Xen-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Chao Gao <chao.gao@intel.com>
To: xen-devel@lists.xenproject.org
Cc: "Ashok Raj" <ashok.raj@intel.com>, "Wei Liu" <wl@xen.org>,
	"Andrew Cooper" <andrew.cooper3@citrix.com>,
	"Jan Beulich" <jbeulich@suse.com>,
	"Chao Gao" <chao.gao@intel.com>,
	"Roger Pau Monné" <roger.pau@citrix.com>
Subject: [Xen-devel] [PATCH v9 03/15] microcode/amd: distinguish old and mismatched ucode in microcode_fits()
Date: Mon, 19 Aug 2019 09:25:16 +0800
Message-ID: <1566177928-19114-4-git-send-email-chao.gao@intel.com> (raw)
In-Reply-To: <1566177928-19114-1-git-send-email-chao.gao@intel.com>

Sometimes, an ucode with a level lower than or equal to current CPU's
patch level is useful. For example, to work around a broken bios which
only loads ucode for BSP, when BSP parses an ucode blob during bootup,
it is better to save an ucode with lower or equal level for APs

No functional change is made in this patch. But following patch would
handle "old ucode" and "mismatched ucode" separately.

Signed-off-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
---
Changes in v8:
 - new
---
 xen/arch/x86/microcode_amd.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/xen/arch/x86/microcode_amd.c b/xen/arch/x86/microcode_amd.c
index 3069784..3db3555 100644
--- a/xen/arch/x86/microcode_amd.c
+++ b/xen/arch/x86/microcode_amd.c
@@ -152,8 +152,8 @@ static bool_t find_equiv_cpu_id(const struct equiv_cpu_entry *equiv_cpu_table,
     return 0;
 }
 
-static bool_t microcode_fits(const struct microcode_amd *mc_amd,
-                             unsigned int cpu)
+static enum microcode_match_result microcode_fits(
+    const struct microcode_amd *mc_amd, unsigned int cpu)
 {
     struct ucode_cpu_info *uci = &per_cpu(ucode_cpu_info, cpu);
     const struct microcode_header_amd *mc_header = mc_amd->mpb;
@@ -167,27 +167,27 @@ static bool_t microcode_fits(const struct microcode_amd *mc_amd,
     current_cpu_id = cpuid_eax(0x00000001);
 
     if ( !find_equiv_cpu_id(equiv_cpu_table, current_cpu_id, &equiv_cpu_id) )
-        return 0;
+        return MIS_UCODE;
 
     if ( (mc_header->processor_rev_id) != equiv_cpu_id )
-        return 0;
+        return MIS_UCODE;
 
     if ( !verify_patch_size(mc_amd->mpb_size) )
     {
         pr_debug("microcode: patch size mismatch\n");
-        return 0;
+        return MIS_UCODE;
     }
 
     if ( mc_header->patch_id <= uci->cpu_sig.rev )
     {
         pr_debug("microcode: patch is already at required level or greater.\n");
-        return 0;
+        return OLD_UCODE;
     }
 
     pr_debug("microcode: CPU%d found a matching microcode update with version %#x (current=%#x)\n",
              cpu, mc_header->patch_id, uci->cpu_sig.rev);
 
-    return 1;
+    return NEW_UCODE;
 }
 
 static int apply_microcode(unsigned int cpu)
@@ -496,7 +496,7 @@ static int cpu_request_microcode(unsigned int cpu, const void *buf,
     while ( (error = get_ucode_from_buffer_amd(mc_amd, buf, bufsize,
                                                &offset)) == 0 )
     {
-        if ( microcode_fits(mc_amd, cpu) )
+        if ( microcode_fits(mc_amd, cpu) == NEW_UCODE )
         {
             error = apply_microcode(cpu);
             if ( error )
@@ -576,7 +576,7 @@ static int microcode_resume_match(unsigned int cpu, const void *mc)
     struct microcode_amd *mc_amd = uci->mc.mc_amd;
     const struct microcode_amd *src = mc;
 
-    if ( !microcode_fits(src, cpu) )
+    if ( microcode_fits(src, cpu) != NEW_UCODE )
         return 0;
 
     if ( src != mc_amd )
-- 
1.8.3.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

  parent reply index

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-19  1:25 [Xen-devel] [PATCH v9 00/15] improve late microcode loading Chao Gao
2019-08-19  1:25 ` [Xen-devel] [PATCH v9 01/15] microcode/intel: extend microcode_update_match() Chao Gao
2019-08-28 15:12   ` Jan Beulich
2019-08-29  7:15     ` Chao Gao
2019-08-29  7:14       ` Jan Beulich
2019-08-19  1:25 ` [Xen-devel] [PATCH v9 02/15] microcode/amd: fix memory leak Chao Gao
2019-08-19  1:25 ` Chao Gao [this message]
2019-08-19  1:25 ` [Xen-devel] [PATCH v9 04/15] microcode: introduce a global cache of ucode patch Chao Gao
2019-08-22 11:11   ` Roger Pau Monné
2019-08-28 15:21   ` Jan Beulich
2019-08-29 10:18   ` Jan Beulich
2019-08-19  1:25 ` [Xen-devel] [PATCH v9 05/15] microcode: clean up microcode_resume_cpu Chao Gao
2019-08-19  1:25 ` [Xen-devel] [PATCH v9 06/15] microcode: remove struct ucode_cpu_info Chao Gao
2019-08-19  1:25 ` [Xen-devel] [PATCH v9 07/15] microcode: remove pointless 'cpu' parameter Chao Gao
2019-08-19  1:25 ` [Xen-devel] [PATCH v9 08/15] microcode/amd: call svm_host_osvw_init() in common code Chao Gao
2019-08-22 13:08   ` Roger Pau Monné
2019-08-28 15:26   ` Jan Beulich
2019-08-19  1:25 ` [Xen-devel] [PATCH v9 09/15] microcode: pass a patch pointer to apply_microcode() Chao Gao
2019-08-19  1:25 ` [Xen-devel] [PATCH v9 10/15] microcode: split out apply_microcode() from cpu_request_microcode() Chao Gao
2019-08-22 13:59   ` Roger Pau Monné
2019-08-29 10:06     ` Jan Beulich
2019-08-30  3:22       ` Chao Gao
2019-08-30  7:25         ` Jan Beulich
2019-08-29 10:19   ` Jan Beulich
2019-08-19  1:25 ` [Xen-devel] [PATCH v9 11/15] microcode: unify loading update during CPU resuming and AP wakeup Chao Gao
2019-08-22 14:10   ` Roger Pau Monné
2019-08-22 16:44     ` Chao Gao
2019-08-23  9:09       ` Roger Pau Monné
2019-08-29  7:37         ` Chao Gao
2019-08-29  8:16           ` Roger Pau Monné
2019-08-29 10:26           ` Jan Beulich
2019-08-29 10:29   ` Jan Beulich
2019-08-19  1:25 ` [Xen-devel] [PATCH v9 12/15] microcode: reduce memory allocation and copy when creating a patch Chao Gao
2019-08-23  8:11   ` Roger Pau Monné
2019-08-26  7:03     ` Chao Gao
2019-08-26  8:11       ` Roger Pau Monné
2019-08-29 10:47   ` Jan Beulich
2019-08-19  1:25 ` [Xen-devel] [PATCH v9 13/15] x86/microcode: Synchronize late microcode loading Chao Gao
2019-08-19 10:27   ` Sergey Dyasli
2019-08-19 14:49     ` Chao Gao
2019-08-29 12:06   ` Jan Beulich
2019-08-30  3:30     ` Chao Gao
2019-08-19  1:25 ` [Xen-devel] [PATCH v9 14/15] microcode: remove microcode_update_lock Chao Gao
2019-08-19  1:25 ` [Xen-devel] [PATCH v9 15/15] microcode: block #NMI handling when loading an ucode Chao Gao
2019-08-23  8:46   ` Sergey Dyasli
2019-08-26  8:07     ` Chao Gao
2019-08-27  4:52       ` Chao Gao
2019-08-28  8:52         ` Sergey Dyasli
2019-08-29 12:11         ` Jan Beulich
2019-08-30  6:35           ` Chao Gao
2019-09-09  5:52             ` Chao Gao
2019-09-09  6:16               ` Jan Beulich
2019-08-29 12:22   ` Jan Beulich
2019-08-30  6:33     ` Chao Gao
2019-08-30  7:30       ` Jan Beulich
2019-08-22  7:51 ` [Xen-devel] [PATCH v9 00/15] improve late microcode loading Sergey Dyasli
2019-08-22 15:39   ` Chao Gao

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1566177928-19114-4-git-send-email-chao.gao@intel.com \
    --to=chao.gao@intel.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=ashok.raj@intel.com \
    --cc=jbeulich@suse.com \
    --cc=roger.pau@citrix.com \
    --cc=wl@xen.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Xen-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/xen-devel/0 xen-devel/git/0.git
	git clone --mirror https://lore.kernel.org/xen-devel/1 xen-devel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 xen-devel xen-devel/ https://lore.kernel.org/xen-devel \
		xen-devel@lists.xenproject.org xen-devel@lists.xen.org xen-devel@archiver.kernel.org
	public-inbox-index xen-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.xenproject.lists.xen-devel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox