From: Mark Langsdorf <mark.langsdorf@calxeda.com> To: linux-kernel@vger.kernel.org, cpufreq@vger.kernel.org, linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: Mark Langsdorf <mark.langsdorf@calxeda.com>, shawn.guo@linaro.org, mturquette@linaro.org Subject: [PATCH 6/6 v8] cpufreq, highbank: add support for highbank cpufreq Date: Wed, 5 Dec 2012 10:48:41 -0600 [thread overview] Message-ID: <1354726121-17190-7-git-send-email-mark.langsdorf@calxeda.com> (raw) In-Reply-To: <1354726121-17190-1-git-send-email-mark.langsdorf@calxeda.com> Highbank processors depend on the external ECME to perform voltage management based on a requested frequency. Communication between the A9 cores and the ECME happens over the pl320 IPC channel. Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Cc: shawn.guo@linaro.org Cc: mturquette@linaro.org --- Changes from v7 Removed old attribution to cpufreq-cpu0. Added some description in the documentation. Made cpu_dev, cpu_clk into local variables. Removed __devinit. Removed some unneeded includes. Added a brace to clarify some nested if logic. Changes from v6 Removed devicetree bindings documentation. Restructured driver to use clk notifications. Core driver logic is now cpufreq-clk0. Changes from v5 Changed ipc_transmit() to pl320_ipc_transmit(). Changes from v4 Removed erroneous changes to arch/arm/Kconfig. Removed unnecessary changes to drivers/cpufreq/Kconfig.arm Alphabetized additions to arch/arm/mach-highbank/Kconfig Changed ipc call and header to match new ipc location in drivers/mailbox. Changes from v3 None. Changes from v2 Changed transition latency binding in code to match documentation. Changes from v1 Added highbank specific Kconfig changes. arch/arm/boot/dts/highbank.dts | 10 ++++ arch/arm/mach-highbank/Kconfig | 2 + drivers/cpufreq/Kconfig.arm | 16 ++++++ drivers/cpufreq/Makefile | 1 + drivers/cpufreq/highbank-cpufreq.c | 102 +++++++++++++++++++++++++++++++++++++ 5 files changed, 131 insertions(+) create mode 100644 drivers/cpufreq/highbank-cpufreq.c diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 0c6fc34..7c4c27d 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -36,6 +36,16 @@ next-level-cache = <&L2>; clocks = <&a9pll>; clock-names = "cpu"; + operating-points = < + /* kHz ignored */ + 1300000 1000000 + 1200000 1000000 + 1100000 1000000 + 800000 1000000 + 400000 1000000 + 200000 1000000 + >; + clock-latency = <100000>; }; cpu@1 { diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 2896881..b7862da 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -1,5 +1,7 @@ config ARCH_HIGHBANK bool "Calxeda ECX-1000 (Highbank)" if ARCH_MULTI_V7 + select ARCH_HAS_CPUFREQ + select ARCH_HAS_OPP select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_AMBA select ARM_GIC diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 5961e64..7aaac9f 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -76,3 +76,19 @@ config ARM_EXYNOS5250_CPUFREQ help This adds the CPUFreq driver for Samsung EXYNOS5250 SoC. + +config ARM_HIGHBANK_CPUFREQ + tristate "Calxeda Highbank-based" + depends on ARCH_HIGHBANK + select CPU_FREQ_TABLE + select GENERIC_CPUFREQ_CPU0 + select PM_OPP + select REGULATOR + + default m + help + This adds the CPUFreq driver for Calxeda Highbank SoC + based boards. + + If in doubt, say N. + diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 1bc90e1..9e8f12a 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -50,6 +50,7 @@ obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o +obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o ################################################################################## # PowerPC platform drivers diff --git a/drivers/cpufreq/highbank-cpufreq.c b/drivers/cpufreq/highbank-cpufreq.c new file mode 100644 index 0000000..1f28fa6 --- /dev/null +++ b/drivers/cpufreq/highbank-cpufreq.c @@ -0,0 +1,102 @@ +/* + * Copyright (C) 2012 Calxeda, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/mailbox.h> + +#define HB_CPUFREQ_CHANGE_NOTE 0x80000001 + +static int hb_voltage_change(unsigned int freq) +{ + int i; + u32 msg[7]; + + msg[0] = HB_CPUFREQ_CHANGE_NOTE; + msg[1] = freq / 1000000; + for (i = 2; i < 7; i++) + msg[i] = 0; + + return pl320_ipc_transmit(msg); +} + +static int hb_cpufreq_clk_notify(struct notifier_block *nb, + unsigned long action, void *hclk) +{ + struct clk_notifier_data *clk_data = hclk; + int i = 0; + + if (action == PRE_RATE_CHANGE) { + if (clk_data->new_rate > clk_data->old_rate) + while (hb_voltage_change(clk_data->new_rate)) + if (i++ > 15) + return NOTIFY_STOP; + } else if (action == POST_RATE_CHANGE) { + if (clk_data->new_rate < clk_data->old_rate) + while (hb_voltage_change(clk_data->new_rate)) + if (i++ > 15) + break; + } + + return NOTIFY_DONE; +} + +static struct notifier_block hb_cpufreq_clk_nb = { + .notifier_call = hb_cpufreq_clk_notify, +}; + +static int hb_cpufreq_driver_init(void) +{ + struct device *cpu_dev; + struct clk *cpu_clk; + struct device_node *np; + int ret; + + np = of_find_node_by_path("/cpus/cpu@0"); + if (!np) { + pr_err("failed to find highbank cpufreq node\n"); + return -ENOENT; + } + + cpu_dev = get_cpu_device(0); + if (!cpu_dev) { + pr_err("failed to get highbank cpufreq device\n"); + ret = -ENODEV; + goto out_put_node; + } + + cpu_dev->of_node = np; + + cpu_clk = clk_get(cpu_dev, NULL); + if (IS_ERR(cpu_clk)) { + ret = PTR_ERR(cpu_clk); + pr_err("failed to get cpu0 clock: %d\n", ret); + goto out_put_node; + } + + ret = clk_notifier_register(cpu_clk, &hb_cpufreq_clk_nb); + if (ret) { + pr_err("failed to register clk notifier: %d\n", ret); + goto out_put_node; + } + +out_put_node: + of_node_put(np); + return ret; +} +late_initcall(hb_cpufreq_driver_init); + +MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@calxeda.com>"); +MODULE_DESCRIPTION("Calxeda Highbank cpufreq driver"); +MODULE_LICENSE("GPL"); -- 1.7.11.7
WARNING: multiple messages have this Message-ID (diff)
From: mark.langsdorf@calxeda.com (Mark Langsdorf) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 6/6 v8] cpufreq, highbank: add support for highbank cpufreq Date: Wed, 5 Dec 2012 10:48:41 -0600 [thread overview] Message-ID: <1354726121-17190-7-git-send-email-mark.langsdorf@calxeda.com> (raw) In-Reply-To: <1354726121-17190-1-git-send-email-mark.langsdorf@calxeda.com> Highbank processors depend on the external ECME to perform voltage management based on a requested frequency. Communication between the A9 cores and the ECME happens over the pl320 IPC channel. Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Cc: shawn.guo at linaro.org Cc: mturquette at linaro.org --- Changes from v7 Removed old attribution to cpufreq-cpu0. Added some description in the documentation. Made cpu_dev, cpu_clk into local variables. Removed __devinit. Removed some unneeded includes. Added a brace to clarify some nested if logic. Changes from v6 Removed devicetree bindings documentation. Restructured driver to use clk notifications. Core driver logic is now cpufreq-clk0. Changes from v5 Changed ipc_transmit() to pl320_ipc_transmit(). Changes from v4 Removed erroneous changes to arch/arm/Kconfig. Removed unnecessary changes to drivers/cpufreq/Kconfig.arm Alphabetized additions to arch/arm/mach-highbank/Kconfig Changed ipc call and header to match new ipc location in drivers/mailbox. Changes from v3 None. Changes from v2 Changed transition latency binding in code to match documentation. Changes from v1 Added highbank specific Kconfig changes. arch/arm/boot/dts/highbank.dts | 10 ++++ arch/arm/mach-highbank/Kconfig | 2 + drivers/cpufreq/Kconfig.arm | 16 ++++++ drivers/cpufreq/Makefile | 1 + drivers/cpufreq/highbank-cpufreq.c | 102 +++++++++++++++++++++++++++++++++++++ 5 files changed, 131 insertions(+) create mode 100644 drivers/cpufreq/highbank-cpufreq.c diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 0c6fc34..7c4c27d 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -36,6 +36,16 @@ next-level-cache = <&L2>; clocks = <&a9pll>; clock-names = "cpu"; + operating-points = < + /* kHz ignored */ + 1300000 1000000 + 1200000 1000000 + 1100000 1000000 + 800000 1000000 + 400000 1000000 + 200000 1000000 + >; + clock-latency = <100000>; }; cpu at 1 { diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 2896881..b7862da 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -1,5 +1,7 @@ config ARCH_HIGHBANK bool "Calxeda ECX-1000 (Highbank)" if ARCH_MULTI_V7 + select ARCH_HAS_CPUFREQ + select ARCH_HAS_OPP select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_AMBA select ARM_GIC diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 5961e64..7aaac9f 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -76,3 +76,19 @@ config ARM_EXYNOS5250_CPUFREQ help This adds the CPUFreq driver for Samsung EXYNOS5250 SoC. + +config ARM_HIGHBANK_CPUFREQ + tristate "Calxeda Highbank-based" + depends on ARCH_HIGHBANK + select CPU_FREQ_TABLE + select GENERIC_CPUFREQ_CPU0 + select PM_OPP + select REGULATOR + + default m + help + This adds the CPUFreq driver for Calxeda Highbank SoC + based boards. + + If in doubt, say N. + diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 1bc90e1..9e8f12a 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -50,6 +50,7 @@ obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o +obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o ################################################################################## # PowerPC platform drivers diff --git a/drivers/cpufreq/highbank-cpufreq.c b/drivers/cpufreq/highbank-cpufreq.c new file mode 100644 index 0000000..1f28fa6 --- /dev/null +++ b/drivers/cpufreq/highbank-cpufreq.c @@ -0,0 +1,102 @@ +/* + * Copyright (C) 2012 Calxeda, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/mailbox.h> + +#define HB_CPUFREQ_CHANGE_NOTE 0x80000001 + +static int hb_voltage_change(unsigned int freq) +{ + int i; + u32 msg[7]; + + msg[0] = HB_CPUFREQ_CHANGE_NOTE; + msg[1] = freq / 1000000; + for (i = 2; i < 7; i++) + msg[i] = 0; + + return pl320_ipc_transmit(msg); +} + +static int hb_cpufreq_clk_notify(struct notifier_block *nb, + unsigned long action, void *hclk) +{ + struct clk_notifier_data *clk_data = hclk; + int i = 0; + + if (action == PRE_RATE_CHANGE) { + if (clk_data->new_rate > clk_data->old_rate) + while (hb_voltage_change(clk_data->new_rate)) + if (i++ > 15) + return NOTIFY_STOP; + } else if (action == POST_RATE_CHANGE) { + if (clk_data->new_rate < clk_data->old_rate) + while (hb_voltage_change(clk_data->new_rate)) + if (i++ > 15) + break; + } + + return NOTIFY_DONE; +} + +static struct notifier_block hb_cpufreq_clk_nb = { + .notifier_call = hb_cpufreq_clk_notify, +}; + +static int hb_cpufreq_driver_init(void) +{ + struct device *cpu_dev; + struct clk *cpu_clk; + struct device_node *np; + int ret; + + np = of_find_node_by_path("/cpus/cpu at 0"); + if (!np) { + pr_err("failed to find highbank cpufreq node\n"); + return -ENOENT; + } + + cpu_dev = get_cpu_device(0); + if (!cpu_dev) { + pr_err("failed to get highbank cpufreq device\n"); + ret = -ENODEV; + goto out_put_node; + } + + cpu_dev->of_node = np; + + cpu_clk = clk_get(cpu_dev, NULL); + if (IS_ERR(cpu_clk)) { + ret = PTR_ERR(cpu_clk); + pr_err("failed to get cpu0 clock: %d\n", ret); + goto out_put_node; + } + + ret = clk_notifier_register(cpu_clk, &hb_cpufreq_clk_nb); + if (ret) { + pr_err("failed to register clk notifier: %d\n", ret); + goto out_put_node; + } + +out_put_node: + of_node_put(np); + return ret; +} +late_initcall(hb_cpufreq_driver_init); + +MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@calxeda.com>"); +MODULE_DESCRIPTION("Calxeda Highbank cpufreq driver"); +MODULE_LICENSE("GPL"); -- 1.7.11.7
next prev parent reply other threads:[~2012-12-05 16:48 UTC|newest] Thread overview: 269+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-10-30 21:04 [PATCH 0/6] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf 2012-10-30 21:04 ` [PATCH 1/6] arm: use devicetree to get smp_twd clock Mark Langsdorf 2012-10-30 21:04 ` Mark Langsdorf 2012-10-30 21:04 ` [PATCH 2/6] clk, highbank: remove non-bypass reset mode Mark Langsdorf 2012-10-30 21:04 ` [PATCH 3/6] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf 2012-10-30 21:04 ` [PATCH 4/6] arm highbank: add support for pl320 IPC Mark Langsdorf 2012-10-30 21:04 ` [PATCH 5/6] power: export opp cpufreq functions Mark Langsdorf 2012-10-31 1:17 ` Nishanth Menon 2012-10-31 1:17 ` Nishanth Menon 2012-10-30 21:04 ` [PATCH 6/6] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf 2012-10-31 0:21 ` [PATCH 0/6] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki [not found] ` <1351685025-26698-1-git-send-email-mark.langsdorf@calxeda.com> 2012-10-31 12:03 ` [PATCH 1/6] arm: use devicetree to get smp_twd clock Mark Langsdorf 2012-10-31 12:03 ` [PATCH 3/6] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf 2012-11-01 2:14 ` MyungJoo Ham 2012-11-02 18:51 ` [PATCH 0/6 v2] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf 2012-11-02 18:51 ` [PATCH 1/6 v2] arm: use devicetree to get smp_twd clock Mark Langsdorf 2012-11-02 18:51 ` Mark Langsdorf 2012-11-02 18:51 ` Mark Langsdorf 2012-11-04 10:08 ` Russell King - ARM Linux 2012-11-04 10:08 ` Russell King - ARM Linux 2012-11-05 22:28 ` Mark Langsdorf 2012-11-05 22:28 ` Mark Langsdorf 2012-11-05 22:31 ` Russell King - ARM Linux 2012-11-05 22:31 ` Russell King - ARM Linux 2012-11-05 22:49 ` Mark Langsdorf 2012-11-05 22:49 ` Mark Langsdorf 2012-11-02 18:51 ` [PATCH 2/6 v2] clk, highbank: remove non-bypass reset mode Mark Langsdorf 2012-11-02 18:51 ` [PATCH 3/6 v2] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf 2012-11-02 18:51 ` [PATCH 4/6 v2] arm highbank: add support for pl320 IPC Mark Langsdorf 2012-11-02 18:51 ` [PATCH 5/6 v2] power: export opp cpufreq functions Mark Langsdorf 2012-11-02 18:51 ` [PATCH 6/6 v2] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf 2012-11-02 21:45 ` [PATCH 0/6 v2] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki 2012-11-06 20:18 ` [PATCH 0/6 v3] " Mark Langsdorf 2012-11-06 20:18 ` [PATCH 1/6 v3] arm: use devicetree to get smp_twd clock Mark Langsdorf 2012-11-06 20:18 ` [PATCH 2/6 v3] clk, highbank: remove non-bypass reset mode Mark Langsdorf 2012-11-06 20:18 ` [PATCH 3/6 v3] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf 2012-11-06 20:18 ` [PATCH 4/6 v3] arm highbank: add support for pl320 IPC Mark Langsdorf 2012-11-06 20:18 ` [PATCH 5/6 v3] power: export opp cpufreq functions Mark Langsdorf 2012-11-06 20:18 ` [PATCH 6/6 v3] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf 2012-11-07 18:11 ` [PATCH 0/6 v3] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf 2012-11-07 18:32 ` [PATCH 0/6 v4] " Mark Langsdorf 2012-11-07 18:32 ` [PATCH 1/6 v4] arm: use devicetree to get smp_twd clock Mark Langsdorf 2012-11-07 18:32 ` [PATCH 2/6 v4] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf 2012-11-12 21:24 ` Mike Turquette 2012-11-12 21:24 ` Mike Turquette 2012-11-12 21:35 ` Mark Langsdorf 2012-11-07 18:32 ` [PATCH 3/6 v4] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf 2012-11-11 16:38 ` Borislav Petkov 2012-11-12 16:35 ` Mark Langsdorf 2012-11-13 16:24 ` Borislav Petkov 2012-11-13 16:33 ` Mark Langsdorf 2012-11-13 19:13 ` Mark Langsdorf 2012-11-17 14:50 ` Borislav Petkov 2012-11-24 10:05 ` Rafael J. Wysocki 2012-11-26 13:57 ` Mark Langsdorf 2012-11-26 15:25 ` Rafael J. Wysocki 2012-11-07 18:32 ` [PATCH 4/6 v4] arm highbank: add support for pl320 IPC Mark Langsdorf 2012-11-14 14:03 ` Rob Herring 2012-11-07 18:32 ` [PATCH 5/6 v4] power: export opp cpufreq functions Mark Langsdorf 2012-11-07 18:32 ` [PATCH 6/6 v4] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf 2012-11-07 18:32 ` Mark Langsdorf 2012-11-07 18:51 ` Rob Herring 2012-11-07 18:51 ` Rob Herring 2012-11-24 10:07 ` [PATCH 0/6 v4] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki 2012-11-27 15:04 ` [PATCH 0/6 v5] " Mark Langsdorf 2012-11-27 15:04 ` Mark Langsdorf 2012-11-27 15:04 ` [PATCH 1/6 v5] arm: use devicetree to get smp_twd clock Mark Langsdorf 2012-11-27 15:04 ` Mark Langsdorf 2012-11-27 15:04 ` [PATCH 2/6 v5] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf 2012-11-27 15:04 ` Mark Langsdorf 2012-11-27 18:15 ` Mike Turquette 2012-11-27 18:15 ` Mike Turquette 2012-11-27 15:04 ` [PATCH 3/6 v5] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf 2012-11-27 15:04 ` Mark Langsdorf 2012-11-27 15:04 ` [PATCH 4/6 v5] arm highbank: add support for pl320 IPC Mark Langsdorf 2012-11-27 15:04 ` Mark Langsdorf 2012-11-27 16:12 ` Thomas Petazzoni 2012-11-27 16:12 ` Thomas Petazzoni 2012-11-27 19:53 ` Mark Langsdorf 2012-11-27 19:53 ` Mark Langsdorf 2012-11-27 19:53 ` Mark Langsdorf [not found] ` <1354602789308-564771.post@n7.nabble.com> 2013-01-29 2:26 ` liuhuan123 2013-02-06 5:43 ` liuhuan123 2013-02-21 5:11 ` liuhuan123 2013-03-21 4:01 ` liuhuan123 2013-03-12 5:29 ` liuhuan123 2012-11-27 15:04 ` [PATCH 5/6 v5] power: export opp cpufreq functions Mark Langsdorf 2012-11-27 15:04 ` Mark Langsdorf 2012-11-27 15:04 ` [PATCH 6/6 v5] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf 2012-11-27 15:04 ` Mark Langsdorf 2012-11-27 15:04 ` Mark Langsdorf 2012-11-27 19:04 ` [PATCH 0/6 v5] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki 2012-11-27 19:04 ` Rafael J. Wysocki 2012-11-27 20:04 ` [PATCH 0/6 v6] " Mark Langsdorf 2012-11-27 20:04 ` Mark Langsdorf 2012-11-27 20:04 ` [PATCH 1/6 v6] arm: use devicetree to get smp_twd clock Mark Langsdorf 2012-11-27 20:04 ` Mark Langsdorf 2012-11-27 20:04 ` [PATCH 2/6 v6] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf 2012-11-27 20:04 ` Mark Langsdorf 2012-11-27 20:04 ` [PATCH 3/6 v6] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf 2012-11-27 20:04 ` Mark Langsdorf 2012-11-27 20:04 ` [PATCH 4/6 v6] arm highbank: add support for pl320 IPC Mark Langsdorf 2012-11-27 20:04 ` Mark Langsdorf 2012-11-27 20:04 ` Mark Langsdorf 2012-11-27 20:04 ` [PATCH 5/6 v6] power: export opp cpufreq functions Mark Langsdorf 2012-11-27 20:04 ` Mark Langsdorf 2012-11-27 20:04 ` [PATCH 6/6 v6] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf 2012-11-27 20:04 ` Mark Langsdorf 2012-11-27 20:04 ` Mark Langsdorf 2012-11-28 2:32 ` Shawn Guo 2012-11-28 2:32 ` Shawn Guo 2012-11-28 2:32 ` Shawn Guo 2012-11-28 13:16 ` Mark Langsdorf 2012-11-28 13:16 ` Mark Langsdorf 2012-11-28 13:16 ` Mark Langsdorf 2012-11-28 14:58 ` Shawn Guo 2012-11-28 14:58 ` Shawn Guo 2012-11-28 14:58 ` Shawn Guo 2012-11-28 15:17 ` Shawn Guo 2012-11-28 15:17 ` Shawn Guo 2012-11-28 15:17 ` Shawn Guo 2012-11-28 15:01 ` Mark Langsdorf 2012-11-28 15:01 ` Mark Langsdorf 2012-11-28 15:01 ` Mark Langsdorf 2012-11-28 16:01 ` Mike Turquette 2012-11-28 16:01 ` Mike Turquette 2012-11-28 16:01 ` Mike Turquette 2012-11-28 16:18 ` Mark Langsdorf 2012-11-28 16:18 ` Mark Langsdorf 2012-11-28 16:18 ` Mark Langsdorf 2012-11-28 21:05 ` Mike Turquette 2012-11-28 21:05 ` Mike Turquette 2012-11-28 21:05 ` Mike Turquette 2012-11-29 0:24 ` Mark Langsdorf 2012-11-29 0:24 ` Mark Langsdorf 2012-11-29 0:24 ` Mark Langsdorf 2012-11-29 1:51 ` Shawn Guo 2012-11-29 1:51 ` Shawn Guo 2012-11-29 1:51 ` Shawn Guo 2012-11-29 4:34 ` Mike Turquette 2012-11-29 4:34 ` Mike Turquette 2012-11-29 4:34 ` Mike Turquette 2012-12-04 14:33 ` [PATCH 0/6 v7] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf 2012-12-04 14:33 ` Mark Langsdorf 2012-12-04 14:33 ` [PATCH 1/6 v7] arm: use devicetree to get smp_twd clock Mark Langsdorf 2012-12-04 14:33 ` Mark Langsdorf 2012-12-04 14:33 ` [PATCH 2/6 v7] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf 2012-12-04 14:33 ` Mark Langsdorf 2012-12-04 14:33 ` [PATCH 3/6 v7] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf 2012-12-04 14:33 ` Mark Langsdorf 2012-12-04 14:34 ` [PATCH 4/6 v7] arm highbank: add support for pl320 IPC Mark Langsdorf 2012-12-04 14:34 ` Mark Langsdorf 2012-12-04 14:34 ` Mark Langsdorf 2012-12-04 14:34 ` [PATCH 5/6 v7] power: export opp cpufreq functions Mark Langsdorf 2012-12-04 14:34 ` Mark Langsdorf 2012-12-04 14:34 ` [PATCH 6/6 v7] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf 2012-12-04 14:34 ` Mark Langsdorf 2012-12-04 16:21 ` Shawn Guo 2012-12-04 16:21 ` Shawn Guo 2012-12-04 16:21 ` Shawn Guo 2012-12-05 16:48 ` [PATCH 0/6 v8] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf 2012-12-05 16:48 ` Mark Langsdorf 2012-12-05 16:48 ` [PATCH 1/6 v8] arm: use devicetree to get smp_twd clock Mark Langsdorf 2012-12-05 16:48 ` Mark Langsdorf 2012-12-05 16:48 ` [PATCH 2/6 v8] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf 2012-12-05 16:48 ` Mark Langsdorf 2012-12-05 18:02 ` Mike Turquette 2012-12-05 18:02 ` Mike Turquette 2012-12-05 16:48 ` [PATCH 3/6 v8] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf 2012-12-05 16:48 ` Mark Langsdorf 2012-12-05 16:48 ` [PATCH 4/6 v8] arm highbank: add support for pl320 IPC Mark Langsdorf 2012-12-05 16:48 ` Mark Langsdorf 2012-12-05 16:48 ` [PATCH 5/6 v8] power: export opp cpufreq functions Mark Langsdorf 2012-12-05 16:48 ` Mark Langsdorf 2012-12-05 16:48 ` Mark Langsdorf [this message] 2012-12-05 16:48 ` [PATCH 6/6 v8] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf 2012-12-05 18:49 ` Mike Turquette 2012-12-05 18:49 ` Mike Turquette 2012-12-05 22:09 ` Mark Langsdorf 2012-12-05 22:09 ` Mark Langsdorf 2012-12-05 22:09 ` Mark Langsdorf 2012-12-06 9:37 ` Shawn Guo 2012-12-06 9:37 ` Shawn Guo 2012-12-06 9:37 ` Shawn Guo 2012-12-27 13:12 ` [PATCH 0/6 v8] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki 2012-12-27 13:12 ` Rafael J. Wysocki 2012-12-27 13:28 ` Mark Langsdorf 2012-12-27 13:28 ` Mark Langsdorf 2012-12-27 13:28 ` Mark Langsdorf 2012-12-27 14:43 ` Rafael J. Wysocki 2012-12-27 14:43 ` Rafael J. Wysocki 2012-12-27 14:43 ` Rafael J. Wysocki 2012-12-06 22:42 ` [PATCH 0/6 v9] " Mark Langsdorf 2012-12-06 22:42 ` Mark Langsdorf 2012-12-06 22:42 ` [PATCH 1/6 v9] arm: use devicetree to get smp_twd clock Mark Langsdorf 2012-12-06 22:42 ` Mark Langsdorf 2012-12-07 14:55 ` Thiago Farina 2012-12-07 14:55 ` Thiago Farina 2012-12-27 5:11 ` Prashant Gaikwad 2012-12-27 5:11 ` Prashant Gaikwad 2012-12-27 5:11 ` Prashant Gaikwad 2012-12-06 22:42 ` [PATCH 2/6 v9] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf 2012-12-06 22:42 ` Mark Langsdorf 2012-12-06 22:42 ` [PATCH 3/6 v9] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf 2012-12-06 22:42 ` Mark Langsdorf 2012-12-06 22:42 ` [PATCH 4/6 v9] arm highbank: add support for pl320 IPC Mark Langsdorf 2012-12-06 22:42 ` Mark Langsdorf 2012-12-06 22:42 ` [PATCH 5/6 v9] power: export opp cpufreq functions Mark Langsdorf 2012-12-06 22:42 ` Mark Langsdorf 2012-12-06 22:42 ` [PATCH 6/6 v9] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf 2012-12-06 22:42 ` Mark Langsdorf 2012-12-07 7:04 ` Mike Turquette 2012-12-07 7:04 ` Mike Turquette 2013-01-04 16:35 ` [PATCH 0/4 v10] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf 2013-01-04 16:35 ` Mark Langsdorf 2013-01-04 16:35 ` [PATCH 1/4 v10] arm: use devicetree to get smp_twd clock Mark Langsdorf 2013-01-04 16:35 ` Mark Langsdorf 2013-01-10 23:34 ` Russell King - ARM Linux 2013-01-10 23:34 ` Russell King - ARM Linux 2013-01-11 14:40 ` Rob Herring 2013-01-11 14:40 ` Rob Herring 2013-01-04 16:35 ` [PATCH 2/4 v10] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf 2013-01-04 16:35 ` Mark Langsdorf 2013-01-04 16:35 ` [PATCH 3/4 v10] arm highbank: add support for pl320 IPC Mark Langsdorf 2013-01-04 16:35 ` Mark Langsdorf 2013-01-04 16:35 ` [PATCH 4/4 v10] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf 2013-01-04 16:35 ` Mark Langsdorf 2013-01-25 19:46 ` [PATCH 0/4 v11] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf 2013-01-25 19:46 ` Mark Langsdorf 2013-01-25 19:46 ` [PATCH 1/4 v11] arm: use device tree to get smp_twd clock Mark Langsdorf 2013-01-25 19:46 ` Mark Langsdorf 2013-01-25 21:03 ` Rafael J. Wysocki 2013-01-25 21:03 ` Rafael J. Wysocki 2013-01-25 21:40 ` Russell King - ARM Linux 2013-01-25 21:40 ` Russell King - ARM Linux 2013-01-25 22:15 ` Rafael J. Wysocki 2013-01-25 22:15 ` Rafael J. Wysocki 2013-01-25 19:46 ` [PATCH 2/4 v11] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf 2013-01-25 19:46 ` Mark Langsdorf 2013-01-25 19:46 ` [PATCH 3/4 v11] arm highbank: add support for pl320 IPC Mark Langsdorf 2013-01-25 19:46 ` Mark Langsdorf 2013-01-28 12:49 ` Rafael J. Wysocki 2013-01-28 12:49 ` Rafael J. Wysocki 2013-01-28 13:44 ` Mark Langsdorf 2013-01-28 13:44 ` Mark Langsdorf 2013-01-28 13:44 ` Mark Langsdorf 2013-01-28 20:48 ` Rafael J. Wysocki 2013-01-28 20:48 ` Rafael J. Wysocki 2013-01-28 20:48 ` Rafael J. Wysocki 2013-01-25 19:46 ` [PATCH 4/4] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf 2013-01-25 19:46 ` Mark Langsdorf 2013-01-26 14:39 ` Shawn Guo 2013-01-26 14:39 ` Shawn Guo 2013-01-26 14:39 ` Shawn Guo 2013-01-26 22:24 ` Rafael J. Wysocki 2013-01-26 22:24 ` Rafael J. Wysocki 2013-01-28 8:37 ` Shawn Guo 2013-01-28 8:37 ` Shawn Guo 2013-01-28 8:37 ` Shawn Guo 2013-01-28 16:13 ` [PATCH 0/4 v12] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf 2013-01-28 16:13 ` Mark Langsdorf 2013-01-28 16:13 ` [PATCH 1/4 v12] arm: use device tree to get smp_twd clock Mark Langsdorf 2013-01-28 16:13 ` Mark Langsdorf 2013-01-28 16:13 ` [PATCH 2/4 v12] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf 2013-01-28 16:13 ` Mark Langsdorf 2013-01-28 16:13 ` [PATCH 3/4 v12] arm highbank: add support for pl320 IPC Mark Langsdorf 2013-01-28 16:13 ` Mark Langsdorf 2013-01-28 16:13 ` [PATCH 4/4 v12] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf 2013-01-28 16:13 ` Mark Langsdorf
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1354726121-17190-7-git-send-email-mark.langsdorf@calxeda.com \ --to=mark.langsdorf@calxeda.com \ --cc=cpufreq@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=mturquette@linaro.org \ --cc=shawn.guo@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.