All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Langsdorf <mark.langsdorf@calxeda.com>
To: linux-kernel@vger.kernel.org, cpufreq@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: Mark Langsdorf <mark.langsdorf@calxeda.com>,
	Rob Herring <rob.herring@calxeda.com>
Subject: [PATCH 1/4 v11] arm: use device tree to get smp_twd clock
Date: Fri, 25 Jan 2013 13:46:42 -0600	[thread overview]
Message-ID: <1359143205-20279-2-git-send-email-mark.langsdorf@calxeda.com> (raw)
In-Reply-To: <1359143205-20279-1-git-send-email-mark.langsdorf@calxeda.com>

From: Rob Herring <rob.herring@calxeda.com>

Move clk setup to twd_local_timer_common_register and rely on
twd_timer_rate being 0 to force calibration if there is no clock.
Remove common_setup_called as it is no longer needed.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
---
Changes from v10
	Reworked to simplify the logic as suggested by Russell King.
Changes from v9
        Updated to work with 3.8 kernel.
Changes from v4, v5, v6, v7, v8
        None.
Changes from v3
        No longer setting *clk to NULL in twd_get_clock().
Changes from v2
        Turned the check for the node pointer into an if-then-else statement.
        Removed the second, redundant clk_get_rate.
Changes from v1
        None.

 arch/arm/kernel/smp_twd.c | 53 +++++++++++++++++------------------------------
 1 file changed, 19 insertions(+), 34 deletions(-)

diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 49f335d..ae0c7bb 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -31,7 +31,6 @@ static void __iomem *twd_base;
 
 static struct clk *twd_clk;
 static unsigned long twd_timer_rate;
-static bool common_setup_called;
 static DEFINE_PER_CPU(bool, percpu_setup_called);
 
 static struct clock_event_device __percpu **twd_evt;
@@ -239,25 +238,28 @@ static irqreturn_t twd_handler(int irq, void *dev_id)
 	return IRQ_NONE;
 }
 
-static struct clk *twd_get_clock(void)
+static void twd_get_clock(struct device_node *np)
 {
-	struct clk *clk;
 	int err;
 
-	clk = clk_get_sys("smp_twd", NULL);
-	if (IS_ERR(clk)) {
-		pr_err("smp_twd: clock not found: %d\n", (int)PTR_ERR(clk));
-		return clk;
+	if (np)
+		twd_clk = of_clk_get(np, 0);
+	else
+		twd_clk = clk_get_sys("smp_twd", NULL);
+
+	if (IS_ERR(twd_clk)) {
+		pr_err("smp_twd: clock not found %d\n", (int) PTR_ERR(twd_clk));
+		return;
 	}
 
-	err = clk_prepare_enable(clk);
+	err = clk_prepare_enable(twd_clk);
 	if (err) {
 		pr_err("smp_twd: clock failed to prepare+enable: %d\n", err);
-		clk_put(clk);
-		return ERR_PTR(err);
+		clk_put(twd_clk);
+		return;
 	}
 
-	return clk;
+	twd_timer_rate = clk_get_rate(twd_clk);
 }
 
 /*
@@ -280,26 +282,7 @@ static int __cpuinit twd_timer_setup(struct clock_event_device *clk)
 	}
 	per_cpu(percpu_setup_called, cpu) = true;
 
-	/*
-	 * This stuff only need to be done once for the entire TWD cluster
-	 * during the runtime of the system.
-	 */
-	if (!common_setup_called) {
-		twd_clk = twd_get_clock();
-
-		/*
-		 * We use IS_ERR_OR_NULL() here, because if the clock stubs
-		 * are active we will get a valid clk reference which is
-		 * however NULL and will return the rate 0. In that case we
-		 * need to calibrate the rate instead.
-		 */
-		if (!IS_ERR_OR_NULL(twd_clk))
-			twd_timer_rate = clk_get_rate(twd_clk);
-		else
-			twd_calibrate_rate();
-
-		common_setup_called = true;
-	}
+	twd_calibrate_rate();
 
 	/*
 	 * The following is done once per CPU the first time .setup() is
@@ -330,7 +313,7 @@ static struct local_timer_ops twd_lt_ops __cpuinitdata = {
 	.stop	= twd_timer_stop,
 };
 
-static int __init twd_local_timer_common_register(void)
+static int __init twd_local_timer_common_register(struct device_node *np)
 {
 	int err;
 
@@ -350,6 +333,8 @@ static int __init twd_local_timer_common_register(void)
 	if (err)
 		goto out_irq;
 
+	twd_get_clock(np);
+
 	return 0;
 
 out_irq:
@@ -373,7 +358,7 @@ int __init twd_local_timer_register(struct twd_local_timer *tlt)
 	if (!twd_base)
 		return -ENOMEM;
 
-	return twd_local_timer_common_register();
+	return twd_local_timer_common_register(NULL);
 }
 
 #ifdef CONFIG_OF
@@ -405,7 +390,7 @@ void __init twd_local_timer_of_register(void)
 		goto out;
 	}
 
-	err = twd_local_timer_common_register();
+	err = twd_local_timer_common_register(np);
 
 out:
 	WARN(err, "twd_local_timer_of_register failed (%d)\n", err);
-- 
1.7.11.7


WARNING: multiple messages have this Message-ID (diff)
From: mark.langsdorf@calxeda.com (Mark Langsdorf)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/4 v11] arm: use device tree to get smp_twd clock
Date: Fri, 25 Jan 2013 13:46:42 -0600	[thread overview]
Message-ID: <1359143205-20279-2-git-send-email-mark.langsdorf@calxeda.com> (raw)
In-Reply-To: <1359143205-20279-1-git-send-email-mark.langsdorf@calxeda.com>

From: Rob Herring <rob.herring@calxeda.com>

Move clk setup to twd_local_timer_common_register and rely on
twd_timer_rate being 0 to force calibration if there is no clock.
Remove common_setup_called as it is no longer needed.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
---
Changes from v10
	Reworked to simplify the logic as suggested by Russell King.
Changes from v9
        Updated to work with 3.8 kernel.
Changes from v4, v5, v6, v7, v8
        None.
Changes from v3
        No longer setting *clk to NULL in twd_get_clock().
Changes from v2
        Turned the check for the node pointer into an if-then-else statement.
        Removed the second, redundant clk_get_rate.
Changes from v1
        None.

 arch/arm/kernel/smp_twd.c | 53 +++++++++++++++++------------------------------
 1 file changed, 19 insertions(+), 34 deletions(-)

diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 49f335d..ae0c7bb 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -31,7 +31,6 @@ static void __iomem *twd_base;
 
 static struct clk *twd_clk;
 static unsigned long twd_timer_rate;
-static bool common_setup_called;
 static DEFINE_PER_CPU(bool, percpu_setup_called);
 
 static struct clock_event_device __percpu **twd_evt;
@@ -239,25 +238,28 @@ static irqreturn_t twd_handler(int irq, void *dev_id)
 	return IRQ_NONE;
 }
 
-static struct clk *twd_get_clock(void)
+static void twd_get_clock(struct device_node *np)
 {
-	struct clk *clk;
 	int err;
 
-	clk = clk_get_sys("smp_twd", NULL);
-	if (IS_ERR(clk)) {
-		pr_err("smp_twd: clock not found: %d\n", (int)PTR_ERR(clk));
-		return clk;
+	if (np)
+		twd_clk = of_clk_get(np, 0);
+	else
+		twd_clk = clk_get_sys("smp_twd", NULL);
+
+	if (IS_ERR(twd_clk)) {
+		pr_err("smp_twd: clock not found %d\n", (int) PTR_ERR(twd_clk));
+		return;
 	}
 
-	err = clk_prepare_enable(clk);
+	err = clk_prepare_enable(twd_clk);
 	if (err) {
 		pr_err("smp_twd: clock failed to prepare+enable: %d\n", err);
-		clk_put(clk);
-		return ERR_PTR(err);
+		clk_put(twd_clk);
+		return;
 	}
 
-	return clk;
+	twd_timer_rate = clk_get_rate(twd_clk);
 }
 
 /*
@@ -280,26 +282,7 @@ static int __cpuinit twd_timer_setup(struct clock_event_device *clk)
 	}
 	per_cpu(percpu_setup_called, cpu) = true;
 
-	/*
-	 * This stuff only need to be done once for the entire TWD cluster
-	 * during the runtime of the system.
-	 */
-	if (!common_setup_called) {
-		twd_clk = twd_get_clock();
-
-		/*
-		 * We use IS_ERR_OR_NULL() here, because if the clock stubs
-		 * are active we will get a valid clk reference which is
-		 * however NULL and will return the rate 0. In that case we
-		 * need to calibrate the rate instead.
-		 */
-		if (!IS_ERR_OR_NULL(twd_clk))
-			twd_timer_rate = clk_get_rate(twd_clk);
-		else
-			twd_calibrate_rate();
-
-		common_setup_called = true;
-	}
+	twd_calibrate_rate();
 
 	/*
 	 * The following is done once per CPU the first time .setup() is
@@ -330,7 +313,7 @@ static struct local_timer_ops twd_lt_ops __cpuinitdata = {
 	.stop	= twd_timer_stop,
 };
 
-static int __init twd_local_timer_common_register(void)
+static int __init twd_local_timer_common_register(struct device_node *np)
 {
 	int err;
 
@@ -350,6 +333,8 @@ static int __init twd_local_timer_common_register(void)
 	if (err)
 		goto out_irq;
 
+	twd_get_clock(np);
+
 	return 0;
 
 out_irq:
@@ -373,7 +358,7 @@ int __init twd_local_timer_register(struct twd_local_timer *tlt)
 	if (!twd_base)
 		return -ENOMEM;
 
-	return twd_local_timer_common_register();
+	return twd_local_timer_common_register(NULL);
 }
 
 #ifdef CONFIG_OF
@@ -405,7 +390,7 @@ void __init twd_local_timer_of_register(void)
 		goto out;
 	}
 
-	err = twd_local_timer_common_register();
+	err = twd_local_timer_common_register(np);
 
 out:
 	WARN(err, "twd_local_timer_of_register failed (%d)\n", err);
-- 
1.7.11.7

  reply	other threads:[~2013-01-25 19:46 UTC|newest]

Thread overview: 269+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-30 21:04 [PATCH 0/6] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf
2012-10-30 21:04 ` [PATCH 1/6] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-10-30 21:04   ` Mark Langsdorf
2012-10-30 21:04 ` [PATCH 2/6] clk, highbank: remove non-bypass reset mode Mark Langsdorf
2012-10-30 21:04 ` [PATCH 3/6] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-10-30 21:04 ` [PATCH 4/6] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-10-30 21:04 ` [PATCH 5/6] power: export opp cpufreq functions Mark Langsdorf
2012-10-31  1:17   ` Nishanth Menon
2012-10-31  1:17     ` Nishanth Menon
2012-10-30 21:04 ` [PATCH 6/6] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-10-31  0:21 ` [PATCH 0/6] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki
     [not found] ` <1351685025-26698-1-git-send-email-mark.langsdorf@calxeda.com>
2012-10-31 12:03   ` [PATCH 1/6] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-10-31 12:03   ` [PATCH 3/6] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-11-01  2:14     ` MyungJoo Ham
2012-11-02 18:51 ` [PATCH 0/6 v2] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf
2012-11-02 18:51   ` [PATCH 1/6 v2] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-11-02 18:51     ` Mark Langsdorf
2012-11-02 18:51     ` Mark Langsdorf
2012-11-04 10:08     ` Russell King - ARM Linux
2012-11-04 10:08       ` Russell King - ARM Linux
2012-11-05 22:28       ` Mark Langsdorf
2012-11-05 22:28         ` Mark Langsdorf
2012-11-05 22:31         ` Russell King - ARM Linux
2012-11-05 22:31           ` Russell King - ARM Linux
2012-11-05 22:49           ` Mark Langsdorf
2012-11-05 22:49             ` Mark Langsdorf
2012-11-02 18:51   ` [PATCH 2/6 v2] clk, highbank: remove non-bypass reset mode Mark Langsdorf
2012-11-02 18:51   ` [PATCH 3/6 v2] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-11-02 18:51   ` [PATCH 4/6 v2] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-11-02 18:51   ` [PATCH 5/6 v2] power: export opp cpufreq functions Mark Langsdorf
2012-11-02 18:51   ` [PATCH 6/6 v2] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-11-02 21:45   ` [PATCH 0/6 v2] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki
2012-11-06 20:18 ` [PATCH 0/6 v3] " Mark Langsdorf
2012-11-06 20:18   ` [PATCH 1/6 v3] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-11-06 20:18   ` [PATCH 2/6 v3] clk, highbank: remove non-bypass reset mode Mark Langsdorf
2012-11-06 20:18   ` [PATCH 3/6 v3] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-11-06 20:18   ` [PATCH 4/6 v3] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-11-06 20:18   ` [PATCH 5/6 v3] power: export opp cpufreq functions Mark Langsdorf
2012-11-06 20:18   ` [PATCH 6/6 v3] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-11-07 18:11   ` [PATCH 0/6 v3] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf
2012-11-07 18:32 ` [PATCH 0/6 v4] " Mark Langsdorf
2012-11-07 18:32   ` [PATCH 1/6 v4] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-11-07 18:32   ` [PATCH 2/6 v4] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2012-11-12 21:24     ` Mike Turquette
2012-11-12 21:24       ` Mike Turquette
2012-11-12 21:35       ` Mark Langsdorf
2012-11-07 18:32   ` [PATCH 3/6 v4] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-11-11 16:38     ` Borislav Petkov
2012-11-12 16:35       ` Mark Langsdorf
2012-11-13 16:24         ` Borislav Petkov
2012-11-13 16:33           ` Mark Langsdorf
2012-11-13 19:13             ` Mark Langsdorf
2012-11-17 14:50               ` Borislav Petkov
2012-11-24 10:05                 ` Rafael J. Wysocki
2012-11-26 13:57                   ` Mark Langsdorf
2012-11-26 15:25                     ` Rafael J. Wysocki
2012-11-07 18:32   ` [PATCH 4/6 v4] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-11-14 14:03     ` Rob Herring
2012-11-07 18:32   ` [PATCH 5/6 v4] power: export opp cpufreq functions Mark Langsdorf
2012-11-07 18:32   ` [PATCH 6/6 v4] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-11-07 18:32     ` Mark Langsdorf
2012-11-07 18:51     ` Rob Herring
2012-11-07 18:51       ` Rob Herring
2012-11-24 10:07   ` [PATCH 0/6 v4] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki
2012-11-27 15:04 ` [PATCH 0/6 v5] " Mark Langsdorf
2012-11-27 15:04   ` Mark Langsdorf
2012-11-27 15:04   ` [PATCH 1/6 v5] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-11-27 15:04     ` Mark Langsdorf
2012-11-27 15:04   ` [PATCH 2/6 v5] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2012-11-27 15:04     ` Mark Langsdorf
2012-11-27 18:15     ` Mike Turquette
2012-11-27 18:15       ` Mike Turquette
2012-11-27 15:04   ` [PATCH 3/6 v5] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-11-27 15:04     ` Mark Langsdorf
2012-11-27 15:04   ` [PATCH 4/6 v5] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-11-27 15:04     ` Mark Langsdorf
2012-11-27 16:12     ` Thomas Petazzoni
2012-11-27 16:12       ` Thomas Petazzoni
2012-11-27 19:53       ` Mark Langsdorf
2012-11-27 19:53         ` Mark Langsdorf
2012-11-27 19:53         ` Mark Langsdorf
     [not found]       ` <1354602789308-564771.post@n7.nabble.com>
2013-01-29  2:26         ` liuhuan123
2013-02-06  5:43         ` liuhuan123
2013-02-21  5:11         ` liuhuan123
2013-03-21  4:01           ` liuhuan123
2013-03-12  5:29         ` liuhuan123
2012-11-27 15:04   ` [PATCH 5/6 v5] power: export opp cpufreq functions Mark Langsdorf
2012-11-27 15:04     ` Mark Langsdorf
2012-11-27 15:04   ` [PATCH 6/6 v5] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-11-27 15:04     ` Mark Langsdorf
2012-11-27 15:04     ` Mark Langsdorf
2012-11-27 19:04   ` [PATCH 0/6 v5] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki
2012-11-27 19:04     ` Rafael J. Wysocki
2012-11-27 20:04 ` [PATCH 0/6 v6] " Mark Langsdorf
2012-11-27 20:04   ` Mark Langsdorf
2012-11-27 20:04   ` [PATCH 1/6 v6] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-11-27 20:04     ` Mark Langsdorf
2012-11-27 20:04   ` [PATCH 2/6 v6] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2012-11-27 20:04     ` Mark Langsdorf
2012-11-27 20:04   ` [PATCH 3/6 v6] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-11-27 20:04     ` Mark Langsdorf
2012-11-27 20:04   ` [PATCH 4/6 v6] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-11-27 20:04     ` Mark Langsdorf
2012-11-27 20:04     ` Mark Langsdorf
2012-11-27 20:04   ` [PATCH 5/6 v6] power: export opp cpufreq functions Mark Langsdorf
2012-11-27 20:04     ` Mark Langsdorf
2012-11-27 20:04   ` [PATCH 6/6 v6] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-11-27 20:04     ` Mark Langsdorf
2012-11-27 20:04     ` Mark Langsdorf
2012-11-28  2:32     ` Shawn Guo
2012-11-28  2:32       ` Shawn Guo
2012-11-28  2:32       ` Shawn Guo
2012-11-28 13:16       ` Mark Langsdorf
2012-11-28 13:16         ` Mark Langsdorf
2012-11-28 13:16         ` Mark Langsdorf
2012-11-28 14:58         ` Shawn Guo
2012-11-28 14:58           ` Shawn Guo
2012-11-28 14:58           ` Shawn Guo
2012-11-28 15:17           ` Shawn Guo
2012-11-28 15:17             ` Shawn Guo
2012-11-28 15:17             ` Shawn Guo
2012-11-28 15:01             ` Mark Langsdorf
2012-11-28 15:01               ` Mark Langsdorf
2012-11-28 15:01               ` Mark Langsdorf
2012-11-28 16:01             ` Mike Turquette
2012-11-28 16:01               ` Mike Turquette
2012-11-28 16:01               ` Mike Turquette
2012-11-28 16:18               ` Mark Langsdorf
2012-11-28 16:18                 ` Mark Langsdorf
2012-11-28 16:18                 ` Mark Langsdorf
2012-11-28 21:05                 ` Mike Turquette
2012-11-28 21:05                   ` Mike Turquette
2012-11-28 21:05                   ` Mike Turquette
2012-11-29  0:24                   ` Mark Langsdorf
2012-11-29  0:24                     ` Mark Langsdorf
2012-11-29  0:24                     ` Mark Langsdorf
2012-11-29  1:51               ` Shawn Guo
2012-11-29  1:51                 ` Shawn Guo
2012-11-29  1:51                 ` Shawn Guo
2012-11-29  4:34                 ` Mike Turquette
2012-11-29  4:34                   ` Mike Turquette
2012-11-29  4:34                   ` Mike Turquette
2012-12-04 14:33 ` [PATCH 0/6 v7] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf
2012-12-04 14:33   ` Mark Langsdorf
2012-12-04 14:33   ` [PATCH 1/6 v7] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-12-04 14:33     ` Mark Langsdorf
2012-12-04 14:33   ` [PATCH 2/6 v7] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2012-12-04 14:33     ` Mark Langsdorf
2012-12-04 14:33   ` [PATCH 3/6 v7] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-12-04 14:33     ` Mark Langsdorf
2012-12-04 14:34   ` [PATCH 4/6 v7] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-12-04 14:34     ` Mark Langsdorf
2012-12-04 14:34     ` Mark Langsdorf
2012-12-04 14:34   ` [PATCH 5/6 v7] power: export opp cpufreq functions Mark Langsdorf
2012-12-04 14:34     ` Mark Langsdorf
2012-12-04 14:34   ` [PATCH 6/6 v7] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-12-04 14:34     ` Mark Langsdorf
2012-12-04 16:21     ` Shawn Guo
2012-12-04 16:21       ` Shawn Guo
2012-12-04 16:21       ` Shawn Guo
2012-12-05 16:48 ` [PATCH 0/6 v8] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf
2012-12-05 16:48   ` Mark Langsdorf
2012-12-05 16:48   ` [PATCH 1/6 v8] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-12-05 16:48     ` Mark Langsdorf
2012-12-05 16:48   ` [PATCH 2/6 v8] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2012-12-05 16:48     ` Mark Langsdorf
2012-12-05 18:02     ` Mike Turquette
2012-12-05 18:02       ` Mike Turquette
2012-12-05 16:48   ` [PATCH 3/6 v8] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-12-05 16:48     ` Mark Langsdorf
2012-12-05 16:48   ` [PATCH 4/6 v8] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-12-05 16:48     ` Mark Langsdorf
2012-12-05 16:48   ` [PATCH 5/6 v8] power: export opp cpufreq functions Mark Langsdorf
2012-12-05 16:48     ` Mark Langsdorf
2012-12-05 16:48   ` [PATCH 6/6 v8] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-12-05 16:48     ` Mark Langsdorf
2012-12-05 18:49     ` Mike Turquette
2012-12-05 18:49       ` Mike Turquette
2012-12-05 22:09       ` Mark Langsdorf
2012-12-05 22:09         ` Mark Langsdorf
2012-12-05 22:09         ` Mark Langsdorf
2012-12-06  9:37     ` Shawn Guo
2012-12-06  9:37       ` Shawn Guo
2012-12-06  9:37       ` Shawn Guo
2012-12-27 13:12   ` [PATCH 0/6 v8] cpufreq: add support for Calxeda ECX-1000 (highbank) Rafael J. Wysocki
2012-12-27 13:12     ` Rafael J. Wysocki
2012-12-27 13:28     ` Mark Langsdorf
2012-12-27 13:28       ` Mark Langsdorf
2012-12-27 13:28       ` Mark Langsdorf
2012-12-27 14:43       ` Rafael J. Wysocki
2012-12-27 14:43         ` Rafael J. Wysocki
2012-12-27 14:43         ` Rafael J. Wysocki
2012-12-06 22:42 ` [PATCH 0/6 v9] " Mark Langsdorf
2012-12-06 22:42   ` Mark Langsdorf
2012-12-06 22:42   ` [PATCH 1/6 v9] arm: use devicetree to get smp_twd clock Mark Langsdorf
2012-12-06 22:42     ` Mark Langsdorf
2012-12-07 14:55     ` Thiago Farina
2012-12-07 14:55       ` Thiago Farina
2012-12-27  5:11     ` Prashant Gaikwad
2012-12-27  5:11       ` Prashant Gaikwad
2012-12-27  5:11       ` Prashant Gaikwad
2012-12-06 22:42   ` [PATCH 2/6 v9] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2012-12-06 22:42     ` Mark Langsdorf
2012-12-06 22:42   ` [PATCH 3/6 v9] cpufreq: tolerate inexact values when collecting stats Mark Langsdorf
2012-12-06 22:42     ` Mark Langsdorf
2012-12-06 22:42   ` [PATCH 4/6 v9] arm highbank: add support for pl320 IPC Mark Langsdorf
2012-12-06 22:42     ` Mark Langsdorf
2012-12-06 22:42   ` [PATCH 5/6 v9] power: export opp cpufreq functions Mark Langsdorf
2012-12-06 22:42     ` Mark Langsdorf
2012-12-06 22:42   ` [PATCH 6/6 v9] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2012-12-06 22:42     ` Mark Langsdorf
2012-12-07  7:04     ` Mike Turquette
2012-12-07  7:04       ` Mike Turquette
2013-01-04 16:35 ` [PATCH 0/4 v10] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf
2013-01-04 16:35   ` Mark Langsdorf
2013-01-04 16:35   ` [PATCH 1/4 v10] arm: use devicetree to get smp_twd clock Mark Langsdorf
2013-01-04 16:35     ` Mark Langsdorf
2013-01-10 23:34     ` Russell King - ARM Linux
2013-01-10 23:34       ` Russell King - ARM Linux
2013-01-11 14:40       ` Rob Herring
2013-01-11 14:40         ` Rob Herring
2013-01-04 16:35   ` [PATCH 2/4 v10] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2013-01-04 16:35     ` Mark Langsdorf
2013-01-04 16:35   ` [PATCH 3/4 v10] arm highbank: add support for pl320 IPC Mark Langsdorf
2013-01-04 16:35     ` Mark Langsdorf
2013-01-04 16:35   ` [PATCH 4/4 v10] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2013-01-04 16:35     ` Mark Langsdorf
2013-01-25 19:46 ` [PATCH 0/4 v11] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf
2013-01-25 19:46   ` Mark Langsdorf
2013-01-25 19:46   ` Mark Langsdorf [this message]
2013-01-25 19:46     ` [PATCH 1/4 v11] arm: use device tree to get smp_twd clock Mark Langsdorf
2013-01-25 21:03     ` Rafael J. Wysocki
2013-01-25 21:03       ` Rafael J. Wysocki
2013-01-25 21:40       ` Russell King - ARM Linux
2013-01-25 21:40         ` Russell King - ARM Linux
2013-01-25 22:15         ` Rafael J. Wysocki
2013-01-25 22:15           ` Rafael J. Wysocki
2013-01-25 19:46   ` [PATCH 2/4 v11] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2013-01-25 19:46     ` Mark Langsdorf
2013-01-25 19:46   ` [PATCH 3/4 v11] arm highbank: add support for pl320 IPC Mark Langsdorf
2013-01-25 19:46     ` Mark Langsdorf
2013-01-28 12:49     ` Rafael J. Wysocki
2013-01-28 12:49       ` Rafael J. Wysocki
2013-01-28 13:44       ` Mark Langsdorf
2013-01-28 13:44         ` Mark Langsdorf
2013-01-28 13:44         ` Mark Langsdorf
2013-01-28 20:48         ` Rafael J. Wysocki
2013-01-28 20:48           ` Rafael J. Wysocki
2013-01-28 20:48           ` Rafael J. Wysocki
2013-01-25 19:46   ` [PATCH 4/4] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2013-01-25 19:46     ` Mark Langsdorf
2013-01-26 14:39     ` Shawn Guo
2013-01-26 14:39       ` Shawn Guo
2013-01-26 14:39       ` Shawn Guo
2013-01-26 22:24       ` Rafael J. Wysocki
2013-01-26 22:24         ` Rafael J. Wysocki
2013-01-28  8:37         ` Shawn Guo
2013-01-28  8:37           ` Shawn Guo
2013-01-28  8:37           ` Shawn Guo
2013-01-28 16:13 ` [PATCH 0/4 v12] cpufreq: add support for Calxeda ECX-1000 (highbank) Mark Langsdorf
2013-01-28 16:13   ` Mark Langsdorf
2013-01-28 16:13   ` [PATCH 1/4 v12] arm: use device tree to get smp_twd clock Mark Langsdorf
2013-01-28 16:13     ` Mark Langsdorf
2013-01-28 16:13   ` [PATCH 2/4 v12] clk, highbank: Prevent glitches in non-bypass reset mode Mark Langsdorf
2013-01-28 16:13     ` Mark Langsdorf
2013-01-28 16:13   ` [PATCH 3/4 v12] arm highbank: add support for pl320 IPC Mark Langsdorf
2013-01-28 16:13     ` Mark Langsdorf
2013-01-28 16:13   ` [PATCH 4/4 v12] cpufreq, highbank: add support for highbank cpufreq Mark Langsdorf
2013-01-28 16:13     ` Mark Langsdorf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1359143205-20279-2-git-send-email-mark.langsdorf@calxeda.com \
    --to=mark.langsdorf@calxeda.com \
    --cc=cpufreq@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rob.herring@calxeda.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.