From: Alexander Duyck <email@example.com> To: "Michael S. Tsirkin" <firstname.lastname@example.org> Cc: Alexander Duyck <email@example.com>, firstname.lastname@example.org, email@example.com, firstname.lastname@example.org, email@example.com, firstname.lastname@example.org, email@example.com, firstname.lastname@example.org, email@example.com, firstname.lastname@example.org, email@example.com, firstname.lastname@example.org Subject: Re: [RFC PATCH 3/4] kvm: Add guest side support for free memory hints Date: Mon, 11 Feb 2019 13:00:53 -0800 Message-ID: <email@example.com> (raw) In-Reply-To: <firstname.lastname@example.org> On Mon, 2019-02-11 at 14:54 -0500, Michael S. Tsirkin wrote: > On Mon, Feb 11, 2019 at 10:10:06AM -0800, Alexander Duyck wrote: > > On Mon, 2019-02-11 at 12:36 -0500, Michael S. Tsirkin wrote: > > > On Mon, Feb 11, 2019 at 08:31:34AM -0800, Alexander Duyck wrote: > > > > On Sat, 2019-02-09 at 19:49 -0500, Michael S. Tsirkin wrote: > > > > > On Mon, Feb 04, 2019 at 10:15:52AM -0800, Alexander Duyck wrote: > > > > > > From: Alexander Duyck <email@example.com> > > > > > > > > > > > > Add guest support for providing free memory hints to the KVM hypervisor for > > > > > > freed pages huge TLB size or larger. I am restricting the size to > > > > > > huge TLB order and larger because the hypercalls are too expensive to be > > > > > > performing one per 4K page. > > > > > > > > > > Even 2M pages start to get expensive with a TB guest. > > > > > > > > Agreed. > > > > > > > > > Really it seems we want a virtio ring so we can pass a batch of these. > > > > > E.g. 256 entries, 2M each - that's more like it. > > > > > > > > The only issue I see with doing that is that we then have to defer the > > > > freeing. Doing that is going to introduce issues in the guest as we are > > > > going to have pages going unused for some period of time while we wait > > > > for the hint to complete, and we cannot just pull said pages back. I'm > > > > not really a fan of the asynchronous nature of Nitesh's patches for > > > > this reason. > > > > > > Well nothing prevents us from doing an extra exit to the hypervisor if > > > we want. The asynchronous nature is there as an optimization > > > to allow hypervisor to do its thing on a separate CPU. > > > Why not proceed doing other things meanwhile? > > > And if the reason is that we are short on memory, then > > > maybe we should be less aggressive in hinting? > > > > > > E.g. if we just have 2 pages: > > > > > > hint page 1 > > > page 1 hint processed? > > > yes - proceed to page 2 > > > no - wait for interrupt > > > > > > get interrupt that page 1 hint is processed > > > hint page 2 > > > > > > > > > If hypervisor happens to be running on same CPU it > > > can process things synchronously and we never enter > > > the no branch. > > > > > > > Another concern I would have about processing this asynchronously is > > that we have the potential for multiple guest CPUs to become > > bottlenecked by a single host CPU. I am not sure if that is something > > that would be desirable. > > Well with a hypercall per page the fix is to block VCPU > completely which is also not for everyone. > > If you can't push a free page hint to host, then > ideally you just won't. That's a nice property of > hinting we have upstream right now. > Host too busy - hinting is just skipped. Right, but if you do that then there is a potential to end up missing hints for a large portion of memory. It seems like you would end up with even bigger issues since then at that point you have essentially leaked memory. I would think you would need a way to resync the host and the guest after something like that. Otherwise you can have memory that will just go unused for an extended period if a guest just goes idle. > > > > > > Using the huge TLB order became the obvious > > > > > > choice for the order to use as it allows us to avoid fragmentation of higher > > > > > > order memory on the host. > > > > > > > > > > > > I have limited the functionality so that it doesn't work when page > > > > > > poisoning is enabled. I did this because a write to the page after doing an > > > > > > MADV_DONTNEED would effectively negate the hint, so it would be wasting > > > > > > cycles to do so. > > > > > > > > > > Again that's leaking host implementation detail into guest interface. > > > > > > > > > > We are giving guest page hints to host that makes sense, > > > > > weird interactions with other features due to host > > > > > implementation details should be handled by host. > > > > > > > > I don't view this as a host implementation detail, this is guest > > > > feature making use of all pages for debugging. If we are placing poison > > > > values in the page then I wouldn't consider them an unused page, it is > > > > being actively used to store the poison value. > > > > > > Well I guess it's a valid point of view for a kernel hacker, but they are > > > unused from application's point of view. > > > However poisoning is transparent to users and most distro users > > > are not aware of it going on. They just know that debug kernels > > > are slower. > > > User loading a debug kernel and immediately breaking overcommit > > > is an unpleasant experience. > > > > How would that be any different then a user loading an older kernel > > that doesn't have this feature and breaking overcommit as a result? > > Well old kernel does not have the feature so nothing to debug. > When we have a new feature that goes away in the debug kernel, > that's a big support problem since this leads to heisenbugs. Trying to debug host features from the guest would be a pain anyway as a guest shouldn't even really know what the underlying setup of the guest is supposed to be. > > I still think it would be better if we left the poisoning enabled in > > such a case and just displayed a warning message if nothing else that > > hinting is disabled because of page poisoning. > > > > One other thought I had on this is that one side effect of page > > poisoning is probably that KSM would be able to merge all of the poison > > pages together into a single page since they are all set to the same > > values. So even with the poisoned pages it would be possible to reduce > > total memory overhead. > > Right. And BTW one thing that host can do is pass > the hinted area to KSM for merging. > That requires an alloc hook to free it though. > > Or we could add a per-VMA byte with the poison > value and use that on host to populate pages on fault. > > > > > > If we can achieve this > > > > and free the page back to the host then even better, but until the > > > > features can coexist we should not use the page hinting while page > > > > poisoning is enabled. > > > > > > Existing hinting in balloon allows them to coexist so I think we > > > need to set the bar just as high for any new variant. > > > > That is what I heard. I will have to look into this. > > It's not doing anything smart right now, just checks > that poison == 0 and skips freeing if not. > But it can be enhanced transparently to guests. Okay, so it probably should be extended to add something like poison page that could replace the zero page for reads to a page that has been unmapped. > > > > This is one of the reasons why I was opposed to just disabling page > > > > poisoning when this feature was enabled in Nitesh's patches. If the > > > > guest has page poisoning enabled it is doing something with the page. > > > > It shouldn't be prevented from doing that because the host wants to > > > > have the option to free the pages. > > > > > > I agree but I think the decision belongs on the host. I.e. > > > hint the page but tell the host it needs to be careful > > > about the poison value. It might also mean we > > > need to make sure poisoning happens after the hinting, not before. > > > > The only issue with poisoning after instead of before is that the hint > > is ignored and we end up triggering a page fault and zero as a result. > > It might make more sense to have an architecture specific call that can > > be paravirtualized to handle the case of poisoning the page for us if > > we have the unused page hint enabled. Otherwise the write to the page > > is a given to invalidate the hint. > > Sounds interesting. So the arch hook will first poison and > then pass the page to the host? > > Or we can also ask the host to poison for us, problem is this forces > host to either always write into page, or call MADV_DONTNEED, > without it could do MADV_FREE. Maybe that is not a big issue. I would think we would ask the host to poison for us. If I am not mistaken both solutions right now are using MADV_DONTNEED. I would tend to lean that way if we are doing page poisoning since the cost for zeroing/poisoning the page on the host could be canceled out by dropping the page poisoning on the guest. Then again since we are doing higher order pages only, and the poisoning is supposed to happen before we get into __free_one_page we would probably have to do both the poisoning, and the poison on fault.
next prev parent reply index Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-02-04 18:15 [RFC PATCH 0/4] kvm: Report unused guest pages to host Alexander Duyck 2019-02-04 18:15 ` [RFC PATCH 1/4] madvise: Expose ability to set dontneed from kernel Alexander Duyck 2019-02-04 18:15 ` [RFC PATCH 2/4] kvm: Add host side support for free memory hints Alexander Duyck 2019-02-10 0:44 ` Michael S. Tsirkin 2019-02-11 17:34 ` Alexander Duyck 2019-02-11 17:36 ` Michael S. Tsirkin 2019-02-11 17:41 ` Dave Hansen 2019-02-11 17:48 ` Michael S. Tsirkin 2019-02-11 18:30 ` Alexander Duyck 2019-02-11 19:24 ` Michael S. Tsirkin 2019-02-04 18:15 ` [RFC PATCH 3/4] kvm: Add guest " Alexander Duyck 2019-02-04 19:44 ` Dave Hansen 2019-02-04 20:42 ` Alexander Duyck 2019-02-04 23:00 ` Nadav Amit 2019-02-04 23:37 ` Alexander Duyck 2019-02-05 0:03 ` Nadav Amit 2019-02-05 0:16 ` Alexander Duyck 2019-02-05 1:46 ` Nadav Amit 2019-02-05 18:09 ` Alexander Duyck 2019-02-07 18:21 ` Luiz Capitulino 2019-02-07 18:44 ` Alexander Duyck 2019-02-07 20:02 ` Luiz Capitulino 2019-02-08 21:05 ` Nitesh Narayan Lal 2019-02-08 21:31 ` Alexander Duyck 2019-02-10 0:49 ` Michael S. Tsirkin 2019-02-11 16:31 ` Alexander Duyck 2019-02-11 17:36 ` Michael S. Tsirkin 2019-02-11 18:10 ` Alexander Duyck 2019-02-11 19:54 ` Michael S. Tsirkin 2019-02-11 21:00 ` Alexander Duyck [this message] 2019-02-11 22:52 ` Michael S. Tsirkin [not found] ` <firstname.lastname@example.org> 2019-02-12 0:34 ` Michael S. Tsirkin 2019-02-11 17:48 ` Dave Hansen 2019-02-11 17:58 ` Michael S. Tsirkin 2019-02-11 18:19 ` Dave Hansen 2019-02-11 19:56 ` Michael S. Tsirkin 2019-02-04 18:15 ` [RFC PATCH 4/4] mm: Add merge page notifier Alexander Duyck 2019-02-04 19:40 ` Dave Hansen 2019-02-04 19:51 ` Alexander Duyck 2019-02-10 0:57 ` Michael S. Tsirkin 2019-02-11 13:30 ` Nitesh Narayan Lal 2019-02-11 14:17 ` Michael S. Tsirkin 2019-02-11 16:24 ` Nitesh Narayan Lal 2019-02-11 17:41 ` Michael S. Tsirkin 2019-02-11 18:09 ` Nitesh Narayan Lal 2019-02-11 6:40 ` Aaron Lu 2019-02-11 15:58 ` Alexander Duyck 2019-02-12 2:09 ` Aaron Lu 2019-02-12 17:20 ` Alexander Duyck 2019-02-04 18:19 ` [RFC PATCH QEMU] i386/kvm: Enable paravirtual unused page hint mechanism Alexander Duyck 2019-02-05 17:25 ` [RFC PATCH 0/4] kvm: Report unused guest pages to host Nitesh Narayan Lal 2019-02-05 18:43 ` Alexander Duyck 2019-02-07 14:48 ` Nitesh Narayan Lal 2019-02-07 16:56 ` Alexander Duyck 2019-02-10 0:51 ` Michael S. Tsirkin
Reply instructions: You may reply publically to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
LKML Archive on lore.kernel.org Archives are clonable: git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \ firstname.lastname@example.org public-inbox-index lkml Example config snippet for mirrors Newsgroup available over NNTP: nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel AGPL code for this site: git clone https://public-inbox.org/public-inbox.git