From: Jesse Taube <mr.bossman075@gmail.com> To: linux-imx@nxp.com Cc: mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, ulf.hansson@linaro.org, aisheng.dong@nxp.com, stefan@agner.ch, linus.walleij@linaro.org, gregkh@linuxfoundation.org, arnd@arndb.de, olof@lixom.net, soc@kernel.org, linux@armlinux.org.uk, abel.vesa@nxp.com, adrian.hunter@intel.com, jirislaby@kernel.org, giulio.benetti@benettiengineering.com, nobuhiro1.iwamatsu@toshiba.co.jp, Mr.Bossman075@gmail.com, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org, linux-gpio@vger.kernel.org, linux-serial@vger.kernel.org, Jesse Taube <mr.bossman075@gmail.com> Subject: [PATCH v3 02/13] dt-bindings: pinctrl: add i.MXRT1050 pinctrl binding doc Date: Thu, 25 Nov 2021 16:14:32 -0500 [thread overview] Message-ID: <20211125211443.1150135-3-Mr.Bossman075@gmail.com> (raw) In-Reply-To: <20211125211443.1150135-1-Mr.Bossman075@gmail.com> From: Jesse Taube <mr.bossman075@gmail.com> Add i.MXRT1050 pinctrl binding doc Cc: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> --- V1->V2: * Replace macros with values * Add tab for last pinctrl value V2->V3: * Remove imxrt1050-evk container * Remove unnecessary handles * 2 space tabs to 4 --- .../bindings/pinctrl/fsl,imxrt1050.yaml | 79 +++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml new file mode 100644 index 000000000000..1278f7293560 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,imxrt1050.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale IMXRT1050 IOMUX Controller + +maintainers: + - Giulio Benetti <giulio.benetti@benettiengineering.com> + - Jesse Taube <Mr.Bossman075@gmail.com> + +description: + Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory + for common binding part and usage. + +properties: + compatible: + const: fsl,imxrt1050-iomuxc + + reg: + maxItems: 1 + +# Client device subnode's properties +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg + mux_val input_val> are specified using a PIN_FUNC_ID macro, which can + be found in <include/dt-bindings/pinctrl/pins-imxrt1050.h>. The last + integer CONFIG is the pad setting value like pull-up on this pin. Please + refer to i.MXRT1050 Reference Manual for detailed CONFIG settings. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. + + required: + - fsl,pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + iomuxc: iomuxc@401f8000 { + compatible = "fsl,imxrt1050-iomuxc"; + reg = <0x401f8000 0x4000>; + + pinctrl_lpuart1: lpuart1grp { + fsl,pins = + <0x0EC 0x2DC 0x000 0x2 0x0 0xf1>, + <0x0F0 0x2E0 0x000 0x2 0x0 0xf1>; + }; + }; -- 2.34.0
WARNING: multiple messages have this Message-ID (diff)
From: Jesse Taube <mr.bossman075@gmail.com> To: linux-imx@nxp.com Cc: mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, ulf.hansson@linaro.org, aisheng.dong@nxp.com, stefan@agner.ch, linus.walleij@linaro.org, gregkh@linuxfoundation.org, arnd@arndb.de, olof@lixom.net, soc@kernel.org, linux@armlinux.org.uk, abel.vesa@nxp.com, adrian.hunter@intel.com, jirislaby@kernel.org, giulio.benetti@benettiengineering.com, nobuhiro1.iwamatsu@toshiba.co.jp, Mr.Bossman075@gmail.com, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org, linux-gpio@vger.kernel.org, linux-serial@vger.kernel.org, Jesse Taube <mr.bossman075@gmail.com> Subject: [PATCH v3 02/13] dt-bindings: pinctrl: add i.MXRT1050 pinctrl binding doc Date: Thu, 25 Nov 2021 16:14:32 -0500 [thread overview] Message-ID: <20211125211443.1150135-3-Mr.Bossman075@gmail.com> (raw) In-Reply-To: <20211125211443.1150135-1-Mr.Bossman075@gmail.com> From: Jesse Taube <mr.bossman075@gmail.com> Add i.MXRT1050 pinctrl binding doc Cc: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> --- V1->V2: * Replace macros with values * Add tab for last pinctrl value V2->V3: * Remove imxrt1050-evk container * Remove unnecessary handles * 2 space tabs to 4 --- .../bindings/pinctrl/fsl,imxrt1050.yaml | 79 +++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml new file mode 100644 index 000000000000..1278f7293560 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,imxrt1050.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale IMXRT1050 IOMUX Controller + +maintainers: + - Giulio Benetti <giulio.benetti@benettiengineering.com> + - Jesse Taube <Mr.Bossman075@gmail.com> + +description: + Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory + for common binding part and usage. + +properties: + compatible: + const: fsl,imxrt1050-iomuxc + + reg: + maxItems: 1 + +# Client device subnode's properties +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg + mux_val input_val> are specified using a PIN_FUNC_ID macro, which can + be found in <include/dt-bindings/pinctrl/pins-imxrt1050.h>. The last + integer CONFIG is the pad setting value like pull-up on this pin. Please + refer to i.MXRT1050 Reference Manual for detailed CONFIG settings. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. + + required: + - fsl,pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + iomuxc: iomuxc@401f8000 { + compatible = "fsl,imxrt1050-iomuxc"; + reg = <0x401f8000 0x4000>; + + pinctrl_lpuart1: lpuart1grp { + fsl,pins = + <0x0EC 0x2DC 0x000 0x2 0x0 0xf1>, + <0x0F0 0x2E0 0x000 0x2 0x0 0xf1>; + }; + }; -- 2.34.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-11-25 21:17 UTC|newest] Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-11-25 21:14 [PATCH v3 00/13] add initial support for the i.MXRTxxxx SoC family starting from i.IMXRT1050 SoC Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-25 21:14 ` [PATCH v3 01/13] ARM: imx: add initial support for i.MXRT10xx family Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-25 21:14 ` Jesse Taube [this message] 2021-11-25 21:14 ` [PATCH v3 02/13] dt-bindings: pinctrl: add i.MXRT1050 pinctrl binding doc Jesse Taube 2021-11-29 1:04 ` Rob Herring 2021-11-29 1:04 ` Rob Herring 2021-12-02 1:28 ` Linus Walleij 2021-12-02 1:28 ` Linus Walleij 2021-11-25 21:14 ` [PATCH v3 03/13] ARM: dts: imxrt1050-pinfunc: Add pinctrl binding header Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-29 1:06 ` Rob Herring 2021-11-29 1:06 ` Rob Herring 2021-12-02 1:31 ` Linus Walleij 2021-12-02 1:31 ` Linus Walleij 2021-11-25 21:14 ` [PATCH v3 04/13] pinctrl: freescale: Add i.MXRT1050 pinctrl driver support Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-27 1:43 ` Linus Walleij 2021-11-27 1:43 ` Linus Walleij 2021-11-27 2:24 ` Giulio Benetti 2021-11-27 12:48 ` Fabio Estevam 2021-11-27 12:48 ` Fabio Estevam 2021-12-02 1:31 ` Linus Walleij 2021-12-02 1:31 ` Linus Walleij 2021-11-25 21:14 ` [PATCH v3 05/13] dt-bindings: imx: Add clock binding for i.MXRT1050 Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-28 16:28 ` Rob Herring 2021-11-28 16:28 ` Rob Herring 2021-11-25 21:14 ` [PATCH v3 06/13] dt-bindings: clock: imx: Add documentation for i.MXRT clock Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-28 16:32 ` Rob Herring 2021-11-28 16:32 ` Rob Herring 2021-11-25 21:14 ` [PATCH v3 07/13] clk: imx: Add initial support for i.MXRT clock driver Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-28 20:50 ` Fabio Estevam 2021-11-28 20:50 ` Fabio Estevam 2021-11-28 20:52 ` Jesse Taube 2021-11-28 20:52 ` Jesse Taube 2021-11-28 20:54 ` Fabio Estevam 2021-11-28 20:54 ` Fabio Estevam 2021-11-28 20:59 ` Jesse Taube 2021-11-28 20:59 ` Jesse Taube 2021-11-28 21:01 ` Fabio Estevam 2021-11-28 21:01 ` Fabio Estevam 2021-11-28 22:17 ` Giulio Benetti 2021-11-28 22:17 ` Giulio Benetti 2021-11-25 21:14 ` [PATCH v3 08/13] dt-bindings: serial: fsl-lpuart: add i.MXRT compatible Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-28 16:31 ` Rob Herring 2021-11-28 16:31 ` Rob Herring 2021-11-25 21:14 ` [PATCH v3 09/13] tty: serial: fsl_lpuart: add i.MXRT support Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-28 20:47 ` Fabio Estevam 2021-11-28 20:47 ` Fabio Estevam 2021-11-25 21:14 ` [PATCH v3 10/13] dt-bindings: mmc: fsl-imx-esdhc: add i.MXRT compatible string Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-28 16:32 ` Rob Herring 2021-11-28 16:32 ` Rob Herring 2021-11-30 15:41 ` Ulf Hansson 2021-11-30 15:41 ` Ulf Hansson 2021-11-25 21:14 ` [PATCH v3 11/13] mmc: sdhci-esdhc-imx: Add sdhc support for i.MXRT series Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-28 20:51 ` Fabio Estevam 2021-11-28 20:51 ` Fabio Estevam 2021-11-30 15:41 ` Ulf Hansson 2021-11-30 15:41 ` Ulf Hansson 2021-11-25 21:14 ` [PATCH v3 12/13] ARM: dts: imx: add i.MXRT1050-EVK support Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-28 16:43 ` Rob Herring 2021-11-28 16:43 ` Rob Herring 2021-11-28 17:00 ` Jesse Taube 2021-11-28 17:00 ` Jesse Taube 2021-12-03 0:20 ` Giulio Benetti 2021-12-03 0:20 ` Giulio Benetti 2021-12-03 1:04 ` Giulio Benetti 2021-11-25 21:14 ` [PATCH v3 13/13] ARM: imxrt_defconfig: add i.MXRT family defconfig Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-25 21:42 ` Arnd Bergmann 2021-11-25 21:42 ` Arnd Bergmann 2021-11-25 22:19 ` Jesse Taube 2021-11-25 22:19 ` Jesse Taube 2021-11-29 1:21 ` Giulio Benetti 2021-11-29 1:21 ` Giulio Benetti 2021-11-29 1:54 ` Jesse Taube 2021-11-29 1:54 ` Jesse Taube
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20211125211443.1150135-3-Mr.Bossman075@gmail.com \ --to=mr.bossman075@gmail.com \ --cc=abel.vesa@nxp.com \ --cc=adrian.hunter@intel.com \ --cc=aisheng.dong@nxp.com \ --cc=arnd@arndb.de \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=giulio.benetti@benettiengineering.com \ --cc=gregkh@linuxfoundation.org \ --cc=jirislaby@kernel.org \ --cc=kernel@pengutronix.de \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mmc@vger.kernel.org \ --cc=linux-serial@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=mturquette@baylibre.com \ --cc=nobuhiro1.iwamatsu@toshiba.co.jp \ --cc=olof@lixom.net \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=sboyd@kernel.org \ --cc=shawnguo@kernel.org \ --cc=soc@kernel.org \ --cc=stefan@agner.ch \ --cc=ulf.hansson@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.