From: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com>
To: Kai Huang <kai.huang@intel.com>,
linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: seanjc@google.com, pbonzini@redhat.com, dave.hansen@intel.com,
len.brown@intel.com, tony.luck@intel.com,
rafael.j.wysocki@intel.com, reinette.chatre@intel.com,
dan.j.williams@intel.com, peterz@infradead.org,
ak@linux.intel.com, kirill.shutemov@linux.intel.com,
isaku.yamahata@intel.com
Subject: Re: [PATCH v3 01/21] x86/virt/tdx: Detect SEAM
Date: Mon, 18 Apr 2022 15:29:36 -0700 [thread overview]
Message-ID: <8e2269a7-3e71-5030-8d04-1e8e3fc4323f@linux.intel.com> (raw)
In-Reply-To: <ab118fb9bd39b200feb843660a9b10421943aa70.1649219184.git.kai.huang@intel.com>
On 4/5/22 9:49 PM, Kai Huang wrote:
> +/* BIOS must configure SEAMRR registers for all cores consistently */
> +static u64 seamrr_base, seamrr_mask;
> +
> +static bool __seamrr_enabled(void)
> +{
> + return (seamrr_mask & SEAMRR_ENABLED_BITS) == SEAMRR_ENABLED_BITS;
> +}
> +
> +static void detect_seam_bsp(struct cpuinfo_x86 *c)
> +{
> + u64 mtrrcap, base, mask;
> +
> + /* SEAMRR is reported via MTRRcap */
> + if (!boot_cpu_has(X86_FEATURE_MTRR))
> + return;
> +
> + rdmsrl(MSR_MTRRcap, mtrrcap);
> + if (!(mtrrcap & MTRR_CAP_SEAMRR))
> + return;
> +
> + rdmsrl(MSR_IA32_SEAMRR_PHYS_BASE, base);
> + if (!(base & SEAMRR_PHYS_BASE_CONFIGURED)) {
> + pr_info("SEAMRR base is not configured by BIOS\n");
> + return;
> + }
> +
> + rdmsrl(MSR_IA32_SEAMRR_PHYS_MASK, mask);
> + if ((mask & SEAMRR_ENABLED_BITS) != SEAMRR_ENABLED_BITS) {
> + pr_info("SEAMRR is not enabled by BIOS\n");
> + return;
> + }
> +
> + seamrr_base = base;
> + seamrr_mask = mask;
> +}
> +
> +static void detect_seam_ap(struct cpuinfo_x86 *c)
> +{
> + u64 base, mask;
> +
> + /*
> + * Don't bother to detect this AP if SEAMRR is not
> + * enabled after earlier detections.
> + */
> + if (!__seamrr_enabled())
> + return;
> +
> + rdmsrl(MSR_IA32_SEAMRR_PHYS_BASE, base);
> + rdmsrl(MSR_IA32_SEAMRR_PHYS_MASK, mask);
> +
> + if (base == seamrr_base && mask == seamrr_mask)
> + return;
> +
> + pr_err("Inconsistent SEAMRR configuration by BIOS\n");
Do we need to panic for SEAM config issue (for security)?
> + /* Mark SEAMRR as disabled. */
> + seamrr_base = 0;
> + seamrr_mask = 0
> +}
> +
> +static void detect_seam(struct cpuinfo_x86 *c)
> +{
why not do this check directly in tdx_detect_cpu()?
> + if (c == &boot_cpu_data)
> + detect_seam_bsp(c);
> + else
> + detect_seam_ap(c);
> +}
> +
> +void tdx_detect_cpu(struct cpuinfo_x86 *c)
> +{
> + detect_seam(c);
> +}
--
Sathyanarayanan Kuppuswamy
Linux Kernel Developer
next prev parent reply other threads:[~2022-04-18 22:29 UTC|newest]
Thread overview: 156+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-06 4:49 [PATCH v3 00/21] TDX host kernel support Kai Huang
2022-04-06 4:49 ` [PATCH v3 01/21] x86/virt/tdx: Detect SEAM Kai Huang
2022-04-18 22:29 ` Sathyanarayanan Kuppuswamy [this message]
2022-04-18 22:50 ` Sean Christopherson
2022-04-19 3:38 ` Kai Huang
2022-04-26 20:21 ` Dave Hansen
2022-04-26 23:12 ` Kai Huang
2022-04-26 23:28 ` Dave Hansen
2022-04-26 23:49 ` Kai Huang
2022-04-27 0:22 ` Sean Christopherson
2022-04-27 0:44 ` Kai Huang
2022-04-27 14:22 ` Dave Hansen
2022-04-27 22:39 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 02/21] x86/virt/tdx: Detect TDX private KeyIDs Kai Huang
2022-04-19 5:39 ` Sathyanarayanan Kuppuswamy
2022-04-19 9:41 ` Kai Huang
2022-04-19 5:42 ` Sathyanarayanan Kuppuswamy
2022-04-19 10:07 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 03/21] x86/virt/tdx: Implement the SEAMCALL base function Kai Huang
2022-04-19 14:07 ` Sathyanarayanan Kuppuswamy
2022-04-20 4:16 ` Kai Huang
2022-04-20 7:29 ` Sathyanarayanan Kuppuswamy
2022-04-20 10:39 ` Kai Huang
2022-04-26 20:37 ` Dave Hansen
2022-04-26 23:29 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 04/21] x86/virt/tdx: Add skeleton for detecting and initializing TDX on demand Kai Huang
2022-04-19 14:53 ` Sathyanarayanan Kuppuswamy
2022-04-20 4:37 ` Kai Huang
2022-04-20 5:21 ` Dave Hansen
2022-04-20 14:30 ` Sathyanarayanan Kuppuswamy
2022-04-20 22:35 ` Kai Huang
2022-04-26 20:53 ` Dave Hansen
2022-04-27 0:43 ` Kai Huang
2022-04-27 14:49 ` Dave Hansen
2022-04-28 0:00 ` Kai Huang
2022-04-28 14:27 ` Dave Hansen
2022-04-28 23:44 ` Kai Huang
2022-04-28 23:53 ` Dave Hansen
2022-04-29 0:11 ` Kai Huang
2022-04-29 0:26 ` Dave Hansen
2022-04-29 0:59 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 05/21] x86/virt/tdx: Detect P-SEAMLDR and TDX module Kai Huang
2022-04-26 20:56 ` Dave Hansen
2022-04-27 0:01 ` Kai Huang
2022-04-27 14:24 ` Dave Hansen
2022-04-27 21:30 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 06/21] x86/virt/tdx: Shut down TDX module in case of error Kai Huang
2022-04-23 15:39 ` Sathyanarayanan Kuppuswamy
2022-04-25 23:41 ` Kai Huang
2022-04-26 1:48 ` Sathyanarayanan Kuppuswamy
2022-04-26 2:12 ` Kai Huang
2022-04-26 20:59 ` Dave Hansen
2022-04-27 0:06 ` Kai Huang
2022-05-18 16:19 ` Sagi Shahar
2022-05-18 23:51 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 07/21] x86/virt/tdx: Do TDX module global initialization Kai Huang
2022-04-20 22:27 ` Sathyanarayanan Kuppuswamy
2022-04-20 22:37 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 08/21] x86/virt/tdx: Do logical-cpu scope TDX module initialization Kai Huang
2022-04-24 1:27 ` Sathyanarayanan Kuppuswamy
2022-04-25 23:55 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 09/21] x86/virt/tdx: Get information about TDX module and convertible memory Kai Huang
2022-04-25 2:58 ` Sathyanarayanan Kuppuswamy
2022-04-26 0:05 ` Kai Huang
2022-04-27 22:15 ` Dave Hansen
2022-04-28 0:15 ` Kai Huang
2022-04-28 14:06 ` Dave Hansen
2022-04-28 23:14 ` Kai Huang
2022-04-29 17:47 ` Dave Hansen
2022-05-02 5:04 ` Kai Huang
2022-05-25 4:47 ` Kai Huang
2022-05-25 4:57 ` Kai Huang
2022-05-25 16:00 ` Kai Huang
2022-05-18 22:30 ` Sagi Shahar
2022-05-18 23:56 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 10/21] x86/virt/tdx: Add placeholder to coveret all system RAM as TDX memory Kai Huang
2022-04-20 20:48 ` Isaku Yamahata
2022-04-20 22:38 ` Kai Huang
2022-04-27 22:24 ` Dave Hansen
2022-04-28 0:53 ` Kai Huang
2022-04-28 1:07 ` Dave Hansen
2022-04-28 1:35 ` Kai Huang
2022-04-28 3:40 ` Dave Hansen
2022-04-28 3:55 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 11/21] x86/virt/tdx: Choose to use " Kai Huang
2022-04-20 20:55 ` Isaku Yamahata
2022-04-20 22:39 ` Kai Huang
2022-04-28 15:54 ` Dave Hansen
2022-04-29 7:32 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 12/21] x86/virt/tdx: Create TDMRs to cover all system RAM Kai Huang
2022-04-28 16:22 ` Dave Hansen
2022-04-29 7:24 ` Kai Huang
2022-04-29 13:52 ` Dave Hansen
2022-04-06 4:49 ` [PATCH v3 13/21] x86/virt/tdx: Allocate and set up PAMTs for TDMRs Kai Huang
2022-04-28 17:12 ` Dave Hansen
2022-04-29 7:46 ` Kai Huang
2022-04-29 14:20 ` Dave Hansen
2022-04-29 14:30 ` Sean Christopherson
2022-04-29 17:46 ` Dave Hansen
2022-04-29 18:19 ` Sean Christopherson
2022-04-29 18:32 ` Dave Hansen
2022-05-02 5:59 ` Kai Huang
2022-05-02 14:17 ` Dave Hansen
2022-05-02 21:55 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 14/21] x86/virt/tdx: Set up reserved areas for all TDMRs Kai Huang
2022-04-06 4:49 ` [PATCH v3 15/21] x86/virt/tdx: Reserve TDX module global KeyID Kai Huang
2022-04-06 4:49 ` [PATCH v3 16/21] x86/virt/tdx: Configure TDX module with TDMRs and " Kai Huang
2022-04-06 4:49 ` [PATCH v3 17/21] x86/virt/tdx: Configure global KeyID on all packages Kai Huang
2022-04-06 4:49 ` [PATCH v3 18/21] x86/virt/tdx: Initialize all TDMRs Kai Huang
2022-04-06 4:49 ` [PATCH v3 19/21] x86: Flush cache of TDX private memory during kexec() Kai Huang
2022-04-06 4:49 ` [PATCH v3 20/21] x86/virt/tdx: Add kernel command line to opt-in TDX host support Kai Huang
2022-04-28 17:25 ` Dave Hansen
2022-04-06 4:49 ` [PATCH v3 21/21] Documentation/x86: Add documentation for " Kai Huang
2022-04-14 10:19 ` [PATCH v3 00/21] TDX host kernel support Kai Huang
2022-04-26 20:13 ` Dave Hansen
2022-04-27 1:15 ` Kai Huang
2022-04-27 21:59 ` Dave Hansen
2022-04-28 0:37 ` Kai Huang
2022-04-28 0:50 ` Dave Hansen
2022-04-28 0:58 ` Kai Huang
2022-04-29 1:40 ` Kai Huang
2022-04-29 3:04 ` Dan Williams
2022-04-29 5:35 ` Kai Huang
2022-05-03 23:59 ` Kai Huang
2022-05-04 0:25 ` Dave Hansen
2022-05-04 1:15 ` Kai Huang
2022-05-05 9:54 ` Kai Huang
2022-05-05 13:51 ` Dan Williams
2022-05-05 22:14 ` Kai Huang
2022-05-06 0:22 ` Dan Williams
2022-05-06 0:45 ` Kai Huang
2022-05-06 1:15 ` Dan Williams
2022-05-06 1:46 ` Kai Huang
2022-05-06 15:57 ` Dan Williams
2022-05-09 2:46 ` Kai Huang
2022-05-10 10:25 ` Kai Huang
2022-05-07 0:09 ` Mike Rapoport
2022-05-08 10:00 ` Kai Huang
2022-05-09 10:33 ` Mike Rapoport
2022-05-09 23:27 ` Kai Huang
2022-05-04 14:31 ` Dan Williams
2022-05-04 22:50 ` Kai Huang
2022-04-28 1:01 ` Dan Williams
2022-04-28 1:21 ` Kai Huang
2022-04-29 2:58 ` Dan Williams
2022-04-29 5:43 ` Kai Huang
2022-04-29 14:39 ` Dave Hansen
2022-04-29 15:18 ` Dan Williams
2022-04-29 17:18 ` Dave Hansen
2022-04-29 17:48 ` Dan Williams
2022-04-29 18:34 ` Dave Hansen
2022-04-29 18:47 ` Dan Williams
2022-04-29 19:20 ` Dave Hansen
2022-04-29 21:20 ` Dan Williams
2022-04-29 21:27 ` Dave Hansen
2022-05-02 10:18 ` Kai Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8e2269a7-3e71-5030-8d04-1e8e3fc4323f@linux.intel.com \
--to=sathyanarayanan.kuppuswamy@linux.intel.com \
--cc=ak@linux.intel.com \
--cc=dan.j.williams@intel.com \
--cc=dave.hansen@intel.com \
--cc=isaku.yamahata@intel.com \
--cc=kai.huang@intel.com \
--cc=kirill.shutemov@linux.intel.com \
--cc=kvm@vger.kernel.org \
--cc=len.brown@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=peterz@infradead.org \
--cc=rafael.j.wysocki@intel.com \
--cc=reinette.chatre@intel.com \
--cc=seanjc@google.com \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).