From: Kai Huang <kai.huang@intel.com>
To: Sathyanarayanan Kuppuswamy
<sathyanarayanan.kuppuswamy@linux.intel.com>,
linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: seanjc@google.com, pbonzini@redhat.com, dave.hansen@intel.com,
len.brown@intel.com, tony.luck@intel.com,
rafael.j.wysocki@intel.com, reinette.chatre@intel.com,
dan.j.williams@intel.com, peterz@infradead.org,
ak@linux.intel.com, kirill.shutemov@linux.intel.com,
isaku.yamahata@intel.com
Subject: Re: [PATCH v3 09/21] x86/virt/tdx: Get information about TDX module and convertible memory
Date: Tue, 26 Apr 2022 12:05:23 +1200 [thread overview]
Message-ID: <7887db8b5108b8dc9bd35868db561badca060b51.camel@intel.com> (raw)
In-Reply-To: <8972b2ac-c786-8ff5-74fc-040cd4d81c86@linux.intel.com>
>
> > +}
> > +
> > +static int sanitize_cmrs(struct cmr_info *cmr_array, int cmr_num)
>
> Since this function only deals with tdx_cmr_array, why pass it
> as argument?
I received comments to use cmr_num as argument and pass tdx_cmr_num to
sanitize_cmrs() and finalize it at the end of this function. In this case I
think it's better to pass tdx_cmr_array as argument. It also saves some typing
(tdx_cmr_array vs cmr_array) in sanitize_cmrs().
>
> > +{
> > + int i, j;
> > +
> > + /*
> > + * Intel TDX module spec, 20.7.3 CMR_INFO:
> > + *
> > + * TDH.SYS.INFO leaf function returns a MAX_CMRS (32) entry
> > + * array of CMR_INFO entries. The CMRs are sorted from the
> > + * lowest base address to the highest base address, and they
> > + * are non-overlapping.
> > + *
> > + * This implies that BIOS may generate invalid empty entries
> > + * if total CMRs are less than 32. Skip them manually.
> > + */
> > + for (i = 0; i < cmr_num; i++) {
> > + struct cmr_info *cmr = &cmr_array[i];
> > + struct cmr_info *prev_cmr = NULL;
>
> Why not keep declarations together at the top of the function?
Why? They are only used in this for-loop.
>
> > +
> > + /* Skip further invalid CMRs */
> > + if (!cmr_valid(cmr))
> > + break;
> > +
> > + if (i > 0)
> > + prev_cmr = &cmr_array[i - 1];
> > +
> > + /*
> > + * It is a TDX firmware bug if CMRs are not
> > + * in address ascending order.
> > + */
> > + if (prev_cmr && ((prev_cmr->base + prev_cmr->size) >
> > + cmr->base)) {
> > + pr_err("Firmware bug: CMRs not in address ascending order.\n");
> > + return -EFAULT;
> > + }
>
> Since above condition is only true for i > 0 case, why not combine them
> together if (i > 0) {...}
It will make an additional ident for the above if() {} to check prev_cmr and
cmr. I don't see it is better?
--
Thanks,
-Kai
next prev parent reply other threads:[~2022-04-26 0:05 UTC|newest]
Thread overview: 156+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-06 4:49 [PATCH v3 00/21] TDX host kernel support Kai Huang
2022-04-06 4:49 ` [PATCH v3 01/21] x86/virt/tdx: Detect SEAM Kai Huang
2022-04-18 22:29 ` Sathyanarayanan Kuppuswamy
2022-04-18 22:50 ` Sean Christopherson
2022-04-19 3:38 ` Kai Huang
2022-04-26 20:21 ` Dave Hansen
2022-04-26 23:12 ` Kai Huang
2022-04-26 23:28 ` Dave Hansen
2022-04-26 23:49 ` Kai Huang
2022-04-27 0:22 ` Sean Christopherson
2022-04-27 0:44 ` Kai Huang
2022-04-27 14:22 ` Dave Hansen
2022-04-27 22:39 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 02/21] x86/virt/tdx: Detect TDX private KeyIDs Kai Huang
2022-04-19 5:39 ` Sathyanarayanan Kuppuswamy
2022-04-19 9:41 ` Kai Huang
2022-04-19 5:42 ` Sathyanarayanan Kuppuswamy
2022-04-19 10:07 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 03/21] x86/virt/tdx: Implement the SEAMCALL base function Kai Huang
2022-04-19 14:07 ` Sathyanarayanan Kuppuswamy
2022-04-20 4:16 ` Kai Huang
2022-04-20 7:29 ` Sathyanarayanan Kuppuswamy
2022-04-20 10:39 ` Kai Huang
2022-04-26 20:37 ` Dave Hansen
2022-04-26 23:29 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 04/21] x86/virt/tdx: Add skeleton for detecting and initializing TDX on demand Kai Huang
2022-04-19 14:53 ` Sathyanarayanan Kuppuswamy
2022-04-20 4:37 ` Kai Huang
2022-04-20 5:21 ` Dave Hansen
2022-04-20 14:30 ` Sathyanarayanan Kuppuswamy
2022-04-20 22:35 ` Kai Huang
2022-04-26 20:53 ` Dave Hansen
2022-04-27 0:43 ` Kai Huang
2022-04-27 14:49 ` Dave Hansen
2022-04-28 0:00 ` Kai Huang
2022-04-28 14:27 ` Dave Hansen
2022-04-28 23:44 ` Kai Huang
2022-04-28 23:53 ` Dave Hansen
2022-04-29 0:11 ` Kai Huang
2022-04-29 0:26 ` Dave Hansen
2022-04-29 0:59 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 05/21] x86/virt/tdx: Detect P-SEAMLDR and TDX module Kai Huang
2022-04-26 20:56 ` Dave Hansen
2022-04-27 0:01 ` Kai Huang
2022-04-27 14:24 ` Dave Hansen
2022-04-27 21:30 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 06/21] x86/virt/tdx: Shut down TDX module in case of error Kai Huang
2022-04-23 15:39 ` Sathyanarayanan Kuppuswamy
2022-04-25 23:41 ` Kai Huang
2022-04-26 1:48 ` Sathyanarayanan Kuppuswamy
2022-04-26 2:12 ` Kai Huang
2022-04-26 20:59 ` Dave Hansen
2022-04-27 0:06 ` Kai Huang
2022-05-18 16:19 ` Sagi Shahar
2022-05-18 23:51 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 07/21] x86/virt/tdx: Do TDX module global initialization Kai Huang
2022-04-20 22:27 ` Sathyanarayanan Kuppuswamy
2022-04-20 22:37 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 08/21] x86/virt/tdx: Do logical-cpu scope TDX module initialization Kai Huang
2022-04-24 1:27 ` Sathyanarayanan Kuppuswamy
2022-04-25 23:55 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 09/21] x86/virt/tdx: Get information about TDX module and convertible memory Kai Huang
2022-04-25 2:58 ` Sathyanarayanan Kuppuswamy
2022-04-26 0:05 ` Kai Huang [this message]
2022-04-27 22:15 ` Dave Hansen
2022-04-28 0:15 ` Kai Huang
2022-04-28 14:06 ` Dave Hansen
2022-04-28 23:14 ` Kai Huang
2022-04-29 17:47 ` Dave Hansen
2022-05-02 5:04 ` Kai Huang
2022-05-25 4:47 ` Kai Huang
2022-05-25 4:57 ` Kai Huang
2022-05-25 16:00 ` Kai Huang
2022-05-18 22:30 ` Sagi Shahar
2022-05-18 23:56 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 10/21] x86/virt/tdx: Add placeholder to coveret all system RAM as TDX memory Kai Huang
2022-04-20 20:48 ` Isaku Yamahata
2022-04-20 22:38 ` Kai Huang
2022-04-27 22:24 ` Dave Hansen
2022-04-28 0:53 ` Kai Huang
2022-04-28 1:07 ` Dave Hansen
2022-04-28 1:35 ` Kai Huang
2022-04-28 3:40 ` Dave Hansen
2022-04-28 3:55 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 11/21] x86/virt/tdx: Choose to use " Kai Huang
2022-04-20 20:55 ` Isaku Yamahata
2022-04-20 22:39 ` Kai Huang
2022-04-28 15:54 ` Dave Hansen
2022-04-29 7:32 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 12/21] x86/virt/tdx: Create TDMRs to cover all system RAM Kai Huang
2022-04-28 16:22 ` Dave Hansen
2022-04-29 7:24 ` Kai Huang
2022-04-29 13:52 ` Dave Hansen
2022-04-06 4:49 ` [PATCH v3 13/21] x86/virt/tdx: Allocate and set up PAMTs for TDMRs Kai Huang
2022-04-28 17:12 ` Dave Hansen
2022-04-29 7:46 ` Kai Huang
2022-04-29 14:20 ` Dave Hansen
2022-04-29 14:30 ` Sean Christopherson
2022-04-29 17:46 ` Dave Hansen
2022-04-29 18:19 ` Sean Christopherson
2022-04-29 18:32 ` Dave Hansen
2022-05-02 5:59 ` Kai Huang
2022-05-02 14:17 ` Dave Hansen
2022-05-02 21:55 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 14/21] x86/virt/tdx: Set up reserved areas for all TDMRs Kai Huang
2022-04-06 4:49 ` [PATCH v3 15/21] x86/virt/tdx: Reserve TDX module global KeyID Kai Huang
2022-04-06 4:49 ` [PATCH v3 16/21] x86/virt/tdx: Configure TDX module with TDMRs and " Kai Huang
2022-04-06 4:49 ` [PATCH v3 17/21] x86/virt/tdx: Configure global KeyID on all packages Kai Huang
2022-04-06 4:49 ` [PATCH v3 18/21] x86/virt/tdx: Initialize all TDMRs Kai Huang
2022-04-06 4:49 ` [PATCH v3 19/21] x86: Flush cache of TDX private memory during kexec() Kai Huang
2022-04-06 4:49 ` [PATCH v3 20/21] x86/virt/tdx: Add kernel command line to opt-in TDX host support Kai Huang
2022-04-28 17:25 ` Dave Hansen
2022-04-06 4:49 ` [PATCH v3 21/21] Documentation/x86: Add documentation for " Kai Huang
2022-04-14 10:19 ` [PATCH v3 00/21] TDX host kernel support Kai Huang
2022-04-26 20:13 ` Dave Hansen
2022-04-27 1:15 ` Kai Huang
2022-04-27 21:59 ` Dave Hansen
2022-04-28 0:37 ` Kai Huang
2022-04-28 0:50 ` Dave Hansen
2022-04-28 0:58 ` Kai Huang
2022-04-29 1:40 ` Kai Huang
2022-04-29 3:04 ` Dan Williams
2022-04-29 5:35 ` Kai Huang
2022-05-03 23:59 ` Kai Huang
2022-05-04 0:25 ` Dave Hansen
2022-05-04 1:15 ` Kai Huang
2022-05-05 9:54 ` Kai Huang
2022-05-05 13:51 ` Dan Williams
2022-05-05 22:14 ` Kai Huang
2022-05-06 0:22 ` Dan Williams
2022-05-06 0:45 ` Kai Huang
2022-05-06 1:15 ` Dan Williams
2022-05-06 1:46 ` Kai Huang
2022-05-06 15:57 ` Dan Williams
2022-05-09 2:46 ` Kai Huang
2022-05-10 10:25 ` Kai Huang
2022-05-07 0:09 ` Mike Rapoport
2022-05-08 10:00 ` Kai Huang
2022-05-09 10:33 ` Mike Rapoport
2022-05-09 23:27 ` Kai Huang
2022-05-04 14:31 ` Dan Williams
2022-05-04 22:50 ` Kai Huang
2022-04-28 1:01 ` Dan Williams
2022-04-28 1:21 ` Kai Huang
2022-04-29 2:58 ` Dan Williams
2022-04-29 5:43 ` Kai Huang
2022-04-29 14:39 ` Dave Hansen
2022-04-29 15:18 ` Dan Williams
2022-04-29 17:18 ` Dave Hansen
2022-04-29 17:48 ` Dan Williams
2022-04-29 18:34 ` Dave Hansen
2022-04-29 18:47 ` Dan Williams
2022-04-29 19:20 ` Dave Hansen
2022-04-29 21:20 ` Dan Williams
2022-04-29 21:27 ` Dave Hansen
2022-05-02 10:18 ` Kai Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7887db8b5108b8dc9bd35868db561badca060b51.camel@intel.com \
--to=kai.huang@intel.com \
--cc=ak@linux.intel.com \
--cc=dan.j.williams@intel.com \
--cc=dave.hansen@intel.com \
--cc=isaku.yamahata@intel.com \
--cc=kirill.shutemov@linux.intel.com \
--cc=kvm@vger.kernel.org \
--cc=len.brown@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=peterz@infradead.org \
--cc=rafael.j.wysocki@intel.com \
--cc=reinette.chatre@intel.com \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
--cc=seanjc@google.com \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).