From: Mark Langsdorf <mark.langsdorf@calxeda.com> To: linux-kernel@vger.kernel.org, cpufreq@vger.kernel.org, linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: Mark Langsdorf <mark.langsdorf@calxeda.com>, Rob Herring <rob.herring@calxeda.com>, mturquette@linaro.org Subject: [PATCH 2/6 v8] clk, highbank: Prevent glitches in non-bypass reset mode Date: Wed, 5 Dec 2012 10:48:37 -0600 [thread overview] Message-ID: <1354726121-17190-3-git-send-email-mark.langsdorf@calxeda.com> (raw) In-Reply-To: <1354726121-17190-1-git-send-email-mark.langsdorf@calxeda.com> The highbank clock will glitch with the current code if the clock rate is reset without relocking the PLL. Program the PLL correctly to prevent glitches. Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: mturquette@linaro.org --- Changes from v6, v7 None. Changes from v5 Added Mike Turquette's ack. Changes from v4 None. Changes from v3 Changelog text and patch name now correspond to the actual patch. was clk, highbank: remove non-bypass reset mode. Changes from v2 None. Changes from v1 Removed erroneous reformating. drivers/clk/clk-highbank.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/clk/clk-highbank.c b/drivers/clk/clk-highbank.c index 52fecad..3a0b723 100644 --- a/drivers/clk/clk-highbank.c +++ b/drivers/clk/clk-highbank.c @@ -182,8 +182,10 @@ static int clk_pll_set_rate(struct clk_hw *hwclk, unsigned long rate, reg |= HB_PLL_EXT_ENA; reg &= ~HB_PLL_EXT_BYPASS; } else { + writel(reg | HB_PLL_EXT_BYPASS, hbclk->reg); reg &= ~HB_PLL_DIVQ_MASK; reg |= divq << HB_PLL_DIVQ_SHIFT; + writel(reg | HB_PLL_EXT_BYPASS, hbclk->reg); } writel(reg, hbclk->reg); -- 1.7.11.7
WARNING: multiple messages have this Message-ID (diff)
From: mark.langsdorf@calxeda.com (Mark Langsdorf) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 2/6 v8] clk, highbank: Prevent glitches in non-bypass reset mode Date: Wed, 5 Dec 2012 10:48:37 -0600 [thread overview] Message-ID: <1354726121-17190-3-git-send-email-mark.langsdorf@calxeda.com> (raw) In-Reply-To: <1354726121-17190-1-git-send-email-mark.langsdorf@calxeda.com> The highbank clock will glitch with the current code if the clock rate is reset without relocking the PLL. Program the PLL correctly to prevent glitches. Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: mturquette at linaro.org --- Changes from v6, v7 None. Changes from v5 Added Mike Turquette's ack. Changes from v4 None. Changes from v3 Changelog text and patch name now correspond to the actual patch. was clk, highbank: remove non-bypass reset mode. Changes from v2 None. Changes from v1 Removed erroneous reformating. drivers/clk/clk-highbank.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/clk/clk-highbank.c b/drivers/clk/clk-highbank.c index 52fecad..3a0b723 100644 --- a/drivers/clk/clk-highbank.c +++ b/drivers/clk/clk-highbank.c @@ -182,8 +182,10 @@ static int clk_pll_set_rate(struct clk_hw *hwclk, unsigned long rate, reg |= HB_PLL_EXT_ENA; reg &= ~HB_PLL_EXT_BYPASS; } else { + writel(reg | HB_PLL_EXT_BYPASS, hbclk->reg); reg &= ~HB_PLL_DIVQ_MASK; reg |= divq << HB_PLL_DIVQ_SHIFT; + writel(reg | HB_PLL_EXT_BYPASS, hbclk->reg); } writel(reg, hbclk->reg); -- 1.7.11.7
next prev parent reply other threads:[~2012-12-05 16:48 UTC|newest] Thread overview: 269+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-10-30 21:04 [PATCH 0/6] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf 2012-10-30 21:04 ` [PATCH 1/6] arm: use devicetree to get smp_twd clock Mark Langsdorf 2012-10-30 21:04 ` Mark Langsdorf 2012-10-30 21:04 ` [PATCH 2/6] clk, highbank: remove non-bypass reset mode Mark Langsdorf 2012-10-30 21:04 ` [PATCH 3/6] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf 2012-10-30 21:04 ` [PATCH 4/6] arm highbank: add support for pl320 IPC Mark Langsdorf 2012-10-30 21:04 ` [PATCH 5/6] power: export opp cpufreq functions Mark Langsdorf 2012-10-31 1:17 ` Nishanth Menon 2012-10-31 1:17 ` Nishanth Menon 2012-10-30 21:04 ` [PATCH 6/6] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf 2012-10-31 0:21 ` [PATCH 0/6] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki [not found] ` <1351685025-26698-1-git-send-email-mark.langsdorf@calxeda.com> 2012-10-31 12:03 ` [PATCH 1/6] arm: use devicetree to get smp_twd clock Mark Langsdorf 2012-10-31 12:03 ` [PATCH 3/6] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf 2012-11-01 2:14 ` MyungJoo Ham 2012-11-02 18:51 ` [PATCH 0/6 v2] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf 2012-11-02 18:51 ` [PATCH 1/6 v2] arm: use devicetree to get smp_twd clock Mark Langsdorf 2012-11-02 18:51 ` Mark Langsdorf 2012-11-02 18:51 ` Mark Langsdorf 2012-11-04 10:08 ` Russell King - ARM Linux 2012-11-04 10:08 ` Russell King - ARM Linux 2012-11-05 22:28 ` Mark Langsdorf 2012-11-05 22:28 ` Mark Langsdorf 2012-11-05 22:31 ` Russell King - ARM Linux 2012-11-05 22:31 ` Russell King - ARM Linux 2012-11-05 22:49 ` Mark Langsdorf 2012-11-05 22:49 ` Mark Langsdorf 2012-11-02 18:51 ` [PATCH 2/6 v2] clk, highbank: remove non-bypass reset mode Mark Langsdorf 2012-11-02 18:51 ` [PATCH 3/6 v2] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf 2012-11-02 18:51 ` [PATCH 4/6 v2] arm highbank: add support for pl320 IPC Mark Langsdorf 2012-11-02 18:51 ` [PATCH 5/6 v2] power: export opp cpufreq functions Mark Langsdorf 2012-11-02 18:51 ` [PATCH 6/6 v2] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf 2012-11-02 21:45 ` [PATCH 0/6 v2] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki 2012-11-06 20:18 ` [PATCH 0/6 v3] " Mark Langsdorf 2012-11-06 20:18 ` [PATCH 1/6 v3] arm: use devicetree to get smp_twd clock Mark Langsdorf 2012-11-06 20:18 ` [PATCH 2/6 v3] clk, highbank: remove non-bypass reset mode Mark Langsdorf 2012-11-06 20:18 ` [PATCH 3/6 v3] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf 2012-11-06 20:18 ` [PATCH 4/6 v3] arm highbank: add support for pl320 IPC Mark Langsdorf 2012-11-06 20:18 ` [PATCH 5/6 v3] power: export opp cpufreq functions Mark Langsdorf 2012-11-06 20:18 ` [PATCH 6/6 v3] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf 2012-11-07 18:11 ` [PATCH 0/6 v3] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf 2012-11-07 18:32 ` [PATCH 0/6 v4] " Mark Langsdorf 2012-11-07 18:32 ` [PATCH 1/6 v4] arm: use devicetree to get smp_twd clock Mark Langsdorf 2012-11-07 18:32 ` [PATCH 2/6 v4] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf 2012-11-12 21:24 ` Mike Turquette 2012-11-12 21:24 ` Mike Turquette 2012-11-12 21:35 ` Mark Langsdorf 2012-11-07 18:32 ` [PATCH 3/6 v4] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf 2012-11-11 16:38 ` Borislav Petkov 2012-11-12 16:35 ` Mark Langsdorf 2012-11-13 16:24 ` Borislav Petkov 2012-11-13 16:33 ` Mark Langsdorf 2012-11-13 19:13 ` Mark Langsdorf 2012-11-17 14:50 ` Borislav Petkov 2012-11-24 10:05 ` Rafael J. Wysocki 2012-11-26 13:57 ` Mark Langsdorf 2012-11-26 15:25 ` Rafael J. Wysocki 2012-11-07 18:32 ` [PATCH 4/6 v4] arm highbank: add support for pl320 IPC Mark Langsdorf 2012-11-14 14:03 ` Rob Herring 2012-11-07 18:32 ` [PATCH 5/6 v4] power: export opp cpufreq functions Mark Langsdorf 2012-11-07 18:32 ` [PATCH 6/6 v4] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf 2012-11-07 18:32 ` Mark Langsdorf 2012-11-07 18:51 ` Rob Herring 2012-11-07 18:51 ` Rob Herring 2012-11-24 10:07 ` [PATCH 0/6 v4] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki 2012-11-27 15:04 ` [PATCH 0/6 v5] " Mark Langsdorf 2012-11-27 15:04 ` Mark Langsdorf 2012-11-27 15:04 ` [PATCH 1/6 v5] arm: use devicetree to get smp_twd clock Mark Langsdorf 2012-11-27 15:04 ` Mark Langsdorf 2012-11-27 15:04 ` [PATCH 2/6 v5] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf 2012-11-27 15:04 ` Mark Langsdorf 2012-11-27 18:15 ` Mike Turquette 2012-11-27 18:15 ` Mike Turquette 2012-11-27 15:04 ` [PATCH 3/6 v5] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf 2012-11-27 15:04 ` Mark Langsdorf 2012-11-27 15:04 ` [PATCH 4/6 v5] arm highbank: add support for pl320 IPC Mark Langsdorf 2012-11-27 15:04 ` Mark Langsdorf 2012-11-27 16:12 ` Thomas Petazzoni 2012-11-27 16:12 ` Thomas Petazzoni 2012-11-27 19:53 ` Mark Langsdorf 2012-11-27 19:53 ` Mark Langsdorf 2012-11-27 19:53 ` Mark Langsdorf [not found] ` <1354602789308-564771.post@n7.nabble.com> 2013-01-29 2:26 ` liuhuan123 2013-02-06 5:43 ` liuhuan123 2013-02-21 5:11 ` liuhuan123 2013-03-21 4:01 ` liuhuan123 2013-03-12 5:29 ` liuhuan123 2012-11-27 15:04 ` [PATCH 5/6 v5] power: export opp cpufreq functions Mark Langsdorf 2012-11-27 15:04 ` Mark Langsdorf 2012-11-27 15:04 ` [PATCH 6/6 v5] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf 2012-11-27 15:04 ` Mark Langsdorf 2012-11-27 15:04 ` Mark Langsdorf 2012-11-27 19:04 ` [PATCH 0/6 v5] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki 2012-11-27 19:04 ` Rafael J. Wysocki 2012-11-27 20:04 ` [PATCH 0/6 v6] " Mark Langsdorf 2012-11-27 20:04 ` Mark Langsdorf 2012-11-27 20:04 ` [PATCH 1/6 v6] arm: use devicetree to get smp_twd clock Mark Langsdorf 2012-11-27 20:04 ` Mark Langsdorf 2012-11-27 20:04 ` [PATCH 2/6 v6] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf 2012-11-27 20:04 ` Mark Langsdorf 2012-11-27 20:04 ` [PATCH 3/6 v6] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf 2012-11-27 20:04 ` Mark Langsdorf 2012-11-27 20:04 ` [PATCH 4/6 v6] arm highbank: add support for pl320 IPC Mark Langsdorf 2012-11-27 20:04 ` Mark Langsdorf 2012-11-27 20:04 ` Mark Langsdorf 2012-11-27 20:04 ` [PATCH 5/6 v6] power: export opp cpufreq functions Mark Langsdorf 2012-11-27 20:04 ` Mark Langsdorf 2012-11-27 20:04 ` [PATCH 6/6 v6] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf 2012-11-27 20:04 ` Mark Langsdorf 2012-11-27 20:04 ` Mark Langsdorf 2012-11-28 2:32 ` Shawn Guo 2012-11-28 2:32 ` Shawn Guo 2012-11-28 2:32 ` Shawn Guo 2012-11-28 13:16 ` Mark Langsdorf 2012-11-28 13:16 ` Mark Langsdorf 2012-11-28 13:16 ` Mark Langsdorf 2012-11-28 14:58 ` Shawn Guo 2012-11-28 14:58 ` Shawn Guo 2012-11-28 14:58 ` Shawn Guo 2012-11-28 15:17 ` Shawn Guo 2012-11-28 15:17 ` Shawn Guo 2012-11-28 15:17 ` Shawn Guo 2012-11-28 15:01 ` Mark Langsdorf 2012-11-28 15:01 ` Mark Langsdorf 2012-11-28 15:01 ` Mark Langsdorf 2012-11-28 16:01 ` Mike Turquette 2012-11-28 16:01 ` Mike Turquette 2012-11-28 16:01 ` Mike Turquette 2012-11-28 16:18 ` Mark Langsdorf 2012-11-28 16:18 ` Mark Langsdorf 2012-11-28 16:18 ` Mark Langsdorf 2012-11-28 21:05 ` Mike Turquette 2012-11-28 21:05 ` Mike Turquette 2012-11-28 21:05 ` Mike Turquette 2012-11-29 0:24 ` Mark Langsdorf 2012-11-29 0:24 ` Mark Langsdorf 2012-11-29 0:24 ` Mark Langsdorf 2012-11-29 1:51 ` Shawn Guo 2012-11-29 1:51 ` Shawn Guo 2012-11-29 1:51 ` Shawn Guo 2012-11-29 4:34 ` Mike Turquette 2012-11-29 4:34 ` Mike Turquette 2012-11-29 4:34 ` Mike Turquette 2012-12-04 14:33 ` [PATCH 0/6 v7] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf 2012-12-04 14:33 ` Mark Langsdorf 2012-12-04 14:33 ` [PATCH 1/6 v7] arm: use devicetree to get smp_twd clock Mark Langsdorf 2012-12-04 14:33 ` Mark Langsdorf 2012-12-04 14:33 ` [PATCH 2/6 v7] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf 2012-12-04 14:33 ` Mark Langsdorf 2012-12-04 14:33 ` [PATCH 3/6 v7] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf 2012-12-04 14:33 ` Mark Langsdorf 2012-12-04 14:34 ` [PATCH 4/6 v7] arm highbank: add support for pl320 IPC Mark Langsdorf 2012-12-04 14:34 ` Mark Langsdorf 2012-12-04 14:34 ` Mark Langsdorf 2012-12-04 14:34 ` [PATCH 5/6 v7] power: export opp cpufreq functions Mark Langsdorf 2012-12-04 14:34 ` Mark Langsdorf 2012-12-04 14:34 ` [PATCH 6/6 v7] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf 2012-12-04 14:34 ` Mark Langsdorf 2012-12-04 16:21 ` Shawn Guo 2012-12-04 16:21 ` Shawn Guo 2012-12-04 16:21 ` Shawn Guo 2012-12-05 16:48 ` [PATCH 0/6 v8] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf 2012-12-05 16:48 ` Mark Langsdorf 2012-12-05 16:48 ` [PATCH 1/6 v8] arm: use devicetree to get smp_twd clock Mark Langsdorf 2012-12-05 16:48 ` Mark Langsdorf 2012-12-05 16:48 ` Mark Langsdorf [this message] 2012-12-05 16:48 ` [PATCH 2/6 v8] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf 2012-12-05 18:02 ` Mike Turquette 2012-12-05 18:02 ` Mike Turquette 2012-12-05 16:48 ` [PATCH 3/6 v8] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf 2012-12-05 16:48 ` Mark Langsdorf 2012-12-05 16:48 ` [PATCH 4/6 v8] arm highbank: add support for pl320 IPC Mark Langsdorf 2012-12-05 16:48 ` Mark Langsdorf 2012-12-05 16:48 ` [PATCH 5/6 v8] power: export opp cpufreq functions Mark Langsdorf 2012-12-05 16:48 ` Mark Langsdorf 2012-12-05 16:48 ` [PATCH 6/6 v8] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf 2012-12-05 16:48 ` Mark Langsdorf 2012-12-05 18:49 ` Mike Turquette 2012-12-05 18:49 ` Mike Turquette 2012-12-05 22:09 ` Mark Langsdorf 2012-12-05 22:09 ` Mark Langsdorf 2012-12-05 22:09 ` Mark Langsdorf 2012-12-06 9:37 ` Shawn Guo 2012-12-06 9:37 ` Shawn Guo 2012-12-06 9:37 ` Shawn Guo 2012-12-27 13:12 ` [PATCH 0/6 v8] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki 2012-12-27 13:12 ` Rafael J. Wysocki 2012-12-27 13:28 ` Mark Langsdorf 2012-12-27 13:28 ` Mark Langsdorf 2012-12-27 13:28 ` Mark Langsdorf 2012-12-27 14:43 ` Rafael J. Wysocki 2012-12-27 14:43 ` Rafael J. Wysocki 2012-12-27 14:43 ` Rafael J. Wysocki 2012-12-06 22:42 ` [PATCH 0/6 v9] " Mark Langsdorf 2012-12-06 22:42 ` Mark Langsdorf 2012-12-06 22:42 ` [PATCH 1/6 v9] arm: use devicetree to get smp_twd clock Mark Langsdorf 2012-12-06 22:42 ` Mark Langsdorf 2012-12-07 14:55 ` Thiago Farina 2012-12-07 14:55 ` Thiago Farina 2012-12-27 5:11 ` Prashant Gaikwad 2012-12-27 5:11 ` Prashant Gaikwad 2012-12-27 5:11 ` Prashant Gaikwad 2012-12-06 22:42 ` [PATCH 2/6 v9] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf 2012-12-06 22:42 ` Mark Langsdorf 2012-12-06 22:42 ` [PATCH 3/6 v9] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf 2012-12-06 22:42 ` Mark Langsdorf 2012-12-06 22:42 ` [PATCH 4/6 v9] arm highbank: add support for pl320 IPC Mark Langsdorf 2012-12-06 22:42 ` Mark Langsdorf 2012-12-06 22:42 ` [PATCH 5/6 v9] power: export opp cpufreq functions Mark Langsdorf 2012-12-06 22:42 ` Mark Langsdorf 2012-12-06 22:42 ` [PATCH 6/6 v9] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf 2012-12-06 22:42 ` Mark Langsdorf 2012-12-07 7:04 ` Mike Turquette 2012-12-07 7:04 ` Mike Turquette 2013-01-04 16:35 ` [PATCH 0/4 v10] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf 2013-01-04 16:35 ` Mark Langsdorf 2013-01-04 16:35 ` [PATCH 1/4 v10] arm: use devicetree to get smp_twd clock Mark Langsdorf 2013-01-04 16:35 ` Mark Langsdorf 2013-01-10 23:34 ` Russell King - ARM Linux 2013-01-10 23:34 ` Russell King - ARM Linux 2013-01-11 14:40 ` Rob Herring 2013-01-11 14:40 ` Rob Herring 2013-01-04 16:35 ` [PATCH 2/4 v10] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf 2013-01-04 16:35 ` Mark Langsdorf 2013-01-04 16:35 ` [PATCH 3/4 v10] arm highbank: add support for pl320 IPC Mark Langsdorf 2013-01-04 16:35 ` Mark Langsdorf 2013-01-04 16:35 ` [PATCH 4/4 v10] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf 2013-01-04 16:35 ` Mark Langsdorf 2013-01-25 19:46 ` [PATCH 0/4 v11] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf 2013-01-25 19:46 ` Mark Langsdorf 2013-01-25 19:46 ` [PATCH 1/4 v11] arm: use device tree to get smp_twd clock Mark Langsdorf 2013-01-25 19:46 ` Mark Langsdorf 2013-01-25 21:03 ` Rafael J. Wysocki 2013-01-25 21:03 ` Rafael J. Wysocki 2013-01-25 21:40 ` Russell King - ARM Linux 2013-01-25 21:40 ` Russell King - ARM Linux 2013-01-25 22:15 ` Rafael J. Wysocki 2013-01-25 22:15 ` Rafael J. Wysocki 2013-01-25 19:46 ` [PATCH 2/4 v11] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf 2013-01-25 19:46 ` Mark Langsdorf 2013-01-25 19:46 ` [PATCH 3/4 v11] arm highbank: add support for pl320 IPC Mark Langsdorf 2013-01-25 19:46 ` Mark Langsdorf 2013-01-28 12:49 ` Rafael J. Wysocki 2013-01-28 12:49 ` Rafael J. Wysocki 2013-01-28 13:44 ` Mark Langsdorf 2013-01-28 13:44 ` Mark Langsdorf 2013-01-28 13:44 ` Mark Langsdorf 2013-01-28 20:48 ` Rafael J. Wysocki 2013-01-28 20:48 ` Rafael J. Wysocki 2013-01-28 20:48 ` Rafael J. Wysocki 2013-01-25 19:46 ` [PATCH 4/4] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf 2013-01-25 19:46 ` Mark Langsdorf 2013-01-26 14:39 ` Shawn Guo 2013-01-26 14:39 ` Shawn Guo 2013-01-26 14:39 ` Shawn Guo 2013-01-26 22:24 ` Rafael J. Wysocki 2013-01-26 22:24 ` Rafael J. Wysocki 2013-01-28 8:37 ` Shawn Guo 2013-01-28 8:37 ` Shawn Guo 2013-01-28 8:37 ` Shawn Guo 2013-01-28 16:13 ` [PATCH 0/4 v12] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf 2013-01-28 16:13 ` Mark Langsdorf 2013-01-28 16:13 ` [PATCH 1/4 v12] arm: use device tree to get smp_twd clock Mark Langsdorf 2013-01-28 16:13 ` Mark Langsdorf 2013-01-28 16:13 ` [PATCH 2/4 v12] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf 2013-01-28 16:13 ` Mark Langsdorf 2013-01-28 16:13 ` [PATCH 3/4 v12] arm highbank: add support for pl320 IPC Mark Langsdorf 2013-01-28 16:13 ` Mark Langsdorf 2013-01-28 16:13 ` [PATCH 4/4 v12] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf 2013-01-28 16:13 ` Mark Langsdorf
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1354726121-17190-3-git-send-email-mark.langsdorf@calxeda.com \ --to=mark.langsdorf@calxeda.com \ --cc=cpufreq@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=mturquette@linaro.org \ --cc=rob.herring@calxeda.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.