From: "Marek Behún" <kabel@kernel.org>
To: Stefan Roese <sr@denx.de>
Cc: u-boot@lists.denx.de, "Pali Rohár" <pali@kernel.org>,
"Marek Behún" <marek.behun@nic.cz>
Subject: [PATCH u-boot-marvell 04/10] pci: pci_mvebu: Replace MBUS_PCI_*_SIZE by resource_size()
Date: Thu, 11 Nov 2021 16:35:43 +0100 [thread overview]
Message-ID: <20211111153549.29111-5-kabel@kernel.org> (raw)
In-Reply-To: <20211111153549.29111-1-kabel@kernel.org>
From: Pali Rohár <pali@kernel.org>
Use more appropriate resource_size() function when working with data in
struct resource.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
---
drivers/pci/pci_mvebu.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/pci/pci_mvebu.c b/drivers/pci/pci_mvebu.c
index 97c7b5604f..fde52ec99d 100644
--- a/drivers/pci/pci_mvebu.c
+++ b/drivers/pci/pci_mvebu.c
@@ -477,9 +477,9 @@ static int mvebu_pcie_probe(struct udevice *dev)
if (mvebu_mbus_add_window_by_id(pcie->mem_target, pcie->mem_attr,
(phys_addr_t)pcie->mem.start,
- MBUS_PCI_MEM_SIZE)) {
+ resource_size(&pcie->mem))) {
printf("PCIe unable to add mbus window for mem at %08x+%08x\n",
- (u32)pcie->mem.start, MBUS_PCI_MEM_SIZE);
+ (u32)pcie->mem.start, (unsigned)resource_size(&pcie->mem));
}
pcie->io.start = (u32)mvebu_pcie_iobase;
@@ -488,9 +488,9 @@ static int mvebu_pcie_probe(struct udevice *dev)
if (mvebu_mbus_add_window_by_id(pcie->io_target, pcie->io_attr,
(phys_addr_t)pcie->io.start,
- MBUS_PCI_IO_SIZE)) {
+ resource_size(&pcie->io))) {
printf("PCIe unable to add mbus window for IO at %08x+%08x\n",
- (u32)pcie->io.start, MBUS_PCI_IO_SIZE);
+ (u32)pcie->io.start, (unsigned)resource_size(&pcie->io));
}
/* Setup windows and configure host bridge */
@@ -498,13 +498,13 @@ static int mvebu_pcie_probe(struct udevice *dev)
/* PCI memory space */
pci_set_region(hose->regions + 0, pcie->mem.start,
- pcie->mem.start, MBUS_PCI_MEM_SIZE, PCI_REGION_MEM);
+ pcie->mem.start, resource_size(&pcie->mem), PCI_REGION_MEM);
pci_set_region(hose->regions + 1,
0, 0,
gd->ram_size,
PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
pci_set_region(hose->regions + 2, pcie->io.start,
- pcie->io.start, MBUS_PCI_IO_SIZE, PCI_REGION_IO);
+ pcie->io.start, resource_size(&pcie->io), PCI_REGION_IO);
hose->region_count = 3;
/* PCI Bridge support 32-bit I/O and 64-bit prefetch mem addressing */
--
2.32.0
next prev parent reply other threads:[~2021-11-11 15:37 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-11 15:35 [PATCH u-boot-marvell 00/10] PCI mvebu and aardvark changes Marek Behún
2021-11-11 15:35 ` [PATCH u-boot-marvell 01/10] pci: pci_mvebu: Wait 100ms for Link Up in mvebu_pcie_probe() Marek Behún
2021-11-12 13:59 ` Stefan Roese
2021-11-12 15:44 ` Pali Rohár
2021-11-12 16:07 ` Stefan Roese
2021-11-18 18:06 ` Pali Rohár
2021-11-11 15:35 ` [PATCH u-boot-marvell 02/10] arm: mvebu: a38x: serdes: Move non-serdes PCIe code to pci_mvebu.c Marek Behún
2021-11-12 14:01 ` Stefan Roese
2021-11-18 18:01 ` Pali Rohár
2021-11-19 6:55 ` Stefan Roese
2021-11-23 15:59 ` Pali Rohár
2021-11-29 7:46 ` Stefan Roese
2021-11-29 9:06 ` Pali Rohár
2021-11-29 9:22 ` Stefan Roese
2021-11-29 11:47 ` Pali Rohár
2021-11-29 12:30 ` Stefan Roese
2021-11-29 13:27 ` Pali Rohár
2021-11-29 14:28 ` Pali Rohár
2021-11-29 16:07 ` Stefan Roese
2021-11-29 17:09 ` Marek Behún
2021-12-10 11:07 ` Pali Rohár
2021-12-10 14:23 ` Pali Rohár
2021-12-13 7:36 ` Stefan Roese
2021-12-13 10:28 ` Pali Rohár
2021-11-11 15:35 ` [PATCH u-boot-marvell 03/10] pci: pci_mvebu: Move setup for BAR[0] where other BARs are setup Marek Behún
2021-11-12 14:02 ` Stefan Roese
2021-12-21 8:22 ` Stefan Roese
2021-11-11 15:35 ` Marek Behún [this message]
2021-11-12 14:03 ` [PATCH u-boot-marvell 04/10] pci: pci_mvebu: Replace MBUS_PCI_*_SIZE by resource_size() Stefan Roese
2021-12-21 8:23 ` Stefan Roese
2021-11-11 15:35 ` [PATCH u-boot-marvell 05/10] pci: pci_mvebu, pci_aardvark: Fix size of configuration cache Marek Behún
2021-11-12 14:04 ` Stefan Roese
2021-12-15 10:57 ` Stefan Roese
2021-11-11 15:35 ` [PATCH u-boot-marvell 06/10] pci: pci_mvebu: Do not allow setting ROM BAR on PCI Bridge Marek Behún
2021-11-12 14:05 ` Stefan Roese
2021-12-15 10:57 ` Stefan Roese
2021-11-11 15:35 ` [PATCH u-boot-marvell 07/10] pci: pci_mvebu: Fix PCIe MEM and IO resources assignment and mbus mapping Marek Behún
2021-11-12 14:18 ` Stefan Roese
2021-11-18 17:46 ` Pali Rohár
2021-11-19 6:27 ` Stefan Roese
2021-11-11 15:35 ` [PATCH u-boot-marvell 08/10] pci: pci_mvebu: Remove unused DECLARE_GLOBAL_DATA_PTR Marek Behún
2021-11-12 14:19 ` Stefan Roese
2021-12-21 8:23 ` Stefan Roese
2021-11-11 15:35 ` [PATCH u-boot-marvell 09/10] arm: a37xx: pci: Do not allow setting ROM BAR on PCI Bridge Marek Behún
2021-11-12 14:19 ` Stefan Roese
2021-11-11 15:35 ` [PATCH u-boot-marvell 10/10] arm: mvebu: turris_mox: Remove extra newline after module topology Marek Behún
2021-11-12 14:20 ` Stefan Roese
2021-12-21 8:23 ` Stefan Roese
2021-12-12 11:23 ` [PATCH u-boot-marvell 00/10] PCI mvebu and aardvark changes Pali Rohár
2021-12-13 7:41 ` Stefan Roese
2021-12-13 10:27 ` Pali Rohár
2021-12-15 8:10 ` Stefan Roese
2021-12-16 10:28 ` Pali Rohár
2021-12-18 13:53 ` Stefan Roese
2021-12-20 13:30 ` Pali Rohár
2021-12-21 8:19 ` Stefan Roese
2021-12-21 10:57 ` Pali Rohár
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211111153549.29111-5-kabel@kernel.org \
--to=kabel@kernel.org \
--cc=marek.behun@nic.cz \
--cc=pali@kernel.org \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).