From: Mike Turquette <mturquette@linaro.org>
To: Mark Langsdorf <mark.langsdorf@calxeda.com>,
linux-kernel@vger.kernel.org, cpufreq@vger.kernel.org,
linux-pm@vger.kernel.org
Cc: Mark Langsdorf <mark.langsdorf@calxeda.com>,
Rob Herring <rob.herring@calxeda.com>
Subject: Re: [PATCH 2/6 v4] clk, highbank: Prevent glitches in non-bypass reset mode
Date: Mon, 12 Nov 2012 13:24:12 -0800 [thread overview]
Message-ID: <20121112212412.20034.37835@nucleus> (raw)
In-Reply-To: <1352313166-28980-3-git-send-email-mark.langsdorf@calxeda.com>
Quoting Mark Langsdorf (2012-11-07 10:32:42)
> The highbank clock will glitch with the current code if the
> clock rate is reset without relocking the PLL. Program the PLL
> correctly to preven glitches.
>
> Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
> Cc: mturquette@linaro.org
Hi Mark,
Looks fine to me.
I seem to be missing the rest of this series in my mail. Did you want
me to take only this patch (2/6) into clk-next or were you only looking
for my ACK?
Regards,
Mike
> ---
> Changes from v3
> Changelog text and patch name now correspond to the actual patch
> was clk, highbank: remove non-bypass reset mode
> Changes from v2
> None
> Changes from v1:
> Removed erroneous reformating.
>
> drivers/clk/clk-highbank.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/clk/clk-highbank.c b/drivers/clk/clk-highbank.c
> index 52fecad..3a0b723 100644
> --- a/drivers/clk/clk-highbank.c
> +++ b/drivers/clk/clk-highbank.c
> @@ -182,8 +182,10 @@ static int clk_pll_set_rate(struct clk_hw *hwclk, unsigned long rate,
> reg |= HB_PLL_EXT_ENA;
> reg &= ~HB_PLL_EXT_BYPASS;
> } else {
> + writel(reg | HB_PLL_EXT_BYPASS, hbclk->reg);
> reg &= ~HB_PLL_DIVQ_MASK;
> reg |= divq << HB_PLL_DIVQ_SHIFT;
> + writel(reg | HB_PLL_EXT_BYPASS, hbclk->reg);
> }
> writel(reg, hbclk->reg);
>
> --
> 1.7.11.7
WARNING: multiple messages have this Message-ID (diff)
From: Mike Turquette <mturquette@linaro.org>
To: linux-kernel@vger.kernel.org, cpufreq@vger.kernel.org,
linux-pm@vger.kernel.org
Cc: Mark Langsdorf <mark.langsdorf@calxeda.com>,
Rob Herring <rob.herring@calxeda.com>
Subject: Re: [PATCH 2/6 v4] clk, highbank: Prevent glitches in non-bypass reset mode
Date: Mon, 12 Nov 2012 13:24:12 -0800 [thread overview]
Message-ID: <20121112212412.20034.37835@nucleus> (raw)
In-Reply-To: <1352313166-28980-3-git-send-email-mark.langsdorf@calxeda.com>
Quoting Mark Langsdorf (2012-11-07 10:32:42)
> The highbank clock will glitch with the current code if the
> clock rate is reset without relocking the PLL. Program the PLL
> correctly to preven glitches.
>
> Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
> Cc: mturquette@linaro.org
Hi Mark,
Looks fine to me.
I seem to be missing the rest of this series in my mail. Did you want
me to take only this patch (2/6) into clk-next or were you only looking
for my ACK?
Regards,
Mike
> ---
> Changes from v3
> Changelog text and patch name now correspond to the actual patch
> was clk, highbank: remove non-bypass reset mode
> Changes from v2
> None
> Changes from v1:
> Removed erroneous reformating.
>
> drivers/clk/clk-highbank.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/clk/clk-highbank.c b/drivers/clk/clk-highbank.c
> index 52fecad..3a0b723 100644
> --- a/drivers/clk/clk-highbank.c
> +++ b/drivers/clk/clk-highbank.c
> @@ -182,8 +182,10 @@ static int clk_pll_set_rate(struct clk_hw *hwclk, unsigned long rate,
> reg |= HB_PLL_EXT_ENA;
> reg &= ~HB_PLL_EXT_BYPASS;
> } else {
> + writel(reg | HB_PLL_EXT_BYPASS, hbclk->reg);
> reg &= ~HB_PLL_DIVQ_MASK;
> reg |= divq << HB_PLL_DIVQ_SHIFT;
> + writel(reg | HB_PLL_EXT_BYPASS, hbclk->reg);
> }
> writel(reg, hbclk->reg);
>
> --
> 1.7.11.7
next prev parent reply other threads:[~2012-11-12 21:24 UTC|newest]
Thread overview: 269+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-30 21:04 [PATCH 0/6] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf
2012-10-30 21:04 ` [PATCH 1/6] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-10-30 21:04 ` Mark Langsdorf
2012-10-30 21:04 ` [PATCH 2/6] clk, highbank: remove non-bypass reset mode Mark Langsdorf
2012-10-30 21:04 ` [PATCH 3/6] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-10-30 21:04 ` [PATCH 4/6] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-10-30 21:04 ` [PATCH 5/6] power: export opp cpufreq functions Mark Langsdorf
2012-10-31 1:17 ` Nishanth Menon
2012-10-31 1:17 ` Nishanth Menon
2012-10-30 21:04 ` [PATCH 6/6] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-10-31 0:21 ` [PATCH 0/6] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki
[not found] ` <1351685025-26698-1-git-send-email-mark.langsdorf@calxeda.com>
2012-10-31 12:03 ` [PATCH 1/6] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-10-31 12:03 ` [PATCH 3/6] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-11-01 2:14 ` MyungJoo Ham
2012-11-02 18:51 ` [PATCH 0/6 v2] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf
2012-11-02 18:51 ` [PATCH 1/6 v2] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-11-02 18:51 ` Mark Langsdorf
2012-11-02 18:51 ` Mark Langsdorf
2012-11-04 10:08 ` Russell King - ARM Linux
2012-11-04 10:08 ` Russell King - ARM Linux
2012-11-05 22:28 ` Mark Langsdorf
2012-11-05 22:28 ` Mark Langsdorf
2012-11-05 22:31 ` Russell King - ARM Linux
2012-11-05 22:31 ` Russell King - ARM Linux
2012-11-05 22:49 ` Mark Langsdorf
2012-11-05 22:49 ` Mark Langsdorf
2012-11-02 18:51 ` [PATCH 2/6 v2] clk, highbank: remove non-bypass reset mode Mark Langsdorf
2012-11-02 18:51 ` [PATCH 3/6 v2] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-11-02 18:51 ` [PATCH 4/6 v2] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-11-02 18:51 ` [PATCH 5/6 v2] power: export opp cpufreq functions Mark Langsdorf
2012-11-02 18:51 ` [PATCH 6/6 v2] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-11-02 21:45 ` [PATCH 0/6 v2] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki
2012-11-06 20:18 ` [PATCH 0/6 v3] " Mark Langsdorf
2012-11-06 20:18 ` [PATCH 1/6 v3] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-11-06 20:18 ` [PATCH 2/6 v3] clk, highbank: remove non-bypass reset mode Mark Langsdorf
2012-11-06 20:18 ` [PATCH 3/6 v3] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-11-06 20:18 ` [PATCH 4/6 v3] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-11-06 20:18 ` [PATCH 5/6 v3] power: export opp cpufreq functions Mark Langsdorf
2012-11-06 20:18 ` [PATCH 6/6 v3] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-11-07 18:11 ` [PATCH 0/6 v3] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf
2012-11-07 18:32 ` [PATCH 0/6 v4] " Mark Langsdorf
2012-11-07 18:32 ` [PATCH 1/6 v4] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-11-07 18:32 ` [PATCH 2/6 v4] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2012-11-12 21:24 ` Mike Turquette [this message]
2012-11-12 21:24 ` Mike Turquette
2012-11-12 21:35 ` Mark Langsdorf
2012-11-07 18:32 ` [PATCH 3/6 v4] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-11-11 16:38 ` Borislav Petkov
2012-11-12 16:35 ` Mark Langsdorf
2012-11-13 16:24 ` Borislav Petkov
2012-11-13 16:33 ` Mark Langsdorf
2012-11-13 19:13 ` Mark Langsdorf
2012-11-17 14:50 ` Borislav Petkov
2012-11-24 10:05 ` Rafael J. Wysocki
2012-11-26 13:57 ` Mark Langsdorf
2012-11-26 15:25 ` Rafael J. Wysocki
2012-11-07 18:32 ` [PATCH 4/6 v4] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-11-14 14:03 ` Rob Herring
2012-11-07 18:32 ` [PATCH 5/6 v4] power: export opp cpufreq functions Mark Langsdorf
2012-11-07 18:32 ` [PATCH 6/6 v4] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-11-07 18:32 ` Mark Langsdorf
2012-11-07 18:51 ` Rob Herring
2012-11-07 18:51 ` Rob Herring
2012-11-24 10:07 ` [PATCH 0/6 v4] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki
2012-11-27 15:04 ` [PATCH 0/6 v5] " Mark Langsdorf
2012-11-27 15:04 ` Mark Langsdorf
2012-11-27 15:04 ` [PATCH 1/6 v5] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-11-27 15:04 ` Mark Langsdorf
2012-11-27 15:04 ` [PATCH 2/6 v5] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2012-11-27 15:04 ` Mark Langsdorf
2012-11-27 18:15 ` Mike Turquette
2012-11-27 18:15 ` Mike Turquette
2012-11-27 15:04 ` [PATCH 3/6 v5] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-11-27 15:04 ` Mark Langsdorf
2012-11-27 15:04 ` [PATCH 4/6 v5] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-11-27 15:04 ` Mark Langsdorf
2012-11-27 16:12 ` Thomas Petazzoni
2012-11-27 16:12 ` Thomas Petazzoni
2012-11-27 19:53 ` Mark Langsdorf
2012-11-27 19:53 ` Mark Langsdorf
2012-11-27 19:53 ` Mark Langsdorf
[not found] ` <1354602789308-564771.post@n7.nabble.com>
2013-01-29 2:26 ` liuhuan123
2013-02-06 5:43 ` liuhuan123
2013-02-21 5:11 ` liuhuan123
2013-03-21 4:01 ` liuhuan123
2013-03-12 5:29 ` liuhuan123
2012-11-27 15:04 ` [PATCH 5/6 v5] power: export opp cpufreq functions Mark Langsdorf
2012-11-27 15:04 ` Mark Langsdorf
2012-11-27 15:04 ` [PATCH 6/6 v5] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-11-27 15:04 ` Mark Langsdorf
2012-11-27 15:04 ` Mark Langsdorf
2012-11-27 19:04 ` [PATCH 0/6 v5] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki
2012-11-27 19:04 ` Rafael J. Wysocki
2012-11-27 20:04 ` [PATCH 0/6 v6] " Mark Langsdorf
2012-11-27 20:04 ` Mark Langsdorf
2012-11-27 20:04 ` [PATCH 1/6 v6] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-11-27 20:04 ` Mark Langsdorf
2012-11-27 20:04 ` [PATCH 2/6 v6] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2012-11-27 20:04 ` Mark Langsdorf
2012-11-27 20:04 ` [PATCH 3/6 v6] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-11-27 20:04 ` Mark Langsdorf
2012-11-27 20:04 ` [PATCH 4/6 v6] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-11-27 20:04 ` Mark Langsdorf
2012-11-27 20:04 ` Mark Langsdorf
2012-11-27 20:04 ` [PATCH 5/6 v6] power: export opp cpufreq functions Mark Langsdorf
2012-11-27 20:04 ` Mark Langsdorf
2012-11-27 20:04 ` [PATCH 6/6 v6] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-11-27 20:04 ` Mark Langsdorf
2012-11-27 20:04 ` Mark Langsdorf
2012-11-28 2:32 ` Shawn Guo
2012-11-28 2:32 ` Shawn Guo
2012-11-28 2:32 ` Shawn Guo
2012-11-28 13:16 ` Mark Langsdorf
2012-11-28 13:16 ` Mark Langsdorf
2012-11-28 13:16 ` Mark Langsdorf
2012-11-28 14:58 ` Shawn Guo
2012-11-28 14:58 ` Shawn Guo
2012-11-28 14:58 ` Shawn Guo
2012-11-28 15:17 ` Shawn Guo
2012-11-28 15:17 ` Shawn Guo
2012-11-28 15:17 ` Shawn Guo
2012-11-28 15:01 ` Mark Langsdorf
2012-11-28 15:01 ` Mark Langsdorf
2012-11-28 15:01 ` Mark Langsdorf
2012-11-28 16:01 ` Mike Turquette
2012-11-28 16:01 ` Mike Turquette
2012-11-28 16:01 ` Mike Turquette
2012-11-28 16:18 ` Mark Langsdorf
2012-11-28 16:18 ` Mark Langsdorf
2012-11-28 16:18 ` Mark Langsdorf
2012-11-28 21:05 ` Mike Turquette
2012-11-28 21:05 ` Mike Turquette
2012-11-28 21:05 ` Mike Turquette
2012-11-29 0:24 ` Mark Langsdorf
2012-11-29 0:24 ` Mark Langsdorf
2012-11-29 0:24 ` Mark Langsdorf
2012-11-29 1:51 ` Shawn Guo
2012-11-29 1:51 ` Shawn Guo
2012-11-29 1:51 ` Shawn Guo
2012-11-29 4:34 ` Mike Turquette
2012-11-29 4:34 ` Mike Turquette
2012-11-29 4:34 ` Mike Turquette
2012-12-04 14:33 ` [PATCH 0/6 v7] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf
2012-12-04 14:33 ` Mark Langsdorf
2012-12-04 14:33 ` [PATCH 1/6 v7] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-12-04 14:33 ` Mark Langsdorf
2012-12-04 14:33 ` [PATCH 2/6 v7] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2012-12-04 14:33 ` Mark Langsdorf
2012-12-04 14:33 ` [PATCH 3/6 v7] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-12-04 14:33 ` Mark Langsdorf
2012-12-04 14:34 ` [PATCH 4/6 v7] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-12-04 14:34 ` Mark Langsdorf
2012-12-04 14:34 ` Mark Langsdorf
2012-12-04 14:34 ` [PATCH 5/6 v7] power: export opp cpufreq functions Mark Langsdorf
2012-12-04 14:34 ` Mark Langsdorf
2012-12-04 14:34 ` [PATCH 6/6 v7] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-12-04 14:34 ` Mark Langsdorf
2012-12-04 16:21 ` Shawn Guo
2012-12-04 16:21 ` Shawn Guo
2012-12-04 16:21 ` Shawn Guo
2012-12-05 16:48 ` [PATCH 0/6 v8] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf
2012-12-05 16:48 ` Mark Langsdorf
2012-12-05 16:48 ` [PATCH 1/6 v8] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-12-05 16:48 ` Mark Langsdorf
2012-12-05 16:48 ` [PATCH 2/6 v8] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2012-12-05 16:48 ` Mark Langsdorf
2012-12-05 18:02 ` Mike Turquette
2012-12-05 18:02 ` Mike Turquette
2012-12-05 16:48 ` [PATCH 3/6 v8] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-12-05 16:48 ` Mark Langsdorf
2012-12-05 16:48 ` [PATCH 4/6 v8] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-12-05 16:48 ` Mark Langsdorf
2012-12-05 16:48 ` [PATCH 5/6 v8] power: export opp cpufreq functions Mark Langsdorf
2012-12-05 16:48 ` Mark Langsdorf
2012-12-05 16:48 ` [PATCH 6/6 v8] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-12-05 16:48 ` Mark Langsdorf
2012-12-05 18:49 ` Mike Turquette
2012-12-05 18:49 ` Mike Turquette
2012-12-05 22:09 ` Mark Langsdorf
2012-12-05 22:09 ` Mark Langsdorf
2012-12-05 22:09 ` Mark Langsdorf
2012-12-06 9:37 ` Shawn Guo
2012-12-06 9:37 ` Shawn Guo
2012-12-06 9:37 ` Shawn Guo
2012-12-27 13:12 ` [PATCH 0/6 v8] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki
2012-12-27 13:12 ` Rafael J. Wysocki
2012-12-27 13:28 ` Mark Langsdorf
2012-12-27 13:28 ` Mark Langsdorf
2012-12-27 13:28 ` Mark Langsdorf
2012-12-27 14:43 ` Rafael J. Wysocki
2012-12-27 14:43 ` Rafael J. Wysocki
2012-12-27 14:43 ` Rafael J. Wysocki
2012-12-06 22:42 ` [PATCH 0/6 v9] " Mark Langsdorf
2012-12-06 22:42 ` Mark Langsdorf
2012-12-06 22:42 ` [PATCH 1/6 v9] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-12-06 22:42 ` Mark Langsdorf
2012-12-07 14:55 ` Thiago Farina
2012-12-07 14:55 ` Thiago Farina
2012-12-27 5:11 ` Prashant Gaikwad
2012-12-27 5:11 ` Prashant Gaikwad
2012-12-27 5:11 ` Prashant Gaikwad
2012-12-06 22:42 ` [PATCH 2/6 v9] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2012-12-06 22:42 ` Mark Langsdorf
2012-12-06 22:42 ` [PATCH 3/6 v9] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-12-06 22:42 ` Mark Langsdorf
2012-12-06 22:42 ` [PATCH 4/6 v9] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-12-06 22:42 ` Mark Langsdorf
2012-12-06 22:42 ` [PATCH 5/6 v9] power: export opp cpufreq functions Mark Langsdorf
2012-12-06 22:42 ` Mark Langsdorf
2012-12-06 22:42 ` [PATCH 6/6 v9] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-12-06 22:42 ` Mark Langsdorf
2012-12-07 7:04 ` Mike Turquette
2012-12-07 7:04 ` Mike Turquette
2013-01-04 16:35 ` [PATCH 0/4 v10] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf
2013-01-04 16:35 ` Mark Langsdorf
2013-01-04 16:35 ` [PATCH 1/4 v10] arm: use devicetree to get smp_twd clock Mark Langsdorf
2013-01-04 16:35 ` Mark Langsdorf
2013-01-10 23:34 ` Russell King - ARM Linux
2013-01-10 23:34 ` Russell King - ARM Linux
2013-01-11 14:40 ` Rob Herring
2013-01-11 14:40 ` Rob Herring
2013-01-04 16:35 ` [PATCH 2/4 v10] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2013-01-04 16:35 ` Mark Langsdorf
2013-01-04 16:35 ` [PATCH 3/4 v10] arm highbank: add support for pl320 IPC Mark Langsdorf
2013-01-04 16:35 ` Mark Langsdorf
2013-01-04 16:35 ` [PATCH 4/4 v10] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2013-01-04 16:35 ` Mark Langsdorf
2013-01-25 19:46 ` [PATCH 0/4 v11] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf
2013-01-25 19:46 ` Mark Langsdorf
2013-01-25 19:46 ` [PATCH 1/4 v11] arm: use device tree to get smp_twd clock Mark Langsdorf
2013-01-25 19:46 ` Mark Langsdorf
2013-01-25 21:03 ` Rafael J. Wysocki
2013-01-25 21:03 ` Rafael J. Wysocki
2013-01-25 21:40 ` Russell King - ARM Linux
2013-01-25 21:40 ` Russell King - ARM Linux
2013-01-25 22:15 ` Rafael J. Wysocki
2013-01-25 22:15 ` Rafael J. Wysocki
2013-01-25 19:46 ` [PATCH 2/4 v11] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2013-01-25 19:46 ` Mark Langsdorf
2013-01-25 19:46 ` [PATCH 3/4 v11] arm highbank: add support for pl320 IPC Mark Langsdorf
2013-01-25 19:46 ` Mark Langsdorf
2013-01-28 12:49 ` Rafael J. Wysocki
2013-01-28 12:49 ` Rafael J. Wysocki
2013-01-28 13:44 ` Mark Langsdorf
2013-01-28 13:44 ` Mark Langsdorf
2013-01-28 13:44 ` Mark Langsdorf
2013-01-28 20:48 ` Rafael J. Wysocki
2013-01-28 20:48 ` Rafael J. Wysocki
2013-01-28 20:48 ` Rafael J. Wysocki
2013-01-25 19:46 ` [PATCH 4/4] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2013-01-25 19:46 ` Mark Langsdorf
2013-01-26 14:39 ` Shawn Guo
2013-01-26 14:39 ` Shawn Guo
2013-01-26 14:39 ` Shawn Guo
2013-01-26 22:24 ` Rafael J. Wysocki
2013-01-26 22:24 ` Rafael J. Wysocki
2013-01-28 8:37 ` Shawn Guo
2013-01-28 8:37 ` Shawn Guo
2013-01-28 8:37 ` Shawn Guo
2013-01-28 16:13 ` [PATCH 0/4 v12] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf
2013-01-28 16:13 ` Mark Langsdorf
2013-01-28 16:13 ` [PATCH 1/4 v12] arm: use device tree to get smp_twd clock Mark Langsdorf
2013-01-28 16:13 ` Mark Langsdorf
2013-01-28 16:13 ` [PATCH 2/4 v12] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2013-01-28 16:13 ` Mark Langsdorf
2013-01-28 16:13 ` [PATCH 3/4 v12] arm highbank: add support for pl320 IPC Mark Langsdorf
2013-01-28 16:13 ` Mark Langsdorf
2013-01-28 16:13 ` [PATCH 4/4 v12] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2013-01-28 16:13 ` Mark Langsdorf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121112212412.20034.37835@nucleus \
--to=mturquette@linaro.org \
--cc=cpufreq@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.langsdorf@calxeda.com \
--cc=rob.herring@calxeda.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.