From: Shawn Guo <shawn.guo@linaro.org>
To: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Mark Langsdorf <mark.langsdorf@calxeda.com>,
<linux-kernel@vger.kernel.org>, <cpufreq@vger.kernel.org>,
<linux-pm@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 4/4] cpufreq, highbank: add support for highbank cpufreq
Date: Mon, 28 Jan 2013 16:37:18 +0800 [thread overview]
Message-ID: <20130128083716.GE31689@S2101-09.ap.freescale.net> (raw)
In-Reply-To: <1523559.2KevGvelzH@vostro.rjw.lan>
Rafael,
On Sat, Jan 26, 2013 at 11:24:12PM +0100, Rafael J. Wysocki wrote:
> > As we are moving to multiplatform build, this init function will run
> > on all other platforms built together with highbank. We should
> > probably eliminate that effect.
>
> That change can be made on top of the Mark's patches I think, right?
>
Yes.
> If so, I'd prefer it that way. The Mark's patches have been in a limbo for
> too long already and that issue doesn't seem to be serious enough to block
> them any longer.
>
Ok, I will take care of the changes needed on highbank. Do you have
a branch with Mark's series and the EXPORT_SYMBOL() one applied,
so that I can start my patch from there.
Shawn
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawn.guo@linaro.org>
To: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: linux-arm-kernel@lists.infradead.org, cpufreq@vger.kernel.org,
linux-kernel@vger.kernel.org,
Mark Langsdorf <mark.langsdorf@calxeda.com>,
linux-pm@vger.kernel.org
Subject: Re: [PATCH 4/4] cpufreq, highbank: add support for highbank cpufreq
Date: Mon, 28 Jan 2013 16:37:18 +0800 [thread overview]
Message-ID: <20130128083716.GE31689@S2101-09.ap.freescale.net> (raw)
In-Reply-To: <1523559.2KevGvelzH@vostro.rjw.lan>
Rafael,
On Sat, Jan 26, 2013 at 11:24:12PM +0100, Rafael J. Wysocki wrote:
> > As we are moving to multiplatform build, this init function will run
> > on all other platforms built together with highbank. We should
> > probably eliminate that effect.
>
> That change can be made on top of the Mark's patches I think, right?
>
Yes.
> If so, I'd prefer it that way. The Mark's patches have been in a limbo for
> too long already and that issue doesn't seem to be serious enough to block
> them any longer.
>
Ok, I will take care of the changes needed on highbank. Do you have
a branch with Mark's series and the EXPORT_SYMBOL() one applied,
so that I can start my patch from there.
Shawn
WARNING: multiple messages have this Message-ID (diff)
From: shawn.guo@linaro.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] cpufreq, highbank: add support for highbank cpufreq
Date: Mon, 28 Jan 2013 16:37:18 +0800 [thread overview]
Message-ID: <20130128083716.GE31689@S2101-09.ap.freescale.net> (raw)
In-Reply-To: <1523559.2KevGvelzH@vostro.rjw.lan>
Rafael,
On Sat, Jan 26, 2013 at 11:24:12PM +0100, Rafael J. Wysocki wrote:
> > As we are moving to multiplatform build, this init function will run
> > on all other platforms built together with highbank. We should
> > probably eliminate that effect.
>
> That change can be made on top of the Mark's patches I think, right?
>
Yes.
> If so, I'd prefer it that way. The Mark's patches have been in a limbo for
> too long already and that issue doesn't seem to be serious enough to block
> them any longer.
>
Ok, I will take care of the changes needed on highbank. Do you have
a branch with Mark's series and the EXPORT_SYMBOL() one applied,
so that I can start my patch from there.
Shawn
next prev parent reply other threads:[~2013-01-28 8:38 UTC|newest]
Thread overview: 269+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-30 21:04 [PATCH 0/6] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf
2012-10-30 21:04 ` [PATCH 1/6] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-10-30 21:04 ` Mark Langsdorf
2012-10-30 21:04 ` [PATCH 2/6] clk, highbank: remove non-bypass reset mode Mark Langsdorf
2012-10-30 21:04 ` [PATCH 3/6] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-10-30 21:04 ` [PATCH 4/6] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-10-30 21:04 ` [PATCH 5/6] power: export opp cpufreq functions Mark Langsdorf
2012-10-31 1:17 ` Nishanth Menon
2012-10-31 1:17 ` Nishanth Menon
2012-10-30 21:04 ` [PATCH 6/6] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-10-31 0:21 ` [PATCH 0/6] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki
[not found] ` <1351685025-26698-1-git-send-email-mark.langsdorf@calxeda.com>
2012-10-31 12:03 ` [PATCH 1/6] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-10-31 12:03 ` [PATCH 3/6] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-11-01 2:14 ` MyungJoo Ham
2012-11-02 18:51 ` [PATCH 0/6 v2] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf
2012-11-02 18:51 ` [PATCH 1/6 v2] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-11-02 18:51 ` Mark Langsdorf
2012-11-02 18:51 ` Mark Langsdorf
2012-11-04 10:08 ` Russell King - ARM Linux
2012-11-04 10:08 ` Russell King - ARM Linux
2012-11-05 22:28 ` Mark Langsdorf
2012-11-05 22:28 ` Mark Langsdorf
2012-11-05 22:31 ` Russell King - ARM Linux
2012-11-05 22:31 ` Russell King - ARM Linux
2012-11-05 22:49 ` Mark Langsdorf
2012-11-05 22:49 ` Mark Langsdorf
2012-11-02 18:51 ` [PATCH 2/6 v2] clk, highbank: remove non-bypass reset mode Mark Langsdorf
2012-11-02 18:51 ` [PATCH 3/6 v2] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-11-02 18:51 ` [PATCH 4/6 v2] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-11-02 18:51 ` [PATCH 5/6 v2] power: export opp cpufreq functions Mark Langsdorf
2012-11-02 18:51 ` [PATCH 6/6 v2] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-11-02 21:45 ` [PATCH 0/6 v2] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki
2012-11-06 20:18 ` [PATCH 0/6 v3] " Mark Langsdorf
2012-11-06 20:18 ` [PATCH 1/6 v3] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-11-06 20:18 ` [PATCH 2/6 v3] clk, highbank: remove non-bypass reset mode Mark Langsdorf
2012-11-06 20:18 ` [PATCH 3/6 v3] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-11-06 20:18 ` [PATCH 4/6 v3] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-11-06 20:18 ` [PATCH 5/6 v3] power: export opp cpufreq functions Mark Langsdorf
2012-11-06 20:18 ` [PATCH 6/6 v3] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-11-07 18:11 ` [PATCH 0/6 v3] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf
2012-11-07 18:32 ` [PATCH 0/6 v4] " Mark Langsdorf
2012-11-07 18:32 ` [PATCH 1/6 v4] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-11-07 18:32 ` [PATCH 2/6 v4] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2012-11-12 21:24 ` Mike Turquette
2012-11-12 21:24 ` Mike Turquette
2012-11-12 21:35 ` Mark Langsdorf
2012-11-07 18:32 ` [PATCH 3/6 v4] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-11-11 16:38 ` Borislav Petkov
2012-11-12 16:35 ` Mark Langsdorf
2012-11-13 16:24 ` Borislav Petkov
2012-11-13 16:33 ` Mark Langsdorf
2012-11-13 19:13 ` Mark Langsdorf
2012-11-17 14:50 ` Borislav Petkov
2012-11-24 10:05 ` Rafael J. Wysocki
2012-11-26 13:57 ` Mark Langsdorf
2012-11-26 15:25 ` Rafael J. Wysocki
2012-11-07 18:32 ` [PATCH 4/6 v4] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-11-14 14:03 ` Rob Herring
2012-11-07 18:32 ` [PATCH 5/6 v4] power: export opp cpufreq functions Mark Langsdorf
2012-11-07 18:32 ` [PATCH 6/6 v4] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-11-07 18:32 ` Mark Langsdorf
2012-11-07 18:51 ` Rob Herring
2012-11-07 18:51 ` Rob Herring
2012-11-24 10:07 ` [PATCH 0/6 v4] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki
2012-11-27 15:04 ` [PATCH 0/6 v5] " Mark Langsdorf
2012-11-27 15:04 ` Mark Langsdorf
2012-11-27 15:04 ` [PATCH 1/6 v5] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-11-27 15:04 ` Mark Langsdorf
2012-11-27 15:04 ` [PATCH 2/6 v5] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2012-11-27 15:04 ` Mark Langsdorf
2012-11-27 18:15 ` Mike Turquette
2012-11-27 18:15 ` Mike Turquette
2012-11-27 15:04 ` [PATCH 3/6 v5] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-11-27 15:04 ` Mark Langsdorf
2012-11-27 15:04 ` [PATCH 4/6 v5] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-11-27 15:04 ` Mark Langsdorf
2012-11-27 16:12 ` Thomas Petazzoni
2012-11-27 16:12 ` Thomas Petazzoni
2012-11-27 19:53 ` Mark Langsdorf
2012-11-27 19:53 ` Mark Langsdorf
2012-11-27 19:53 ` Mark Langsdorf
[not found] ` <1354602789308-564771.post@n7.nabble.com>
2013-01-29 2:26 ` liuhuan123
2013-02-06 5:43 ` liuhuan123
2013-02-21 5:11 ` liuhuan123
2013-03-21 4:01 ` liuhuan123
2013-03-12 5:29 ` liuhuan123
2012-11-27 15:04 ` [PATCH 5/6 v5] power: export opp cpufreq functions Mark Langsdorf
2012-11-27 15:04 ` Mark Langsdorf
2012-11-27 15:04 ` [PATCH 6/6 v5] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-11-27 15:04 ` Mark Langsdorf
2012-11-27 15:04 ` Mark Langsdorf
2012-11-27 19:04 ` [PATCH 0/6 v5] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki
2012-11-27 19:04 ` Rafael J. Wysocki
2012-11-27 20:04 ` [PATCH 0/6 v6] " Mark Langsdorf
2012-11-27 20:04 ` Mark Langsdorf
2012-11-27 20:04 ` [PATCH 1/6 v6] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-11-27 20:04 ` Mark Langsdorf
2012-11-27 20:04 ` [PATCH 2/6 v6] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2012-11-27 20:04 ` Mark Langsdorf
2012-11-27 20:04 ` [PATCH 3/6 v6] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-11-27 20:04 ` Mark Langsdorf
2012-11-27 20:04 ` [PATCH 4/6 v6] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-11-27 20:04 ` Mark Langsdorf
2012-11-27 20:04 ` Mark Langsdorf
2012-11-27 20:04 ` [PATCH 5/6 v6] power: export opp cpufreq functions Mark Langsdorf
2012-11-27 20:04 ` Mark Langsdorf
2012-11-27 20:04 ` [PATCH 6/6 v6] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-11-27 20:04 ` Mark Langsdorf
2012-11-27 20:04 ` Mark Langsdorf
2012-11-28 2:32 ` Shawn Guo
2012-11-28 2:32 ` Shawn Guo
2012-11-28 2:32 ` Shawn Guo
2012-11-28 13:16 ` Mark Langsdorf
2012-11-28 13:16 ` Mark Langsdorf
2012-11-28 13:16 ` Mark Langsdorf
2012-11-28 14:58 ` Shawn Guo
2012-11-28 14:58 ` Shawn Guo
2012-11-28 14:58 ` Shawn Guo
2012-11-28 15:17 ` Shawn Guo
2012-11-28 15:17 ` Shawn Guo
2012-11-28 15:17 ` Shawn Guo
2012-11-28 15:01 ` Mark Langsdorf
2012-11-28 15:01 ` Mark Langsdorf
2012-11-28 15:01 ` Mark Langsdorf
2012-11-28 16:01 ` Mike Turquette
2012-11-28 16:01 ` Mike Turquette
2012-11-28 16:01 ` Mike Turquette
2012-11-28 16:18 ` Mark Langsdorf
2012-11-28 16:18 ` Mark Langsdorf
2012-11-28 16:18 ` Mark Langsdorf
2012-11-28 21:05 ` Mike Turquette
2012-11-28 21:05 ` Mike Turquette
2012-11-28 21:05 ` Mike Turquette
2012-11-29 0:24 ` Mark Langsdorf
2012-11-29 0:24 ` Mark Langsdorf
2012-11-29 0:24 ` Mark Langsdorf
2012-11-29 1:51 ` Shawn Guo
2012-11-29 1:51 ` Shawn Guo
2012-11-29 1:51 ` Shawn Guo
2012-11-29 4:34 ` Mike Turquette
2012-11-29 4:34 ` Mike Turquette
2012-11-29 4:34 ` Mike Turquette
2012-12-04 14:33 ` [PATCH 0/6 v7] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf
2012-12-04 14:33 ` Mark Langsdorf
2012-12-04 14:33 ` [PATCH 1/6 v7] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-12-04 14:33 ` Mark Langsdorf
2012-12-04 14:33 ` [PATCH 2/6 v7] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2012-12-04 14:33 ` Mark Langsdorf
2012-12-04 14:33 ` [PATCH 3/6 v7] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-12-04 14:33 ` Mark Langsdorf
2012-12-04 14:34 ` [PATCH 4/6 v7] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-12-04 14:34 ` Mark Langsdorf
2012-12-04 14:34 ` Mark Langsdorf
2012-12-04 14:34 ` [PATCH 5/6 v7] power: export opp cpufreq functions Mark Langsdorf
2012-12-04 14:34 ` Mark Langsdorf
2012-12-04 14:34 ` [PATCH 6/6 v7] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-12-04 14:34 ` Mark Langsdorf
2012-12-04 16:21 ` Shawn Guo
2012-12-04 16:21 ` Shawn Guo
2012-12-04 16:21 ` Shawn Guo
2012-12-05 16:48 ` [PATCH 0/6 v8] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf
2012-12-05 16:48 ` Mark Langsdorf
2012-12-05 16:48 ` [PATCH 1/6 v8] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-12-05 16:48 ` Mark Langsdorf
2012-12-05 16:48 ` [PATCH 2/6 v8] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2012-12-05 16:48 ` Mark Langsdorf
2012-12-05 18:02 ` Mike Turquette
2012-12-05 18:02 ` Mike Turquette
2012-12-05 16:48 ` [PATCH 3/6 v8] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-12-05 16:48 ` Mark Langsdorf
2012-12-05 16:48 ` [PATCH 4/6 v8] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-12-05 16:48 ` Mark Langsdorf
2012-12-05 16:48 ` [PATCH 5/6 v8] power: export opp cpufreq functions Mark Langsdorf
2012-12-05 16:48 ` Mark Langsdorf
2012-12-05 16:48 ` [PATCH 6/6 v8] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-12-05 16:48 ` Mark Langsdorf
2012-12-05 18:49 ` Mike Turquette
2012-12-05 18:49 ` Mike Turquette
2012-12-05 22:09 ` Mark Langsdorf
2012-12-05 22:09 ` Mark Langsdorf
2012-12-05 22:09 ` Mark Langsdorf
2012-12-06 9:37 ` Shawn Guo
2012-12-06 9:37 ` Shawn Guo
2012-12-06 9:37 ` Shawn Guo
2012-12-27 13:12 ` [PATCH 0/6 v8] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki
2012-12-27 13:12 ` Rafael J. Wysocki
2012-12-27 13:28 ` Mark Langsdorf
2012-12-27 13:28 ` Mark Langsdorf
2012-12-27 13:28 ` Mark Langsdorf
2012-12-27 14:43 ` Rafael J. Wysocki
2012-12-27 14:43 ` Rafael J. Wysocki
2012-12-27 14:43 ` Rafael J. Wysocki
2012-12-06 22:42 ` [PATCH 0/6 v9] " Mark Langsdorf
2012-12-06 22:42 ` Mark Langsdorf
2012-12-06 22:42 ` [PATCH 1/6 v9] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-12-06 22:42 ` Mark Langsdorf
2012-12-07 14:55 ` Thiago Farina
2012-12-07 14:55 ` Thiago Farina
2012-12-27 5:11 ` Prashant Gaikwad
2012-12-27 5:11 ` Prashant Gaikwad
2012-12-27 5:11 ` Prashant Gaikwad
2012-12-06 22:42 ` [PATCH 2/6 v9] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2012-12-06 22:42 ` Mark Langsdorf
2012-12-06 22:42 ` [PATCH 3/6 v9] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-12-06 22:42 ` Mark Langsdorf
2012-12-06 22:42 ` [PATCH 4/6 v9] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-12-06 22:42 ` Mark Langsdorf
2012-12-06 22:42 ` [PATCH 5/6 v9] power: export opp cpufreq functions Mark Langsdorf
2012-12-06 22:42 ` Mark Langsdorf
2012-12-06 22:42 ` [PATCH 6/6 v9] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-12-06 22:42 ` Mark Langsdorf
2012-12-07 7:04 ` Mike Turquette
2012-12-07 7:04 ` Mike Turquette
2013-01-04 16:35 ` [PATCH 0/4 v10] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf
2013-01-04 16:35 ` Mark Langsdorf
2013-01-04 16:35 ` [PATCH 1/4 v10] arm: use devicetree to get smp_twd clock Mark Langsdorf
2013-01-04 16:35 ` Mark Langsdorf
2013-01-10 23:34 ` Russell King - ARM Linux
2013-01-10 23:34 ` Russell King - ARM Linux
2013-01-11 14:40 ` Rob Herring
2013-01-11 14:40 ` Rob Herring
2013-01-04 16:35 ` [PATCH 2/4 v10] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2013-01-04 16:35 ` Mark Langsdorf
2013-01-04 16:35 ` [PATCH 3/4 v10] arm highbank: add support for pl320 IPC Mark Langsdorf
2013-01-04 16:35 ` Mark Langsdorf
2013-01-04 16:35 ` [PATCH 4/4 v10] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2013-01-04 16:35 ` Mark Langsdorf
2013-01-25 19:46 ` [PATCH 0/4 v11] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf
2013-01-25 19:46 ` Mark Langsdorf
2013-01-25 19:46 ` [PATCH 1/4 v11] arm: use device tree to get smp_twd clock Mark Langsdorf
2013-01-25 19:46 ` Mark Langsdorf
2013-01-25 21:03 ` Rafael J. Wysocki
2013-01-25 21:03 ` Rafael J. Wysocki
2013-01-25 21:40 ` Russell King - ARM Linux
2013-01-25 21:40 ` Russell King - ARM Linux
2013-01-25 22:15 ` Rafael J. Wysocki
2013-01-25 22:15 ` Rafael J. Wysocki
2013-01-25 19:46 ` [PATCH 2/4 v11] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2013-01-25 19:46 ` Mark Langsdorf
2013-01-25 19:46 ` [PATCH 3/4 v11] arm highbank: add support for pl320 IPC Mark Langsdorf
2013-01-25 19:46 ` Mark Langsdorf
2013-01-28 12:49 ` Rafael J. Wysocki
2013-01-28 12:49 ` Rafael J. Wysocki
2013-01-28 13:44 ` Mark Langsdorf
2013-01-28 13:44 ` Mark Langsdorf
2013-01-28 13:44 ` Mark Langsdorf
2013-01-28 20:48 ` Rafael J. Wysocki
2013-01-28 20:48 ` Rafael J. Wysocki
2013-01-28 20:48 ` Rafael J. Wysocki
2013-01-25 19:46 ` [PATCH 4/4] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2013-01-25 19:46 ` Mark Langsdorf
2013-01-26 14:39 ` Shawn Guo
2013-01-26 14:39 ` Shawn Guo
2013-01-26 14:39 ` Shawn Guo
2013-01-26 22:24 ` Rafael J. Wysocki
2013-01-26 22:24 ` Rafael J. Wysocki
2013-01-28 8:37 ` Shawn Guo [this message]
2013-01-28 8:37 ` Shawn Guo
2013-01-28 8:37 ` Shawn Guo
2013-01-28 16:13 ` [PATCH 0/4 v12] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf
2013-01-28 16:13 ` Mark Langsdorf
2013-01-28 16:13 ` [PATCH 1/4 v12] arm: use device tree to get smp_twd clock Mark Langsdorf
2013-01-28 16:13 ` Mark Langsdorf
2013-01-28 16:13 ` [PATCH 2/4 v12] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2013-01-28 16:13 ` Mark Langsdorf
2013-01-28 16:13 ` [PATCH 3/4 v12] arm highbank: add support for pl320 IPC Mark Langsdorf
2013-01-28 16:13 ` Mark Langsdorf
2013-01-28 16:13 ` [PATCH 4/4 v12] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2013-01-28 16:13 ` Mark Langsdorf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130128083716.GE31689@S2101-09.ap.freescale.net \
--to=shawn.guo@linaro.org \
--cc=cpufreq@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.langsdorf@calxeda.com \
--cc=rjw@sisk.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.