>,
	Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
	David Hildenbrand <david@redhat.com>,
	David Matlack <dmatlack@google.com>,
	Ben Gardon <bgardon@google.com>
Subject: Re: [PATCH v4 03/30] KVM: x86/mmu: Formalize TDP MMU's (unintended?) deferred TLB flush logic
Date: Thu, 3 Mar 2022 23:39:30 +0000	[thread overview]
Message-ID: <YiFRskA4p1pwNAwS@google.com> (raw)
In-Reply-To: <20220303193842.370645-4-pbonzini@redhat.com>

On Thu, Mar 03, 2022, Paolo Bonzini wrote:
> From: Sean Christopherson <seanjc@google.com>
> 
> Explicitly ignore the result of zap_gfn_range() when putting the last
> reference to a TDP MMU root, and add a pile of comments to formalize the
> TDP MMU's behavior of deferring TLB flushes to alloc/reuse.  Note, this
> only affects the !shared case, as zap_gfn_range() subtly never returns
> true for "flush" as the flush is handled by tdp_mmu_zap_spte_atomic().
> 
> Putting the root without a flush is ok because even if there are stale
> references to the root in the TLB, they are unreachable because KVM will
> not run the guest with the same ASID without first flushing (where ASID
> in this context refers to both SVM's explicit ASID and Intel's implicit
> ASID that is constructed from VPID+PCID+EPT4A+etc...).
> 
> Signed-off-by: Sean Christopherson <seanjc@google.com>
> Message-Id: <20220226001546.360188-5-seanjc@google.com>
> Reviewed-by: Mingwei Zhang <mizhang@google.com>
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> ---
>  arch/x86/kvm/mmu/mmu.c     |  8 ++++++++
>  arch/x86/kvm/mmu/tdp_mmu.c | 10 +++++++++-
>  2 files changed, 17 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
> index 32c041ed65cb..9a6df2d02777 100644
> --- a/arch/x86/kvm/mmu/mmu.c
> +++ b/arch/x86/kvm/mmu/mmu.c
> @@ -5083,6 +5083,14 @@ int kvm_mmu_load(struct kvm_vcpu *vcpu)
>  	kvm_mmu_sync_roots(vcpu);
>  
>  	kvm_mmu_load_pgd(vcpu);
> +
> +	/*
> +	 * Flush any TLB entries for the new root, the provenance of the root
> +	 * is unknown.  Even if KVM ensures there are no stale TLB entries
> +	 * for a freed root, in theory another hypervisor could have left
> +	 * stale entries.  Flushing on alloc also allows KVM to skip the TLB
> +	 * flush when freeing a root (see kvm_tdp_mmu_put_root()).
> +	 */
>  	static_call(kvm_x86_flush_tlb_current)(vcpu);
>  out:
>  	return r;
> diff --git a/arch/x86/kvm/mmu/tdp_mmu.c b/arch/x86/kvm/mmu/tdp_mmu.c
> index b97a4125feac..921fa386df99 100644
> --- a/arch/x86/kvm/mmu/tdp_mmu.c
> +++ b/arch/x86/kvm/mmu/tdp_mmu.c
> @@ -93,7 +93,15 @@ void kvm_tdp_mmu_put_root(struct kvm *kvm, struct kvm_mmu_page *root,
>  	list_del_rcu(&root->link);
>  	spin_unlock(&kvm->arch.tdp_mmu_pages_lock);
>  
> -	zap_gfn_range(kvm, root, 0, -1ull, false, false, shared);
> +	/*
> +	 * A TLB flush is not necessary as KVM performs a local TLB flush when
> +	 * allocating a new root (see kvm_mmu_load()), and when migrating vCPU
> +	 * to a different pCPU.  Note, the local TLB flush on reuse also
> +	 * invalidates any paging-structure-cache entries, i.e. TLB entries for
> +	 * intermediate paging structures, that may be zapped, as such entries
> +	 * are associated with the ASID on both VMX and SVM.
> +	 */
> +	(void)zap_gfn_range(kvm, root, 0, -1ull, false, false, shared);

Discussed offline with Sean. Now I get myself comfortable with the style
of mmu with multiple 'roots' and leaving TLB unflushed for invalidated
roots.

I guess one minor improvement on the comment could be:

"A TLB flush is not necessary as each vCPU performs a local TLB flush
when allocating or assigning a new root (see kvm_mmu_load()), and when
migrating to a different pCPU."

The above could be better since "KVM performs a local TLB flush" makes
readers think why we miss the 'remote' TLB flushes?
>  
>  	call_rcu(&root->rcu_head, tdp_mmu_free_sp_rcu_callback);
>  }
> -- 
> 2.31.1
> 
> 

  reply	other threads:[~2022-03-03 23:39 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-03 19:38 [PATCH v4 00/30] KVM: x86/mmu: Overhaul TDP MMU zapping and flushing Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 01/30] KVM: x86/mmu: Check for present SPTE when clearing dirty bit in TDP MMU Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 02/30] KVM: x86/mmu: Fix wrong/misleading comments in TDP MMU fast zap Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 03/30] KVM: x86/mmu: Formalize TDP MMU's (unintended?) deferred TLB flush logic Paolo Bonzini
2022-03-03 23:39   ` Mingwei Zhang [this message]
2022-03-03 19:38 ` [PATCH v4 04/30] KVM: x86/mmu: Document that zapping invalidated roots doesn't need to flush Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 05/30] KVM: x86/mmu: Require mmu_lock be held for write in unyielding root iter Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 06/30] KVM: x86/mmu: only perform eager page splitting on valid roots Paolo Bonzini
2022-03-03 20:03   ` Sean Christopherson
2022-03-03 19:38 ` [PATCH v4 07/30] KVM: x86/mmu: do not allow readers to acquire references to invalid roots Paolo Bonzini
2022-03-03 20:12   ` Sean Christopherson
2022-03-03 19:38 ` [PATCH v4 08/30] KVM: x86/mmu: Check for !leaf=>leaf, not PFN change, in TDP MMU SP removal Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 09/30] KVM: x86/mmu: Batch TLB flushes from TDP MMU for MMU notifier change_spte Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 10/30] KVM: x86/mmu: Drop RCU after processing each root in MMU notifier hooks Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 11/30] KVM: x86/mmu: Add helpers to read/write TDP MMU SPTEs and document RCU Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 12/30] KVM: x86/mmu: WARN if old _or_ new SPTE is REMOVED in non-atomic path Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 13/30] KVM: x86/mmu: Refactor low-level TDP MMU set SPTE helper to take raw values Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 14/30] KVM: x86/mmu: Zap only the target TDP MMU shadow page in NX recovery Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 15/30] KVM: x86/mmu: Skip remote TLB flush when zapping all of TDP MMU Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 16/30] KVM: x86/mmu: Add dedicated helper to zap TDP MMU root shadow page Paolo Bonzini
2022-03-04  0:07   ` Mingwei Zhang
2022-03-03 19:38 ` [PATCH v4 17/30] KVM: x86/mmu: Require mmu_lock be held for write to zap TDP MMU range Paolo Bonzini
2022-03-04  0:14   ` Mingwei Zhang
2022-03-03 19:38 ` [PATCH v4 18/30] KVM: x86/mmu: Zap only TDP MMU leafs in kvm_zap_gfn_range() Paolo Bonzini
2022-03-04  1:16   ` Mingwei Zhang
2022-03-04 16:11     ` Sean Christopherson
2022-03-04 18:00       ` Mingwei Zhang
2022-03-04 18:42         ` Sean Christopherson
2022-03-11 15:09   ` Vitaly Kuznetsov
2022-03-13 18:40   ` Mingwei Zhang
2022-03-25 15:13     ` Sean Christopherson
2022-03-26 18:10       ` Mingwei Zhang
2022-03-28 15:06         ` Sean Christopherson
2022-03-03 19:38 ` [PATCH v4 19/30] KVM: x86/mmu: Do remote TLB flush before dropping RCU in TDP MMU resched Paolo Bonzini
2022-03-04  1:19   ` Mingwei Zhang
2022-03-03 19:38 ` [PATCH v4 20/30] KVM: x86/mmu: Defer TLB flush to caller when freeing TDP MMU shadow pages Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 21/30] KVM: x86/mmu: Zap invalidated roots via asynchronous worker Paolo Bonzini
2022-03-03 20:54   ` Sean Christopherson
2022-03-03 21:06     ` Sean Christopherson
2022-03-03 21:20   ` Sean Christopherson
2022-03-03 21:32     ` Sean Christopherson
2022-03-04  6:48       ` Paolo Bonzini
2022-03-04 16:02         ` Sean Christopherson
2022-03-04 18:11           ` Paolo Bonzini
2022-03-05  0:34             ` Sean Christopherson
2022-03-05 19:53               ` Paolo Bonzini
2022-03-08 21:29                 ` Sean Christopherson
2022-03-11 17:50                   ` Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 22/30] KVM: x86/mmu: Allow yielding when zapping GFNs for defunct TDP MMU root Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 23/30] KVM: x86/mmu: Zap roots in two passes to avoid inducing RCU stalls Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 24/30] KVM: x86/mmu: Zap defunct roots via asynchronous worker Paolo Bonzini
2022-03-03 22:08   ` Sean Christopherson
2022-03-03 19:38 ` [PATCH v4 25/30] KVM: x86/mmu: Check for a REMOVED leaf SPTE before making the SPTE Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 26/30] KVM: x86/mmu: WARN on any attempt to atomically update REMOVED SPTE Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 27/30] KVM: selftests: Move raw KVM_SET_USER_MEMORY_REGION helper to utils Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 28/30] KVM: selftests: Split out helper to allocate guest mem via memfd Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 29/30] KVM: selftests: Define cpu_relax() helpers for s390 and x86 Paolo Bonzini
2022-03-03 19:38 ` [PATCH v4 30/30] KVM: selftests: Add test to populate a VM with the max possible guest mem Paolo Bonzini
2022-03-08 14:47   ` Paolo Bonzini
2022-03-08 15:36     ` Christian Borntraeger
2022-03-08 21:09     ` Sean Christopherson
2022-03-08 17:25 ` [PATCH v4 00/30] KVM: x86/mmu: Overhaul TDP MMU zapping and flushing Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YiFRskA4p1pwNAwS@google.com \
    --to=mizhang@google.com \
    --cc=bgardon@google.com \
    --cc=david@redhat.com \
    --cc=dmatlack@google.com \
    --cc=jmattson@google.com \
    --cc=joro@8bytes.org \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=seanjc@google.com \
    --cc=vkuznets@redhat.com \
    --cc=wanpengli@tencent.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).