Re: [Qemu-devel] [PATCH v2 0/9] Add i.MX6 (Single/Dual/Quad) support

[Jean-Christophe DUBOIS <jcd@tribudubois.net>]

Peter,

Can I merge the 2 i.MX series as one depend on the other.

Thanks

JC

Le 28/02/2016 21:27, Jean-Christophe DUBOIS a écrit :
> Peter,
>
> Are you OK if I merge the 2 series (i.MX6 and SPI for i.MX6) into a 
> single series?
>
> Thanks.
>
> JC
>
> Le 08/02/2016 23:08, Jean-Christophe Dubois a écrit :
>> This patch series adds support for the Freescale i.MX6 processor.
>>
>> For now we only support the following devices:
>> * up to 4 Cortex A9 cores
>> * A9 MPCORE (SCU, GIC, TWD)
>> * 5 i.MX UARTs
>> * 2 EPIT timers
>> * 1 GPT timer
>> * 7 GPIO controllers
>> * 6 SDHC controllers
>> * 1 CCM device
>> * 1 SRC device
>> * 3 I2C devices
>> * various ROM/RAM areas.
>>
>> This also adds the sabrelite board as a an actual platform for i.MX6.
>>
>> This series was tested by booting a 4.4 linux kernel (using the
>> imx_v6_v7_defconfig file as kernel configuration).
>>
>> Note1: as sabrelite uses uart2 as console, you have to redirect the 
>> second
>> QEMU serial port to stdout.
>>      qemu-system-arm -M sabrelite -display none ... -serial null 
>> -serial stdio
>>
>> Note2: as the SPI controller is not yet supported in QEMU for i.MX 
>> you need
>> to disable SPI controllers in Linux DTS tree. Otherwise Linux would hang
>> during the boot waiting for a SPI device to respond.
>>
>> Note3: You need to disable the GPIO section related to physical push 
>> buttons
>> in the Linux DTS tree in order to avoid excecive interrupt triggering on
>> GPIO devices for non existant buttons.
>>
>> Jean-Christophe Dubois (9):
>>    i.MX: Allow GPT timer to rollover.
>>    i.MX: Rename CCM NOCLK to CLK_NONE for naming consistency.
>>    i.MX: Remove CCM useless clock computation handling.
>>    i.MX: Add the CLK_IPG_HIGH clock
>>    i.MX: Add i.MX6 CCM and ANALOG device.
>>    i.MX: Add i.MX6 System Reset Controller device.
>>    i.MX: Add i.MX6 SOC implementation.
>>    i.MX: Add sabrelite i.MX6 emulation.
>>    i.MX: Add missing descriptions in devices.
>>
>>   default-configs/arm-softmmu.mak |   1 +
>>   hw/arm/Makefile.objs            |   1 +
>>   hw/arm/fsl-imx25.c              |   1 +
>>   hw/arm/fsl-imx31.c              |   1 +
>>   hw/arm/fsl-imx6.c               | 407 +++++++++++++++++++++
>>   hw/arm/sabrelite.c              |  93 +++++
>>   hw/i2c/imx_i2c.c                |   1 +
>>   hw/misc/Makefile.objs           |   2 +
>>   hw/misc/imx25_ccm.c             |  29 +-
>>   hw/misc/imx31_ccm.c             |  35 +-
>>   hw/misc/imx6_ccm.c              | 773 
>> ++++++++++++++++++++++++++++++++++++++++
>>   hw/misc/imx6_src.c              | 353 ++++++++++++++++++
>>   hw/net/imx_fec.c                |   1 +
>>   hw/timer/imx_epit.c             |   8 +-
>>   hw/timer/imx_gpt.c              |  43 +--
>>   include/hw/arm/fsl-imx6.h       | 447 +++++++++++++++++++++++
>>   include/hw/misc/imx6_ccm.h      | 197 ++++++++++
>>   include/hw/misc/imx6_src.h      |  73 ++++
>>   include/hw/misc/imx_ccm.h       |  10 +-
>>   19 files changed, 2384 insertions(+), 92 deletions(-)
>>   create mode 100644 hw/arm/fsl-imx6.c
>>   create mode 100644 hw/arm/sabrelite.c
>>   create mode 100644 hw/misc/imx6_ccm.c
>>   create mode 100644 hw/misc/imx6_src.c
>>   create mode 100644 include/hw/arm/fsl-imx6.h
>>   create mode 100644 include/hw/misc/imx6_ccm.h
>>   create mode 100644 include/hw/misc/imx6_src.h
>>
>
>
>