All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tero Kristo <t-kristo@ti.com>
To: linux-omap@vger.kernel.org
Cc: lrg@ti.com, broonie@opensource.wolfsonmicro.com
Subject: [RFC 4/4] OMAP3: beagle rev-c4: enable OPP6
Date: Fri, 8 Jul 2011 18:56:28 +0300	[thread overview]
Message-ID: <1310140588-26078-5-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1310140588-26078-1-git-send-email-t-kristo@ti.com>

Beagleboard rev-c4 has a speed sorted OMAP3530 chip which can run at 720MHz.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/board-omap3beagle.c |   32 +++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/opp3xxx_data.c      |    4 +++
 2 files changed, 36 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 6d3a266..bc3e5ed 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -574,6 +574,38 @@ static void __init beagle_opp_init(void)
 		return;
 	}
 
+	/* Custom OPP enabled for C4 */
+	if (omap3_beagle_version == OMAP3BEAGLE_BOARD_C4) {
+		struct omap_hwmod *mh = omap_hwmod_lookup("mpu");
+		struct omap_hwmod *dh = omap_hwmod_lookup("iva");
+		struct device *dev;
+
+		if (!mh || !dh) {
+			pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
+				__func__, mh, dh);
+		}
+		/* Enable MPU 720MHz opp */
+		dev = &mh->od->pdev.dev;
+		r = opp_enable(dev, 720000000);
+
+		/* Enable IVA 520MHz opp */
+		dev = &dh->od->pdev.dev;
+		r |= opp_enable(dev, 520000000);
+
+		if (r) {
+			pr_err("%s: failed to enable higher opp %d\n",
+				__func__, r);
+			/*
+			 * Cleanup - disable the higher freqs - we dont care
+			 * about the results
+			 */
+			dev = &mh->od->pdev.dev;
+			opp_disable(dev, 720000000);
+			dev = &dh->od->pdev.dev;
+			opp_disable(dev, 520000000);
+		}
+	}
+
 	/* Custom OPP enabled for all xM versions */
 	if (cpu_is_omap3630()) {
 		struct omap_hwmod *mh = omap_hwmod_lookup("mpu");
diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c
index d95f3f9..a0f5fe1 100644
--- a/arch/arm/mach-omap2/opp3xxx_data.c
+++ b/arch/arm/mach-omap2/opp3xxx_data.c
@@ -98,6 +98,8 @@ static struct omap_opp_def __initdata omap34xx_opp_def_list[] = {
 	OPP_INITIALIZER("mpu", true, 550000000, OMAP3430_VDD_MPU_OPP4_UV),
 	/* MPU OPP5 */
 	OPP_INITIALIZER("mpu", true, 600000000, OMAP3430_VDD_MPU_OPP5_UV),
+	/* MPU OPP6 : omap3530 high speed grade only */
+	OPP_INITIALIZER("mpu", false, 720000000, OMAP3430_VDD_MPU_OPP5_UV),
 
 	/*
 	 * L3 OPP1 - 41.5 MHz is disabled because: The voltage for that OPP is
@@ -123,6 +125,8 @@ static struct omap_opp_def __initdata omap34xx_opp_def_list[] = {
 	OPP_INITIALIZER("iva", true, 400000000, OMAP3430_VDD_MPU_OPP4_UV),
 	/* DSP OPP5 */
 	OPP_INITIALIZER("iva", true, 430000000, OMAP3430_VDD_MPU_OPP5_UV),
+	/* DSP OPP6 : omap3530 high speed grade only */
+	OPP_INITIALIZER("iva", false, 520000000, OMAP3430_VDD_MPU_OPP5_UV),
 };
 
 static struct omap_opp_def __initdata omap36xx_opp_def_list[] = {
-- 
1.7.4.1


Texas Instruments Oy, Tekniikantie 12, 02150 Espoo. Y-tunnus: 0115040-6. Kotipaikka: Helsinki
 


  parent reply	other threads:[~2011-07-08 15:57 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-07-08 15:56 [RFC 0/4] TWL external controller support Tero Kristo
2011-07-08 15:56 ` [RFC 1/4] twl-regulator: extend for SMPS regulators and external controllers Tero Kristo
2011-07-08 18:26   ` Liam Girdwood
2011-07-09  1:21   ` Mark Brown
2011-07-08 15:56 ` [RFC 2/4] omap3beagle: Instantiate VDD1 and VDD2 regulators Tero Kristo
2011-07-08 16:22   ` Felipe Balbi
2011-07-08 15:56 ` [RFC 3/4] omap: attach external controller to VDD1/VDD2 Tero Kristo
2011-07-08 16:23   ` Felipe Balbi
2011-07-08 15:56 ` Tero Kristo [this message]
2011-07-08 16:23   ` [RFC 4/4] OMAP3: beagle rev-c4: enable OPP6 Koen Kooi
2011-07-08 16:25 ` [RFC 0/4] TWL external controller support Felipe Balbi
2011-07-09  1:24   ` Mark Brown
2011-07-09 10:40     ` Felipe Balbi
2011-07-09 10:56       ` Mark Brown
2011-07-11  8:23         ` Tero Kristo
2011-07-11 10:05           ` Mark Brown
2011-07-11 10:48             ` Tero Kristo
2011-07-11 12:11               ` Mark Brown
2011-07-11 13:06                 ` Tero Kristo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1310140588-26078-5-git-send-email-t-kristo@ti.com \
    --to=t-kristo@ti.com \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=linux-omap@vger.kernel.org \
    --cc=lrg@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.