From: Corentin Labbe <clabbe@baylibre.com> To: arnd@arndb.de, linus.walleij@linaro.org, olof@lixom.net, robh+dt@kernel.org, soc@kernel.org, ulli.kroll@googlemail.com Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Corentin Labbe <clabbe@baylibre.com> Subject: [PATCH 1/5] ARM: dts: gemini: add labels for USB, IDE, flash and ethernet Date: Mon, 17 May 2021 19:32:01 +0000 [thread overview] Message-ID: <20210517193205.691147-2-clabbe@baylibre.com> (raw) In-Reply-To: <20210517193205.691147-1-clabbe@baylibre.com> Adding label will help simplify boards's dts. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> --- arch/arm/boot/dts/gemini.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi index 065ed10a79fa..6e043869d495 100644 --- a/arch/arm/boot/dts/gemini.dtsi +++ b/arch/arm/boot/dts/gemini.dtsi @@ -16,7 +16,7 @@ soc { compatible = "simple-bus"; interrupt-parent = <&intcon>; - flash@30000000 { + flash: flash@30000000 { compatible = "cortina,gemini-flash", "cfi-flash"; syscon = <&syscon>; pinctrl-names = "default"; @@ -321,7 +321,7 @@ pci_intc: interrupt-controller { }; }; - ethernet@60000000 { + ethernet: ethernet@60000000 { compatible = "cortina,gemini-ethernet"; reg = <0x60000000 0x4000>, /* Global registers, queue */ <0x60004000 0x2000>, /* V-bit */ @@ -356,7 +356,7 @@ gmac1: ethernet-port@1 { }; }; - ide@63000000 { + ide0: ide@63000000 { compatible = "cortina,gemini-pata", "faraday,ftide010"; reg = <0x63000000 0x1000>; interrupts = <4 IRQ_TYPE_EDGE_RISING>; @@ -369,7 +369,7 @@ ide@63000000 { #size-cells = <0>; }; - ide@63400000 { + ide1: ide@63400000 { compatible = "cortina,gemini-pata", "faraday,ftide010"; reg = <0x63400000 0x1000>; interrupts = <5 IRQ_TYPE_EDGE_RISING>; @@ -414,7 +414,7 @@ display-controller@6a000000 { status = "disabled"; }; - usb@68000000 { + usb0: usb@68000000 { compatible = "cortina,gemini-usb", "faraday,fotg210"; reg = <0x68000000 0x1000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; @@ -435,7 +435,7 @@ usb@68000000 { status = "disabled"; }; - usb@69000000 { + usb1: usb@69000000 { compatible = "cortina,gemini-usb", "faraday,fotg210"; reg = <0x69000000 0x1000>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; -- 2.26.3
WARNING: multiple messages have this Message-ID (diff)
From: Corentin Labbe <clabbe@baylibre.com> To: arnd@arndb.de, linus.walleij@linaro.org, olof@lixom.net, robh+dt@kernel.org, soc@kernel.org, ulli.kroll@googlemail.com Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Corentin Labbe <clabbe@baylibre.com> Subject: [PATCH 1/5] ARM: dts: gemini: add labels for USB, IDE, flash and ethernet Date: Mon, 17 May 2021 19:32:01 +0000 [thread overview] Message-ID: <20210517193205.691147-2-clabbe@baylibre.com> (raw) Message-ID: <20210517193201.J7N2s-NsrhH-cVeE5VyT6ni-J-i8few8JEC918c6bRg@z> (raw) In-Reply-To: <20210517193205.691147-1-clabbe@baylibre.com> Adding label will help simplify boards's dts. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> --- arch/arm/boot/dts/gemini.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi index 065ed10a79fa..6e043869d495 100644 --- a/arch/arm/boot/dts/gemini.dtsi +++ b/arch/arm/boot/dts/gemini.dtsi @@ -16,7 +16,7 @@ soc { compatible = "simple-bus"; interrupt-parent = <&intcon>; - flash@30000000 { + flash: flash@30000000 { compatible = "cortina,gemini-flash", "cfi-flash"; syscon = <&syscon>; pinctrl-names = "default"; @@ -321,7 +321,7 @@ pci_intc: interrupt-controller { }; }; - ethernet@60000000 { + ethernet: ethernet@60000000 { compatible = "cortina,gemini-ethernet"; reg = <0x60000000 0x4000>, /* Global registers, queue */ <0x60004000 0x2000>, /* V-bit */ @@ -356,7 +356,7 @@ gmac1: ethernet-port@1 { }; }; - ide@63000000 { + ide0: ide@63000000 { compatible = "cortina,gemini-pata", "faraday,ftide010"; reg = <0x63000000 0x1000>; interrupts = <4 IRQ_TYPE_EDGE_RISING>; @@ -369,7 +369,7 @@ ide@63000000 { #size-cells = <0>; }; - ide@63400000 { + ide1: ide@63400000 { compatible = "cortina,gemini-pata", "faraday,ftide010"; reg = <0x63400000 0x1000>; interrupts = <5 IRQ_TYPE_EDGE_RISING>; @@ -414,7 +414,7 @@ display-controller@6a000000 { status = "disabled"; }; - usb@68000000 { + usb0: usb@68000000 { compatible = "cortina,gemini-usb", "faraday,fotg210"; reg = <0x68000000 0x1000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; @@ -435,7 +435,7 @@ usb@68000000 { status = "disabled"; }; - usb@69000000 { + usb1: usb@69000000 { compatible = "cortina,gemini-usb", "faraday,fotg210"; reg = <0x69000000 0x1000>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; -- 2.26.3 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-05-17 19:32 UTC|newest] Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-05-17 19:32 [PATCH 0/5] ARM: gemini: add two more board Corentin Labbe 2021-05-17 19:32 ` Corentin Labbe 2021-05-17 19:32 ` Corentin Labbe [this message] 2021-05-17 19:32 ` [PATCH 1/5] ARM: dts: gemini: add labels for USB, IDE, flash and ethernet Corentin Labbe 2021-05-17 19:32 ` [PATCH 2/5] dt-bindings: add vendor prefix for edimax Corentin Labbe 2021-05-17 19:32 ` Corentin Labbe 2021-05-19 19:50 ` Rob Herring 2021-05-19 19:50 ` Rob Herring 2021-05-17 19:32 ` [PATCH 3/5] dt-bindings: add vendor prefix for ssi Corentin Labbe 2021-05-17 19:32 ` Corentin Labbe 2021-05-19 19:50 ` Rob Herring 2021-05-19 19:50 ` Rob Herring 2021-05-17 19:32 ` [PATCH 4/5] ARM: gemini: add device tree for edimax NS2502 Corentin Labbe 2021-05-17 19:32 ` Corentin Labbe 2021-05-17 23:46 ` Linus Walleij 2021-05-17 23:46 ` Linus Walleij 2021-05-17 23:46 ` Linus Walleij 2021-05-18 9:54 ` LABBE Corentin 2021-05-18 9:54 ` LABBE Corentin 2021-05-18 9:54 ` LABBE Corentin 2021-05-18 23:17 ` Linus Walleij 2021-05-18 23:17 ` Linus Walleij 2021-05-18 23:17 ` Linus Walleij 2021-05-20 13:02 ` LABBE Corentin 2021-05-20 13:02 ` LABBE Corentin 2021-05-20 13:02 ` LABBE Corentin 2021-05-17 19:32 ` [PATCH 5/5] ARM: gemini: add device tree for ssi1328 Corentin Labbe 2021-05-17 19:32 ` Corentin Labbe 2021-05-17 23:47 ` Linus Walleij 2021-05-17 23:47 ` Linus Walleij 2021-05-17 23:47 ` Linus Walleij
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210517193205.691147-2-clabbe@baylibre.com \ --to=clabbe@baylibre.com \ --cc=arnd@arndb.de \ --cc=devicetree@vger.kernel.org \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=olof@lixom.net \ --cc=robh+dt@kernel.org \ --cc=soc@kernel.org \ --cc=ulli.kroll@googlemail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).