[PATCH net-next v4 00/10] net: dsa: mv88e6xxx: support for mv88e6250

[PATCH net-next v4 00/10] net: dsa: mv88e6xxx: support for mv88e6250

[Rasmus Villemoes]

This adds support for the mv88e6250 chip. Initially based on the
mv88e6240, this time around, I've been through each ->ops callback and
checked that it makes sense, either replacing with a 6250 specific
variant or dropping it if no equivalent functionality seems to exist
for the 6250. Along the way, I found a few oddities in the existing
code, mostly sent as separate patches/questions.

The one relevant to the 6250 is the ieee_pri_map callback, where the
existing mv88e6085_g1_ieee_pri_map() is actually wrong for many of the
existing users. I've put the mv88e6250_g1_ieee_pri_map() patch first
in case some of the existing chips get switched over to use that and
it is deemed important enough for -stable.

v4:
- fix style issue in 1/10
- add Andrew's reviewed-by to 1,6,7,8,9,10.

v3:
- rebase on top of net-next/master
- add reviewed-bys to patches unchanged from v2 (2,3,4,5)
- add 6250-specific ->ieee_pri_map, ->port_set_speed, ->port_link_state (1,6,7)
- in addition, use mv88e6065_phylink_validate for ->phylink_validate,
  and don't implement ->port_get_cmode, ->port_set_jumbo_size,
  ->port_disable_learn_limit, ->rmu_disable
- drop ptp support
- add patch adding the compatible string to the DT binding (9)
- add small refactoring patch (10)

v2:
- rebase on top of net-next/master
- add reviewed-by to two patches unchanged from v1 (2,3)
- add separate watchdog_ops

Rasmus Villemoes (10):
  net: dsa: mv88e6xxx: add mv88e6250_g1_ieee_pri_map
  net: dsa: mv88e6xxx: introduce support for two chips using direct smi
    addressing
  net: dsa: mv88e6xxx: prepare mv88e6xxx_g1_atu_op() for the mv88e6250
  net: dsa: mv88e6xxx: implement vtu_getnext and vtu_loadpurge for
    mv88e6250
  net: dsa: mv88e6xxx: implement watchdog_ops for mv88e6250
  net: dsa: mv88e6xxx: implement port_set_speed for mv88e6250
  net: dsa: mv88e6xxx: implement port_link_state for mv88e6250
  net: dsa: mv88e6xxx: add support for mv88e6250
  dt-bindings: net: dsa: marvell: add "marvell,mv88e6250" compatible
    string
  net: dsa: mv88e6xxx: refactor mv88e6352_g1_reset

 .../devicetree/bindings/net/dsa/marvell.txt   |  7 +-
 drivers/net/dsa/mv88e6xxx/chip.c              | 81 +++++++++++++++++++
 drivers/net/dsa/mv88e6xxx/chip.h              |  8 ++
 drivers/net/dsa/mv88e6xxx/global1.c           | 17 +++-
 drivers/net/dsa/mv88e6xxx/global1.h           |  7 ++
 drivers/net/dsa/mv88e6xxx/global1_atu.c       |  5 +-
 drivers/net/dsa/mv88e6xxx/global1_vtu.c       | 58 +++++++++++++
 drivers/net/dsa/mv88e6xxx/global2.c           | 26 ++++++
 drivers/net/dsa/mv88e6xxx/global2.h           | 14 ++++
 drivers/net/dsa/mv88e6xxx/port.c              | 77 ++++++++++++++++++
 drivers/net/dsa/mv88e6xxx/port.h              | 14 ++++
 drivers/net/dsa/mv88e6xxx/smi.c               | 25 +++++-
 12 files changed, 333 insertions(+), 6 deletions(-)

-- 
2.20.1

[PATCH net-next v4 01/10] net: dsa: mv88e6xxx: add mv88e6250_g1_ieee_pri_map

[Rasmus Villemoes]

Quite a few of the existing supported chips that use
mv88e6085_g1_ieee_pri_map as ->ieee_pri_map (including, incidentally,
mv88e6085 itself) actually have a reset value of 0xfa50 in the
G1_IEEE_PRI register.

The data sheet for the mv88e6095, however, does describe a reset value
of 0xfa41.

So rather than changing the value in the existing callback, introduce
a new variant with the 0xfa50 value. That will be used by the upcoming
mv88e6250, and existing chips can be switched over one by one,
preferably double-checking both the data sheet and actual hardware in
each case - if anybody actually feels this is important enough to
care.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
 drivers/net/dsa/mv88e6xxx/global1.c | 6 ++++++
 drivers/net/dsa/mv88e6xxx/global1.h | 2 ++
 2 files changed, 8 insertions(+)

diff --git a/drivers/net/dsa/mv88e6xxx/global1.c b/drivers/net/dsa/mv88e6xxx/global1.c
index 770c03406033..c851b7b532a4 100644
--- a/drivers/net/dsa/mv88e6xxx/global1.c
+++ b/drivers/net/dsa/mv88e6xxx/global1.c
@@ -299,6 +299,12 @@ int mv88e6085_g1_ieee_pri_map(struct mv88e6xxx_chip *chip)
 	return mv88e6xxx_g1_write(chip, MV88E6XXX_G1_IEEE_PRI, 0xfa41);
 }
 
+int mv88e6250_g1_ieee_pri_map(struct mv88e6xxx_chip *chip)
+{
+	/* Reset the IEEE Tag priorities to defaults */
+	return mv88e6xxx_g1_write(chip, MV88E6XXX_G1_IEEE_PRI, 0xfa50);
+}
+
 /* Offset 0x1a: Monitor Control */
 /* Offset 0x1a: Monitor & MGMT Control on some devices */
 
diff --git a/drivers/net/dsa/mv88e6xxx/global1.h b/drivers/net/dsa/mv88e6xxx/global1.h
index bb92a130cbef..6d1d1262fe41 100644
--- a/drivers/net/dsa/mv88e6xxx/global1.h
+++ b/drivers/net/dsa/mv88e6xxx/global1.h
@@ -277,7 +277,9 @@ int mv88e6390_g1_set_cpu_port(struct mv88e6xxx_chip *chip, int port);
 int mv88e6390_g1_mgmt_rsvd2cpu(struct mv88e6xxx_chip *chip);
 
 int mv88e6085_g1_ip_pri_map(struct mv88e6xxx_chip *chip);
+
 int mv88e6085_g1_ieee_pri_map(struct mv88e6xxx_chip *chip);
+int mv88e6250_g1_ieee_pri_map(struct mv88e6xxx_chip *chip);
 
 int mv88e6185_g1_set_cascade_port(struct mv88e6xxx_chip *chip, int port);
 
-- 
2.20.1

[PATCH net-next v4 02/10] net: dsa: mv88e6xxx: introduce support for two chips using direct smi addressing

[Rasmus Villemoes]

The 88e6250 (as well as 6220, 6071, 6070, 6020) do not support
multi-chip (indirect) addressing. However, one can still have two of
them on the same mdio bus, since the device only uses 16 of the 32
possible addresses, either addresses 0x00-0x0F or 0x10-0x1F depending
on the ADDR4 pin at reset [since ADDR4 is internally pulled high, the
latter is the default].

In order to prepare for supporting the 88e6250 and friends, introduce
mv88e6xxx_info::dual_chip to allow having a non-zero sw_addr while
still using direct addressing.

Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
 drivers/net/dsa/mv88e6xxx/chip.h |  6 ++++++
 drivers/net/dsa/mv88e6xxx/smi.c  | 25 ++++++++++++++++++++++++-
 2 files changed, 30 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h
index faa3fa889f19..74777c3bc313 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.h
+++ b/drivers/net/dsa/mv88e6xxx/chip.h
@@ -112,6 +112,12 @@ struct mv88e6xxx_info {
 	 * when it is non-zero, and use indirect access to internal registers.
 	 */
 	bool multi_chip;
+	/* Dual-chip Addressing Mode
+	 * Some chips respond to only half of the 32 SMI addresses,
+	 * allowing two to coexist on the same SMI interface.
+	 */
+	bool dual_chip;
+
 	enum dsa_tag_protocol tag_protocol;
 
 	/* Mask for FromPort and ToPort value of PortVec used in ATU Move
diff --git a/drivers/net/dsa/mv88e6xxx/smi.c b/drivers/net/dsa/mv88e6xxx/smi.c
index 96f7d2685bdc..775f8d55a962 100644
--- a/drivers/net/dsa/mv88e6xxx/smi.c
+++ b/drivers/net/dsa/mv88e6xxx/smi.c
@@ -24,6 +24,10 @@
  * When ADDR is non-zero, the chip uses Multi-chip Addressing Mode, allowing
  * multiple devices to share the SMI interface. In this mode it responds to only
  * 2 registers, used to indirectly access the internal SMI devices.
+ *
+ * Some chips use a different scheme: Only the ADDR4 pin is used for
+ * configuration, and the device responds to 16 of the 32 SMI
+ * addresses, allowing two to coexist on the same SMI interface.
  */
 
 static int mv88e6xxx_smi_direct_read(struct mv88e6xxx_chip *chip,
@@ -76,6 +80,23 @@ static const struct mv88e6xxx_bus_ops mv88e6xxx_smi_direct_ops = {
 	.write = mv88e6xxx_smi_direct_write,
 };
 
+static int mv88e6xxx_smi_dual_direct_read(struct mv88e6xxx_chip *chip,
+					  int dev, int reg, u16 *data)
+{
+	return mv88e6xxx_smi_direct_read(chip, chip->sw_addr + dev, reg, data);
+}
+
+static int mv88e6xxx_smi_dual_direct_write(struct mv88e6xxx_chip *chip,
+					   int dev, int reg, u16 data)
+{
+	return mv88e6xxx_smi_direct_write(chip, chip->sw_addr + dev, reg, data);
+}
+
+static const struct mv88e6xxx_bus_ops mv88e6xxx_smi_dual_direct_ops = {
+	.read = mv88e6xxx_smi_dual_direct_read,
+	.write = mv88e6xxx_smi_dual_direct_write,
+};
+
 /* Offset 0x00: SMI Command Register
  * Offset 0x01: SMI Data Register
  */
@@ -144,7 +165,9 @@ static const struct mv88e6xxx_bus_ops mv88e6xxx_smi_indirect_ops = {
 int mv88e6xxx_smi_init(struct mv88e6xxx_chip *chip,
 		       struct mii_bus *bus, int sw_addr)
 {
-	if (sw_addr == 0)
+	if (chip->info->dual_chip)
+		chip->smi_ops = &mv88e6xxx_smi_dual_direct_ops;
+	else if (sw_addr == 0)
 		chip->smi_ops = &mv88e6xxx_smi_direct_ops;
 	else if (chip->info->multi_chip)
 		chip->smi_ops = &mv88e6xxx_smi_indirect_ops;
-- 
2.20.1

[PATCH net-next v4 03/10] net: dsa: mv88e6xxx: prepare mv88e6xxx_g1_atu_op() for the mv88e6250

[Rasmus Villemoes]

All the currently supported chips have .num_databases either 256 or
4096, so this patch does not change behaviour for any of those. The
mv88e6250, however, has .num_databases == 64, and it does not put the
upper two bits in ATU control 13:12, but rather in ATU Operation
9:8. So change the logic to prepare for supporting mv88e6250.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
 drivers/net/dsa/mv88e6xxx/global1_atu.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/mv88e6xxx/global1_atu.c b/drivers/net/dsa/mv88e6xxx/global1_atu.c
index ea243840ee0f..1ae680bc0eff 100644
--- a/drivers/net/dsa/mv88e6xxx/global1_atu.c
+++ b/drivers/net/dsa/mv88e6xxx/global1_atu.c
@@ -94,7 +94,7 @@ static int mv88e6xxx_g1_atu_op(struct mv88e6xxx_chip *chip, u16 fid, u16 op)
 		if (err)
 			return err;
 	} else {
-		if (mv88e6xxx_num_databases(chip) > 16) {
+		if (mv88e6xxx_num_databases(chip) > 64) {
 			/* ATU DBNum[7:4] are located in ATU Control 15:12 */
 			err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_ATU_CTL,
 						&val);
@@ -106,6 +106,9 @@ static int mv88e6xxx_g1_atu_op(struct mv88e6xxx_chip *chip, u16 fid, u16 op)
 						 val);
 			if (err)
 				return err;
+		} else if (mv88e6xxx_num_databases(chip) > 16) {
+			/* ATU DBNum[5:4] are located in ATU Operation 9:8 */
+			op |= (fid & 0x30) << 4;
 		}
 
 		/* ATU DBNum[3:0] are located in ATU Operation 3:0 */
-- 
2.20.1

[PATCH net-next v4 04/10] net: dsa: mv88e6xxx: implement vtu_getnext and vtu_loadpurge for mv88e6250

[Rasmus Villemoes]

These are almost identical to the 6185 variants, but have fewer bits
for the FID.

Bit 10 of the VTU_OP register (offset 0x05) is the VidPolicy bit,
which one should probably preserve in mv88e6xxx_g1_vtu_op(), instead
of always writing a 0. However, on the 6352 family, that bit is
located at bit 12 in the VTU FID register (offset 0x02), and is always
unconditionally cleared by the mv88e6xxx_g1_vtu_fid_write()
function.

Since nothing in the existing driver seems to know or care about that
bit, it seems reasonable to not add the boilerplate to preserve it for
the 6250 (which would require adding a chip-specific vtu_op function,
or adding chip-quirks to the existing one).

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
 drivers/net/dsa/mv88e6xxx/global1.h     |  4 ++
 drivers/net/dsa/mv88e6xxx/global1_vtu.c | 58 +++++++++++++++++++++++++
 2 files changed, 62 insertions(+)

diff --git a/drivers/net/dsa/mv88e6xxx/global1.h b/drivers/net/dsa/mv88e6xxx/global1.h
index 6d1d1262fe41..ba8b4b4c685b 100644
--- a/drivers/net/dsa/mv88e6xxx/global1.h
+++ b/drivers/net/dsa/mv88e6xxx/global1.h
@@ -306,6 +306,10 @@ int mv88e6185_g1_vtu_getnext(struct mv88e6xxx_chip *chip,
 			     struct mv88e6xxx_vtu_entry *entry);
 int mv88e6185_g1_vtu_loadpurge(struct mv88e6xxx_chip *chip,
 			       struct mv88e6xxx_vtu_entry *entry);
+int mv88e6250_g1_vtu_getnext(struct mv88e6xxx_chip *chip,
+			     struct mv88e6xxx_vtu_entry *entry);
+int mv88e6250_g1_vtu_loadpurge(struct mv88e6xxx_chip *chip,
+			       struct mv88e6xxx_vtu_entry *entry);
 int mv88e6352_g1_vtu_getnext(struct mv88e6xxx_chip *chip,
 			     struct mv88e6xxx_vtu_entry *entry);
 int mv88e6352_g1_vtu_loadpurge(struct mv88e6xxx_chip *chip,
diff --git a/drivers/net/dsa/mv88e6xxx/global1_vtu.c b/drivers/net/dsa/mv88e6xxx/global1_vtu.c
index 058326924f3e..a8ef268c32cb 100644
--- a/drivers/net/dsa/mv88e6xxx/global1_vtu.c
+++ b/drivers/net/dsa/mv88e6xxx/global1_vtu.c
@@ -307,6 +307,35 @@ static int mv88e6xxx_g1_vtu_getnext(struct mv88e6xxx_chip *chip,
 	return mv88e6xxx_g1_vtu_vid_read(chip, entry);
 }
 
+int mv88e6250_g1_vtu_getnext(struct mv88e6xxx_chip *chip,
+			     struct mv88e6xxx_vtu_entry *entry)
+{
+	u16 val;
+	int err;
+
+	err = mv88e6xxx_g1_vtu_getnext(chip, entry);
+	if (err)
+		return err;
+
+	if (entry->valid) {
+		err = mv88e6185_g1_vtu_data_read(chip, entry);
+		if (err)
+			return err;
+
+		/* VTU DBNum[3:0] are located in VTU Operation 3:0
+		 * VTU DBNum[5:4] are located in VTU Operation 9:8
+		 */
+		err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_VTU_OP, &val);
+		if (err)
+			return err;
+
+		entry->fid = val & 0x000f;
+		entry->fid |= (val & 0x0300) >> 4;
+	}
+
+	return 0;
+}
+
 int mv88e6185_g1_vtu_getnext(struct mv88e6xxx_chip *chip,
 			     struct mv88e6xxx_vtu_entry *entry)
 {
@@ -396,6 +425,35 @@ int mv88e6390_g1_vtu_getnext(struct mv88e6xxx_chip *chip,
 	return 0;
 }
 
+int mv88e6250_g1_vtu_loadpurge(struct mv88e6xxx_chip *chip,
+			       struct mv88e6xxx_vtu_entry *entry)
+{
+	u16 op = MV88E6XXX_G1_VTU_OP_VTU_LOAD_PURGE;
+	int err;
+
+	err = mv88e6xxx_g1_vtu_op_wait(chip);
+	if (err)
+		return err;
+
+	err = mv88e6xxx_g1_vtu_vid_write(chip, entry);
+	if (err)
+		return err;
+
+	if (entry->valid) {
+		err = mv88e6185_g1_vtu_data_write(chip, entry);
+		if (err)
+			return err;
+
+		/* VTU DBNum[3:0] are located in VTU Operation 3:0
+		 * VTU DBNum[5:4] are located in VTU Operation 9:8
+		 */
+		op |= entry->fid & 0x000f;
+		op |= (entry->fid & 0x0030) << 8;
+	}
+
+	return mv88e6xxx_g1_vtu_op(chip, op);
+}
+
 int mv88e6185_g1_vtu_loadpurge(struct mv88e6xxx_chip *chip,
 			       struct mv88e6xxx_vtu_entry *entry)
 {
-- 
2.20.1

[PATCH net-next v4 05/10] net: dsa: mv88e6xxx: implement watchdog_ops for mv88e6250

[Rasmus Villemoes]

The MV88E6352_G2_WDOG_CTL_* bits almost, but not quite, describe the
watchdog control register on the mv88e6250. Among those actually
referenced in the code, only QC_ENABLE differs (bit 6 rather than bit
5).

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
 drivers/net/dsa/mv88e6xxx/global2.c | 26 ++++++++++++++++++++++++++
 drivers/net/dsa/mv88e6xxx/global2.h | 14 ++++++++++++++
 2 files changed, 40 insertions(+)

diff --git a/drivers/net/dsa/mv88e6xxx/global2.c b/drivers/net/dsa/mv88e6xxx/global2.c
index 91a3cb2452ac..85984eb69ffd 100644
--- a/drivers/net/dsa/mv88e6xxx/global2.c
+++ b/drivers/net/dsa/mv88e6xxx/global2.c
@@ -816,6 +816,32 @@ const struct mv88e6xxx_irq_ops mv88e6097_watchdog_ops = {
 	.irq_free = mv88e6097_watchdog_free,
 };
 
+static void mv88e6250_watchdog_free(struct mv88e6xxx_chip *chip)
+{
+	u16 reg;
+
+	mv88e6xxx_g2_read(chip, MV88E6250_G2_WDOG_CTL, &reg);
+
+	reg &= ~(MV88E6250_G2_WDOG_CTL_EGRESS_ENABLE |
+		 MV88E6250_G2_WDOG_CTL_QC_ENABLE);
+
+	mv88e6xxx_g2_write(chip, MV88E6250_G2_WDOG_CTL, reg);
+}
+
+static int mv88e6250_watchdog_setup(struct mv88e6xxx_chip *chip)
+{
+	return mv88e6xxx_g2_write(chip, MV88E6250_G2_WDOG_CTL,
+				  MV88E6250_G2_WDOG_CTL_EGRESS_ENABLE |
+				  MV88E6250_G2_WDOG_CTL_QC_ENABLE |
+				  MV88E6250_G2_WDOG_CTL_SWRESET);
+}
+
+const struct mv88e6xxx_irq_ops mv88e6250_watchdog_ops = {
+	.irq_action = mv88e6097_watchdog_action,
+	.irq_setup = mv88e6250_watchdog_setup,
+	.irq_free = mv88e6250_watchdog_free,
+};
+
 static int mv88e6390_watchdog_setup(struct mv88e6xxx_chip *chip)
 {
 	return mv88e6xxx_g2_update(chip, MV88E6390_G2_WDOG_CTL,
diff --git a/drivers/net/dsa/mv88e6xxx/global2.h b/drivers/net/dsa/mv88e6xxx/global2.h
index 194660d8c783..6205c6b75bc7 100644
--- a/drivers/net/dsa/mv88e6xxx/global2.h
+++ b/drivers/net/dsa/mv88e6xxx/global2.h
@@ -205,6 +205,18 @@
 #define MV88E6XXX_G2_SCRATCH_MISC_PTR_MASK	0x7f00
 #define MV88E6XXX_G2_SCRATCH_MISC_DATA_MASK	0x00ff
 
+/* Offset 0x1B: Watch Dog Control Register */
+#define MV88E6250_G2_WDOG_CTL			0x1b
+#define MV88E6250_G2_WDOG_CTL_QC_HISTORY	0x0100
+#define MV88E6250_G2_WDOG_CTL_QC_EVENT		0x0080
+#define MV88E6250_G2_WDOG_CTL_QC_ENABLE		0x0040
+#define MV88E6250_G2_WDOG_CTL_EGRESS_HISTORY	0x0020
+#define MV88E6250_G2_WDOG_CTL_EGRESS_EVENT	0x0010
+#define MV88E6250_G2_WDOG_CTL_EGRESS_ENABLE	0x0008
+#define MV88E6250_G2_WDOG_CTL_FORCE_IRQ		0x0004
+#define MV88E6250_G2_WDOG_CTL_HISTORY		0x0002
+#define MV88E6250_G2_WDOG_CTL_SWRESET		0x0001
+
 /* Offset 0x1B: Watch Dog Control Register */
 #define MV88E6352_G2_WDOG_CTL			0x1b
 #define MV88E6352_G2_WDOG_CTL_EGRESS_EVENT	0x0080
@@ -334,6 +346,7 @@ int mv88e6xxx_g2_device_mapping_write(struct mv88e6xxx_chip *chip, int target,
 				      int port);
 
 extern const struct mv88e6xxx_irq_ops mv88e6097_watchdog_ops;
+extern const struct mv88e6xxx_irq_ops mv88e6250_watchdog_ops;
 extern const struct mv88e6xxx_irq_ops mv88e6390_watchdog_ops;
 
 extern const struct mv88e6xxx_avb_ops mv88e6165_avb_ops;
@@ -484,6 +497,7 @@ static inline int mv88e6xxx_g2_pot_clear(struct mv88e6xxx_chip *chip)
 }
 
 static const struct mv88e6xxx_irq_ops mv88e6097_watchdog_ops = {};
+static const struct mv88e6xxx_irq_ops mv88e6250_watchdog_ops = {};
 static const struct mv88e6xxx_irq_ops mv88e6390_watchdog_ops = {};
 
 static const struct mv88e6xxx_avb_ops mv88e6165_avb_ops = {};
-- 
2.20.1

[PATCH net-next v4 06/10] net: dsa: mv88e6xxx: implement port_set_speed for mv88e6250

[Rasmus Villemoes]

The data sheet also mentions the possibility of selecting 200 Mbps for
the MII ports (ports 5 and 6) by setting the ForceSpd field to
0x2 (aka MV88E6065_PORT_MAC_CTL_SPEED_200). However, there's a note
that "actual speed is determined by bit 8 above", and flipping back a
page, one finds that bits 13:8 are reserved...

So without further information on what bit 8 means, let's stick to
supporting just 10 and 100 Mbps on all ports.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
 drivers/net/dsa/mv88e6xxx/port.c | 12 ++++++++++++
 drivers/net/dsa/mv88e6xxx/port.h |  1 +
 2 files changed, 13 insertions(+)

diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c
index c44b2822e4dd..a41bca17cba1 100644
--- a/drivers/net/dsa/mv88e6xxx/port.c
+++ b/drivers/net/dsa/mv88e6xxx/port.c
@@ -294,6 +294,18 @@ int mv88e6185_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed)
 	return mv88e6xxx_port_set_speed(chip, port, speed, false, false);
 }
 
+/* Support 10, 100 Mbps (e.g. 88E6250 family) */
+int mv88e6250_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed)
+{
+	if (speed == SPEED_MAX)
+		speed = 100;
+
+	if (speed > 100)
+		return -EOPNOTSUPP;
+
+	return mv88e6xxx_port_set_speed(chip, port, speed, false, false);
+}
+
 /* Support 10, 100, 200, 1000, 2500 Mbps (e.g. 88E6341) */
 int mv88e6341_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed)
 {
diff --git a/drivers/net/dsa/mv88e6xxx/port.h b/drivers/net/dsa/mv88e6xxx/port.h
index 39c85e98fb92..1957e3e1cf47 100644
--- a/drivers/net/dsa/mv88e6xxx/port.h
+++ b/drivers/net/dsa/mv88e6xxx/port.h
@@ -279,6 +279,7 @@ int mv88e6xxx_port_set_duplex(struct mv88e6xxx_chip *chip, int port, int dup);
 
 int mv88e6065_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed);
 int mv88e6185_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed);
+int mv88e6250_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed);
 int mv88e6341_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed);
 int mv88e6352_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed);
 int mv88e6390_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed);
-- 
2.20.1

[PATCH net-next v4 07/10] net: dsa: mv88e6xxx: implement port_link_state for mv88e6250

[Rasmus Villemoes]

The mv88e6250 has a rather different way of reporting the link, speed
and duplex status. A simple difference is that the link bit is bit 12
rather than bit 11 of the port status register.

It gets more complicated for speed and duplex, which do not have
separate fields. Instead, there's a four-bit PortMode field, and
decoding that depends on whether it's a phy or mii port. For the phy
ports, only four of the 16 values have defined meaning; the rest are
called "reserved", so returning {SPEED,DUPLEX}_UNKNOWN seems
reasonable.

For the mii ports, most possible values are documented (0x3 and 0x5
are reserved), but I'm unable to make sense of them all. Since the
bits simply reflect the Px_MODE[3:0] configuration pins, just support
the subset that I'm certain about. Support for other setups can be
added later.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
 drivers/net/dsa/mv88e6xxx/port.c | 65 ++++++++++++++++++++++++++++++++
 drivers/net/dsa/mv88e6xxx/port.h | 12 ++++++
 2 files changed, 77 insertions(+)

diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c
index a41bca17cba1..a9a308051d7c 100644
--- a/drivers/net/dsa/mv88e6xxx/port.c
+++ b/drivers/net/dsa/mv88e6xxx/port.c
@@ -533,6 +533,71 @@ int mv88e6352_port_get_cmode(struct mv88e6xxx_chip *chip, int port, u8 *cmode)
 	return 0;
 }
 
+int mv88e6250_port_link_state(struct mv88e6xxx_chip *chip, int port,
+			      struct phylink_link_state *state)
+{
+	int err;
+	u16 reg;
+
+	err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, &reg);
+	if (err)
+		return err;
+
+	if (port < 5) {
+		switch (reg & MV88E6250_PORT_STS_PORTMODE_MASK) {
+		case MV88E6250_PORT_STS_PORTMODE_PHY_10_HALF:
+			state->speed = SPEED_10;
+			state->duplex = DUPLEX_HALF;
+			break;
+		case MV88E6250_PORT_STS_PORTMODE_PHY_100_HALF:
+			state->speed = SPEED_100;
+			state->duplex = DUPLEX_HALF;
+			break;
+		case MV88E6250_PORT_STS_PORTMODE_PHY_10_FULL:
+			state->speed = SPEED_10;
+			state->duplex = DUPLEX_FULL;
+			break;
+		case MV88E6250_PORT_STS_PORTMODE_PHY_100_FULL:
+			state->speed = SPEED_100;
+			state->duplex = DUPLEX_FULL;
+			break;
+		default:
+			state->speed = SPEED_UNKNOWN;
+			state->duplex = DUPLEX_UNKNOWN;
+			break;
+		}
+	} else {
+		switch (reg & MV88E6250_PORT_STS_PORTMODE_MASK) {
+		case MV88E6250_PORT_STS_PORTMODE_MII_10_HALF:
+			state->speed = SPEED_10;
+			state->duplex = DUPLEX_HALF;
+			break;
+		case MV88E6250_PORT_STS_PORTMODE_MII_100_HALF:
+			state->speed = SPEED_100;
+			state->duplex = DUPLEX_HALF;
+			break;
+		case MV88E6250_PORT_STS_PORTMODE_MII_10_FULL:
+			state->speed = SPEED_10;
+			state->duplex = DUPLEX_FULL;
+			break;
+		case MV88E6250_PORT_STS_PORTMODE_MII_100_FULL:
+			state->speed = SPEED_100;
+			state->duplex = DUPLEX_FULL;
+			break;
+		default:
+			state->speed = SPEED_UNKNOWN;
+			state->duplex = DUPLEX_UNKNOWN;
+			break;
+		}
+	}
+
+	state->link = !!(reg & MV88E6250_PORT_STS_LINK);
+	state->an_enabled = 1;
+	state->an_complete = state->link;
+
+	return 0;
+}
+
 int mv88e6352_port_link_state(struct mv88e6xxx_chip *chip, int port,
 			      struct phylink_link_state *state)
 {
diff --git a/drivers/net/dsa/mv88e6xxx/port.h b/drivers/net/dsa/mv88e6xxx/port.h
index 1957e3e1cf47..3a89c2868cec 100644
--- a/drivers/net/dsa/mv88e6xxx/port.h
+++ b/drivers/net/dsa/mv88e6xxx/port.h
@@ -23,6 +23,16 @@
 #define MV88E6XXX_PORT_STS_MY_PAUSE		0x4000
 #define MV88E6XXX_PORT_STS_HD_FLOW		0x2000
 #define MV88E6XXX_PORT_STS_PHY_DETECT		0x1000
+#define MV88E6250_PORT_STS_LINK				0x1000
+#define MV88E6250_PORT_STS_PORTMODE_MASK		0x0f00
+#define MV88E6250_PORT_STS_PORTMODE_PHY_10_HALF		0x0800
+#define MV88E6250_PORT_STS_PORTMODE_PHY_100_HALF	0x0900
+#define MV88E6250_PORT_STS_PORTMODE_PHY_10_FULL		0x0a00
+#define MV88E6250_PORT_STS_PORTMODE_PHY_100_FULL	0x0b00
+#define MV88E6250_PORT_STS_PORTMODE_MII_10_HALF		0x0c00
+#define MV88E6250_PORT_STS_PORTMODE_MII_100_HALF	0x0d00
+#define MV88E6250_PORT_STS_PORTMODE_MII_10_FULL		0x0e00
+#define MV88E6250_PORT_STS_PORTMODE_MII_100_FULL	0x0f00
 #define MV88E6XXX_PORT_STS_LINK			0x0800
 #define MV88E6XXX_PORT_STS_DUPLEX		0x0400
 #define MV88E6XXX_PORT_STS_SPEED_MASK		0x0300
@@ -333,6 +343,8 @@ int mv88e6185_port_get_cmode(struct mv88e6xxx_chip *chip, int port, u8 *cmode);
 int mv88e6352_port_get_cmode(struct mv88e6xxx_chip *chip, int port, u8 *cmode);
 int mv88e6185_port_link_state(struct mv88e6xxx_chip *chip, int port,
 			      struct phylink_link_state *state);
+int mv88e6250_port_link_state(struct mv88e6xxx_chip *chip, int port,
+			      struct phylink_link_state *state);
 int mv88e6352_port_link_state(struct mv88e6xxx_chip *chip, int port,
 			      struct phylink_link_state *state);
 int mv88e6xxx_port_set_map_da(struct mv88e6xxx_chip *chip, int port);
-- 
2.20.1

[PATCH net-next v4 08/10] net: dsa: mv88e6xxx: add support for mv88e6250

[Rasmus Villemoes]

This adds support for the Marvell 88E6250. I've checked that each
member in the ops-structure makes sense, and basic switchdev
functionality works fine.

It uses the new dual_chip option, and since its port registers start
at SMI address 0x08 or 0x18 (i.e., always sw_addr + 0x08), we need to
introduce a new compatible string in order for the auto-identification
in mv88e6xxx_detect() to work.

The chip has four per port 16-bits statistics registers, two of which
correspond to the existing "sw_in_filtered" and "sw_out_filtered" (but
at offsets 0x13 and 0x10 rather than 0x12 and 0x13, because why should
this be easy...). Wiring up those four statistics seems to require
introducing a STATS_TYPE_PORT_6250 bit or similar, which seems a tad
ugly, so for now this just allows access to the STATS_TYPE_BANK0 ones.

The chip does have ptp support, and the existing
mv88e6352_{gpio,avb,ptp}_ops at first glance seem like they would work
out-of-the-box, but for simplicity (and lack of testing) I'm eliding
this.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
 drivers/net/dsa/mv88e6xxx/chip.c    | 81 +++++++++++++++++++++++++++++
 drivers/net/dsa/mv88e6xxx/chip.h    |  2 +
 drivers/net/dsa/mv88e6xxx/global1.c | 19 +++++++
 drivers/net/dsa/mv88e6xxx/global1.h |  1 +
 drivers/net/dsa/mv88e6xxx/port.h    |  1 +
 5 files changed, 104 insertions(+)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 12f165a71a6c..df9c51da7733 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -829,6 +829,12 @@ static int mv88e6095_stats_get_strings(struct mv88e6xxx_chip *chip,
 					   STATS_TYPE_BANK0 | STATS_TYPE_PORT);
 }
 
+static int mv88e6250_stats_get_strings(struct mv88e6xxx_chip *chip,
+				       uint8_t *data)
+{
+	return mv88e6xxx_stats_get_strings(chip, data, STATS_TYPE_BANK0);
+}
+
 static int mv88e6320_stats_get_strings(struct mv88e6xxx_chip *chip,
 				       uint8_t *data)
 {
@@ -899,6 +905,11 @@ static int mv88e6095_stats_get_sset_count(struct mv88e6xxx_chip *chip)
 					      STATS_TYPE_PORT);
 }
 
+static int mv88e6250_stats_get_sset_count(struct mv88e6xxx_chip *chip)
+{
+	return mv88e6xxx_stats_get_sset_count(chip, STATS_TYPE_BANK0);
+}
+
 static int mv88e6320_stats_get_sset_count(struct mv88e6xxx_chip *chip)
 {
 	return mv88e6xxx_stats_get_sset_count(chip, STATS_TYPE_BANK0 |
@@ -966,6 +977,13 @@ static int mv88e6095_stats_get_stats(struct mv88e6xxx_chip *chip, int port,
 					 0, MV88E6XXX_G1_STATS_OP_HIST_RX_TX);
 }
 
+static int mv88e6250_stats_get_stats(struct mv88e6xxx_chip *chip, int port,
+				     uint64_t *data)
+{
+	return mv88e6xxx_stats_get_stats(chip, port, data, STATS_TYPE_BANK0,
+					 0, MV88E6XXX_G1_STATS_OP_HIST_RX_TX);
+}
+
 static int mv88e6320_stats_get_stats(struct mv88e6xxx_chip *chip, int port,
 				     uint64_t *data)
 {
@@ -3448,6 +3466,44 @@ static const struct mv88e6xxx_ops mv88e6240_ops = {
 	.phylink_validate = mv88e6352_phylink_validate,
 };
 
+static const struct mv88e6xxx_ops mv88e6250_ops = {
+	/* MV88E6XXX_FAMILY_6250 */
+	.ieee_pri_map = mv88e6250_g1_ieee_pri_map,
+	.ip_pri_map = mv88e6085_g1_ip_pri_map,
+	.irl_init_all = mv88e6352_g2_irl_init_all,
+	.get_eeprom = mv88e6xxx_g2_get_eeprom16,
+	.set_eeprom = mv88e6xxx_g2_set_eeprom16,
+	.set_switch_mac = mv88e6xxx_g2_set_switch_mac,
+	.phy_read = mv88e6xxx_g2_smi_phy_read,
+	.phy_write = mv88e6xxx_g2_smi_phy_write,
+	.port_set_link = mv88e6xxx_port_set_link,
+	.port_set_duplex = mv88e6xxx_port_set_duplex,
+	.port_set_rgmii_delay = mv88e6352_port_set_rgmii_delay,
+	.port_set_speed = mv88e6250_port_set_speed,
+	.port_tag_remap = mv88e6095_port_tag_remap,
+	.port_set_frame_mode = mv88e6351_port_set_frame_mode,
+	.port_set_egress_floods = mv88e6352_port_set_egress_floods,
+	.port_set_ether_type = mv88e6351_port_set_ether_type,
+	.port_egress_rate_limiting = mv88e6097_port_egress_rate_limiting,
+	.port_pause_limit = mv88e6097_port_pause_limit,
+	.port_disable_pri_override = mv88e6xxx_port_disable_pri_override,
+	.port_link_state = mv88e6250_port_link_state,
+	.stats_snapshot = mv88e6320_g1_stats_snapshot,
+	.stats_set_histogram = mv88e6095_g1_stats_set_histogram,
+	.stats_get_sset_count = mv88e6250_stats_get_sset_count,
+	.stats_get_strings = mv88e6250_stats_get_strings,
+	.stats_get_stats = mv88e6250_stats_get_stats,
+	.set_cpu_port = mv88e6095_g1_set_cpu_port,
+	.set_egress_port = mv88e6095_g1_set_egress_port,
+	.watchdog_ops = &mv88e6250_watchdog_ops,
+	.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
+	.pot_clear = mv88e6xxx_g2_pot_clear,
+	.reset = mv88e6250_g1_reset,
+	.vtu_getnext = mv88e6250_g1_vtu_getnext,
+	.vtu_loadpurge = mv88e6250_g1_vtu_loadpurge,
+	.phylink_validate = mv88e6065_phylink_validate,
+};
+
 static const struct mv88e6xxx_ops mv88e6290_ops = {
 	/* MV88E6XXX_FAMILY_6390 */
 	.setup_errata = mv88e6390_setup_errata,
@@ -4233,6 +4289,27 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
 		.ops = &mv88e6240_ops,
 	},
 
+	[MV88E6250] = {
+		.prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6250,
+		.family = MV88E6XXX_FAMILY_6250,
+		.name = "Marvell 88E6250",
+		.num_databases = 64,
+		.num_ports = 7,
+		.num_internal_phys = 5,
+		.max_vid = 4095,
+		.port_base_addr = 0x08,
+		.phy_base_addr = 0x00,
+		.global1_addr = 0x0f,
+		.global2_addr = 0x07,
+		.age_time_coeff = 15000,
+		.g1_irqs = 9,
+		.g2_irqs = 10,
+		.atu_move_port_mask = 0xf,
+		.dual_chip = true,
+		.tag_protocol = DSA_TAG_PROTO_DSA,
+		.ops = &mv88e6250_ops,
+	},
+
 	[MV88E6290] = {
 		.prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6290,
 		.family = MV88E6XXX_FAMILY_6390,
@@ -4841,6 +4918,10 @@ static const struct of_device_id mv88e6xxx_of_match[] = {
 		.compatible = "marvell,mv88e6190",
 		.data = &mv88e6xxx_table[MV88E6190],
 	},
+	{
+		.compatible = "marvell,mv88e6250",
+		.data = &mv88e6xxx_table[MV88E6250],
+	},
 	{ /* sentinel */ },
 };
 
diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h
index 74777c3bc313..2fbe72b7587b 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.h
+++ b/drivers/net/dsa/mv88e6xxx/chip.h
@@ -62,6 +62,7 @@ enum mv88e6xxx_model {
 	MV88E6190X,
 	MV88E6191,
 	MV88E6240,
+	MV88E6250,
 	MV88E6290,
 	MV88E6320,
 	MV88E6321,
@@ -80,6 +81,7 @@ enum mv88e6xxx_family {
 	MV88E6XXX_FAMILY_6097,	/* 6046 6085 6096 6097 */
 	MV88E6XXX_FAMILY_6165,	/* 6123 6161 6165 */
 	MV88E6XXX_FAMILY_6185,	/* 6108 6121 6122 6131 6152 6155 6182 6185 */
+	MV88E6XXX_FAMILY_6250,	/* 6250 */
 	MV88E6XXX_FAMILY_6320,	/* 6320 6321 */
 	MV88E6XXX_FAMILY_6341,	/* 6141 6341 */
 	MV88E6XXX_FAMILY_6351,	/* 6171 6175 6350 6351 */
diff --git a/drivers/net/dsa/mv88e6xxx/global1.c b/drivers/net/dsa/mv88e6xxx/global1.c
index c851b7b532a4..fc10b6e495f5 100644
--- a/drivers/net/dsa/mv88e6xxx/global1.c
+++ b/drivers/net/dsa/mv88e6xxx/global1.c
@@ -182,6 +182,25 @@ int mv88e6185_g1_reset(struct mv88e6xxx_chip *chip)
 	return mv88e6185_g1_wait_ppu_polling(chip);
 }
 
+int mv88e6250_g1_reset(struct mv88e6xxx_chip *chip)
+{
+	u16 val;
+	int err;
+
+	/* Set the SWReset bit 15 */
+	err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_CTL1, &val);
+	if (err)
+		return err;
+
+	val |= MV88E6XXX_G1_CTL1_SW_RESET;
+
+	err = mv88e6xxx_g1_write(chip, MV88E6XXX_G1_CTL1, val);
+	if (err)
+		return err;
+
+	return mv88e6xxx_g1_wait_init_ready(chip);
+}
+
 int mv88e6352_g1_reset(struct mv88e6xxx_chip *chip)
 {
 	u16 val;
diff --git a/drivers/net/dsa/mv88e6xxx/global1.h b/drivers/net/dsa/mv88e6xxx/global1.h
index ba8b4b4c685b..9681ce25598a 100644
--- a/drivers/net/dsa/mv88e6xxx/global1.h
+++ b/drivers/net/dsa/mv88e6xxx/global1.h
@@ -259,6 +259,7 @@ int mv88e6xxx_g1_set_switch_mac(struct mv88e6xxx_chip *chip, u8 *addr);
 
 int mv88e6185_g1_reset(struct mv88e6xxx_chip *chip);
 int mv88e6352_g1_reset(struct mv88e6xxx_chip *chip);
+int mv88e6250_g1_reset(struct mv88e6xxx_chip *chip);
 
 int mv88e6185_g1_ppu_enable(struct mv88e6xxx_chip *chip);
 int mv88e6185_g1_ppu_disable(struct mv88e6xxx_chip *chip);
diff --git a/drivers/net/dsa/mv88e6xxx/port.h b/drivers/net/dsa/mv88e6xxx/port.h
index 3a89c2868cec..b3b57ea6ef07 100644
--- a/drivers/net/dsa/mv88e6xxx/port.h
+++ b/drivers/net/dsa/mv88e6xxx/port.h
@@ -122,6 +122,7 @@
 #define MV88E6XXX_PORT_SWITCH_ID_PROD_6191	0x1910
 #define MV88E6XXX_PORT_SWITCH_ID_PROD_6185	0x1a70
 #define MV88E6XXX_PORT_SWITCH_ID_PROD_6240	0x2400
+#define MV88E6XXX_PORT_SWITCH_ID_PROD_6250	0x2500
 #define MV88E6XXX_PORT_SWITCH_ID_PROD_6290	0x2900
 #define MV88E6XXX_PORT_SWITCH_ID_PROD_6321	0x3100
 #define MV88E6XXX_PORT_SWITCH_ID_PROD_6141	0x3400
-- 
2.20.1

[PATCH net-next v4 09/10] dt-bindings: net: dsa: marvell: add "marvell,mv88e6250" compatible string

[Rasmus Villemoes]

The mv88e6250 has port_base_addr 0x8 or 0x18 (depending on
configuration pins), so it constitutes a new family and hence needs
its own compatible string.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
 Documentation/devicetree/bindings/net/dsa/marvell.txt | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt
index feb007af13cb..6f9538974bb9 100644
--- a/Documentation/devicetree/bindings/net/dsa/marvell.txt
+++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt
@@ -21,10 +21,13 @@ which is at a different MDIO base address in different switch families.
 			  6341, 6350, 6351, 6352
 - "marvell,mv88e6190"	: Switch has base address 0x00. Use with models:
 			  6190, 6190X, 6191, 6290, 6390, 6390X
+- "marvell,mv88e6250"	: Switch has base address 0x08 or 0x18. Use with model:
+			  6250
 
 Required properties:
-- compatible		: Should be one of "marvell,mv88e6085" or
-			  "marvell,mv88e6190" as indicated above
+- compatible		: Should be one of "marvell,mv88e6085",
+			  "marvell,mv88e6190" or "marvell,mv88e6250" as
+			  indicated above
 - reg			: Address on the MII bus for the switch.
 
 Optional properties:
-- 
2.20.1

[PATCH net-next v4 10/10] net: dsa: mv88e6xxx: refactor mv88e6352_g1_reset

[Rasmus Villemoes]

The new mv88e6250_g1_reset() is identical to mv88e6352_g1_reset() except
for the call of mv88e6352_g1_wait_ppu_polling(), so refactor the 6352
version in term of the 6250 one. No functional change.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
 drivers/net/dsa/mv88e6xxx/global1.c | 14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/global1.c b/drivers/net/dsa/mv88e6xxx/global1.c
index fc10b6e495f5..41c0792a2e2b 100644
--- a/drivers/net/dsa/mv88e6xxx/global1.c
+++ b/drivers/net/dsa/mv88e6xxx/global1.c
@@ -203,21 +203,9 @@ int mv88e6250_g1_reset(struct mv88e6xxx_chip *chip)
 
 int mv88e6352_g1_reset(struct mv88e6xxx_chip *chip)
 {
-	u16 val;
 	int err;
 
-	/* Set the SWReset bit 15 */
-	err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_CTL1, &val);
-	if (err)
-		return err;
-
-	val |= MV88E6XXX_G1_CTL1_SW_RESET;
-
-	err = mv88e6xxx_g1_write(chip, MV88E6XXX_G1_CTL1, val);
-	if (err)
-		return err;
-
-	err = mv88e6xxx_g1_wait_init_ready(chip);
+	err = mv88e6250_g1_reset(chip);
 	if (err)
 		return err;
 
-- 
2.20.1

Re: [PATCH net-next v4 00/10] net: dsa: mv88e6xxx: support for mv88e6250

[David Miller]

From: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Date: Tue, 4 Jun 2019 07:34:22 +0000

> This adds support for the mv88e6250 chip. Initially based on the
> mv88e6240, this time around, I've been through each ->ops callback and
> checked that it makes sense, either replacing with a 6250 specific
> variant or dropping it if no equivalent functionality seems to exist
> for the 6250. Along the way, I found a few oddities in the existing
> code, mostly sent as separate patches/questions.
> 
> The one relevant to the 6250 is the ieee_pri_map callback, where the
> existing mv88e6085_g1_ieee_pri_map() is actually wrong for many of the
> existing users. I've put the mv88e6250_g1_ieee_pri_map() patch first
> in case some of the existing chips get switched over to use that and
> it is deemed important enough for -stable.
 ...

Series applied, thanks.