* [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2017-10-31 15:50 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:50 UTC (permalink / raw)
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki,
kvmarm-FPEHb7Xf0XXUo1n7N8X6UoWGPAHP3yOg,
libc-alpha-9JcytcrH/bA+uJoB2kUjGw,
linux-arch-u79uwXL29TY76Z2rM5mHXA, Alan Hayward, Alexander Viro,
Christoffer Dall, Mark Rutland, Oleg Nesterov, Dmitry Safonov,
H . J . Lu, H. Peter Anvin, Ingo Molnar, Thomas Gleixner,
Michael Kerrisk
This series implements Linux kernel support for the ARM Scalable Vector
Extension (SVE). [1] It supersedes the previous v3: see [3] for link
and full cover letter.
This is a minor update to v4, but does contain a couple of important
fixes.
As in previous postings, the last two patches (here 29-30) are still
RFC and not proposed for merging at this time.
The patches apply on
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git
for-next/core
d7b1d22d3821 ("arm64: uapi: Remove PSR_Q_BIT")
To reduce spam, some people may not been copied on the entire series.
For those who did not receive the whole series, it can be found in the
linux-arm-kernel archive. [2]
See the individual patches for details of changes.
For reviewer convenience, a git tree is available. [4]
Since there are some changes against already-reviewed patches, I've also
pushed an unsquashed fixes tree for people to take a look at if it
helps. [5]
Summary:
* "regset: Add support for dynamically sized regsets" fixed to avoid
x86 breakage;
* one trival arm64 patch added to add asmlinkage annotations, and a
corresponding minor change to the Core task context handling patch;
* one new arm64 fix ("signal: Verify extra data is user-readable in
sys_rt_sigreturn") to ensure that access_ok() checks are done for the
whole extended signal frame, not just the base frame;
* one minor fix to the SVE sigreturn code to return consistent
intermediate error values (semantic correctness, non-functional
change);
* one minor change to call __copy_from_user() instead of
copy_from_user() in a situation where there is already an access_ok()
check;
[1] ARM Scalable Vector Extension
https://community.arm.com/groups/processors/blog/2016/08/22/technology-update-the-scalable-vector-extension-sve-for-the-armv8-a-architecture
[2] linux-arm-kernel October 2017 Archives by thread
http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/thread.html
[3] [PATCH v4 00/28] ARM Scalable Vector Extension (SVE)
http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/539414.html
[4] For review and testing only -- **do not pull**
(This branch has review changelogs which should not form part of
the final commits.)
v5 series (this posting)
http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v5
git://linux-arm.org/linux-dm.git sve/v5
[5] For review and testing only -- **do not pull**
(This branch has review changelogs which should not form part of
the final commits.)
v4 with unsquashed fixes
http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v4%2Bfixes
git://linux-arm.org/linux-dm.git sve/v4+fixes
Dave Martin (30):
regset: Add support for dynamically sized regsets
arm64: fpsimd: Correctly annotate exception helpers called from asm
arm64: signal: Verify extra data is user-readable in sys_rt_sigreturn
arm64: KVM: Hide unsupported AArch64 CPU features from guests
arm64: efi: Add missing Kconfig dependency on KERNEL_MODE_NEON
arm64: Port deprecated instruction emulation to new sysctl interface
arm64: fpsimd: Simplify uses of {set,clear}_ti_thread_flag()
arm64/sve: System register and exception syndrome definitions
arm64/sve: Low-level SVE architectural state manipulation functions
arm64/sve: Kconfig update and conditional compilation support
arm64/sve: Signal frame and context structure definition
arm64/sve: Low-level CPU setup
arm64/sve: Core task context handling
arm64/sve: Support vector length resetting for new processes
arm64/sve: Signal handling support
arm64/sve: Backend logic for setting the vector length
arm64: cpufeature: Move sys_caps_initialised declarations
arm64/sve: Probe SVE capabilities and usable vector lengths
arm64/sve: Preserve SVE registers around kernel-mode NEON use
arm64/sve: Preserve SVE registers around EFI runtime service calls
arm64/sve: ptrace and ELF coredump support
arm64/sve: Add prctl controls for userspace vector length management
arm64/sve: Add sysctl to set the default vector length for new
processes
arm64/sve: KVM: Prevent guests from using SVE
arm64/sve: KVM: Treat guest SVE use as undefined instruction execution
arm64/sve: KVM: Hide SVE from CPU features exposed to guests
arm64/sve: Detect SVE and activate runtime support
arm64/sve: Add documentation
arm64: signal: Report signal frame size to userspace via auxv
arm64/sve: signal: Include SVE when computing AT_MINSIGSTKSZ
Documentation/arm64/cpu-feature-registers.txt | 6 +-
Documentation/arm64/elf_hwcaps.txt | 4 +
Documentation/arm64/sve.txt | 508 +++++++++++++++
arch/arm/include/asm/kvm_host.h | 3 +
arch/arm64/Kconfig | 12 +
arch/arm64/include/asm/cpu.h | 4 +
arch/arm64/include/asm/cpucaps.h | 3 +-
arch/arm64/include/asm/cpufeature.h | 42 ++
arch/arm64/include/asm/elf.h | 5 +
arch/arm64/include/asm/esr.h | 3 +-
arch/arm64/include/asm/fpsimd.h | 71 +-
arch/arm64/include/asm/fpsimdmacros.h | 148 +++++
arch/arm64/include/asm/kvm_arm.h | 5 +-
arch/arm64/include/asm/kvm_host.h | 11 +
arch/arm64/include/asm/processor.h | 10 +
arch/arm64/include/asm/sysreg.h | 24 +
arch/arm64/include/asm/thread_info.h | 5 +
arch/arm64/include/asm/traps.h | 2 +
arch/arm64/include/uapi/asm/auxvec.h | 3 +-
arch/arm64/include/uapi/asm/hwcap.h | 1 +
arch/arm64/include/uapi/asm/ptrace.h | 138 ++++
arch/arm64/include/uapi/asm/sigcontext.h | 120 +++-
arch/arm64/kernel/armv8_deprecated.c | 15 +-
arch/arm64/kernel/cpufeature.c | 99 ++-
arch/arm64/kernel/cpuinfo.c | 7 +
arch/arm64/kernel/entry-fpsimd.S | 17 +
arch/arm64/kernel/entry.S | 40 +-
arch/arm64/kernel/fpsimd.c | 907 +++++++++++++++++++++++++-
arch/arm64/kernel/head.S | 13 +-
arch/arm64/kernel/process.c | 24 +
arch/arm64/kernel/ptrace.c | 280 +++++++-
arch/arm64/kernel/signal.c | 220 ++++++-
arch/arm64/kernel/signal32.c | 2 +-
arch/arm64/kernel/traps.c | 7 +-
arch/arm64/kvm/handle_exit.c | 8 +
arch/arm64/kvm/hyp/switch.c | 12 +-
arch/arm64/kvm/sys_regs.c | 292 +++++++--
fs/binfmt_elf.c | 10 +-
include/linux/regset.h | 67 +-
include/uapi/linux/elf.h | 1 +
include/uapi/linux/prctl.h | 9 +
kernel/sys.c | 12 +
virt/kvm/arm/arm.c | 3 +
43 files changed, 3023 insertions(+), 150 deletions(-)
create mode 100644 Documentation/arm64/sve.txt
--
2.1.4
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2017-10-31 15:50 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:50 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch,
Alan Hayward, Alexander Viro, Christoffer Dall, Mark Rutland,
Oleg Nesterov, Dmitry Safonov, H . J . Lu, H. Peter Anvin,
Ingo Molnar, Thomas Gleixner, Michael Kerrisk, linux-api
This series implements Linux kernel support for the ARM Scalable Vector
Extension (SVE). [1] It supersedes the previous v3: see [3] for link
and full cover letter.
This is a minor update to v4, but does contain a couple of important
fixes.
As in previous postings, the last two patches (here 29-30) are still
RFC and not proposed for merging at this time.
The patches apply on
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git
for-next/core
d7b1d22d3821 ("arm64: uapi: Remove PSR_Q_BIT")
To reduce spam, some people may not been copied on the entire series.
For those who did not receive the whole series, it can be found in the
linux-arm-kernel archive. [2]
See the individual patches for details of changes.
For reviewer convenience, a git tree is available. [4]
Since there are some changes against already-reviewed patches, I've also
pushed an unsquashed fixes tree for people to take a look at if it
helps. [5]
Summary:
* "regset: Add support for dynamically sized regsets" fixed to avoid
x86 breakage;
* one trival arm64 patch added to add asmlinkage annotations, and a
corresponding minor change to the Core task context handling patch;
* one new arm64 fix ("signal: Verify extra data is user-readable in
sys_rt_sigreturn") to ensure that access_ok() checks are done for the
whole extended signal frame, not just the base frame;
* one minor fix to the SVE sigreturn code to return consistent
intermediate error values (semantic correctness, non-functional
change);
* one minor change to call __copy_from_user() instead of
copy_from_user() in a situation where there is already an access_ok()
check;
[1] ARM Scalable Vector Extension
https://community.arm.com/groups/processors/blog/2016/08/22/technology-update-the-scalable-vector-extension-sve-for-the-armv8-a-architecture
[2] linux-arm-kernel October 2017 Archives by thread
http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/thread.html
[3] [PATCH v4 00/28] ARM Scalable Vector Extension (SVE)
http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/539414.html
[4] For review and testing only -- **do not pull**
(This branch has review changelogs which should not form part of
the final commits.)
v5 series (this posting)
http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v5
git://linux-arm.org/linux-dm.git sve/v5
[5] For review and testing only -- **do not pull**
(This branch has review changelogs which should not form part of
the final commits.)
v4 with unsquashed fixes
http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v4%2Bfixes
git://linux-arm.org/linux-dm.git sve/v4+fixes
Dave Martin (30):
regset: Add support for dynamically sized regsets
arm64: fpsimd: Correctly annotate exception helpers called from asm
arm64: signal: Verify extra data is user-readable in sys_rt_sigreturn
arm64: KVM: Hide unsupported AArch64 CPU features from guests
arm64: efi: Add missing Kconfig dependency on KERNEL_MODE_NEON
arm64: Port deprecated instruction emulation to new sysctl interface
arm64: fpsimd: Simplify uses of {set,clear}_ti_thread_flag()
arm64/sve: System register and exception syndrome definitions
arm64/sve: Low-level SVE architectural state manipulation functions
arm64/sve: Kconfig update and conditional compilation support
arm64/sve: Signal frame and context structure definition
arm64/sve: Low-level CPU setup
arm64/sve: Core task context handling
arm64/sve: Support vector length resetting for new processes
arm64/sve: Signal handling support
arm64/sve: Backend logic for setting the vector length
arm64: cpufeature: Move sys_caps_initialised declarations
arm64/sve: Probe SVE capabilities and usable vector lengths
arm64/sve: Preserve SVE registers around kernel-mode NEON use
arm64/sve: Preserve SVE registers around EFI runtime service calls
arm64/sve: ptrace and ELF coredump support
arm64/sve: Add prctl controls for userspace vector length management
arm64/sve: Add sysctl to set the default vector length for new
processes
arm64/sve: KVM: Prevent guests from using SVE
arm64/sve: KVM: Treat guest SVE use as undefined instruction execution
arm64/sve: KVM: Hide SVE from CPU features exposed to guests
arm64/sve: Detect SVE and activate runtime support
arm64/sve: Add documentation
arm64: signal: Report signal frame size to userspace via auxv
arm64/sve: signal: Include SVE when computing AT_MINSIGSTKSZ
Documentation/arm64/cpu-feature-registers.txt | 6 +-
Documentation/arm64/elf_hwcaps.txt | 4 +
Documentation/arm64/sve.txt | 508 +++++++++++++++
arch/arm/include/asm/kvm_host.h | 3 +
arch/arm64/Kconfig | 12 +
arch/arm64/include/asm/cpu.h | 4 +
arch/arm64/include/asm/cpucaps.h | 3 +-
arch/arm64/include/asm/cpufeature.h | 42 ++
arch/arm64/include/asm/elf.h | 5 +
arch/arm64/include/asm/esr.h | 3 +-
arch/arm64/include/asm/fpsimd.h | 71 +-
arch/arm64/include/asm/fpsimdmacros.h | 148 +++++
arch/arm64/include/asm/kvm_arm.h | 5 +-
arch/arm64/include/asm/kvm_host.h | 11 +
arch/arm64/include/asm/processor.h | 10 +
arch/arm64/include/asm/sysreg.h | 24 +
arch/arm64/include/asm/thread_info.h | 5 +
arch/arm64/include/asm/traps.h | 2 +
arch/arm64/include/uapi/asm/auxvec.h | 3 +-
arch/arm64/include/uapi/asm/hwcap.h | 1 +
arch/arm64/include/uapi/asm/ptrace.h | 138 ++++
arch/arm64/include/uapi/asm/sigcontext.h | 120 +++-
arch/arm64/kernel/armv8_deprecated.c | 15 +-
arch/arm64/kernel/cpufeature.c | 99 ++-
arch/arm64/kernel/cpuinfo.c | 7 +
arch/arm64/kernel/entry-fpsimd.S | 17 +
arch/arm64/kernel/entry.S | 40 +-
arch/arm64/kernel/fpsimd.c | 907 +++++++++++++++++++++++++-
arch/arm64/kernel/head.S | 13 +-
arch/arm64/kernel/process.c | 24 +
arch/arm64/kernel/ptrace.c | 280 +++++++-
arch/arm64/kernel/signal.c | 220 ++++++-
arch/arm64/kernel/signal32.c | 2 +-
arch/arm64/kernel/traps.c | 7 +-
arch/arm64/kvm/handle_exit.c | 8 +
arch/arm64/kvm/hyp/switch.c | 12 +-
arch/arm64/kvm/sys_regs.c | 292 +++++++--
fs/binfmt_elf.c | 10 +-
include/linux/regset.h | 67 +-
include/uapi/linux/elf.h | 1 +
include/uapi/linux/prctl.h | 9 +
kernel/sys.c | 12 +
virt/kvm/arm/arm.c | 3 +
43 files changed, 3023 insertions(+), 150 deletions(-)
create mode 100644 Documentation/arm64/sve.txt
--
2.1.4
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2017-10-31 15:50 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:50 UTC (permalink / raw)
To: linux-arm-kernel
This series implements Linux kernel support for the ARM Scalable Vector
Extension (SVE). [1] It supersedes the previous v3: see [3] for link
and full cover letter.
This is a minor update to v4, but does contain a couple of important
fixes.
As in previous postings, the last two patches (here 29-30) are still
RFC and not proposed for merging at this time.
The patches apply on
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git
for-next/core
d7b1d22d3821 ("arm64: uapi: Remove PSR_Q_BIT")
To reduce spam, some people may not been copied on the entire series.
For those who did not receive the whole series, it can be found in the
linux-arm-kernel archive. [2]
See the individual patches for details of changes.
For reviewer convenience, a git tree is available. [4]
Since there are some changes against already-reviewed patches, I've also
pushed an unsquashed fixes tree for people to take a look at if it
helps. [5]
Summary:
* "regset: Add support for dynamically sized regsets" fixed to avoid
x86 breakage;
* one trival arm64 patch added to add asmlinkage annotations, and a
corresponding minor change to the Core task context handling patch;
* one new arm64 fix ("signal: Verify extra data is user-readable in
sys_rt_sigreturn") to ensure that access_ok() checks are done for the
whole extended signal frame, not just the base frame;
* one minor fix to the SVE sigreturn code to return consistent
intermediate error values (semantic correctness, non-functional
change);
* one minor change to call __copy_from_user() instead of
copy_from_user() in a situation where there is already an access_ok()
check;
[1] ARM Scalable Vector Extension
https://community.arm.com/groups/processors/blog/2016/08/22/technology-update-the-scalable-vector-extension-sve-for-the-armv8-a-architecture
[2] linux-arm-kernel October 2017 Archives by thread
http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/thread.html
[3] [PATCH v4 00/28] ARM Scalable Vector Extension (SVE)
http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/539414.html
[4] For review and testing only -- **do not pull**
(This branch has review changelogs which should not form part of
the final commits.)
v5 series (this posting)
http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v5
git://linux-arm.org/linux-dm.git sve/v5
[5] For review and testing only -- **do not pull**
(This branch has review changelogs which should not form part of
the final commits.)
v4 with unsquashed fixes
http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v4%2Bfixes
git://linux-arm.org/linux-dm.git sve/v4+fixes
Dave Martin (30):
regset: Add support for dynamically sized regsets
arm64: fpsimd: Correctly annotate exception helpers called from asm
arm64: signal: Verify extra data is user-readable in sys_rt_sigreturn
arm64: KVM: Hide unsupported AArch64 CPU features from guests
arm64: efi: Add missing Kconfig dependency on KERNEL_MODE_NEON
arm64: Port deprecated instruction emulation to new sysctl interface
arm64: fpsimd: Simplify uses of {set,clear}_ti_thread_flag()
arm64/sve: System register and exception syndrome definitions
arm64/sve: Low-level SVE architectural state manipulation functions
arm64/sve: Kconfig update and conditional compilation support
arm64/sve: Signal frame and context structure definition
arm64/sve: Low-level CPU setup
arm64/sve: Core task context handling
arm64/sve: Support vector length resetting for new processes
arm64/sve: Signal handling support
arm64/sve: Backend logic for setting the vector length
arm64: cpufeature: Move sys_caps_initialised declarations
arm64/sve: Probe SVE capabilities and usable vector lengths
arm64/sve: Preserve SVE registers around kernel-mode NEON use
arm64/sve: Preserve SVE registers around EFI runtime service calls
arm64/sve: ptrace and ELF coredump support
arm64/sve: Add prctl controls for userspace vector length management
arm64/sve: Add sysctl to set the default vector length for new
processes
arm64/sve: KVM: Prevent guests from using SVE
arm64/sve: KVM: Treat guest SVE use as undefined instruction execution
arm64/sve: KVM: Hide SVE from CPU features exposed to guests
arm64/sve: Detect SVE and activate runtime support
arm64/sve: Add documentation
arm64: signal: Report signal frame size to userspace via auxv
arm64/sve: signal: Include SVE when computing AT_MINSIGSTKSZ
Documentation/arm64/cpu-feature-registers.txt | 6 +-
Documentation/arm64/elf_hwcaps.txt | 4 +
Documentation/arm64/sve.txt | 508 +++++++++++++++
arch/arm/include/asm/kvm_host.h | 3 +
arch/arm64/Kconfig | 12 +
arch/arm64/include/asm/cpu.h | 4 +
arch/arm64/include/asm/cpucaps.h | 3 +-
arch/arm64/include/asm/cpufeature.h | 42 ++
arch/arm64/include/asm/elf.h | 5 +
arch/arm64/include/asm/esr.h | 3 +-
arch/arm64/include/asm/fpsimd.h | 71 +-
arch/arm64/include/asm/fpsimdmacros.h | 148 +++++
arch/arm64/include/asm/kvm_arm.h | 5 +-
arch/arm64/include/asm/kvm_host.h | 11 +
arch/arm64/include/asm/processor.h | 10 +
arch/arm64/include/asm/sysreg.h | 24 +
arch/arm64/include/asm/thread_info.h | 5 +
arch/arm64/include/asm/traps.h | 2 +
arch/arm64/include/uapi/asm/auxvec.h | 3 +-
arch/arm64/include/uapi/asm/hwcap.h | 1 +
arch/arm64/include/uapi/asm/ptrace.h | 138 ++++
arch/arm64/include/uapi/asm/sigcontext.h | 120 +++-
arch/arm64/kernel/armv8_deprecated.c | 15 +-
arch/arm64/kernel/cpufeature.c | 99 ++-
arch/arm64/kernel/cpuinfo.c | 7 +
arch/arm64/kernel/entry-fpsimd.S | 17 +
arch/arm64/kernel/entry.S | 40 +-
arch/arm64/kernel/fpsimd.c | 907 +++++++++++++++++++++++++-
arch/arm64/kernel/head.S | 13 +-
arch/arm64/kernel/process.c | 24 +
arch/arm64/kernel/ptrace.c | 280 +++++++-
arch/arm64/kernel/signal.c | 220 ++++++-
arch/arm64/kernel/signal32.c | 2 +-
arch/arm64/kernel/traps.c | 7 +-
arch/arm64/kvm/handle_exit.c | 8 +
arch/arm64/kvm/hyp/switch.c | 12 +-
arch/arm64/kvm/sys_regs.c | 292 +++++++--
fs/binfmt_elf.c | 10 +-
include/linux/regset.h | 67 +-
include/uapi/linux/elf.h | 1 +
include/uapi/linux/prctl.h | 9 +
kernel/sys.c | 12 +
virt/kvm/arm/arm.c | 3 +
43 files changed, 3023 insertions(+), 150 deletions(-)
create mode 100644 Documentation/arm64/sve.txt
--
2.1.4
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 01/30] regset: Add support for dynamically sized regsets
2017-10-31 15:50 ` Dave Martin
@ 2017-10-31 15:50 ` Dave Martin
-1 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:50 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch,
Oleg Nesterov, Alexander Viro, Thomas Gleixner, Ingo Molnar,
H. Peter Anvin, Dmitry Safonov, H. J. Lu
Currently the regset API doesn't allow for the possibility that
regsets (or at least, the amount of meaningful data in a regset)
may change in size.
In particular, this results in useless padding being added to
coredumps if a regset's current size is smaller than its
theoretical maximum size.
This patch adds a get_size() function to struct user_regset.
Individual regset implementations can implement this function to
return the current size of the regset data. A regset_size()
function is added to provide callers with an abstract interface for
determining the size of a regset without needing to know whether
the regset is dynamically sized or not.
The only affected user of this interface is the ELF coredump code:
This patch ports ELF coredump to dump regsets with their actual
size in the coredump. This has no effect except for new regsets
that are dynamically sized and provide a get_size() implementation.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: H. J. Lu <hjl.tools@gmail.com>
---
**Dropped** Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
**Dropped** Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
(due to bug fix applied against v4 of this patch.)
Changes since v4
----------------
* [bugfix] Due to some mis-renaming, the previous version of this
patch changed NT_PRFPREG dumping behaviour in some situations on
x86.
To reduce the scope for confusion, the local variable previously
named regset_size that was renamed (ambiguously) to size, is
renamed again, to regset0_size. This makes it clear exactly what
this variable is referring to. The reference to this variable
from inside the regset loop is fixed to point back to it.
---
fs/binfmt_elf.c | 10 ++++----
include/linux/regset.h | 67 ++++++++++++++++++++++++++++++++++++++++++++------
2 files changed, 65 insertions(+), 12 deletions(-)
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 73b01e4..c697882 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1699,7 +1699,7 @@ static int fill_thread_core_info(struct elf_thread_core_info *t,
long signr, size_t *total)
{
unsigned int i;
- unsigned int regset_size = view->regsets[0].n * view->regsets[0].size;
+ unsigned int regset0_size = regset_size(t->task, &view->regsets[0]);
/*
* NT_PRSTATUS is the one special case, because the regset data
@@ -1708,11 +1708,11 @@ static int fill_thread_core_info(struct elf_thread_core_info *t,
* We assume that regset 0 is NT_PRSTATUS.
*/
fill_prstatus(&t->prstatus, t->task, signr);
- (void) view->regsets[0].get(t->task, &view->regsets[0], 0, regset_size,
+ (void) view->regsets[0].get(t->task, &view->regsets[0], 0, regset0_size,
&t->prstatus.pr_reg, NULL);
fill_note(&t->notes[0], "CORE", NT_PRSTATUS,
- PRSTATUS_SIZE(t->prstatus, regset_size), &t->prstatus);
+ PRSTATUS_SIZE(t->prstatus, regset0_size), &t->prstatus);
*total += notesize(&t->notes[0]);
do_thread_regset_writeback(t->task, &view->regsets[0]);
@@ -1728,7 +1728,7 @@ static int fill_thread_core_info(struct elf_thread_core_info *t,
if (regset->core_note_type && regset->get &&
(!regset->active || regset->active(t->task, regset))) {
int ret;
- size_t size = regset->n * regset->size;
+ size_t size = regset_size(t->task, regset);
void *data = kmalloc(size, GFP_KERNEL);
if (unlikely(!data))
return 0;
@@ -1743,7 +1743,7 @@ static int fill_thread_core_info(struct elf_thread_core_info *t,
size, data);
else {
SET_PR_FPVALID(&t->prstatus,
- 1, regset_size);
+ 1, regset0_size);
fill_note(&t->notes[i], "CORE",
NT_PRFPREG, size, data);
}
diff --git a/include/linux/regset.h b/include/linux/regset.h
index 8e0c9fe..494ceda 100644
--- a/include/linux/regset.h
+++ b/include/linux/regset.h
@@ -107,6 +107,28 @@ typedef int user_regset_writeback_fn(struct task_struct *target,
int immediate);
/**
+ * user_regset_get_size_fn - type of @get_size function in &struct user_regset
+ * @target: thread being examined
+ * @regset: regset being examined
+ *
+ * This call is optional; usually the pointer is %NULL.
+ *
+ * When provided, this function must return the current size of regset
+ * data, as observed by the @get function in &struct user_regset. The
+ * value returned must be a multiple of @size. The returned size is
+ * required to be valid only until the next time (if any) @regset is
+ * modified for @target.
+ *
+ * This function is intended for dynamically sized regsets. A regset
+ * that is statically sized does not need to implement it.
+ *
+ * This function should not be called directly: instead, callers should
+ * call regset_size() to determine the current size of a regset.
+ */
+typedef unsigned int user_regset_get_size_fn(struct task_struct *target,
+ const struct user_regset *regset);
+
+/**
* struct user_regset - accessible thread CPU state
* @n: Number of slots (registers).
* @size: Size in bytes of a slot (register).
@@ -117,19 +139,33 @@ typedef int user_regset_writeback_fn(struct task_struct *target,
* @set: Function to store values.
* @active: Function to report if regset is active, or %NULL.
* @writeback: Function to write data back to user memory, or %NULL.
+ * @get_size: Function to return the regset's size, or %NULL.
*
* This data structure describes a machine resource we call a register set.
* This is part of the state of an individual thread, not necessarily
* actual CPU registers per se. A register set consists of a number of
* similar slots, given by @n. Each slot is @size bytes, and aligned to
- * @align bytes (which is at least @size).
+ * @align bytes (which is at least @size). For dynamically-sized
+ * regsets, @n must contain the maximum possible number of slots for the
+ * regset, and @get_size must point to a function that returns the
+ * current regset size.
*
- * These functions must be called only on the current thread or on a
- * thread that is in %TASK_STOPPED or %TASK_TRACED state, that we are
- * guaranteed will not be woken up and return to user mode, and that we
- * have called wait_task_inactive() on. (The target thread always might
- * wake up for SIGKILL while these functions are working, in which case
- * that thread's user_regset state might be scrambled.)
+ * Callers that need to know only the current size of the regset and do
+ * not care about its internal structure should call regset_size()
+ * instead of inspecting @n or calling @get_size.
+ *
+ * For backward compatibility, the @get and @set methods must pad to, or
+ * accept, @n * @size bytes, even if the current regset size is smaller.
+ * The precise semantics of these operations depend on the regset being
+ * accessed.
+ *
+ * The functions to which &struct user_regset members point must be
+ * called only on the current thread or on a thread that is in
+ * %TASK_STOPPED or %TASK_TRACED state, that we are guaranteed will not
+ * be woken up and return to user mode, and that we have called
+ * wait_task_inactive() on. (The target thread always might wake up for
+ * SIGKILL while these functions are working, in which case that
+ * thread's user_regset state might be scrambled.)
*
* The @pos argument must be aligned according to @align; the @count
* argument must be a multiple of @size. These functions are not
@@ -156,6 +192,7 @@ struct user_regset {
user_regset_set_fn *set;
user_regset_active_fn *active;
user_regset_writeback_fn *writeback;
+ user_regset_get_size_fn *get_size;
unsigned int n;
unsigned int size;
unsigned int align;
@@ -371,5 +408,21 @@ static inline int copy_regset_from_user(struct task_struct *target,
return regset->set(target, regset, offset, size, NULL, data);
}
+/**
+ * regset_size - determine the current size of a regset
+ * @target: thread to be examined
+ * @regset: regset to be examined
+ *
+ * Note that the returned size is valid only until the next time
+ * (if any) @regset is modified for @target.
+ */
+static inline unsigned int regset_size(struct task_struct *target,
+ const struct user_regset *regset)
+{
+ if (!regset->get_size)
+ return regset->n * regset->size;
+ else
+ return regset->get_size(target, regset);
+}
#endif /* <linux/regset.h> */
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 01/30] regset: Add support for dynamically sized regsets
@ 2017-10-31 15:50 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:50 UTC (permalink / raw)
To: linux-arm-kernel
Currently the regset API doesn't allow for the possibility that
regsets (or at least, the amount of meaningful data in a regset)
may change in size.
In particular, this results in useless padding being added to
coredumps if a regset's current size is smaller than its
theoretical maximum size.
This patch adds a get_size() function to struct user_regset.
Individual regset implementations can implement this function to
return the current size of the regset data. A regset_size()
function is added to provide callers with an abstract interface for
determining the size of a regset without needing to know whether
the regset is dynamically sized or not.
The only affected user of this interface is the ELF coredump code:
This patch ports ELF coredump to dump regsets with their actual
size in the coredump. This has no effect except for new regsets
that are dynamically sized and provide a get_size() implementation.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: H. J. Lu <hjl.tools@gmail.com>
---
**Dropped** Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
**Dropped** Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
(due to bug fix applied against v4 of this patch.)
Changes since v4
----------------
* [bugfix] Due to some mis-renaming, the previous version of this
patch changed NT_PRFPREG dumping behaviour in some situations on
x86.
To reduce the scope for confusion, the local variable previously
named regset_size that was renamed (ambiguously) to size, is
renamed again, to regset0_size. This makes it clear exactly what
this variable is referring to. The reference to this variable
from inside the regset loop is fixed to point back to it.
---
fs/binfmt_elf.c | 10 ++++----
include/linux/regset.h | 67 ++++++++++++++++++++++++++++++++++++++++++++------
2 files changed, 65 insertions(+), 12 deletions(-)
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 73b01e4..c697882 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1699,7 +1699,7 @@ static int fill_thread_core_info(struct elf_thread_core_info *t,
long signr, size_t *total)
{
unsigned int i;
- unsigned int regset_size = view->regsets[0].n * view->regsets[0].size;
+ unsigned int regset0_size = regset_size(t->task, &view->regsets[0]);
/*
* NT_PRSTATUS is the one special case, because the regset data
@@ -1708,11 +1708,11 @@ static int fill_thread_core_info(struct elf_thread_core_info *t,
* We assume that regset 0 is NT_PRSTATUS.
*/
fill_prstatus(&t->prstatus, t->task, signr);
- (void) view->regsets[0].get(t->task, &view->regsets[0], 0, regset_size,
+ (void) view->regsets[0].get(t->task, &view->regsets[0], 0, regset0_size,
&t->prstatus.pr_reg, NULL);
fill_note(&t->notes[0], "CORE", NT_PRSTATUS,
- PRSTATUS_SIZE(t->prstatus, regset_size), &t->prstatus);
+ PRSTATUS_SIZE(t->prstatus, regset0_size), &t->prstatus);
*total += notesize(&t->notes[0]);
do_thread_regset_writeback(t->task, &view->regsets[0]);
@@ -1728,7 +1728,7 @@ static int fill_thread_core_info(struct elf_thread_core_info *t,
if (regset->core_note_type && regset->get &&
(!regset->active || regset->active(t->task, regset))) {
int ret;
- size_t size = regset->n * regset->size;
+ size_t size = regset_size(t->task, regset);
void *data = kmalloc(size, GFP_KERNEL);
if (unlikely(!data))
return 0;
@@ -1743,7 +1743,7 @@ static int fill_thread_core_info(struct elf_thread_core_info *t,
size, data);
else {
SET_PR_FPVALID(&t->prstatus,
- 1, regset_size);
+ 1, regset0_size);
fill_note(&t->notes[i], "CORE",
NT_PRFPREG, size, data);
}
diff --git a/include/linux/regset.h b/include/linux/regset.h
index 8e0c9fe..494ceda 100644
--- a/include/linux/regset.h
+++ b/include/linux/regset.h
@@ -107,6 +107,28 @@ typedef int user_regset_writeback_fn(struct task_struct *target,
int immediate);
/**
+ * user_regset_get_size_fn - type of @get_size function in &struct user_regset
+ * @target: thread being examined
+ * @regset: regset being examined
+ *
+ * This call is optional; usually the pointer is %NULL.
+ *
+ * When provided, this function must return the current size of regset
+ * data, as observed by the @get function in &struct user_regset. The
+ * value returned must be a multiple of @size. The returned size is
+ * required to be valid only until the next time (if any) @regset is
+ * modified for @target.
+ *
+ * This function is intended for dynamically sized regsets. A regset
+ * that is statically sized does not need to implement it.
+ *
+ * This function should not be called directly: instead, callers should
+ * call regset_size() to determine the current size of a regset.
+ */
+typedef unsigned int user_regset_get_size_fn(struct task_struct *target,
+ const struct user_regset *regset);
+
+/**
* struct user_regset - accessible thread CPU state
* @n: Number of slots (registers).
* @size: Size in bytes of a slot (register).
@@ -117,19 +139,33 @@ typedef int user_regset_writeback_fn(struct task_struct *target,
* @set: Function to store values.
* @active: Function to report if regset is active, or %NULL.
* @writeback: Function to write data back to user memory, or %NULL.
+ * @get_size: Function to return the regset's size, or %NULL.
*
* This data structure describes a machine resource we call a register set.
* This is part of the state of an individual thread, not necessarily
* actual CPU registers per se. A register set consists of a number of
* similar slots, given by @n. Each slot is @size bytes, and aligned to
- * @align bytes (which is at least @size).
+ * @align bytes (which is at least @size). For dynamically-sized
+ * regsets, @n must contain the maximum possible number of slots for the
+ * regset, and @get_size must point to a function that returns the
+ * current regset size.
*
- * These functions must be called only on the current thread or on a
- * thread that is in %TASK_STOPPED or %TASK_TRACED state, that we are
- * guaranteed will not be woken up and return to user mode, and that we
- * have called wait_task_inactive() on. (The target thread always might
- * wake up for SIGKILL while these functions are working, in which case
- * that thread's user_regset state might be scrambled.)
+ * Callers that need to know only the current size of the regset and do
+ * not care about its internal structure should call regset_size()
+ * instead of inspecting @n or calling @get_size.
+ *
+ * For backward compatibility, the @get and @set methods must pad to, or
+ * accept, @n * @size bytes, even if the current regset size is smaller.
+ * The precise semantics of these operations depend on the regset being
+ * accessed.
+ *
+ * The functions to which &struct user_regset members point must be
+ * called only on the current thread or on a thread that is in
+ * %TASK_STOPPED or %TASK_TRACED state, that we are guaranteed will not
+ * be woken up and return to user mode, and that we have called
+ * wait_task_inactive() on. (The target thread always might wake up for
+ * SIGKILL while these functions are working, in which case that
+ * thread's user_regset state might be scrambled.)
*
* The @pos argument must be aligned according to @align; the @count
* argument must be a multiple of @size. These functions are not
@@ -156,6 +192,7 @@ struct user_regset {
user_regset_set_fn *set;
user_regset_active_fn *active;
user_regset_writeback_fn *writeback;
+ user_regset_get_size_fn *get_size;
unsigned int n;
unsigned int size;
unsigned int align;
@@ -371,5 +408,21 @@ static inline int copy_regset_from_user(struct task_struct *target,
return regset->set(target, regset, offset, size, NULL, data);
}
+/**
+ * regset_size - determine the current size of a regset
+ * @target: thread to be examined
+ * @regset: regset to be examined
+ *
+ * Note that the returned size is valid only until the next time
+ * (if any) @regset is modified for @target.
+ */
+static inline unsigned int regset_size(struct task_struct *target,
+ const struct user_regset *regset)
+{
+ if (!regset->get_size)
+ return regset->n * regset->size;
+ else
+ return regset->get_size(target, regset);
+}
#endif /* <linux/regset.h> */
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 02/30] arm64: fpsimd: Correctly annotate exception helpers called from asm
@ 2017-10-31 15:50 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:50 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-arch, Okamoto Takayuki, libc-alpha, Ard Biesheuvel,
Szabolcs Nagy, Catalin Marinas, Will Deacon, kvmarm
A couple of FPSIMD exception handling functions that are called
from entry.S are currently not annotated as such.
This is not a big deal since asmlinkage does nothing on arm/arm64,
but fixing the annotations is more consistent and may help avoid
future surprises.
This patch adds appropriate asmlinkage annotations for
do_fpsimd_acc() and do_fpsimd_exc().
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
---
arch/arm64/kernel/fpsimd.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 5d547de..e851faa19 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -21,6 +21,7 @@
#include <linux/cpu.h>
#include <linux/cpu_pm.h>
#include <linux/kernel.h>
+#include <linux/linkage.h>
#include <linux/init.h>
#include <linux/percpu.h>
#include <linux/preempt.h>
@@ -102,7 +103,7 @@ static DEFINE_PER_CPU(struct fpsimd_state *, fpsimd_last_state);
/*
* Trapped FP/ASIMD access.
*/
-void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs)
+asmlinkage void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs)
{
/* TODO: implement lazy context saving/restoring */
WARN_ON(1);
@@ -111,7 +112,7 @@ void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs)
/*
* Raise a SIGFPE for the current process.
*/
-void do_fpsimd_exc(unsigned int esr, struct pt_regs *regs)
+asmlinkage void do_fpsimd_exc(unsigned int esr, struct pt_regs *regs)
{
siginfo_t info;
unsigned int si_code = 0;
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 02/30] arm64: fpsimd: Correctly annotate exception helpers called from asm
@ 2017-10-31 15:50 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:50 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
A couple of FPSIMD exception handling functions that are called
from entry.S are currently not annotated as such.
This is not a big deal since asmlinkage does nothing on arm/arm64,
but fixing the annotations is more consistent and may help avoid
future surprises.
This patch adds appropriate asmlinkage annotations for
do_fpsimd_acc() and do_fpsimd_exc().
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
---
arch/arm64/kernel/fpsimd.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 5d547de..e851faa19 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -21,6 +21,7 @@
#include <linux/cpu.h>
#include <linux/cpu_pm.h>
#include <linux/kernel.h>
+#include <linux/linkage.h>
#include <linux/init.h>
#include <linux/percpu.h>
#include <linux/preempt.h>
@@ -102,7 +103,7 @@ static DEFINE_PER_CPU(struct fpsimd_state *, fpsimd_last_state);
/*
* Trapped FP/ASIMD access.
*/
-void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs)
+asmlinkage void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs)
{
/* TODO: implement lazy context saving/restoring */
WARN_ON(1);
@@ -111,7 +112,7 @@ void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs)
/*
* Raise a SIGFPE for the current process.
*/
-void do_fpsimd_exc(unsigned int esr, struct pt_regs *regs)
+asmlinkage void do_fpsimd_exc(unsigned int esr, struct pt_regs *regs)
{
siginfo_t info;
unsigned int si_code = 0;
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 02/30] arm64: fpsimd: Correctly annotate exception helpers called from asm
@ 2017-10-31 15:50 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:50 UTC (permalink / raw)
To: linux-arm-kernel
A couple of FPSIMD exception handling functions that are called
from entry.S are currently not annotated as such.
This is not a big deal since asmlinkage does nothing on arm/arm64,
but fixing the annotations is more consistent and may help avoid
future surprises.
This patch adds appropriate asmlinkage annotations for
do_fpsimd_acc() and do_fpsimd_exc().
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
---
arch/arm64/kernel/fpsimd.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 5d547de..e851faa19 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -21,6 +21,7 @@
#include <linux/cpu.h>
#include <linux/cpu_pm.h>
#include <linux/kernel.h>
+#include <linux/linkage.h>
#include <linux/init.h>
#include <linux/percpu.h>
#include <linux/preempt.h>
@@ -102,7 +103,7 @@ static DEFINE_PER_CPU(struct fpsimd_state *, fpsimd_last_state);
/*
* Trapped FP/ASIMD access.
*/
-void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs)
+asmlinkage void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs)
{
/* TODO: implement lazy context saving/restoring */
WARN_ON(1);
@@ -111,7 +112,7 @@ void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs)
/*
* Raise a SIGFPE for the current process.
*/
-void do_fpsimd_exc(unsigned int esr, struct pt_regs *regs)
+asmlinkage void do_fpsimd_exc(unsigned int esr, struct pt_regs *regs)
{
siginfo_t info;
unsigned int si_code = 0;
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 03/30] arm64: signal: Verify extra data is user-readable in sys_rt_sigreturn
@ 2017-10-31 15:50 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:50 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-arch, Okamoto Takayuki, libc-alpha, Ard Biesheuvel,
Szabolcs Nagy, Catalin Marinas, Will Deacon, kvmarm
Currently sys_rt_sigreturn() verifies that the base sigframe is
readable, but no similar check is performed on the extra data to
which an extra_context record points.
This matters because the extra data will be read with the
unprotected user accessors. However, this is not a problem at
present because the extra data base address is required to be
exactly at the end of the base sigframe. So, there would need to
be a non-user-readable kernel address within about 59K
(SIGFRAME_MAXSZ - sizeof(struct rt_sigframe)) of some address for
which access_ok(VERIFY_READ) returns true, in order for sigreturn
to be able to read kernel memory that should be inaccessible to the
user task. This is currently impossible due to the untranslatable
address hole between the TTBR0 and TTBR1 address ranges.
Disappearance of the hole between the TTBR0 and TTBR1 mapping
ranges would require the VA size for TTBR0 and TTBR1 to grow to at
least 55 bits, and either the disabling of tagged pointers for
userspace or enabling of tagged pointers for kernel space; none of
which is currently envisaged.
Even so, it is wrong to use the unprotected user accessors without
an accompanying access_ok() check.
To avoid the potential for future surprises, this patch does an
explicit access_ok() check on the extra data space when parsing an
extra_context record.
Fixes: 33f082614c34 ("arm64: signal: Allow expansion of the signal frame")
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
---
arch/arm64/kernel/signal.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 0bdc96c..4716729 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -343,6 +343,10 @@ static int parse_user_sigframe(struct user_ctxs *user,
*/
offset = 0;
limit = extra_size;
+
+ if (!access_ok(VERIFY_READ, base, limit))
+ goto invalid;
+
continue;
default:
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 03/30] arm64: signal: Verify extra data is user-readable in sys_rt_sigreturn
@ 2017-10-31 15:50 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:50 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
Currently sys_rt_sigreturn() verifies that the base sigframe is
readable, but no similar check is performed on the extra data to
which an extra_context record points.
This matters because the extra data will be read with the
unprotected user accessors. However, this is not a problem at
present because the extra data base address is required to be
exactly at the end of the base sigframe. So, there would need to
be a non-user-readable kernel address within about 59K
(SIGFRAME_MAXSZ - sizeof(struct rt_sigframe)) of some address for
which access_ok(VERIFY_READ) returns true, in order for sigreturn
to be able to read kernel memory that should be inaccessible to the
user task. This is currently impossible due to the untranslatable
address hole between the TTBR0 and TTBR1 address ranges.
Disappearance of the hole between the TTBR0 and TTBR1 mapping
ranges would require the VA size for TTBR0 and TTBR1 to grow to at
least 55 bits, and either the disabling of tagged pointers for
userspace or enabling of tagged pointers for kernel space; none of
which is currently envisaged.
Even so, it is wrong to use the unprotected user accessors without
an accompanying access_ok() check.
To avoid the potential for future surprises, this patch does an
explicit access_ok() check on the extra data space when parsing an
extra_context record.
Fixes: 33f082614c34 ("arm64: signal: Allow expansion of the signal frame")
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
---
arch/arm64/kernel/signal.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 0bdc96c..4716729 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -343,6 +343,10 @@ static int parse_user_sigframe(struct user_ctxs *user,
*/
offset = 0;
limit = extra_size;
+
+ if (!access_ok(VERIFY_READ, base, limit))
+ goto invalid;
+
continue;
default:
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 03/30] arm64: signal: Verify extra data is user-readable in sys_rt_sigreturn
@ 2017-10-31 15:50 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:50 UTC (permalink / raw)
To: linux-arm-kernel
Currently sys_rt_sigreturn() verifies that the base sigframe is
readable, but no similar check is performed on the extra data to
which an extra_context record points.
This matters because the extra data will be read with the
unprotected user accessors. However, this is not a problem at
present because the extra data base address is required to be
exactly at the end of the base sigframe. So, there would need to
be a non-user-readable kernel address within about 59K
(SIGFRAME_MAXSZ - sizeof(struct rt_sigframe)) of some address for
which access_ok(VERIFY_READ) returns true, in order for sigreturn
to be able to read kernel memory that should be inaccessible to the
user task. This is currently impossible due to the untranslatable
address hole between the TTBR0 and TTBR1 address ranges.
Disappearance of the hole between the TTBR0 and TTBR1 mapping
ranges would require the VA size for TTBR0 and TTBR1 to grow to at
least 55 bits, and either the disabling of tagged pointers for
userspace or enabling of tagged pointers for kernel space; none of
which is currently envisaged.
Even so, it is wrong to use the unprotected user accessors without
an accompanying access_ok() check.
To avoid the potential for future surprises, this patch does an
explicit access_ok() check on the extra data space when parsing an
extra_context record.
Fixes: 33f082614c34 ("arm64: signal: Allow expansion of the signal frame")
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
---
arch/arm64/kernel/signal.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 0bdc96c..4716729 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -343,6 +343,10 @@ static int parse_user_sigframe(struct user_ctxs *user,
*/
offset = 0;
limit = extra_size;
+
+ if (!access_ok(VERIFY_READ, base, limit))
+ goto invalid;
+
continue;
default:
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 04/30] arm64: KVM: Hide unsupported AArch64 CPU features from guests
2017-10-31 15:50 ` Dave Martin
@ 2017-10-31 15:50 ` Dave Martin
-1 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:50 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch,
Christoffer Dall
Currently, a guest kernel sees the true CPU feature registers
(ID_*_EL1) when it reads them using MRS instructions. This means
that the guest may observe features that are present in the
hardware but the host doesn't understand or doesn't provide support
for. A guest may legimitately try to use such a feature as per the
architecture, but use of the feature may trap instead of working
normally, triggering undef injection into the guest.
This is not a problem for the host, but the guest may go wrong when
running on newer hardware than the host knows about.
This patch hides from guest VMs any AArch64-specific CPU features
that the host doesn't support, by exposing to the guest the
sanitised versions of the registers computed by the cpufeatures
framework, instead of the true hardware registers. To achieve
this, HCR_EL2.TID3 is now set for AArch64 guests, and emulation
code is added to KVM to report the sanitised versions of the
affected registers in response to MRS and register reads from
userspace.
The affected registers are removed from invariant_sys_regs[] (since
the invariant_sys_regs handling is no longer quite correct for
them) and added to sys_reg_desgs[], with appropriate access(),
get_user() and set_user() methods. No runtime vcpu storage is
allocated for the registers: instead, they are read on demand from
the cpufeatures framework. This may need modification in the
future if there is a need for userspace to customise the features
visible to the guest.
Attempts by userspace to write the registers are handled similarly
to the current invariant_sys_regs handling: writes are permitted,
but only if they don't attempt to change the value. This is
sufficient to support VM snapshot/restore from userspace.
Because of the additional registers, restoring a VM on an older
kernel may not work unless userspace knows how to handle the extra
VM registers exposed to the KVM user ABI by this patch.
Under the principle of least damage, this patch makes no attempt to
handle any of the other registers currently in
invariant_sys_regs[], or to emulate registers for AArch32: however,
these could be handled in a similar way in future, as necessary.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
---
arch/arm64/include/asm/sysreg.h | 3 +
arch/arm64/kvm/hyp/switch.c | 6 +
arch/arm64/kvm/sys_regs.c | 282 +++++++++++++++++++++++++++++++++-------
3 files changed, 246 insertions(+), 45 deletions(-)
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 4dceb12..609d59af 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -149,6 +149,9 @@
#define SYS_ID_AA64DFR0_EL1 sys_reg(3, 0, 0, 5, 0)
#define SYS_ID_AA64DFR1_EL1 sys_reg(3, 0, 0, 5, 1)
+#define SYS_ID_AA64AFR0_EL1 sys_reg(3, 0, 0, 5, 4)
+#define SYS_ID_AA64AFR1_EL1 sys_reg(3, 0, 0, 5, 5)
+
#define SYS_ID_AA64ISAR0_EL1 sys_reg(3, 0, 0, 6, 0)
#define SYS_ID_AA64ISAR1_EL1 sys_reg(3, 0, 0, 6, 1)
diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
index 945e79c..35a90b8 100644
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -81,11 +81,17 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu)
* it will cause an exception.
*/
val = vcpu->arch.hcr_el2;
+
if (!(val & HCR_RW) && system_supports_fpsimd()) {
write_sysreg(1 << 30, fpexc32_el2);
isb();
}
+
+ if (val & HCR_RW) /* for AArch64 only: */
+ val |= HCR_TID3; /* TID3: trap feature register accesses */
+
write_sysreg(val, hcr_el2);
+
/* Trap on AArch32 cp15 c15 accesses (EL1 or EL0) */
write_sysreg(1 << 15, hstr_el2);
/*
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 2e070d3..b1f7552 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -892,6 +892,137 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
return true;
}
+/* Read a sanitised cpufeature ID register by sys_reg_desc */
+static u64 read_id_reg(struct sys_reg_desc const *r, bool raz)
+{
+ u32 id = sys_reg((u32)r->Op0, (u32)r->Op1,
+ (u32)r->CRn, (u32)r->CRm, (u32)r->Op2);
+
+ return raz ? 0 : read_sanitised_ftr_reg(id);
+}
+
+/* cpufeature ID register access trap handlers */
+
+static bool __access_id_reg(struct kvm_vcpu *vcpu,
+ struct sys_reg_params *p,
+ const struct sys_reg_desc *r,
+ bool raz)
+{
+ if (p->is_write)
+ return write_to_read_only(vcpu, p, r);
+
+ p->regval = read_id_reg(r, raz);
+ return true;
+}
+
+static bool access_id_reg(struct kvm_vcpu *vcpu,
+ struct sys_reg_params *p,
+ const struct sys_reg_desc *r)
+{
+ return __access_id_reg(vcpu, p, r, false);
+}
+
+static bool access_raz_id_reg(struct kvm_vcpu *vcpu,
+ struct sys_reg_params *p,
+ const struct sys_reg_desc *r)
+{
+ return __access_id_reg(vcpu, p, r, true);
+}
+
+static int reg_from_user(u64 *val, const void __user *uaddr, u64 id);
+static int reg_to_user(void __user *uaddr, const u64 *val, u64 id);
+static u64 sys_reg_to_index(const struct sys_reg_desc *reg);
+
+/*
+ * cpufeature ID register user accessors
+ *
+ * For now, these registers are immutable for userspace, so no values
+ * are stored, and for set_id_reg() we don't allow the effective value
+ * to be changed.
+ */
+static int __get_id_reg(const struct sys_reg_desc *rd, void __user *uaddr,
+ bool raz)
+{
+ const u64 id = sys_reg_to_index(rd);
+ const u64 val = read_id_reg(rd, raz);
+
+ return reg_to_user(uaddr, &val, id);
+}
+
+static int __set_id_reg(const struct sys_reg_desc *rd, void __user *uaddr,
+ bool raz)
+{
+ const u64 id = sys_reg_to_index(rd);
+ int err;
+ u64 val;
+
+ err = reg_from_user(&val, uaddr, id);
+ if (err)
+ return err;
+
+ /* This is what we mean by invariant: you can't change it. */
+ if (val != read_id_reg(rd, raz))
+ return -EINVAL;
+
+ return 0;
+}
+
+static int get_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+ const struct kvm_one_reg *reg, void __user *uaddr)
+{
+ return __get_id_reg(rd, uaddr, false);
+}
+
+static int set_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+ const struct kvm_one_reg *reg, void __user *uaddr)
+{
+ return __set_id_reg(rd, uaddr, false);
+}
+
+static int get_raz_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+ const struct kvm_one_reg *reg, void __user *uaddr)
+{
+ return __get_id_reg(rd, uaddr, true);
+}
+
+static int set_raz_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+ const struct kvm_one_reg *reg, void __user *uaddr)
+{
+ return __set_id_reg(rd, uaddr, true);
+}
+
+/* sys_reg_desc initialiser for known cpufeature ID registers */
+#define ID_SANITISED(name) { \
+ SYS_DESC(SYS_##name), \
+ .access = access_id_reg, \
+ .get_user = get_id_reg, \
+ .set_user = set_id_reg, \
+}
+
+/*
+ * sys_reg_desc initialiser for architecturally unallocated cpufeature ID
+ * register with encoding Op0=3, Op1=0, CRn=0, CRm=crm, Op2=op2
+ * (1 <= crm < 8, 0 <= Op2 < 8).
+ */
+#define ID_UNALLOCATED(crm, op2) { \
+ Op0(3), Op1(0), CRn(0), CRm(crm), Op2(op2), \
+ .access = access_raz_id_reg, \
+ .get_user = get_raz_id_reg, \
+ .set_user = set_raz_id_reg, \
+}
+
+/*
+ * sys_reg_desc initialiser for known ID registers that we hide from guests.
+ * For now, these are exposed just like unallocated ID regs: they appear
+ * RAZ for the guest.
+ */
+#define ID_HIDDEN(name) { \
+ SYS_DESC(SYS_##name), \
+ .access = access_raz_id_reg, \
+ .get_user = get_raz_id_reg, \
+ .set_user = set_raz_id_reg, \
+}
+
/*
* Architected system registers.
* Important: Must be sorted ascending by Op0, Op1, CRn, CRm, Op2
@@ -944,6 +1075,84 @@ static const struct sys_reg_desc sys_reg_descs[] = {
{ SYS_DESC(SYS_DBGVCR32_EL2), NULL, reset_val, DBGVCR32_EL2, 0 },
{ SYS_DESC(SYS_MPIDR_EL1), NULL, reset_mpidr, MPIDR_EL1 },
+
+ /*
+ * ID regs: all ID_SANITISED() entries here must have corresponding
+ * entries in arm64_ftr_regs[].
+ */
+
+ /* AArch64 mappings of the AArch32 ID registers */
+ /* CRm=1 */
+ ID_SANITISED(ID_PFR0_EL1),
+ ID_SANITISED(ID_PFR1_EL1),
+ ID_SANITISED(ID_DFR0_EL1),
+ ID_HIDDEN(ID_AFR0_EL1),
+ ID_SANITISED(ID_MMFR0_EL1),
+ ID_SANITISED(ID_MMFR1_EL1),
+ ID_SANITISED(ID_MMFR2_EL1),
+ ID_SANITISED(ID_MMFR3_EL1),
+
+ /* CRm=2 */
+ ID_SANITISED(ID_ISAR0_EL1),
+ ID_SANITISED(ID_ISAR1_EL1),
+ ID_SANITISED(ID_ISAR2_EL1),
+ ID_SANITISED(ID_ISAR3_EL1),
+ ID_SANITISED(ID_ISAR4_EL1),
+ ID_SANITISED(ID_ISAR5_EL1),
+ ID_SANITISED(ID_MMFR4_EL1),
+ ID_UNALLOCATED(2,7),
+
+ /* CRm=3 */
+ ID_SANITISED(MVFR0_EL1),
+ ID_SANITISED(MVFR1_EL1),
+ ID_SANITISED(MVFR2_EL1),
+ ID_UNALLOCATED(3,3),
+ ID_UNALLOCATED(3,4),
+ ID_UNALLOCATED(3,5),
+ ID_UNALLOCATED(3,6),
+ ID_UNALLOCATED(3,7),
+
+ /* AArch64 ID registers */
+ /* CRm=4 */
+ ID_SANITISED(ID_AA64PFR0_EL1),
+ ID_SANITISED(ID_AA64PFR1_EL1),
+ ID_UNALLOCATED(4,2),
+ ID_UNALLOCATED(4,3),
+ ID_UNALLOCATED(4,4),
+ ID_UNALLOCATED(4,5),
+ ID_UNALLOCATED(4,6),
+ ID_UNALLOCATED(4,7),
+
+ /* CRm=5 */
+ ID_SANITISED(ID_AA64DFR0_EL1),
+ ID_SANITISED(ID_AA64DFR1_EL1),
+ ID_UNALLOCATED(5,2),
+ ID_UNALLOCATED(5,3),
+ ID_HIDDEN(ID_AA64AFR0_EL1),
+ ID_HIDDEN(ID_AA64AFR1_EL1),
+ ID_UNALLOCATED(5,6),
+ ID_UNALLOCATED(5,7),
+
+ /* CRm=6 */
+ ID_SANITISED(ID_AA64ISAR0_EL1),
+ ID_SANITISED(ID_AA64ISAR1_EL1),
+ ID_UNALLOCATED(6,2),
+ ID_UNALLOCATED(6,3),
+ ID_UNALLOCATED(6,4),
+ ID_UNALLOCATED(6,5),
+ ID_UNALLOCATED(6,6),
+ ID_UNALLOCATED(6,7),
+
+ /* CRm=7 */
+ ID_SANITISED(ID_AA64MMFR0_EL1),
+ ID_SANITISED(ID_AA64MMFR1_EL1),
+ ID_SANITISED(ID_AA64MMFR2_EL1),
+ ID_UNALLOCATED(7,3),
+ ID_UNALLOCATED(7,4),
+ ID_UNALLOCATED(7,5),
+ ID_UNALLOCATED(7,6),
+ ID_UNALLOCATED(7,7),
+
{ SYS_DESC(SYS_SCTLR_EL1), access_vm_reg, reset_val, SCTLR_EL1, 0x00C50078 },
{ SYS_DESC(SYS_CPACR_EL1), NULL, reset_val, CPACR_EL1, 0 },
{ SYS_DESC(SYS_TTBR0_EL1), access_vm_reg, reset_unknown, TTBR0_EL1 },
@@ -1790,8 +1999,8 @@ static const struct sys_reg_desc *index_to_sys_reg_desc(struct kvm_vcpu *vcpu,
if (!r)
r = find_reg(¶ms, sys_reg_descs, ARRAY_SIZE(sys_reg_descs));
- /* Not saved in the sys_reg array? */
- if (r && !r->reg)
+ /* Not saved in the sys_reg array and not otherwise accessible? */
+ if (r && !(r->reg || r->get_user))
r = NULL;
return r;
@@ -1815,20 +2024,6 @@ static const struct sys_reg_desc *index_to_sys_reg_desc(struct kvm_vcpu *vcpu,
FUNCTION_INVARIANT(midr_el1)
FUNCTION_INVARIANT(ctr_el0)
FUNCTION_INVARIANT(revidr_el1)
-FUNCTION_INVARIANT(id_pfr0_el1)
-FUNCTION_INVARIANT(id_pfr1_el1)
-FUNCTION_INVARIANT(id_dfr0_el1)
-FUNCTION_INVARIANT(id_afr0_el1)
-FUNCTION_INVARIANT(id_mmfr0_el1)
-FUNCTION_INVARIANT(id_mmfr1_el1)
-FUNCTION_INVARIANT(id_mmfr2_el1)
-FUNCTION_INVARIANT(id_mmfr3_el1)
-FUNCTION_INVARIANT(id_isar0_el1)
-FUNCTION_INVARIANT(id_isar1_el1)
-FUNCTION_INVARIANT(id_isar2_el1)
-FUNCTION_INVARIANT(id_isar3_el1)
-FUNCTION_INVARIANT(id_isar4_el1)
-FUNCTION_INVARIANT(id_isar5_el1)
FUNCTION_INVARIANT(clidr_el1)
FUNCTION_INVARIANT(aidr_el1)
@@ -1836,20 +2031,6 @@ FUNCTION_INVARIANT(aidr_el1)
static struct sys_reg_desc invariant_sys_regs[] = {
{ SYS_DESC(SYS_MIDR_EL1), NULL, get_midr_el1 },
{ SYS_DESC(SYS_REVIDR_EL1), NULL, get_revidr_el1 },
- { SYS_DESC(SYS_ID_PFR0_EL1), NULL, get_id_pfr0_el1 },
- { SYS_DESC(SYS_ID_PFR1_EL1), NULL, get_id_pfr1_el1 },
- { SYS_DESC(SYS_ID_DFR0_EL1), NULL, get_id_dfr0_el1 },
- { SYS_DESC(SYS_ID_AFR0_EL1), NULL, get_id_afr0_el1 },
- { SYS_DESC(SYS_ID_MMFR0_EL1), NULL, get_id_mmfr0_el1 },
- { SYS_DESC(SYS_ID_MMFR1_EL1), NULL, get_id_mmfr1_el1 },
- { SYS_DESC(SYS_ID_MMFR2_EL1), NULL, get_id_mmfr2_el1 },
- { SYS_DESC(SYS_ID_MMFR3_EL1), NULL, get_id_mmfr3_el1 },
- { SYS_DESC(SYS_ID_ISAR0_EL1), NULL, get_id_isar0_el1 },
- { SYS_DESC(SYS_ID_ISAR1_EL1), NULL, get_id_isar1_el1 },
- { SYS_DESC(SYS_ID_ISAR2_EL1), NULL, get_id_isar2_el1 },
- { SYS_DESC(SYS_ID_ISAR3_EL1), NULL, get_id_isar3_el1 },
- { SYS_DESC(SYS_ID_ISAR4_EL1), NULL, get_id_isar4_el1 },
- { SYS_DESC(SYS_ID_ISAR5_EL1), NULL, get_id_isar5_el1 },
{ SYS_DESC(SYS_CLIDR_EL1), NULL, get_clidr_el1 },
{ SYS_DESC(SYS_AIDR_EL1), NULL, get_aidr_el1 },
{ SYS_DESC(SYS_CTR_EL0), NULL, get_ctr_el0 },
@@ -2079,12 +2260,31 @@ static bool copy_reg_to_user(const struct sys_reg_desc *reg, u64 __user **uind)
return true;
}
+static int walk_one_sys_reg(const struct sys_reg_desc *rd,
+ u64 __user **uind,
+ unsigned int *total)
+{
+ /*
+ * Ignore registers we trap but don't save,
+ * and for which no custom user accessor is provided.
+ */
+ if (!(rd->reg || rd->get_user))
+ return 0;
+
+ if (!copy_reg_to_user(rd, uind))
+ return -EFAULT;
+
+ (*total)++;
+ return 0;
+}
+
/* Assumed ordered tables, see kvm_sys_reg_table_init. */
static int walk_sys_regs(struct kvm_vcpu *vcpu, u64 __user *uind)
{
const struct sys_reg_desc *i1, *i2, *end1, *end2;
unsigned int total = 0;
size_t num;
+ int err;
/* We check for duplicates here, to allow arch-specific overrides. */
i1 = get_target_table(vcpu->arch.target, true, &num);
@@ -2098,21 +2298,13 @@ static int walk_sys_regs(struct kvm_vcpu *vcpu, u64 __user *uind)
while (i1 || i2) {
int cmp = cmp_sys_reg(i1, i2);
/* target-specific overrides generic entry. */
- if (cmp <= 0) {
- /* Ignore registers we trap but don't save. */
- if (i1->reg) {
- if (!copy_reg_to_user(i1, &uind))
- return -EFAULT;
- total++;
- }
- } else {
- /* Ignore registers we trap but don't save. */
- if (i2->reg) {
- if (!copy_reg_to_user(i2, &uind))
- return -EFAULT;
- total++;
- }
- }
+ if (cmp <= 0)
+ err = walk_one_sys_reg(i1, &uind, &total);
+ else
+ err = walk_one_sys_reg(i2, &uind, &total);
+
+ if (err)
+ return err;
if (cmp <= 0 && ++i1 == end1)
i1 = NULL;
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 04/30] arm64: KVM: Hide unsupported AArch64 CPU features from guests
@ 2017-10-31 15:50 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:50 UTC (permalink / raw)
To: linux-arm-kernel
Currently, a guest kernel sees the true CPU feature registers
(ID_*_EL1) when it reads them using MRS instructions. This means
that the guest may observe features that are present in the
hardware but the host doesn't understand or doesn't provide support
for. A guest may legimitately try to use such a feature as per the
architecture, but use of the feature may trap instead of working
normally, triggering undef injection into the guest.
This is not a problem for the host, but the guest may go wrong when
running on newer hardware than the host knows about.
This patch hides from guest VMs any AArch64-specific CPU features
that the host doesn't support, by exposing to the guest the
sanitised versions of the registers computed by the cpufeatures
framework, instead of the true hardware registers. To achieve
this, HCR_EL2.TID3 is now set for AArch64 guests, and emulation
code is added to KVM to report the sanitised versions of the
affected registers in response to MRS and register reads from
userspace.
The affected registers are removed from invariant_sys_regs[] (since
the invariant_sys_regs handling is no longer quite correct for
them) and added to sys_reg_desgs[], with appropriate access(),
get_user() and set_user() methods. No runtime vcpu storage is
allocated for the registers: instead, they are read on demand from
the cpufeatures framework. This may need modification in the
future if there is a need for userspace to customise the features
visible to the guest.
Attempts by userspace to write the registers are handled similarly
to the current invariant_sys_regs handling: writes are permitted,
but only if they don't attempt to change the value. This is
sufficient to support VM snapshot/restore from userspace.
Because of the additional registers, restoring a VM on an older
kernel may not work unless userspace knows how to handle the extra
VM registers exposed to the KVM user ABI by this patch.
Under the principle of least damage, this patch makes no attempt to
handle any of the other registers currently in
invariant_sys_regs[], or to emulate registers for AArch32: however,
these could be handled in a similar way in future, as necessary.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
---
arch/arm64/include/asm/sysreg.h | 3 +
arch/arm64/kvm/hyp/switch.c | 6 +
arch/arm64/kvm/sys_regs.c | 282 +++++++++++++++++++++++++++++++++-------
3 files changed, 246 insertions(+), 45 deletions(-)
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 4dceb12..609d59af 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -149,6 +149,9 @@
#define SYS_ID_AA64DFR0_EL1 sys_reg(3, 0, 0, 5, 0)
#define SYS_ID_AA64DFR1_EL1 sys_reg(3, 0, 0, 5, 1)
+#define SYS_ID_AA64AFR0_EL1 sys_reg(3, 0, 0, 5, 4)
+#define SYS_ID_AA64AFR1_EL1 sys_reg(3, 0, 0, 5, 5)
+
#define SYS_ID_AA64ISAR0_EL1 sys_reg(3, 0, 0, 6, 0)
#define SYS_ID_AA64ISAR1_EL1 sys_reg(3, 0, 0, 6, 1)
diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
index 945e79c..35a90b8 100644
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -81,11 +81,17 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu)
* it will cause an exception.
*/
val = vcpu->arch.hcr_el2;
+
if (!(val & HCR_RW) && system_supports_fpsimd()) {
write_sysreg(1 << 30, fpexc32_el2);
isb();
}
+
+ if (val & HCR_RW) /* for AArch64 only: */
+ val |= HCR_TID3; /* TID3: trap feature register accesses */
+
write_sysreg(val, hcr_el2);
+
/* Trap on AArch32 cp15 c15 accesses (EL1 or EL0) */
write_sysreg(1 << 15, hstr_el2);
/*
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 2e070d3..b1f7552 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -892,6 +892,137 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
return true;
}
+/* Read a sanitised cpufeature ID register by sys_reg_desc */
+static u64 read_id_reg(struct sys_reg_desc const *r, bool raz)
+{
+ u32 id = sys_reg((u32)r->Op0, (u32)r->Op1,
+ (u32)r->CRn, (u32)r->CRm, (u32)r->Op2);
+
+ return raz ? 0 : read_sanitised_ftr_reg(id);
+}
+
+/* cpufeature ID register access trap handlers */
+
+static bool __access_id_reg(struct kvm_vcpu *vcpu,
+ struct sys_reg_params *p,
+ const struct sys_reg_desc *r,
+ bool raz)
+{
+ if (p->is_write)
+ return write_to_read_only(vcpu, p, r);
+
+ p->regval = read_id_reg(r, raz);
+ return true;
+}
+
+static bool access_id_reg(struct kvm_vcpu *vcpu,
+ struct sys_reg_params *p,
+ const struct sys_reg_desc *r)
+{
+ return __access_id_reg(vcpu, p, r, false);
+}
+
+static bool access_raz_id_reg(struct kvm_vcpu *vcpu,
+ struct sys_reg_params *p,
+ const struct sys_reg_desc *r)
+{
+ return __access_id_reg(vcpu, p, r, true);
+}
+
+static int reg_from_user(u64 *val, const void __user *uaddr, u64 id);
+static int reg_to_user(void __user *uaddr, const u64 *val, u64 id);
+static u64 sys_reg_to_index(const struct sys_reg_desc *reg);
+
+/*
+ * cpufeature ID register user accessors
+ *
+ * For now, these registers are immutable for userspace, so no values
+ * are stored, and for set_id_reg() we don't allow the effective value
+ * to be changed.
+ */
+static int __get_id_reg(const struct sys_reg_desc *rd, void __user *uaddr,
+ bool raz)
+{
+ const u64 id = sys_reg_to_index(rd);
+ const u64 val = read_id_reg(rd, raz);
+
+ return reg_to_user(uaddr, &val, id);
+}
+
+static int __set_id_reg(const struct sys_reg_desc *rd, void __user *uaddr,
+ bool raz)
+{
+ const u64 id = sys_reg_to_index(rd);
+ int err;
+ u64 val;
+
+ err = reg_from_user(&val, uaddr, id);
+ if (err)
+ return err;
+
+ /* This is what we mean by invariant: you can't change it. */
+ if (val != read_id_reg(rd, raz))
+ return -EINVAL;
+
+ return 0;
+}
+
+static int get_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+ const struct kvm_one_reg *reg, void __user *uaddr)
+{
+ return __get_id_reg(rd, uaddr, false);
+}
+
+static int set_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+ const struct kvm_one_reg *reg, void __user *uaddr)
+{
+ return __set_id_reg(rd, uaddr, false);
+}
+
+static int get_raz_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+ const struct kvm_one_reg *reg, void __user *uaddr)
+{
+ return __get_id_reg(rd, uaddr, true);
+}
+
+static int set_raz_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+ const struct kvm_one_reg *reg, void __user *uaddr)
+{
+ return __set_id_reg(rd, uaddr, true);
+}
+
+/* sys_reg_desc initialiser for known cpufeature ID registers */
+#define ID_SANITISED(name) { \
+ SYS_DESC(SYS_##name), \
+ .access = access_id_reg, \
+ .get_user = get_id_reg, \
+ .set_user = set_id_reg, \
+}
+
+/*
+ * sys_reg_desc initialiser for architecturally unallocated cpufeature ID
+ * register with encoding Op0=3, Op1=0, CRn=0, CRm=crm, Op2=op2
+ * (1 <= crm < 8, 0 <= Op2 < 8).
+ */
+#define ID_UNALLOCATED(crm, op2) { \
+ Op0(3), Op1(0), CRn(0), CRm(crm), Op2(op2), \
+ .access = access_raz_id_reg, \
+ .get_user = get_raz_id_reg, \
+ .set_user = set_raz_id_reg, \
+}
+
+/*
+ * sys_reg_desc initialiser for known ID registers that we hide from guests.
+ * For now, these are exposed just like unallocated ID regs: they appear
+ * RAZ for the guest.
+ */
+#define ID_HIDDEN(name) { \
+ SYS_DESC(SYS_##name), \
+ .access = access_raz_id_reg, \
+ .get_user = get_raz_id_reg, \
+ .set_user = set_raz_id_reg, \
+}
+
/*
* Architected system registers.
* Important: Must be sorted ascending by Op0, Op1, CRn, CRm, Op2
@@ -944,6 +1075,84 @@ static const struct sys_reg_desc sys_reg_descs[] = {
{ SYS_DESC(SYS_DBGVCR32_EL2), NULL, reset_val, DBGVCR32_EL2, 0 },
{ SYS_DESC(SYS_MPIDR_EL1), NULL, reset_mpidr, MPIDR_EL1 },
+
+ /*
+ * ID regs: all ID_SANITISED() entries here must have corresponding
+ * entries in arm64_ftr_regs[].
+ */
+
+ /* AArch64 mappings of the AArch32 ID registers */
+ /* CRm=1 */
+ ID_SANITISED(ID_PFR0_EL1),
+ ID_SANITISED(ID_PFR1_EL1),
+ ID_SANITISED(ID_DFR0_EL1),
+ ID_HIDDEN(ID_AFR0_EL1),
+ ID_SANITISED(ID_MMFR0_EL1),
+ ID_SANITISED(ID_MMFR1_EL1),
+ ID_SANITISED(ID_MMFR2_EL1),
+ ID_SANITISED(ID_MMFR3_EL1),
+
+ /* CRm=2 */
+ ID_SANITISED(ID_ISAR0_EL1),
+ ID_SANITISED(ID_ISAR1_EL1),
+ ID_SANITISED(ID_ISAR2_EL1),
+ ID_SANITISED(ID_ISAR3_EL1),
+ ID_SANITISED(ID_ISAR4_EL1),
+ ID_SANITISED(ID_ISAR5_EL1),
+ ID_SANITISED(ID_MMFR4_EL1),
+ ID_UNALLOCATED(2,7),
+
+ /* CRm=3 */
+ ID_SANITISED(MVFR0_EL1),
+ ID_SANITISED(MVFR1_EL1),
+ ID_SANITISED(MVFR2_EL1),
+ ID_UNALLOCATED(3,3),
+ ID_UNALLOCATED(3,4),
+ ID_UNALLOCATED(3,5),
+ ID_UNALLOCATED(3,6),
+ ID_UNALLOCATED(3,7),
+
+ /* AArch64 ID registers */
+ /* CRm=4 */
+ ID_SANITISED(ID_AA64PFR0_EL1),
+ ID_SANITISED(ID_AA64PFR1_EL1),
+ ID_UNALLOCATED(4,2),
+ ID_UNALLOCATED(4,3),
+ ID_UNALLOCATED(4,4),
+ ID_UNALLOCATED(4,5),
+ ID_UNALLOCATED(4,6),
+ ID_UNALLOCATED(4,7),
+
+ /* CRm=5 */
+ ID_SANITISED(ID_AA64DFR0_EL1),
+ ID_SANITISED(ID_AA64DFR1_EL1),
+ ID_UNALLOCATED(5,2),
+ ID_UNALLOCATED(5,3),
+ ID_HIDDEN(ID_AA64AFR0_EL1),
+ ID_HIDDEN(ID_AA64AFR1_EL1),
+ ID_UNALLOCATED(5,6),
+ ID_UNALLOCATED(5,7),
+
+ /* CRm=6 */
+ ID_SANITISED(ID_AA64ISAR0_EL1),
+ ID_SANITISED(ID_AA64ISAR1_EL1),
+ ID_UNALLOCATED(6,2),
+ ID_UNALLOCATED(6,3),
+ ID_UNALLOCATED(6,4),
+ ID_UNALLOCATED(6,5),
+ ID_UNALLOCATED(6,6),
+ ID_UNALLOCATED(6,7),
+
+ /* CRm=7 */
+ ID_SANITISED(ID_AA64MMFR0_EL1),
+ ID_SANITISED(ID_AA64MMFR1_EL1),
+ ID_SANITISED(ID_AA64MMFR2_EL1),
+ ID_UNALLOCATED(7,3),
+ ID_UNALLOCATED(7,4),
+ ID_UNALLOCATED(7,5),
+ ID_UNALLOCATED(7,6),
+ ID_UNALLOCATED(7,7),
+
{ SYS_DESC(SYS_SCTLR_EL1), access_vm_reg, reset_val, SCTLR_EL1, 0x00C50078 },
{ SYS_DESC(SYS_CPACR_EL1), NULL, reset_val, CPACR_EL1, 0 },
{ SYS_DESC(SYS_TTBR0_EL1), access_vm_reg, reset_unknown, TTBR0_EL1 },
@@ -1790,8 +1999,8 @@ static const struct sys_reg_desc *index_to_sys_reg_desc(struct kvm_vcpu *vcpu,
if (!r)
r = find_reg(¶ms, sys_reg_descs, ARRAY_SIZE(sys_reg_descs));
- /* Not saved in the sys_reg array? */
- if (r && !r->reg)
+ /* Not saved in the sys_reg array and not otherwise accessible? */
+ if (r && !(r->reg || r->get_user))
r = NULL;
return r;
@@ -1815,20 +2024,6 @@ static const struct sys_reg_desc *index_to_sys_reg_desc(struct kvm_vcpu *vcpu,
FUNCTION_INVARIANT(midr_el1)
FUNCTION_INVARIANT(ctr_el0)
FUNCTION_INVARIANT(revidr_el1)
-FUNCTION_INVARIANT(id_pfr0_el1)
-FUNCTION_INVARIANT(id_pfr1_el1)
-FUNCTION_INVARIANT(id_dfr0_el1)
-FUNCTION_INVARIANT(id_afr0_el1)
-FUNCTION_INVARIANT(id_mmfr0_el1)
-FUNCTION_INVARIANT(id_mmfr1_el1)
-FUNCTION_INVARIANT(id_mmfr2_el1)
-FUNCTION_INVARIANT(id_mmfr3_el1)
-FUNCTION_INVARIANT(id_isar0_el1)
-FUNCTION_INVARIANT(id_isar1_el1)
-FUNCTION_INVARIANT(id_isar2_el1)
-FUNCTION_INVARIANT(id_isar3_el1)
-FUNCTION_INVARIANT(id_isar4_el1)
-FUNCTION_INVARIANT(id_isar5_el1)
FUNCTION_INVARIANT(clidr_el1)
FUNCTION_INVARIANT(aidr_el1)
@@ -1836,20 +2031,6 @@ FUNCTION_INVARIANT(aidr_el1)
static struct sys_reg_desc invariant_sys_regs[] = {
{ SYS_DESC(SYS_MIDR_EL1), NULL, get_midr_el1 },
{ SYS_DESC(SYS_REVIDR_EL1), NULL, get_revidr_el1 },
- { SYS_DESC(SYS_ID_PFR0_EL1), NULL, get_id_pfr0_el1 },
- { SYS_DESC(SYS_ID_PFR1_EL1), NULL, get_id_pfr1_el1 },
- { SYS_DESC(SYS_ID_DFR0_EL1), NULL, get_id_dfr0_el1 },
- { SYS_DESC(SYS_ID_AFR0_EL1), NULL, get_id_afr0_el1 },
- { SYS_DESC(SYS_ID_MMFR0_EL1), NULL, get_id_mmfr0_el1 },
- { SYS_DESC(SYS_ID_MMFR1_EL1), NULL, get_id_mmfr1_el1 },
- { SYS_DESC(SYS_ID_MMFR2_EL1), NULL, get_id_mmfr2_el1 },
- { SYS_DESC(SYS_ID_MMFR3_EL1), NULL, get_id_mmfr3_el1 },
- { SYS_DESC(SYS_ID_ISAR0_EL1), NULL, get_id_isar0_el1 },
- { SYS_DESC(SYS_ID_ISAR1_EL1), NULL, get_id_isar1_el1 },
- { SYS_DESC(SYS_ID_ISAR2_EL1), NULL, get_id_isar2_el1 },
- { SYS_DESC(SYS_ID_ISAR3_EL1), NULL, get_id_isar3_el1 },
- { SYS_DESC(SYS_ID_ISAR4_EL1), NULL, get_id_isar4_el1 },
- { SYS_DESC(SYS_ID_ISAR5_EL1), NULL, get_id_isar5_el1 },
{ SYS_DESC(SYS_CLIDR_EL1), NULL, get_clidr_el1 },
{ SYS_DESC(SYS_AIDR_EL1), NULL, get_aidr_el1 },
{ SYS_DESC(SYS_CTR_EL0), NULL, get_ctr_el0 },
@@ -2079,12 +2260,31 @@ static bool copy_reg_to_user(const struct sys_reg_desc *reg, u64 __user **uind)
return true;
}
+static int walk_one_sys_reg(const struct sys_reg_desc *rd,
+ u64 __user **uind,
+ unsigned int *total)
+{
+ /*
+ * Ignore registers we trap but don't save,
+ * and for which no custom user accessor is provided.
+ */
+ if (!(rd->reg || rd->get_user))
+ return 0;
+
+ if (!copy_reg_to_user(rd, uind))
+ return -EFAULT;
+
+ (*total)++;
+ return 0;
+}
+
/* Assumed ordered tables, see kvm_sys_reg_table_init. */
static int walk_sys_regs(struct kvm_vcpu *vcpu, u64 __user *uind)
{
const struct sys_reg_desc *i1, *i2, *end1, *end2;
unsigned int total = 0;
size_t num;
+ int err;
/* We check for duplicates here, to allow arch-specific overrides. */
i1 = get_target_table(vcpu->arch.target, true, &num);
@@ -2098,21 +2298,13 @@ static int walk_sys_regs(struct kvm_vcpu *vcpu, u64 __user *uind)
while (i1 || i2) {
int cmp = cmp_sys_reg(i1, i2);
/* target-specific overrides generic entry. */
- if (cmp <= 0) {
- /* Ignore registers we trap but don't save. */
- if (i1->reg) {
- if (!copy_reg_to_user(i1, &uind))
- return -EFAULT;
- total++;
- }
- } else {
- /* Ignore registers we trap but don't save. */
- if (i2->reg) {
- if (!copy_reg_to_user(i2, &uind))
- return -EFAULT;
- total++;
- }
- }
+ if (cmp <= 0)
+ err = walk_one_sys_reg(i1, &uind, &total);
+ else
+ err = walk_one_sys_reg(i2, &uind, &total);
+
+ if (err)
+ return err;
if (cmp <= 0 && ++i1 == end1)
i1 = NULL;
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 05/30] arm64: efi: Add missing Kconfig dependency on KERNEL_MODE_NEON
@ 2017-10-31 15:50 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:50 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-arch, Okamoto Takayuki, libc-alpha, Ard Biesheuvel,
Szabolcs Nagy, Catalin Marinas, Will Deacon, kvmarm
The EFI runtime services ABI permits calls to EFI to clobber
certain FPSIMD/NEON registers, as per the AArch64 procedure call
standard.
Saving/restoring the clobbered registers around such calls needs
KERNEL_MODE_NEON, but the dependency is missing from Kconfig.
This patch adds the missing dependency.
This will aid bisection of the patches implementing support for the
ARM Scalable Vector Extension (SVE).
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
arch/arm64/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 05aa592..5cfb79d 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1064,6 +1064,7 @@ config EFI_STUB
config EFI
bool "UEFI runtime support"
depends on OF && !CPU_BIG_ENDIAN
+ depends on KERNEL_MODE_NEON
select LIBFDT
select UCS2_STRING
select EFI_PARAMS_FROM_FDT
--
2.1.4
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 05/30] arm64: efi: Add missing Kconfig dependency on KERNEL_MODE_NEON
@ 2017-10-31 15:50 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:50 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
The EFI runtime services ABI permits calls to EFI to clobber
certain FPSIMD/NEON registers, as per the AArch64 procedure call
standard.
Saving/restoring the clobbered registers around such calls needs
KERNEL_MODE_NEON, but the dependency is missing from Kconfig.
This patch adds the missing dependency.
This will aid bisection of the patches implementing support for the
ARM Scalable Vector Extension (SVE).
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
arch/arm64/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 05aa592..5cfb79d 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1064,6 +1064,7 @@ config EFI_STUB
config EFI
bool "UEFI runtime support"
depends on OF && !CPU_BIG_ENDIAN
+ depends on KERNEL_MODE_NEON
select LIBFDT
select UCS2_STRING
select EFI_PARAMS_FROM_FDT
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 05/30] arm64: efi: Add missing Kconfig dependency on KERNEL_MODE_NEON
@ 2017-10-31 15:50 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:50 UTC (permalink / raw)
To: linux-arm-kernel
The EFI runtime services ABI permits calls to EFI to clobber
certain FPSIMD/NEON registers, as per the AArch64 procedure call
standard.
Saving/restoring the clobbered registers around such calls needs
KERNEL_MODE_NEON, but the dependency is missing from Kconfig.
This patch adds the missing dependency.
This will aid bisection of the patches implementing support for the
ARM Scalable Vector Extension (SVE).
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
arch/arm64/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 05aa592..5cfb79d 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1064,6 +1064,7 @@ config EFI_STUB
config EFI
bool "UEFI runtime support"
depends on OF && !CPU_BIG_ENDIAN
+ depends on KERNEL_MODE_NEON
select LIBFDT
select UCS2_STRING
select EFI_PARAMS_FROM_FDT
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 06/30] arm64: Port deprecated instruction emulation to new sysctl interface
2017-10-31 15:50 ` Dave Martin
@ 2017-10-31 15:50 ` Dave Martin
-1 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:50 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
Currently, armv8_deprected.c takes charge of the "abi" sysctl
directory, which makes life difficult for other code that wants to
register sysctls in the same directory.
There is a "new" [1] sysctl registration interface that removes the
need to define ctl_tables for parent directories explicitly, which
is ideal here.
This patch ports register_insn_emulation_sysctl() over to the
register_sysctl() interface and removes the redundant ctl_table for
"abi".
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
[1] fea478d4101a (sysctl: Add register_sysctl for normal sysctl
users)
The commit message notes an intent to port users of the
pre-existing interfaces over to register_sysctl(), though the
number of users of the new interface currently appears negligible.
---
arch/arm64/kernel/armv8_deprecated.c | 15 +++------------
1 file changed, 3 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/kernel/armv8_deprecated.c b/arch/arm64/kernel/armv8_deprecated.c
index a4dc115..c33b5e4 100644
--- a/arch/arm64/kernel/armv8_deprecated.c
+++ b/arch/arm64/kernel/armv8_deprecated.c
@@ -228,15 +228,7 @@ static int emulation_proc_handler(struct ctl_table *table, int write,
return ret;
}
-static struct ctl_table ctl_abi[] = {
- {
- .procname = "abi",
- .mode = 0555,
- },
- { }
-};
-
-static void __init register_insn_emulation_sysctl(struct ctl_table *table)
+static void __init register_insn_emulation_sysctl(void)
{
unsigned long flags;
int i = 0;
@@ -262,8 +254,7 @@ static void __init register_insn_emulation_sysctl(struct ctl_table *table)
}
raw_spin_unlock_irqrestore(&insn_emulation_lock, flags);
- table->child = insns_sysctl;
- register_sysctl_table(table);
+ register_sysctl("abi", insns_sysctl);
}
/*
@@ -644,7 +635,7 @@ static int __init armv8_deprecated_init(void)
cpuhp_setup_state_nocalls(CPUHP_AP_ARM64_ISNDEP_STARTING,
"arm64/isndep:starting",
run_all_insn_set_hw_mode, NULL);
- register_insn_emulation_sysctl(ctl_abi);
+ register_insn_emulation_sysctl();
return 0;
}
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 06/30] arm64: Port deprecated instruction emulation to new sysctl interface
@ 2017-10-31 15:50 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:50 UTC (permalink / raw)
To: linux-arm-kernel
Currently, armv8_deprected.c takes charge of the "abi" sysctl
directory, which makes life difficult for other code that wants to
register sysctls in the same directory.
There is a "new" [1] sysctl registration interface that removes the
need to define ctl_tables for parent directories explicitly, which
is ideal here.
This patch ports register_insn_emulation_sysctl() over to the
register_sysctl() interface and removes the redundant ctl_table for
"abi".
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
[1] fea478d4101a (sysctl: Add register_sysctl for normal sysctl
users)
The commit message notes an intent to port users of the
pre-existing interfaces over to register_sysctl(), though the
number of users of the new interface currently appears negligible.
---
arch/arm64/kernel/armv8_deprecated.c | 15 +++------------
1 file changed, 3 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/kernel/armv8_deprecated.c b/arch/arm64/kernel/armv8_deprecated.c
index a4dc115..c33b5e4 100644
--- a/arch/arm64/kernel/armv8_deprecated.c
+++ b/arch/arm64/kernel/armv8_deprecated.c
@@ -228,15 +228,7 @@ static int emulation_proc_handler(struct ctl_table *table, int write,
return ret;
}
-static struct ctl_table ctl_abi[] = {
- {
- .procname = "abi",
- .mode = 0555,
- },
- { }
-};
-
-static void __init register_insn_emulation_sysctl(struct ctl_table *table)
+static void __init register_insn_emulation_sysctl(void)
{
unsigned long flags;
int i = 0;
@@ -262,8 +254,7 @@ static void __init register_insn_emulation_sysctl(struct ctl_table *table)
}
raw_spin_unlock_irqrestore(&insn_emulation_lock, flags);
- table->child = insns_sysctl;
- register_sysctl_table(table);
+ register_sysctl("abi", insns_sysctl);
}
/*
@@ -644,7 +635,7 @@ static int __init armv8_deprecated_init(void)
cpuhp_setup_state_nocalls(CPUHP_AP_ARM64_ISNDEP_STARTING,
"arm64/isndep:starting",
run_all_insn_set_hw_mode, NULL);
- register_insn_emulation_sysctl(ctl_abi);
+ register_insn_emulation_sysctl();
return 0;
}
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 07/30] arm64: fpsimd: Simplify uses of {set,clear}_ti_thread_flag()
2017-10-31 15:50 ` Dave Martin
@ 2017-10-31 15:50 ` Dave Martin
-1 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:50 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
The existing FPSIMD context switch code contains a couple of
instances of {set,clear}_ti_thread(task_thread_info(task)). Since
there are thread flag manipulators that operate directly on
task_struct, this verbosity isn't strictly needed.
For consistency, this patch simplifies the affected calls. This
should have no impact on behaviour.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
arch/arm64/kernel/fpsimd.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index e851faa19..2baba0d 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -160,11 +160,9 @@ void fpsimd_thread_switch(struct task_struct *next)
if (__this_cpu_read(fpsimd_last_state) == st
&& st->cpu == smp_processor_id())
- clear_ti_thread_flag(task_thread_info(next),
- TIF_FOREIGN_FPSTATE);
+ clear_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE);
else
- set_ti_thread_flag(task_thread_info(next),
- TIF_FOREIGN_FPSTATE);
+ set_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE);
}
}
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 07/30] arm64: fpsimd: Simplify uses of {set, clear}_ti_thread_flag()
@ 2017-10-31 15:50 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:50 UTC (permalink / raw)
To: linux-arm-kernel
The existing FPSIMD context switch code contains a couple of
instances of {set,clear}_ti_thread(task_thread_info(task)). Since
there are thread flag manipulators that operate directly on
task_struct, this verbosity isn't strictly needed.
For consistency, this patch simplifies the affected calls. This
should have no impact on behaviour.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
arch/arm64/kernel/fpsimd.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index e851faa19..2baba0d 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -160,11 +160,9 @@ void fpsimd_thread_switch(struct task_struct *next)
if (__this_cpu_read(fpsimd_last_state) == st
&& st->cpu == smp_processor_id())
- clear_ti_thread_flag(task_thread_info(next),
- TIF_FOREIGN_FPSTATE);
+ clear_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE);
else
- set_ti_thread_flag(task_thread_info(next),
- TIF_FOREIGN_FPSTATE);
+ set_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE);
}
}
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 08/30] arm64/sve: System register and exception syndrome definitions
2017-10-31 15:50 ` Dave Martin
@ 2017-10-31 15:51 ` Dave Martin
-1 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
The SVE architecture adds some system registers, ID register fields
and a dedicated ESR exception class.
This patch adds the appropriate definitions that will be needed by
the kernel.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
arch/arm64/include/asm/esr.h | 3 ++-
arch/arm64/include/asm/kvm_arm.h | 1 +
arch/arm64/include/asm/sysreg.h | 21 +++++++++++++++++++++
arch/arm64/kernel/traps.c | 1 +
4 files changed, 25 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/include/asm/esr.h b/arch/arm64/include/asm/esr.h
index 66ed8b6..014d7d8 100644
--- a/arch/arm64/include/asm/esr.h
+++ b/arch/arm64/include/asm/esr.h
@@ -43,7 +43,8 @@
#define ESR_ELx_EC_HVC64 (0x16)
#define ESR_ELx_EC_SMC64 (0x17)
#define ESR_ELx_EC_SYS64 (0x18)
-/* Unallocated EC: 0x19 - 0x1E */
+#define ESR_ELx_EC_SVE (0x19)
+/* Unallocated EC: 0x1A - 0x1E */
#define ESR_ELx_EC_IMP_DEF (0x1f)
#define ESR_ELx_EC_IABT_LOW (0x20)
#define ESR_ELx_EC_IABT_CUR (0x21)
diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
index 61d694c..dbf0537 100644
--- a/arch/arm64/include/asm/kvm_arm.h
+++ b/arch/arm64/include/asm/kvm_arm.h
@@ -185,6 +185,7 @@
#define CPTR_EL2_TCPAC (1 << 31)
#define CPTR_EL2_TTA (1 << 20)
#define CPTR_EL2_TFP (1 << CPTR_EL2_TFP_SHIFT)
+#define CPTR_EL2_TZ (1 << 8)
#define CPTR_EL2_DEFAULT 0x000033ff
/* Hyp Debug Configuration Register bits */
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 609d59af..08cc885 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -145,6 +145,7 @@
#define SYS_ID_AA64PFR0_EL1 sys_reg(3, 0, 0, 4, 0)
#define SYS_ID_AA64PFR1_EL1 sys_reg(3, 0, 0, 4, 1)
+#define SYS_ID_AA64ZFR0_EL1 sys_reg(3, 0, 0, 4, 4)
#define SYS_ID_AA64DFR0_EL1 sys_reg(3, 0, 0, 5, 0)
#define SYS_ID_AA64DFR1_EL1 sys_reg(3, 0, 0, 5, 1)
@@ -163,6 +164,8 @@
#define SYS_ACTLR_EL1 sys_reg(3, 0, 1, 0, 1)
#define SYS_CPACR_EL1 sys_reg(3, 0, 1, 0, 2)
+#define SYS_ZCR_EL1 sys_reg(3, 0, 1, 2, 0)
+
#define SYS_TTBR0_EL1 sys_reg(3, 0, 2, 0, 0)
#define SYS_TTBR1_EL1 sys_reg(3, 0, 2, 0, 1)
#define SYS_TCR_EL1 sys_reg(3, 0, 2, 0, 2)
@@ -346,6 +349,8 @@
#define SYS_PMCCFILTR_EL0 sys_reg (3, 3, 14, 15, 7)
+#define SYS_ZCR_EL2 sys_reg(3, 4, 1, 2, 0)
+
#define SYS_DACR32_EL2 sys_reg(3, 4, 3, 0, 0)
#define SYS_IFSR32_EL2 sys_reg(3, 4, 5, 0, 1)
#define SYS_FPEXC32_EL2 sys_reg(3, 4, 5, 3, 0)
@@ -432,6 +437,7 @@
#define ID_AA64ISAR1_DPB_SHIFT 0
/* id_aa64pfr0 */
+#define ID_AA64PFR0_SVE_SHIFT 32
#define ID_AA64PFR0_GIC_SHIFT 24
#define ID_AA64PFR0_ASIMD_SHIFT 20
#define ID_AA64PFR0_FP_SHIFT 16
@@ -440,6 +446,7 @@
#define ID_AA64PFR0_EL1_SHIFT 4
#define ID_AA64PFR0_EL0_SHIFT 0
+#define ID_AA64PFR0_SVE 0x1
#define ID_AA64PFR0_FP_NI 0xf
#define ID_AA64PFR0_FP_SUPPORTED 0x0
#define ID_AA64PFR0_ASIMD_NI 0xf
@@ -541,6 +548,20 @@
#endif
+/*
+ * The ZCR_ELx_LEN_* definitions intentionally include bits [8:4] which
+ * are reserved by the SVE architecture for future expansion of the LEN
+ * field, with compatible semantics.
+ */
+#define ZCR_ELx_LEN_SHIFT 0
+#define ZCR_ELx_LEN_SIZE 9
+#define ZCR_ELx_LEN_MASK 0x1ff
+
+#define CPACR_EL1_ZEN_EL1EN (1 << 16) /* enable EL1 access */
+#define CPACR_EL1_ZEN_EL0EN (1 << 17) /* enable EL0 access, if EL1EN set */
+#define CPACR_EL1_ZEN (CPACR_EL1_ZEN_EL1EN | CPACR_EL1_ZEN_EL0EN)
+
+
/* Safe value for MPIDR_EL1: Bit31:RES1, Bit30:U:0, Bit24:MT:0 */
#define SYS_MPIDR_SAFE_VAL (1UL << 31)
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index afb6b19..18c0290 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -555,6 +555,7 @@ static const char *esr_class_str[] = {
[ESR_ELx_EC_HVC64] = "HVC (AArch64)",
[ESR_ELx_EC_SMC64] = "SMC (AArch64)",
[ESR_ELx_EC_SYS64] = "MSR/MRS (AArch64)",
+ [ESR_ELx_EC_SVE] = "SVE",
[ESR_ELx_EC_IMP_DEF] = "EL3 IMP DEF",
[ESR_ELx_EC_IABT_LOW] = "IABT (lower EL)",
[ESR_ELx_EC_IABT_CUR] = "IABT (current EL)",
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 08/30] arm64/sve: System register and exception syndrome definitions
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
The SVE architecture adds some system registers, ID register fields
and a dedicated ESR exception class.
This patch adds the appropriate definitions that will be needed by
the kernel.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
arch/arm64/include/asm/esr.h | 3 ++-
arch/arm64/include/asm/kvm_arm.h | 1 +
arch/arm64/include/asm/sysreg.h | 21 +++++++++++++++++++++
arch/arm64/kernel/traps.c | 1 +
4 files changed, 25 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/include/asm/esr.h b/arch/arm64/include/asm/esr.h
index 66ed8b6..014d7d8 100644
--- a/arch/arm64/include/asm/esr.h
+++ b/arch/arm64/include/asm/esr.h
@@ -43,7 +43,8 @@
#define ESR_ELx_EC_HVC64 (0x16)
#define ESR_ELx_EC_SMC64 (0x17)
#define ESR_ELx_EC_SYS64 (0x18)
-/* Unallocated EC: 0x19 - 0x1E */
+#define ESR_ELx_EC_SVE (0x19)
+/* Unallocated EC: 0x1A - 0x1E */
#define ESR_ELx_EC_IMP_DEF (0x1f)
#define ESR_ELx_EC_IABT_LOW (0x20)
#define ESR_ELx_EC_IABT_CUR (0x21)
diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
index 61d694c..dbf0537 100644
--- a/arch/arm64/include/asm/kvm_arm.h
+++ b/arch/arm64/include/asm/kvm_arm.h
@@ -185,6 +185,7 @@
#define CPTR_EL2_TCPAC (1 << 31)
#define CPTR_EL2_TTA (1 << 20)
#define CPTR_EL2_TFP (1 << CPTR_EL2_TFP_SHIFT)
+#define CPTR_EL2_TZ (1 << 8)
#define CPTR_EL2_DEFAULT 0x000033ff
/* Hyp Debug Configuration Register bits */
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 609d59af..08cc885 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -145,6 +145,7 @@
#define SYS_ID_AA64PFR0_EL1 sys_reg(3, 0, 0, 4, 0)
#define SYS_ID_AA64PFR1_EL1 sys_reg(3, 0, 0, 4, 1)
+#define SYS_ID_AA64ZFR0_EL1 sys_reg(3, 0, 0, 4, 4)
#define SYS_ID_AA64DFR0_EL1 sys_reg(3, 0, 0, 5, 0)
#define SYS_ID_AA64DFR1_EL1 sys_reg(3, 0, 0, 5, 1)
@@ -163,6 +164,8 @@
#define SYS_ACTLR_EL1 sys_reg(3, 0, 1, 0, 1)
#define SYS_CPACR_EL1 sys_reg(3, 0, 1, 0, 2)
+#define SYS_ZCR_EL1 sys_reg(3, 0, 1, 2, 0)
+
#define SYS_TTBR0_EL1 sys_reg(3, 0, 2, 0, 0)
#define SYS_TTBR1_EL1 sys_reg(3, 0, 2, 0, 1)
#define SYS_TCR_EL1 sys_reg(3, 0, 2, 0, 2)
@@ -346,6 +349,8 @@
#define SYS_PMCCFILTR_EL0 sys_reg (3, 3, 14, 15, 7)
+#define SYS_ZCR_EL2 sys_reg(3, 4, 1, 2, 0)
+
#define SYS_DACR32_EL2 sys_reg(3, 4, 3, 0, 0)
#define SYS_IFSR32_EL2 sys_reg(3, 4, 5, 0, 1)
#define SYS_FPEXC32_EL2 sys_reg(3, 4, 5, 3, 0)
@@ -432,6 +437,7 @@
#define ID_AA64ISAR1_DPB_SHIFT 0
/* id_aa64pfr0 */
+#define ID_AA64PFR0_SVE_SHIFT 32
#define ID_AA64PFR0_GIC_SHIFT 24
#define ID_AA64PFR0_ASIMD_SHIFT 20
#define ID_AA64PFR0_FP_SHIFT 16
@@ -440,6 +446,7 @@
#define ID_AA64PFR0_EL1_SHIFT 4
#define ID_AA64PFR0_EL0_SHIFT 0
+#define ID_AA64PFR0_SVE 0x1
#define ID_AA64PFR0_FP_NI 0xf
#define ID_AA64PFR0_FP_SUPPORTED 0x0
#define ID_AA64PFR0_ASIMD_NI 0xf
@@ -541,6 +548,20 @@
#endif
+/*
+ * The ZCR_ELx_LEN_* definitions intentionally include bits [8:4] which
+ * are reserved by the SVE architecture for future expansion of the LEN
+ * field, with compatible semantics.
+ */
+#define ZCR_ELx_LEN_SHIFT 0
+#define ZCR_ELx_LEN_SIZE 9
+#define ZCR_ELx_LEN_MASK 0x1ff
+
+#define CPACR_EL1_ZEN_EL1EN (1 << 16) /* enable EL1 access */
+#define CPACR_EL1_ZEN_EL0EN (1 << 17) /* enable EL0 access, if EL1EN set */
+#define CPACR_EL1_ZEN (CPACR_EL1_ZEN_EL1EN | CPACR_EL1_ZEN_EL0EN)
+
+
/* Safe value for MPIDR_EL1: Bit31:RES1, Bit30:U:0, Bit24:MT:0 */
#define SYS_MPIDR_SAFE_VAL (1UL << 31)
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index afb6b19..18c0290 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -555,6 +555,7 @@ static const char *esr_class_str[] = {
[ESR_ELx_EC_HVC64] = "HVC (AArch64)",
[ESR_ELx_EC_SMC64] = "SMC (AArch64)",
[ESR_ELx_EC_SYS64] = "MSR/MRS (AArch64)",
+ [ESR_ELx_EC_SVE] = "SVE",
[ESR_ELx_EC_IMP_DEF] = "EL3 IMP DEF",
[ESR_ELx_EC_IABT_LOW] = "IABT (lower EL)",
[ESR_ELx_EC_IABT_CUR] = "IABT (current EL)",
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 09/30] arm64/sve: Low-level SVE architectural state manipulation functions
2017-10-31 15:50 ` Dave Martin
@ 2017-10-31 15:51 ` Dave Martin
-1 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
Manipulating the SVE architectural state, including the vector and
predicate registers, first-fault register and the vector length,
requires the use of dedicated instructions added by SVE.
This patch adds suitable assembly functions for saving and
restoring the SVE registers and querying the vector length.
Setting of the vector length is done as part of register restore.
Since people building kernels may not all get an SVE-enabled
toolchain for a while, this patch uses macros that generate
explicit opcodes in place of assembler mnemonics.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
---
arch/arm64/include/asm/fpsimd.h | 5 ++
arch/arm64/include/asm/fpsimdmacros.h | 148 ++++++++++++++++++++++++++++++++++
arch/arm64/kernel/entry-fpsimd.S | 17 ++++
3 files changed, 170 insertions(+)
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index 410c481..026a7c7 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -67,6 +67,11 @@ extern void fpsimd_update_current_state(struct fpsimd_state *state);
extern void fpsimd_flush_task_state(struct task_struct *target);
+extern void sve_save_state(void *state, u32 *pfpsr);
+extern void sve_load_state(void const *state, u32 const *pfpsr,
+ unsigned long vq_minus_1);
+extern unsigned int sve_get_vl(void);
+
/* For use by EFI runtime services calls only */
extern void __efi_fpsimd_begin(void);
extern void __efi_fpsimd_end(void);
diff --git a/arch/arm64/include/asm/fpsimdmacros.h b/arch/arm64/include/asm/fpsimdmacros.h
index 0f5fdd3..e050d76 100644
--- a/arch/arm64/include/asm/fpsimdmacros.h
+++ b/arch/arm64/include/asm/fpsimdmacros.h
@@ -75,3 +75,151 @@
ldr w\tmpnr, [\state, #16 * 2 + 4]
fpsimd_restore_fpcr x\tmpnr, \state
.endm
+
+/* Sanity-check macros to help avoid encoding garbage instructions */
+
+.macro _check_general_reg nr
+ .if (\nr) < 0 || (\nr) > 30
+ .error "Bad register number \nr."
+ .endif
+.endm
+
+.macro _sve_check_zreg znr
+ .if (\znr) < 0 || (\znr) > 31
+ .error "Bad Scalable Vector Extension vector register number \znr."
+ .endif
+.endm
+
+.macro _sve_check_preg pnr
+ .if (\pnr) < 0 || (\pnr) > 15
+ .error "Bad Scalable Vector Extension predicate register number \pnr."
+ .endif
+.endm
+
+.macro _check_num n, min, max
+ .if (\n) < (\min) || (\n) > (\max)
+ .error "Number \n out of range [\min,\max]"
+ .endif
+.endm
+
+/* SVE instruction encodings for non-SVE-capable assemblers */
+
+/* STR (vector): STR Z\nz, [X\nxbase, #\offset, MUL VL] */
+.macro _sve_str_v nz, nxbase, offset=0
+ _sve_check_zreg \nz
+ _check_general_reg \nxbase
+ _check_num (\offset), -0x100, 0xff
+ .inst 0xe5804000 \
+ | (\nz) \
+ | ((\nxbase) << 5) \
+ | (((\offset) & 7) << 10) \
+ | (((\offset) & 0x1f8) << 13)
+.endm
+
+/* LDR (vector): LDR Z\nz, [X\nxbase, #\offset, MUL VL] */
+.macro _sve_ldr_v nz, nxbase, offset=0
+ _sve_check_zreg \nz
+ _check_general_reg \nxbase
+ _check_num (\offset), -0x100, 0xff
+ .inst 0x85804000 \
+ | (\nz) \
+ | ((\nxbase) << 5) \
+ | (((\offset) & 7) << 10) \
+ | (((\offset) & 0x1f8) << 13)
+.endm
+
+/* STR (predicate): STR P\np, [X\nxbase, #\offset, MUL VL] */
+.macro _sve_str_p np, nxbase, offset=0
+ _sve_check_preg \np
+ _check_general_reg \nxbase
+ _check_num (\offset), -0x100, 0xff
+ .inst 0xe5800000 \
+ | (\np) \
+ | ((\nxbase) << 5) \
+ | (((\offset) & 7) << 10) \
+ | (((\offset) & 0x1f8) << 13)
+.endm
+
+/* LDR (predicate): LDR P\np, [X\nxbase, #\offset, MUL VL] */
+.macro _sve_ldr_p np, nxbase, offset=0
+ _sve_check_preg \np
+ _check_general_reg \nxbase
+ _check_num (\offset), -0x100, 0xff
+ .inst 0x85800000 \
+ | (\np) \
+ | ((\nxbase) << 5) \
+ | (((\offset) & 7) << 10) \
+ | (((\offset) & 0x1f8) << 13)
+.endm
+
+/* RDVL X\nx, #\imm */
+.macro _sve_rdvl nx, imm
+ _check_general_reg \nx
+ _check_num (\imm), -0x20, 0x1f
+ .inst 0x04bf5000 \
+ | (\nx) \
+ | (((\imm) & 0x3f) << 5)
+.endm
+
+/* RDFFR (unpredicated): RDFFR P\np.B */
+.macro _sve_rdffr np
+ _sve_check_preg \np
+ .inst 0x2519f000 \
+ | (\np)
+.endm
+
+/* WRFFR P\np.B */
+.macro _sve_wrffr np
+ _sve_check_preg \np
+ .inst 0x25289000 \
+ | ((\np) << 5)
+.endm
+
+.macro __for from:req, to:req
+ .if (\from) == (\to)
+ _for__body \from
+ .else
+ __for \from, (\from) + ((\to) - (\from)) / 2
+ __for (\from) + ((\to) - (\from)) / 2 + 1, \to
+ .endif
+.endm
+
+.macro _for var:req, from:req, to:req, insn:vararg
+ .macro _for__body \var:req
+ \insn
+ .endm
+
+ __for \from, \to
+
+ .purgem _for__body
+.endm
+
+.macro sve_save nxbase, xpfpsr, nxtmp
+ _for n, 0, 31, _sve_str_v \n, \nxbase, \n - 34
+ _for n, 0, 15, _sve_str_p \n, \nxbase, \n - 16
+ _sve_rdffr 0
+ _sve_str_p 0, \nxbase
+ _sve_ldr_p 0, \nxbase, -16
+
+ mrs x\nxtmp, fpsr
+ str w\nxtmp, [\xpfpsr]
+ mrs x\nxtmp, fpcr
+ str w\nxtmp, [\xpfpsr, #4]
+.endm
+
+.macro sve_load nxbase, xpfpsr, xvqminus1, nxtmp
+ mrs_s x\nxtmp, SYS_ZCR_EL1
+ bic x\nxtmp, x\nxtmp, ZCR_ELx_LEN_MASK
+ orr x\nxtmp, x\nxtmp, \xvqminus1
+ msr_s SYS_ZCR_EL1, x\nxtmp // self-synchronising
+
+ _for n, 0, 31, _sve_ldr_v \n, \nxbase, \n - 34
+ _sve_ldr_p 0, \nxbase
+ _sve_wrffr 0
+ _for n, 0, 15, _sve_ldr_p \n, \nxbase, \n - 16
+
+ ldr w\nxtmp, [\xpfpsr]
+ msr fpsr, x\nxtmp
+ ldr w\nxtmp, [\xpfpsr, #4]
+ msr fpcr, x\nxtmp
+.endm
diff --git a/arch/arm64/kernel/entry-fpsimd.S b/arch/arm64/kernel/entry-fpsimd.S
index 6a27cd6..73f17bf 100644
--- a/arch/arm64/kernel/entry-fpsimd.S
+++ b/arch/arm64/kernel/entry-fpsimd.S
@@ -41,3 +41,20 @@ ENTRY(fpsimd_load_state)
fpsimd_restore x0, 8
ret
ENDPROC(fpsimd_load_state)
+
+#ifdef CONFIG_ARM64_SVE
+ENTRY(sve_save_state)
+ sve_save 0, x1, 2
+ ret
+ENDPROC(sve_save_state)
+
+ENTRY(sve_load_state)
+ sve_load 0, x1, x2, 3
+ ret
+ENDPROC(sve_load_state)
+
+ENTRY(sve_get_vl)
+ _sve_rdvl 0, 1
+ ret
+ENDPROC(sve_get_vl)
+#endif /* CONFIG_ARM64_SVE */
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 09/30] arm64/sve: Low-level SVE architectural state manipulation functions
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Manipulating the SVE architectural state, including the vector and
predicate registers, first-fault register and the vector length,
requires the use of dedicated instructions added by SVE.
This patch adds suitable assembly functions for saving and
restoring the SVE registers and querying the vector length.
Setting of the vector length is done as part of register restore.
Since people building kernels may not all get an SVE-enabled
toolchain for a while, this patch uses macros that generate
explicit opcodes in place of assembler mnemonics.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
---
arch/arm64/include/asm/fpsimd.h | 5 ++
arch/arm64/include/asm/fpsimdmacros.h | 148 ++++++++++++++++++++++++++++++++++
arch/arm64/kernel/entry-fpsimd.S | 17 ++++
3 files changed, 170 insertions(+)
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index 410c481..026a7c7 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -67,6 +67,11 @@ extern void fpsimd_update_current_state(struct fpsimd_state *state);
extern void fpsimd_flush_task_state(struct task_struct *target);
+extern void sve_save_state(void *state, u32 *pfpsr);
+extern void sve_load_state(void const *state, u32 const *pfpsr,
+ unsigned long vq_minus_1);
+extern unsigned int sve_get_vl(void);
+
/* For use by EFI runtime services calls only */
extern void __efi_fpsimd_begin(void);
extern void __efi_fpsimd_end(void);
diff --git a/arch/arm64/include/asm/fpsimdmacros.h b/arch/arm64/include/asm/fpsimdmacros.h
index 0f5fdd3..e050d76 100644
--- a/arch/arm64/include/asm/fpsimdmacros.h
+++ b/arch/arm64/include/asm/fpsimdmacros.h
@@ -75,3 +75,151 @@
ldr w\tmpnr, [\state, #16 * 2 + 4]
fpsimd_restore_fpcr x\tmpnr, \state
.endm
+
+/* Sanity-check macros to help avoid encoding garbage instructions */
+
+.macro _check_general_reg nr
+ .if (\nr) < 0 || (\nr) > 30
+ .error "Bad register number \nr."
+ .endif
+.endm
+
+.macro _sve_check_zreg znr
+ .if (\znr) < 0 || (\znr) > 31
+ .error "Bad Scalable Vector Extension vector register number \znr."
+ .endif
+.endm
+
+.macro _sve_check_preg pnr
+ .if (\pnr) < 0 || (\pnr) > 15
+ .error "Bad Scalable Vector Extension predicate register number \pnr."
+ .endif
+.endm
+
+.macro _check_num n, min, max
+ .if (\n) < (\min) || (\n) > (\max)
+ .error "Number \n out of range [\min,\max]"
+ .endif
+.endm
+
+/* SVE instruction encodings for non-SVE-capable assemblers */
+
+/* STR (vector): STR Z\nz, [X\nxbase, #\offset, MUL VL] */
+.macro _sve_str_v nz, nxbase, offset=0
+ _sve_check_zreg \nz
+ _check_general_reg \nxbase
+ _check_num (\offset), -0x100, 0xff
+ .inst 0xe5804000 \
+ | (\nz) \
+ | ((\nxbase) << 5) \
+ | (((\offset) & 7) << 10) \
+ | (((\offset) & 0x1f8) << 13)
+.endm
+
+/* LDR (vector): LDR Z\nz, [X\nxbase, #\offset, MUL VL] */
+.macro _sve_ldr_v nz, nxbase, offset=0
+ _sve_check_zreg \nz
+ _check_general_reg \nxbase
+ _check_num (\offset), -0x100, 0xff
+ .inst 0x85804000 \
+ | (\nz) \
+ | ((\nxbase) << 5) \
+ | (((\offset) & 7) << 10) \
+ | (((\offset) & 0x1f8) << 13)
+.endm
+
+/* STR (predicate): STR P\np, [X\nxbase, #\offset, MUL VL] */
+.macro _sve_str_p np, nxbase, offset=0
+ _sve_check_preg \np
+ _check_general_reg \nxbase
+ _check_num (\offset), -0x100, 0xff
+ .inst 0xe5800000 \
+ | (\np) \
+ | ((\nxbase) << 5) \
+ | (((\offset) & 7) << 10) \
+ | (((\offset) & 0x1f8) << 13)
+.endm
+
+/* LDR (predicate): LDR P\np, [X\nxbase, #\offset, MUL VL] */
+.macro _sve_ldr_p np, nxbase, offset=0
+ _sve_check_preg \np
+ _check_general_reg \nxbase
+ _check_num (\offset), -0x100, 0xff
+ .inst 0x85800000 \
+ | (\np) \
+ | ((\nxbase) << 5) \
+ | (((\offset) & 7) << 10) \
+ | (((\offset) & 0x1f8) << 13)
+.endm
+
+/* RDVL X\nx, #\imm */
+.macro _sve_rdvl nx, imm
+ _check_general_reg \nx
+ _check_num (\imm), -0x20, 0x1f
+ .inst 0x04bf5000 \
+ | (\nx) \
+ | (((\imm) & 0x3f) << 5)
+.endm
+
+/* RDFFR (unpredicated): RDFFR P\np.B */
+.macro _sve_rdffr np
+ _sve_check_preg \np
+ .inst 0x2519f000 \
+ | (\np)
+.endm
+
+/* WRFFR P\np.B */
+.macro _sve_wrffr np
+ _sve_check_preg \np
+ .inst 0x25289000 \
+ | ((\np) << 5)
+.endm
+
+.macro __for from:req, to:req
+ .if (\from) == (\to)
+ _for__body \from
+ .else
+ __for \from, (\from) + ((\to) - (\from)) / 2
+ __for (\from) + ((\to) - (\from)) / 2 + 1, \to
+ .endif
+.endm
+
+.macro _for var:req, from:req, to:req, insn:vararg
+ .macro _for__body \var:req
+ \insn
+ .endm
+
+ __for \from, \to
+
+ .purgem _for__body
+.endm
+
+.macro sve_save nxbase, xpfpsr, nxtmp
+ _for n, 0, 31, _sve_str_v \n, \nxbase, \n - 34
+ _for n, 0, 15, _sve_str_p \n, \nxbase, \n - 16
+ _sve_rdffr 0
+ _sve_str_p 0, \nxbase
+ _sve_ldr_p 0, \nxbase, -16
+
+ mrs x\nxtmp, fpsr
+ str w\nxtmp, [\xpfpsr]
+ mrs x\nxtmp, fpcr
+ str w\nxtmp, [\xpfpsr, #4]
+.endm
+
+.macro sve_load nxbase, xpfpsr, xvqminus1, nxtmp
+ mrs_s x\nxtmp, SYS_ZCR_EL1
+ bic x\nxtmp, x\nxtmp, ZCR_ELx_LEN_MASK
+ orr x\nxtmp, x\nxtmp, \xvqminus1
+ msr_s SYS_ZCR_EL1, x\nxtmp // self-synchronising
+
+ _for n, 0, 31, _sve_ldr_v \n, \nxbase, \n - 34
+ _sve_ldr_p 0, \nxbase
+ _sve_wrffr 0
+ _for n, 0, 15, _sve_ldr_p \n, \nxbase, \n - 16
+
+ ldr w\nxtmp, [\xpfpsr]
+ msr fpsr, x\nxtmp
+ ldr w\nxtmp, [\xpfpsr, #4]
+ msr fpcr, x\nxtmp
+.endm
diff --git a/arch/arm64/kernel/entry-fpsimd.S b/arch/arm64/kernel/entry-fpsimd.S
index 6a27cd6..73f17bf 100644
--- a/arch/arm64/kernel/entry-fpsimd.S
+++ b/arch/arm64/kernel/entry-fpsimd.S
@@ -41,3 +41,20 @@ ENTRY(fpsimd_load_state)
fpsimd_restore x0, 8
ret
ENDPROC(fpsimd_load_state)
+
+#ifdef CONFIG_ARM64_SVE
+ENTRY(sve_save_state)
+ sve_save 0, x1, 2
+ ret
+ENDPROC(sve_save_state)
+
+ENTRY(sve_load_state)
+ sve_load 0, x1, x2, 3
+ ret
+ENDPROC(sve_load_state)
+
+ENTRY(sve_get_vl)
+ _sve_rdvl 0, 1
+ ret
+ENDPROC(sve_get_vl)
+#endif /* CONFIG_ARM64_SVE */
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 10/30] arm64/sve: Kconfig update and conditional compilation support
2017-10-31 15:50 ` Dave Martin
@ 2017-10-31 15:51 ` Dave Martin
-1 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
This patch adds CONFIG_ARM64_SVE to control building of SVE support
into the kernel, and adds a stub predicate system_supports_sve() to
control conditional compilation and runtime SVE support.
system_supports_sve() just returns false for now: it will be
replaced with a non-trivial implementation in a later patch, once
SVE support is complete enough to be enabled safely.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
arch/arm64/Kconfig | 11 +++++++++++
arch/arm64/include/asm/cpufeature.h | 5 +++++
2 files changed, 16 insertions(+)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 5cfb79d..1046074 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -976,6 +976,17 @@ config ARM64_PMEM
endmenu
+config ARM64_SVE
+ bool "ARM Scalable Vector Extension support"
+ default y
+ help
+ The Scalable Vector Extension (SVE) is an extension to the AArch64
+ execution state which complements and extends the SIMD functionality
+ of the base architecture to support much larger vectors and to enable
+ additional vectorisation opportunities.
+
+ To enable use of this extension on CPUs that implement it, say Y.
+
config ARM64_MODULE_CMODEL_LARGE
bool
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index 428ee1f..4ea3441 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -262,6 +262,11 @@ static inline bool system_uses_ttbr0_pan(void)
!cpus_have_const_cap(ARM64_HAS_PAN);
}
+static inline bool system_supports_sve(void)
+{
+ return false;
+}
+
#endif /* __ASSEMBLY__ */
#endif
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 10/30] arm64/sve: Kconfig update and conditional compilation support
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds CONFIG_ARM64_SVE to control building of SVE support
into the kernel, and adds a stub predicate system_supports_sve() to
control conditional compilation and runtime SVE support.
system_supports_sve() just returns false for now: it will be
replaced with a non-trivial implementation in a later patch, once
SVE support is complete enough to be enabled safely.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
arch/arm64/Kconfig | 11 +++++++++++
arch/arm64/include/asm/cpufeature.h | 5 +++++
2 files changed, 16 insertions(+)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 5cfb79d..1046074 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -976,6 +976,17 @@ config ARM64_PMEM
endmenu
+config ARM64_SVE
+ bool "ARM Scalable Vector Extension support"
+ default y
+ help
+ The Scalable Vector Extension (SVE) is an extension to the AArch64
+ execution state which complements and extends the SIMD functionality
+ of the base architecture to support much larger vectors and to enable
+ additional vectorisation opportunities.
+
+ To enable use of this extension on CPUs that implement it, say Y.
+
config ARM64_MODULE_CMODEL_LARGE
bool
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index 428ee1f..4ea3441 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -262,6 +262,11 @@ static inline bool system_uses_ttbr0_pan(void)
!cpus_have_const_cap(ARM64_HAS_PAN);
}
+static inline bool system_supports_sve(void)
+{
+ return false;
+}
+
#endif /* __ASSEMBLY__ */
#endif
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 11/30] arm64/sve: Signal frame and context structure definition
2017-10-31 15:50 ` Dave Martin
@ 2017-10-31 15:51 ` Dave Martin
-1 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
This patch defines the representation that will be used for the SVE
register state in the signal frame, and implements support for
saving and restoring the SVE registers around signals.
The same layout will also be used for the in-kernel task state.
Due to the variability of the SVE vector length, it is not possible
to define a fixed C struct to describe all the registers. Instead,
Macros are defined in sigcontext.h to facilitate access to the
parts of the structure.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
---
arch/arm64/include/uapi/asm/sigcontext.h | 117 ++++++++++++++++++++++++++++++-
1 file changed, 116 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/include/uapi/asm/sigcontext.h b/arch/arm64/include/uapi/asm/sigcontext.h
index f0a76b9..7654a81 100644
--- a/arch/arm64/include/uapi/asm/sigcontext.h
+++ b/arch/arm64/include/uapi/asm/sigcontext.h
@@ -16,6 +16,8 @@
#ifndef _UAPI__ASM_SIGCONTEXT_H
#define _UAPI__ASM_SIGCONTEXT_H
+#ifndef __ASSEMBLY__
+
#include <linux/types.h>
/*
@@ -41,10 +43,11 @@ struct sigcontext {
*
* 0x210 fpsimd_context
* 0x10 esr_context
+ * 0x8a0 sve_context (vl <= 64) (optional)
* 0x20 extra_context (optional)
* 0x10 terminator (null _aarch64_ctx)
*
- * 0xdb0 (reserved for future allocation)
+ * 0x510 (reserved for future allocation)
*
* New records that can exceed this space need to be opt-in for userspace, so
* that an expanded signal frame is not generated unexpectedly. The mechanism
@@ -116,4 +119,116 @@ struct extra_context {
__u32 __reserved[3];
};
+#define SVE_MAGIC 0x53564501
+
+struct sve_context {
+ struct _aarch64_ctx head;
+ __u16 vl;
+ __u16 __reserved[3];
+};
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * The SVE architecture leaves space for future expansion of the
+ * vector length beyond its initial architectural limit of 2048 bits
+ * (16 quadwords).
+ */
+#define SVE_VQ_BYTES 16 /* number of bytes per quadword */
+
+#define SVE_VQ_MIN 1
+#define SVE_VQ_MAX 512
+
+#define SVE_VL_MIN (SVE_VQ_MIN * SVE_VQ_BYTES)
+#define SVE_VL_MAX (SVE_VQ_MAX * SVE_VQ_BYTES)
+
+#define SVE_NUM_ZREGS 32
+#define SVE_NUM_PREGS 16
+
+#define sve_vl_valid(vl) \
+ ((vl) % SVE_VQ_BYTES == 0 && (vl) >= SVE_VL_MIN && (vl) <= SVE_VL_MAX)
+#define sve_vq_from_vl(vl) ((vl) / SVE_VQ_BYTES)
+#define sve_vl_from_vq(vq) ((vq) * SVE_VQ_BYTES)
+
+/*
+ * If the SVE registers are currently live for the thread at signal delivery,
+ * sve_context.head.size >=
+ * SVE_SIG_CONTEXT_SIZE(sve_vq_from_vl(sve_context.vl))
+ * and the register data may be accessed using the SVE_SIG_*() macros.
+ *
+ * If sve_context.head.size <
+ * SVE_SIG_CONTEXT_SIZE(sve_vq_from_vl(sve_context.vl)),
+ * the SVE registers were not live for the thread and no register data
+ * is included: in this case, the SVE_SIG_*() macros should not be
+ * used except for this check.
+ *
+ * The same convention applies when returning from a signal: a caller
+ * will need to remove or resize the sve_context block if it wants to
+ * make the SVE registers live when they were previously non-live or
+ * vice-versa. This may require the the caller to allocate fresh
+ * memory and/or move other context blocks in the signal frame.
+ *
+ * Changing the vector length during signal return is not permitted:
+ * sve_context.vl must equal the thread's current vector length when
+ * doing a sigreturn.
+ *
+ *
+ * Note: for all these macros, the "vq" argument denotes the SVE
+ * vector length in quadwords (i.e., units of 128 bits).
+ *
+ * The correct way to obtain vq is to use sve_vq_from_vl(vl). The
+ * result is valid if and only if sve_vl_valid(vl) is true. This is
+ * guaranteed for a struct sve_context written by the kernel.
+ *
+ *
+ * Additional macros describe the contents and layout of the payload.
+ * For each, SVE_SIG_x_OFFSET(args) is the start offset relative to
+ * the start of struct sve_context, and SVE_SIG_x_SIZE(args) is the
+ * size in bytes:
+ *
+ * x type description
+ * - ---- -----------
+ * REGS the entire SVE context
+ *
+ * ZREGS __uint128_t[SVE_NUM_ZREGS][vq] all Z-registers
+ * ZREG __uint128_t[vq] individual Z-register Zn
+ *
+ * PREGS uint16_t[SVE_NUM_PREGS][vq] all P-registers
+ * PREG uint16_t[vq] individual P-register Pn
+ *
+ * FFR uint16_t[vq] first-fault status register
+ *
+ * Additional data might be appended in the future.
+ */
+
+#define SVE_SIG_ZREG_SIZE(vq) ((__u32)(vq) * SVE_VQ_BYTES)
+#define SVE_SIG_PREG_SIZE(vq) ((__u32)(vq) * (SVE_VQ_BYTES / 8))
+#define SVE_SIG_FFR_SIZE(vq) SVE_SIG_PREG_SIZE(vq)
+
+#define SVE_SIG_REGS_OFFSET \
+ ((sizeof(struct sve_context) + (SVE_VQ_BYTES - 1)) \
+ / SVE_VQ_BYTES * SVE_VQ_BYTES)
+
+#define SVE_SIG_ZREGS_OFFSET SVE_SIG_REGS_OFFSET
+#define SVE_SIG_ZREG_OFFSET(vq, n) \
+ (SVE_SIG_ZREGS_OFFSET + SVE_SIG_ZREG_SIZE(vq) * (n))
+#define SVE_SIG_ZREGS_SIZE(vq) \
+ (SVE_SIG_ZREG_OFFSET(vq, SVE_NUM_ZREGS) - SVE_SIG_ZREGS_OFFSET)
+
+#define SVE_SIG_PREGS_OFFSET(vq) \
+ (SVE_SIG_ZREGS_OFFSET + SVE_SIG_ZREGS_SIZE(vq))
+#define SVE_SIG_PREG_OFFSET(vq, n) \
+ (SVE_SIG_PREGS_OFFSET(vq) + SVE_SIG_PREG_SIZE(vq) * (n))
+#define SVE_SIG_PREGS_SIZE(vq) \
+ (SVE_SIG_PREG_OFFSET(vq, SVE_NUM_PREGS) - SVE_SIG_PREGS_OFFSET(vq))
+
+#define SVE_SIG_FFR_OFFSET(vq) \
+ (SVE_SIG_PREGS_OFFSET(vq) + SVE_SIG_PREGS_SIZE(vq))
+
+#define SVE_SIG_REGS_SIZE(vq) \
+ (SVE_SIG_FFR_OFFSET(vq) + SVE_SIG_FFR_SIZE(vq) - SVE_SIG_REGS_OFFSET)
+
+#define SVE_SIG_CONTEXT_SIZE(vq) (SVE_SIG_REGS_OFFSET + SVE_SIG_REGS_SIZE(vq))
+
+
#endif /* _UAPI__ASM_SIGCONTEXT_H */
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 11/30] arm64/sve: Signal frame and context structure definition
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
This patch defines the representation that will be used for the SVE
register state in the signal frame, and implements support for
saving and restoring the SVE registers around signals.
The same layout will also be used for the in-kernel task state.
Due to the variability of the SVE vector length, it is not possible
to define a fixed C struct to describe all the registers. Instead,
Macros are defined in sigcontext.h to facilitate access to the
parts of the structure.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alex Benn?e <alex.bennee@linaro.org>
---
arch/arm64/include/uapi/asm/sigcontext.h | 117 ++++++++++++++++++++++++++++++-
1 file changed, 116 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/include/uapi/asm/sigcontext.h b/arch/arm64/include/uapi/asm/sigcontext.h
index f0a76b9..7654a81 100644
--- a/arch/arm64/include/uapi/asm/sigcontext.h
+++ b/arch/arm64/include/uapi/asm/sigcontext.h
@@ -16,6 +16,8 @@
#ifndef _UAPI__ASM_SIGCONTEXT_H
#define _UAPI__ASM_SIGCONTEXT_H
+#ifndef __ASSEMBLY__
+
#include <linux/types.h>
/*
@@ -41,10 +43,11 @@ struct sigcontext {
*
* 0x210 fpsimd_context
* 0x10 esr_context
+ * 0x8a0 sve_context (vl <= 64) (optional)
* 0x20 extra_context (optional)
* 0x10 terminator (null _aarch64_ctx)
*
- * 0xdb0 (reserved for future allocation)
+ * 0x510 (reserved for future allocation)
*
* New records that can exceed this space need to be opt-in for userspace, so
* that an expanded signal frame is not generated unexpectedly. The mechanism
@@ -116,4 +119,116 @@ struct extra_context {
__u32 __reserved[3];
};
+#define SVE_MAGIC 0x53564501
+
+struct sve_context {
+ struct _aarch64_ctx head;
+ __u16 vl;
+ __u16 __reserved[3];
+};
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * The SVE architecture leaves space for future expansion of the
+ * vector length beyond its initial architectural limit of 2048 bits
+ * (16 quadwords).
+ */
+#define SVE_VQ_BYTES 16 /* number of bytes per quadword */
+
+#define SVE_VQ_MIN 1
+#define SVE_VQ_MAX 512
+
+#define SVE_VL_MIN (SVE_VQ_MIN * SVE_VQ_BYTES)
+#define SVE_VL_MAX (SVE_VQ_MAX * SVE_VQ_BYTES)
+
+#define SVE_NUM_ZREGS 32
+#define SVE_NUM_PREGS 16
+
+#define sve_vl_valid(vl) \
+ ((vl) % SVE_VQ_BYTES == 0 && (vl) >= SVE_VL_MIN && (vl) <= SVE_VL_MAX)
+#define sve_vq_from_vl(vl) ((vl) / SVE_VQ_BYTES)
+#define sve_vl_from_vq(vq) ((vq) * SVE_VQ_BYTES)
+
+/*
+ * If the SVE registers are currently live for the thread@signal delivery,
+ * sve_context.head.size >=
+ * SVE_SIG_CONTEXT_SIZE(sve_vq_from_vl(sve_context.vl))
+ * and the register data may be accessed using the SVE_SIG_*() macros.
+ *
+ * If sve_context.head.size <
+ * SVE_SIG_CONTEXT_SIZE(sve_vq_from_vl(sve_context.vl)),
+ * the SVE registers were not live for the thread and no register data
+ * is included: in this case, the SVE_SIG_*() macros should not be
+ * used except for this check.
+ *
+ * The same convention applies when returning from a signal: a caller
+ * will need to remove or resize the sve_context block if it wants to
+ * make the SVE registers live when they were previously non-live or
+ * vice-versa. This may require the the caller to allocate fresh
+ * memory and/or move other context blocks in the signal frame.
+ *
+ * Changing the vector length during signal return is not permitted:
+ * sve_context.vl must equal the thread's current vector length when
+ * doing a sigreturn.
+ *
+ *
+ * Note: for all these macros, the "vq" argument denotes the SVE
+ * vector length in quadwords (i.e., units of 128 bits).
+ *
+ * The correct way to obtain vq is to use sve_vq_from_vl(vl). The
+ * result is valid if and only if sve_vl_valid(vl) is true. This is
+ * guaranteed for a struct sve_context written by the kernel.
+ *
+ *
+ * Additional macros describe the contents and layout of the payload.
+ * For each, SVE_SIG_x_OFFSET(args) is the start offset relative to
+ * the start of struct sve_context, and SVE_SIG_x_SIZE(args) is the
+ * size in bytes:
+ *
+ * x type description
+ * - ---- -----------
+ * REGS the entire SVE context
+ *
+ * ZREGS __uint128_t[SVE_NUM_ZREGS][vq] all Z-registers
+ * ZREG __uint128_t[vq] individual Z-register Zn
+ *
+ * PREGS uint16_t[SVE_NUM_PREGS][vq] all P-registers
+ * PREG uint16_t[vq] individual P-register Pn
+ *
+ * FFR uint16_t[vq] first-fault status register
+ *
+ * Additional data might be appended in the future.
+ */
+
+#define SVE_SIG_ZREG_SIZE(vq) ((__u32)(vq) * SVE_VQ_BYTES)
+#define SVE_SIG_PREG_SIZE(vq) ((__u32)(vq) * (SVE_VQ_BYTES / 8))
+#define SVE_SIG_FFR_SIZE(vq) SVE_SIG_PREG_SIZE(vq)
+
+#define SVE_SIG_REGS_OFFSET \
+ ((sizeof(struct sve_context) + (SVE_VQ_BYTES - 1)) \
+ / SVE_VQ_BYTES * SVE_VQ_BYTES)
+
+#define SVE_SIG_ZREGS_OFFSET SVE_SIG_REGS_OFFSET
+#define SVE_SIG_ZREG_OFFSET(vq, n) \
+ (SVE_SIG_ZREGS_OFFSET + SVE_SIG_ZREG_SIZE(vq) * (n))
+#define SVE_SIG_ZREGS_SIZE(vq) \
+ (SVE_SIG_ZREG_OFFSET(vq, SVE_NUM_ZREGS) - SVE_SIG_ZREGS_OFFSET)
+
+#define SVE_SIG_PREGS_OFFSET(vq) \
+ (SVE_SIG_ZREGS_OFFSET + SVE_SIG_ZREGS_SIZE(vq))
+#define SVE_SIG_PREG_OFFSET(vq, n) \
+ (SVE_SIG_PREGS_OFFSET(vq) + SVE_SIG_PREG_SIZE(vq) * (n))
+#define SVE_SIG_PREGS_SIZE(vq) \
+ (SVE_SIG_PREG_OFFSET(vq, SVE_NUM_PREGS) - SVE_SIG_PREGS_OFFSET(vq))
+
+#define SVE_SIG_FFR_OFFSET(vq) \
+ (SVE_SIG_PREGS_OFFSET(vq) + SVE_SIG_PREGS_SIZE(vq))
+
+#define SVE_SIG_REGS_SIZE(vq) \
+ (SVE_SIG_FFR_OFFSET(vq) + SVE_SIG_FFR_SIZE(vq) - SVE_SIG_REGS_OFFSET)
+
+#define SVE_SIG_CONTEXT_SIZE(vq) (SVE_SIG_REGS_OFFSET + SVE_SIG_REGS_SIZE(vq))
+
+
#endif /* _UAPI__ASM_SIGCONTEXT_H */
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 12/30] arm64/sve: Low-level CPU setup
2017-10-31 15:50 ` Dave Martin
@ 2017-10-31 15:51 ` Dave Martin
-1 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
To enable the kernel to use SVE, SVE traps from EL1 to EL2 must be
disabled. To take maximum advantage of the hardware, the full
available vector length also needs to be enabled for EL1 by
programming ZCR_EL2.LEN. (The kernel will program ZCR_EL1.LEN as
required, but this cannot override the limit set by ZCR_EL2.)
This patch makes the appropriate changes to the EL2 early setup
code.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
---
**Dropped at v3** Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
(Due to significant changes to the logic.)
---
arch/arm64/kernel/head.S | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index cfa90a4..67e86a0 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -524,8 +524,19 @@ CPU_LE( movk x0, #0x30d0, lsl #16 ) // Clear EE and E0E on LE systems
mov x0, #0x33ff
msr cptr_el2, x0 // Disable copro. traps to EL2
+ /* SVE register access */
+ mrs x1, id_aa64pfr0_el1
+ ubfx x1, x1, #ID_AA64PFR0_SVE_SHIFT, #4
+ cbz x1, 7f
+
+ bic x0, x0, #CPTR_EL2_TZ // Also disable SVE traps
+ msr cptr_el2, x0 // Disable copro. traps to EL2
+ isb
+ mov x1, #ZCR_ELx_LEN_MASK // SVE: Enable full vector
+ msr_s SYS_ZCR_EL2, x1 // length for EL1.
+
/* Hypervisor stub */
- adr_l x0, __hyp_stub_vectors
+7: adr_l x0, __hyp_stub_vectors
msr vbar_el2, x0
/* spsr */
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 12/30] arm64/sve: Low-level CPU setup
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
To enable the kernel to use SVE, SVE traps from EL1 to EL2 must be
disabled. To take maximum advantage of the hardware, the full
available vector length also needs to be enabled for EL1 by
programming ZCR_EL2.LEN. (The kernel will program ZCR_EL1.LEN as
required, but this cannot override the limit set by ZCR_EL2.)
This patch makes the appropriate changes to the EL2 early setup
code.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alex Benn?e <alex.bennee@linaro.org>
---
**Dropped at v3** Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
(Due to significant changes to the logic.)
---
arch/arm64/kernel/head.S | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index cfa90a4..67e86a0 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -524,8 +524,19 @@ CPU_LE( movk x0, #0x30d0, lsl #16 ) // Clear EE and E0E on LE systems
mov x0, #0x33ff
msr cptr_el2, x0 // Disable copro. traps to EL2
+ /* SVE register access */
+ mrs x1, id_aa64pfr0_el1
+ ubfx x1, x1, #ID_AA64PFR0_SVE_SHIFT, #4
+ cbz x1, 7f
+
+ bic x0, x0, #CPTR_EL2_TZ // Also disable SVE traps
+ msr cptr_el2, x0 // Disable copro. traps to EL2
+ isb
+ mov x1, #ZCR_ELx_LEN_MASK // SVE: Enable full vector
+ msr_s SYS_ZCR_EL2, x1 // length for EL1.
+
/* Hypervisor stub */
- adr_l x0, __hyp_stub_vectors
+7: adr_l x0, __hyp_stub_vectors
msr vbar_el2, x0
/* spsr */
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 13/30] arm64/sve: Core task context handling
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-arch, Okamoto Takayuki, libc-alpha, Ard Biesheuvel,
Szabolcs Nagy, Catalin Marinas, Will Deacon, kvmarm
This patch adds the core support for switching and managing the SVE
architectural state of user tasks.
Calls to the existing FPSIMD low-level save/restore functions are
factored out as new functions task_fpsimd_{save,load}(), since SVE
now dynamically may or may not need to be handled at these points
depending on the kernel configuration, hardware features discovered
at boot, and the runtime state of the task. To make these
decisions as fast as possible, const cpucaps are used where
feasible, via the system_supports_sve() helper.
The SVE registers are only tracked for threads that have explicitly
used SVE, indicated by the new thread flag TIF_SVE. Otherwise, the
FPSIMD view of the architectural state is stored in
thread.fpsimd_state as usual.
When in use, the SVE registers are not stored directly in
thread_struct due to their potentially large and variable size.
Because the task_struct slab allocator must be configured very
early during kernel boot, it is also tricky to configure it
correctly to match the maximum vector length provided by the
hardware, since this depends on examining secondary CPUs as well as
the primary. Instead, a pointer sve_state in thread_struct points
to a dynamically allocated buffer containing the SVE register data,
and code is added to allocate and free this buffer at appropriate
times.
TIF_SVE is set when taking an SVE access trap from userspace, if
suitable hardware support has been detected. This enables SVE for
the thread: a subsequent return to userspace will disable the trap
accordingly. If such a trap is taken without sufficient system-
wide hardware support, SIGILL is sent to the thread instead as if
an undefined instruction had been executed: this may happen if
userspace tries to use SVE in a system where not all CPUs support
it for example.
The kernel will clear TIF_SVE and disable SVE for the thread
whenever an explicit syscall is made by userspace. For backwards
compatibility reasons and conformance with the spirit of the base
AArch64 procedure call standard, the subset of the SVE register
state that aliases the FPSIMD registers is still preserved across a
syscall even if this happens. The remainder of the SVE register
state logically becomes zero at syscall entry, though the actual
zeroing work is currently deferred until the thread next tries to
use SVE, causing another trap to the kernel. This implementation
is suboptimal: in the future, the fastpath case may be optimised
to zero the registers in-place and leave SVE enabled for the task,
where beneficial.
TIF_SVE is also cleared in the following slowpath cases, which are
taken as reasonable hints that the task may no longer use SVE:
* exec
* fork and clone
Code is added to sync data between thread.fpsimd_state and
thread.sve_state whenever enabling/disabling SVE, in a manner
consistent with the SVE architectural programmer's model.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Alex Bennée <alex.bennee@linaro.org>
---
Kept Catalin's Reviewed-by, since this is a trivial change.
Changes since v4
----------------
Miscellaneous:
* Mark do_sve_acc() as asmlinkage.
(Semantic correctness only; no functional impact.)
---
arch/arm64/include/asm/fpsimd.h | 16 ++
arch/arm64/include/asm/processor.h | 2 +
arch/arm64/include/asm/thread_info.h | 4 +
arch/arm64/include/asm/traps.h | 2 +
arch/arm64/kernel/entry.S | 39 ++++-
arch/arm64/kernel/fpsimd.c | 324 ++++++++++++++++++++++++++++++++++-
arch/arm64/kernel/process.c | 24 +++
arch/arm64/kernel/traps.c | 6 +-
8 files changed, 406 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index 026a7c7..5655fe1 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -20,6 +20,8 @@
#ifndef __ASSEMBLY__
+#include <linux/stddef.h>
+
/*
* FP/SIMD storage area has:
* - FPSR and FPCR
@@ -72,6 +74,20 @@ extern void sve_load_state(void const *state, u32 const *pfpsr,
unsigned long vq_minus_1);
extern unsigned int sve_get_vl(void);
+#ifdef CONFIG_ARM64_SVE
+
+extern size_t sve_state_size(struct task_struct const *task);
+
+extern void sve_alloc(struct task_struct *task);
+extern void fpsimd_release_task(struct task_struct *task);
+
+#else /* ! CONFIG_ARM64_SVE */
+
+static inline void sve_alloc(struct task_struct *task) { }
+static inline void fpsimd_release_task(struct task_struct *task) { }
+
+#endif /* ! CONFIG_ARM64_SVE */
+
/* For use by EFI runtime services calls only */
extern void __efi_fpsimd_begin(void);
extern void __efi_fpsimd_end(void);
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index 7dddca2..e2f575d 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -105,6 +105,8 @@ struct thread_struct {
unsigned long tp2_value;
#endif
struct fpsimd_state fpsimd_state;
+ void *sve_state; /* SVE registers, if any */
+ unsigned int sve_vl; /* SVE vector length */
unsigned long fault_address; /* fault info */
unsigned long fault_code; /* ESR_EL1 value */
struct debug_info debug; /* debugging */
diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
index ddded64..92b7b48 100644
--- a/arch/arm64/include/asm/thread_info.h
+++ b/arch/arm64/include/asm/thread_info.h
@@ -63,6 +63,8 @@ struct thread_info {
void arch_setup_new_exec(void);
#define arch_setup_new_exec arch_setup_new_exec
+void arch_release_task_struct(struct task_struct *tsk);
+
#endif
/*
@@ -92,6 +94,7 @@ void arch_setup_new_exec(void);
#define TIF_RESTORE_SIGMASK 20
#define TIF_SINGLESTEP 21
#define TIF_32BIT 22 /* 32bit process */
+#define TIF_SVE 23 /* Scalable Vector Extension in use */
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
@@ -105,6 +108,7 @@ void arch_setup_new_exec(void);
#define _TIF_UPROBE (1 << TIF_UPROBE)
#define _TIF_FSCHECK (1 << TIF_FSCHECK)
#define _TIF_32BIT (1 << TIF_32BIT)
+#define _TIF_SVE (1 << TIF_SVE)
#define _TIF_WORK_MASK (_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
_TIF_NOTIFY_RESUME | _TIF_FOREIGN_FPSTATE | \
diff --git a/arch/arm64/include/asm/traps.h b/arch/arm64/include/asm/traps.h
index 45e3da3..1696f9d 100644
--- a/arch/arm64/include/asm/traps.h
+++ b/arch/arm64/include/asm/traps.h
@@ -34,6 +34,8 @@ struct undef_hook {
void register_undef_hook(struct undef_hook *hook);
void unregister_undef_hook(struct undef_hook *hook);
+void force_signal_inject(int signal, int code, struct pt_regs *regs,
+ unsigned long address);
void arm64_notify_segfault(struct pt_regs *regs, unsigned long addr);
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index f5e851e..56e848f 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -607,6 +607,8 @@ el0_sync:
b.eq el0_ia
cmp x24, #ESR_ELx_EC_FP_ASIMD // FP/ASIMD access
b.eq el0_fpsimd_acc
+ cmp x24, #ESR_ELx_EC_SVE // SVE access
+ b.eq el0_sve_acc
cmp x24, #ESR_ELx_EC_FP_EXC64 // FP/ASIMD exception
b.eq el0_fpsimd_exc
cmp x24, #ESR_ELx_EC_SYS64 // configurable trap
@@ -658,6 +660,7 @@ el0_svc_compat:
/*
* AArch32 syscall handling
*/
+ ldr x16, [tsk, #TSK_TI_FLAGS] // load thread flags
adrp stbl, compat_sys_call_table // load compat syscall table pointer
mov wscno, w7 // syscall number in w7 (r7)
mov wsc_nr, #__NR_compat_syscalls
@@ -705,9 +708,19 @@ el0_fpsimd_acc:
mov x1, sp
bl do_fpsimd_acc
b ret_to_user
+el0_sve_acc:
+ /*
+ * Scalable Vector Extension access
+ */
+ enable_dbg_and_irq
+ ct_user_exit
+ mov x0, x25
+ mov x1, sp
+ bl do_sve_acc
+ b ret_to_user
el0_fpsimd_exc:
/*
- * Floating Point or Advanced SIMD exception
+ * Floating Point, Advanced SIMD or SVE exception
*/
enable_dbg
ct_user_exit
@@ -835,16 +848,36 @@ ENDPROC(ret_to_user)
*/
.align 6
el0_svc:
+ ldr x16, [tsk, #TSK_TI_FLAGS] // load thread flags
adrp stbl, sys_call_table // load syscall table pointer
mov wscno, w8 // syscall number in w8
mov wsc_nr, #__NR_syscalls
+
+#ifndef CONFIG_ARM64_SVE
+ b el0_svc_naked
+#else
+ tbz x16, #TIF_SVE, el0_svc_naked // Skip unless TIF_SVE set:
+ bic x16, x16, #_TIF_SVE // discard SVE state
+ str x16, [tsk, #TSK_TI_FLAGS]
+
+ /*
+ * task_fpsimd_load() won't be called to update CPACR_EL1 in
+ * ret_to_user unless TIF_FOREIGN_FPSTATE is still set, which only
+ * happens if a context switch or kernel_neon_begin() or context
+ * modification (sigreturn, ptrace) intervenes.
+ * So, ensure that CPACR_EL1 is already correct for the fast-path case:
+ */
+ mrs x9, cpacr_el1
+ bic x9, x9, #CPACR_EL1_ZEN_EL0EN // disable SVE for el0
+ msr cpacr_el1, x9 // synchronised by eret to el0
+#endif /* CONFIG_ARM64_SVE */
+
el0_svc_naked: // compat entry point
stp x0, xscno, [sp, #S_ORIG_X0] // save the original x0 and syscall number
enable_dbg_and_irq
ct_user_exit 1
- ldr x16, [tsk, #TSK_TI_FLAGS] // check for syscall hooks
- tst x16, #_TIF_SYSCALL_WORK
+ tst x16, #_TIF_SYSCALL_WORK // check for syscall hooks
b.ne __sys_trace
cmp wscno, wsc_nr // check upper syscall limit
b.hs ni_sys
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 2baba0d..787f5d3 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -18,19 +18,27 @@
*/
#include <linux/bottom_half.h>
+#include <linux/bug.h>
+#include <linux/compat.h>
#include <linux/cpu.h>
#include <linux/cpu_pm.h>
#include <linux/kernel.h>
#include <linux/linkage.h>
+#include <linux/irqflags.h>
#include <linux/init.h>
#include <linux/percpu.h>
#include <linux/preempt.h>
+#include <linux/ptrace.h>
#include <linux/sched/signal.h>
#include <linux/signal.h>
+#include <linux/slab.h>
#include <asm/fpsimd.h>
#include <asm/cputype.h>
#include <asm/simd.h>
+#include <asm/sigcontext.h>
+#include <asm/sysreg.h>
+#include <asm/traps.h>
#define FPEXC_IOF (1 << 0)
#define FPEXC_DZF (1 << 1)
@@ -40,6 +48,8 @@
#define FPEXC_IDF (1 << 7)
/*
+ * (Note: in this discussion, statements about FPSIMD apply equally to SVE.)
+ *
* In order to reduce the number of times the FPSIMD state is needlessly saved
* and restored, we need to keep track of two things:
* (a) for each task, we need to remember which CPU was the last one to have
@@ -101,6 +111,279 @@
static DEFINE_PER_CPU(struct fpsimd_state *, fpsimd_last_state);
/*
+ * Call __sve_free() directly only if you know task can't be scheduled
+ * or preempted.
+ */
+static void __sve_free(struct task_struct *task)
+{
+ kfree(task->thread.sve_state);
+ task->thread.sve_state = NULL;
+}
+
+static void sve_free(struct task_struct *task)
+{
+ WARN_ON(test_tsk_thread_flag(task, TIF_SVE));
+
+ __sve_free(task);
+}
+
+
+/* Offset of FFR in the SVE register dump */
+static size_t sve_ffr_offset(int vl)
+{
+ return SVE_SIG_FFR_OFFSET(sve_vq_from_vl(vl)) - SVE_SIG_REGS_OFFSET;
+}
+
+static void *sve_pffr(struct task_struct *task)
+{
+ return (char *)task->thread.sve_state +
+ sve_ffr_offset(task->thread.sve_vl);
+}
+
+static void change_cpacr(u64 val, u64 mask)
+{
+ u64 cpacr = read_sysreg(CPACR_EL1);
+ u64 new = (cpacr & ~mask) | val;
+
+ if (new != cpacr)
+ write_sysreg(new, CPACR_EL1);
+}
+
+static void sve_user_disable(void)
+{
+ change_cpacr(0, CPACR_EL1_ZEN_EL0EN);
+}
+
+static void sve_user_enable(void)
+{
+ change_cpacr(CPACR_EL1_ZEN_EL0EN, CPACR_EL1_ZEN_EL0EN);
+}
+
+/*
+ * TIF_SVE controls whether a task can use SVE without trapping while
+ * in userspace, and also the way a task's FPSIMD/SVE state is stored
+ * in thread_struct.
+ *
+ * The kernel uses this flag to track whether a user task is actively
+ * using SVE, and therefore whether full SVE register state needs to
+ * be tracked. If not, the cheaper FPSIMD context handling code can
+ * be used instead of the more costly SVE equivalents.
+ *
+ * * TIF_SVE set:
+ *
+ * The task can execute SVE instructions while in userspace without
+ * trapping to the kernel.
+ *
+ * When stored, Z0-Z31 (incorporating Vn in bits[127:0] or the
+ * corresponding Zn), P0-P15 and FFR are encoded in in
+ * task->thread.sve_state, formatted appropriately for vector
+ * length task->thread.sve_vl.
+ *
+ * task->thread.sve_state must point to a valid buffer at least
+ * sve_state_size(task) bytes in size.
+ *
+ * During any syscall, the kernel may optionally clear TIF_SVE and
+ * discard the vector state except for the FPSIMD subset.
+ *
+ * * TIF_SVE clear:
+ *
+ * An attempt by the user task to execute an SVE instruction causes
+ * do_sve_acc() to be called, which does some preparation and then
+ * sets TIF_SVE.
+ *
+ * When stored, FPSIMD registers V0-V31 are encoded in
+ * task->fpsimd_state; bits [max : 128] for each of Z0-Z31 are
+ * logically zero but not stored anywhere; P0-P15 and FFR are not
+ * stored and have unspecified values from userspace's point of
+ * view. For hygiene purposes, the kernel zeroes them on next use,
+ * but userspace is discouraged from relying on this.
+ *
+ * task->thread.sve_state does not need to be non-NULL, valid or any
+ * particular size: it must not be dereferenced.
+ *
+ * * FPSR and FPCR are always stored in task->fpsimd_state irrespctive of
+ * whether TIF_SVE is clear or set, since these are not vector length
+ * dependent.
+ */
+
+/*
+ * Update current's FPSIMD/SVE registers from thread_struct.
+ *
+ * This function should be called only when the FPSIMD/SVE state in
+ * thread_struct is known to be up to date, when preparing to enter
+ * userspace.
+ *
+ * Softirqs (and preemption) must be disabled.
+ */
+static void task_fpsimd_load(void)
+{
+ WARN_ON(!in_softirq() && !irqs_disabled());
+
+ if (system_supports_sve() && test_thread_flag(TIF_SVE))
+ sve_load_state(sve_pffr(current),
+ ¤t->thread.fpsimd_state.fpsr,
+ sve_vq_from_vl(current->thread.sve_vl) - 1);
+ else
+ fpsimd_load_state(¤t->thread.fpsimd_state);
+
+ if (system_supports_sve()) {
+ /* Toggle SVE trapping for userspace if needed */
+ if (test_thread_flag(TIF_SVE))
+ sve_user_enable();
+ else
+ sve_user_disable();
+
+ /* Serialised by exception return to user */
+ }
+}
+
+/*
+ * Ensure current's FPSIMD/SVE storage in thread_struct is up to date
+ * with respect to the CPU registers.
+ *
+ * Softirqs (and preemption) must be disabled.
+ */
+static void task_fpsimd_save(void)
+{
+ WARN_ON(!in_softirq() && !irqs_disabled());
+
+ if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
+ if (system_supports_sve() && test_thread_flag(TIF_SVE)) {
+ if (WARN_ON(sve_get_vl() != current->thread.sve_vl)) {
+ /*
+ * Can't save the user regs, so current would
+ * re-enter user with corrupt state.
+ * There's no way to recover, so kill it:
+ */
+ force_signal_inject(
+ SIGKILL, 0, current_pt_regs(), 0);
+ return;
+ }
+
+ sve_save_state(sve_pffr(current),
+ ¤t->thread.fpsimd_state.fpsr);
+ } else
+ fpsimd_save_state(¤t->thread.fpsimd_state);
+ }
+}
+
+#define ZREG(sve_state, vq, n) ((char *)(sve_state) + \
+ (SVE_SIG_ZREG_OFFSET(vq, n) - SVE_SIG_REGS_OFFSET))
+
+/*
+ * Transfer the FPSIMD state in task->thread.fpsimd_state to
+ * task->thread.sve_state.
+ *
+ * Task can be a non-runnable task, or current. In the latter case,
+ * softirqs (and preemption) must be disabled.
+ * task->thread.sve_state must point to at least sve_state_size(task)
+ * bytes of allocated kernel memory.
+ * task->thread.fpsimd_state must be up to date before calling this function.
+ */
+static void fpsimd_to_sve(struct task_struct *task)
+{
+ unsigned int vq;
+ void *sst = task->thread.sve_state;
+ struct fpsimd_state const *fst = &task->thread.fpsimd_state;
+ unsigned int i;
+
+ if (!system_supports_sve())
+ return;
+
+ vq = sve_vq_from_vl(task->thread.sve_vl);
+ for (i = 0; i < 32; ++i)
+ memcpy(ZREG(sst, vq, i), &fst->vregs[i],
+ sizeof(fst->vregs[i]));
+}
+
+#ifdef CONFIG_ARM64_SVE
+
+/*
+ * Return how many bytes of memory are required to store the full SVE
+ * state for task, given task's currently configured vector length.
+ */
+size_t sve_state_size(struct task_struct const *task)
+{
+ return SVE_SIG_REGS_SIZE(sve_vq_from_vl(task->thread.sve_vl));
+}
+
+/*
+ * Ensure that task->thread.sve_state is allocated and sufficiently large.
+ *
+ * This function should be used only in preparation for replacing
+ * task->thread.sve_state with new data. The memory is always zeroed
+ * here to prevent stale data from showing through: this is done in
+ * the interest of testability and predictability: except in the
+ * do_sve_acc() case, there is no ABI requirement to hide stale data
+ * written previously be task.
+ */
+void sve_alloc(struct task_struct *task)
+{
+ if (task->thread.sve_state) {
+ memset(task->thread.sve_state, 0, sve_state_size(current));
+ return;
+ }
+
+ /* This is a small allocation (maximum ~8KB) and Should Not Fail. */
+ task->thread.sve_state =
+ kzalloc(sve_state_size(task), GFP_KERNEL);
+
+ /*
+ * If future SVE revisions can have larger vectors though,
+ * this may cease to be true:
+ */
+ BUG_ON(!task->thread.sve_state);
+}
+
+/*
+ * Called from the put_task_struct() path, which cannot get here
+ * unless dead_task is really dead and not schedulable.
+ */
+void fpsimd_release_task(struct task_struct *dead_task)
+{
+ __sve_free(dead_task);
+}
+
+#endif /* CONFIG_ARM64_SVE */
+
+/*
+ * Trapped SVE access
+ *
+ * Storage is allocated for the full SVE state, the current FPSIMD
+ * register contents are migrated across, and TIF_SVE is set so that
+ * the SVE access trap will be disabled the next time this task
+ * reaches ret_to_user.
+ *
+ * TIF_SVE should be clear on entry: otherwise, task_fpsimd_load()
+ * would have disabled the SVE access trap for userspace during
+ * ret_to_user, making an SVE access trap impossible in that case.
+ */
+asmlinkage void do_sve_acc(unsigned int esr, struct pt_regs *regs)
+{
+ /* Even if we chose not to use SVE, the hardware could still trap: */
+ if (unlikely(!system_supports_sve()) || WARN_ON(is_compat_task())) {
+ force_signal_inject(SIGILL, ILL_ILLOPC, regs, 0);
+ return;
+ }
+
+ sve_alloc(current);
+
+ local_bh_disable();
+
+ task_fpsimd_save();
+ fpsimd_to_sve(current);
+
+ /* Force ret_to_user to reload the registers: */
+ fpsimd_flush_task_state(current);
+ set_thread_flag(TIF_FOREIGN_FPSTATE);
+
+ if (test_and_set_thread_flag(TIF_SVE))
+ WARN_ON(1); /* SVE access shouldn't have trapped */
+
+ local_bh_enable();
+}
+
+/*
* Trapped FP/ASIMD access.
*/
asmlinkage void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs)
@@ -145,8 +428,8 @@ void fpsimd_thread_switch(struct task_struct *next)
* the registers is in fact the most recent userland FPSIMD state of
* 'current'.
*/
- if (current->mm && !test_thread_flag(TIF_FOREIGN_FPSTATE))
- fpsimd_save_state(¤t->thread.fpsimd_state);
+ if (current->mm)
+ task_fpsimd_save();
if (next->mm) {
/*
@@ -168,6 +451,8 @@ void fpsimd_thread_switch(struct task_struct *next)
void fpsimd_flush_thread(void)
{
+ int vl;
+
if (!system_supports_fpsimd())
return;
@@ -175,6 +460,30 @@ void fpsimd_flush_thread(void)
memset(¤t->thread.fpsimd_state, 0, sizeof(struct fpsimd_state));
fpsimd_flush_task_state(current);
+
+ if (system_supports_sve()) {
+ clear_thread_flag(TIF_SVE);
+ sve_free(current);
+
+ /*
+ * Reset the task vector length as required.
+ * This is where we ensure that all user tasks have a valid
+ * vector length configured: no kernel task can become a user
+ * task without an exec and hence a call to this function.
+ * If a bug causes this to go wrong, we make some noise and
+ * try to fudge thread.sve_vl to a safe value here.
+ */
+ vl = current->thread.sve_vl;
+
+ if (vl == 0)
+ vl = SVE_VL_MIN;
+
+ if (WARN_ON(!sve_vl_valid(vl)))
+ vl = SVE_VL_MIN;
+
+ current->thread.sve_vl = vl;
+ }
+
set_thread_flag(TIF_FOREIGN_FPSTATE);
local_bh_enable();
@@ -183,6 +492,9 @@ void fpsimd_flush_thread(void)
/*
* Save the userland FPSIMD state of 'current' to memory, but only if the state
* currently held in the registers does in fact belong to 'current'
+ *
+ * Currently, SVE tasks can't exist, so just WARN in that case.
+ * Subsequent patches will add full SVE support here.
*/
void fpsimd_preserve_current_state(void)
{
@@ -194,6 +506,8 @@ void fpsimd_preserve_current_state(void)
if (!test_thread_flag(TIF_FOREIGN_FPSTATE))
fpsimd_save_state(¤t->thread.fpsimd_state);
+ WARN_ON_ONCE(test_and_clear_thread_flag(TIF_SVE));
+
local_bh_enable();
}
@@ -212,7 +526,7 @@ void fpsimd_restore_current_state(void)
if (test_and_clear_thread_flag(TIF_FOREIGN_FPSTATE)) {
struct fpsimd_state *st = ¤t->thread.fpsimd_state;
- fpsimd_load_state(st);
+ task_fpsimd_load();
__this_cpu_write(fpsimd_last_state, st);
st->cpu = smp_processor_id();
}
@@ -381,8 +695,8 @@ static int fpsimd_cpu_pm_notifier(struct notifier_block *self,
{
switch (cmd) {
case CPU_PM_ENTER:
- if (current->mm && !test_thread_flag(TIF_FOREIGN_FPSTATE))
- fpsimd_save_state(¤t->thread.fpsimd_state);
+ if (current->mm)
+ task_fpsimd_save();
this_cpu_write(fpsimd_last_state, NULL);
break;
case CPU_PM_EXIT:
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index c15ec41..b2adcce 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -49,6 +49,7 @@
#include <linux/notifier.h>
#include <trace/events/power.h>
#include <linux/percpu.h>
+#include <linux/thread_info.h>
#include <asm/alternative.h>
#include <asm/compat.h>
@@ -273,11 +274,27 @@ void release_thread(struct task_struct *dead_task)
{
}
+void arch_release_task_struct(struct task_struct *tsk)
+{
+ fpsimd_release_task(tsk);
+}
+
+/*
+ * src and dst may temporarily have aliased sve_state after task_struct
+ * is copied. We cannot fix this properly here, because src may have
+ * live SVE state and dst's thread_info may not exist yet, so tweaking
+ * either src's or dst's TIF_SVE is not safe.
+ *
+ * The unaliasing is done in copy_thread() instead. This works because
+ * dst is not schedulable or traceable until both of these functions
+ * have been called.
+ */
int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
{
if (current->mm)
fpsimd_preserve_current_state();
*dst = *src;
+
return 0;
}
@@ -290,6 +307,13 @@ int copy_thread(unsigned long clone_flags, unsigned long stack_start,
memset(&p->thread.cpu_context, 0, sizeof(struct cpu_context));
+ /*
+ * Unalias p->thread.sve_state (if any) from the parent task
+ * and disable discard SVE state for p:
+ */
+ clear_tsk_thread_flag(p, TIF_SVE);
+ p->thread.sve_state = NULL;
+
if (likely(!(p->flags & PF_KTHREAD))) {
*childregs = *current_pt_regs();
childregs->regs[0] = 0;
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index 18c0290..9d3c7f0 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -310,8 +310,8 @@ static int call_undef_hook(struct pt_regs *regs)
return fn ? fn(regs, instr) : 1;
}
-static void force_signal_inject(int signal, int code, struct pt_regs *regs,
- unsigned long address)
+void force_signal_inject(int signal, int code, struct pt_regs *regs,
+ unsigned long address)
{
siginfo_t info;
void __user *pc = (void __user *)instruction_pointer(regs);
@@ -325,7 +325,7 @@ static void force_signal_inject(int signal, int code, struct pt_regs *regs,
desc = "illegal memory access";
break;
default:
- desc = "bad mode";
+ desc = "unknown or unrecoverable error";
break;
}
--
2.1.4
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 13/30] arm64/sve: Core task context handling
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
This patch adds the core support for switching and managing the SVE
architectural state of user tasks.
Calls to the existing FPSIMD low-level save/restore functions are
factored out as new functions task_fpsimd_{save,load}(), since SVE
now dynamically may or may not need to be handled at these points
depending on the kernel configuration, hardware features discovered
at boot, and the runtime state of the task. To make these
decisions as fast as possible, const cpucaps are used where
feasible, via the system_supports_sve() helper.
The SVE registers are only tracked for threads that have explicitly
used SVE, indicated by the new thread flag TIF_SVE. Otherwise, the
FPSIMD view of the architectural state is stored in
thread.fpsimd_state as usual.
When in use, the SVE registers are not stored directly in
thread_struct due to their potentially large and variable size.
Because the task_struct slab allocator must be configured very
early during kernel boot, it is also tricky to configure it
correctly to match the maximum vector length provided by the
hardware, since this depends on examining secondary CPUs as well as
the primary. Instead, a pointer sve_state in thread_struct points
to a dynamically allocated buffer containing the SVE register data,
and code is added to allocate and free this buffer at appropriate
times.
TIF_SVE is set when taking an SVE access trap from userspace, if
suitable hardware support has been detected. This enables SVE for
the thread: a subsequent return to userspace will disable the trap
accordingly. If such a trap is taken without sufficient system-
wide hardware support, SIGILL is sent to the thread instead as if
an undefined instruction had been executed: this may happen if
userspace tries to use SVE in a system where not all CPUs support
it for example.
The kernel will clear TIF_SVE and disable SVE for the thread
whenever an explicit syscall is made by userspace. For backwards
compatibility reasons and conformance with the spirit of the base
AArch64 procedure call standard, the subset of the SVE register
state that aliases the FPSIMD registers is still preserved across a
syscall even if this happens. The remainder of the SVE register
state logically becomes zero at syscall entry, though the actual
zeroing work is currently deferred until the thread next tries to
use SVE, causing another trap to the kernel. This implementation
is suboptimal: in the future, the fastpath case may be optimised
to zero the registers in-place and leave SVE enabled for the task,
where beneficial.
TIF_SVE is also cleared in the following slowpath cases, which are
taken as reasonable hints that the task may no longer use SVE:
* exec
* fork and clone
Code is added to sync data between thread.fpsimd_state and
thread.sve_state whenever enabling/disabling SVE, in a manner
consistent with the SVE architectural programmer's model.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Alex Bennée <alex.bennee@linaro.org>
---
Kept Catalin's Reviewed-by, since this is a trivial change.
Changes since v4
----------------
Miscellaneous:
* Mark do_sve_acc() as asmlinkage.
(Semantic correctness only; no functional impact.)
---
arch/arm64/include/asm/fpsimd.h | 16 ++
arch/arm64/include/asm/processor.h | 2 +
arch/arm64/include/asm/thread_info.h | 4 +
arch/arm64/include/asm/traps.h | 2 +
arch/arm64/kernel/entry.S | 39 ++++-
arch/arm64/kernel/fpsimd.c | 324 ++++++++++++++++++++++++++++++++++-
arch/arm64/kernel/process.c | 24 +++
arch/arm64/kernel/traps.c | 6 +-
8 files changed, 406 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index 026a7c7..5655fe1 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -20,6 +20,8 @@
#ifndef __ASSEMBLY__
+#include <linux/stddef.h>
+
/*
* FP/SIMD storage area has:
* - FPSR and FPCR
@@ -72,6 +74,20 @@ extern void sve_load_state(void const *state, u32 const *pfpsr,
unsigned long vq_minus_1);
extern unsigned int sve_get_vl(void);
+#ifdef CONFIG_ARM64_SVE
+
+extern size_t sve_state_size(struct task_struct const *task);
+
+extern void sve_alloc(struct task_struct *task);
+extern void fpsimd_release_task(struct task_struct *task);
+
+#else /* ! CONFIG_ARM64_SVE */
+
+static inline void sve_alloc(struct task_struct *task) { }
+static inline void fpsimd_release_task(struct task_struct *task) { }
+
+#endif /* ! CONFIG_ARM64_SVE */
+
/* For use by EFI runtime services calls only */
extern void __efi_fpsimd_begin(void);
extern void __efi_fpsimd_end(void);
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index 7dddca2..e2f575d 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -105,6 +105,8 @@ struct thread_struct {
unsigned long tp2_value;
#endif
struct fpsimd_state fpsimd_state;
+ void *sve_state; /* SVE registers, if any */
+ unsigned int sve_vl; /* SVE vector length */
unsigned long fault_address; /* fault info */
unsigned long fault_code; /* ESR_EL1 value */
struct debug_info debug; /* debugging */
diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
index ddded64..92b7b48 100644
--- a/arch/arm64/include/asm/thread_info.h
+++ b/arch/arm64/include/asm/thread_info.h
@@ -63,6 +63,8 @@ struct thread_info {
void arch_setup_new_exec(void);
#define arch_setup_new_exec arch_setup_new_exec
+void arch_release_task_struct(struct task_struct *tsk);
+
#endif
/*
@@ -92,6 +94,7 @@ void arch_setup_new_exec(void);
#define TIF_RESTORE_SIGMASK 20
#define TIF_SINGLESTEP 21
#define TIF_32BIT 22 /* 32bit process */
+#define TIF_SVE 23 /* Scalable Vector Extension in use */
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
@@ -105,6 +108,7 @@ void arch_setup_new_exec(void);
#define _TIF_UPROBE (1 << TIF_UPROBE)
#define _TIF_FSCHECK (1 << TIF_FSCHECK)
#define _TIF_32BIT (1 << TIF_32BIT)
+#define _TIF_SVE (1 << TIF_SVE)
#define _TIF_WORK_MASK (_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
_TIF_NOTIFY_RESUME | _TIF_FOREIGN_FPSTATE | \
diff --git a/arch/arm64/include/asm/traps.h b/arch/arm64/include/asm/traps.h
index 45e3da3..1696f9d 100644
--- a/arch/arm64/include/asm/traps.h
+++ b/arch/arm64/include/asm/traps.h
@@ -34,6 +34,8 @@ struct undef_hook {
void register_undef_hook(struct undef_hook *hook);
void unregister_undef_hook(struct undef_hook *hook);
+void force_signal_inject(int signal, int code, struct pt_regs *regs,
+ unsigned long address);
void arm64_notify_segfault(struct pt_regs *regs, unsigned long addr);
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index f5e851e..56e848f 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -607,6 +607,8 @@ el0_sync:
b.eq el0_ia
cmp x24, #ESR_ELx_EC_FP_ASIMD // FP/ASIMD access
b.eq el0_fpsimd_acc
+ cmp x24, #ESR_ELx_EC_SVE // SVE access
+ b.eq el0_sve_acc
cmp x24, #ESR_ELx_EC_FP_EXC64 // FP/ASIMD exception
b.eq el0_fpsimd_exc
cmp x24, #ESR_ELx_EC_SYS64 // configurable trap
@@ -658,6 +660,7 @@ el0_svc_compat:
/*
* AArch32 syscall handling
*/
+ ldr x16, [tsk, #TSK_TI_FLAGS] // load thread flags
adrp stbl, compat_sys_call_table // load compat syscall table pointer
mov wscno, w7 // syscall number in w7 (r7)
mov wsc_nr, #__NR_compat_syscalls
@@ -705,9 +708,19 @@ el0_fpsimd_acc:
mov x1, sp
bl do_fpsimd_acc
b ret_to_user
+el0_sve_acc:
+ /*
+ * Scalable Vector Extension access
+ */
+ enable_dbg_and_irq
+ ct_user_exit
+ mov x0, x25
+ mov x1, sp
+ bl do_sve_acc
+ b ret_to_user
el0_fpsimd_exc:
/*
- * Floating Point or Advanced SIMD exception
+ * Floating Point, Advanced SIMD or SVE exception
*/
enable_dbg
ct_user_exit
@@ -835,16 +848,36 @@ ENDPROC(ret_to_user)
*/
.align 6
el0_svc:
+ ldr x16, [tsk, #TSK_TI_FLAGS] // load thread flags
adrp stbl, sys_call_table // load syscall table pointer
mov wscno, w8 // syscall number in w8
mov wsc_nr, #__NR_syscalls
+
+#ifndef CONFIG_ARM64_SVE
+ b el0_svc_naked
+#else
+ tbz x16, #TIF_SVE, el0_svc_naked // Skip unless TIF_SVE set:
+ bic x16, x16, #_TIF_SVE // discard SVE state
+ str x16, [tsk, #TSK_TI_FLAGS]
+
+ /*
+ * task_fpsimd_load() won't be called to update CPACR_EL1 in
+ * ret_to_user unless TIF_FOREIGN_FPSTATE is still set, which only
+ * happens if a context switch or kernel_neon_begin() or context
+ * modification (sigreturn, ptrace) intervenes.
+ * So, ensure that CPACR_EL1 is already correct for the fast-path case:
+ */
+ mrs x9, cpacr_el1
+ bic x9, x9, #CPACR_EL1_ZEN_EL0EN // disable SVE for el0
+ msr cpacr_el1, x9 // synchronised by eret to el0
+#endif /* CONFIG_ARM64_SVE */
+
el0_svc_naked: // compat entry point
stp x0, xscno, [sp, #S_ORIG_X0] // save the original x0 and syscall number
enable_dbg_and_irq
ct_user_exit 1
- ldr x16, [tsk, #TSK_TI_FLAGS] // check for syscall hooks
- tst x16, #_TIF_SYSCALL_WORK
+ tst x16, #_TIF_SYSCALL_WORK // check for syscall hooks
b.ne __sys_trace
cmp wscno, wsc_nr // check upper syscall limit
b.hs ni_sys
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 2baba0d..787f5d3 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -18,19 +18,27 @@
*/
#include <linux/bottom_half.h>
+#include <linux/bug.h>
+#include <linux/compat.h>
#include <linux/cpu.h>
#include <linux/cpu_pm.h>
#include <linux/kernel.h>
#include <linux/linkage.h>
+#include <linux/irqflags.h>
#include <linux/init.h>
#include <linux/percpu.h>
#include <linux/preempt.h>
+#include <linux/ptrace.h>
#include <linux/sched/signal.h>
#include <linux/signal.h>
+#include <linux/slab.h>
#include <asm/fpsimd.h>
#include <asm/cputype.h>
#include <asm/simd.h>
+#include <asm/sigcontext.h>
+#include <asm/sysreg.h>
+#include <asm/traps.h>
#define FPEXC_IOF (1 << 0)
#define FPEXC_DZF (1 << 1)
@@ -40,6 +48,8 @@
#define FPEXC_IDF (1 << 7)
/*
+ * (Note: in this discussion, statements about FPSIMD apply equally to SVE.)
+ *
* In order to reduce the number of times the FPSIMD state is needlessly saved
* and restored, we need to keep track of two things:
* (a) for each task, we need to remember which CPU was the last one to have
@@ -101,6 +111,279 @@
static DEFINE_PER_CPU(struct fpsimd_state *, fpsimd_last_state);
/*
+ * Call __sve_free() directly only if you know task can't be scheduled
+ * or preempted.
+ */
+static void __sve_free(struct task_struct *task)
+{
+ kfree(task->thread.sve_state);
+ task->thread.sve_state = NULL;
+}
+
+static void sve_free(struct task_struct *task)
+{
+ WARN_ON(test_tsk_thread_flag(task, TIF_SVE));
+
+ __sve_free(task);
+}
+
+
+/* Offset of FFR in the SVE register dump */
+static size_t sve_ffr_offset(int vl)
+{
+ return SVE_SIG_FFR_OFFSET(sve_vq_from_vl(vl)) - SVE_SIG_REGS_OFFSET;
+}
+
+static void *sve_pffr(struct task_struct *task)
+{
+ return (char *)task->thread.sve_state +
+ sve_ffr_offset(task->thread.sve_vl);
+}
+
+static void change_cpacr(u64 val, u64 mask)
+{
+ u64 cpacr = read_sysreg(CPACR_EL1);
+ u64 new = (cpacr & ~mask) | val;
+
+ if (new != cpacr)
+ write_sysreg(new, CPACR_EL1);
+}
+
+static void sve_user_disable(void)
+{
+ change_cpacr(0, CPACR_EL1_ZEN_EL0EN);
+}
+
+static void sve_user_enable(void)
+{
+ change_cpacr(CPACR_EL1_ZEN_EL0EN, CPACR_EL1_ZEN_EL0EN);
+}
+
+/*
+ * TIF_SVE controls whether a task can use SVE without trapping while
+ * in userspace, and also the way a task's FPSIMD/SVE state is stored
+ * in thread_struct.
+ *
+ * The kernel uses this flag to track whether a user task is actively
+ * using SVE, and therefore whether full SVE register state needs to
+ * be tracked. If not, the cheaper FPSIMD context handling code can
+ * be used instead of the more costly SVE equivalents.
+ *
+ * * TIF_SVE set:
+ *
+ * The task can execute SVE instructions while in userspace without
+ * trapping to the kernel.
+ *
+ * When stored, Z0-Z31 (incorporating Vn in bits[127:0] or the
+ * corresponding Zn), P0-P15 and FFR are encoded in in
+ * task->thread.sve_state, formatted appropriately for vector
+ * length task->thread.sve_vl.
+ *
+ * task->thread.sve_state must point to a valid buffer at least
+ * sve_state_size(task) bytes in size.
+ *
+ * During any syscall, the kernel may optionally clear TIF_SVE and
+ * discard the vector state except for the FPSIMD subset.
+ *
+ * * TIF_SVE clear:
+ *
+ * An attempt by the user task to execute an SVE instruction causes
+ * do_sve_acc() to be called, which does some preparation and then
+ * sets TIF_SVE.
+ *
+ * When stored, FPSIMD registers V0-V31 are encoded in
+ * task->fpsimd_state; bits [max : 128] for each of Z0-Z31 are
+ * logically zero but not stored anywhere; P0-P15 and FFR are not
+ * stored and have unspecified values from userspace's point of
+ * view. For hygiene purposes, the kernel zeroes them on next use,
+ * but userspace is discouraged from relying on this.
+ *
+ * task->thread.sve_state does not need to be non-NULL, valid or any
+ * particular size: it must not be dereferenced.
+ *
+ * * FPSR and FPCR are always stored in task->fpsimd_state irrespctive of
+ * whether TIF_SVE is clear or set, since these are not vector length
+ * dependent.
+ */
+
+/*
+ * Update current's FPSIMD/SVE registers from thread_struct.
+ *
+ * This function should be called only when the FPSIMD/SVE state in
+ * thread_struct is known to be up to date, when preparing to enter
+ * userspace.
+ *
+ * Softirqs (and preemption) must be disabled.
+ */
+static void task_fpsimd_load(void)
+{
+ WARN_ON(!in_softirq() && !irqs_disabled());
+
+ if (system_supports_sve() && test_thread_flag(TIF_SVE))
+ sve_load_state(sve_pffr(current),
+ ¤t->thread.fpsimd_state.fpsr,
+ sve_vq_from_vl(current->thread.sve_vl) - 1);
+ else
+ fpsimd_load_state(¤t->thread.fpsimd_state);
+
+ if (system_supports_sve()) {
+ /* Toggle SVE trapping for userspace if needed */
+ if (test_thread_flag(TIF_SVE))
+ sve_user_enable();
+ else
+ sve_user_disable();
+
+ /* Serialised by exception return to user */
+ }
+}
+
+/*
+ * Ensure current's FPSIMD/SVE storage in thread_struct is up to date
+ * with respect to the CPU registers.
+ *
+ * Softirqs (and preemption) must be disabled.
+ */
+static void task_fpsimd_save(void)
+{
+ WARN_ON(!in_softirq() && !irqs_disabled());
+
+ if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
+ if (system_supports_sve() && test_thread_flag(TIF_SVE)) {
+ if (WARN_ON(sve_get_vl() != current->thread.sve_vl)) {
+ /*
+ * Can't save the user regs, so current would
+ * re-enter user with corrupt state.
+ * There's no way to recover, so kill it:
+ */
+ force_signal_inject(
+ SIGKILL, 0, current_pt_regs(), 0);
+ return;
+ }
+
+ sve_save_state(sve_pffr(current),
+ ¤t->thread.fpsimd_state.fpsr);
+ } else
+ fpsimd_save_state(¤t->thread.fpsimd_state);
+ }
+}
+
+#define ZREG(sve_state, vq, n) ((char *)(sve_state) + \
+ (SVE_SIG_ZREG_OFFSET(vq, n) - SVE_SIG_REGS_OFFSET))
+
+/*
+ * Transfer the FPSIMD state in task->thread.fpsimd_state to
+ * task->thread.sve_state.
+ *
+ * Task can be a non-runnable task, or current. In the latter case,
+ * softirqs (and preemption) must be disabled.
+ * task->thread.sve_state must point to at least sve_state_size(task)
+ * bytes of allocated kernel memory.
+ * task->thread.fpsimd_state must be up to date before calling this function.
+ */
+static void fpsimd_to_sve(struct task_struct *task)
+{
+ unsigned int vq;
+ void *sst = task->thread.sve_state;
+ struct fpsimd_state const *fst = &task->thread.fpsimd_state;
+ unsigned int i;
+
+ if (!system_supports_sve())
+ return;
+
+ vq = sve_vq_from_vl(task->thread.sve_vl);
+ for (i = 0; i < 32; ++i)
+ memcpy(ZREG(sst, vq, i), &fst->vregs[i],
+ sizeof(fst->vregs[i]));
+}
+
+#ifdef CONFIG_ARM64_SVE
+
+/*
+ * Return how many bytes of memory are required to store the full SVE
+ * state for task, given task's currently configured vector length.
+ */
+size_t sve_state_size(struct task_struct const *task)
+{
+ return SVE_SIG_REGS_SIZE(sve_vq_from_vl(task->thread.sve_vl));
+}
+
+/*
+ * Ensure that task->thread.sve_state is allocated and sufficiently large.
+ *
+ * This function should be used only in preparation for replacing
+ * task->thread.sve_state with new data. The memory is always zeroed
+ * here to prevent stale data from showing through: this is done in
+ * the interest of testability and predictability: except in the
+ * do_sve_acc() case, there is no ABI requirement to hide stale data
+ * written previously be task.
+ */
+void sve_alloc(struct task_struct *task)
+{
+ if (task->thread.sve_state) {
+ memset(task->thread.sve_state, 0, sve_state_size(current));
+ return;
+ }
+
+ /* This is a small allocation (maximum ~8KB) and Should Not Fail. */
+ task->thread.sve_state =
+ kzalloc(sve_state_size(task), GFP_KERNEL);
+
+ /*
+ * If future SVE revisions can have larger vectors though,
+ * this may cease to be true:
+ */
+ BUG_ON(!task->thread.sve_state);
+}
+
+/*
+ * Called from the put_task_struct() path, which cannot get here
+ * unless dead_task is really dead and not schedulable.
+ */
+void fpsimd_release_task(struct task_struct *dead_task)
+{
+ __sve_free(dead_task);
+}
+
+#endif /* CONFIG_ARM64_SVE */
+
+/*
+ * Trapped SVE access
+ *
+ * Storage is allocated for the full SVE state, the current FPSIMD
+ * register contents are migrated across, and TIF_SVE is set so that
+ * the SVE access trap will be disabled the next time this task
+ * reaches ret_to_user.
+ *
+ * TIF_SVE should be clear on entry: otherwise, task_fpsimd_load()
+ * would have disabled the SVE access trap for userspace during
+ * ret_to_user, making an SVE access trap impossible in that case.
+ */
+asmlinkage void do_sve_acc(unsigned int esr, struct pt_regs *regs)
+{
+ /* Even if we chose not to use SVE, the hardware could still trap: */
+ if (unlikely(!system_supports_sve()) || WARN_ON(is_compat_task())) {
+ force_signal_inject(SIGILL, ILL_ILLOPC, regs, 0);
+ return;
+ }
+
+ sve_alloc(current);
+
+ local_bh_disable();
+
+ task_fpsimd_save();
+ fpsimd_to_sve(current);
+
+ /* Force ret_to_user to reload the registers: */
+ fpsimd_flush_task_state(current);
+ set_thread_flag(TIF_FOREIGN_FPSTATE);
+
+ if (test_and_set_thread_flag(TIF_SVE))
+ WARN_ON(1); /* SVE access shouldn't have trapped */
+
+ local_bh_enable();
+}
+
+/*
* Trapped FP/ASIMD access.
*/
asmlinkage void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs)
@@ -145,8 +428,8 @@ void fpsimd_thread_switch(struct task_struct *next)
* the registers is in fact the most recent userland FPSIMD state of
* 'current'.
*/
- if (current->mm && !test_thread_flag(TIF_FOREIGN_FPSTATE))
- fpsimd_save_state(¤t->thread.fpsimd_state);
+ if (current->mm)
+ task_fpsimd_save();
if (next->mm) {
/*
@@ -168,6 +451,8 @@ void fpsimd_thread_switch(struct task_struct *next)
void fpsimd_flush_thread(void)
{
+ int vl;
+
if (!system_supports_fpsimd())
return;
@@ -175,6 +460,30 @@ void fpsimd_flush_thread(void)
memset(¤t->thread.fpsimd_state, 0, sizeof(struct fpsimd_state));
fpsimd_flush_task_state(current);
+
+ if (system_supports_sve()) {
+ clear_thread_flag(TIF_SVE);
+ sve_free(current);
+
+ /*
+ * Reset the task vector length as required.
+ * This is where we ensure that all user tasks have a valid
+ * vector length configured: no kernel task can become a user
+ * task without an exec and hence a call to this function.
+ * If a bug causes this to go wrong, we make some noise and
+ * try to fudge thread.sve_vl to a safe value here.
+ */
+ vl = current->thread.sve_vl;
+
+ if (vl == 0)
+ vl = SVE_VL_MIN;
+
+ if (WARN_ON(!sve_vl_valid(vl)))
+ vl = SVE_VL_MIN;
+
+ current->thread.sve_vl = vl;
+ }
+
set_thread_flag(TIF_FOREIGN_FPSTATE);
local_bh_enable();
@@ -183,6 +492,9 @@ void fpsimd_flush_thread(void)
/*
* Save the userland FPSIMD state of 'current' to memory, but only if the state
* currently held in the registers does in fact belong to 'current'
+ *
+ * Currently, SVE tasks can't exist, so just WARN in that case.
+ * Subsequent patches will add full SVE support here.
*/
void fpsimd_preserve_current_state(void)
{
@@ -194,6 +506,8 @@ void fpsimd_preserve_current_state(void)
if (!test_thread_flag(TIF_FOREIGN_FPSTATE))
fpsimd_save_state(¤t->thread.fpsimd_state);
+ WARN_ON_ONCE(test_and_clear_thread_flag(TIF_SVE));
+
local_bh_enable();
}
@@ -212,7 +526,7 @@ void fpsimd_restore_current_state(void)
if (test_and_clear_thread_flag(TIF_FOREIGN_FPSTATE)) {
struct fpsimd_state *st = ¤t->thread.fpsimd_state;
- fpsimd_load_state(st);
+ task_fpsimd_load();
__this_cpu_write(fpsimd_last_state, st);
st->cpu = smp_processor_id();
}
@@ -381,8 +695,8 @@ static int fpsimd_cpu_pm_notifier(struct notifier_block *self,
{
switch (cmd) {
case CPU_PM_ENTER:
- if (current->mm && !test_thread_flag(TIF_FOREIGN_FPSTATE))
- fpsimd_save_state(¤t->thread.fpsimd_state);
+ if (current->mm)
+ task_fpsimd_save();
this_cpu_write(fpsimd_last_state, NULL);
break;
case CPU_PM_EXIT:
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index c15ec41..b2adcce 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -49,6 +49,7 @@
#include <linux/notifier.h>
#include <trace/events/power.h>
#include <linux/percpu.h>
+#include <linux/thread_info.h>
#include <asm/alternative.h>
#include <asm/compat.h>
@@ -273,11 +274,27 @@ void release_thread(struct task_struct *dead_task)
{
}
+void arch_release_task_struct(struct task_struct *tsk)
+{
+ fpsimd_release_task(tsk);
+}
+
+/*
+ * src and dst may temporarily have aliased sve_state after task_struct
+ * is copied. We cannot fix this properly here, because src may have
+ * live SVE state and dst's thread_info may not exist yet, so tweaking
+ * either src's or dst's TIF_SVE is not safe.
+ *
+ * The unaliasing is done in copy_thread() instead. This works because
+ * dst is not schedulable or traceable until both of these functions
+ * have been called.
+ */
int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
{
if (current->mm)
fpsimd_preserve_current_state();
*dst = *src;
+
return 0;
}
@@ -290,6 +307,13 @@ int copy_thread(unsigned long clone_flags, unsigned long stack_start,
memset(&p->thread.cpu_context, 0, sizeof(struct cpu_context));
+ /*
+ * Unalias p->thread.sve_state (if any) from the parent task
+ * and disable discard SVE state for p:
+ */
+ clear_tsk_thread_flag(p, TIF_SVE);
+ p->thread.sve_state = NULL;
+
if (likely(!(p->flags & PF_KTHREAD))) {
*childregs = *current_pt_regs();
childregs->regs[0] = 0;
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index 18c0290..9d3c7f0 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -310,8 +310,8 @@ static int call_undef_hook(struct pt_regs *regs)
return fn ? fn(regs, instr) : 1;
}
-static void force_signal_inject(int signal, int code, struct pt_regs *regs,
- unsigned long address)
+void force_signal_inject(int signal, int code, struct pt_regs *regs,
+ unsigned long address)
{
siginfo_t info;
void __user *pc = (void __user *)instruction_pointer(regs);
@@ -325,7 +325,7 @@ static void force_signal_inject(int signal, int code, struct pt_regs *regs,
desc = "illegal memory access";
break;
default:
- desc = "bad mode";
+ desc = "unknown or unrecoverable error";
break;
}
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 13/30] arm64/sve: Core task context handling
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds the core support for switching and managing the SVE
architectural state of user tasks.
Calls to the existing FPSIMD low-level save/restore functions are
factored out as new functions task_fpsimd_{save,load}(), since SVE
now dynamically may or may not need to be handled at these points
depending on the kernel configuration, hardware features discovered
at boot, and the runtime state of the task. To make these
decisions as fast as possible, const cpucaps are used where
feasible, via the system_supports_sve() helper.
The SVE registers are only tracked for threads that have explicitly
used SVE, indicated by the new thread flag TIF_SVE. Otherwise, the
FPSIMD view of the architectural state is stored in
thread.fpsimd_state as usual.
When in use, the SVE registers are not stored directly in
thread_struct due to their potentially large and variable size.
Because the task_struct slab allocator must be configured very
early during kernel boot, it is also tricky to configure it
correctly to match the maximum vector length provided by the
hardware, since this depends on examining secondary CPUs as well as
the primary. Instead, a pointer sve_state in thread_struct points
to a dynamically allocated buffer containing the SVE register data,
and code is added to allocate and free this buffer at appropriate
times.
TIF_SVE is set when taking an SVE access trap from userspace, if
suitable hardware support has been detected. This enables SVE for
the thread: a subsequent return to userspace will disable the trap
accordingly. If such a trap is taken without sufficient system-
wide hardware support, SIGILL is sent to the thread instead as if
an undefined instruction had been executed: this may happen if
userspace tries to use SVE in a system where not all CPUs support
it for example.
The kernel will clear TIF_SVE and disable SVE for the thread
whenever an explicit syscall is made by userspace. For backwards
compatibility reasons and conformance with the spirit of the base
AArch64 procedure call standard, the subset of the SVE register
state that aliases the FPSIMD registers is still preserved across a
syscall even if this happens. The remainder of the SVE register
state logically becomes zero at syscall entry, though the actual
zeroing work is currently deferred until the thread next tries to
use SVE, causing another trap to the kernel. This implementation
is suboptimal: in the future, the fastpath case may be optimised
to zero the registers in-place and leave SVE enabled for the task,
where beneficial.
TIF_SVE is also cleared in the following slowpath cases, which are
taken as reasonable hints that the task may no longer use SVE:
* exec
* fork and clone
Code is added to sync data between thread.fpsimd_state and
thread.sve_state whenever enabling/disabling SVE, in a manner
consistent with the SVE architectural programmer's model.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Alex Benn?e <alex.bennee@linaro.org>
---
Kept Catalin's Reviewed-by, since this is a trivial change.
Changes since v4
----------------
Miscellaneous:
* Mark do_sve_acc() as asmlinkage.
(Semantic correctness only; no functional impact.)
---
arch/arm64/include/asm/fpsimd.h | 16 ++
arch/arm64/include/asm/processor.h | 2 +
arch/arm64/include/asm/thread_info.h | 4 +
arch/arm64/include/asm/traps.h | 2 +
arch/arm64/kernel/entry.S | 39 ++++-
arch/arm64/kernel/fpsimd.c | 324 ++++++++++++++++++++++++++++++++++-
arch/arm64/kernel/process.c | 24 +++
arch/arm64/kernel/traps.c | 6 +-
8 files changed, 406 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index 026a7c7..5655fe1 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -20,6 +20,8 @@
#ifndef __ASSEMBLY__
+#include <linux/stddef.h>
+
/*
* FP/SIMD storage area has:
* - FPSR and FPCR
@@ -72,6 +74,20 @@ extern void sve_load_state(void const *state, u32 const *pfpsr,
unsigned long vq_minus_1);
extern unsigned int sve_get_vl(void);
+#ifdef CONFIG_ARM64_SVE
+
+extern size_t sve_state_size(struct task_struct const *task);
+
+extern void sve_alloc(struct task_struct *task);
+extern void fpsimd_release_task(struct task_struct *task);
+
+#else /* ! CONFIG_ARM64_SVE */
+
+static inline void sve_alloc(struct task_struct *task) { }
+static inline void fpsimd_release_task(struct task_struct *task) { }
+
+#endif /* ! CONFIG_ARM64_SVE */
+
/* For use by EFI runtime services calls only */
extern void __efi_fpsimd_begin(void);
extern void __efi_fpsimd_end(void);
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index 7dddca2..e2f575d 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -105,6 +105,8 @@ struct thread_struct {
unsigned long tp2_value;
#endif
struct fpsimd_state fpsimd_state;
+ void *sve_state; /* SVE registers, if any */
+ unsigned int sve_vl; /* SVE vector length */
unsigned long fault_address; /* fault info */
unsigned long fault_code; /* ESR_EL1 value */
struct debug_info debug; /* debugging */
diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
index ddded64..92b7b48 100644
--- a/arch/arm64/include/asm/thread_info.h
+++ b/arch/arm64/include/asm/thread_info.h
@@ -63,6 +63,8 @@ struct thread_info {
void arch_setup_new_exec(void);
#define arch_setup_new_exec arch_setup_new_exec
+void arch_release_task_struct(struct task_struct *tsk);
+
#endif
/*
@@ -92,6 +94,7 @@ void arch_setup_new_exec(void);
#define TIF_RESTORE_SIGMASK 20
#define TIF_SINGLESTEP 21
#define TIF_32BIT 22 /* 32bit process */
+#define TIF_SVE 23 /* Scalable Vector Extension in use */
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
@@ -105,6 +108,7 @@ void arch_setup_new_exec(void);
#define _TIF_UPROBE (1 << TIF_UPROBE)
#define _TIF_FSCHECK (1 << TIF_FSCHECK)
#define _TIF_32BIT (1 << TIF_32BIT)
+#define _TIF_SVE (1 << TIF_SVE)
#define _TIF_WORK_MASK (_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
_TIF_NOTIFY_RESUME | _TIF_FOREIGN_FPSTATE | \
diff --git a/arch/arm64/include/asm/traps.h b/arch/arm64/include/asm/traps.h
index 45e3da3..1696f9d 100644
--- a/arch/arm64/include/asm/traps.h
+++ b/arch/arm64/include/asm/traps.h
@@ -34,6 +34,8 @@ struct undef_hook {
void register_undef_hook(struct undef_hook *hook);
void unregister_undef_hook(struct undef_hook *hook);
+void force_signal_inject(int signal, int code, struct pt_regs *regs,
+ unsigned long address);
void arm64_notify_segfault(struct pt_regs *regs, unsigned long addr);
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index f5e851e..56e848f 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -607,6 +607,8 @@ el0_sync:
b.eq el0_ia
cmp x24, #ESR_ELx_EC_FP_ASIMD // FP/ASIMD access
b.eq el0_fpsimd_acc
+ cmp x24, #ESR_ELx_EC_SVE // SVE access
+ b.eq el0_sve_acc
cmp x24, #ESR_ELx_EC_FP_EXC64 // FP/ASIMD exception
b.eq el0_fpsimd_exc
cmp x24, #ESR_ELx_EC_SYS64 // configurable trap
@@ -658,6 +660,7 @@ el0_svc_compat:
/*
* AArch32 syscall handling
*/
+ ldr x16, [tsk, #TSK_TI_FLAGS] // load thread flags
adrp stbl, compat_sys_call_table // load compat syscall table pointer
mov wscno, w7 // syscall number in w7 (r7)
mov wsc_nr, #__NR_compat_syscalls
@@ -705,9 +708,19 @@ el0_fpsimd_acc:
mov x1, sp
bl do_fpsimd_acc
b ret_to_user
+el0_sve_acc:
+ /*
+ * Scalable Vector Extension access
+ */
+ enable_dbg_and_irq
+ ct_user_exit
+ mov x0, x25
+ mov x1, sp
+ bl do_sve_acc
+ b ret_to_user
el0_fpsimd_exc:
/*
- * Floating Point or Advanced SIMD exception
+ * Floating Point, Advanced SIMD or SVE exception
*/
enable_dbg
ct_user_exit
@@ -835,16 +848,36 @@ ENDPROC(ret_to_user)
*/
.align 6
el0_svc:
+ ldr x16, [tsk, #TSK_TI_FLAGS] // load thread flags
adrp stbl, sys_call_table // load syscall table pointer
mov wscno, w8 // syscall number in w8
mov wsc_nr, #__NR_syscalls
+
+#ifndef CONFIG_ARM64_SVE
+ b el0_svc_naked
+#else
+ tbz x16, #TIF_SVE, el0_svc_naked // Skip unless TIF_SVE set:
+ bic x16, x16, #_TIF_SVE // discard SVE state
+ str x16, [tsk, #TSK_TI_FLAGS]
+
+ /*
+ * task_fpsimd_load() won't be called to update CPACR_EL1 in
+ * ret_to_user unless TIF_FOREIGN_FPSTATE is still set, which only
+ * happens if a context switch or kernel_neon_begin() or context
+ * modification (sigreturn, ptrace) intervenes.
+ * So, ensure that CPACR_EL1 is already correct for the fast-path case:
+ */
+ mrs x9, cpacr_el1
+ bic x9, x9, #CPACR_EL1_ZEN_EL0EN // disable SVE for el0
+ msr cpacr_el1, x9 // synchronised by eret to el0
+#endif /* CONFIG_ARM64_SVE */
+
el0_svc_naked: // compat entry point
stp x0, xscno, [sp, #S_ORIG_X0] // save the original x0 and syscall number
enable_dbg_and_irq
ct_user_exit 1
- ldr x16, [tsk, #TSK_TI_FLAGS] // check for syscall hooks
- tst x16, #_TIF_SYSCALL_WORK
+ tst x16, #_TIF_SYSCALL_WORK // check for syscall hooks
b.ne __sys_trace
cmp wscno, wsc_nr // check upper syscall limit
b.hs ni_sys
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 2baba0d..787f5d3 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -18,19 +18,27 @@
*/
#include <linux/bottom_half.h>
+#include <linux/bug.h>
+#include <linux/compat.h>
#include <linux/cpu.h>
#include <linux/cpu_pm.h>
#include <linux/kernel.h>
#include <linux/linkage.h>
+#include <linux/irqflags.h>
#include <linux/init.h>
#include <linux/percpu.h>
#include <linux/preempt.h>
+#include <linux/ptrace.h>
#include <linux/sched/signal.h>
#include <linux/signal.h>
+#include <linux/slab.h>
#include <asm/fpsimd.h>
#include <asm/cputype.h>
#include <asm/simd.h>
+#include <asm/sigcontext.h>
+#include <asm/sysreg.h>
+#include <asm/traps.h>
#define FPEXC_IOF (1 << 0)
#define FPEXC_DZF (1 << 1)
@@ -40,6 +48,8 @@
#define FPEXC_IDF (1 << 7)
/*
+ * (Note: in this discussion, statements about FPSIMD apply equally to SVE.)
+ *
* In order to reduce the number of times the FPSIMD state is needlessly saved
* and restored, we need to keep track of two things:
* (a) for each task, we need to remember which CPU was the last one to have
@@ -101,6 +111,279 @@
static DEFINE_PER_CPU(struct fpsimd_state *, fpsimd_last_state);
/*
+ * Call __sve_free() directly only if you know task can't be scheduled
+ * or preempted.
+ */
+static void __sve_free(struct task_struct *task)
+{
+ kfree(task->thread.sve_state);
+ task->thread.sve_state = NULL;
+}
+
+static void sve_free(struct task_struct *task)
+{
+ WARN_ON(test_tsk_thread_flag(task, TIF_SVE));
+
+ __sve_free(task);
+}
+
+
+/* Offset of FFR in the SVE register dump */
+static size_t sve_ffr_offset(int vl)
+{
+ return SVE_SIG_FFR_OFFSET(sve_vq_from_vl(vl)) - SVE_SIG_REGS_OFFSET;
+}
+
+static void *sve_pffr(struct task_struct *task)
+{
+ return (char *)task->thread.sve_state +
+ sve_ffr_offset(task->thread.sve_vl);
+}
+
+static void change_cpacr(u64 val, u64 mask)
+{
+ u64 cpacr = read_sysreg(CPACR_EL1);
+ u64 new = (cpacr & ~mask) | val;
+
+ if (new != cpacr)
+ write_sysreg(new, CPACR_EL1);
+}
+
+static void sve_user_disable(void)
+{
+ change_cpacr(0, CPACR_EL1_ZEN_EL0EN);
+}
+
+static void sve_user_enable(void)
+{
+ change_cpacr(CPACR_EL1_ZEN_EL0EN, CPACR_EL1_ZEN_EL0EN);
+}
+
+/*
+ * TIF_SVE controls whether a task can use SVE without trapping while
+ * in userspace, and also the way a task's FPSIMD/SVE state is stored
+ * in thread_struct.
+ *
+ * The kernel uses this flag to track whether a user task is actively
+ * using SVE, and therefore whether full SVE register state needs to
+ * be tracked. If not, the cheaper FPSIMD context handling code can
+ * be used instead of the more costly SVE equivalents.
+ *
+ * * TIF_SVE set:
+ *
+ * The task can execute SVE instructions while in userspace without
+ * trapping to the kernel.
+ *
+ * When stored, Z0-Z31 (incorporating Vn in bits[127:0] or the
+ * corresponding Zn), P0-P15 and FFR are encoded in in
+ * task->thread.sve_state, formatted appropriately for vector
+ * length task->thread.sve_vl.
+ *
+ * task->thread.sve_state must point to a valid buffer at least
+ * sve_state_size(task) bytes in size.
+ *
+ * During any syscall, the kernel may optionally clear TIF_SVE and
+ * discard the vector state except for the FPSIMD subset.
+ *
+ * * TIF_SVE clear:
+ *
+ * An attempt by the user task to execute an SVE instruction causes
+ * do_sve_acc() to be called, which does some preparation and then
+ * sets TIF_SVE.
+ *
+ * When stored, FPSIMD registers V0-V31 are encoded in
+ * task->fpsimd_state; bits [max : 128] for each of Z0-Z31 are
+ * logically zero but not stored anywhere; P0-P15 and FFR are not
+ * stored and have unspecified values from userspace's point of
+ * view. For hygiene purposes, the kernel zeroes them on next use,
+ * but userspace is discouraged from relying on this.
+ *
+ * task->thread.sve_state does not need to be non-NULL, valid or any
+ * particular size: it must not be dereferenced.
+ *
+ * * FPSR and FPCR are always stored in task->fpsimd_state irrespctive of
+ * whether TIF_SVE is clear or set, since these are not vector length
+ * dependent.
+ */
+
+/*
+ * Update current's FPSIMD/SVE registers from thread_struct.
+ *
+ * This function should be called only when the FPSIMD/SVE state in
+ * thread_struct is known to be up to date, when preparing to enter
+ * userspace.
+ *
+ * Softirqs (and preemption) must be disabled.
+ */
+static void task_fpsimd_load(void)
+{
+ WARN_ON(!in_softirq() && !irqs_disabled());
+
+ if (system_supports_sve() && test_thread_flag(TIF_SVE))
+ sve_load_state(sve_pffr(current),
+ ¤t->thread.fpsimd_state.fpsr,
+ sve_vq_from_vl(current->thread.sve_vl) - 1);
+ else
+ fpsimd_load_state(¤t->thread.fpsimd_state);
+
+ if (system_supports_sve()) {
+ /* Toggle SVE trapping for userspace if needed */
+ if (test_thread_flag(TIF_SVE))
+ sve_user_enable();
+ else
+ sve_user_disable();
+
+ /* Serialised by exception return to user */
+ }
+}
+
+/*
+ * Ensure current's FPSIMD/SVE storage in thread_struct is up to date
+ * with respect to the CPU registers.
+ *
+ * Softirqs (and preemption) must be disabled.
+ */
+static void task_fpsimd_save(void)
+{
+ WARN_ON(!in_softirq() && !irqs_disabled());
+
+ if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
+ if (system_supports_sve() && test_thread_flag(TIF_SVE)) {
+ if (WARN_ON(sve_get_vl() != current->thread.sve_vl)) {
+ /*
+ * Can't save the user regs, so current would
+ * re-enter user with corrupt state.
+ * There's no way to recover, so kill it:
+ */
+ force_signal_inject(
+ SIGKILL, 0, current_pt_regs(), 0);
+ return;
+ }
+
+ sve_save_state(sve_pffr(current),
+ ¤t->thread.fpsimd_state.fpsr);
+ } else
+ fpsimd_save_state(¤t->thread.fpsimd_state);
+ }
+}
+
+#define ZREG(sve_state, vq, n) ((char *)(sve_state) + \
+ (SVE_SIG_ZREG_OFFSET(vq, n) - SVE_SIG_REGS_OFFSET))
+
+/*
+ * Transfer the FPSIMD state in task->thread.fpsimd_state to
+ * task->thread.sve_state.
+ *
+ * Task can be a non-runnable task, or current. In the latter case,
+ * softirqs (and preemption) must be disabled.
+ * task->thread.sve_state must point to at least sve_state_size(task)
+ * bytes of allocated kernel memory.
+ * task->thread.fpsimd_state must be up to date before calling this function.
+ */
+static void fpsimd_to_sve(struct task_struct *task)
+{
+ unsigned int vq;
+ void *sst = task->thread.sve_state;
+ struct fpsimd_state const *fst = &task->thread.fpsimd_state;
+ unsigned int i;
+
+ if (!system_supports_sve())
+ return;
+
+ vq = sve_vq_from_vl(task->thread.sve_vl);
+ for (i = 0; i < 32; ++i)
+ memcpy(ZREG(sst, vq, i), &fst->vregs[i],
+ sizeof(fst->vregs[i]));
+}
+
+#ifdef CONFIG_ARM64_SVE
+
+/*
+ * Return how many bytes of memory are required to store the full SVE
+ * state for task, given task's currently configured vector length.
+ */
+size_t sve_state_size(struct task_struct const *task)
+{
+ return SVE_SIG_REGS_SIZE(sve_vq_from_vl(task->thread.sve_vl));
+}
+
+/*
+ * Ensure that task->thread.sve_state is allocated and sufficiently large.
+ *
+ * This function should be used only in preparation for replacing
+ * task->thread.sve_state with new data. The memory is always zeroed
+ * here to prevent stale data from showing through: this is done in
+ * the interest of testability and predictability: except in the
+ * do_sve_acc() case, there is no ABI requirement to hide stale data
+ * written previously be task.
+ */
+void sve_alloc(struct task_struct *task)
+{
+ if (task->thread.sve_state) {
+ memset(task->thread.sve_state, 0, sve_state_size(current));
+ return;
+ }
+
+ /* This is a small allocation (maximum ~8KB) and Should Not Fail. */
+ task->thread.sve_state =
+ kzalloc(sve_state_size(task), GFP_KERNEL);
+
+ /*
+ * If future SVE revisions can have larger vectors though,
+ * this may cease to be true:
+ */
+ BUG_ON(!task->thread.sve_state);
+}
+
+/*
+ * Called from the put_task_struct() path, which cannot get here
+ * unless dead_task is really dead and not schedulable.
+ */
+void fpsimd_release_task(struct task_struct *dead_task)
+{
+ __sve_free(dead_task);
+}
+
+#endif /* CONFIG_ARM64_SVE */
+
+/*
+ * Trapped SVE access
+ *
+ * Storage is allocated for the full SVE state, the current FPSIMD
+ * register contents are migrated across, and TIF_SVE is set so that
+ * the SVE access trap will be disabled the next time this task
+ * reaches ret_to_user.
+ *
+ * TIF_SVE should be clear on entry: otherwise, task_fpsimd_load()
+ * would have disabled the SVE access trap for userspace during
+ * ret_to_user, making an SVE access trap impossible in that case.
+ */
+asmlinkage void do_sve_acc(unsigned int esr, struct pt_regs *regs)
+{
+ /* Even if we chose not to use SVE, the hardware could still trap: */
+ if (unlikely(!system_supports_sve()) || WARN_ON(is_compat_task())) {
+ force_signal_inject(SIGILL, ILL_ILLOPC, regs, 0);
+ return;
+ }
+
+ sve_alloc(current);
+
+ local_bh_disable();
+
+ task_fpsimd_save();
+ fpsimd_to_sve(current);
+
+ /* Force ret_to_user to reload the registers: */
+ fpsimd_flush_task_state(current);
+ set_thread_flag(TIF_FOREIGN_FPSTATE);
+
+ if (test_and_set_thread_flag(TIF_SVE))
+ WARN_ON(1); /* SVE access shouldn't have trapped */
+
+ local_bh_enable();
+}
+
+/*
* Trapped FP/ASIMD access.
*/
asmlinkage void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs)
@@ -145,8 +428,8 @@ void fpsimd_thread_switch(struct task_struct *next)
* the registers is in fact the most recent userland FPSIMD state of
* 'current'.
*/
- if (current->mm && !test_thread_flag(TIF_FOREIGN_FPSTATE))
- fpsimd_save_state(¤t->thread.fpsimd_state);
+ if (current->mm)
+ task_fpsimd_save();
if (next->mm) {
/*
@@ -168,6 +451,8 @@ void fpsimd_thread_switch(struct task_struct *next)
void fpsimd_flush_thread(void)
{
+ int vl;
+
if (!system_supports_fpsimd())
return;
@@ -175,6 +460,30 @@ void fpsimd_flush_thread(void)
memset(¤t->thread.fpsimd_state, 0, sizeof(struct fpsimd_state));
fpsimd_flush_task_state(current);
+
+ if (system_supports_sve()) {
+ clear_thread_flag(TIF_SVE);
+ sve_free(current);
+
+ /*
+ * Reset the task vector length as required.
+ * This is where we ensure that all user tasks have a valid
+ * vector length configured: no kernel task can become a user
+ * task without an exec and hence a call to this function.
+ * If a bug causes this to go wrong, we make some noise and
+ * try to fudge thread.sve_vl to a safe value here.
+ */
+ vl = current->thread.sve_vl;
+
+ if (vl == 0)
+ vl = SVE_VL_MIN;
+
+ if (WARN_ON(!sve_vl_valid(vl)))
+ vl = SVE_VL_MIN;
+
+ current->thread.sve_vl = vl;
+ }
+
set_thread_flag(TIF_FOREIGN_FPSTATE);
local_bh_enable();
@@ -183,6 +492,9 @@ void fpsimd_flush_thread(void)
/*
* Save the userland FPSIMD state of 'current' to memory, but only if the state
* currently held in the registers does in fact belong to 'current'
+ *
+ * Currently, SVE tasks can't exist, so just WARN in that case.
+ * Subsequent patches will add full SVE support here.
*/
void fpsimd_preserve_current_state(void)
{
@@ -194,6 +506,8 @@ void fpsimd_preserve_current_state(void)
if (!test_thread_flag(TIF_FOREIGN_FPSTATE))
fpsimd_save_state(¤t->thread.fpsimd_state);
+ WARN_ON_ONCE(test_and_clear_thread_flag(TIF_SVE));
+
local_bh_enable();
}
@@ -212,7 +526,7 @@ void fpsimd_restore_current_state(void)
if (test_and_clear_thread_flag(TIF_FOREIGN_FPSTATE)) {
struct fpsimd_state *st = ¤t->thread.fpsimd_state;
- fpsimd_load_state(st);
+ task_fpsimd_load();
__this_cpu_write(fpsimd_last_state, st);
st->cpu = smp_processor_id();
}
@@ -381,8 +695,8 @@ static int fpsimd_cpu_pm_notifier(struct notifier_block *self,
{
switch (cmd) {
case CPU_PM_ENTER:
- if (current->mm && !test_thread_flag(TIF_FOREIGN_FPSTATE))
- fpsimd_save_state(¤t->thread.fpsimd_state);
+ if (current->mm)
+ task_fpsimd_save();
this_cpu_write(fpsimd_last_state, NULL);
break;
case CPU_PM_EXIT:
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index c15ec41..b2adcce 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -49,6 +49,7 @@
#include <linux/notifier.h>
#include <trace/events/power.h>
#include <linux/percpu.h>
+#include <linux/thread_info.h>
#include <asm/alternative.h>
#include <asm/compat.h>
@@ -273,11 +274,27 @@ void release_thread(struct task_struct *dead_task)
{
}
+void arch_release_task_struct(struct task_struct *tsk)
+{
+ fpsimd_release_task(tsk);
+}
+
+/*
+ * src and dst may temporarily have aliased sve_state after task_struct
+ * is copied. We cannot fix this properly here, because src may have
+ * live SVE state and dst's thread_info may not exist yet, so tweaking
+ * either src's or dst's TIF_SVE is not safe.
+ *
+ * The unaliasing is done in copy_thread() instead. This works because
+ * dst is not schedulable or traceable until both of these functions
+ * have been called.
+ */
int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
{
if (current->mm)
fpsimd_preserve_current_state();
*dst = *src;
+
return 0;
}
@@ -290,6 +307,13 @@ int copy_thread(unsigned long clone_flags, unsigned long stack_start,
memset(&p->thread.cpu_context, 0, sizeof(struct cpu_context));
+ /*
+ * Unalias p->thread.sve_state (if any) from the parent task
+ * and disable discard SVE state for p:
+ */
+ clear_tsk_thread_flag(p, TIF_SVE);
+ p->thread.sve_state = NULL;
+
if (likely(!(p->flags & PF_KTHREAD))) {
*childregs = *current_pt_regs();
childregs->regs[0] = 0;
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index 18c0290..9d3c7f0 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -310,8 +310,8 @@ static int call_undef_hook(struct pt_regs *regs)
return fn ? fn(regs, instr) : 1;
}
-static void force_signal_inject(int signal, int code, struct pt_regs *regs,
- unsigned long address)
+void force_signal_inject(int signal, int code, struct pt_regs *regs,
+ unsigned long address)
{
siginfo_t info;
void __user *pc = (void __user *)instruction_pointer(regs);
@@ -325,7 +325,7 @@ static void force_signal_inject(int signal, int code, struct pt_regs *regs,
desc = "illegal memory access";
break;
default:
- desc = "bad mode";
+ desc = "unknown or unrecoverable error";
break;
}
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 14/30] arm64/sve: Support vector length resetting for new processes
2017-10-31 15:50 ` Dave Martin
@ 2017-10-31 15:51 ` Dave Martin
-1 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
It's desirable to be able to reset the vector length to some sane
default for new processes, since the new binary and its libraries
may or may not be SVE-aware.
This patch tracks the desired post-exec vector length (if any) in a
new thread member sve_vl_onexec, and adds a new thread flag
TIF_SVE_VL_INHERIT to control whether to inherit or reset the
vector length. Currently these are inactive. Subsequent patches
will provide the capability to configure them.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
arch/arm64/include/asm/processor.h | 1 +
arch/arm64/include/asm/thread_info.h | 1 +
arch/arm64/kernel/fpsimd.c | 16 ++++++++++++----
3 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index e2f575d..c6fddb0 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -107,6 +107,7 @@ struct thread_struct {
struct fpsimd_state fpsimd_state;
void *sve_state; /* SVE registers, if any */
unsigned int sve_vl; /* SVE vector length */
+ unsigned int sve_vl_onexec; /* SVE vl after next exec */
unsigned long fault_address; /* fault info */
unsigned long fault_code; /* ESR_EL1 value */
struct debug_info debug; /* debugging */
diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
index 92b7b48..eb43128 100644
--- a/arch/arm64/include/asm/thread_info.h
+++ b/arch/arm64/include/asm/thread_info.h
@@ -95,6 +95,7 @@ void arch_release_task_struct(struct task_struct *tsk);
#define TIF_SINGLESTEP 21
#define TIF_32BIT 22 /* 32bit process */
#define TIF_SVE 23 /* Scalable Vector Extension in use */
+#define TIF_SVE_VL_INHERIT 24 /* Inherit sve_vl_onexec across exec */
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 787f5d3..c91be8e 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -110,6 +110,9 @@
*/
static DEFINE_PER_CPU(struct fpsimd_state *, fpsimd_last_state);
+/* Default VL for tasks that don't set it explicitly: */
+static int sve_default_vl = SVE_VL_MIN;
+
/*
* Call __sve_free() directly only if you know task can't be scheduled
* or preempted.
@@ -473,15 +476,20 @@ void fpsimd_flush_thread(void)
* If a bug causes this to go wrong, we make some noise and
* try to fudge thread.sve_vl to a safe value here.
*/
- vl = current->thread.sve_vl;
-
- if (vl == 0)
- vl = SVE_VL_MIN;
+ vl = current->thread.sve_vl_onexec ?
+ current->thread.sve_vl_onexec : sve_default_vl;
if (WARN_ON(!sve_vl_valid(vl)))
vl = SVE_VL_MIN;
current->thread.sve_vl = vl;
+
+ /*
+ * If the task is not set to inherit, ensure that the vector
+ * length will be reset by a subsequent exec:
+ */
+ if (!test_thread_flag(TIF_SVE_VL_INHERIT))
+ current->thread.sve_vl_onexec = 0;
}
set_thread_flag(TIF_FOREIGN_FPSTATE);
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 14/30] arm64/sve: Support vector length resetting for new processes
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
It's desirable to be able to reset the vector length to some sane
default for new processes, since the new binary and its libraries
may or may not be SVE-aware.
This patch tracks the desired post-exec vector length (if any) in a
new thread member sve_vl_onexec, and adds a new thread flag
TIF_SVE_VL_INHERIT to control whether to inherit or reset the
vector length. Currently these are inactive. Subsequent patches
will provide the capability to configure them.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
arch/arm64/include/asm/processor.h | 1 +
arch/arm64/include/asm/thread_info.h | 1 +
arch/arm64/kernel/fpsimd.c | 16 ++++++++++++----
3 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index e2f575d..c6fddb0 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -107,6 +107,7 @@ struct thread_struct {
struct fpsimd_state fpsimd_state;
void *sve_state; /* SVE registers, if any */
unsigned int sve_vl; /* SVE vector length */
+ unsigned int sve_vl_onexec; /* SVE vl after next exec */
unsigned long fault_address; /* fault info */
unsigned long fault_code; /* ESR_EL1 value */
struct debug_info debug; /* debugging */
diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
index 92b7b48..eb43128 100644
--- a/arch/arm64/include/asm/thread_info.h
+++ b/arch/arm64/include/asm/thread_info.h
@@ -95,6 +95,7 @@ void arch_release_task_struct(struct task_struct *tsk);
#define TIF_SINGLESTEP 21
#define TIF_32BIT 22 /* 32bit process */
#define TIF_SVE 23 /* Scalable Vector Extension in use */
+#define TIF_SVE_VL_INHERIT 24 /* Inherit sve_vl_onexec across exec */
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 787f5d3..c91be8e 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -110,6 +110,9 @@
*/
static DEFINE_PER_CPU(struct fpsimd_state *, fpsimd_last_state);
+/* Default VL for tasks that don't set it explicitly: */
+static int sve_default_vl = SVE_VL_MIN;
+
/*
* Call __sve_free() directly only if you know task can't be scheduled
* or preempted.
@@ -473,15 +476,20 @@ void fpsimd_flush_thread(void)
* If a bug causes this to go wrong, we make some noise and
* try to fudge thread.sve_vl to a safe value here.
*/
- vl = current->thread.sve_vl;
-
- if (vl == 0)
- vl = SVE_VL_MIN;
+ vl = current->thread.sve_vl_onexec ?
+ current->thread.sve_vl_onexec : sve_default_vl;
if (WARN_ON(!sve_vl_valid(vl)))
vl = SVE_VL_MIN;
current->thread.sve_vl = vl;
+
+ /*
+ * If the task is not set to inherit, ensure that the vector
+ * length will be reset by a subsequent exec:
+ */
+ if (!test_thread_flag(TIF_SVE_VL_INHERIT))
+ current->thread.sve_vl_onexec = 0;
}
set_thread_flag(TIF_FOREIGN_FPSTATE);
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 15/30] arm64/sve: Signal handling support
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-arch, Okamoto Takayuki, libc-alpha, Ard Biesheuvel,
Szabolcs Nagy, Catalin Marinas, Will Deacon, kvmarm
This patch implements support for saving and restoring the SVE
registers around signals.
A fixed-size header struct sve_context is always included in the
signal frame encoding the thread's vector length at the time of
signal delivery, optionally followed by a variable-layout structure
encoding the SVE registers.
Because of the need to preserve backwards compatibility, the FPSIMD
view of the SVE registers is always dumped as a struct
fpsimd_context in the usual way, in addition to any sve_context.
The SVE vector registers are dumped in full, including bits 127:0
of each register which alias the corresponding FPSIMD vector
registers in the hardware. To avoid any ambiguity about which
alias to restore during sigreturn, the kernel always restores bits
127:0 of each SVE vector register from the fpsimd_context in the
signal frame (which must be present): userspace needs to take this
into account if it wants to modify the SVE vector register contents
on return from a signal.
FPSR and FPCR, which are used by both FPSIMD and SVE, are not
included in sve_context because they are always present in
fpsimd_context anyway.
For signal delivery, a new helper
fpsimd_signal_preserve_current_state() is added to update _both_
the FPSIMD and SVE views in the task struct, to make it easier to
populate this information into the signal frame. Because of the
redundancy between the two views of the state, only one is updated
otherwise.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
---
**Dropped** Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
(Non-trivial changes.)
Changes since v4
----------------
Requested by Will Deacon:
* Fix inconsistent return semantics in restore_sve_fpsimd_context().
Currently a nonzero return value from __copy_from_user() is passed
back as-is to the caller or restore_sve_fpsimd_context(), rather than
translating it do an error code as is done elsewhere.
Callers of restore_sve_fpsimd_context() only care whether the return
value is 0 or not, so this isn't a big deal, but it is more
consistent to return proper error codes on failure in case we grow a
use for them later.
This patch returns -EFAULT in the __copy_from_user() error cases
that weren't explicitly handled.
Miscellaneous:
* Change inconsistent copy_to_user() calls to __copy_to_user() in
preserve_sve_context().
There are already __put_user_error() calls here.
The whole extended signal frame is already checked for
access_ok(VERIFY_WRITE) in get_sigframe().
---
arch/arm64/include/asm/fpsimd.h | 1 +
arch/arm64/kernel/fpsimd.c | 55 ++++++++++---
arch/arm64/kernel/signal.c | 167 ++++++++++++++++++++++++++++++++++++++--
arch/arm64/kernel/signal32.c | 2 +-
4 files changed, 206 insertions(+), 19 deletions(-)
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index 5655fe1..9bbd74c 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -63,6 +63,7 @@ extern void fpsimd_load_state(struct fpsimd_state *state);
extern void fpsimd_thread_switch(struct task_struct *next);
extern void fpsimd_flush_thread(void);
+extern void fpsimd_signal_preserve_current_state(void);
extern void fpsimd_preserve_current_state(void);
extern void fpsimd_restore_current_state(void);
extern void fpsimd_update_current_state(struct fpsimd_state *state);
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index c91be8e..e0b5ef5 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -299,6 +299,32 @@ static void fpsimd_to_sve(struct task_struct *task)
sizeof(fst->vregs[i]));
}
+/*
+ * Transfer the SVE state in task->thread.sve_state to
+ * task->thread.fpsimd_state.
+ *
+ * Task can be a non-runnable task, or current. In the latter case,
+ * softirqs (and preemption) must be disabled.
+ * task->thread.sve_state must point to at least sve_state_size(task)
+ * bytes of allocated kernel memory.
+ * task->thread.sve_state must be up to date before calling this function.
+ */
+static void sve_to_fpsimd(struct task_struct *task)
+{
+ unsigned int vq;
+ void const *sst = task->thread.sve_state;
+ struct fpsimd_state *fst = &task->thread.fpsimd_state;
+ unsigned int i;
+
+ if (!system_supports_sve())
+ return;
+
+ vq = sve_vq_from_vl(task->thread.sve_vl);
+ for (i = 0; i < 32; ++i)
+ memcpy(&fst->vregs[i], ZREG(sst, vq, i),
+ sizeof(fst->vregs[i]));
+}
+
#ifdef CONFIG_ARM64_SVE
/*
@@ -500,9 +526,6 @@ void fpsimd_flush_thread(void)
/*
* Save the userland FPSIMD state of 'current' to memory, but only if the state
* currently held in the registers does in fact belong to 'current'
- *
- * Currently, SVE tasks can't exist, so just WARN in that case.
- * Subsequent patches will add full SVE support here.
*/
void fpsimd_preserve_current_state(void)
{
@@ -510,16 +533,23 @@ void fpsimd_preserve_current_state(void)
return;
local_bh_disable();
-
- if (!test_thread_flag(TIF_FOREIGN_FPSTATE))
- fpsimd_save_state(¤t->thread.fpsimd_state);
-
- WARN_ON_ONCE(test_and_clear_thread_flag(TIF_SVE));
-
+ task_fpsimd_save();
local_bh_enable();
}
/*
+ * Like fpsimd_preserve_current_state(), but ensure that
+ * current->thread.fpsimd_state is updated so that it can be copied to
+ * the signal frame.
+ */
+void fpsimd_signal_preserve_current_state(void)
+{
+ fpsimd_preserve_current_state();
+ if (system_supports_sve() && test_thread_flag(TIF_SVE))
+ sve_to_fpsimd(current);
+}
+
+/*
* Load the userland FPSIMD state of 'current' from memory, but only if the
* FPSIMD state already held in the registers is /not/ the most recent FPSIMD
* state of 'current'
@@ -554,7 +584,12 @@ void fpsimd_update_current_state(struct fpsimd_state *state)
local_bh_disable();
- fpsimd_load_state(state);
+ if (system_supports_sve() && test_thread_flag(TIF_SVE)) {
+ current->thread.fpsimd_state = *state;
+ fpsimd_to_sve(current);
+ }
+ task_fpsimd_load();
+
if (test_and_clear_thread_flag(TIF_FOREIGN_FPSTATE)) {
struct fpsimd_state *st = ¤t->thread.fpsimd_state;
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 4716729..64abf88 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -63,6 +63,7 @@ struct rt_sigframe_user_layout {
unsigned long fpsimd_offset;
unsigned long esr_offset;
+ unsigned long sve_offset;
unsigned long extra_offset;
unsigned long end_offset;
};
@@ -179,9 +180,6 @@ static int preserve_fpsimd_context(struct fpsimd_context __user *ctx)
struct fpsimd_state *fpsimd = ¤t->thread.fpsimd_state;
int err;
- /* dump the hardware registers to the fpsimd_state structure */
- fpsimd_preserve_current_state();
-
/* copy the FP and status/control registers */
err = __copy_to_user(ctx->vregs, fpsimd->vregs, sizeof(fpsimd->vregs));
__put_user_error(fpsimd->fpsr, &ctx->fpsr, err);
@@ -214,6 +212,8 @@ static int restore_fpsimd_context(struct fpsimd_context __user *ctx)
__get_user_error(fpsimd.fpsr, &ctx->fpsr, err);
__get_user_error(fpsimd.fpcr, &ctx->fpcr, err);
+ clear_thread_flag(TIF_SVE);
+
/* load the hardware registers from the fpsimd_state structure */
if (!err)
fpsimd_update_current_state(&fpsimd);
@@ -221,10 +221,118 @@ static int restore_fpsimd_context(struct fpsimd_context __user *ctx)
return err ? -EFAULT : 0;
}
+
struct user_ctxs {
struct fpsimd_context __user *fpsimd;
+ struct sve_context __user *sve;
};
+#ifdef CONFIG_ARM64_SVE
+
+static int preserve_sve_context(struct sve_context __user *ctx)
+{
+ int err = 0;
+ u16 reserved[ARRAY_SIZE(ctx->__reserved)];
+ unsigned int vl = current->thread.sve_vl;
+ unsigned int vq = 0;
+
+ if (test_thread_flag(TIF_SVE))
+ vq = sve_vq_from_vl(vl);
+
+ memset(reserved, 0, sizeof(reserved));
+
+ __put_user_error(SVE_MAGIC, &ctx->head.magic, err);
+ __put_user_error(round_up(SVE_SIG_CONTEXT_SIZE(vq), 16),
+ &ctx->head.size, err);
+ __put_user_error(vl, &ctx->vl, err);
+ BUILD_BUG_ON(sizeof(ctx->__reserved) != sizeof(reserved));
+ err |= __copy_to_user(&ctx->__reserved, reserved, sizeof(reserved));
+
+ if (vq) {
+ /*
+ * This assumes that the SVE state has already been saved to
+ * the task struct by calling preserve_fpsimd_context().
+ */
+ err |= __copy_to_user((char __user *)ctx + SVE_SIG_REGS_OFFSET,
+ current->thread.sve_state,
+ SVE_SIG_REGS_SIZE(vq));
+ }
+
+ return err ? -EFAULT : 0;
+}
+
+static int restore_sve_fpsimd_context(struct user_ctxs *user)
+{
+ int err;
+ unsigned int vq;
+ struct fpsimd_state fpsimd;
+ struct sve_context sve;
+
+ if (__copy_from_user(&sve, user->sve, sizeof(sve)))
+ return -EFAULT;
+
+ if (sve.vl != current->thread.sve_vl)
+ return -EINVAL;
+
+ if (sve.head.size <= sizeof(*user->sve)) {
+ clear_thread_flag(TIF_SVE);
+ goto fpsimd_only;
+ }
+
+ vq = sve_vq_from_vl(sve.vl);
+
+ if (sve.head.size < SVE_SIG_CONTEXT_SIZE(vq))
+ return -EINVAL;
+
+ /*
+ * Careful: we are about __copy_from_user() directly into
+ * thread.sve_state with preemption enabled, so protection is
+ * needed to prevent a racing context switch from writing stale
+ * registers back over the new data.
+ */
+
+ fpsimd_flush_task_state(current);
+ barrier();
+ /* From now, fpsimd_thread_switch() won't clear TIF_FOREIGN_FPSTATE */
+
+ set_thread_flag(TIF_FOREIGN_FPSTATE);
+ barrier();
+ /* From now, fpsimd_thread_switch() won't touch thread.sve_state */
+
+ sve_alloc(current);
+ err = __copy_from_user(current->thread.sve_state,
+ (char __user const *)user->sve +
+ SVE_SIG_REGS_OFFSET,
+ SVE_SIG_REGS_SIZE(vq));
+ if (err)
+ return -EFAULT;
+
+ set_thread_flag(TIF_SVE);
+
+fpsimd_only:
+ /* copy the FP and status/control registers */
+ /* restore_sigframe() already checked that user->fpsimd != NULL. */
+ err = __copy_from_user(fpsimd.vregs, user->fpsimd->vregs,
+ sizeof(fpsimd.vregs));
+ __get_user_error(fpsimd.fpsr, &user->fpsimd->fpsr, err);
+ __get_user_error(fpsimd.fpcr, &user->fpsimd->fpcr, err);
+
+ /* load the hardware registers from the fpsimd_state structure */
+ if (!err)
+ fpsimd_update_current_state(&fpsimd);
+
+ return err ? -EFAULT : 0;
+}
+
+#else /* ! CONFIG_ARM64_SVE */
+
+/* Turn any non-optimised out attempts to use these into a link error: */
+extern int preserve_sve_context(void __user *ctx);
+extern int restore_sve_fpsimd_context(struct user_ctxs *user);
+
+#endif /* ! CONFIG_ARM64_SVE */
+
+
static int parse_user_sigframe(struct user_ctxs *user,
struct rt_sigframe __user *sf)
{
@@ -237,6 +345,7 @@ static int parse_user_sigframe(struct user_ctxs *user,
char const __user *const sfp = (char const __user *)sf;
user->fpsimd = NULL;
+ user->sve = NULL;
if (!IS_ALIGNED((unsigned long)base, 16))
goto invalid;
@@ -287,6 +396,19 @@ static int parse_user_sigframe(struct user_ctxs *user,
/* ignore */
break;
+ case SVE_MAGIC:
+ if (!system_supports_sve())
+ goto invalid;
+
+ if (user->sve)
+ goto invalid;
+
+ if (size < sizeof(*user->sve))
+ goto invalid;
+
+ user->sve = (struct sve_context __user *)head;
+ break;
+
case EXTRA_MAGIC:
if (have_extra_context)
goto invalid;
@@ -363,9 +485,6 @@ static int parse_user_sigframe(struct user_ctxs *user,
}
done:
- if (!user->fpsimd)
- goto invalid;
-
return 0;
invalid:
@@ -399,8 +518,19 @@ static int restore_sigframe(struct pt_regs *regs,
if (err == 0)
err = parse_user_sigframe(&user, sf);
- if (err == 0)
- err = restore_fpsimd_context(user.fpsimd);
+ if (err == 0) {
+ if (!user.fpsimd)
+ return -EINVAL;
+
+ if (user.sve) {
+ if (!system_supports_sve())
+ return -EINVAL;
+
+ err = restore_sve_fpsimd_context(&user);
+ } else {
+ err = restore_fpsimd_context(user.fpsimd);
+ }
+ }
return err;
}
@@ -459,6 +589,18 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user)
return err;
}
+ if (system_supports_sve()) {
+ unsigned int vq = 0;
+
+ if (test_thread_flag(TIF_SVE))
+ vq = sve_vq_from_vl(current->thread.sve_vl);
+
+ err = sigframe_alloc(user, &user->sve_offset,
+ SVE_SIG_CONTEXT_SIZE(vq));
+ if (err)
+ return err;
+ }
+
return sigframe_alloc_end(user);
}
@@ -500,6 +642,13 @@ static int setup_sigframe(struct rt_sigframe_user_layout *user,
__put_user_error(current->thread.fault_code, &esr_ctx->esr, err);
}
+ /* Scalable Vector Extension state, if present */
+ if (system_supports_sve() && err == 0 && user->sve_offset) {
+ struct sve_context __user *sve_ctx =
+ apply_user_offset(user, user->sve_offset);
+ err |= preserve_sve_context(sve_ctx);
+ }
+
if (err == 0 && user->extra_offset) {
char __user *sfp = (char __user *)user->sigframe;
char __user *userp =
@@ -599,6 +748,8 @@ static int setup_rt_frame(int usig, struct ksignal *ksig, sigset_t *set,
struct rt_sigframe __user *frame;
int err = 0;
+ fpsimd_signal_preserve_current_state();
+
if (get_sigframe(&user, ksig, regs))
return 1;
diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c
index e09bf5d..22711ee 100644
--- a/arch/arm64/kernel/signal32.c
+++ b/arch/arm64/kernel/signal32.c
@@ -239,7 +239,7 @@ static int compat_preserve_vfp_context(struct compat_vfp_sigframe __user *frame)
* Note that this also saves V16-31, which aren't visible
* in AArch32.
*/
- fpsimd_preserve_current_state();
+ fpsimd_signal_preserve_current_state();
/* Place structure header on the stack */
__put_user_error(magic, &frame->magic, err);
--
2.1.4
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 15/30] arm64/sve: Signal handling support
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
This patch implements support for saving and restoring the SVE
registers around signals.
A fixed-size header struct sve_context is always included in the
signal frame encoding the thread's vector length at the time of
signal delivery, optionally followed by a variable-layout structure
encoding the SVE registers.
Because of the need to preserve backwards compatibility, the FPSIMD
view of the SVE registers is always dumped as a struct
fpsimd_context in the usual way, in addition to any sve_context.
The SVE vector registers are dumped in full, including bits 127:0
of each register which alias the corresponding FPSIMD vector
registers in the hardware. To avoid any ambiguity about which
alias to restore during sigreturn, the kernel always restores bits
127:0 of each SVE vector register from the fpsimd_context in the
signal frame (which must be present): userspace needs to take this
into account if it wants to modify the SVE vector register contents
on return from a signal.
FPSR and FPCR, which are used by both FPSIMD and SVE, are not
included in sve_context because they are always present in
fpsimd_context anyway.
For signal delivery, a new helper
fpsimd_signal_preserve_current_state() is added to update _both_
the FPSIMD and SVE views in the task struct, to make it easier to
populate this information into the signal frame. Because of the
redundancy between the two views of the state, only one is updated
otherwise.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
---
**Dropped** Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
(Non-trivial changes.)
Changes since v4
----------------
Requested by Will Deacon:
* Fix inconsistent return semantics in restore_sve_fpsimd_context().
Currently a nonzero return value from __copy_from_user() is passed
back as-is to the caller or restore_sve_fpsimd_context(), rather than
translating it do an error code as is done elsewhere.
Callers of restore_sve_fpsimd_context() only care whether the return
value is 0 or not, so this isn't a big deal, but it is more
consistent to return proper error codes on failure in case we grow a
use for them later.
This patch returns -EFAULT in the __copy_from_user() error cases
that weren't explicitly handled.
Miscellaneous:
* Change inconsistent copy_to_user() calls to __copy_to_user() in
preserve_sve_context().
There are already __put_user_error() calls here.
The whole extended signal frame is already checked for
access_ok(VERIFY_WRITE) in get_sigframe().
---
arch/arm64/include/asm/fpsimd.h | 1 +
arch/arm64/kernel/fpsimd.c | 55 ++++++++++---
arch/arm64/kernel/signal.c | 167 ++++++++++++++++++++++++++++++++++++++--
arch/arm64/kernel/signal32.c | 2 +-
4 files changed, 206 insertions(+), 19 deletions(-)
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index 5655fe1..9bbd74c 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -63,6 +63,7 @@ extern void fpsimd_load_state(struct fpsimd_state *state);
extern void fpsimd_thread_switch(struct task_struct *next);
extern void fpsimd_flush_thread(void);
+extern void fpsimd_signal_preserve_current_state(void);
extern void fpsimd_preserve_current_state(void);
extern void fpsimd_restore_current_state(void);
extern void fpsimd_update_current_state(struct fpsimd_state *state);
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index c91be8e..e0b5ef5 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -299,6 +299,32 @@ static void fpsimd_to_sve(struct task_struct *task)
sizeof(fst->vregs[i]));
}
+/*
+ * Transfer the SVE state in task->thread.sve_state to
+ * task->thread.fpsimd_state.
+ *
+ * Task can be a non-runnable task, or current. In the latter case,
+ * softirqs (and preemption) must be disabled.
+ * task->thread.sve_state must point to at least sve_state_size(task)
+ * bytes of allocated kernel memory.
+ * task->thread.sve_state must be up to date before calling this function.
+ */
+static void sve_to_fpsimd(struct task_struct *task)
+{
+ unsigned int vq;
+ void const *sst = task->thread.sve_state;
+ struct fpsimd_state *fst = &task->thread.fpsimd_state;
+ unsigned int i;
+
+ if (!system_supports_sve())
+ return;
+
+ vq = sve_vq_from_vl(task->thread.sve_vl);
+ for (i = 0; i < 32; ++i)
+ memcpy(&fst->vregs[i], ZREG(sst, vq, i),
+ sizeof(fst->vregs[i]));
+}
+
#ifdef CONFIG_ARM64_SVE
/*
@@ -500,9 +526,6 @@ void fpsimd_flush_thread(void)
/*
* Save the userland FPSIMD state of 'current' to memory, but only if the state
* currently held in the registers does in fact belong to 'current'
- *
- * Currently, SVE tasks can't exist, so just WARN in that case.
- * Subsequent patches will add full SVE support here.
*/
void fpsimd_preserve_current_state(void)
{
@@ -510,16 +533,23 @@ void fpsimd_preserve_current_state(void)
return;
local_bh_disable();
-
- if (!test_thread_flag(TIF_FOREIGN_FPSTATE))
- fpsimd_save_state(¤t->thread.fpsimd_state);
-
- WARN_ON_ONCE(test_and_clear_thread_flag(TIF_SVE));
-
+ task_fpsimd_save();
local_bh_enable();
}
/*
+ * Like fpsimd_preserve_current_state(), but ensure that
+ * current->thread.fpsimd_state is updated so that it can be copied to
+ * the signal frame.
+ */
+void fpsimd_signal_preserve_current_state(void)
+{
+ fpsimd_preserve_current_state();
+ if (system_supports_sve() && test_thread_flag(TIF_SVE))
+ sve_to_fpsimd(current);
+}
+
+/*
* Load the userland FPSIMD state of 'current' from memory, but only if the
* FPSIMD state already held in the registers is /not/ the most recent FPSIMD
* state of 'current'
@@ -554,7 +584,12 @@ void fpsimd_update_current_state(struct fpsimd_state *state)
local_bh_disable();
- fpsimd_load_state(state);
+ if (system_supports_sve() && test_thread_flag(TIF_SVE)) {
+ current->thread.fpsimd_state = *state;
+ fpsimd_to_sve(current);
+ }
+ task_fpsimd_load();
+
if (test_and_clear_thread_flag(TIF_FOREIGN_FPSTATE)) {
struct fpsimd_state *st = ¤t->thread.fpsimd_state;
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 4716729..64abf88 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -63,6 +63,7 @@ struct rt_sigframe_user_layout {
unsigned long fpsimd_offset;
unsigned long esr_offset;
+ unsigned long sve_offset;
unsigned long extra_offset;
unsigned long end_offset;
};
@@ -179,9 +180,6 @@ static int preserve_fpsimd_context(struct fpsimd_context __user *ctx)
struct fpsimd_state *fpsimd = ¤t->thread.fpsimd_state;
int err;
- /* dump the hardware registers to the fpsimd_state structure */
- fpsimd_preserve_current_state();
-
/* copy the FP and status/control registers */
err = __copy_to_user(ctx->vregs, fpsimd->vregs, sizeof(fpsimd->vregs));
__put_user_error(fpsimd->fpsr, &ctx->fpsr, err);
@@ -214,6 +212,8 @@ static int restore_fpsimd_context(struct fpsimd_context __user *ctx)
__get_user_error(fpsimd.fpsr, &ctx->fpsr, err);
__get_user_error(fpsimd.fpcr, &ctx->fpcr, err);
+ clear_thread_flag(TIF_SVE);
+
/* load the hardware registers from the fpsimd_state structure */
if (!err)
fpsimd_update_current_state(&fpsimd);
@@ -221,10 +221,118 @@ static int restore_fpsimd_context(struct fpsimd_context __user *ctx)
return err ? -EFAULT : 0;
}
+
struct user_ctxs {
struct fpsimd_context __user *fpsimd;
+ struct sve_context __user *sve;
};
+#ifdef CONFIG_ARM64_SVE
+
+static int preserve_sve_context(struct sve_context __user *ctx)
+{
+ int err = 0;
+ u16 reserved[ARRAY_SIZE(ctx->__reserved)];
+ unsigned int vl = current->thread.sve_vl;
+ unsigned int vq = 0;
+
+ if (test_thread_flag(TIF_SVE))
+ vq = sve_vq_from_vl(vl);
+
+ memset(reserved, 0, sizeof(reserved));
+
+ __put_user_error(SVE_MAGIC, &ctx->head.magic, err);
+ __put_user_error(round_up(SVE_SIG_CONTEXT_SIZE(vq), 16),
+ &ctx->head.size, err);
+ __put_user_error(vl, &ctx->vl, err);
+ BUILD_BUG_ON(sizeof(ctx->__reserved) != sizeof(reserved));
+ err |= __copy_to_user(&ctx->__reserved, reserved, sizeof(reserved));
+
+ if (vq) {
+ /*
+ * This assumes that the SVE state has already been saved to
+ * the task struct by calling preserve_fpsimd_context().
+ */
+ err |= __copy_to_user((char __user *)ctx + SVE_SIG_REGS_OFFSET,
+ current->thread.sve_state,
+ SVE_SIG_REGS_SIZE(vq));
+ }
+
+ return err ? -EFAULT : 0;
+}
+
+static int restore_sve_fpsimd_context(struct user_ctxs *user)
+{
+ int err;
+ unsigned int vq;
+ struct fpsimd_state fpsimd;
+ struct sve_context sve;
+
+ if (__copy_from_user(&sve, user->sve, sizeof(sve)))
+ return -EFAULT;
+
+ if (sve.vl != current->thread.sve_vl)
+ return -EINVAL;
+
+ if (sve.head.size <= sizeof(*user->sve)) {
+ clear_thread_flag(TIF_SVE);
+ goto fpsimd_only;
+ }
+
+ vq = sve_vq_from_vl(sve.vl);
+
+ if (sve.head.size < SVE_SIG_CONTEXT_SIZE(vq))
+ return -EINVAL;
+
+ /*
+ * Careful: we are about __copy_from_user() directly into
+ * thread.sve_state with preemption enabled, so protection is
+ * needed to prevent a racing context switch from writing stale
+ * registers back over the new data.
+ */
+
+ fpsimd_flush_task_state(current);
+ barrier();
+ /* From now, fpsimd_thread_switch() won't clear TIF_FOREIGN_FPSTATE */
+
+ set_thread_flag(TIF_FOREIGN_FPSTATE);
+ barrier();
+ /* From now, fpsimd_thread_switch() won't touch thread.sve_state */
+
+ sve_alloc(current);
+ err = __copy_from_user(current->thread.sve_state,
+ (char __user const *)user->sve +
+ SVE_SIG_REGS_OFFSET,
+ SVE_SIG_REGS_SIZE(vq));
+ if (err)
+ return -EFAULT;
+
+ set_thread_flag(TIF_SVE);
+
+fpsimd_only:
+ /* copy the FP and status/control registers */
+ /* restore_sigframe() already checked that user->fpsimd != NULL. */
+ err = __copy_from_user(fpsimd.vregs, user->fpsimd->vregs,
+ sizeof(fpsimd.vregs));
+ __get_user_error(fpsimd.fpsr, &user->fpsimd->fpsr, err);
+ __get_user_error(fpsimd.fpcr, &user->fpsimd->fpcr, err);
+
+ /* load the hardware registers from the fpsimd_state structure */
+ if (!err)
+ fpsimd_update_current_state(&fpsimd);
+
+ return err ? -EFAULT : 0;
+}
+
+#else /* ! CONFIG_ARM64_SVE */
+
+/* Turn any non-optimised out attempts to use these into a link error: */
+extern int preserve_sve_context(void __user *ctx);
+extern int restore_sve_fpsimd_context(struct user_ctxs *user);
+
+#endif /* ! CONFIG_ARM64_SVE */
+
+
static int parse_user_sigframe(struct user_ctxs *user,
struct rt_sigframe __user *sf)
{
@@ -237,6 +345,7 @@ static int parse_user_sigframe(struct user_ctxs *user,
char const __user *const sfp = (char const __user *)sf;
user->fpsimd = NULL;
+ user->sve = NULL;
if (!IS_ALIGNED((unsigned long)base, 16))
goto invalid;
@@ -287,6 +396,19 @@ static int parse_user_sigframe(struct user_ctxs *user,
/* ignore */
break;
+ case SVE_MAGIC:
+ if (!system_supports_sve())
+ goto invalid;
+
+ if (user->sve)
+ goto invalid;
+
+ if (size < sizeof(*user->sve))
+ goto invalid;
+
+ user->sve = (struct sve_context __user *)head;
+ break;
+
case EXTRA_MAGIC:
if (have_extra_context)
goto invalid;
@@ -363,9 +485,6 @@ static int parse_user_sigframe(struct user_ctxs *user,
}
done:
- if (!user->fpsimd)
- goto invalid;
-
return 0;
invalid:
@@ -399,8 +518,19 @@ static int restore_sigframe(struct pt_regs *regs,
if (err == 0)
err = parse_user_sigframe(&user, sf);
- if (err == 0)
- err = restore_fpsimd_context(user.fpsimd);
+ if (err == 0) {
+ if (!user.fpsimd)
+ return -EINVAL;
+
+ if (user.sve) {
+ if (!system_supports_sve())
+ return -EINVAL;
+
+ err = restore_sve_fpsimd_context(&user);
+ } else {
+ err = restore_fpsimd_context(user.fpsimd);
+ }
+ }
return err;
}
@@ -459,6 +589,18 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user)
return err;
}
+ if (system_supports_sve()) {
+ unsigned int vq = 0;
+
+ if (test_thread_flag(TIF_SVE))
+ vq = sve_vq_from_vl(current->thread.sve_vl);
+
+ err = sigframe_alloc(user, &user->sve_offset,
+ SVE_SIG_CONTEXT_SIZE(vq));
+ if (err)
+ return err;
+ }
+
return sigframe_alloc_end(user);
}
@@ -500,6 +642,13 @@ static int setup_sigframe(struct rt_sigframe_user_layout *user,
__put_user_error(current->thread.fault_code, &esr_ctx->esr, err);
}
+ /* Scalable Vector Extension state, if present */
+ if (system_supports_sve() && err == 0 && user->sve_offset) {
+ struct sve_context __user *sve_ctx =
+ apply_user_offset(user, user->sve_offset);
+ err |= preserve_sve_context(sve_ctx);
+ }
+
if (err == 0 && user->extra_offset) {
char __user *sfp = (char __user *)user->sigframe;
char __user *userp =
@@ -599,6 +748,8 @@ static int setup_rt_frame(int usig, struct ksignal *ksig, sigset_t *set,
struct rt_sigframe __user *frame;
int err = 0;
+ fpsimd_signal_preserve_current_state();
+
if (get_sigframe(&user, ksig, regs))
return 1;
diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c
index e09bf5d..22711ee 100644
--- a/arch/arm64/kernel/signal32.c
+++ b/arch/arm64/kernel/signal32.c
@@ -239,7 +239,7 @@ static int compat_preserve_vfp_context(struct compat_vfp_sigframe __user *frame)
* Note that this also saves V16-31, which aren't visible
* in AArch32.
*/
- fpsimd_preserve_current_state();
+ fpsimd_signal_preserve_current_state();
/* Place structure header on the stack */
__put_user_error(magic, &frame->magic, err);
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 15/30] arm64/sve: Signal handling support
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
This patch implements support for saving and restoring the SVE
registers around signals.
A fixed-size header struct sve_context is always included in the
signal frame encoding the thread's vector length at the time of
signal delivery, optionally followed by a variable-layout structure
encoding the SVE registers.
Because of the need to preserve backwards compatibility, the FPSIMD
view of the SVE registers is always dumped as a struct
fpsimd_context in the usual way, in addition to any sve_context.
The SVE vector registers are dumped in full, including bits 127:0
of each register which alias the corresponding FPSIMD vector
registers in the hardware. To avoid any ambiguity about which
alias to restore during sigreturn, the kernel always restores bits
127:0 of each SVE vector register from the fpsimd_context in the
signal frame (which must be present): userspace needs to take this
into account if it wants to modify the SVE vector register contents
on return from a signal.
FPSR and FPCR, which are used by both FPSIMD and SVE, are not
included in sve_context because they are always present in
fpsimd_context anyway.
For signal delivery, a new helper
fpsimd_signal_preserve_current_state() is added to update _both_
the FPSIMD and SVE views in the task struct, to make it easier to
populate this information into the signal frame. Because of the
redundancy between the two views of the state, only one is updated
otherwise.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Cc: Alex Benn?e <alex.bennee@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
---
**Dropped** Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
(Non-trivial changes.)
Changes since v4
----------------
Requested by Will Deacon:
* Fix inconsistent return semantics in restore_sve_fpsimd_context().
Currently a nonzero return value from __copy_from_user() is passed
back as-is to the caller or restore_sve_fpsimd_context(), rather than
translating it do an error code as is done elsewhere.
Callers of restore_sve_fpsimd_context() only care whether the return
value is 0 or not, so this isn't a big deal, but it is more
consistent to return proper error codes on failure in case we grow a
use for them later.
This patch returns -EFAULT in the __copy_from_user() error cases
that weren't explicitly handled.
Miscellaneous:
* Change inconsistent copy_to_user() calls to __copy_to_user() in
preserve_sve_context().
There are already __put_user_error() calls here.
The whole extended signal frame is already checked for
access_ok(VERIFY_WRITE) in get_sigframe().
---
arch/arm64/include/asm/fpsimd.h | 1 +
arch/arm64/kernel/fpsimd.c | 55 ++++++++++---
arch/arm64/kernel/signal.c | 167 ++++++++++++++++++++++++++++++++++++++--
arch/arm64/kernel/signal32.c | 2 +-
4 files changed, 206 insertions(+), 19 deletions(-)
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index 5655fe1..9bbd74c 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -63,6 +63,7 @@ extern void fpsimd_load_state(struct fpsimd_state *state);
extern void fpsimd_thread_switch(struct task_struct *next);
extern void fpsimd_flush_thread(void);
+extern void fpsimd_signal_preserve_current_state(void);
extern void fpsimd_preserve_current_state(void);
extern void fpsimd_restore_current_state(void);
extern void fpsimd_update_current_state(struct fpsimd_state *state);
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index c91be8e..e0b5ef5 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -299,6 +299,32 @@ static void fpsimd_to_sve(struct task_struct *task)
sizeof(fst->vregs[i]));
}
+/*
+ * Transfer the SVE state in task->thread.sve_state to
+ * task->thread.fpsimd_state.
+ *
+ * Task can be a non-runnable task, or current. In the latter case,
+ * softirqs (and preemption) must be disabled.
+ * task->thread.sve_state must point to at least sve_state_size(task)
+ * bytes of allocated kernel memory.
+ * task->thread.sve_state must be up to date before calling this function.
+ */
+static void sve_to_fpsimd(struct task_struct *task)
+{
+ unsigned int vq;
+ void const *sst = task->thread.sve_state;
+ struct fpsimd_state *fst = &task->thread.fpsimd_state;
+ unsigned int i;
+
+ if (!system_supports_sve())
+ return;
+
+ vq = sve_vq_from_vl(task->thread.sve_vl);
+ for (i = 0; i < 32; ++i)
+ memcpy(&fst->vregs[i], ZREG(sst, vq, i),
+ sizeof(fst->vregs[i]));
+}
+
#ifdef CONFIG_ARM64_SVE
/*
@@ -500,9 +526,6 @@ void fpsimd_flush_thread(void)
/*
* Save the userland FPSIMD state of 'current' to memory, but only if the state
* currently held in the registers does in fact belong to 'current'
- *
- * Currently, SVE tasks can't exist, so just WARN in that case.
- * Subsequent patches will add full SVE support here.
*/
void fpsimd_preserve_current_state(void)
{
@@ -510,16 +533,23 @@ void fpsimd_preserve_current_state(void)
return;
local_bh_disable();
-
- if (!test_thread_flag(TIF_FOREIGN_FPSTATE))
- fpsimd_save_state(¤t->thread.fpsimd_state);
-
- WARN_ON_ONCE(test_and_clear_thread_flag(TIF_SVE));
-
+ task_fpsimd_save();
local_bh_enable();
}
/*
+ * Like fpsimd_preserve_current_state(), but ensure that
+ * current->thread.fpsimd_state is updated so that it can be copied to
+ * the signal frame.
+ */
+void fpsimd_signal_preserve_current_state(void)
+{
+ fpsimd_preserve_current_state();
+ if (system_supports_sve() && test_thread_flag(TIF_SVE))
+ sve_to_fpsimd(current);
+}
+
+/*
* Load the userland FPSIMD state of 'current' from memory, but only if the
* FPSIMD state already held in the registers is /not/ the most recent FPSIMD
* state of 'current'
@@ -554,7 +584,12 @@ void fpsimd_update_current_state(struct fpsimd_state *state)
local_bh_disable();
- fpsimd_load_state(state);
+ if (system_supports_sve() && test_thread_flag(TIF_SVE)) {
+ current->thread.fpsimd_state = *state;
+ fpsimd_to_sve(current);
+ }
+ task_fpsimd_load();
+
if (test_and_clear_thread_flag(TIF_FOREIGN_FPSTATE)) {
struct fpsimd_state *st = ¤t->thread.fpsimd_state;
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 4716729..64abf88 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -63,6 +63,7 @@ struct rt_sigframe_user_layout {
unsigned long fpsimd_offset;
unsigned long esr_offset;
+ unsigned long sve_offset;
unsigned long extra_offset;
unsigned long end_offset;
};
@@ -179,9 +180,6 @@ static int preserve_fpsimd_context(struct fpsimd_context __user *ctx)
struct fpsimd_state *fpsimd = ¤t->thread.fpsimd_state;
int err;
- /* dump the hardware registers to the fpsimd_state structure */
- fpsimd_preserve_current_state();
-
/* copy the FP and status/control registers */
err = __copy_to_user(ctx->vregs, fpsimd->vregs, sizeof(fpsimd->vregs));
__put_user_error(fpsimd->fpsr, &ctx->fpsr, err);
@@ -214,6 +212,8 @@ static int restore_fpsimd_context(struct fpsimd_context __user *ctx)
__get_user_error(fpsimd.fpsr, &ctx->fpsr, err);
__get_user_error(fpsimd.fpcr, &ctx->fpcr, err);
+ clear_thread_flag(TIF_SVE);
+
/* load the hardware registers from the fpsimd_state structure */
if (!err)
fpsimd_update_current_state(&fpsimd);
@@ -221,10 +221,118 @@ static int restore_fpsimd_context(struct fpsimd_context __user *ctx)
return err ? -EFAULT : 0;
}
+
struct user_ctxs {
struct fpsimd_context __user *fpsimd;
+ struct sve_context __user *sve;
};
+#ifdef CONFIG_ARM64_SVE
+
+static int preserve_sve_context(struct sve_context __user *ctx)
+{
+ int err = 0;
+ u16 reserved[ARRAY_SIZE(ctx->__reserved)];
+ unsigned int vl = current->thread.sve_vl;
+ unsigned int vq = 0;
+
+ if (test_thread_flag(TIF_SVE))
+ vq = sve_vq_from_vl(vl);
+
+ memset(reserved, 0, sizeof(reserved));
+
+ __put_user_error(SVE_MAGIC, &ctx->head.magic, err);
+ __put_user_error(round_up(SVE_SIG_CONTEXT_SIZE(vq), 16),
+ &ctx->head.size, err);
+ __put_user_error(vl, &ctx->vl, err);
+ BUILD_BUG_ON(sizeof(ctx->__reserved) != sizeof(reserved));
+ err |= __copy_to_user(&ctx->__reserved, reserved, sizeof(reserved));
+
+ if (vq) {
+ /*
+ * This assumes that the SVE state has already been saved to
+ * the task struct by calling preserve_fpsimd_context().
+ */
+ err |= __copy_to_user((char __user *)ctx + SVE_SIG_REGS_OFFSET,
+ current->thread.sve_state,
+ SVE_SIG_REGS_SIZE(vq));
+ }
+
+ return err ? -EFAULT : 0;
+}
+
+static int restore_sve_fpsimd_context(struct user_ctxs *user)
+{
+ int err;
+ unsigned int vq;
+ struct fpsimd_state fpsimd;
+ struct sve_context sve;
+
+ if (__copy_from_user(&sve, user->sve, sizeof(sve)))
+ return -EFAULT;
+
+ if (sve.vl != current->thread.sve_vl)
+ return -EINVAL;
+
+ if (sve.head.size <= sizeof(*user->sve)) {
+ clear_thread_flag(TIF_SVE);
+ goto fpsimd_only;
+ }
+
+ vq = sve_vq_from_vl(sve.vl);
+
+ if (sve.head.size < SVE_SIG_CONTEXT_SIZE(vq))
+ return -EINVAL;
+
+ /*
+ * Careful: we are about __copy_from_user() directly into
+ * thread.sve_state with preemption enabled, so protection is
+ * needed to prevent a racing context switch from writing stale
+ * registers back over the new data.
+ */
+
+ fpsimd_flush_task_state(current);
+ barrier();
+ /* From now, fpsimd_thread_switch() won't clear TIF_FOREIGN_FPSTATE */
+
+ set_thread_flag(TIF_FOREIGN_FPSTATE);
+ barrier();
+ /* From now, fpsimd_thread_switch() won't touch thread.sve_state */
+
+ sve_alloc(current);
+ err = __copy_from_user(current->thread.sve_state,
+ (char __user const *)user->sve +
+ SVE_SIG_REGS_OFFSET,
+ SVE_SIG_REGS_SIZE(vq));
+ if (err)
+ return -EFAULT;
+
+ set_thread_flag(TIF_SVE);
+
+fpsimd_only:
+ /* copy the FP and status/control registers */
+ /* restore_sigframe() already checked that user->fpsimd != NULL. */
+ err = __copy_from_user(fpsimd.vregs, user->fpsimd->vregs,
+ sizeof(fpsimd.vregs));
+ __get_user_error(fpsimd.fpsr, &user->fpsimd->fpsr, err);
+ __get_user_error(fpsimd.fpcr, &user->fpsimd->fpcr, err);
+
+ /* load the hardware registers from the fpsimd_state structure */
+ if (!err)
+ fpsimd_update_current_state(&fpsimd);
+
+ return err ? -EFAULT : 0;
+}
+
+#else /* ! CONFIG_ARM64_SVE */
+
+/* Turn any non-optimised out attempts to use these into a link error: */
+extern int preserve_sve_context(void __user *ctx);
+extern int restore_sve_fpsimd_context(struct user_ctxs *user);
+
+#endif /* ! CONFIG_ARM64_SVE */
+
+
static int parse_user_sigframe(struct user_ctxs *user,
struct rt_sigframe __user *sf)
{
@@ -237,6 +345,7 @@ static int parse_user_sigframe(struct user_ctxs *user,
char const __user *const sfp = (char const __user *)sf;
user->fpsimd = NULL;
+ user->sve = NULL;
if (!IS_ALIGNED((unsigned long)base, 16))
goto invalid;
@@ -287,6 +396,19 @@ static int parse_user_sigframe(struct user_ctxs *user,
/* ignore */
break;
+ case SVE_MAGIC:
+ if (!system_supports_sve())
+ goto invalid;
+
+ if (user->sve)
+ goto invalid;
+
+ if (size < sizeof(*user->sve))
+ goto invalid;
+
+ user->sve = (struct sve_context __user *)head;
+ break;
+
case EXTRA_MAGIC:
if (have_extra_context)
goto invalid;
@@ -363,9 +485,6 @@ static int parse_user_sigframe(struct user_ctxs *user,
}
done:
- if (!user->fpsimd)
- goto invalid;
-
return 0;
invalid:
@@ -399,8 +518,19 @@ static int restore_sigframe(struct pt_regs *regs,
if (err == 0)
err = parse_user_sigframe(&user, sf);
- if (err == 0)
- err = restore_fpsimd_context(user.fpsimd);
+ if (err == 0) {
+ if (!user.fpsimd)
+ return -EINVAL;
+
+ if (user.sve) {
+ if (!system_supports_sve())
+ return -EINVAL;
+
+ err = restore_sve_fpsimd_context(&user);
+ } else {
+ err = restore_fpsimd_context(user.fpsimd);
+ }
+ }
return err;
}
@@ -459,6 +589,18 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user)
return err;
}
+ if (system_supports_sve()) {
+ unsigned int vq = 0;
+
+ if (test_thread_flag(TIF_SVE))
+ vq = sve_vq_from_vl(current->thread.sve_vl);
+
+ err = sigframe_alloc(user, &user->sve_offset,
+ SVE_SIG_CONTEXT_SIZE(vq));
+ if (err)
+ return err;
+ }
+
return sigframe_alloc_end(user);
}
@@ -500,6 +642,13 @@ static int setup_sigframe(struct rt_sigframe_user_layout *user,
__put_user_error(current->thread.fault_code, &esr_ctx->esr, err);
}
+ /* Scalable Vector Extension state, if present */
+ if (system_supports_sve() && err == 0 && user->sve_offset) {
+ struct sve_context __user *sve_ctx =
+ apply_user_offset(user, user->sve_offset);
+ err |= preserve_sve_context(sve_ctx);
+ }
+
if (err == 0 && user->extra_offset) {
char __user *sfp = (char __user *)user->sigframe;
char __user *userp =
@@ -599,6 +748,8 @@ static int setup_rt_frame(int usig, struct ksignal *ksig, sigset_t *set,
struct rt_sigframe __user *frame;
int err = 0;
+ fpsimd_signal_preserve_current_state();
+
if (get_sigframe(&user, ksig, regs))
return 1;
diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c
index e09bf5d..22711ee 100644
--- a/arch/arm64/kernel/signal32.c
+++ b/arch/arm64/kernel/signal32.c
@@ -239,7 +239,7 @@ static int compat_preserve_vfp_context(struct compat_vfp_sigframe __user *frame)
* Note that this also saves V16-31, which aren't visible
* in AArch32.
*/
- fpsimd_preserve_current_state();
+ fpsimd_signal_preserve_current_state();
/* Place structure header on the stack */
__put_user_error(magic, &frame->magic, err);
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 16/30] arm64/sve: Backend logic for setting the vector length
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-arch, Okamoto Takayuki, libc-alpha, Ard Biesheuvel,
Szabolcs Nagy, Catalin Marinas, Will Deacon, kvmarm
This patch implements the core logic for changing a task's vector
length on request from userspace. This will be used by the ptrace
and prctl frontends that are implemented in later patches.
The SVE architecture permits, but does not require, implementations
to support vector lengths that are not a power of two. To handle
this, logic is added to check a requested vector length against a
possibly sparse bitmap of available vector lengths at runtime, so
that the best supported value can be chosen.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
---
arch/arm64/include/asm/fpsimd.h | 8 +++
arch/arm64/kernel/fpsimd.c | 137 +++++++++++++++++++++++++++++++++++++++-
include/uapi/linux/prctl.h | 5 ++
3 files changed, 149 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index 9bbd74c..86f550c 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -20,6 +20,7 @@
#ifndef __ASSEMBLY__
+#include <linux/cache.h>
#include <linux/stddef.h>
/*
@@ -70,17 +71,24 @@ extern void fpsimd_update_current_state(struct fpsimd_state *state);
extern void fpsimd_flush_task_state(struct task_struct *target);
+/* Maximum VL that SVE VL-agnostic software can transparently support */
+#define SVE_VL_ARCH_MAX 0x100
+
extern void sve_save_state(void *state, u32 *pfpsr);
extern void sve_load_state(void const *state, u32 const *pfpsr,
unsigned long vq_minus_1);
extern unsigned int sve_get_vl(void);
+extern int __ro_after_init sve_max_vl;
+
#ifdef CONFIG_ARM64_SVE
extern size_t sve_state_size(struct task_struct const *task);
extern void sve_alloc(struct task_struct *task);
extern void fpsimd_release_task(struct task_struct *task);
+extern int sve_set_vector_length(struct task_struct *task,
+ unsigned long vl, unsigned long flags);
#else /* ! CONFIG_ARM64_SVE */
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index e0b5ef5..1ceb069 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -17,8 +17,10 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <linux/bitmap.h>
#include <linux/bottom_half.h>
#include <linux/bug.h>
+#include <linux/cache.h>
#include <linux/compat.h>
#include <linux/cpu.h>
#include <linux/cpu_pm.h>
@@ -28,6 +30,7 @@
#include <linux/init.h>
#include <linux/percpu.h>
#include <linux/preempt.h>
+#include <linux/prctl.h>
#include <linux/ptrace.h>
#include <linux/sched/signal.h>
#include <linux/signal.h>
@@ -113,6 +116,20 @@ static DEFINE_PER_CPU(struct fpsimd_state *, fpsimd_last_state);
/* Default VL for tasks that don't set it explicitly: */
static int sve_default_vl = SVE_VL_MIN;
+#ifdef CONFIG_ARM64_SVE
+
+/* Maximum supported vector length across all CPUs (initially poisoned) */
+int __ro_after_init sve_max_vl = -1;
+/* Set of available vector lengths, as vq_to_bit(vq): */
+static DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
+
+#else /* ! CONFIG_ARM64_SVE */
+
+/* Dummy declaration for code that will be optimised out: */
+extern DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
+
+#endif /* ! CONFIG_ARM64_SVE */
+
/*
* Call __sve_free() directly only if you know task can't be scheduled
* or preempted.
@@ -270,6 +287,50 @@ static void task_fpsimd_save(void)
}
}
+/*
+ * Helpers to translate bit indices in sve_vq_map to VQ values (and
+ * vice versa). This allows find_next_bit() to be used to find the
+ * _maximum_ VQ not exceeding a certain value.
+ */
+
+static unsigned int vq_to_bit(unsigned int vq)
+{
+ return SVE_VQ_MAX - vq;
+}
+
+static unsigned int bit_to_vq(unsigned int bit)
+{
+ if (WARN_ON(bit >= SVE_VQ_MAX))
+ bit = SVE_VQ_MAX - 1;
+
+ return SVE_VQ_MAX - bit;
+}
+
+/*
+ * All vector length selection from userspace comes through here.
+ * We're on a slow path, so some sanity-checks are included.
+ * If things go wrong there's a bug somewhere, but try to fall back to a
+ * safe choice.
+ */
+static unsigned int find_supported_vector_length(unsigned int vl)
+{
+ int bit;
+ int max_vl = sve_max_vl;
+
+ if (WARN_ON(!sve_vl_valid(vl)))
+ vl = SVE_VL_MIN;
+
+ if (WARN_ON(!sve_vl_valid(max_vl)))
+ max_vl = SVE_VL_MIN;
+
+ if (vl > max_vl)
+ vl = max_vl;
+
+ bit = find_next_bit(sve_vq_map, SVE_VQ_MAX,
+ vq_to_bit(sve_vq_from_vl(vl)));
+ return sve_vl_from_vq(bit_to_vq(bit));
+}
+
#define ZREG(sve_state, vq, n) ((char *)(sve_state) + \
(SVE_SIG_ZREG_OFFSET(vq, n) - SVE_SIG_REGS_OFFSET))
@@ -364,6 +425,76 @@ void sve_alloc(struct task_struct *task)
BUG_ON(!task->thread.sve_state);
}
+int sve_set_vector_length(struct task_struct *task,
+ unsigned long vl, unsigned long flags)
+{
+ if (flags & ~(unsigned long)(PR_SVE_VL_INHERIT |
+ PR_SVE_SET_VL_ONEXEC))
+ return -EINVAL;
+
+ if (!sve_vl_valid(vl))
+ return -EINVAL;
+
+ /*
+ * Clamp to the maximum vector length that VL-agnostic SVE code can
+ * work with. A flag may be assigned in the future to allow setting
+ * of larger vector lengths without confusing older software.
+ */
+ if (vl > SVE_VL_ARCH_MAX)
+ vl = SVE_VL_ARCH_MAX;
+
+ vl = find_supported_vector_length(vl);
+
+ if (flags & (PR_SVE_VL_INHERIT |
+ PR_SVE_SET_VL_ONEXEC))
+ task->thread.sve_vl_onexec = vl;
+ else
+ /* Reset VL to system default on next exec: */
+ task->thread.sve_vl_onexec = 0;
+
+ /* Only actually set the VL if not deferred: */
+ if (flags & PR_SVE_SET_VL_ONEXEC)
+ goto out;
+
+ if (vl == task->thread.sve_vl)
+ goto out;
+
+ /*
+ * To ensure the FPSIMD bits of the SVE vector registers are preserved,
+ * write any live register state back to task_struct, and convert to a
+ * non-SVE thread.
+ */
+ if (task == current) {
+ local_bh_disable();
+
+ task_fpsimd_save();
+ set_thread_flag(TIF_FOREIGN_FPSTATE);
+ }
+
+ fpsimd_flush_task_state(task);
+ if (test_and_clear_tsk_thread_flag(task, TIF_SVE))
+ sve_to_fpsimd(task);
+
+ if (task == current)
+ local_bh_enable();
+
+ /*
+ * Force reallocation of task SVE state to the correct size
+ * on next use:
+ */
+ sve_free(task);
+
+ task->thread.sve_vl = vl;
+
+out:
+ if (flags & PR_SVE_VL_INHERIT)
+ set_tsk_thread_flag(task, TIF_SVE_VL_INHERIT);
+ else
+ clear_tsk_thread_flag(task, TIF_SVE_VL_INHERIT);
+
+ return 0;
+}
+
/*
* Called from the put_task_struct() path, which cannot get here
* unless dead_task is really dead and not schedulable.
@@ -480,7 +611,7 @@ void fpsimd_thread_switch(struct task_struct *next)
void fpsimd_flush_thread(void)
{
- int vl;
+ int vl, supported_vl;
if (!system_supports_fpsimd())
return;
@@ -508,6 +639,10 @@ void fpsimd_flush_thread(void)
if (WARN_ON(!sve_vl_valid(vl)))
vl = SVE_VL_MIN;
+ supported_vl = find_supported_vector_length(vl);
+ if (WARN_ON(supported_vl != vl))
+ vl = supported_vl;
+
current->thread.sve_vl = vl;
/*
diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h
index a8d0759..1b64901 100644
--- a/include/uapi/linux/prctl.h
+++ b/include/uapi/linux/prctl.h
@@ -197,4 +197,9 @@ struct prctl_mm_map {
# define PR_CAP_AMBIENT_LOWER 3
# define PR_CAP_AMBIENT_CLEAR_ALL 4
+/* arm64 Scalable Vector Extension controls */
+# define PR_SVE_SET_VL_ONEXEC (1 << 18) /* defer effect until exec */
+# define PR_SVE_VL_LEN_MASK 0xffff
+# define PR_SVE_VL_INHERIT (1 << 17) /* inherit across exec */
+
#endif /* _LINUX_PRCTL_H */
--
2.1.4
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 16/30] arm64/sve: Backend logic for setting the vector length
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
This patch implements the core logic for changing a task's vector
length on request from userspace. This will be used by the ptrace
and prctl frontends that are implemented in later patches.
The SVE architecture permits, but does not require, implementations
to support vector lengths that are not a power of two. To handle
this, logic is added to check a requested vector length against a
possibly sparse bitmap of available vector lengths at runtime, so
that the best supported value can be chosen.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
---
arch/arm64/include/asm/fpsimd.h | 8 +++
arch/arm64/kernel/fpsimd.c | 137 +++++++++++++++++++++++++++++++++++++++-
include/uapi/linux/prctl.h | 5 ++
3 files changed, 149 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index 9bbd74c..86f550c 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -20,6 +20,7 @@
#ifndef __ASSEMBLY__
+#include <linux/cache.h>
#include <linux/stddef.h>
/*
@@ -70,17 +71,24 @@ extern void fpsimd_update_current_state(struct fpsimd_state *state);
extern void fpsimd_flush_task_state(struct task_struct *target);
+/* Maximum VL that SVE VL-agnostic software can transparently support */
+#define SVE_VL_ARCH_MAX 0x100
+
extern void sve_save_state(void *state, u32 *pfpsr);
extern void sve_load_state(void const *state, u32 const *pfpsr,
unsigned long vq_minus_1);
extern unsigned int sve_get_vl(void);
+extern int __ro_after_init sve_max_vl;
+
#ifdef CONFIG_ARM64_SVE
extern size_t sve_state_size(struct task_struct const *task);
extern void sve_alloc(struct task_struct *task);
extern void fpsimd_release_task(struct task_struct *task);
+extern int sve_set_vector_length(struct task_struct *task,
+ unsigned long vl, unsigned long flags);
#else /* ! CONFIG_ARM64_SVE */
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index e0b5ef5..1ceb069 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -17,8 +17,10 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <linux/bitmap.h>
#include <linux/bottom_half.h>
#include <linux/bug.h>
+#include <linux/cache.h>
#include <linux/compat.h>
#include <linux/cpu.h>
#include <linux/cpu_pm.h>
@@ -28,6 +30,7 @@
#include <linux/init.h>
#include <linux/percpu.h>
#include <linux/preempt.h>
+#include <linux/prctl.h>
#include <linux/ptrace.h>
#include <linux/sched/signal.h>
#include <linux/signal.h>
@@ -113,6 +116,20 @@ static DEFINE_PER_CPU(struct fpsimd_state *, fpsimd_last_state);
/* Default VL for tasks that don't set it explicitly: */
static int sve_default_vl = SVE_VL_MIN;
+#ifdef CONFIG_ARM64_SVE
+
+/* Maximum supported vector length across all CPUs (initially poisoned) */
+int __ro_after_init sve_max_vl = -1;
+/* Set of available vector lengths, as vq_to_bit(vq): */
+static DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
+
+#else /* ! CONFIG_ARM64_SVE */
+
+/* Dummy declaration for code that will be optimised out: */
+extern DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
+
+#endif /* ! CONFIG_ARM64_SVE */
+
/*
* Call __sve_free() directly only if you know task can't be scheduled
* or preempted.
@@ -270,6 +287,50 @@ static void task_fpsimd_save(void)
}
}
+/*
+ * Helpers to translate bit indices in sve_vq_map to VQ values (and
+ * vice versa). This allows find_next_bit() to be used to find the
+ * _maximum_ VQ not exceeding a certain value.
+ */
+
+static unsigned int vq_to_bit(unsigned int vq)
+{
+ return SVE_VQ_MAX - vq;
+}
+
+static unsigned int bit_to_vq(unsigned int bit)
+{
+ if (WARN_ON(bit >= SVE_VQ_MAX))
+ bit = SVE_VQ_MAX - 1;
+
+ return SVE_VQ_MAX - bit;
+}
+
+/*
+ * All vector length selection from userspace comes through here.
+ * We're on a slow path, so some sanity-checks are included.
+ * If things go wrong there's a bug somewhere, but try to fall back to a
+ * safe choice.
+ */
+static unsigned int find_supported_vector_length(unsigned int vl)
+{
+ int bit;
+ int max_vl = sve_max_vl;
+
+ if (WARN_ON(!sve_vl_valid(vl)))
+ vl = SVE_VL_MIN;
+
+ if (WARN_ON(!sve_vl_valid(max_vl)))
+ max_vl = SVE_VL_MIN;
+
+ if (vl > max_vl)
+ vl = max_vl;
+
+ bit = find_next_bit(sve_vq_map, SVE_VQ_MAX,
+ vq_to_bit(sve_vq_from_vl(vl)));
+ return sve_vl_from_vq(bit_to_vq(bit));
+}
+
#define ZREG(sve_state, vq, n) ((char *)(sve_state) + \
(SVE_SIG_ZREG_OFFSET(vq, n) - SVE_SIG_REGS_OFFSET))
@@ -364,6 +425,76 @@ void sve_alloc(struct task_struct *task)
BUG_ON(!task->thread.sve_state);
}
+int sve_set_vector_length(struct task_struct *task,
+ unsigned long vl, unsigned long flags)
+{
+ if (flags & ~(unsigned long)(PR_SVE_VL_INHERIT |
+ PR_SVE_SET_VL_ONEXEC))
+ return -EINVAL;
+
+ if (!sve_vl_valid(vl))
+ return -EINVAL;
+
+ /*
+ * Clamp to the maximum vector length that VL-agnostic SVE code can
+ * work with. A flag may be assigned in the future to allow setting
+ * of larger vector lengths without confusing older software.
+ */
+ if (vl > SVE_VL_ARCH_MAX)
+ vl = SVE_VL_ARCH_MAX;
+
+ vl = find_supported_vector_length(vl);
+
+ if (flags & (PR_SVE_VL_INHERIT |
+ PR_SVE_SET_VL_ONEXEC))
+ task->thread.sve_vl_onexec = vl;
+ else
+ /* Reset VL to system default on next exec: */
+ task->thread.sve_vl_onexec = 0;
+
+ /* Only actually set the VL if not deferred: */
+ if (flags & PR_SVE_SET_VL_ONEXEC)
+ goto out;
+
+ if (vl == task->thread.sve_vl)
+ goto out;
+
+ /*
+ * To ensure the FPSIMD bits of the SVE vector registers are preserved,
+ * write any live register state back to task_struct, and convert to a
+ * non-SVE thread.
+ */
+ if (task == current) {
+ local_bh_disable();
+
+ task_fpsimd_save();
+ set_thread_flag(TIF_FOREIGN_FPSTATE);
+ }
+
+ fpsimd_flush_task_state(task);
+ if (test_and_clear_tsk_thread_flag(task, TIF_SVE))
+ sve_to_fpsimd(task);
+
+ if (task == current)
+ local_bh_enable();
+
+ /*
+ * Force reallocation of task SVE state to the correct size
+ * on next use:
+ */
+ sve_free(task);
+
+ task->thread.sve_vl = vl;
+
+out:
+ if (flags & PR_SVE_VL_INHERIT)
+ set_tsk_thread_flag(task, TIF_SVE_VL_INHERIT);
+ else
+ clear_tsk_thread_flag(task, TIF_SVE_VL_INHERIT);
+
+ return 0;
+}
+
/*
* Called from the put_task_struct() path, which cannot get here
* unless dead_task is really dead and not schedulable.
@@ -480,7 +611,7 @@ void fpsimd_thread_switch(struct task_struct *next)
void fpsimd_flush_thread(void)
{
- int vl;
+ int vl, supported_vl;
if (!system_supports_fpsimd())
return;
@@ -508,6 +639,10 @@ void fpsimd_flush_thread(void)
if (WARN_ON(!sve_vl_valid(vl)))
vl = SVE_VL_MIN;
+ supported_vl = find_supported_vector_length(vl);
+ if (WARN_ON(supported_vl != vl))
+ vl = supported_vl;
+
current->thread.sve_vl = vl;
/*
diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h
index a8d0759..1b64901 100644
--- a/include/uapi/linux/prctl.h
+++ b/include/uapi/linux/prctl.h
@@ -197,4 +197,9 @@ struct prctl_mm_map {
# define PR_CAP_AMBIENT_LOWER 3
# define PR_CAP_AMBIENT_CLEAR_ALL 4
+/* arm64 Scalable Vector Extension controls */
+# define PR_SVE_SET_VL_ONEXEC (1 << 18) /* defer effect until exec */
+# define PR_SVE_VL_LEN_MASK 0xffff
+# define PR_SVE_VL_INHERIT (1 << 17) /* inherit across exec */
+
#endif /* _LINUX_PRCTL_H */
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 16/30] arm64/sve: Backend logic for setting the vector length
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
This patch implements the core logic for changing a task's vector
length on request from userspace. This will be used by the ptrace
and prctl frontends that are implemented in later patches.
The SVE architecture permits, but does not require, implementations
to support vector lengths that are not a power of two. To handle
this, logic is added to check a requested vector length against a
possibly sparse bitmap of available vector lengths at runtime, so
that the best supported value can be chosen.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alex Benn?e <alex.bennee@linaro.org>
---
arch/arm64/include/asm/fpsimd.h | 8 +++
arch/arm64/kernel/fpsimd.c | 137 +++++++++++++++++++++++++++++++++++++++-
include/uapi/linux/prctl.h | 5 ++
3 files changed, 149 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index 9bbd74c..86f550c 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -20,6 +20,7 @@
#ifndef __ASSEMBLY__
+#include <linux/cache.h>
#include <linux/stddef.h>
/*
@@ -70,17 +71,24 @@ extern void fpsimd_update_current_state(struct fpsimd_state *state);
extern void fpsimd_flush_task_state(struct task_struct *target);
+/* Maximum VL that SVE VL-agnostic software can transparently support */
+#define SVE_VL_ARCH_MAX 0x100
+
extern void sve_save_state(void *state, u32 *pfpsr);
extern void sve_load_state(void const *state, u32 const *pfpsr,
unsigned long vq_minus_1);
extern unsigned int sve_get_vl(void);
+extern int __ro_after_init sve_max_vl;
+
#ifdef CONFIG_ARM64_SVE
extern size_t sve_state_size(struct task_struct const *task);
extern void sve_alloc(struct task_struct *task);
extern void fpsimd_release_task(struct task_struct *task);
+extern int sve_set_vector_length(struct task_struct *task,
+ unsigned long vl, unsigned long flags);
#else /* ! CONFIG_ARM64_SVE */
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index e0b5ef5..1ceb069 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -17,8 +17,10 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <linux/bitmap.h>
#include <linux/bottom_half.h>
#include <linux/bug.h>
+#include <linux/cache.h>
#include <linux/compat.h>
#include <linux/cpu.h>
#include <linux/cpu_pm.h>
@@ -28,6 +30,7 @@
#include <linux/init.h>
#include <linux/percpu.h>
#include <linux/preempt.h>
+#include <linux/prctl.h>
#include <linux/ptrace.h>
#include <linux/sched/signal.h>
#include <linux/signal.h>
@@ -113,6 +116,20 @@ static DEFINE_PER_CPU(struct fpsimd_state *, fpsimd_last_state);
/* Default VL for tasks that don't set it explicitly: */
static int sve_default_vl = SVE_VL_MIN;
+#ifdef CONFIG_ARM64_SVE
+
+/* Maximum supported vector length across all CPUs (initially poisoned) */
+int __ro_after_init sve_max_vl = -1;
+/* Set of available vector lengths, as vq_to_bit(vq): */
+static DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
+
+#else /* ! CONFIG_ARM64_SVE */
+
+/* Dummy declaration for code that will be optimised out: */
+extern DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
+
+#endif /* ! CONFIG_ARM64_SVE */
+
/*
* Call __sve_free() directly only if you know task can't be scheduled
* or preempted.
@@ -270,6 +287,50 @@ static void task_fpsimd_save(void)
}
}
+/*
+ * Helpers to translate bit indices in sve_vq_map to VQ values (and
+ * vice versa). This allows find_next_bit() to be used to find the
+ * _maximum_ VQ not exceeding a certain value.
+ */
+
+static unsigned int vq_to_bit(unsigned int vq)
+{
+ return SVE_VQ_MAX - vq;
+}
+
+static unsigned int bit_to_vq(unsigned int bit)
+{
+ if (WARN_ON(bit >= SVE_VQ_MAX))
+ bit = SVE_VQ_MAX - 1;
+
+ return SVE_VQ_MAX - bit;
+}
+
+/*
+ * All vector length selection from userspace comes through here.
+ * We're on a slow path, so some sanity-checks are included.
+ * If things go wrong there's a bug somewhere, but try to fall back to a
+ * safe choice.
+ */
+static unsigned int find_supported_vector_length(unsigned int vl)
+{
+ int bit;
+ int max_vl = sve_max_vl;
+
+ if (WARN_ON(!sve_vl_valid(vl)))
+ vl = SVE_VL_MIN;
+
+ if (WARN_ON(!sve_vl_valid(max_vl)))
+ max_vl = SVE_VL_MIN;
+
+ if (vl > max_vl)
+ vl = max_vl;
+
+ bit = find_next_bit(sve_vq_map, SVE_VQ_MAX,
+ vq_to_bit(sve_vq_from_vl(vl)));
+ return sve_vl_from_vq(bit_to_vq(bit));
+}
+
#define ZREG(sve_state, vq, n) ((char *)(sve_state) + \
(SVE_SIG_ZREG_OFFSET(vq, n) - SVE_SIG_REGS_OFFSET))
@@ -364,6 +425,76 @@ void sve_alloc(struct task_struct *task)
BUG_ON(!task->thread.sve_state);
}
+int sve_set_vector_length(struct task_struct *task,
+ unsigned long vl, unsigned long flags)
+{
+ if (flags & ~(unsigned long)(PR_SVE_VL_INHERIT |
+ PR_SVE_SET_VL_ONEXEC))
+ return -EINVAL;
+
+ if (!sve_vl_valid(vl))
+ return -EINVAL;
+
+ /*
+ * Clamp to the maximum vector length that VL-agnostic SVE code can
+ * work with. A flag may be assigned in the future to allow setting
+ * of larger vector lengths without confusing older software.
+ */
+ if (vl > SVE_VL_ARCH_MAX)
+ vl = SVE_VL_ARCH_MAX;
+
+ vl = find_supported_vector_length(vl);
+
+ if (flags & (PR_SVE_VL_INHERIT |
+ PR_SVE_SET_VL_ONEXEC))
+ task->thread.sve_vl_onexec = vl;
+ else
+ /* Reset VL to system default on next exec: */
+ task->thread.sve_vl_onexec = 0;
+
+ /* Only actually set the VL if not deferred: */
+ if (flags & PR_SVE_SET_VL_ONEXEC)
+ goto out;
+
+ if (vl == task->thread.sve_vl)
+ goto out;
+
+ /*
+ * To ensure the FPSIMD bits of the SVE vector registers are preserved,
+ * write any live register state back to task_struct, and convert to a
+ * non-SVE thread.
+ */
+ if (task == current) {
+ local_bh_disable();
+
+ task_fpsimd_save();
+ set_thread_flag(TIF_FOREIGN_FPSTATE);
+ }
+
+ fpsimd_flush_task_state(task);
+ if (test_and_clear_tsk_thread_flag(task, TIF_SVE))
+ sve_to_fpsimd(task);
+
+ if (task == current)
+ local_bh_enable();
+
+ /*
+ * Force reallocation of task SVE state to the correct size
+ * on next use:
+ */
+ sve_free(task);
+
+ task->thread.sve_vl = vl;
+
+out:
+ if (flags & PR_SVE_VL_INHERIT)
+ set_tsk_thread_flag(task, TIF_SVE_VL_INHERIT);
+ else
+ clear_tsk_thread_flag(task, TIF_SVE_VL_INHERIT);
+
+ return 0;
+}
+
/*
* Called from the put_task_struct() path, which cannot get here
* unless dead_task is really dead and not schedulable.
@@ -480,7 +611,7 @@ void fpsimd_thread_switch(struct task_struct *next)
void fpsimd_flush_thread(void)
{
- int vl;
+ int vl, supported_vl;
if (!system_supports_fpsimd())
return;
@@ -508,6 +639,10 @@ void fpsimd_flush_thread(void)
if (WARN_ON(!sve_vl_valid(vl)))
vl = SVE_VL_MIN;
+ supported_vl = find_supported_vector_length(vl);
+ if (WARN_ON(supported_vl != vl))
+ vl = supported_vl;
+
current->thread.sve_vl = vl;
/*
diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h
index a8d0759..1b64901 100644
--- a/include/uapi/linux/prctl.h
+++ b/include/uapi/linux/prctl.h
@@ -197,4 +197,9 @@ struct prctl_mm_map {
# define PR_CAP_AMBIENT_LOWER 3
# define PR_CAP_AMBIENT_CLEAR_ALL 4
+/* arm64 Scalable Vector Extension controls */
+# define PR_SVE_SET_VL_ONEXEC (1 << 18) /* defer effect until exec */
+# define PR_SVE_VL_LEN_MASK 0xffff
+# define PR_SVE_VL_INHERIT (1 << 17) /* inherit across exec */
+
#endif /* _LINUX_PRCTL_H */
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 17/30] arm64: cpufeature: Move sys_caps_initialised declarations
2017-10-31 15:50 ` Dave Martin
@ 2017-10-31 15:51 ` Dave Martin
-1 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
update_cpu_features() currently cannot tell whether it is being
called during early or late secondary boot. This doesn't
desperately matter for anything it currently does.
However, SVE will need to know here whether the set of available
vector lengths is known or still to be determined when booting a
CPU, so that it can be updated appropriately.
This patch simply moves the sys_caps_initialised stuff to the top
of the file so that it can be used more widely. There doesn't seem
to be a more obvious place to put it.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
---
arch/arm64/kernel/cpufeature.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index a011a5a..e226799 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -51,6 +51,21 @@ unsigned int compat_elf_hwcap2 __read_mostly;
DECLARE_BITMAP(cpu_hwcaps, ARM64_NCAPS);
EXPORT_SYMBOL(cpu_hwcaps);
+/*
+ * Flag to indicate if we have computed the system wide
+ * capabilities based on the boot time active CPUs. This
+ * will be used to determine if a new booting CPU should
+ * go through the verification process to make sure that it
+ * supports the system capabilities, without using a hotplug
+ * notifier.
+ */
+static bool sys_caps_initialised;
+
+static inline void set_sys_caps_initialised(void)
+{
+ sys_caps_initialised = true;
+}
+
static int dump_cpu_hwcaps(struct notifier_block *self, unsigned long v, void *p)
{
/* file-wide pr_fmt adds "CPU features: " prefix */
@@ -1050,21 +1065,6 @@ void __init enable_cpu_capabilities(const struct arm64_cpu_capabilities *caps)
}
/*
- * Flag to indicate if we have computed the system wide
- * capabilities based on the boot time active CPUs. This
- * will be used to determine if a new booting CPU should
- * go through the verification process to make sure that it
- * supports the system capabilities, without using a hotplug
- * notifier.
- */
-static bool sys_caps_initialised;
-
-static inline void set_sys_caps_initialised(void)
-{
- sys_caps_initialised = true;
-}
-
-/*
* Check for CPU features that are used in early boot
* based on the Boot CPU value.
*/
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 17/30] arm64: cpufeature: Move sys_caps_initialised declarations
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
update_cpu_features() currently cannot tell whether it is being
called during early or late secondary boot. This doesn't
desperately matter for anything it currently does.
However, SVE will need to know here whether the set of available
vector lengths is known or still to be determined when booting a
CPU, so that it can be updated appropriately.
This patch simply moves the sys_caps_initialised stuff to the top
of the file so that it can be used more widely. There doesn't seem
to be a more obvious place to put it.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
---
arch/arm64/kernel/cpufeature.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index a011a5a..e226799 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -51,6 +51,21 @@ unsigned int compat_elf_hwcap2 __read_mostly;
DECLARE_BITMAP(cpu_hwcaps, ARM64_NCAPS);
EXPORT_SYMBOL(cpu_hwcaps);
+/*
+ * Flag to indicate if we have computed the system wide
+ * capabilities based on the boot time active CPUs. This
+ * will be used to determine if a new booting CPU should
+ * go through the verification process to make sure that it
+ * supports the system capabilities, without using a hotplug
+ * notifier.
+ */
+static bool sys_caps_initialised;
+
+static inline void set_sys_caps_initialised(void)
+{
+ sys_caps_initialised = true;
+}
+
static int dump_cpu_hwcaps(struct notifier_block *self, unsigned long v, void *p)
{
/* file-wide pr_fmt adds "CPU features: " prefix */
@@ -1050,21 +1065,6 @@ void __init enable_cpu_capabilities(const struct arm64_cpu_capabilities *caps)
}
/*
- * Flag to indicate if we have computed the system wide
- * capabilities based on the boot time active CPUs. This
- * will be used to determine if a new booting CPU should
- * go through the verification process to make sure that it
- * supports the system capabilities, without using a hotplug
- * notifier.
- */
-static bool sys_caps_initialised;
-
-static inline void set_sys_caps_initialised(void)
-{
- sys_caps_initialised = true;
-}
-
-/*
* Check for CPU features that are used in early boot
* based on the Boot CPU value.
*/
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 18/30] arm64/sve: Probe SVE capabilities and usable vector lengths
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-arch, Okamoto Takayuki, libc-alpha, Ard Biesheuvel,
Szabolcs Nagy, Catalin Marinas, Will Deacon, kvmarm
This patch uses the cpufeatures framework to determine common SVE
capabilities and vector lengths, and configures the runtime SVE
support code appropriately.
ZCR_ELx is not really a feature register, but it is convenient to
use it as a template for recording the maximum vector length
supported by a CPU, using the LEN field. This field is similar to
a feature field in that it is a contiguous bitfield for which we
want to determine the minimum system-wide value. This patch adds
ZCR as a pseudo-register in cpuinfo/cpufeatures, with appropriate
custom code to populate it. Finding the minimum supported value of
the LEN field is left to the cpufeatures framework in the usual
way.
The meaning of ID_AA64ZFR0_EL1 is not architecturally defined yet,
so for now we just require it to be zero.
Note that much of this code is dormant and SVE still won't be used
yet, since system_supports_sve() remains hardwired to false.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
---
**Dropped at v3** Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
See v3 posting for history.
---
arch/arm64/include/asm/cpu.h | 4 ++
arch/arm64/include/asm/cpufeature.h | 36 ++++++++++++
arch/arm64/include/asm/fpsimd.h | 14 +++++
arch/arm64/kernel/cpufeature.c | 52 ++++++++++++++++
arch/arm64/kernel/cpuinfo.c | 6 ++
arch/arm64/kernel/fpsimd.c | 114 +++++++++++++++++++++++++++++++++++-
6 files changed, 223 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/include/asm/cpu.h b/arch/arm64/include/asm/cpu.h
index 889226b..8839227 100644
--- a/arch/arm64/include/asm/cpu.h
+++ b/arch/arm64/include/asm/cpu.h
@@ -41,6 +41,7 @@ struct cpuinfo_arm64 {
u64 reg_id_aa64mmfr2;
u64 reg_id_aa64pfr0;
u64 reg_id_aa64pfr1;
+ u64 reg_id_aa64zfr0;
u32 reg_id_dfr0;
u32 reg_id_isar0;
@@ -59,6 +60,9 @@ struct cpuinfo_arm64 {
u32 reg_mvfr0;
u32 reg_mvfr1;
u32 reg_mvfr2;
+
+ /* pseudo-ZCR for recording maximum ZCR_EL1 LEN value: */
+ u64 reg_zcr;
};
DECLARE_PER_CPU(struct cpuinfo_arm64, cpu_data);
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index 4ea3441..9b27e8c 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -10,7 +10,9 @@
#define __ASM_CPUFEATURE_H
#include <asm/cpucaps.h>
+#include <asm/fpsimd.h>
#include <asm/hwcap.h>
+#include <asm/sigcontext.h>
#include <asm/sysreg.h>
/*
@@ -223,6 +225,13 @@ static inline bool id_aa64pfr0_32bit_el0(u64 pfr0)
return val == ID_AA64PFR0_EL0_32BIT_64BIT;
}
+static inline bool id_aa64pfr0_sve(u64 pfr0)
+{
+ u32 val = cpuid_feature_extract_unsigned_field(pfr0, ID_AA64PFR0_SVE_SHIFT);
+
+ return val > 0;
+}
+
void __init setup_cpu_features(void);
void update_cpu_capabilities(const struct arm64_cpu_capabilities *caps,
@@ -267,6 +276,33 @@ static inline bool system_supports_sve(void)
return false;
}
+/*
+ * Read the pseudo-ZCR used by cpufeatures to identify the supported SVE
+ * vector length.
+ *
+ * Use only if SVE is present.
+ * This function clobbers the SVE vector length.
+ */
+static inline u64 read_zcr_features(void)
+{
+ u64 zcr;
+ unsigned int vq_max;
+
+ /*
+ * Set the maximum possible VL, and write zeroes to all other
+ * bits to see if they stick.
+ */
+ sve_kernel_enable(NULL);
+ write_sysreg_s(ZCR_ELx_LEN_MASK, SYS_ZCR_EL1);
+
+ zcr = read_sysreg_s(SYS_ZCR_EL1);
+ zcr &= ~(u64)ZCR_ELx_LEN_MASK; /* find sticky 1s outside LEN field */
+ vq_max = sve_vq_from_vl(sve_get_vl());
+ zcr |= vq_max - 1; /* set LEN field to maximum effective value */
+
+ return zcr;
+}
+
#endif /* __ASSEMBLY__ */
#endif
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index 86f550c..d8e0dc9 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -78,6 +78,7 @@ extern void sve_save_state(void *state, u32 *pfpsr);
extern void sve_load_state(void const *state, u32 const *pfpsr,
unsigned long vq_minus_1);
extern unsigned int sve_get_vl(void);
+extern int sve_kernel_enable(void *);
extern int __ro_after_init sve_max_vl;
@@ -90,10 +91,23 @@ extern void fpsimd_release_task(struct task_struct *task);
extern int sve_set_vector_length(struct task_struct *task,
unsigned long vl, unsigned long flags);
+/*
+ * Probing and setup functions.
+ * Calls to these functions must be serialised with one another.
+ */
+extern void __init sve_init_vq_map(void);
+extern void sve_update_vq_map(void);
+extern int sve_verify_vq_map(void);
+extern void __init sve_setup(void);
+
#else /* ! CONFIG_ARM64_SVE */
static inline void sve_alloc(struct task_struct *task) { }
static inline void fpsimd_release_task(struct task_struct *task) { }
+static inline void sve_init_vq_map(void) { }
+static inline void sve_update_vq_map(void) { }
+static inline int sve_verify_vq_map(void) { return 0; }
+static inline void sve_setup(void) { }
#endif /* ! CONFIG_ARM64_SVE */
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index e226799..2154373 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -27,6 +27,7 @@
#include <asm/cpu.h>
#include <asm/cpufeature.h>
#include <asm/cpu_ops.h>
+#include <asm/fpsimd.h>
#include <asm/mmu_context.h>
#include <asm/processor.h>
#include <asm/sysreg.h>
@@ -287,6 +288,12 @@ static const struct arm64_ftr_bits ftr_id_dfr0[] = {
ARM64_FTR_END,
};
+static const struct arm64_ftr_bits ftr_zcr[] = {
+ ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE,
+ ZCR_ELx_LEN_SHIFT, ZCR_ELx_LEN_SIZE, 0), /* LEN */
+ ARM64_FTR_END,
+};
+
/*
* Common ftr bits for a 32bit register with all hidden, strict
* attributes, with 4bit feature fields and a default safe value of
@@ -353,6 +360,7 @@ static const struct __ftr_reg_entry {
/* Op1 = 0, CRn = 0, CRm = 4 */
ARM64_FTR_REG(SYS_ID_AA64PFR0_EL1, ftr_id_aa64pfr0),
ARM64_FTR_REG(SYS_ID_AA64PFR1_EL1, ftr_raz),
+ ARM64_FTR_REG(SYS_ID_AA64ZFR0_EL1, ftr_raz),
/* Op1 = 0, CRn = 0, CRm = 5 */
ARM64_FTR_REG(SYS_ID_AA64DFR0_EL1, ftr_id_aa64dfr0),
@@ -367,6 +375,9 @@ static const struct __ftr_reg_entry {
ARM64_FTR_REG(SYS_ID_AA64MMFR1_EL1, ftr_id_aa64mmfr1),
ARM64_FTR_REG(SYS_ID_AA64MMFR2_EL1, ftr_id_aa64mmfr2),
+ /* Op1 = 0, CRn = 1, CRm = 2 */
+ ARM64_FTR_REG(SYS_ZCR_EL1, ftr_zcr),
+
/* Op1 = 3, CRn = 0, CRm = 0 */
{ SYS_CTR_EL0, &arm64_ftr_reg_ctrel0 },
ARM64_FTR_REG(SYS_DCZID_EL0, ftr_dczid),
@@ -504,6 +515,7 @@ void __init init_cpu_features(struct cpuinfo_arm64 *info)
init_cpu_ftr_reg(SYS_ID_AA64MMFR2_EL1, info->reg_id_aa64mmfr2);
init_cpu_ftr_reg(SYS_ID_AA64PFR0_EL1, info->reg_id_aa64pfr0);
init_cpu_ftr_reg(SYS_ID_AA64PFR1_EL1, info->reg_id_aa64pfr1);
+ init_cpu_ftr_reg(SYS_ID_AA64ZFR0_EL1, info->reg_id_aa64zfr0);
if (id_aa64pfr0_32bit_el0(info->reg_id_aa64pfr0)) {
init_cpu_ftr_reg(SYS_ID_DFR0_EL1, info->reg_id_dfr0);
@@ -524,6 +536,10 @@ void __init init_cpu_features(struct cpuinfo_arm64 *info)
init_cpu_ftr_reg(SYS_MVFR2_EL1, info->reg_mvfr2);
}
+ if (id_aa64pfr0_sve(info->reg_id_aa64pfr0)) {
+ init_cpu_ftr_reg(SYS_ZCR_EL1, info->reg_zcr);
+ sve_init_vq_map();
+ }
}
static void update_cpu_ftr_reg(struct arm64_ftr_reg *reg, u64 new)
@@ -627,6 +643,9 @@ void update_cpu_features(int cpu,
taint |= check_update_ftr_reg(SYS_ID_AA64PFR1_EL1, cpu,
info->reg_id_aa64pfr1, boot->reg_id_aa64pfr1);
+ taint |= check_update_ftr_reg(SYS_ID_AA64ZFR0_EL1, cpu,
+ info->reg_id_aa64zfr0, boot->reg_id_aa64zfr0);
+
/*
* If we have AArch32, we care about 32-bit features for compat.
* If the system doesn't support AArch32, don't update them.
@@ -674,6 +693,16 @@ void update_cpu_features(int cpu,
info->reg_mvfr2, boot->reg_mvfr2);
}
+ if (id_aa64pfr0_sve(info->reg_id_aa64pfr0)) {
+ taint |= check_update_ftr_reg(SYS_ZCR_EL1, cpu,
+ info->reg_zcr, boot->reg_zcr);
+
+ /* Probe vector lengths, unless we already gave up on SVE */
+ if (id_aa64pfr0_sve(read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1)) &&
+ !sys_caps_initialised)
+ sve_update_vq_map();
+ }
+
/*
* Mismatched CPU features are a recipe for disaster. Don't even
* pretend to support them.
@@ -1106,6 +1135,23 @@ verify_local_cpu_features(const struct arm64_cpu_capabilities *caps)
}
}
+static void verify_sve_features(void)
+{
+ u64 safe_zcr = read_sanitised_ftr_reg(SYS_ZCR_EL1);
+ u64 zcr = read_zcr_features();
+
+ unsigned int safe_len = safe_zcr & ZCR_ELx_LEN_MASK;
+ unsigned int len = zcr & ZCR_ELx_LEN_MASK;
+
+ if (len < safe_len || sve_verify_vq_map()) {
+ pr_crit("CPU%d: SVE: required vector length(s) missing\n",
+ smp_processor_id());
+ cpu_die_early();
+ }
+
+ /* Add checks on other ZCR bits here if necessary */
+}
+
/*
* Run through the enabled system capabilities and enable() it on this CPU.
* The capabilities were decided based on the available CPUs at the boot time.
@@ -1119,8 +1165,12 @@ static void verify_local_cpu_capabilities(void)
verify_local_cpu_errata_workarounds();
verify_local_cpu_features(arm64_features);
verify_local_elf_hwcaps(arm64_elf_hwcaps);
+
if (system_supports_32bit_el0())
verify_local_elf_hwcaps(compat_elf_hwcaps);
+
+ if (system_supports_sve())
+ verify_sve_features();
}
void check_local_cpu_capabilities(void)
@@ -1198,6 +1248,8 @@ void __init setup_cpu_features(void)
if (system_supports_32bit_el0())
setup_elf_hwcaps(compat_elf_hwcaps);
+ sve_setup();
+
/* Advertise that we have computed the system capabilities */
set_sys_caps_initialised();
diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c
index 1ff1c5a..58da504 100644
--- a/arch/arm64/kernel/cpuinfo.c
+++ b/arch/arm64/kernel/cpuinfo.c
@@ -19,6 +19,7 @@
#include <asm/cpu.h>
#include <asm/cputype.h>
#include <asm/cpufeature.h>
+#include <asm/fpsimd.h>
#include <linux/bitops.h>
#include <linux/bug.h>
@@ -331,6 +332,7 @@ static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info)
info->reg_id_aa64mmfr2 = read_cpuid(ID_AA64MMFR2_EL1);
info->reg_id_aa64pfr0 = read_cpuid(ID_AA64PFR0_EL1);
info->reg_id_aa64pfr1 = read_cpuid(ID_AA64PFR1_EL1);
+ info->reg_id_aa64zfr0 = read_cpuid(ID_AA64ZFR0_EL1);
/* Update the 32bit ID registers only if AArch32 is implemented */
if (id_aa64pfr0_32bit_el0(info->reg_id_aa64pfr0)) {
@@ -353,6 +355,10 @@ static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info)
info->reg_mvfr2 = read_cpuid(MVFR2_EL1);
}
+ if (IS_ENABLED(CONFIG_ARM64_SVE) &&
+ id_aa64pfr0_sve(info->reg_id_aa64pfr0))
+ info->reg_zcr = read_zcr_features();
+
cpuinfo_detect_icache_policy(info);
}
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 1ceb069..c112972 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -114,19 +114,19 @@
static DEFINE_PER_CPU(struct fpsimd_state *, fpsimd_last_state);
/* Default VL for tasks that don't set it explicitly: */
-static int sve_default_vl = SVE_VL_MIN;
+static int sve_default_vl = -1;
#ifdef CONFIG_ARM64_SVE
/* Maximum supported vector length across all CPUs (initially poisoned) */
int __ro_after_init sve_max_vl = -1;
/* Set of available vector lengths, as vq_to_bit(vq): */
-static DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
+static __ro_after_init DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
#else /* ! CONFIG_ARM64_SVE */
/* Dummy declaration for code that will be optimised out: */
-extern DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
+extern __ro_after_init DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
#endif /* ! CONFIG_ARM64_SVE */
@@ -496,6 +496,111 @@ int sve_set_vector_length(struct task_struct *task,
}
/*
+ * Bitmap for temporary storage of the per-CPU set of supported vector lengths
+ * during secondary boot.
+ */
+static DECLARE_BITMAP(sve_secondary_vq_map, SVE_VQ_MAX);
+
+static void sve_probe_vqs(DECLARE_BITMAP(map, SVE_VQ_MAX))
+{
+ unsigned int vq, vl;
+ unsigned long zcr;
+
+ bitmap_zero(map, SVE_VQ_MAX);
+
+ zcr = ZCR_ELx_LEN_MASK;
+ zcr = read_sysreg_s(SYS_ZCR_EL1) & ~zcr;
+
+ for (vq = SVE_VQ_MAX; vq >= SVE_VQ_MIN; --vq) {
+ write_sysreg_s(zcr | (vq - 1), SYS_ZCR_EL1); /* self-syncing */
+ vl = sve_get_vl();
+ vq = sve_vq_from_vl(vl); /* skip intervening lengths */
+ set_bit(vq_to_bit(vq), map);
+ }
+}
+
+void __init sve_init_vq_map(void)
+{
+ sve_probe_vqs(sve_vq_map);
+}
+
+/*
+ * If we haven't committed to the set of supported VQs yet, filter out
+ * those not supported by the current CPU.
+ */
+void sve_update_vq_map(void)
+{
+ sve_probe_vqs(sve_secondary_vq_map);
+ bitmap_and(sve_vq_map, sve_vq_map, sve_secondary_vq_map, SVE_VQ_MAX);
+}
+
+/* Check whether the current CPU supports all VQs in the committed set */
+int sve_verify_vq_map(void)
+{
+ int ret = 0;
+
+ sve_probe_vqs(sve_secondary_vq_map);
+ bitmap_andnot(sve_secondary_vq_map, sve_vq_map, sve_secondary_vq_map,
+ SVE_VQ_MAX);
+ if (!bitmap_empty(sve_secondary_vq_map, SVE_VQ_MAX)) {
+ pr_warn("SVE: cpu%d: Required vector length(s) missing\n",
+ smp_processor_id());
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+/*
+ * Enable SVE for EL1.
+ * Intended for use by the cpufeatures code during CPU boot.
+ */
+int sve_kernel_enable(void *__always_unused p)
+{
+ write_sysreg(read_sysreg(CPACR_EL1) | CPACR_EL1_ZEN_EL1EN, CPACR_EL1);
+ isb();
+
+ return 0;
+}
+
+void __init sve_setup(void)
+{
+ u64 zcr;
+
+ if (!system_supports_sve())
+ return;
+
+ /*
+ * The SVE architecture mandates support for 128-bit vectors,
+ * so sve_vq_map must have at least SVE_VQ_MIN set.
+ * If something went wrong, at least try to patch it up:
+ */
+ if (WARN_ON(!test_bit(vq_to_bit(SVE_VQ_MIN), sve_vq_map)))
+ set_bit(vq_to_bit(SVE_VQ_MIN), sve_vq_map);
+
+ zcr = read_sanitised_ftr_reg(SYS_ZCR_EL1);
+ sve_max_vl = sve_vl_from_vq((zcr & ZCR_ELx_LEN_MASK) + 1);
+
+ /*
+ * Sanity-check that the max VL we determined through CPU features
+ * corresponds properly to sve_vq_map. If not, do our best:
+ */
+ if (WARN_ON(sve_max_vl != find_supported_vector_length(sve_max_vl)))
+ sve_max_vl = find_supported_vector_length(sve_max_vl);
+
+ /*
+ * For the default VL, pick the maximum supported value <= 64.
+ * VL == 64 is guaranteed not to grow the signal frame.
+ */
+ sve_default_vl = find_supported_vector_length(64);
+
+ pr_info("SVE: maximum available vector length %u bytes per vector\n",
+ sve_max_vl);
+ pr_info("SVE: default vector length %u bytes per vector\n",
+ sve_default_vl);
+}
+
+/*
* Called from the put_task_struct() path, which cannot get here
* unless dead_task is really dead and not schedulable.
*/
@@ -630,6 +735,9 @@ void fpsimd_flush_thread(void)
* This is where we ensure that all user tasks have a valid
* vector length configured: no kernel task can become a user
* task without an exec and hence a call to this function.
+ * By the time the first call to this function is made, all
+ * early hardware probing is complete, so sve_default_vl
+ * should be valid.
* If a bug causes this to go wrong, we make some noise and
* try to fudge thread.sve_vl to a safe value here.
*/
--
2.1.4
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 18/30] arm64/sve: Probe SVE capabilities and usable vector lengths
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
This patch uses the cpufeatures framework to determine common SVE
capabilities and vector lengths, and configures the runtime SVE
support code appropriately.
ZCR_ELx is not really a feature register, but it is convenient to
use it as a template for recording the maximum vector length
supported by a CPU, using the LEN field. This field is similar to
a feature field in that it is a contiguous bitfield for which we
want to determine the minimum system-wide value. This patch adds
ZCR as a pseudo-register in cpuinfo/cpufeatures, with appropriate
custom code to populate it. Finding the minimum supported value of
the LEN field is left to the cpufeatures framework in the usual
way.
The meaning of ID_AA64ZFR0_EL1 is not architecturally defined yet,
so for now we just require it to be zero.
Note that much of this code is dormant and SVE still won't be used
yet, since system_supports_sve() remains hardwired to false.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
---
**Dropped at v3** Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
See v3 posting for history.
---
arch/arm64/include/asm/cpu.h | 4 ++
arch/arm64/include/asm/cpufeature.h | 36 ++++++++++++
arch/arm64/include/asm/fpsimd.h | 14 +++++
arch/arm64/kernel/cpufeature.c | 52 ++++++++++++++++
arch/arm64/kernel/cpuinfo.c | 6 ++
arch/arm64/kernel/fpsimd.c | 114 +++++++++++++++++++++++++++++++++++-
6 files changed, 223 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/include/asm/cpu.h b/arch/arm64/include/asm/cpu.h
index 889226b..8839227 100644
--- a/arch/arm64/include/asm/cpu.h
+++ b/arch/arm64/include/asm/cpu.h
@@ -41,6 +41,7 @@ struct cpuinfo_arm64 {
u64 reg_id_aa64mmfr2;
u64 reg_id_aa64pfr0;
u64 reg_id_aa64pfr1;
+ u64 reg_id_aa64zfr0;
u32 reg_id_dfr0;
u32 reg_id_isar0;
@@ -59,6 +60,9 @@ struct cpuinfo_arm64 {
u32 reg_mvfr0;
u32 reg_mvfr1;
u32 reg_mvfr2;
+
+ /* pseudo-ZCR for recording maximum ZCR_EL1 LEN value: */
+ u64 reg_zcr;
};
DECLARE_PER_CPU(struct cpuinfo_arm64, cpu_data);
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index 4ea3441..9b27e8c 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -10,7 +10,9 @@
#define __ASM_CPUFEATURE_H
#include <asm/cpucaps.h>
+#include <asm/fpsimd.h>
#include <asm/hwcap.h>
+#include <asm/sigcontext.h>
#include <asm/sysreg.h>
/*
@@ -223,6 +225,13 @@ static inline bool id_aa64pfr0_32bit_el0(u64 pfr0)
return val == ID_AA64PFR0_EL0_32BIT_64BIT;
}
+static inline bool id_aa64pfr0_sve(u64 pfr0)
+{
+ u32 val = cpuid_feature_extract_unsigned_field(pfr0, ID_AA64PFR0_SVE_SHIFT);
+
+ return val > 0;
+}
+
void __init setup_cpu_features(void);
void update_cpu_capabilities(const struct arm64_cpu_capabilities *caps,
@@ -267,6 +276,33 @@ static inline bool system_supports_sve(void)
return false;
}
+/*
+ * Read the pseudo-ZCR used by cpufeatures to identify the supported SVE
+ * vector length.
+ *
+ * Use only if SVE is present.
+ * This function clobbers the SVE vector length.
+ */
+static inline u64 read_zcr_features(void)
+{
+ u64 zcr;
+ unsigned int vq_max;
+
+ /*
+ * Set the maximum possible VL, and write zeroes to all other
+ * bits to see if they stick.
+ */
+ sve_kernel_enable(NULL);
+ write_sysreg_s(ZCR_ELx_LEN_MASK, SYS_ZCR_EL1);
+
+ zcr = read_sysreg_s(SYS_ZCR_EL1);
+ zcr &= ~(u64)ZCR_ELx_LEN_MASK; /* find sticky 1s outside LEN field */
+ vq_max = sve_vq_from_vl(sve_get_vl());
+ zcr |= vq_max - 1; /* set LEN field to maximum effective value */
+
+ return zcr;
+}
+
#endif /* __ASSEMBLY__ */
#endif
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index 86f550c..d8e0dc9 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -78,6 +78,7 @@ extern void sve_save_state(void *state, u32 *pfpsr);
extern void sve_load_state(void const *state, u32 const *pfpsr,
unsigned long vq_minus_1);
extern unsigned int sve_get_vl(void);
+extern int sve_kernel_enable(void *);
extern int __ro_after_init sve_max_vl;
@@ -90,10 +91,23 @@ extern void fpsimd_release_task(struct task_struct *task);
extern int sve_set_vector_length(struct task_struct *task,
unsigned long vl, unsigned long flags);
+/*
+ * Probing and setup functions.
+ * Calls to these functions must be serialised with one another.
+ */
+extern void __init sve_init_vq_map(void);
+extern void sve_update_vq_map(void);
+extern int sve_verify_vq_map(void);
+extern void __init sve_setup(void);
+
#else /* ! CONFIG_ARM64_SVE */
static inline void sve_alloc(struct task_struct *task) { }
static inline void fpsimd_release_task(struct task_struct *task) { }
+static inline void sve_init_vq_map(void) { }
+static inline void sve_update_vq_map(void) { }
+static inline int sve_verify_vq_map(void) { return 0; }
+static inline void sve_setup(void) { }
#endif /* ! CONFIG_ARM64_SVE */
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index e226799..2154373 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -27,6 +27,7 @@
#include <asm/cpu.h>
#include <asm/cpufeature.h>
#include <asm/cpu_ops.h>
+#include <asm/fpsimd.h>
#include <asm/mmu_context.h>
#include <asm/processor.h>
#include <asm/sysreg.h>
@@ -287,6 +288,12 @@ static const struct arm64_ftr_bits ftr_id_dfr0[] = {
ARM64_FTR_END,
};
+static const struct arm64_ftr_bits ftr_zcr[] = {
+ ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE,
+ ZCR_ELx_LEN_SHIFT, ZCR_ELx_LEN_SIZE, 0), /* LEN */
+ ARM64_FTR_END,
+};
+
/*
* Common ftr bits for a 32bit register with all hidden, strict
* attributes, with 4bit feature fields and a default safe value of
@@ -353,6 +360,7 @@ static const struct __ftr_reg_entry {
/* Op1 = 0, CRn = 0, CRm = 4 */
ARM64_FTR_REG(SYS_ID_AA64PFR0_EL1, ftr_id_aa64pfr0),
ARM64_FTR_REG(SYS_ID_AA64PFR1_EL1, ftr_raz),
+ ARM64_FTR_REG(SYS_ID_AA64ZFR0_EL1, ftr_raz),
/* Op1 = 0, CRn = 0, CRm = 5 */
ARM64_FTR_REG(SYS_ID_AA64DFR0_EL1, ftr_id_aa64dfr0),
@@ -367,6 +375,9 @@ static const struct __ftr_reg_entry {
ARM64_FTR_REG(SYS_ID_AA64MMFR1_EL1, ftr_id_aa64mmfr1),
ARM64_FTR_REG(SYS_ID_AA64MMFR2_EL1, ftr_id_aa64mmfr2),
+ /* Op1 = 0, CRn = 1, CRm = 2 */
+ ARM64_FTR_REG(SYS_ZCR_EL1, ftr_zcr),
+
/* Op1 = 3, CRn = 0, CRm = 0 */
{ SYS_CTR_EL0, &arm64_ftr_reg_ctrel0 },
ARM64_FTR_REG(SYS_DCZID_EL0, ftr_dczid),
@@ -504,6 +515,7 @@ void __init init_cpu_features(struct cpuinfo_arm64 *info)
init_cpu_ftr_reg(SYS_ID_AA64MMFR2_EL1, info->reg_id_aa64mmfr2);
init_cpu_ftr_reg(SYS_ID_AA64PFR0_EL1, info->reg_id_aa64pfr0);
init_cpu_ftr_reg(SYS_ID_AA64PFR1_EL1, info->reg_id_aa64pfr1);
+ init_cpu_ftr_reg(SYS_ID_AA64ZFR0_EL1, info->reg_id_aa64zfr0);
if (id_aa64pfr0_32bit_el0(info->reg_id_aa64pfr0)) {
init_cpu_ftr_reg(SYS_ID_DFR0_EL1, info->reg_id_dfr0);
@@ -524,6 +536,10 @@ void __init init_cpu_features(struct cpuinfo_arm64 *info)
init_cpu_ftr_reg(SYS_MVFR2_EL1, info->reg_mvfr2);
}
+ if (id_aa64pfr0_sve(info->reg_id_aa64pfr0)) {
+ init_cpu_ftr_reg(SYS_ZCR_EL1, info->reg_zcr);
+ sve_init_vq_map();
+ }
}
static void update_cpu_ftr_reg(struct arm64_ftr_reg *reg, u64 new)
@@ -627,6 +643,9 @@ void update_cpu_features(int cpu,
taint |= check_update_ftr_reg(SYS_ID_AA64PFR1_EL1, cpu,
info->reg_id_aa64pfr1, boot->reg_id_aa64pfr1);
+ taint |= check_update_ftr_reg(SYS_ID_AA64ZFR0_EL1, cpu,
+ info->reg_id_aa64zfr0, boot->reg_id_aa64zfr0);
+
/*
* If we have AArch32, we care about 32-bit features for compat.
* If the system doesn't support AArch32, don't update them.
@@ -674,6 +693,16 @@ void update_cpu_features(int cpu,
info->reg_mvfr2, boot->reg_mvfr2);
}
+ if (id_aa64pfr0_sve(info->reg_id_aa64pfr0)) {
+ taint |= check_update_ftr_reg(SYS_ZCR_EL1, cpu,
+ info->reg_zcr, boot->reg_zcr);
+
+ /* Probe vector lengths, unless we already gave up on SVE */
+ if (id_aa64pfr0_sve(read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1)) &&
+ !sys_caps_initialised)
+ sve_update_vq_map();
+ }
+
/*
* Mismatched CPU features are a recipe for disaster. Don't even
* pretend to support them.
@@ -1106,6 +1135,23 @@ verify_local_cpu_features(const struct arm64_cpu_capabilities *caps)
}
}
+static void verify_sve_features(void)
+{
+ u64 safe_zcr = read_sanitised_ftr_reg(SYS_ZCR_EL1);
+ u64 zcr = read_zcr_features();
+
+ unsigned int safe_len = safe_zcr & ZCR_ELx_LEN_MASK;
+ unsigned int len = zcr & ZCR_ELx_LEN_MASK;
+
+ if (len < safe_len || sve_verify_vq_map()) {
+ pr_crit("CPU%d: SVE: required vector length(s) missing\n",
+ smp_processor_id());
+ cpu_die_early();
+ }
+
+ /* Add checks on other ZCR bits here if necessary */
+}
+
/*
* Run through the enabled system capabilities and enable() it on this CPU.
* The capabilities were decided based on the available CPUs at the boot time.
@@ -1119,8 +1165,12 @@ static void verify_local_cpu_capabilities(void)
verify_local_cpu_errata_workarounds();
verify_local_cpu_features(arm64_features);
verify_local_elf_hwcaps(arm64_elf_hwcaps);
+
if (system_supports_32bit_el0())
verify_local_elf_hwcaps(compat_elf_hwcaps);
+
+ if (system_supports_sve())
+ verify_sve_features();
}
void check_local_cpu_capabilities(void)
@@ -1198,6 +1248,8 @@ void __init setup_cpu_features(void)
if (system_supports_32bit_el0())
setup_elf_hwcaps(compat_elf_hwcaps);
+ sve_setup();
+
/* Advertise that we have computed the system capabilities */
set_sys_caps_initialised();
diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c
index 1ff1c5a..58da504 100644
--- a/arch/arm64/kernel/cpuinfo.c
+++ b/arch/arm64/kernel/cpuinfo.c
@@ -19,6 +19,7 @@
#include <asm/cpu.h>
#include <asm/cputype.h>
#include <asm/cpufeature.h>
+#include <asm/fpsimd.h>
#include <linux/bitops.h>
#include <linux/bug.h>
@@ -331,6 +332,7 @@ static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info)
info->reg_id_aa64mmfr2 = read_cpuid(ID_AA64MMFR2_EL1);
info->reg_id_aa64pfr0 = read_cpuid(ID_AA64PFR0_EL1);
info->reg_id_aa64pfr1 = read_cpuid(ID_AA64PFR1_EL1);
+ info->reg_id_aa64zfr0 = read_cpuid(ID_AA64ZFR0_EL1);
/* Update the 32bit ID registers only if AArch32 is implemented */
if (id_aa64pfr0_32bit_el0(info->reg_id_aa64pfr0)) {
@@ -353,6 +355,10 @@ static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info)
info->reg_mvfr2 = read_cpuid(MVFR2_EL1);
}
+ if (IS_ENABLED(CONFIG_ARM64_SVE) &&
+ id_aa64pfr0_sve(info->reg_id_aa64pfr0))
+ info->reg_zcr = read_zcr_features();
+
cpuinfo_detect_icache_policy(info);
}
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 1ceb069..c112972 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -114,19 +114,19 @@
static DEFINE_PER_CPU(struct fpsimd_state *, fpsimd_last_state);
/* Default VL for tasks that don't set it explicitly: */
-static int sve_default_vl = SVE_VL_MIN;
+static int sve_default_vl = -1;
#ifdef CONFIG_ARM64_SVE
/* Maximum supported vector length across all CPUs (initially poisoned) */
int __ro_after_init sve_max_vl = -1;
/* Set of available vector lengths, as vq_to_bit(vq): */
-static DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
+static __ro_after_init DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
#else /* ! CONFIG_ARM64_SVE */
/* Dummy declaration for code that will be optimised out: */
-extern DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
+extern __ro_after_init DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
#endif /* ! CONFIG_ARM64_SVE */
@@ -496,6 +496,111 @@ int sve_set_vector_length(struct task_struct *task,
}
/*
+ * Bitmap for temporary storage of the per-CPU set of supported vector lengths
+ * during secondary boot.
+ */
+static DECLARE_BITMAP(sve_secondary_vq_map, SVE_VQ_MAX);
+
+static void sve_probe_vqs(DECLARE_BITMAP(map, SVE_VQ_MAX))
+{
+ unsigned int vq, vl;
+ unsigned long zcr;
+
+ bitmap_zero(map, SVE_VQ_MAX);
+
+ zcr = ZCR_ELx_LEN_MASK;
+ zcr = read_sysreg_s(SYS_ZCR_EL1) & ~zcr;
+
+ for (vq = SVE_VQ_MAX; vq >= SVE_VQ_MIN; --vq) {
+ write_sysreg_s(zcr | (vq - 1), SYS_ZCR_EL1); /* self-syncing */
+ vl = sve_get_vl();
+ vq = sve_vq_from_vl(vl); /* skip intervening lengths */
+ set_bit(vq_to_bit(vq), map);
+ }
+}
+
+void __init sve_init_vq_map(void)
+{
+ sve_probe_vqs(sve_vq_map);
+}
+
+/*
+ * If we haven't committed to the set of supported VQs yet, filter out
+ * those not supported by the current CPU.
+ */
+void sve_update_vq_map(void)
+{
+ sve_probe_vqs(sve_secondary_vq_map);
+ bitmap_and(sve_vq_map, sve_vq_map, sve_secondary_vq_map, SVE_VQ_MAX);
+}
+
+/* Check whether the current CPU supports all VQs in the committed set */
+int sve_verify_vq_map(void)
+{
+ int ret = 0;
+
+ sve_probe_vqs(sve_secondary_vq_map);
+ bitmap_andnot(sve_secondary_vq_map, sve_vq_map, sve_secondary_vq_map,
+ SVE_VQ_MAX);
+ if (!bitmap_empty(sve_secondary_vq_map, SVE_VQ_MAX)) {
+ pr_warn("SVE: cpu%d: Required vector length(s) missing\n",
+ smp_processor_id());
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+/*
+ * Enable SVE for EL1.
+ * Intended for use by the cpufeatures code during CPU boot.
+ */
+int sve_kernel_enable(void *__always_unused p)
+{
+ write_sysreg(read_sysreg(CPACR_EL1) | CPACR_EL1_ZEN_EL1EN, CPACR_EL1);
+ isb();
+
+ return 0;
+}
+
+void __init sve_setup(void)
+{
+ u64 zcr;
+
+ if (!system_supports_sve())
+ return;
+
+ /*
+ * The SVE architecture mandates support for 128-bit vectors,
+ * so sve_vq_map must have at least SVE_VQ_MIN set.
+ * If something went wrong, at least try to patch it up:
+ */
+ if (WARN_ON(!test_bit(vq_to_bit(SVE_VQ_MIN), sve_vq_map)))
+ set_bit(vq_to_bit(SVE_VQ_MIN), sve_vq_map);
+
+ zcr = read_sanitised_ftr_reg(SYS_ZCR_EL1);
+ sve_max_vl = sve_vl_from_vq((zcr & ZCR_ELx_LEN_MASK) + 1);
+
+ /*
+ * Sanity-check that the max VL we determined through CPU features
+ * corresponds properly to sve_vq_map. If not, do our best:
+ */
+ if (WARN_ON(sve_max_vl != find_supported_vector_length(sve_max_vl)))
+ sve_max_vl = find_supported_vector_length(sve_max_vl);
+
+ /*
+ * For the default VL, pick the maximum supported value <= 64.
+ * VL == 64 is guaranteed not to grow the signal frame.
+ */
+ sve_default_vl = find_supported_vector_length(64);
+
+ pr_info("SVE: maximum available vector length %u bytes per vector\n",
+ sve_max_vl);
+ pr_info("SVE: default vector length %u bytes per vector\n",
+ sve_default_vl);
+}
+
+/*
* Called from the put_task_struct() path, which cannot get here
* unless dead_task is really dead and not schedulable.
*/
@@ -630,6 +735,9 @@ void fpsimd_flush_thread(void)
* This is where we ensure that all user tasks have a valid
* vector length configured: no kernel task can become a user
* task without an exec and hence a call to this function.
+ * By the time the first call to this function is made, all
+ * early hardware probing is complete, so sve_default_vl
+ * should be valid.
* If a bug causes this to go wrong, we make some noise and
* try to fudge thread.sve_vl to a safe value here.
*/
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 18/30] arm64/sve: Probe SVE capabilities and usable vector lengths
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
This patch uses the cpufeatures framework to determine common SVE
capabilities and vector lengths, and configures the runtime SVE
support code appropriately.
ZCR_ELx is not really a feature register, but it is convenient to
use it as a template for recording the maximum vector length
supported by a CPU, using the LEN field. This field is similar to
a feature field in that it is a contiguous bitfield for which we
want to determine the minimum system-wide value. This patch adds
ZCR as a pseudo-register in cpuinfo/cpufeatures, with appropriate
custom code to populate it. Finding the minimum supported value of
the LEN field is left to the cpufeatures framework in the usual
way.
The meaning of ID_AA64ZFR0_EL1 is not architecturally defined yet,
so for now we just require it to be zero.
Note that much of this code is dormant and SVE still won't be used
yet, since system_supports_sve() remains hardwired to false.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alex Benn?e <alex.bennee@linaro.org>
---
**Dropped at v3** Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
See v3 posting for history.
---
arch/arm64/include/asm/cpu.h | 4 ++
arch/arm64/include/asm/cpufeature.h | 36 ++++++++++++
arch/arm64/include/asm/fpsimd.h | 14 +++++
arch/arm64/kernel/cpufeature.c | 52 ++++++++++++++++
arch/arm64/kernel/cpuinfo.c | 6 ++
arch/arm64/kernel/fpsimd.c | 114 +++++++++++++++++++++++++++++++++++-
6 files changed, 223 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/include/asm/cpu.h b/arch/arm64/include/asm/cpu.h
index 889226b..8839227 100644
--- a/arch/arm64/include/asm/cpu.h
+++ b/arch/arm64/include/asm/cpu.h
@@ -41,6 +41,7 @@ struct cpuinfo_arm64 {
u64 reg_id_aa64mmfr2;
u64 reg_id_aa64pfr0;
u64 reg_id_aa64pfr1;
+ u64 reg_id_aa64zfr0;
u32 reg_id_dfr0;
u32 reg_id_isar0;
@@ -59,6 +60,9 @@ struct cpuinfo_arm64 {
u32 reg_mvfr0;
u32 reg_mvfr1;
u32 reg_mvfr2;
+
+ /* pseudo-ZCR for recording maximum ZCR_EL1 LEN value: */
+ u64 reg_zcr;
};
DECLARE_PER_CPU(struct cpuinfo_arm64, cpu_data);
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index 4ea3441..9b27e8c 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -10,7 +10,9 @@
#define __ASM_CPUFEATURE_H
#include <asm/cpucaps.h>
+#include <asm/fpsimd.h>
#include <asm/hwcap.h>
+#include <asm/sigcontext.h>
#include <asm/sysreg.h>
/*
@@ -223,6 +225,13 @@ static inline bool id_aa64pfr0_32bit_el0(u64 pfr0)
return val == ID_AA64PFR0_EL0_32BIT_64BIT;
}
+static inline bool id_aa64pfr0_sve(u64 pfr0)
+{
+ u32 val = cpuid_feature_extract_unsigned_field(pfr0, ID_AA64PFR0_SVE_SHIFT);
+
+ return val > 0;
+}
+
void __init setup_cpu_features(void);
void update_cpu_capabilities(const struct arm64_cpu_capabilities *caps,
@@ -267,6 +276,33 @@ static inline bool system_supports_sve(void)
return false;
}
+/*
+ * Read the pseudo-ZCR used by cpufeatures to identify the supported SVE
+ * vector length.
+ *
+ * Use only if SVE is present.
+ * This function clobbers the SVE vector length.
+ */
+static inline u64 read_zcr_features(void)
+{
+ u64 zcr;
+ unsigned int vq_max;
+
+ /*
+ * Set the maximum possible VL, and write zeroes to all other
+ * bits to see if they stick.
+ */
+ sve_kernel_enable(NULL);
+ write_sysreg_s(ZCR_ELx_LEN_MASK, SYS_ZCR_EL1);
+
+ zcr = read_sysreg_s(SYS_ZCR_EL1);
+ zcr &= ~(u64)ZCR_ELx_LEN_MASK; /* find sticky 1s outside LEN field */
+ vq_max = sve_vq_from_vl(sve_get_vl());
+ zcr |= vq_max - 1; /* set LEN field to maximum effective value */
+
+ return zcr;
+}
+
#endif /* __ASSEMBLY__ */
#endif
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index 86f550c..d8e0dc9 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -78,6 +78,7 @@ extern void sve_save_state(void *state, u32 *pfpsr);
extern void sve_load_state(void const *state, u32 const *pfpsr,
unsigned long vq_minus_1);
extern unsigned int sve_get_vl(void);
+extern int sve_kernel_enable(void *);
extern int __ro_after_init sve_max_vl;
@@ -90,10 +91,23 @@ extern void fpsimd_release_task(struct task_struct *task);
extern int sve_set_vector_length(struct task_struct *task,
unsigned long vl, unsigned long flags);
+/*
+ * Probing and setup functions.
+ * Calls to these functions must be serialised with one another.
+ */
+extern void __init sve_init_vq_map(void);
+extern void sve_update_vq_map(void);
+extern int sve_verify_vq_map(void);
+extern void __init sve_setup(void);
+
#else /* ! CONFIG_ARM64_SVE */
static inline void sve_alloc(struct task_struct *task) { }
static inline void fpsimd_release_task(struct task_struct *task) { }
+static inline void sve_init_vq_map(void) { }
+static inline void sve_update_vq_map(void) { }
+static inline int sve_verify_vq_map(void) { return 0; }
+static inline void sve_setup(void) { }
#endif /* ! CONFIG_ARM64_SVE */
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index e226799..2154373 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -27,6 +27,7 @@
#include <asm/cpu.h>
#include <asm/cpufeature.h>
#include <asm/cpu_ops.h>
+#include <asm/fpsimd.h>
#include <asm/mmu_context.h>
#include <asm/processor.h>
#include <asm/sysreg.h>
@@ -287,6 +288,12 @@ static const struct arm64_ftr_bits ftr_id_dfr0[] = {
ARM64_FTR_END,
};
+static const struct arm64_ftr_bits ftr_zcr[] = {
+ ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE,
+ ZCR_ELx_LEN_SHIFT, ZCR_ELx_LEN_SIZE, 0), /* LEN */
+ ARM64_FTR_END,
+};
+
/*
* Common ftr bits for a 32bit register with all hidden, strict
* attributes, with 4bit feature fields and a default safe value of
@@ -353,6 +360,7 @@ static const struct __ftr_reg_entry {
/* Op1 = 0, CRn = 0, CRm = 4 */
ARM64_FTR_REG(SYS_ID_AA64PFR0_EL1, ftr_id_aa64pfr0),
ARM64_FTR_REG(SYS_ID_AA64PFR1_EL1, ftr_raz),
+ ARM64_FTR_REG(SYS_ID_AA64ZFR0_EL1, ftr_raz),
/* Op1 = 0, CRn = 0, CRm = 5 */
ARM64_FTR_REG(SYS_ID_AA64DFR0_EL1, ftr_id_aa64dfr0),
@@ -367,6 +375,9 @@ static const struct __ftr_reg_entry {
ARM64_FTR_REG(SYS_ID_AA64MMFR1_EL1, ftr_id_aa64mmfr1),
ARM64_FTR_REG(SYS_ID_AA64MMFR2_EL1, ftr_id_aa64mmfr2),
+ /* Op1 = 0, CRn = 1, CRm = 2 */
+ ARM64_FTR_REG(SYS_ZCR_EL1, ftr_zcr),
+
/* Op1 = 3, CRn = 0, CRm = 0 */
{ SYS_CTR_EL0, &arm64_ftr_reg_ctrel0 },
ARM64_FTR_REG(SYS_DCZID_EL0, ftr_dczid),
@@ -504,6 +515,7 @@ void __init init_cpu_features(struct cpuinfo_arm64 *info)
init_cpu_ftr_reg(SYS_ID_AA64MMFR2_EL1, info->reg_id_aa64mmfr2);
init_cpu_ftr_reg(SYS_ID_AA64PFR0_EL1, info->reg_id_aa64pfr0);
init_cpu_ftr_reg(SYS_ID_AA64PFR1_EL1, info->reg_id_aa64pfr1);
+ init_cpu_ftr_reg(SYS_ID_AA64ZFR0_EL1, info->reg_id_aa64zfr0);
if (id_aa64pfr0_32bit_el0(info->reg_id_aa64pfr0)) {
init_cpu_ftr_reg(SYS_ID_DFR0_EL1, info->reg_id_dfr0);
@@ -524,6 +536,10 @@ void __init init_cpu_features(struct cpuinfo_arm64 *info)
init_cpu_ftr_reg(SYS_MVFR2_EL1, info->reg_mvfr2);
}
+ if (id_aa64pfr0_sve(info->reg_id_aa64pfr0)) {
+ init_cpu_ftr_reg(SYS_ZCR_EL1, info->reg_zcr);
+ sve_init_vq_map();
+ }
}
static void update_cpu_ftr_reg(struct arm64_ftr_reg *reg, u64 new)
@@ -627,6 +643,9 @@ void update_cpu_features(int cpu,
taint |= check_update_ftr_reg(SYS_ID_AA64PFR1_EL1, cpu,
info->reg_id_aa64pfr1, boot->reg_id_aa64pfr1);
+ taint |= check_update_ftr_reg(SYS_ID_AA64ZFR0_EL1, cpu,
+ info->reg_id_aa64zfr0, boot->reg_id_aa64zfr0);
+
/*
* If we have AArch32, we care about 32-bit features for compat.
* If the system doesn't support AArch32, don't update them.
@@ -674,6 +693,16 @@ void update_cpu_features(int cpu,
info->reg_mvfr2, boot->reg_mvfr2);
}
+ if (id_aa64pfr0_sve(info->reg_id_aa64pfr0)) {
+ taint |= check_update_ftr_reg(SYS_ZCR_EL1, cpu,
+ info->reg_zcr, boot->reg_zcr);
+
+ /* Probe vector lengths, unless we already gave up on SVE */
+ if (id_aa64pfr0_sve(read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1)) &&
+ !sys_caps_initialised)
+ sve_update_vq_map();
+ }
+
/*
* Mismatched CPU features are a recipe for disaster. Don't even
* pretend to support them.
@@ -1106,6 +1135,23 @@ verify_local_cpu_features(const struct arm64_cpu_capabilities *caps)
}
}
+static void verify_sve_features(void)
+{
+ u64 safe_zcr = read_sanitised_ftr_reg(SYS_ZCR_EL1);
+ u64 zcr = read_zcr_features();
+
+ unsigned int safe_len = safe_zcr & ZCR_ELx_LEN_MASK;
+ unsigned int len = zcr & ZCR_ELx_LEN_MASK;
+
+ if (len < safe_len || sve_verify_vq_map()) {
+ pr_crit("CPU%d: SVE: required vector length(s) missing\n",
+ smp_processor_id());
+ cpu_die_early();
+ }
+
+ /* Add checks on other ZCR bits here if necessary */
+}
+
/*
* Run through the enabled system capabilities and enable() it on this CPU.
* The capabilities were decided based on the available CPUs@the boot time.
@@ -1119,8 +1165,12 @@ static void verify_local_cpu_capabilities(void)
verify_local_cpu_errata_workarounds();
verify_local_cpu_features(arm64_features);
verify_local_elf_hwcaps(arm64_elf_hwcaps);
+
if (system_supports_32bit_el0())
verify_local_elf_hwcaps(compat_elf_hwcaps);
+
+ if (system_supports_sve())
+ verify_sve_features();
}
void check_local_cpu_capabilities(void)
@@ -1198,6 +1248,8 @@ void __init setup_cpu_features(void)
if (system_supports_32bit_el0())
setup_elf_hwcaps(compat_elf_hwcaps);
+ sve_setup();
+
/* Advertise that we have computed the system capabilities */
set_sys_caps_initialised();
diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c
index 1ff1c5a..58da504 100644
--- a/arch/arm64/kernel/cpuinfo.c
+++ b/arch/arm64/kernel/cpuinfo.c
@@ -19,6 +19,7 @@
#include <asm/cpu.h>
#include <asm/cputype.h>
#include <asm/cpufeature.h>
+#include <asm/fpsimd.h>
#include <linux/bitops.h>
#include <linux/bug.h>
@@ -331,6 +332,7 @@ static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info)
info->reg_id_aa64mmfr2 = read_cpuid(ID_AA64MMFR2_EL1);
info->reg_id_aa64pfr0 = read_cpuid(ID_AA64PFR0_EL1);
info->reg_id_aa64pfr1 = read_cpuid(ID_AA64PFR1_EL1);
+ info->reg_id_aa64zfr0 = read_cpuid(ID_AA64ZFR0_EL1);
/* Update the 32bit ID registers only if AArch32 is implemented */
if (id_aa64pfr0_32bit_el0(info->reg_id_aa64pfr0)) {
@@ -353,6 +355,10 @@ static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info)
info->reg_mvfr2 = read_cpuid(MVFR2_EL1);
}
+ if (IS_ENABLED(CONFIG_ARM64_SVE) &&
+ id_aa64pfr0_sve(info->reg_id_aa64pfr0))
+ info->reg_zcr = read_zcr_features();
+
cpuinfo_detect_icache_policy(info);
}
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 1ceb069..c112972 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -114,19 +114,19 @@
static DEFINE_PER_CPU(struct fpsimd_state *, fpsimd_last_state);
/* Default VL for tasks that don't set it explicitly: */
-static int sve_default_vl = SVE_VL_MIN;
+static int sve_default_vl = -1;
#ifdef CONFIG_ARM64_SVE
/* Maximum supported vector length across all CPUs (initially poisoned) */
int __ro_after_init sve_max_vl = -1;
/* Set of available vector lengths, as vq_to_bit(vq): */
-static DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
+static __ro_after_init DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
#else /* ! CONFIG_ARM64_SVE */
/* Dummy declaration for code that will be optimised out: */
-extern DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
+extern __ro_after_init DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
#endif /* ! CONFIG_ARM64_SVE */
@@ -496,6 +496,111 @@ int sve_set_vector_length(struct task_struct *task,
}
/*
+ * Bitmap for temporary storage of the per-CPU set of supported vector lengths
+ * during secondary boot.
+ */
+static DECLARE_BITMAP(sve_secondary_vq_map, SVE_VQ_MAX);
+
+static void sve_probe_vqs(DECLARE_BITMAP(map, SVE_VQ_MAX))
+{
+ unsigned int vq, vl;
+ unsigned long zcr;
+
+ bitmap_zero(map, SVE_VQ_MAX);
+
+ zcr = ZCR_ELx_LEN_MASK;
+ zcr = read_sysreg_s(SYS_ZCR_EL1) & ~zcr;
+
+ for (vq = SVE_VQ_MAX; vq >= SVE_VQ_MIN; --vq) {
+ write_sysreg_s(zcr | (vq - 1), SYS_ZCR_EL1); /* self-syncing */
+ vl = sve_get_vl();
+ vq = sve_vq_from_vl(vl); /* skip intervening lengths */
+ set_bit(vq_to_bit(vq), map);
+ }
+}
+
+void __init sve_init_vq_map(void)
+{
+ sve_probe_vqs(sve_vq_map);
+}
+
+/*
+ * If we haven't committed to the set of supported VQs yet, filter out
+ * those not supported by the current CPU.
+ */
+void sve_update_vq_map(void)
+{
+ sve_probe_vqs(sve_secondary_vq_map);
+ bitmap_and(sve_vq_map, sve_vq_map, sve_secondary_vq_map, SVE_VQ_MAX);
+}
+
+/* Check whether the current CPU supports all VQs in the committed set */
+int sve_verify_vq_map(void)
+{
+ int ret = 0;
+
+ sve_probe_vqs(sve_secondary_vq_map);
+ bitmap_andnot(sve_secondary_vq_map, sve_vq_map, sve_secondary_vq_map,
+ SVE_VQ_MAX);
+ if (!bitmap_empty(sve_secondary_vq_map, SVE_VQ_MAX)) {
+ pr_warn("SVE: cpu%d: Required vector length(s) missing\n",
+ smp_processor_id());
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+/*
+ * Enable SVE for EL1.
+ * Intended for use by the cpufeatures code during CPU boot.
+ */
+int sve_kernel_enable(void *__always_unused p)
+{
+ write_sysreg(read_sysreg(CPACR_EL1) | CPACR_EL1_ZEN_EL1EN, CPACR_EL1);
+ isb();
+
+ return 0;
+}
+
+void __init sve_setup(void)
+{
+ u64 zcr;
+
+ if (!system_supports_sve())
+ return;
+
+ /*
+ * The SVE architecture mandates support for 128-bit vectors,
+ * so sve_vq_map must have at least SVE_VQ_MIN set.
+ * If something went wrong, at least try to patch it up:
+ */
+ if (WARN_ON(!test_bit(vq_to_bit(SVE_VQ_MIN), sve_vq_map)))
+ set_bit(vq_to_bit(SVE_VQ_MIN), sve_vq_map);
+
+ zcr = read_sanitised_ftr_reg(SYS_ZCR_EL1);
+ sve_max_vl = sve_vl_from_vq((zcr & ZCR_ELx_LEN_MASK) + 1);
+
+ /*
+ * Sanity-check that the max VL we determined through CPU features
+ * corresponds properly to sve_vq_map. If not, do our best:
+ */
+ if (WARN_ON(sve_max_vl != find_supported_vector_length(sve_max_vl)))
+ sve_max_vl = find_supported_vector_length(sve_max_vl);
+
+ /*
+ * For the default VL, pick the maximum supported value <= 64.
+ * VL == 64 is guaranteed not to grow the signal frame.
+ */
+ sve_default_vl = find_supported_vector_length(64);
+
+ pr_info("SVE: maximum available vector length %u bytes per vector\n",
+ sve_max_vl);
+ pr_info("SVE: default vector length %u bytes per vector\n",
+ sve_default_vl);
+}
+
+/*
* Called from the put_task_struct() path, which cannot get here
* unless dead_task is really dead and not schedulable.
*/
@@ -630,6 +735,9 @@ void fpsimd_flush_thread(void)
* This is where we ensure that all user tasks have a valid
* vector length configured: no kernel task can become a user
* task without an exec and hence a call to this function.
+ * By the time the first call to this function is made, all
+ * early hardware probing is complete, so sve_default_vl
+ * should be valid.
* If a bug causes this to go wrong, we make some noise and
* try to fudge thread.sve_vl to a safe value here.
*/
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 19/30] arm64/sve: Preserve SVE registers around kernel-mode NEON use
2017-10-31 15:50 ` Dave Martin
@ 2017-10-31 15:51 ` Dave Martin
-1 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
Kernel-mode NEON will corrupt the SVE vector registers, due to the
way they alias the FPSIMD vector registers in the hardware.
This patch ensures that any live SVE register content for the task
is saved by kernel_neon_begin(). The data will be restored in the
usual way on return to userspace.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
arch/arm64/kernel/fpsimd.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index c112972..ae10ddb 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -885,8 +885,10 @@ void kernel_neon_begin(void)
__this_cpu_write(kernel_neon_busy, true);
/* Save unsaved task fpsimd state, if any: */
- if (current->mm && !test_and_set_thread_flag(TIF_FOREIGN_FPSTATE))
- fpsimd_save_state(¤t->thread.fpsimd_state);
+ if (current->mm) {
+ task_fpsimd_save();
+ set_thread_flag(TIF_FOREIGN_FPSTATE);
+ }
/* Invalidate any task state remaining in the fpsimd regs: */
__this_cpu_write(fpsimd_last_state, NULL);
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 19/30] arm64/sve: Preserve SVE registers around kernel-mode NEON use
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Kernel-mode NEON will corrupt the SVE vector registers, due to the
way they alias the FPSIMD vector registers in the hardware.
This patch ensures that any live SVE register content for the task
is saved by kernel_neon_begin(). The data will be restored in the
usual way on return to userspace.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
arch/arm64/kernel/fpsimd.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index c112972..ae10ddb 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -885,8 +885,10 @@ void kernel_neon_begin(void)
__this_cpu_write(kernel_neon_busy, true);
/* Save unsaved task fpsimd state, if any: */
- if (current->mm && !test_and_set_thread_flag(TIF_FOREIGN_FPSTATE))
- fpsimd_save_state(¤t->thread.fpsimd_state);
+ if (current->mm) {
+ task_fpsimd_save();
+ set_thread_flag(TIF_FOREIGN_FPSTATE);
+ }
/* Invalidate any task state remaining in the fpsimd regs: */
__this_cpu_write(fpsimd_last_state, NULL);
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 20/30] arm64/sve: Preserve SVE registers around EFI runtime service calls
2017-10-31 15:50 ` Dave Martin
@ 2017-10-31 15:51 ` Dave Martin
-1 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
The EFI runtime services ABI allows EFI to make free use of the
FPSIMD registers during EFI runtime service calls, subject to the
callee-save requirements of the AArch64 procedure call standard.
However, the SVE architecture allows upper bits of the SVE vector
registers to be zeroed as a side-effect of FPSIMD V-register
writes. This means that the SVE vector registers must be saved in
their entirety in order to avoid data loss: non-SVE-aware EFI
implementations cannot restore them correctly.
The non-IRQ case is already handled gracefully by
kernel_neon_begin(). For the IRQ case, this patch allocates a
suitable per-CPU stash buffer for the full SVE register state and
uses it to preserve the affected registers around EFI calls. It is
currently unclear how the EFI runtime services ABI will be
clarified with respect to SVE, so it safest to assume that the
predicate registers and FFR must be saved and restored too.
No attempt is made to restore the restore the vector length after
a call, for now. It is deemed rather insane for EFI to change it,
and contemporary EFI implementations certainly won't.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
arch/arm64/kernel/fpsimd.c | 67 +++++++++++++++++++++++++++++++++++++++++-----
1 file changed, 61 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index ae10ddb..26bd1a8 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -122,11 +122,13 @@ static int sve_default_vl = -1;
int __ro_after_init sve_max_vl = -1;
/* Set of available vector lengths, as vq_to_bit(vq): */
static __ro_after_init DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
+static void __percpu *efi_sve_state;
#else /* ! CONFIG_ARM64_SVE */
/* Dummy declaration for code that will be optimised out: */
extern __ro_after_init DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
+extern void __percpu *efi_sve_state;
#endif /* ! CONFIG_ARM64_SVE */
@@ -551,6 +553,30 @@ int sve_verify_vq_map(void)
return ret;
}
+static void __init sve_efi_setup(void)
+{
+ if (!IS_ENABLED(CONFIG_EFI))
+ return;
+
+ /*
+ * alloc_percpu() warns and prints a backtrace if this goes wrong.
+ * This is evidence of a crippled system and we are returning void,
+ * so no attempt is made to handle this situation here.
+ */
+ if (!sve_vl_valid(sve_max_vl))
+ goto fail;
+
+ efi_sve_state = __alloc_percpu(
+ SVE_SIG_REGS_SIZE(sve_vq_from_vl(sve_max_vl)), SVE_VQ_BYTES);
+ if (!efi_sve_state)
+ goto fail;
+
+ return;
+
+fail:
+ panic("Cannot allocate percpu memory for EFI SVE save/restore");
+}
+
/*
* Enable SVE for EL1.
* Intended for use by the cpufeatures code during CPU boot.
@@ -598,6 +624,8 @@ void __init sve_setup(void)
sve_max_vl);
pr_info("SVE: default vector length %u bytes per vector\n",
sve_default_vl);
+
+ sve_efi_setup();
}
/*
@@ -926,6 +954,7 @@ EXPORT_SYMBOL(kernel_neon_end);
static DEFINE_PER_CPU(struct fpsimd_state, efi_fpsimd_state);
static DEFINE_PER_CPU(bool, efi_fpsimd_state_used);
+static DEFINE_PER_CPU(bool, efi_sve_state_used);
/*
* EFI runtime services support functions
@@ -951,10 +980,24 @@ void __efi_fpsimd_begin(void)
WARN_ON(preemptible());
- if (may_use_simd())
+ if (may_use_simd()) {
kernel_neon_begin();
- else {
- fpsimd_save_state(this_cpu_ptr(&efi_fpsimd_state));
+ } else {
+ /*
+ * If !efi_sve_state, SVE can't be in use yet and doesn't need
+ * preserving:
+ */
+ if (system_supports_sve() && likely(efi_sve_state)) {
+ char *sve_state = this_cpu_ptr(efi_sve_state);
+
+ __this_cpu_write(efi_sve_state_used, true);
+
+ sve_save_state(sve_state + sve_ffr_offset(sve_max_vl),
+ &this_cpu_ptr(&efi_fpsimd_state)->fpsr);
+ } else {
+ fpsimd_save_state(this_cpu_ptr(&efi_fpsimd_state));
+ }
+
__this_cpu_write(efi_fpsimd_state_used, true);
}
}
@@ -967,10 +1010,22 @@ void __efi_fpsimd_end(void)
if (!system_supports_fpsimd())
return;
- if (__this_cpu_xchg(efi_fpsimd_state_used, false))
- fpsimd_load_state(this_cpu_ptr(&efi_fpsimd_state));
- else
+ if (!__this_cpu_xchg(efi_fpsimd_state_used, false)) {
kernel_neon_end();
+ } else {
+ if (system_supports_sve() &&
+ likely(__this_cpu_read(efi_sve_state_used))) {
+ char const *sve_state = this_cpu_ptr(efi_sve_state);
+
+ sve_load_state(sve_state + sve_ffr_offset(sve_max_vl),
+ &this_cpu_ptr(&efi_fpsimd_state)->fpsr,
+ sve_vq_from_vl(sve_get_vl()) - 1);
+
+ __this_cpu_write(efi_sve_state_used, false);
+ } else {
+ fpsimd_load_state(this_cpu_ptr(&efi_fpsimd_state));
+ }
+ }
}
#endif /* CONFIG_EFI */
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 20/30] arm64/sve: Preserve SVE registers around EFI runtime service calls
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
The EFI runtime services ABI allows EFI to make free use of the
FPSIMD registers during EFI runtime service calls, subject to the
callee-save requirements of the AArch64 procedure call standard.
However, the SVE architecture allows upper bits of the SVE vector
registers to be zeroed as a side-effect of FPSIMD V-register
writes. This means that the SVE vector registers must be saved in
their entirety in order to avoid data loss: non-SVE-aware EFI
implementations cannot restore them correctly.
The non-IRQ case is already handled gracefully by
kernel_neon_begin(). For the IRQ case, this patch allocates a
suitable per-CPU stash buffer for the full SVE register state and
uses it to preserve the affected registers around EFI calls. It is
currently unclear how the EFI runtime services ABI will be
clarified with respect to SVE, so it safest to assume that the
predicate registers and FFR must be saved and restored too.
No attempt is made to restore the restore the vector length after
a call, for now. It is deemed rather insane for EFI to change it,
and contemporary EFI implementations certainly won't.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
arch/arm64/kernel/fpsimd.c | 67 +++++++++++++++++++++++++++++++++++++++++-----
1 file changed, 61 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index ae10ddb..26bd1a8 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -122,11 +122,13 @@ static int sve_default_vl = -1;
int __ro_after_init sve_max_vl = -1;
/* Set of available vector lengths, as vq_to_bit(vq): */
static __ro_after_init DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
+static void __percpu *efi_sve_state;
#else /* ! CONFIG_ARM64_SVE */
/* Dummy declaration for code that will be optimised out: */
extern __ro_after_init DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
+extern void __percpu *efi_sve_state;
#endif /* ! CONFIG_ARM64_SVE */
@@ -551,6 +553,30 @@ int sve_verify_vq_map(void)
return ret;
}
+static void __init sve_efi_setup(void)
+{
+ if (!IS_ENABLED(CONFIG_EFI))
+ return;
+
+ /*
+ * alloc_percpu() warns and prints a backtrace if this goes wrong.
+ * This is evidence of a crippled system and we are returning void,
+ * so no attempt is made to handle this situation here.
+ */
+ if (!sve_vl_valid(sve_max_vl))
+ goto fail;
+
+ efi_sve_state = __alloc_percpu(
+ SVE_SIG_REGS_SIZE(sve_vq_from_vl(sve_max_vl)), SVE_VQ_BYTES);
+ if (!efi_sve_state)
+ goto fail;
+
+ return;
+
+fail:
+ panic("Cannot allocate percpu memory for EFI SVE save/restore");
+}
+
/*
* Enable SVE for EL1.
* Intended for use by the cpufeatures code during CPU boot.
@@ -598,6 +624,8 @@ void __init sve_setup(void)
sve_max_vl);
pr_info("SVE: default vector length %u bytes per vector\n",
sve_default_vl);
+
+ sve_efi_setup();
}
/*
@@ -926,6 +954,7 @@ EXPORT_SYMBOL(kernel_neon_end);
static DEFINE_PER_CPU(struct fpsimd_state, efi_fpsimd_state);
static DEFINE_PER_CPU(bool, efi_fpsimd_state_used);
+static DEFINE_PER_CPU(bool, efi_sve_state_used);
/*
* EFI runtime services support functions
@@ -951,10 +980,24 @@ void __efi_fpsimd_begin(void)
WARN_ON(preemptible());
- if (may_use_simd())
+ if (may_use_simd()) {
kernel_neon_begin();
- else {
- fpsimd_save_state(this_cpu_ptr(&efi_fpsimd_state));
+ } else {
+ /*
+ * If !efi_sve_state, SVE can't be in use yet and doesn't need
+ * preserving:
+ */
+ if (system_supports_sve() && likely(efi_sve_state)) {
+ char *sve_state = this_cpu_ptr(efi_sve_state);
+
+ __this_cpu_write(efi_sve_state_used, true);
+
+ sve_save_state(sve_state + sve_ffr_offset(sve_max_vl),
+ &this_cpu_ptr(&efi_fpsimd_state)->fpsr);
+ } else {
+ fpsimd_save_state(this_cpu_ptr(&efi_fpsimd_state));
+ }
+
__this_cpu_write(efi_fpsimd_state_used, true);
}
}
@@ -967,10 +1010,22 @@ void __efi_fpsimd_end(void)
if (!system_supports_fpsimd())
return;
- if (__this_cpu_xchg(efi_fpsimd_state_used, false))
- fpsimd_load_state(this_cpu_ptr(&efi_fpsimd_state));
- else
+ if (!__this_cpu_xchg(efi_fpsimd_state_used, false)) {
kernel_neon_end();
+ } else {
+ if (system_supports_sve() &&
+ likely(__this_cpu_read(efi_sve_state_used))) {
+ char const *sve_state = this_cpu_ptr(efi_sve_state);
+
+ sve_load_state(sve_state + sve_ffr_offset(sve_max_vl),
+ &this_cpu_ptr(&efi_fpsimd_state)->fpsr,
+ sve_vq_from_vl(sve_get_vl()) - 1);
+
+ __this_cpu_write(efi_sve_state_used, false);
+ } else {
+ fpsimd_load_state(this_cpu_ptr(&efi_fpsimd_state));
+ }
+ }
}
#endif /* CONFIG_EFI */
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 21/30] arm64/sve: ptrace and ELF coredump support
2017-10-31 15:50 ` Dave Martin
@ 2017-10-31 15:51 ` Dave Martin
-1 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch,
Alan Hayward
This patch defines and implements a new regset NT_ARM_SVE, which
describes a thread's SVE register state. This allows a debugger to
manipulate the SVE state, as well as being included in ELF
coredumps for post-mortem debugging.
Because the regset size and layout are dependent on the thread's
current vector length, it is not possible to define a C struct to
describe the regset contents as is done for existing regsets.
Instead, and for the same reasons, NT_ARM_SVE is based on the
freeform variable-layout approach used for the SVE signal frame.
Additionally, to reduce debug overhead when debugging threads that
might or might not have live SVE register state, NT_ARM_SVE may be
presented in one of two different formats: the old struct
user_fpsimd_state format is embedded for describing the state of a
thread with no live SVE state, whereas a new variable-layout
structure is embedded for describing live SVE state. This avoids a
debugger needing to poll NT_PRFPREG in addition to NT_ARM_SVE, and
allows existing userspace code to handle the non-SVE case without
too much modification.
For this to work, NT_ARM_SVE is defined with a fixed-format header
of type struct user_sve_header, which the recipient can use to
figure out the content, size and layout of the reset of the regset.
Accessor macros are defined to allow the vector-length-dependent
parts of the regset to be manipulated.
Signed-off-by: Alan Hayward <alan.hayward@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Okamoto Takayuki <tokamoto@jp.fujitsu.com>
---
**Dropped at v3** Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
See v3 posting for history.
---
arch/arm64/include/asm/fpsimd.h | 12 +-
arch/arm64/include/uapi/asm/ptrace.h | 138 +++++++++++++++++
arch/arm64/kernel/fpsimd.c | 60 ++++++++
arch/arm64/kernel/ptrace.c | 280 ++++++++++++++++++++++++++++++++++-
include/uapi/linux/elf.h | 1 +
5 files changed, 482 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index d8e0dc9..d754e5a 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -38,13 +38,16 @@ struct fpsimd_state {
__uint128_t vregs[32];
u32 fpsr;
u32 fpcr;
+ /*
+ * For ptrace compatibility, pad to next 128-bit
+ * boundary here if extending this struct.
+ */
};
};
/* the id of the last cpu to have restored this state */
unsigned int cpu;
};
-
#if defined(__KERNEL__) && defined(CONFIG_COMPAT)
/* Masks for extracting the FPSR and FPCR from the FPSCR */
#define VFP_FPSCR_STAT_MASK 0xf800009f
@@ -88,6 +91,10 @@ extern size_t sve_state_size(struct task_struct const *task);
extern void sve_alloc(struct task_struct *task);
extern void fpsimd_release_task(struct task_struct *task);
+extern void fpsimd_sync_to_sve(struct task_struct *task);
+extern void sve_sync_to_fpsimd(struct task_struct *task);
+extern void sve_sync_from_fpsimd_zeropad(struct task_struct *task);
+
extern int sve_set_vector_length(struct task_struct *task,
unsigned long vl, unsigned long flags);
@@ -104,6 +111,9 @@ extern void __init sve_setup(void);
static inline void sve_alloc(struct task_struct *task) { }
static inline void fpsimd_release_task(struct task_struct *task) { }
+static inline void sve_sync_to_fpsimd(struct task_struct *task) { }
+static inline void sve_sync_from_fpsimd_zeropad(struct task_struct *task) { }
+
static inline void sve_init_vq_map(void) { }
static inline void sve_update_vq_map(void) { }
static inline int sve_verify_vq_map(void) { return 0; }
diff --git a/arch/arm64/include/uapi/asm/ptrace.h b/arch/arm64/include/uapi/asm/ptrace.h
index 3697d95..e708558 100644
--- a/arch/arm64/include/uapi/asm/ptrace.h
+++ b/arch/arm64/include/uapi/asm/ptrace.h
@@ -22,6 +22,7 @@
#include <linux/types.h>
#include <asm/hwcap.h>
+#include <asm/sigcontext.h>
/*
@@ -62,6 +63,8 @@
#ifndef __ASSEMBLY__
+#include <linux/prctl.h>
+
/*
* User structures for general purpose, floating point and debug registers.
*/
@@ -89,6 +92,141 @@ struct user_hwdebug_state {
} dbg_regs[16];
};
+/* SVE/FP/SIMD state (NT_ARM_SVE) */
+
+struct user_sve_header {
+ __u32 size; /* total meaningful regset content in bytes */
+ __u32 max_size; /* maxmium possible size for this thread */
+ __u16 vl; /* current vector length */
+ __u16 max_vl; /* maximum possible vector length */
+ __u16 flags;
+ __u16 __reserved;
+};
+
+/* Definitions for user_sve_header.flags: */
+#define SVE_PT_REGS_MASK (1 << 0)
+
+#define SVE_PT_REGS_FPSIMD 0
+#define SVE_PT_REGS_SVE SVE_PT_REGS_MASK
+
+/*
+ * Common SVE_PT_* flags:
+ * These must be kept in sync with prctl interface in <linux/ptrace.h>
+ */
+#define SVE_PT_VL_INHERIT (PR_SVE_VL_INHERIT >> 16)
+#define SVE_PT_VL_ONEXEC (PR_SVE_SET_VL_ONEXEC >> 16)
+
+
+/*
+ * The remainder of the SVE state follows struct user_sve_header. The
+ * total size of the SVE state (including header) depends on the
+ * metadata in the header: SVE_PT_SIZE(vq, flags) gives the total size
+ * of the state in bytes, including the header.
+ *
+ * Refer to <asm/sigcontext.h> for details of how to pass the correct
+ * "vq" argument to these macros.
+ */
+
+/* Offset from the start of struct user_sve_header to the register data */
+#define SVE_PT_REGS_OFFSET \
+ ((sizeof(struct sve_context) + (SVE_VQ_BYTES - 1)) \
+ / SVE_VQ_BYTES * SVE_VQ_BYTES)
+
+/*
+ * The register data content and layout depends on the value of the
+ * flags field.
+ */
+
+/*
+ * (flags & SVE_PT_REGS_MASK) == SVE_PT_REGS_FPSIMD case:
+ *
+ * The payload starts at offset SVE_PT_FPSIMD_OFFSET, and is of type
+ * struct user_fpsimd_state. Additional data might be appended in the
+ * future: use SVE_PT_FPSIMD_SIZE(vq, flags) to compute the total size.
+ * SVE_PT_FPSIMD_SIZE(vq, flags) will never be less than
+ * sizeof(struct user_fpsimd_state).
+ */
+
+#define SVE_PT_FPSIMD_OFFSET SVE_PT_REGS_OFFSET
+
+#define SVE_PT_FPSIMD_SIZE(vq, flags) (sizeof(struct user_fpsimd_state))
+
+/*
+ * (flags & SVE_PT_REGS_MASK) == SVE_PT_REGS_SVE case:
+ *
+ * The payload starts at offset SVE_PT_SVE_OFFSET, and is of size
+ * SVE_PT_SVE_SIZE(vq, flags).
+ *
+ * Additional macros describe the contents and layout of the payload.
+ * For each, SVE_PT_SVE_x_OFFSET(args) is the start offset relative to
+ * the start of struct user_sve_header, and SVE_PT_SVE_x_SIZE(args) is
+ * the size in bytes:
+ *
+ * x type description
+ * - ---- -----------
+ * ZREGS \
+ * ZREG |
+ * PREGS | refer to <asm/sigcontext.h>
+ * PREG |
+ * FFR /
+ *
+ * FPSR uint32_t FPSR
+ * FPCR uint32_t FPCR
+ *
+ * Additional data might be appended in the future.
+ */
+
+#define SVE_PT_SVE_ZREG_SIZE(vq) SVE_SIG_ZREG_SIZE(vq)
+#define SVE_PT_SVE_PREG_SIZE(vq) SVE_SIG_PREG_SIZE(vq)
+#define SVE_PT_SVE_FFR_SIZE(vq) SVE_SIG_FFR_SIZE(vq)
+#define SVE_PT_SVE_FPSR_SIZE sizeof(__u32)
+#define SVE_PT_SVE_FPCR_SIZE sizeof(__u32)
+
+#define __SVE_SIG_TO_PT(offset) \
+ ((offset) - SVE_SIG_REGS_OFFSET + SVE_PT_REGS_OFFSET)
+
+#define SVE_PT_SVE_OFFSET SVE_PT_REGS_OFFSET
+
+#define SVE_PT_SVE_ZREGS_OFFSET \
+ __SVE_SIG_TO_PT(SVE_SIG_ZREGS_OFFSET)
+#define SVE_PT_SVE_ZREG_OFFSET(vq, n) \
+ __SVE_SIG_TO_PT(SVE_SIG_ZREG_OFFSET(vq, n))
+#define SVE_PT_SVE_ZREGS_SIZE(vq) \
+ (SVE_PT_SVE_ZREG_OFFSET(vq, SVE_NUM_ZREGS) - SVE_PT_SVE_ZREGS_OFFSET)
+
+#define SVE_PT_SVE_PREGS_OFFSET(vq) \
+ __SVE_SIG_TO_PT(SVE_SIG_PREGS_OFFSET(vq))
+#define SVE_PT_SVE_PREG_OFFSET(vq, n) \
+ __SVE_SIG_TO_PT(SVE_SIG_PREG_OFFSET(vq, n))
+#define SVE_PT_SVE_PREGS_SIZE(vq) \
+ (SVE_PT_SVE_PREG_OFFSET(vq, SVE_NUM_PREGS) - \
+ SVE_PT_SVE_PREGS_OFFSET(vq))
+
+#define SVE_PT_SVE_FFR_OFFSET(vq) \
+ __SVE_SIG_TO_PT(SVE_SIG_FFR_OFFSET(vq))
+
+#define SVE_PT_SVE_FPSR_OFFSET(vq) \
+ ((SVE_PT_SVE_FFR_OFFSET(vq) + SVE_PT_SVE_FFR_SIZE(vq) + \
+ (SVE_VQ_BYTES - 1)) \
+ / SVE_VQ_BYTES * SVE_VQ_BYTES)
+#define SVE_PT_SVE_FPCR_OFFSET(vq) \
+ (SVE_PT_SVE_FPSR_OFFSET(vq) + SVE_PT_SVE_FPSR_SIZE)
+
+/*
+ * Any future extension appended after FPCR must be aligned to the next
+ * 128-bit boundary.
+ */
+
+#define SVE_PT_SVE_SIZE(vq, flags) \
+ ((SVE_PT_SVE_FPCR_OFFSET(vq) + SVE_PT_SVE_FPCR_SIZE \
+ - SVE_PT_SVE_OFFSET + (SVE_VQ_BYTES - 1)) \
+ / SVE_VQ_BYTES * SVE_VQ_BYTES)
+
+#define SVE_PT_SIZE(vq, flags) \
+ (((flags) & SVE_PT_REGS_MASK) == SVE_PT_REGS_SVE ? \
+ SVE_PT_SVE_OFFSET + SVE_PT_SVE_SIZE(vq, flags) \
+ : SVE_PT_FPSIMD_OFFSET + SVE_PT_FPSIMD_SIZE(vq, flags))
+
#endif /* __ASSEMBLY__ */
#endif /* _UAPI__ASM_PTRACE_H */
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 26bd1a8..5715622 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -427,6 +427,66 @@ void sve_alloc(struct task_struct *task)
BUG_ON(!task->thread.sve_state);
}
+
+/*
+ * Ensure that task->thread.sve_state is up to date with respect to
+ * the user task, irrespective of when SVE is in use or not.
+ *
+ * This should only be called by ptrace. task must be non-runnable.
+ * task->thread.sve_state must point to at least sve_state_size(task)
+ * bytes of allocated kernel memory.
+ */
+void fpsimd_sync_to_sve(struct task_struct *task)
+{
+ if (!test_tsk_thread_flag(task, TIF_SVE))
+ fpsimd_to_sve(task);
+}
+
+/*
+ * Ensure that task->thread.fpsimd_state is up to date with respect to
+ * the user task, irrespective of whether SVE is in use or not.
+ *
+ * This should only be called by ptrace. task must be non-runnable.
+ * task->thread.sve_state must point to at least sve_state_size(task)
+ * bytes of allocated kernel memory.
+ */
+void sve_sync_to_fpsimd(struct task_struct *task)
+{
+ if (test_tsk_thread_flag(task, TIF_SVE))
+ sve_to_fpsimd(task);
+}
+
+/*
+ * Ensure that task->thread.sve_state is up to date with respect to
+ * the task->thread.fpsimd_state.
+ *
+ * This should only be called by ptrace to merge new FPSIMD register
+ * values into a task for which SVE is currently active.
+ * task must be non-runnable.
+ * task->thread.sve_state must point to at least sve_state_size(task)
+ * bytes of allocated kernel memory.
+ * task->thread.fpsimd_state must already have been initialised with
+ * the new FPSIMD register values to be merged in.
+ */
+void sve_sync_from_fpsimd_zeropad(struct task_struct *task)
+{
+ unsigned int vq;
+ void *sst = task->thread.sve_state;
+ struct fpsimd_state const *fst = &task->thread.fpsimd_state;
+ unsigned int i;
+
+ if (!test_tsk_thread_flag(task, TIF_SVE))
+ return;
+
+ vq = sve_vq_from_vl(task->thread.sve_vl);
+
+ memset(sst, 0, SVE_SIG_REGS_SIZE(vq));
+
+ for (i = 0; i < 32; ++i)
+ memcpy(ZREG(sst, vq, i), &fst->vregs[i],
+ sizeof(fst->vregs[i]));
+}
+
int sve_set_vector_length(struct task_struct *task,
unsigned long vl, unsigned long flags)
{
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index 9cbb612..7c44658 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -32,6 +32,7 @@
#include <linux/security.h>
#include <linux/init.h>
#include <linux/signal.h>
+#include <linux/string.h>
#include <linux/uaccess.h>
#include <linux/perf_event.h>
#include <linux/hw_breakpoint.h>
@@ -40,6 +41,7 @@
#include <linux/elf.h>
#include <asm/compat.h>
+#include <asm/cpufeature.h>
#include <asm/debug-monitors.h>
#include <asm/pgtable.h>
#include <asm/stacktrace.h>
@@ -618,17 +620,56 @@ static int gpr_set(struct task_struct *target, const struct user_regset *regset,
/*
* TODO: update fp accessors for lazy context switching (sync/flush hwstate)
*/
-static int fpr_get(struct task_struct *target, const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
+static int __fpr_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf, unsigned int start_pos)
{
struct user_fpsimd_state *uregs;
+
+ sve_sync_to_fpsimd(target);
+
uregs = &target->thread.fpsimd_state.user_fpsimd;
+ return user_regset_copyout(&pos, &count, &kbuf, &ubuf, uregs,
+ start_pos, start_pos + sizeof(*uregs));
+}
+
+static int fpr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
if (target == current)
fpsimd_preserve_current_state();
- return user_regset_copyout(&pos, &count, &kbuf, &ubuf, uregs, 0, -1);
+ return __fpr_get(target, regset, pos, count, kbuf, ubuf, 0);
+}
+
+static int __fpr_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf,
+ unsigned int start_pos)
+{
+ int ret;
+ struct user_fpsimd_state newstate;
+
+ /*
+ * Ensure target->thread.fpsimd_state is up to date, so that a
+ * short copyin can't resurrect stale data.
+ */
+ sve_sync_to_fpsimd(target);
+
+ newstate = target->thread.fpsimd_state.user_fpsimd;
+
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &newstate,
+ start_pos, start_pos + sizeof(newstate));
+ if (ret)
+ return ret;
+
+ target->thread.fpsimd_state.user_fpsimd = newstate;
+
+ return ret;
}
static int fpr_set(struct task_struct *target, const struct user_regset *regset,
@@ -636,15 +677,14 @@ static int fpr_set(struct task_struct *target, const struct user_regset *regset,
const void *kbuf, const void __user *ubuf)
{
int ret;
- struct user_fpsimd_state newstate =
- target->thread.fpsimd_state.user_fpsimd;
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &newstate, 0, -1);
+ ret = __fpr_set(target, regset, pos, count, kbuf, ubuf, 0);
if (ret)
return ret;
- target->thread.fpsimd_state.user_fpsimd = newstate;
+ sve_sync_from_fpsimd_zeropad(target);
fpsimd_flush_task_state(target);
+
return ret;
}
@@ -702,6 +742,215 @@ static int system_call_set(struct task_struct *target,
return ret;
}
+#ifdef CONFIG_ARM64_SVE
+
+static void sve_init_header_from_task(struct user_sve_header *header,
+ struct task_struct *target)
+{
+ unsigned int vq;
+
+ memset(header, 0, sizeof(*header));
+
+ header->flags = test_tsk_thread_flag(target, TIF_SVE) ?
+ SVE_PT_REGS_SVE : SVE_PT_REGS_FPSIMD;
+ if (test_tsk_thread_flag(target, TIF_SVE_VL_INHERIT))
+ header->flags |= SVE_PT_VL_INHERIT;
+
+ header->vl = target->thread.sve_vl;
+ vq = sve_vq_from_vl(header->vl);
+
+ header->max_vl = sve_max_vl;
+ if (WARN_ON(!sve_vl_valid(sve_max_vl)))
+ header->max_vl = header->vl;
+
+ header->size = SVE_PT_SIZE(vq, header->flags);
+ header->max_size = SVE_PT_SIZE(sve_vq_from_vl(header->max_vl),
+ SVE_PT_REGS_SVE);
+}
+
+static unsigned int sve_size_from_header(struct user_sve_header const *header)
+{
+ return ALIGN(header->size, SVE_VQ_BYTES);
+}
+
+static unsigned int sve_get_size(struct task_struct *target,
+ const struct user_regset *regset)
+{
+ struct user_sve_header header;
+
+ if (!system_supports_sve())
+ return 0;
+
+ sve_init_header_from_task(&header, target);
+ return sve_size_from_header(&header);
+}
+
+static int sve_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ int ret;
+ struct user_sve_header header;
+ unsigned int vq;
+ unsigned long start, end;
+
+ if (!system_supports_sve())
+ return -EINVAL;
+
+ /* Header */
+ sve_init_header_from_task(&header, target);
+ vq = sve_vq_from_vl(header.vl);
+
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &header,
+ 0, sizeof(header));
+ if (ret)
+ return ret;
+
+ if (target == current)
+ fpsimd_preserve_current_state();
+
+ /* Registers: FPSIMD-only case */
+
+ BUILD_BUG_ON(SVE_PT_FPSIMD_OFFSET != sizeof(header));
+ if ((header.flags & SVE_PT_REGS_MASK) == SVE_PT_REGS_FPSIMD)
+ return __fpr_get(target, regset, pos, count, kbuf, ubuf,
+ SVE_PT_FPSIMD_OFFSET);
+
+ /* Otherwise: full SVE case */
+
+ BUILD_BUG_ON(SVE_PT_SVE_OFFSET != sizeof(header));
+ start = SVE_PT_SVE_OFFSET;
+ end = SVE_PT_SVE_FFR_OFFSET(vq) + SVE_PT_SVE_FFR_SIZE(vq);
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ target->thread.sve_state,
+ start, end);
+ if (ret)
+ return ret;
+
+ start = end;
+ end = SVE_PT_SVE_FPSR_OFFSET(vq);
+ ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+ start, end);
+ if (ret)
+ return ret;
+
+ /*
+ * Copy fpsr, and fpcr which must follow contiguously in
+ * struct fpsimd_state:
+ */
+ start = end;
+ end = SVE_PT_SVE_FPCR_OFFSET(vq) + SVE_PT_SVE_FPCR_SIZE;
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.fpsimd_state.fpsr,
+ start, end);
+ if (ret)
+ return ret;
+
+ start = end;
+ end = sve_size_from_header(&header);
+ return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+ start, end);
+}
+
+static int sve_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ int ret;
+ struct user_sve_header header;
+ unsigned int vq;
+ unsigned long start, end;
+
+ if (!system_supports_sve())
+ return -EINVAL;
+
+ /* Header */
+ if (count < sizeof(header))
+ return -EINVAL;
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &header,
+ 0, sizeof(header));
+ if (ret)
+ goto out;
+
+ /*
+ * Apart from PT_SVE_REGS_MASK, all PT_SVE_* flags are consumed by
+ * sve_set_vector_length(), which will also validate them for us:
+ */
+ ret = sve_set_vector_length(target, header.vl,
+ ((unsigned long)header.flags & ~SVE_PT_REGS_MASK) << 16);
+ if (ret)
+ goto out;
+
+ /* Actual VL set may be less than the user asked for: */
+ vq = sve_vq_from_vl(target->thread.sve_vl);
+
+ /* Registers: FPSIMD-only case */
+
+ BUILD_BUG_ON(SVE_PT_FPSIMD_OFFSET != sizeof(header));
+ if ((header.flags & SVE_PT_REGS_MASK) == SVE_PT_REGS_FPSIMD) {
+ ret = __fpr_set(target, regset, pos, count, kbuf, ubuf,
+ SVE_PT_FPSIMD_OFFSET);
+ clear_tsk_thread_flag(target, TIF_SVE);
+ goto out;
+ }
+
+ /* Otherwise: full SVE case */
+
+ /*
+ * If setting a different VL from the requested VL and there is
+ * register data, the data layout will be wrong: don't even
+ * try to set the registers in this case.
+ */
+ if (count && vq != sve_vq_from_vl(header.vl)) {
+ ret = -EIO;
+ goto out;
+ }
+
+ sve_alloc(target);
+
+ /*
+ * Ensure target->thread.sve_state is up to date with target's
+ * FPSIMD regs, so that a short copyin leaves trailing registers
+ * unmodified.
+ */
+ fpsimd_sync_to_sve(target);
+ set_tsk_thread_flag(target, TIF_SVE);
+
+ BUILD_BUG_ON(SVE_PT_SVE_OFFSET != sizeof(header));
+ start = SVE_PT_SVE_OFFSET;
+ end = SVE_PT_SVE_FFR_OFFSET(vq) + SVE_PT_SVE_FFR_SIZE(vq);
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ target->thread.sve_state,
+ start, end);
+ if (ret)
+ goto out;
+
+ start = end;
+ end = SVE_PT_SVE_FPSR_OFFSET(vq);
+ ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+ start, end);
+ if (ret)
+ goto out;
+
+ /*
+ * Copy fpsr, and fpcr which must follow contiguously in
+ * struct fpsimd_state:
+ */
+ start = end;
+ end = SVE_PT_SVE_FPCR_OFFSET(vq) + SVE_PT_SVE_FPCR_SIZE;
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.fpsimd_state.fpsr,
+ start, end);
+
+out:
+ fpsimd_flush_task_state(target);
+ return ret;
+}
+
+#endif /* CONFIG_ARM64_SVE */
+
enum aarch64_regset {
REGSET_GPR,
REGSET_FPR,
@@ -711,6 +960,9 @@ enum aarch64_regset {
REGSET_HW_WATCH,
#endif
REGSET_SYSTEM_CALL,
+#ifdef CONFIG_ARM64_SVE
+ REGSET_SVE,
+#endif
};
static const struct user_regset aarch64_regsets[] = {
@@ -768,6 +1020,18 @@ static const struct user_regset aarch64_regsets[] = {
.get = system_call_get,
.set = system_call_set,
},
+#ifdef CONFIG_ARM64_SVE
+ [REGSET_SVE] = { /* Scalable Vector Extension */
+ .core_note_type = NT_ARM_SVE,
+ .n = DIV_ROUND_UP(SVE_PT_SIZE(SVE_VQ_MAX, SVE_PT_REGS_SVE),
+ SVE_VQ_BYTES),
+ .size = SVE_VQ_BYTES,
+ .align = SVE_VQ_BYTES,
+ .get = sve_get,
+ .set = sve_set,
+ .get_size = sve_get_size,
+ },
+#endif
};
static const struct user_regset_view user_aarch64_view = {
diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h
index b5280db..735b8f4 100644
--- a/include/uapi/linux/elf.h
+++ b/include/uapi/linux/elf.h
@@ -416,6 +416,7 @@ typedef struct elf64_shdr {
#define NT_ARM_HW_BREAK 0x402 /* ARM hardware breakpoint registers */
#define NT_ARM_HW_WATCH 0x403 /* ARM hardware watchpoint registers */
#define NT_ARM_SYSTEM_CALL 0x404 /* ARM system call number */
+#define NT_ARM_SVE 0x405 /* ARM Scalable Vector Extension registers */
#define NT_METAG_CBUF 0x500 /* Metag catch buffer registers */
#define NT_METAG_RPIPE 0x501 /* Metag read pipeline state */
#define NT_METAG_TLS 0x502 /* Metag TLS pointer */
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 21/30] arm64/sve: ptrace and ELF coredump support
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
This patch defines and implements a new regset NT_ARM_SVE, which
describes a thread's SVE register state. This allows a debugger to
manipulate the SVE state, as well as being included in ELF
coredumps for post-mortem debugging.
Because the regset size and layout are dependent on the thread's
current vector length, it is not possible to define a C struct to
describe the regset contents as is done for existing regsets.
Instead, and for the same reasons, NT_ARM_SVE is based on the
freeform variable-layout approach used for the SVE signal frame.
Additionally, to reduce debug overhead when debugging threads that
might or might not have live SVE register state, NT_ARM_SVE may be
presented in one of two different formats: the old struct
user_fpsimd_state format is embedded for describing the state of a
thread with no live SVE state, whereas a new variable-layout
structure is embedded for describing live SVE state. This avoids a
debugger needing to poll NT_PRFPREG in addition to NT_ARM_SVE, and
allows existing userspace code to handle the non-SVE case without
too much modification.
For this to work, NT_ARM_SVE is defined with a fixed-format header
of type struct user_sve_header, which the recipient can use to
figure out the content, size and layout of the reset of the regset.
Accessor macros are defined to allow the vector-length-dependent
parts of the regset to be manipulated.
Signed-off-by: Alan Hayward <alan.hayward@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alex Benn?e <alex.bennee@linaro.org>
Cc: Okamoto Takayuki <tokamoto@jp.fujitsu.com>
---
**Dropped at v3** Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
See v3 posting for history.
---
arch/arm64/include/asm/fpsimd.h | 12 +-
arch/arm64/include/uapi/asm/ptrace.h | 138 +++++++++++++++++
arch/arm64/kernel/fpsimd.c | 60 ++++++++
arch/arm64/kernel/ptrace.c | 280 ++++++++++++++++++++++++++++++++++-
include/uapi/linux/elf.h | 1 +
5 files changed, 482 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index d8e0dc9..d754e5a 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -38,13 +38,16 @@ struct fpsimd_state {
__uint128_t vregs[32];
u32 fpsr;
u32 fpcr;
+ /*
+ * For ptrace compatibility, pad to next 128-bit
+ * boundary here if extending this struct.
+ */
};
};
/* the id of the last cpu to have restored this state */
unsigned int cpu;
};
-
#if defined(__KERNEL__) && defined(CONFIG_COMPAT)
/* Masks for extracting the FPSR and FPCR from the FPSCR */
#define VFP_FPSCR_STAT_MASK 0xf800009f
@@ -88,6 +91,10 @@ extern size_t sve_state_size(struct task_struct const *task);
extern void sve_alloc(struct task_struct *task);
extern void fpsimd_release_task(struct task_struct *task);
+extern void fpsimd_sync_to_sve(struct task_struct *task);
+extern void sve_sync_to_fpsimd(struct task_struct *task);
+extern void sve_sync_from_fpsimd_zeropad(struct task_struct *task);
+
extern int sve_set_vector_length(struct task_struct *task,
unsigned long vl, unsigned long flags);
@@ -104,6 +111,9 @@ extern void __init sve_setup(void);
static inline void sve_alloc(struct task_struct *task) { }
static inline void fpsimd_release_task(struct task_struct *task) { }
+static inline void sve_sync_to_fpsimd(struct task_struct *task) { }
+static inline void sve_sync_from_fpsimd_zeropad(struct task_struct *task) { }
+
static inline void sve_init_vq_map(void) { }
static inline void sve_update_vq_map(void) { }
static inline int sve_verify_vq_map(void) { return 0; }
diff --git a/arch/arm64/include/uapi/asm/ptrace.h b/arch/arm64/include/uapi/asm/ptrace.h
index 3697d95..e708558 100644
--- a/arch/arm64/include/uapi/asm/ptrace.h
+++ b/arch/arm64/include/uapi/asm/ptrace.h
@@ -22,6 +22,7 @@
#include <linux/types.h>
#include <asm/hwcap.h>
+#include <asm/sigcontext.h>
/*
@@ -62,6 +63,8 @@
#ifndef __ASSEMBLY__
+#include <linux/prctl.h>
+
/*
* User structures for general purpose, floating point and debug registers.
*/
@@ -89,6 +92,141 @@ struct user_hwdebug_state {
} dbg_regs[16];
};
+/* SVE/FP/SIMD state (NT_ARM_SVE) */
+
+struct user_sve_header {
+ __u32 size; /* total meaningful regset content in bytes */
+ __u32 max_size; /* maxmium possible size for this thread */
+ __u16 vl; /* current vector length */
+ __u16 max_vl; /* maximum possible vector length */
+ __u16 flags;
+ __u16 __reserved;
+};
+
+/* Definitions for user_sve_header.flags: */
+#define SVE_PT_REGS_MASK (1 << 0)
+
+#define SVE_PT_REGS_FPSIMD 0
+#define SVE_PT_REGS_SVE SVE_PT_REGS_MASK
+
+/*
+ * Common SVE_PT_* flags:
+ * These must be kept in sync with prctl interface in <linux/ptrace.h>
+ */
+#define SVE_PT_VL_INHERIT (PR_SVE_VL_INHERIT >> 16)
+#define SVE_PT_VL_ONEXEC (PR_SVE_SET_VL_ONEXEC >> 16)
+
+
+/*
+ * The remainder of the SVE state follows struct user_sve_header. The
+ * total size of the SVE state (including header) depends on the
+ * metadata in the header: SVE_PT_SIZE(vq, flags) gives the total size
+ * of the state in bytes, including the header.
+ *
+ * Refer to <asm/sigcontext.h> for details of how to pass the correct
+ * "vq" argument to these macros.
+ */
+
+/* Offset from the start of struct user_sve_header to the register data */
+#define SVE_PT_REGS_OFFSET \
+ ((sizeof(struct sve_context) + (SVE_VQ_BYTES - 1)) \
+ / SVE_VQ_BYTES * SVE_VQ_BYTES)
+
+/*
+ * The register data content and layout depends on the value of the
+ * flags field.
+ */
+
+/*
+ * (flags & SVE_PT_REGS_MASK) == SVE_PT_REGS_FPSIMD case:
+ *
+ * The payload starts at offset SVE_PT_FPSIMD_OFFSET, and is of type
+ * struct user_fpsimd_state. Additional data might be appended in the
+ * future: use SVE_PT_FPSIMD_SIZE(vq, flags) to compute the total size.
+ * SVE_PT_FPSIMD_SIZE(vq, flags) will never be less than
+ * sizeof(struct user_fpsimd_state).
+ */
+
+#define SVE_PT_FPSIMD_OFFSET SVE_PT_REGS_OFFSET
+
+#define SVE_PT_FPSIMD_SIZE(vq, flags) (sizeof(struct user_fpsimd_state))
+
+/*
+ * (flags & SVE_PT_REGS_MASK) == SVE_PT_REGS_SVE case:
+ *
+ * The payload starts at offset SVE_PT_SVE_OFFSET, and is of size
+ * SVE_PT_SVE_SIZE(vq, flags).
+ *
+ * Additional macros describe the contents and layout of the payload.
+ * For each, SVE_PT_SVE_x_OFFSET(args) is the start offset relative to
+ * the start of struct user_sve_header, and SVE_PT_SVE_x_SIZE(args) is
+ * the size in bytes:
+ *
+ * x type description
+ * - ---- -----------
+ * ZREGS \
+ * ZREG |
+ * PREGS | refer to <asm/sigcontext.h>
+ * PREG |
+ * FFR /
+ *
+ * FPSR uint32_t FPSR
+ * FPCR uint32_t FPCR
+ *
+ * Additional data might be appended in the future.
+ */
+
+#define SVE_PT_SVE_ZREG_SIZE(vq) SVE_SIG_ZREG_SIZE(vq)
+#define SVE_PT_SVE_PREG_SIZE(vq) SVE_SIG_PREG_SIZE(vq)
+#define SVE_PT_SVE_FFR_SIZE(vq) SVE_SIG_FFR_SIZE(vq)
+#define SVE_PT_SVE_FPSR_SIZE sizeof(__u32)
+#define SVE_PT_SVE_FPCR_SIZE sizeof(__u32)
+
+#define __SVE_SIG_TO_PT(offset) \
+ ((offset) - SVE_SIG_REGS_OFFSET + SVE_PT_REGS_OFFSET)
+
+#define SVE_PT_SVE_OFFSET SVE_PT_REGS_OFFSET
+
+#define SVE_PT_SVE_ZREGS_OFFSET \
+ __SVE_SIG_TO_PT(SVE_SIG_ZREGS_OFFSET)
+#define SVE_PT_SVE_ZREG_OFFSET(vq, n) \
+ __SVE_SIG_TO_PT(SVE_SIG_ZREG_OFFSET(vq, n))
+#define SVE_PT_SVE_ZREGS_SIZE(vq) \
+ (SVE_PT_SVE_ZREG_OFFSET(vq, SVE_NUM_ZREGS) - SVE_PT_SVE_ZREGS_OFFSET)
+
+#define SVE_PT_SVE_PREGS_OFFSET(vq) \
+ __SVE_SIG_TO_PT(SVE_SIG_PREGS_OFFSET(vq))
+#define SVE_PT_SVE_PREG_OFFSET(vq, n) \
+ __SVE_SIG_TO_PT(SVE_SIG_PREG_OFFSET(vq, n))
+#define SVE_PT_SVE_PREGS_SIZE(vq) \
+ (SVE_PT_SVE_PREG_OFFSET(vq, SVE_NUM_PREGS) - \
+ SVE_PT_SVE_PREGS_OFFSET(vq))
+
+#define SVE_PT_SVE_FFR_OFFSET(vq) \
+ __SVE_SIG_TO_PT(SVE_SIG_FFR_OFFSET(vq))
+
+#define SVE_PT_SVE_FPSR_OFFSET(vq) \
+ ((SVE_PT_SVE_FFR_OFFSET(vq) + SVE_PT_SVE_FFR_SIZE(vq) + \
+ (SVE_VQ_BYTES - 1)) \
+ / SVE_VQ_BYTES * SVE_VQ_BYTES)
+#define SVE_PT_SVE_FPCR_OFFSET(vq) \
+ (SVE_PT_SVE_FPSR_OFFSET(vq) + SVE_PT_SVE_FPSR_SIZE)
+
+/*
+ * Any future extension appended after FPCR must be aligned to the next
+ * 128-bit boundary.
+ */
+
+#define SVE_PT_SVE_SIZE(vq, flags) \
+ ((SVE_PT_SVE_FPCR_OFFSET(vq) + SVE_PT_SVE_FPCR_SIZE \
+ - SVE_PT_SVE_OFFSET + (SVE_VQ_BYTES - 1)) \
+ / SVE_VQ_BYTES * SVE_VQ_BYTES)
+
+#define SVE_PT_SIZE(vq, flags) \
+ (((flags) & SVE_PT_REGS_MASK) == SVE_PT_REGS_SVE ? \
+ SVE_PT_SVE_OFFSET + SVE_PT_SVE_SIZE(vq, flags) \
+ : SVE_PT_FPSIMD_OFFSET + SVE_PT_FPSIMD_SIZE(vq, flags))
+
#endif /* __ASSEMBLY__ */
#endif /* _UAPI__ASM_PTRACE_H */
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 26bd1a8..5715622 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -427,6 +427,66 @@ void sve_alloc(struct task_struct *task)
BUG_ON(!task->thread.sve_state);
}
+
+/*
+ * Ensure that task->thread.sve_state is up to date with respect to
+ * the user task, irrespective of when SVE is in use or not.
+ *
+ * This should only be called by ptrace. task must be non-runnable.
+ * task->thread.sve_state must point to at least sve_state_size(task)
+ * bytes of allocated kernel memory.
+ */
+void fpsimd_sync_to_sve(struct task_struct *task)
+{
+ if (!test_tsk_thread_flag(task, TIF_SVE))
+ fpsimd_to_sve(task);
+}
+
+/*
+ * Ensure that task->thread.fpsimd_state is up to date with respect to
+ * the user task, irrespective of whether SVE is in use or not.
+ *
+ * This should only be called by ptrace. task must be non-runnable.
+ * task->thread.sve_state must point to at least sve_state_size(task)
+ * bytes of allocated kernel memory.
+ */
+void sve_sync_to_fpsimd(struct task_struct *task)
+{
+ if (test_tsk_thread_flag(task, TIF_SVE))
+ sve_to_fpsimd(task);
+}
+
+/*
+ * Ensure that task->thread.sve_state is up to date with respect to
+ * the task->thread.fpsimd_state.
+ *
+ * This should only be called by ptrace to merge new FPSIMD register
+ * values into a task for which SVE is currently active.
+ * task must be non-runnable.
+ * task->thread.sve_state must point to at least sve_state_size(task)
+ * bytes of allocated kernel memory.
+ * task->thread.fpsimd_state must already have been initialised with
+ * the new FPSIMD register values to be merged in.
+ */
+void sve_sync_from_fpsimd_zeropad(struct task_struct *task)
+{
+ unsigned int vq;
+ void *sst = task->thread.sve_state;
+ struct fpsimd_state const *fst = &task->thread.fpsimd_state;
+ unsigned int i;
+
+ if (!test_tsk_thread_flag(task, TIF_SVE))
+ return;
+
+ vq = sve_vq_from_vl(task->thread.sve_vl);
+
+ memset(sst, 0, SVE_SIG_REGS_SIZE(vq));
+
+ for (i = 0; i < 32; ++i)
+ memcpy(ZREG(sst, vq, i), &fst->vregs[i],
+ sizeof(fst->vregs[i]));
+}
+
int sve_set_vector_length(struct task_struct *task,
unsigned long vl, unsigned long flags)
{
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index 9cbb612..7c44658 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -32,6 +32,7 @@
#include <linux/security.h>
#include <linux/init.h>
#include <linux/signal.h>
+#include <linux/string.h>
#include <linux/uaccess.h>
#include <linux/perf_event.h>
#include <linux/hw_breakpoint.h>
@@ -40,6 +41,7 @@
#include <linux/elf.h>
#include <asm/compat.h>
+#include <asm/cpufeature.h>
#include <asm/debug-monitors.h>
#include <asm/pgtable.h>
#include <asm/stacktrace.h>
@@ -618,17 +620,56 @@ static int gpr_set(struct task_struct *target, const struct user_regset *regset,
/*
* TODO: update fp accessors for lazy context switching (sync/flush hwstate)
*/
-static int fpr_get(struct task_struct *target, const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
+static int __fpr_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf, unsigned int start_pos)
{
struct user_fpsimd_state *uregs;
+
+ sve_sync_to_fpsimd(target);
+
uregs = &target->thread.fpsimd_state.user_fpsimd;
+ return user_regset_copyout(&pos, &count, &kbuf, &ubuf, uregs,
+ start_pos, start_pos + sizeof(*uregs));
+}
+
+static int fpr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
if (target == current)
fpsimd_preserve_current_state();
- return user_regset_copyout(&pos, &count, &kbuf, &ubuf, uregs, 0, -1);
+ return __fpr_get(target, regset, pos, count, kbuf, ubuf, 0);
+}
+
+static int __fpr_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf,
+ unsigned int start_pos)
+{
+ int ret;
+ struct user_fpsimd_state newstate;
+
+ /*
+ * Ensure target->thread.fpsimd_state is up to date, so that a
+ * short copyin can't resurrect stale data.
+ */
+ sve_sync_to_fpsimd(target);
+
+ newstate = target->thread.fpsimd_state.user_fpsimd;
+
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &newstate,
+ start_pos, start_pos + sizeof(newstate));
+ if (ret)
+ return ret;
+
+ target->thread.fpsimd_state.user_fpsimd = newstate;
+
+ return ret;
}
static int fpr_set(struct task_struct *target, const struct user_regset *regset,
@@ -636,15 +677,14 @@ static int fpr_set(struct task_struct *target, const struct user_regset *regset,
const void *kbuf, const void __user *ubuf)
{
int ret;
- struct user_fpsimd_state newstate =
- target->thread.fpsimd_state.user_fpsimd;
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &newstate, 0, -1);
+ ret = __fpr_set(target, regset, pos, count, kbuf, ubuf, 0);
if (ret)
return ret;
- target->thread.fpsimd_state.user_fpsimd = newstate;
+ sve_sync_from_fpsimd_zeropad(target);
fpsimd_flush_task_state(target);
+
return ret;
}
@@ -702,6 +742,215 @@ static int system_call_set(struct task_struct *target,
return ret;
}
+#ifdef CONFIG_ARM64_SVE
+
+static void sve_init_header_from_task(struct user_sve_header *header,
+ struct task_struct *target)
+{
+ unsigned int vq;
+
+ memset(header, 0, sizeof(*header));
+
+ header->flags = test_tsk_thread_flag(target, TIF_SVE) ?
+ SVE_PT_REGS_SVE : SVE_PT_REGS_FPSIMD;
+ if (test_tsk_thread_flag(target, TIF_SVE_VL_INHERIT))
+ header->flags |= SVE_PT_VL_INHERIT;
+
+ header->vl = target->thread.sve_vl;
+ vq = sve_vq_from_vl(header->vl);
+
+ header->max_vl = sve_max_vl;
+ if (WARN_ON(!sve_vl_valid(sve_max_vl)))
+ header->max_vl = header->vl;
+
+ header->size = SVE_PT_SIZE(vq, header->flags);
+ header->max_size = SVE_PT_SIZE(sve_vq_from_vl(header->max_vl),
+ SVE_PT_REGS_SVE);
+}
+
+static unsigned int sve_size_from_header(struct user_sve_header const *header)
+{
+ return ALIGN(header->size, SVE_VQ_BYTES);
+}
+
+static unsigned int sve_get_size(struct task_struct *target,
+ const struct user_regset *regset)
+{
+ struct user_sve_header header;
+
+ if (!system_supports_sve())
+ return 0;
+
+ sve_init_header_from_task(&header, target);
+ return sve_size_from_header(&header);
+}
+
+static int sve_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ int ret;
+ struct user_sve_header header;
+ unsigned int vq;
+ unsigned long start, end;
+
+ if (!system_supports_sve())
+ return -EINVAL;
+
+ /* Header */
+ sve_init_header_from_task(&header, target);
+ vq = sve_vq_from_vl(header.vl);
+
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &header,
+ 0, sizeof(header));
+ if (ret)
+ return ret;
+
+ if (target == current)
+ fpsimd_preserve_current_state();
+
+ /* Registers: FPSIMD-only case */
+
+ BUILD_BUG_ON(SVE_PT_FPSIMD_OFFSET != sizeof(header));
+ if ((header.flags & SVE_PT_REGS_MASK) == SVE_PT_REGS_FPSIMD)
+ return __fpr_get(target, regset, pos, count, kbuf, ubuf,
+ SVE_PT_FPSIMD_OFFSET);
+
+ /* Otherwise: full SVE case */
+
+ BUILD_BUG_ON(SVE_PT_SVE_OFFSET != sizeof(header));
+ start = SVE_PT_SVE_OFFSET;
+ end = SVE_PT_SVE_FFR_OFFSET(vq) + SVE_PT_SVE_FFR_SIZE(vq);
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ target->thread.sve_state,
+ start, end);
+ if (ret)
+ return ret;
+
+ start = end;
+ end = SVE_PT_SVE_FPSR_OFFSET(vq);
+ ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+ start, end);
+ if (ret)
+ return ret;
+
+ /*
+ * Copy fpsr, and fpcr which must follow contiguously in
+ * struct fpsimd_state:
+ */
+ start = end;
+ end = SVE_PT_SVE_FPCR_OFFSET(vq) + SVE_PT_SVE_FPCR_SIZE;
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.fpsimd_state.fpsr,
+ start, end);
+ if (ret)
+ return ret;
+
+ start = end;
+ end = sve_size_from_header(&header);
+ return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+ start, end);
+}
+
+static int sve_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ int ret;
+ struct user_sve_header header;
+ unsigned int vq;
+ unsigned long start, end;
+
+ if (!system_supports_sve())
+ return -EINVAL;
+
+ /* Header */
+ if (count < sizeof(header))
+ return -EINVAL;
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &header,
+ 0, sizeof(header));
+ if (ret)
+ goto out;
+
+ /*
+ * Apart from PT_SVE_REGS_MASK, all PT_SVE_* flags are consumed by
+ * sve_set_vector_length(), which will also validate them for us:
+ */
+ ret = sve_set_vector_length(target, header.vl,
+ ((unsigned long)header.flags & ~SVE_PT_REGS_MASK) << 16);
+ if (ret)
+ goto out;
+
+ /* Actual VL set may be less than the user asked for: */
+ vq = sve_vq_from_vl(target->thread.sve_vl);
+
+ /* Registers: FPSIMD-only case */
+
+ BUILD_BUG_ON(SVE_PT_FPSIMD_OFFSET != sizeof(header));
+ if ((header.flags & SVE_PT_REGS_MASK) == SVE_PT_REGS_FPSIMD) {
+ ret = __fpr_set(target, regset, pos, count, kbuf, ubuf,
+ SVE_PT_FPSIMD_OFFSET);
+ clear_tsk_thread_flag(target, TIF_SVE);
+ goto out;
+ }
+
+ /* Otherwise: full SVE case */
+
+ /*
+ * If setting a different VL from the requested VL and there is
+ * register data, the data layout will be wrong: don't even
+ * try to set the registers in this case.
+ */
+ if (count && vq != sve_vq_from_vl(header.vl)) {
+ ret = -EIO;
+ goto out;
+ }
+
+ sve_alloc(target);
+
+ /*
+ * Ensure target->thread.sve_state is up to date with target's
+ * FPSIMD regs, so that a short copyin leaves trailing registers
+ * unmodified.
+ */
+ fpsimd_sync_to_sve(target);
+ set_tsk_thread_flag(target, TIF_SVE);
+
+ BUILD_BUG_ON(SVE_PT_SVE_OFFSET != sizeof(header));
+ start = SVE_PT_SVE_OFFSET;
+ end = SVE_PT_SVE_FFR_OFFSET(vq) + SVE_PT_SVE_FFR_SIZE(vq);
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ target->thread.sve_state,
+ start, end);
+ if (ret)
+ goto out;
+
+ start = end;
+ end = SVE_PT_SVE_FPSR_OFFSET(vq);
+ ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+ start, end);
+ if (ret)
+ goto out;
+
+ /*
+ * Copy fpsr, and fpcr which must follow contiguously in
+ * struct fpsimd_state:
+ */
+ start = end;
+ end = SVE_PT_SVE_FPCR_OFFSET(vq) + SVE_PT_SVE_FPCR_SIZE;
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.fpsimd_state.fpsr,
+ start, end);
+
+out:
+ fpsimd_flush_task_state(target);
+ return ret;
+}
+
+#endif /* CONFIG_ARM64_SVE */
+
enum aarch64_regset {
REGSET_GPR,
REGSET_FPR,
@@ -711,6 +960,9 @@ enum aarch64_regset {
REGSET_HW_WATCH,
#endif
REGSET_SYSTEM_CALL,
+#ifdef CONFIG_ARM64_SVE
+ REGSET_SVE,
+#endif
};
static const struct user_regset aarch64_regsets[] = {
@@ -768,6 +1020,18 @@ static const struct user_regset aarch64_regsets[] = {
.get = system_call_get,
.set = system_call_set,
},
+#ifdef CONFIG_ARM64_SVE
+ [REGSET_SVE] = { /* Scalable Vector Extension */
+ .core_note_type = NT_ARM_SVE,
+ .n = DIV_ROUND_UP(SVE_PT_SIZE(SVE_VQ_MAX, SVE_PT_REGS_SVE),
+ SVE_VQ_BYTES),
+ .size = SVE_VQ_BYTES,
+ .align = SVE_VQ_BYTES,
+ .get = sve_get,
+ .set = sve_set,
+ .get_size = sve_get_size,
+ },
+#endif
};
static const struct user_regset_view user_aarch64_view = {
diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h
index b5280db..735b8f4 100644
--- a/include/uapi/linux/elf.h
+++ b/include/uapi/linux/elf.h
@@ -416,6 +416,7 @@ typedef struct elf64_shdr {
#define NT_ARM_HW_BREAK 0x402 /* ARM hardware breakpoint registers */
#define NT_ARM_HW_WATCH 0x403 /* ARM hardware watchpoint registers */
#define NT_ARM_SYSTEM_CALL 0x404 /* ARM system call number */
+#define NT_ARM_SVE 0x405 /* ARM Scalable Vector Extension registers */
#define NT_METAG_CBUF 0x500 /* Metag catch buffer registers */
#define NT_METAG_RPIPE 0x501 /* Metag read pipeline state */
#define NT_METAG_TLS 0x502 /* Metag TLS pointer */
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 22/30] arm64/sve: Add prctl controls for userspace vector length management
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-arch, Okamoto Takayuki, libc-alpha, Ard Biesheuvel,
Szabolcs Nagy, Catalin Marinas, Will Deacon, kvmarm
This patch adds two arm64-specific prctls, to permit userspace to
control its vector length:
* PR_SVE_SET_VL: set the thread's SVE vector length and vector
length inheritance mode.
* PR_SVE_GET_VL: get the same information.
Although these prctls resemble instruction set features in the SVE
architecture, they provide additional control: the vector length
inheritance mode is Linux-specific and nothing to do with the
architecture, and the architecture does not permit EL0 to set its
own vector length directly. Both can be used in portable tools
without requiring the use of SVE instructions.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
---
**Dropped at v3** Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
See v3 posting for history.
---
arch/arm64/include/asm/fpsimd.h | 14 +++++++++++
arch/arm64/include/asm/processor.h | 4 +++
arch/arm64/kernel/fpsimd.c | 50 ++++++++++++++++++++++++++++++++++++++
include/uapi/linux/prctl.h | 4 +++
kernel/sys.c | 12 +++++++++
5 files changed, 84 insertions(+)
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index d754e5a..b868412 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -17,6 +17,7 @@
#define __ASM_FP_H
#include <asm/ptrace.h>
+#include <asm/errno.h>
#ifndef __ASSEMBLY__
@@ -98,6 +99,9 @@ extern void sve_sync_from_fpsimd_zeropad(struct task_struct *task);
extern int sve_set_vector_length(struct task_struct *task,
unsigned long vl, unsigned long flags);
+extern int sve_set_current_vl(unsigned long arg);
+extern int sve_get_current_vl(void);
+
/*
* Probing and setup functions.
* Calls to these functions must be serialised with one another.
@@ -114,6 +118,16 @@ static inline void fpsimd_release_task(struct task_struct *task) { }
static inline void sve_sync_to_fpsimd(struct task_struct *task) { }
static inline void sve_sync_from_fpsimd_zeropad(struct task_struct *task) { }
+static inline int sve_set_current_vl(unsigned long arg)
+{
+ return -EINVAL;
+}
+
+static inline int sve_get_current_vl(void)
+{
+ return -EINVAL;
+}
+
static inline void sve_init_vq_map(void) { }
static inline void sve_update_vq_map(void) { }
static inline int sve_verify_vq_map(void) { return 0; }
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index c6fddb0..023cacb 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -217,5 +217,9 @@ static inline void spin_lock_prefetch(const void *ptr)
int cpu_enable_pan(void *__unused);
int cpu_enable_cache_maint_trap(void *__unused);
+/* Userspace interface for PR_SVE_{SET,GET}_VL prctl()s: */
+#define SVE_SET_VL(arg) sve_set_current_vl(arg)
+#define SVE_GET_VL() sve_get_current_vl()
+
#endif /* __ASSEMBLY__ */
#endif /* __ASM_PROCESSOR_H */
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 5715622..cbb2c63 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -29,6 +29,7 @@
#include <linux/irqflags.h>
#include <linux/init.h>
#include <linux/percpu.h>
+#include <linux/prctl.h>
#include <linux/preempt.h>
#include <linux/prctl.h>
#include <linux/ptrace.h>
@@ -558,6 +559,55 @@ int sve_set_vector_length(struct task_struct *task,
}
/*
+ * Encode the current vector length and flags for return.
+ * This is only required for prctl(): ptrace has separate fields
+ *
+ * flags are as for sve_set_vector_length().
+ */
+static int sve_prctl_status(unsigned long flags)
+{
+ int ret;
+
+ if (flags & PR_SVE_SET_VL_ONEXEC)
+ ret = current->thread.sve_vl_onexec;
+ else
+ ret = current->thread.sve_vl;
+
+ if (test_thread_flag(TIF_SVE_VL_INHERIT))
+ ret |= PR_SVE_VL_INHERIT;
+
+ return ret;
+}
+
+/* PR_SVE_SET_VL */
+int sve_set_current_vl(unsigned long arg)
+{
+ unsigned long vl, flags;
+ int ret;
+
+ vl = arg & PR_SVE_VL_LEN_MASK;
+ flags = arg & ~vl;
+
+ if (!system_supports_sve())
+ return -EINVAL;
+
+ ret = sve_set_vector_length(current, vl, flags);
+ if (ret)
+ return ret;
+
+ return sve_prctl_status(flags);
+}
+
+/* PR_SVE_GET_VL */
+int sve_get_current_vl(void)
+{
+ if (!system_supports_sve())
+ return -EINVAL;
+
+ return sve_prctl_status(0);
+}
+
+/*
* Bitmap for temporary storage of the per-CPU set of supported vector lengths
* during secondary boot.
*/
diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h
index 1b64901..1ef9370 100644
--- a/include/uapi/linux/prctl.h
+++ b/include/uapi/linux/prctl.h
@@ -198,7 +198,11 @@ struct prctl_mm_map {
# define PR_CAP_AMBIENT_CLEAR_ALL 4
/* arm64 Scalable Vector Extension controls */
+/* Flag values must be kept in sync with ptrace NT_ARM_SVE interface */
+#define PR_SVE_SET_VL 48 /* set task vector length */
# define PR_SVE_SET_VL_ONEXEC (1 << 18) /* defer effect until exec */
+#define PR_SVE_GET_VL 49 /* get task vector length */
+/* Bits common to PR_SVE_SET_VL and PR_SVE_GET_VL */
# define PR_SVE_VL_LEN_MASK 0xffff
# define PR_SVE_VL_INHERIT (1 << 17) /* inherit across exec */
diff --git a/kernel/sys.c b/kernel/sys.c
index 9aebc29..c541916 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -110,6 +110,12 @@
#ifndef SET_FP_MODE
# define SET_FP_MODE(a,b) (-EINVAL)
#endif
+#ifndef SVE_SET_VL
+# define SVE_SET_VL(a) (-EINVAL)
+#endif
+#ifndef SVE_GET_VL
+# define SVE_GET_VL() (-EINVAL)
+#endif
/*
* this is where the system-wide overflow UID and GID are defined, for
@@ -2385,6 +2391,12 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
case PR_GET_FP_MODE:
error = GET_FP_MODE(me);
break;
+ case PR_SVE_SET_VL:
+ error = SVE_SET_VL(arg2);
+ break;
+ case PR_SVE_GET_VL:
+ error = SVE_GET_VL();
+ break;
default:
error = -EINVAL;
break;
--
2.1.4
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 22/30] arm64/sve: Add prctl controls for userspace vector length management
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
This patch adds two arm64-specific prctls, to permit userspace to
control its vector length:
* PR_SVE_SET_VL: set the thread's SVE vector length and vector
length inheritance mode.
* PR_SVE_GET_VL: get the same information.
Although these prctls resemble instruction set features in the SVE
architecture, they provide additional control: the vector length
inheritance mode is Linux-specific and nothing to do with the
architecture, and the architecture does not permit EL0 to set its
own vector length directly. Both can be used in portable tools
without requiring the use of SVE instructions.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
---
**Dropped at v3** Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
See v3 posting for history.
---
arch/arm64/include/asm/fpsimd.h | 14 +++++++++++
arch/arm64/include/asm/processor.h | 4 +++
arch/arm64/kernel/fpsimd.c | 50 ++++++++++++++++++++++++++++++++++++++
include/uapi/linux/prctl.h | 4 +++
kernel/sys.c | 12 +++++++++
5 files changed, 84 insertions(+)
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index d754e5a..b868412 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -17,6 +17,7 @@
#define __ASM_FP_H
#include <asm/ptrace.h>
+#include <asm/errno.h>
#ifndef __ASSEMBLY__
@@ -98,6 +99,9 @@ extern void sve_sync_from_fpsimd_zeropad(struct task_struct *task);
extern int sve_set_vector_length(struct task_struct *task,
unsigned long vl, unsigned long flags);
+extern int sve_set_current_vl(unsigned long arg);
+extern int sve_get_current_vl(void);
+
/*
* Probing and setup functions.
* Calls to these functions must be serialised with one another.
@@ -114,6 +118,16 @@ static inline void fpsimd_release_task(struct task_struct *task) { }
static inline void sve_sync_to_fpsimd(struct task_struct *task) { }
static inline void sve_sync_from_fpsimd_zeropad(struct task_struct *task) { }
+static inline int sve_set_current_vl(unsigned long arg)
+{
+ return -EINVAL;
+}
+
+static inline int sve_get_current_vl(void)
+{
+ return -EINVAL;
+}
+
static inline void sve_init_vq_map(void) { }
static inline void sve_update_vq_map(void) { }
static inline int sve_verify_vq_map(void) { return 0; }
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index c6fddb0..023cacb 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -217,5 +217,9 @@ static inline void spin_lock_prefetch(const void *ptr)
int cpu_enable_pan(void *__unused);
int cpu_enable_cache_maint_trap(void *__unused);
+/* Userspace interface for PR_SVE_{SET,GET}_VL prctl()s: */
+#define SVE_SET_VL(arg) sve_set_current_vl(arg)
+#define SVE_GET_VL() sve_get_current_vl()
+
#endif /* __ASSEMBLY__ */
#endif /* __ASM_PROCESSOR_H */
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 5715622..cbb2c63 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -29,6 +29,7 @@
#include <linux/irqflags.h>
#include <linux/init.h>
#include <linux/percpu.h>
+#include <linux/prctl.h>
#include <linux/preempt.h>
#include <linux/prctl.h>
#include <linux/ptrace.h>
@@ -558,6 +559,55 @@ int sve_set_vector_length(struct task_struct *task,
}
/*
+ * Encode the current vector length and flags for return.
+ * This is only required for prctl(): ptrace has separate fields
+ *
+ * flags are as for sve_set_vector_length().
+ */
+static int sve_prctl_status(unsigned long flags)
+{
+ int ret;
+
+ if (flags & PR_SVE_SET_VL_ONEXEC)
+ ret = current->thread.sve_vl_onexec;
+ else
+ ret = current->thread.sve_vl;
+
+ if (test_thread_flag(TIF_SVE_VL_INHERIT))
+ ret |= PR_SVE_VL_INHERIT;
+
+ return ret;
+}
+
+/* PR_SVE_SET_VL */
+int sve_set_current_vl(unsigned long arg)
+{
+ unsigned long vl, flags;
+ int ret;
+
+ vl = arg & PR_SVE_VL_LEN_MASK;
+ flags = arg & ~vl;
+
+ if (!system_supports_sve())
+ return -EINVAL;
+
+ ret = sve_set_vector_length(current, vl, flags);
+ if (ret)
+ return ret;
+
+ return sve_prctl_status(flags);
+}
+
+/* PR_SVE_GET_VL */
+int sve_get_current_vl(void)
+{
+ if (!system_supports_sve())
+ return -EINVAL;
+
+ return sve_prctl_status(0);
+}
+
+/*
* Bitmap for temporary storage of the per-CPU set of supported vector lengths
* during secondary boot.
*/
diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h
index 1b64901..1ef9370 100644
--- a/include/uapi/linux/prctl.h
+++ b/include/uapi/linux/prctl.h
@@ -198,7 +198,11 @@ struct prctl_mm_map {
# define PR_CAP_AMBIENT_CLEAR_ALL 4
/* arm64 Scalable Vector Extension controls */
+/* Flag values must be kept in sync with ptrace NT_ARM_SVE interface */
+#define PR_SVE_SET_VL 48 /* set task vector length */
# define PR_SVE_SET_VL_ONEXEC (1 << 18) /* defer effect until exec */
+#define PR_SVE_GET_VL 49 /* get task vector length */
+/* Bits common to PR_SVE_SET_VL and PR_SVE_GET_VL */
# define PR_SVE_VL_LEN_MASK 0xffff
# define PR_SVE_VL_INHERIT (1 << 17) /* inherit across exec */
diff --git a/kernel/sys.c b/kernel/sys.c
index 9aebc29..c541916 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -110,6 +110,12 @@
#ifndef SET_FP_MODE
# define SET_FP_MODE(a,b) (-EINVAL)
#endif
+#ifndef SVE_SET_VL
+# define SVE_SET_VL(a) (-EINVAL)
+#endif
+#ifndef SVE_GET_VL
+# define SVE_GET_VL() (-EINVAL)
+#endif
/*
* this is where the system-wide overflow UID and GID are defined, for
@@ -2385,6 +2391,12 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
case PR_GET_FP_MODE:
error = GET_FP_MODE(me);
break;
+ case PR_SVE_SET_VL:
+ error = SVE_SET_VL(arg2);
+ break;
+ case PR_SVE_GET_VL:
+ error = SVE_GET_VL();
+ break;
default:
error = -EINVAL;
break;
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 22/30] arm64/sve: Add prctl controls for userspace vector length management
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds two arm64-specific prctls, to permit userspace to
control its vector length:
* PR_SVE_SET_VL: set the thread's SVE vector length and vector
length inheritance mode.
* PR_SVE_GET_VL: get the same information.
Although these prctls resemble instruction set features in the SVE
architecture, they provide additional control: the vector length
inheritance mode is Linux-specific and nothing to do with the
architecture, and the architecture does not permit EL0 to set its
own vector length directly. Both can be used in portable tools
without requiring the use of SVE instructions.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alex Benn?e <alex.bennee@linaro.org>
---
**Dropped at v3** Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
See v3 posting for history.
---
arch/arm64/include/asm/fpsimd.h | 14 +++++++++++
arch/arm64/include/asm/processor.h | 4 +++
arch/arm64/kernel/fpsimd.c | 50 ++++++++++++++++++++++++++++++++++++++
include/uapi/linux/prctl.h | 4 +++
kernel/sys.c | 12 +++++++++
5 files changed, 84 insertions(+)
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index d754e5a..b868412 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -17,6 +17,7 @@
#define __ASM_FP_H
#include <asm/ptrace.h>
+#include <asm/errno.h>
#ifndef __ASSEMBLY__
@@ -98,6 +99,9 @@ extern void sve_sync_from_fpsimd_zeropad(struct task_struct *task);
extern int sve_set_vector_length(struct task_struct *task,
unsigned long vl, unsigned long flags);
+extern int sve_set_current_vl(unsigned long arg);
+extern int sve_get_current_vl(void);
+
/*
* Probing and setup functions.
* Calls to these functions must be serialised with one another.
@@ -114,6 +118,16 @@ static inline void fpsimd_release_task(struct task_struct *task) { }
static inline void sve_sync_to_fpsimd(struct task_struct *task) { }
static inline void sve_sync_from_fpsimd_zeropad(struct task_struct *task) { }
+static inline int sve_set_current_vl(unsigned long arg)
+{
+ return -EINVAL;
+}
+
+static inline int sve_get_current_vl(void)
+{
+ return -EINVAL;
+}
+
static inline void sve_init_vq_map(void) { }
static inline void sve_update_vq_map(void) { }
static inline int sve_verify_vq_map(void) { return 0; }
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index c6fddb0..023cacb 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -217,5 +217,9 @@ static inline void spin_lock_prefetch(const void *ptr)
int cpu_enable_pan(void *__unused);
int cpu_enable_cache_maint_trap(void *__unused);
+/* Userspace interface for PR_SVE_{SET,GET}_VL prctl()s: */
+#define SVE_SET_VL(arg) sve_set_current_vl(arg)
+#define SVE_GET_VL() sve_get_current_vl()
+
#endif /* __ASSEMBLY__ */
#endif /* __ASM_PROCESSOR_H */
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 5715622..cbb2c63 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -29,6 +29,7 @@
#include <linux/irqflags.h>
#include <linux/init.h>
#include <linux/percpu.h>
+#include <linux/prctl.h>
#include <linux/preempt.h>
#include <linux/prctl.h>
#include <linux/ptrace.h>
@@ -558,6 +559,55 @@ int sve_set_vector_length(struct task_struct *task,
}
/*
+ * Encode the current vector length and flags for return.
+ * This is only required for prctl(): ptrace has separate fields
+ *
+ * flags are as for sve_set_vector_length().
+ */
+static int sve_prctl_status(unsigned long flags)
+{
+ int ret;
+
+ if (flags & PR_SVE_SET_VL_ONEXEC)
+ ret = current->thread.sve_vl_onexec;
+ else
+ ret = current->thread.sve_vl;
+
+ if (test_thread_flag(TIF_SVE_VL_INHERIT))
+ ret |= PR_SVE_VL_INHERIT;
+
+ return ret;
+}
+
+/* PR_SVE_SET_VL */
+int sve_set_current_vl(unsigned long arg)
+{
+ unsigned long vl, flags;
+ int ret;
+
+ vl = arg & PR_SVE_VL_LEN_MASK;
+ flags = arg & ~vl;
+
+ if (!system_supports_sve())
+ return -EINVAL;
+
+ ret = sve_set_vector_length(current, vl, flags);
+ if (ret)
+ return ret;
+
+ return sve_prctl_status(flags);
+}
+
+/* PR_SVE_GET_VL */
+int sve_get_current_vl(void)
+{
+ if (!system_supports_sve())
+ return -EINVAL;
+
+ return sve_prctl_status(0);
+}
+
+/*
* Bitmap for temporary storage of the per-CPU set of supported vector lengths
* during secondary boot.
*/
diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h
index 1b64901..1ef9370 100644
--- a/include/uapi/linux/prctl.h
+++ b/include/uapi/linux/prctl.h
@@ -198,7 +198,11 @@ struct prctl_mm_map {
# define PR_CAP_AMBIENT_CLEAR_ALL 4
/* arm64 Scalable Vector Extension controls */
+/* Flag values must be kept in sync with ptrace NT_ARM_SVE interface */
+#define PR_SVE_SET_VL 48 /* set task vector length */
# define PR_SVE_SET_VL_ONEXEC (1 << 18) /* defer effect until exec */
+#define PR_SVE_GET_VL 49 /* get task vector length */
+/* Bits common to PR_SVE_SET_VL and PR_SVE_GET_VL */
# define PR_SVE_VL_LEN_MASK 0xffff
# define PR_SVE_VL_INHERIT (1 << 17) /* inherit across exec */
diff --git a/kernel/sys.c b/kernel/sys.c
index 9aebc29..c541916 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -110,6 +110,12 @@
#ifndef SET_FP_MODE
# define SET_FP_MODE(a,b) (-EINVAL)
#endif
+#ifndef SVE_SET_VL
+# define SVE_SET_VL(a) (-EINVAL)
+#endif
+#ifndef SVE_GET_VL
+# define SVE_GET_VL() (-EINVAL)
+#endif
/*
* this is where the system-wide overflow UID and GID are defined, for
@@ -2385,6 +2391,12 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
case PR_GET_FP_MODE:
error = GET_FP_MODE(me);
break;
+ case PR_SVE_SET_VL:
+ error = SVE_SET_VL(arg2);
+ break;
+ case PR_SVE_GET_VL:
+ error = SVE_GET_VL();
+ break;
default:
error = -EINVAL;
break;
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 23/30] arm64/sve: Add sysctl to set the default vector length for new processes
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-arch, Okamoto Takayuki, libc-alpha, Ard Biesheuvel,
Szabolcs Nagy, Catalin Marinas, Will Deacon, kvmarm
Because of the effect of SVE on the size of the signal frame, the
default vector length used for new processes involves a tradeoff
between performance of SVE-enabled software on the one hand, and
reliability of non-SVE-aware software on the other hand.
For this reason, the best choice depends on the repertoire of
userspace software in use and is thus best left up to distro
maintainers, sysadmins and developers.
If CONFIG_SYSCTL and CONFIG_PROC_SYSCTL are enabled, this patch
exposes the default vector length in
/proc/sys/abi/sve_default_vector_length, where boot scripts or the
adventurous can poke it.
In common with other arm64 ABI sysctls, this control is currently
global: setting it requires CAP_SYS_ADMIN in the root user
namespace, but the value set is effective for subsequent execs in
all namespaces. The control only affects _new_ processes, however:
changing it does not affect the vector length of any existing
process.
The intended usage model is that if userspace is known to be fully
SVE-tolerant (or a developer is curious to find out) then this
parameter can be cranked up during system startup.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
arch/arm64/kernel/fpsimd.c | 62 +++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 61 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index cbb2c63..4da64fc 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -36,6 +36,7 @@
#include <linux/sched/signal.h>
#include <linux/signal.h>
#include <linux/slab.h>
+#include <linux/sysctl.h>
#include <asm/fpsimd.h>
#include <asm/cputype.h>
@@ -334,6 +335,65 @@ static unsigned int find_supported_vector_length(unsigned int vl)
return sve_vl_from_vq(bit_to_vq(bit));
}
+#ifdef CONFIG_SYSCTL
+
+static int sve_proc_do_default_vl(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos)
+{
+ int ret;
+ int vl = sve_default_vl;
+ struct ctl_table tmp_table = {
+ .data = &vl,
+ .maxlen = sizeof(vl),
+ };
+
+ ret = proc_dointvec(&tmp_table, write, buffer, lenp, ppos);
+ if (ret || !write)
+ return ret;
+
+ /* Writing -1 has the special meaning "set to max": */
+ if (vl == -1) {
+ /* Fail safe if sve_max_vl wasn't initialised */
+ if (WARN_ON(!sve_vl_valid(sve_max_vl)))
+ vl = SVE_VL_MIN;
+ else
+ vl = sve_max_vl;
+
+ goto chosen;
+ }
+
+ if (!sve_vl_valid(vl))
+ return -EINVAL;
+
+ vl = find_supported_vector_length(vl);
+chosen:
+ sve_default_vl = vl;
+ return 0;
+}
+
+static struct ctl_table sve_default_vl_table[] = {
+ {
+ .procname = "sve_default_vector_length",
+ .mode = 0644,
+ .proc_handler = sve_proc_do_default_vl,
+ },
+ { }
+};
+
+static int __init sve_sysctl_init(void)
+{
+ if (system_supports_sve())
+ if (!register_sysctl("abi", sve_default_vl_table))
+ return -EINVAL;
+
+ return 0;
+}
+
+#else /* ! CONFIG_SYSCTL */
+static int __init sve_sysctl_init(void) { return 0; }
+#endif /* ! CONFIG_SYSCTL */
+
#define ZREG(sve_state, vq, n) ((char *)(sve_state) + \
(SVE_SIG_ZREG_OFFSET(vq, n) - SVE_SIG_REGS_OFFSET))
@@ -1208,6 +1268,6 @@ static int __init fpsimd_init(void)
if (!(elf_hwcap & HWCAP_ASIMD))
pr_notice("Advanced SIMD is not implemented\n");
- return 0;
+ return sve_sysctl_init();
}
core_initcall(fpsimd_init);
--
2.1.4
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 23/30] arm64/sve: Add sysctl to set the default vector length for new processes
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
Because of the effect of SVE on the size of the signal frame, the
default vector length used for new processes involves a tradeoff
between performance of SVE-enabled software on the one hand, and
reliability of non-SVE-aware software on the other hand.
For this reason, the best choice depends on the repertoire of
userspace software in use and is thus best left up to distro
maintainers, sysadmins and developers.
If CONFIG_SYSCTL and CONFIG_PROC_SYSCTL are enabled, this patch
exposes the default vector length in
/proc/sys/abi/sve_default_vector_length, where boot scripts or the
adventurous can poke it.
In common with other arm64 ABI sysctls, this control is currently
global: setting it requires CAP_SYS_ADMIN in the root user
namespace, but the value set is effective for subsequent execs in
all namespaces. The control only affects _new_ processes, however:
changing it does not affect the vector length of any existing
process.
The intended usage model is that if userspace is known to be fully
SVE-tolerant (or a developer is curious to find out) then this
parameter can be cranked up during system startup.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
arch/arm64/kernel/fpsimd.c | 62 +++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 61 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index cbb2c63..4da64fc 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -36,6 +36,7 @@
#include <linux/sched/signal.h>
#include <linux/signal.h>
#include <linux/slab.h>
+#include <linux/sysctl.h>
#include <asm/fpsimd.h>
#include <asm/cputype.h>
@@ -334,6 +335,65 @@ static unsigned int find_supported_vector_length(unsigned int vl)
return sve_vl_from_vq(bit_to_vq(bit));
}
+#ifdef CONFIG_SYSCTL
+
+static int sve_proc_do_default_vl(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos)
+{
+ int ret;
+ int vl = sve_default_vl;
+ struct ctl_table tmp_table = {
+ .data = &vl,
+ .maxlen = sizeof(vl),
+ };
+
+ ret = proc_dointvec(&tmp_table, write, buffer, lenp, ppos);
+ if (ret || !write)
+ return ret;
+
+ /* Writing -1 has the special meaning "set to max": */
+ if (vl == -1) {
+ /* Fail safe if sve_max_vl wasn't initialised */
+ if (WARN_ON(!sve_vl_valid(sve_max_vl)))
+ vl = SVE_VL_MIN;
+ else
+ vl = sve_max_vl;
+
+ goto chosen;
+ }
+
+ if (!sve_vl_valid(vl))
+ return -EINVAL;
+
+ vl = find_supported_vector_length(vl);
+chosen:
+ sve_default_vl = vl;
+ return 0;
+}
+
+static struct ctl_table sve_default_vl_table[] = {
+ {
+ .procname = "sve_default_vector_length",
+ .mode = 0644,
+ .proc_handler = sve_proc_do_default_vl,
+ },
+ { }
+};
+
+static int __init sve_sysctl_init(void)
+{
+ if (system_supports_sve())
+ if (!register_sysctl("abi", sve_default_vl_table))
+ return -EINVAL;
+
+ return 0;
+}
+
+#else /* ! CONFIG_SYSCTL */
+static int __init sve_sysctl_init(void) { return 0; }
+#endif /* ! CONFIG_SYSCTL */
+
#define ZREG(sve_state, vq, n) ((char *)(sve_state) + \
(SVE_SIG_ZREG_OFFSET(vq, n) - SVE_SIG_REGS_OFFSET))
@@ -1208,6 +1268,6 @@ static int __init fpsimd_init(void)
if (!(elf_hwcap & HWCAP_ASIMD))
pr_notice("Advanced SIMD is not implemented\n");
- return 0;
+ return sve_sysctl_init();
}
core_initcall(fpsimd_init);
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 23/30] arm64/sve: Add sysctl to set the default vector length for new processes
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Because of the effect of SVE on the size of the signal frame, the
default vector length used for new processes involves a tradeoff
between performance of SVE-enabled software on the one hand, and
reliability of non-SVE-aware software on the other hand.
For this reason, the best choice depends on the repertoire of
userspace software in use and is thus best left up to distro
maintainers, sysadmins and developers.
If CONFIG_SYSCTL and CONFIG_PROC_SYSCTL are enabled, this patch
exposes the default vector length in
/proc/sys/abi/sve_default_vector_length, where boot scripts or the
adventurous can poke it.
In common with other arm64 ABI sysctls, this control is currently
global: setting it requires CAP_SYS_ADMIN in the root user
namespace, but the value set is effective for subsequent execs in
all namespaces. The control only affects _new_ processes, however:
changing it does not affect the vector length of any existing
process.
The intended usage model is that if userspace is known to be fully
SVE-tolerant (or a developer is curious to find out) then this
parameter can be cranked up during system startup.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
arch/arm64/kernel/fpsimd.c | 62 +++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 61 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index cbb2c63..4da64fc 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -36,6 +36,7 @@
#include <linux/sched/signal.h>
#include <linux/signal.h>
#include <linux/slab.h>
+#include <linux/sysctl.h>
#include <asm/fpsimd.h>
#include <asm/cputype.h>
@@ -334,6 +335,65 @@ static unsigned int find_supported_vector_length(unsigned int vl)
return sve_vl_from_vq(bit_to_vq(bit));
}
+#ifdef CONFIG_SYSCTL
+
+static int sve_proc_do_default_vl(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos)
+{
+ int ret;
+ int vl = sve_default_vl;
+ struct ctl_table tmp_table = {
+ .data = &vl,
+ .maxlen = sizeof(vl),
+ };
+
+ ret = proc_dointvec(&tmp_table, write, buffer, lenp, ppos);
+ if (ret || !write)
+ return ret;
+
+ /* Writing -1 has the special meaning "set to max": */
+ if (vl == -1) {
+ /* Fail safe if sve_max_vl wasn't initialised */
+ if (WARN_ON(!sve_vl_valid(sve_max_vl)))
+ vl = SVE_VL_MIN;
+ else
+ vl = sve_max_vl;
+
+ goto chosen;
+ }
+
+ if (!sve_vl_valid(vl))
+ return -EINVAL;
+
+ vl = find_supported_vector_length(vl);
+chosen:
+ sve_default_vl = vl;
+ return 0;
+}
+
+static struct ctl_table sve_default_vl_table[] = {
+ {
+ .procname = "sve_default_vector_length",
+ .mode = 0644,
+ .proc_handler = sve_proc_do_default_vl,
+ },
+ { }
+};
+
+static int __init sve_sysctl_init(void)
+{
+ if (system_supports_sve())
+ if (!register_sysctl("abi", sve_default_vl_table))
+ return -EINVAL;
+
+ return 0;
+}
+
+#else /* ! CONFIG_SYSCTL */
+static int __init sve_sysctl_init(void) { return 0; }
+#endif /* ! CONFIG_SYSCTL */
+
#define ZREG(sve_state, vq, n) ((char *)(sve_state) + \
(SVE_SIG_ZREG_OFFSET(vq, n) - SVE_SIG_REGS_OFFSET))
@@ -1208,6 +1268,6 @@ static int __init fpsimd_init(void)
if (!(elf_hwcap & HWCAP_ASIMD))
pr_notice("Advanced SIMD is not implemented\n");
- return 0;
+ return sve_sysctl_init();
}
core_initcall(fpsimd_init);
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 24/30] arm64/sve: KVM: Prevent guests from using SVE
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-arch, Okamoto Takayuki, libc-alpha, Ard Biesheuvel,
Szabolcs Nagy, Catalin Marinas, Will Deacon, kvmarm
Until KVM has full SVE support, guests must not be allowed to
execute SVE instructions.
This patch enables the necessary traps, and also ensures that the
traps are disabled again on exit from the guest so that the host
can still use SVE if it wants to.
On guest exit, high bits of the SVE Zn registers may have been
clobbered as a side-effect the execution of FPSIMD instructions in
the guest. The existing KVM host FPSIMD restore code is not
sufficient to restore these bits, so this patch explicitly marks
the CPU as not containing cached vector state for any task, thus
forcing a reload on the next return to userspace. This is an
interim measure, in advance of adding full SVE awareness to KVM.
This marking of cached vector state in the CPU as invalid is done
using __this_cpu_write(fpsimd_last_state, NULL) in fpsimd.c. Due
to the repeated use of this rather obscure operation, it makes
sense to factor it out as a separate helper with a clearer name.
This patch factors it out as fpsimd_flush_cpu_state(), and ports
all callers to use it.
As a side effect of this refactoring, a this_cpu_write() in
fpsimd_cpu_pm_notifier() is changed to __this_cpu_write(). This
should be fine, since cpu_pm_enter() is supposed to be called only
with interrupts disabled.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
arch/arm/include/asm/kvm_host.h | 3 +++
arch/arm64/include/asm/fpsimd.h | 1 +
arch/arm64/include/asm/kvm_arm.h | 4 +++-
arch/arm64/include/asm/kvm_host.h | 11 +++++++++++
arch/arm64/kernel/fpsimd.c | 31 +++++++++++++++++++++++++++++--
arch/arm64/kvm/hyp/switch.c | 6 +++---
virt/kvm/arm/arm.c | 3 +++
7 files changed, 53 insertions(+), 6 deletions(-)
diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
index 4a879f6..242151e 100644
--- a/arch/arm/include/asm/kvm_host.h
+++ b/arch/arm/include/asm/kvm_host.h
@@ -293,4 +293,7 @@ int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu,
int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu,
struct kvm_device_attr *attr);
+/* All host FP/SIMD state is restored on guest exit, so nothing to save: */
+static inline void kvm_fpsimd_flush_cpu_state(void) {}
+
#endif /* __ARM_KVM_HOST_H__ */
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index b868412..74f3439 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -74,6 +74,7 @@ extern void fpsimd_restore_current_state(void);
extern void fpsimd_update_current_state(struct fpsimd_state *state);
extern void fpsimd_flush_task_state(struct task_struct *target);
+extern void sve_flush_cpu_state(void);
/* Maximum VL that SVE VL-agnostic software can transparently support */
#define SVE_VL_ARCH_MAX 0x100
diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
index dbf0537..7f069ff 100644
--- a/arch/arm64/include/asm/kvm_arm.h
+++ b/arch/arm64/include/asm/kvm_arm.h
@@ -186,7 +186,8 @@
#define CPTR_EL2_TTA (1 << 20)
#define CPTR_EL2_TFP (1 << CPTR_EL2_TFP_SHIFT)
#define CPTR_EL2_TZ (1 << 8)
-#define CPTR_EL2_DEFAULT 0x000033ff
+#define CPTR_EL2_RES1 0x000032ff /* known RES1 bits in CPTR_EL2 */
+#define CPTR_EL2_DEFAULT CPTR_EL2_RES1
/* Hyp Debug Configuration Register bits */
#define MDCR_EL2_TPMS (1 << 14)
@@ -237,5 +238,6 @@
#define CPACR_EL1_FPEN (3 << 20)
#define CPACR_EL1_TTA (1 << 28)
+#define CPACR_EL1_DEFAULT (CPACR_EL1_FPEN | CPACR_EL1_ZEN_EL1EN)
#endif /* __ARM64_KVM_ARM_H__ */
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index e923b58..674912d 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -25,6 +25,7 @@
#include <linux/types.h>
#include <linux/kvm_types.h>
#include <asm/cpufeature.h>
+#include <asm/fpsimd.h>
#include <asm/kvm.h>
#include <asm/kvm_asm.h>
#include <asm/kvm_mmio.h>
@@ -384,4 +385,14 @@ static inline void __cpu_init_stage2(void)
"PARange is %d bits, unsupported configuration!", parange);
}
+/*
+ * All host FP/SIMD state is restored on guest exit, so nothing needs
+ * doing here except in the SVE case:
+*/
+static inline void kvm_fpsimd_flush_cpu_state(void)
+{
+ if (system_supports_sve())
+ sve_flush_cpu_state();
+}
+
#endif /* __ARM64_KVM_HOST_H__ */
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 4da64fc..42fc731 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -1049,6 +1049,33 @@ void fpsimd_flush_task_state(struct task_struct *t)
t->thread.fpsimd_state.cpu = NR_CPUS;
}
+static inline void fpsimd_flush_cpu_state(void)
+{
+ __this_cpu_write(fpsimd_last_state, NULL);
+}
+
+/*
+ * Invalidate any task SVE state currently held in this CPU's regs.
+ *
+ * This is used to prevent the kernel from trying to reuse SVE register data
+ * that is detroyed by KVM guest enter/exit. This function should go away when
+ * KVM SVE support is implemented. Don't use it for anything else.
+ */
+#ifdef CONFIG_ARM64_SVE
+void sve_flush_cpu_state(void)
+{
+ struct fpsimd_state *const fpstate = __this_cpu_read(fpsimd_last_state);
+ struct task_struct *tsk;
+
+ if (!fpstate)
+ return;
+
+ tsk = container_of(fpstate, struct task_struct, thread.fpsimd_state);
+ if (test_tsk_thread_flag(tsk, TIF_SVE))
+ fpsimd_flush_cpu_state();
+}
+#endif /* CONFIG_ARM64_SVE */
+
#ifdef CONFIG_KERNEL_MODE_NEON
DEFINE_PER_CPU(bool, kernel_neon_busy);
@@ -1089,7 +1116,7 @@ void kernel_neon_begin(void)
}
/* Invalidate any task state remaining in the fpsimd regs: */
- __this_cpu_write(fpsimd_last_state, NULL);
+ fpsimd_flush_cpu_state();
preempt_disable();
@@ -1210,7 +1237,7 @@ static int fpsimd_cpu_pm_notifier(struct notifier_block *self,
case CPU_PM_ENTER:
if (current->mm)
task_fpsimd_save();
- this_cpu_write(fpsimd_last_state, NULL);
+ fpsimd_flush_cpu_state();
break;
case CPU_PM_EXIT:
if (current->mm)
diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
index 35a90b8..951f3eb 100644
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -48,7 +48,7 @@ static void __hyp_text __activate_traps_vhe(void)
val = read_sysreg(cpacr_el1);
val |= CPACR_EL1_TTA;
- val &= ~CPACR_EL1_FPEN;
+ val &= ~(CPACR_EL1_FPEN | CPACR_EL1_ZEN);
write_sysreg(val, cpacr_el1);
write_sysreg(__kvm_hyp_vector, vbar_el1);
@@ -59,7 +59,7 @@ static void __hyp_text __activate_traps_nvhe(void)
u64 val;
val = CPTR_EL2_DEFAULT;
- val |= CPTR_EL2_TTA | CPTR_EL2_TFP;
+ val |= CPTR_EL2_TTA | CPTR_EL2_TFP | CPTR_EL2_TZ;
write_sysreg(val, cptr_el2);
}
@@ -117,7 +117,7 @@ static void __hyp_text __deactivate_traps_vhe(void)
write_sysreg(mdcr_el2, mdcr_el2);
write_sysreg(HCR_HOST_VHE_FLAGS, hcr_el2);
- write_sysreg(CPACR_EL1_FPEN, cpacr_el1);
+ write_sysreg(CPACR_EL1_DEFAULT, cpacr_el1);
write_sysreg(vectors, vbar_el1);
}
diff --git a/virt/kvm/arm/arm.c b/virt/kvm/arm/arm.c
index b9f68e4..4d3cf9c 100644
--- a/virt/kvm/arm/arm.c
+++ b/virt/kvm/arm/arm.c
@@ -652,6 +652,9 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
*/
preempt_disable();
+ /* Flush FP/SIMD state that can't survive guest entry/exit */
+ kvm_fpsimd_flush_cpu_state();
+
kvm_pmu_flush_hwstate(vcpu);
kvm_timer_flush_hwstate(vcpu);
--
2.1.4
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 24/30] arm64/sve: KVM: Prevent guests from using SVE
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
Until KVM has full SVE support, guests must not be allowed to
execute SVE instructions.
This patch enables the necessary traps, and also ensures that the
traps are disabled again on exit from the guest so that the host
can still use SVE if it wants to.
On guest exit, high bits of the SVE Zn registers may have been
clobbered as a side-effect the execution of FPSIMD instructions in
the guest. The existing KVM host FPSIMD restore code is not
sufficient to restore these bits, so this patch explicitly marks
the CPU as not containing cached vector state for any task, thus
forcing a reload on the next return to userspace. This is an
interim measure, in advance of adding full SVE awareness to KVM.
This marking of cached vector state in the CPU as invalid is done
using __this_cpu_write(fpsimd_last_state, NULL) in fpsimd.c. Due
to the repeated use of this rather obscure operation, it makes
sense to factor it out as a separate helper with a clearer name.
This patch factors it out as fpsimd_flush_cpu_state(), and ports
all callers to use it.
As a side effect of this refactoring, a this_cpu_write() in
fpsimd_cpu_pm_notifier() is changed to __this_cpu_write(). This
should be fine, since cpu_pm_enter() is supposed to be called only
with interrupts disabled.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
arch/arm/include/asm/kvm_host.h | 3 +++
arch/arm64/include/asm/fpsimd.h | 1 +
arch/arm64/include/asm/kvm_arm.h | 4 +++-
arch/arm64/include/asm/kvm_host.h | 11 +++++++++++
arch/arm64/kernel/fpsimd.c | 31 +++++++++++++++++++++++++++++--
arch/arm64/kvm/hyp/switch.c | 6 +++---
virt/kvm/arm/arm.c | 3 +++
7 files changed, 53 insertions(+), 6 deletions(-)
diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
index 4a879f6..242151e 100644
--- a/arch/arm/include/asm/kvm_host.h
+++ b/arch/arm/include/asm/kvm_host.h
@@ -293,4 +293,7 @@ int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu,
int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu,
struct kvm_device_attr *attr);
+/* All host FP/SIMD state is restored on guest exit, so nothing to save: */
+static inline void kvm_fpsimd_flush_cpu_state(void) {}
+
#endif /* __ARM_KVM_HOST_H__ */
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index b868412..74f3439 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -74,6 +74,7 @@ extern void fpsimd_restore_current_state(void);
extern void fpsimd_update_current_state(struct fpsimd_state *state);
extern void fpsimd_flush_task_state(struct task_struct *target);
+extern void sve_flush_cpu_state(void);
/* Maximum VL that SVE VL-agnostic software can transparently support */
#define SVE_VL_ARCH_MAX 0x100
diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
index dbf0537..7f069ff 100644
--- a/arch/arm64/include/asm/kvm_arm.h
+++ b/arch/arm64/include/asm/kvm_arm.h
@@ -186,7 +186,8 @@
#define CPTR_EL2_TTA (1 << 20)
#define CPTR_EL2_TFP (1 << CPTR_EL2_TFP_SHIFT)
#define CPTR_EL2_TZ (1 << 8)
-#define CPTR_EL2_DEFAULT 0x000033ff
+#define CPTR_EL2_RES1 0x000032ff /* known RES1 bits in CPTR_EL2 */
+#define CPTR_EL2_DEFAULT CPTR_EL2_RES1
/* Hyp Debug Configuration Register bits */
#define MDCR_EL2_TPMS (1 << 14)
@@ -237,5 +238,6 @@
#define CPACR_EL1_FPEN (3 << 20)
#define CPACR_EL1_TTA (1 << 28)
+#define CPACR_EL1_DEFAULT (CPACR_EL1_FPEN | CPACR_EL1_ZEN_EL1EN)
#endif /* __ARM64_KVM_ARM_H__ */
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index e923b58..674912d 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -25,6 +25,7 @@
#include <linux/types.h>
#include <linux/kvm_types.h>
#include <asm/cpufeature.h>
+#include <asm/fpsimd.h>
#include <asm/kvm.h>
#include <asm/kvm_asm.h>
#include <asm/kvm_mmio.h>
@@ -384,4 +385,14 @@ static inline void __cpu_init_stage2(void)
"PARange is %d bits, unsupported configuration!", parange);
}
+/*
+ * All host FP/SIMD state is restored on guest exit, so nothing needs
+ * doing here except in the SVE case:
+*/
+static inline void kvm_fpsimd_flush_cpu_state(void)
+{
+ if (system_supports_sve())
+ sve_flush_cpu_state();
+}
+
#endif /* __ARM64_KVM_HOST_H__ */
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 4da64fc..42fc731 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -1049,6 +1049,33 @@ void fpsimd_flush_task_state(struct task_struct *t)
t->thread.fpsimd_state.cpu = NR_CPUS;
}
+static inline void fpsimd_flush_cpu_state(void)
+{
+ __this_cpu_write(fpsimd_last_state, NULL);
+}
+
+/*
+ * Invalidate any task SVE state currently held in this CPU's regs.
+ *
+ * This is used to prevent the kernel from trying to reuse SVE register data
+ * that is detroyed by KVM guest enter/exit. This function should go away when
+ * KVM SVE support is implemented. Don't use it for anything else.
+ */
+#ifdef CONFIG_ARM64_SVE
+void sve_flush_cpu_state(void)
+{
+ struct fpsimd_state *const fpstate = __this_cpu_read(fpsimd_last_state);
+ struct task_struct *tsk;
+
+ if (!fpstate)
+ return;
+
+ tsk = container_of(fpstate, struct task_struct, thread.fpsimd_state);
+ if (test_tsk_thread_flag(tsk, TIF_SVE))
+ fpsimd_flush_cpu_state();
+}
+#endif /* CONFIG_ARM64_SVE */
+
#ifdef CONFIG_KERNEL_MODE_NEON
DEFINE_PER_CPU(bool, kernel_neon_busy);
@@ -1089,7 +1116,7 @@ void kernel_neon_begin(void)
}
/* Invalidate any task state remaining in the fpsimd regs: */
- __this_cpu_write(fpsimd_last_state, NULL);
+ fpsimd_flush_cpu_state();
preempt_disable();
@@ -1210,7 +1237,7 @@ static int fpsimd_cpu_pm_notifier(struct notifier_block *self,
case CPU_PM_ENTER:
if (current->mm)
task_fpsimd_save();
- this_cpu_write(fpsimd_last_state, NULL);
+ fpsimd_flush_cpu_state();
break;
case CPU_PM_EXIT:
if (current->mm)
diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
index 35a90b8..951f3eb 100644
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -48,7 +48,7 @@ static void __hyp_text __activate_traps_vhe(void)
val = read_sysreg(cpacr_el1);
val |= CPACR_EL1_TTA;
- val &= ~CPACR_EL1_FPEN;
+ val &= ~(CPACR_EL1_FPEN | CPACR_EL1_ZEN);
write_sysreg(val, cpacr_el1);
write_sysreg(__kvm_hyp_vector, vbar_el1);
@@ -59,7 +59,7 @@ static void __hyp_text __activate_traps_nvhe(void)
u64 val;
val = CPTR_EL2_DEFAULT;
- val |= CPTR_EL2_TTA | CPTR_EL2_TFP;
+ val |= CPTR_EL2_TTA | CPTR_EL2_TFP | CPTR_EL2_TZ;
write_sysreg(val, cptr_el2);
}
@@ -117,7 +117,7 @@ static void __hyp_text __deactivate_traps_vhe(void)
write_sysreg(mdcr_el2, mdcr_el2);
write_sysreg(HCR_HOST_VHE_FLAGS, hcr_el2);
- write_sysreg(CPACR_EL1_FPEN, cpacr_el1);
+ write_sysreg(CPACR_EL1_DEFAULT, cpacr_el1);
write_sysreg(vectors, vbar_el1);
}
diff --git a/virt/kvm/arm/arm.c b/virt/kvm/arm/arm.c
index b9f68e4..4d3cf9c 100644
--- a/virt/kvm/arm/arm.c
+++ b/virt/kvm/arm/arm.c
@@ -652,6 +652,9 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
*/
preempt_disable();
+ /* Flush FP/SIMD state that can't survive guest entry/exit */
+ kvm_fpsimd_flush_cpu_state();
+
kvm_pmu_flush_hwstate(vcpu);
kvm_timer_flush_hwstate(vcpu);
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 24/30] arm64/sve: KVM: Prevent guests from using SVE
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Until KVM has full SVE support, guests must not be allowed to
execute SVE instructions.
This patch enables the necessary traps, and also ensures that the
traps are disabled again on exit from the guest so that the host
can still use SVE if it wants to.
On guest exit, high bits of the SVE Zn registers may have been
clobbered as a side-effect the execution of FPSIMD instructions in
the guest. The existing KVM host FPSIMD restore code is not
sufficient to restore these bits, so this patch explicitly marks
the CPU as not containing cached vector state for any task, thus
forcing a reload on the next return to userspace. This is an
interim measure, in advance of adding full SVE awareness to KVM.
This marking of cached vector state in the CPU as invalid is done
using __this_cpu_write(fpsimd_last_state, NULL) in fpsimd.c. Due
to the repeated use of this rather obscure operation, it makes
sense to factor it out as a separate helper with a clearer name.
This patch factors it out as fpsimd_flush_cpu_state(), and ports
all callers to use it.
As a side effect of this refactoring, a this_cpu_write() in
fpsimd_cpu_pm_notifier() is changed to __this_cpu_write(). This
should be fine, since cpu_pm_enter() is supposed to be called only
with interrupts disabled.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
arch/arm/include/asm/kvm_host.h | 3 +++
arch/arm64/include/asm/fpsimd.h | 1 +
arch/arm64/include/asm/kvm_arm.h | 4 +++-
arch/arm64/include/asm/kvm_host.h | 11 +++++++++++
arch/arm64/kernel/fpsimd.c | 31 +++++++++++++++++++++++++++++--
arch/arm64/kvm/hyp/switch.c | 6 +++---
virt/kvm/arm/arm.c | 3 +++
7 files changed, 53 insertions(+), 6 deletions(-)
diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
index 4a879f6..242151e 100644
--- a/arch/arm/include/asm/kvm_host.h
+++ b/arch/arm/include/asm/kvm_host.h
@@ -293,4 +293,7 @@ int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu,
int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu,
struct kvm_device_attr *attr);
+/* All host FP/SIMD state is restored on guest exit, so nothing to save: */
+static inline void kvm_fpsimd_flush_cpu_state(void) {}
+
#endif /* __ARM_KVM_HOST_H__ */
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index b868412..74f3439 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -74,6 +74,7 @@ extern void fpsimd_restore_current_state(void);
extern void fpsimd_update_current_state(struct fpsimd_state *state);
extern void fpsimd_flush_task_state(struct task_struct *target);
+extern void sve_flush_cpu_state(void);
/* Maximum VL that SVE VL-agnostic software can transparently support */
#define SVE_VL_ARCH_MAX 0x100
diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
index dbf0537..7f069ff 100644
--- a/arch/arm64/include/asm/kvm_arm.h
+++ b/arch/arm64/include/asm/kvm_arm.h
@@ -186,7 +186,8 @@
#define CPTR_EL2_TTA (1 << 20)
#define CPTR_EL2_TFP (1 << CPTR_EL2_TFP_SHIFT)
#define CPTR_EL2_TZ (1 << 8)
-#define CPTR_EL2_DEFAULT 0x000033ff
+#define CPTR_EL2_RES1 0x000032ff /* known RES1 bits in CPTR_EL2 */
+#define CPTR_EL2_DEFAULT CPTR_EL2_RES1
/* Hyp Debug Configuration Register bits */
#define MDCR_EL2_TPMS (1 << 14)
@@ -237,5 +238,6 @@
#define CPACR_EL1_FPEN (3 << 20)
#define CPACR_EL1_TTA (1 << 28)
+#define CPACR_EL1_DEFAULT (CPACR_EL1_FPEN | CPACR_EL1_ZEN_EL1EN)
#endif /* __ARM64_KVM_ARM_H__ */
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index e923b58..674912d 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -25,6 +25,7 @@
#include <linux/types.h>
#include <linux/kvm_types.h>
#include <asm/cpufeature.h>
+#include <asm/fpsimd.h>
#include <asm/kvm.h>
#include <asm/kvm_asm.h>
#include <asm/kvm_mmio.h>
@@ -384,4 +385,14 @@ static inline void __cpu_init_stage2(void)
"PARange is %d bits, unsupported configuration!", parange);
}
+/*
+ * All host FP/SIMD state is restored on guest exit, so nothing needs
+ * doing here except in the SVE case:
+*/
+static inline void kvm_fpsimd_flush_cpu_state(void)
+{
+ if (system_supports_sve())
+ sve_flush_cpu_state();
+}
+
#endif /* __ARM64_KVM_HOST_H__ */
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 4da64fc..42fc731 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -1049,6 +1049,33 @@ void fpsimd_flush_task_state(struct task_struct *t)
t->thread.fpsimd_state.cpu = NR_CPUS;
}
+static inline void fpsimd_flush_cpu_state(void)
+{
+ __this_cpu_write(fpsimd_last_state, NULL);
+}
+
+/*
+ * Invalidate any task SVE state currently held in this CPU's regs.
+ *
+ * This is used to prevent the kernel from trying to reuse SVE register data
+ * that is detroyed by KVM guest enter/exit. This function should go away when
+ * KVM SVE support is implemented. Don't use it for anything else.
+ */
+#ifdef CONFIG_ARM64_SVE
+void sve_flush_cpu_state(void)
+{
+ struct fpsimd_state *const fpstate = __this_cpu_read(fpsimd_last_state);
+ struct task_struct *tsk;
+
+ if (!fpstate)
+ return;
+
+ tsk = container_of(fpstate, struct task_struct, thread.fpsimd_state);
+ if (test_tsk_thread_flag(tsk, TIF_SVE))
+ fpsimd_flush_cpu_state();
+}
+#endif /* CONFIG_ARM64_SVE */
+
#ifdef CONFIG_KERNEL_MODE_NEON
DEFINE_PER_CPU(bool, kernel_neon_busy);
@@ -1089,7 +1116,7 @@ void kernel_neon_begin(void)
}
/* Invalidate any task state remaining in the fpsimd regs: */
- __this_cpu_write(fpsimd_last_state, NULL);
+ fpsimd_flush_cpu_state();
preempt_disable();
@@ -1210,7 +1237,7 @@ static int fpsimd_cpu_pm_notifier(struct notifier_block *self,
case CPU_PM_ENTER:
if (current->mm)
task_fpsimd_save();
- this_cpu_write(fpsimd_last_state, NULL);
+ fpsimd_flush_cpu_state();
break;
case CPU_PM_EXIT:
if (current->mm)
diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
index 35a90b8..951f3eb 100644
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -48,7 +48,7 @@ static void __hyp_text __activate_traps_vhe(void)
val = read_sysreg(cpacr_el1);
val |= CPACR_EL1_TTA;
- val &= ~CPACR_EL1_FPEN;
+ val &= ~(CPACR_EL1_FPEN | CPACR_EL1_ZEN);
write_sysreg(val, cpacr_el1);
write_sysreg(__kvm_hyp_vector, vbar_el1);
@@ -59,7 +59,7 @@ static void __hyp_text __activate_traps_nvhe(void)
u64 val;
val = CPTR_EL2_DEFAULT;
- val |= CPTR_EL2_TTA | CPTR_EL2_TFP;
+ val |= CPTR_EL2_TTA | CPTR_EL2_TFP | CPTR_EL2_TZ;
write_sysreg(val, cptr_el2);
}
@@ -117,7 +117,7 @@ static void __hyp_text __deactivate_traps_vhe(void)
write_sysreg(mdcr_el2, mdcr_el2);
write_sysreg(HCR_HOST_VHE_FLAGS, hcr_el2);
- write_sysreg(CPACR_EL1_FPEN, cpacr_el1);
+ write_sysreg(CPACR_EL1_DEFAULT, cpacr_el1);
write_sysreg(vectors, vbar_el1);
}
diff --git a/virt/kvm/arm/arm.c b/virt/kvm/arm/arm.c
index b9f68e4..4d3cf9c 100644
--- a/virt/kvm/arm/arm.c
+++ b/virt/kvm/arm/arm.c
@@ -652,6 +652,9 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
*/
preempt_disable();
+ /* Flush FP/SIMD state that can't survive guest entry/exit */
+ kvm_fpsimd_flush_cpu_state();
+
kvm_pmu_flush_hwstate(vcpu);
kvm_timer_flush_hwstate(vcpu);
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 25/30] arm64/sve: KVM: Treat guest SVE use as undefined instruction execution
2017-10-31 15:50 ` Dave Martin
@ 2017-10-31 15:51 ` Dave Martin
-1 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
When trapping forbidden attempts by a guest to use SVE, we want the
guest to see a trap consistent with SVE not being implemented.
This patch injects an undefined instruction exception into the
guest in response to such an exception.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
---
arch/arm64/kvm/handle_exit.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c
index 7debb74..b712479 100644
--- a/arch/arm64/kvm/handle_exit.c
+++ b/arch/arm64/kvm/handle_exit.c
@@ -147,6 +147,13 @@ static int kvm_handle_unknown_ec(struct kvm_vcpu *vcpu, struct kvm_run *run)
return 1;
}
+static int handle_sve(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+ /* Until SVE is supported for guests: */
+ kvm_inject_undefined(vcpu);
+ return 1;
+}
+
static exit_handle_fn arm_exit_handlers[] = {
[0 ... ESR_ELx_EC_MAX] = kvm_handle_unknown_ec,
[ESR_ELx_EC_WFx] = kvm_handle_wfx,
@@ -160,6 +167,7 @@ static exit_handle_fn arm_exit_handlers[] = {
[ESR_ELx_EC_HVC64] = handle_hvc,
[ESR_ELx_EC_SMC64] = handle_smc,
[ESR_ELx_EC_SYS64] = kvm_handle_sys_reg,
+ [ESR_ELx_EC_SVE] = handle_sve,
[ESR_ELx_EC_IABT_LOW] = kvm_handle_guest_abort,
[ESR_ELx_EC_DABT_LOW] = kvm_handle_guest_abort,
[ESR_ELx_EC_SOFTSTP_LOW]= kvm_handle_guest_debug,
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 25/30] arm64/sve: KVM: Treat guest SVE use as undefined instruction execution
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
When trapping forbidden attempts by a guest to use SVE, we want the
guest to see a trap consistent with SVE not being implemented.
This patch injects an undefined instruction exception into the
guest in response to such an exception.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
---
arch/arm64/kvm/handle_exit.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c
index 7debb74..b712479 100644
--- a/arch/arm64/kvm/handle_exit.c
+++ b/arch/arm64/kvm/handle_exit.c
@@ -147,6 +147,13 @@ static int kvm_handle_unknown_ec(struct kvm_vcpu *vcpu, struct kvm_run *run)
return 1;
}
+static int handle_sve(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+ /* Until SVE is supported for guests: */
+ kvm_inject_undefined(vcpu);
+ return 1;
+}
+
static exit_handle_fn arm_exit_handlers[] = {
[0 ... ESR_ELx_EC_MAX] = kvm_handle_unknown_ec,
[ESR_ELx_EC_WFx] = kvm_handle_wfx,
@@ -160,6 +167,7 @@ static exit_handle_fn arm_exit_handlers[] = {
[ESR_ELx_EC_HVC64] = handle_hvc,
[ESR_ELx_EC_SMC64] = handle_smc,
[ESR_ELx_EC_SYS64] = kvm_handle_sys_reg,
+ [ESR_ELx_EC_SVE] = handle_sve,
[ESR_ELx_EC_IABT_LOW] = kvm_handle_guest_abort,
[ESR_ELx_EC_DABT_LOW] = kvm_handle_guest_abort,
[ESR_ELx_EC_SOFTSTP_LOW]= kvm_handle_guest_debug,
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 26/30] arm64/sve: KVM: Hide SVE from CPU features exposed to guests
2017-10-31 15:50 ` Dave Martin
@ 2017-10-31 15:51 ` Dave Martin
-1 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
KVM guests cannot currently use SVE, because SVE is always
configured to trap to EL2.
However, a guest that sees SVE reported as present in
ID_AA64PFR0_EL1 may legitimately expect that SVE works and try to
use it. Instead of working, the guest will receive an injected
undef exception, which may cause the guest to oops or go into a
spin.
To avoid misleading the guest into believing that SVE will work,
this patch masks out the SVE field from ID_AA64PFR0_EL1 when a
guest attempts to read this register. No support is explicitly
added for ID_AA64ZFR0_EL1 either, so that is still emulated as
reading as zero, which is consistent with SVE not being
implemented.
This is a temporary measure, and will be removed in a later series
when full KVM support for SVE is implemented.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
---
arch/arm64/kvm/sys_regs.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index b1f7552..a0ee9b0 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -23,6 +23,7 @@
#include <linux/bsearch.h>
#include <linux/kvm_host.h>
#include <linux/mm.h>
+#include <linux/printk.h>
#include <linux/uaccess.h>
#include <asm/cacheflush.h>
@@ -897,8 +898,17 @@ static u64 read_id_reg(struct sys_reg_desc const *r, bool raz)
{
u32 id = sys_reg((u32)r->Op0, (u32)r->Op1,
(u32)r->CRn, (u32)r->CRm, (u32)r->Op2);
+ u64 val = raz ? 0 : read_sanitised_ftr_reg(id);
- return raz ? 0 : read_sanitised_ftr_reg(id);
+ if (id == SYS_ID_AA64PFR0_EL1) {
+ if (val & (0xfUL << ID_AA64PFR0_SVE_SHIFT))
+ pr_err_once("kvm [%i]: SVE unsupported for guests, suppressing\n",
+ task_pid_nr(current));
+
+ val &= ~(0xfUL << ID_AA64PFR0_SVE_SHIFT);
+ }
+
+ return val;
}
/* cpufeature ID register access trap handlers */
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 26/30] arm64/sve: KVM: Hide SVE from CPU features exposed to guests
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
KVM guests cannot currently use SVE, because SVE is always
configured to trap to EL2.
However, a guest that sees SVE reported as present in
ID_AA64PFR0_EL1 may legitimately expect that SVE works and try to
use it. Instead of working, the guest will receive an injected
undef exception, which may cause the guest to oops or go into a
spin.
To avoid misleading the guest into believing that SVE will work,
this patch masks out the SVE field from ID_AA64PFR0_EL1 when a
guest attempts to read this register. No support is explicitly
added for ID_AA64ZFR0_EL1 either, so that is still emulated as
reading as zero, which is consistent with SVE not being
implemented.
This is a temporary measure, and will be removed in a later series
when full KVM support for SVE is implemented.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
---
arch/arm64/kvm/sys_regs.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index b1f7552..a0ee9b0 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -23,6 +23,7 @@
#include <linux/bsearch.h>
#include <linux/kvm_host.h>
#include <linux/mm.h>
+#include <linux/printk.h>
#include <linux/uaccess.h>
#include <asm/cacheflush.h>
@@ -897,8 +898,17 @@ static u64 read_id_reg(struct sys_reg_desc const *r, bool raz)
{
u32 id = sys_reg((u32)r->Op0, (u32)r->Op1,
(u32)r->CRn, (u32)r->CRm, (u32)r->Op2);
+ u64 val = raz ? 0 : read_sanitised_ftr_reg(id);
- return raz ? 0 : read_sanitised_ftr_reg(id);
+ if (id == SYS_ID_AA64PFR0_EL1) {
+ if (val & (0xfUL << ID_AA64PFR0_SVE_SHIFT))
+ pr_err_once("kvm [%i]: SVE unsupported for guests, suppressing\n",
+ task_pid_nr(current));
+
+ val &= ~(0xfUL << ID_AA64PFR0_SVE_SHIFT);
+ }
+
+ return val;
}
/* cpufeature ID register access trap handlers */
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 27/30] arm64/sve: Detect SVE and activate runtime support
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-arch, Okamoto Takayuki, libc-alpha, Ard Biesheuvel,
Szabolcs Nagy, Catalin Marinas, Will Deacon, kvmarm
This patch enables detection of hardware SVE support via the
cpufeatures framework, and reports its presence to the kernel and
userspace via the new ARM64_SVE cpucap and HWCAP_SVE hwcap
respectively.
Userspace can also detect SVE using ID_AA64PFR0_EL1, using the
cpufeatures MRS emulation.
When running on hardware that supports SVE, this enables runtime
kernel support for SVE, and allows user tasks to execute SVE
instructions and make of the of the SVE-specific user/kernel
interface extensions implemented by this series.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
Documentation/arm64/cpu-feature-registers.txt | 6 +++++-
Documentation/arm64/elf_hwcaps.txt | 4 ++++
arch/arm64/include/asm/cpucaps.h | 3 ++-
arch/arm64/include/asm/cpufeature.h | 3 ++-
arch/arm64/include/uapi/asm/hwcap.h | 1 +
arch/arm64/kernel/cpufeature.c | 17 +++++++++++++++++
arch/arm64/kernel/cpuinfo.c | 1 +
arch/arm64/kernel/entry.S | 7 ++++---
8 files changed, 36 insertions(+), 6 deletions(-)
diff --git a/Documentation/arm64/cpu-feature-registers.txt b/Documentation/arm64/cpu-feature-registers.txt
index 011ddfc..bd9b3fa 100644
--- a/Documentation/arm64/cpu-feature-registers.txt
+++ b/Documentation/arm64/cpu-feature-registers.txt
@@ -142,7 +142,11 @@ infrastructure:
x--------------------------------------------------x
| Name | bits | visible |
|--------------------------------------------------|
- | RES0 | [63-28] | n |
+ | RES0 | [63-36] | n |
+ |--------------------------------------------------|
+ | SVE | [35-32] | y |
+ |--------------------------------------------------|
+ | RES0 | [31-28] | n |
|--------------------------------------------------|
| GIC | [27-24] | n |
|--------------------------------------------------|
diff --git a/Documentation/arm64/elf_hwcaps.txt b/Documentation/arm64/elf_hwcaps.txt
index 0ba1805..89edba1 100644
--- a/Documentation/arm64/elf_hwcaps.txt
+++ b/Documentation/arm64/elf_hwcaps.txt
@@ -154,3 +154,7 @@ HWCAP_ASIMDDP
HWCAP_SHA512
Functionality implied by ID_AA64ISAR0_EL1.SHA2 == 0b0002.
+
+HWCAP_SVE
+
+ Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001.
diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h
index 8da6216..2ff7c5e 100644
--- a/arch/arm64/include/asm/cpucaps.h
+++ b/arch/arm64/include/asm/cpucaps.h
@@ -40,7 +40,8 @@
#define ARM64_WORKAROUND_858921 19
#define ARM64_WORKAROUND_CAVIUM_30115 20
#define ARM64_HAS_DCPOP 21
+#define ARM64_SVE 22
-#define ARM64_NCAPS 22
+#define ARM64_NCAPS 23
#endif /* __ASM_CPUCAPS_H */
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index 9b27e8c..ac67cfc 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -273,7 +273,8 @@ static inline bool system_uses_ttbr0_pan(void)
static inline bool system_supports_sve(void)
{
- return false;
+ return IS_ENABLED(CONFIG_ARM64_SVE) &&
+ cpus_have_const_cap(ARM64_SVE);
}
/*
diff --git a/arch/arm64/include/uapi/asm/hwcap.h b/arch/arm64/include/uapi/asm/hwcap.h
index a4bad90..6229410 100644
--- a/arch/arm64/include/uapi/asm/hwcap.h
+++ b/arch/arm64/include/uapi/asm/hwcap.h
@@ -41,5 +41,6 @@
#define HWCAP_SM4 (1 << 19)
#define HWCAP_ASIMDDP (1 << 20)
#define HWCAP_SHA512 (1 << 21)
+#define HWCAP_SVE (1 << 22)
#endif /* _UAPI__ASM_HWCAP_H */
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index 2154373..c5ba009 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -145,6 +145,7 @@ static const struct arm64_ftr_bits ftr_id_aa64isar1[] = {
};
static const struct arm64_ftr_bits ftr_id_aa64pfr0[] = {
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_SVE_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_GIC_SHIFT, 4, 0),
S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_ASIMD_SHIFT, 4, ID_AA64PFR0_ASIMD_NI),
S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_FP_SHIFT, 4, ID_AA64PFR0_FP_NI),
@@ -948,6 +949,19 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
.min_field_value = 1,
},
#endif
+#ifdef CONFIG_ARM64_SVE
+ {
+ .desc = "Scalable Vector Extension",
+ .capability = ARM64_SVE,
+ .def_scope = SCOPE_SYSTEM,
+ .sys_reg = SYS_ID_AA64PFR0_EL1,
+ .sign = FTR_UNSIGNED,
+ .field_pos = ID_AA64PFR0_SVE_SHIFT,
+ .min_field_value = ID_AA64PFR0_SVE,
+ .matches = has_cpuid_feature,
+ .enable = sve_kernel_enable,
+ },
+#endif /* CONFIG_ARM64_SVE */
{},
};
@@ -985,6 +999,9 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_JSCVT_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, HWCAP_JSCVT),
HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_FCMA_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, HWCAP_FCMA),
HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_LRCPC_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, HWCAP_LRCPC),
+#ifdef CONFIG_ARM64_SVE
+ HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_SVE_SHIFT, FTR_UNSIGNED, ID_AA64PFR0_SVE, CAP_HWCAP, HWCAP_SVE),
+#endif
{},
};
diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c
index 58da504..1e25545 100644
--- a/arch/arm64/kernel/cpuinfo.c
+++ b/arch/arm64/kernel/cpuinfo.c
@@ -75,6 +75,7 @@ static const char *const hwcap_str[] = {
"sm4",
"asimddp",
"sha512",
+ "sve",
NULL
};
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 56e848f..67522ac 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -853,9 +853,10 @@ el0_svc:
mov wscno, w8 // syscall number in w8
mov wsc_nr, #__NR_syscalls
-#ifndef CONFIG_ARM64_SVE
+#ifdef CONFIG_ARM64_SVE
+alternative_if_not ARM64_SVE
b el0_svc_naked
-#else
+alternative_else_nop_endif
tbz x16, #TIF_SVE, el0_svc_naked // Skip unless TIF_SVE set:
bic x16, x16, #_TIF_SVE // discard SVE state
str x16, [tsk, #TSK_TI_FLAGS]
@@ -870,7 +871,7 @@ el0_svc:
mrs x9, cpacr_el1
bic x9, x9, #CPACR_EL1_ZEN_EL0EN // disable SVE for el0
msr cpacr_el1, x9 // synchronised by eret to el0
-#endif /* CONFIG_ARM64_SVE */
+#endif
el0_svc_naked: // compat entry point
stp x0, xscno, [sp, #S_ORIG_X0] // save the original x0 and syscall number
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 27/30] arm64/sve: Detect SVE and activate runtime support
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
This patch enables detection of hardware SVE support via the
cpufeatures framework, and reports its presence to the kernel and
userspace via the new ARM64_SVE cpucap and HWCAP_SVE hwcap
respectively.
Userspace can also detect SVE using ID_AA64PFR0_EL1, using the
cpufeatures MRS emulation.
When running on hardware that supports SVE, this enables runtime
kernel support for SVE, and allows user tasks to execute SVE
instructions and make of the of the SVE-specific user/kernel
interface extensions implemented by this series.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
Documentation/arm64/cpu-feature-registers.txt | 6 +++++-
Documentation/arm64/elf_hwcaps.txt | 4 ++++
arch/arm64/include/asm/cpucaps.h | 3 ++-
arch/arm64/include/asm/cpufeature.h | 3 ++-
arch/arm64/include/uapi/asm/hwcap.h | 1 +
arch/arm64/kernel/cpufeature.c | 17 +++++++++++++++++
arch/arm64/kernel/cpuinfo.c | 1 +
arch/arm64/kernel/entry.S | 7 ++++---
8 files changed, 36 insertions(+), 6 deletions(-)
diff --git a/Documentation/arm64/cpu-feature-registers.txt b/Documentation/arm64/cpu-feature-registers.txt
index 011ddfc..bd9b3fa 100644
--- a/Documentation/arm64/cpu-feature-registers.txt
+++ b/Documentation/arm64/cpu-feature-registers.txt
@@ -142,7 +142,11 @@ infrastructure:
x--------------------------------------------------x
| Name | bits | visible |
|--------------------------------------------------|
- | RES0 | [63-28] | n |
+ | RES0 | [63-36] | n |
+ |--------------------------------------------------|
+ | SVE | [35-32] | y |
+ |--------------------------------------------------|
+ | RES0 | [31-28] | n |
|--------------------------------------------------|
| GIC | [27-24] | n |
|--------------------------------------------------|
diff --git a/Documentation/arm64/elf_hwcaps.txt b/Documentation/arm64/elf_hwcaps.txt
index 0ba1805..89edba1 100644
--- a/Documentation/arm64/elf_hwcaps.txt
+++ b/Documentation/arm64/elf_hwcaps.txt
@@ -154,3 +154,7 @@ HWCAP_ASIMDDP
HWCAP_SHA512
Functionality implied by ID_AA64ISAR0_EL1.SHA2 == 0b0002.
+
+HWCAP_SVE
+
+ Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001.
diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h
index 8da6216..2ff7c5e 100644
--- a/arch/arm64/include/asm/cpucaps.h
+++ b/arch/arm64/include/asm/cpucaps.h
@@ -40,7 +40,8 @@
#define ARM64_WORKAROUND_858921 19
#define ARM64_WORKAROUND_CAVIUM_30115 20
#define ARM64_HAS_DCPOP 21
+#define ARM64_SVE 22
-#define ARM64_NCAPS 22
+#define ARM64_NCAPS 23
#endif /* __ASM_CPUCAPS_H */
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index 9b27e8c..ac67cfc 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -273,7 +273,8 @@ static inline bool system_uses_ttbr0_pan(void)
static inline bool system_supports_sve(void)
{
- return false;
+ return IS_ENABLED(CONFIG_ARM64_SVE) &&
+ cpus_have_const_cap(ARM64_SVE);
}
/*
diff --git a/arch/arm64/include/uapi/asm/hwcap.h b/arch/arm64/include/uapi/asm/hwcap.h
index a4bad90..6229410 100644
--- a/arch/arm64/include/uapi/asm/hwcap.h
+++ b/arch/arm64/include/uapi/asm/hwcap.h
@@ -41,5 +41,6 @@
#define HWCAP_SM4 (1 << 19)
#define HWCAP_ASIMDDP (1 << 20)
#define HWCAP_SHA512 (1 << 21)
+#define HWCAP_SVE (1 << 22)
#endif /* _UAPI__ASM_HWCAP_H */
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index 2154373..c5ba009 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -145,6 +145,7 @@ static const struct arm64_ftr_bits ftr_id_aa64isar1[] = {
};
static const struct arm64_ftr_bits ftr_id_aa64pfr0[] = {
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_SVE_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_GIC_SHIFT, 4, 0),
S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_ASIMD_SHIFT, 4, ID_AA64PFR0_ASIMD_NI),
S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_FP_SHIFT, 4, ID_AA64PFR0_FP_NI),
@@ -948,6 +949,19 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
.min_field_value = 1,
},
#endif
+#ifdef CONFIG_ARM64_SVE
+ {
+ .desc = "Scalable Vector Extension",
+ .capability = ARM64_SVE,
+ .def_scope = SCOPE_SYSTEM,
+ .sys_reg = SYS_ID_AA64PFR0_EL1,
+ .sign = FTR_UNSIGNED,
+ .field_pos = ID_AA64PFR0_SVE_SHIFT,
+ .min_field_value = ID_AA64PFR0_SVE,
+ .matches = has_cpuid_feature,
+ .enable = sve_kernel_enable,
+ },
+#endif /* CONFIG_ARM64_SVE */
{},
};
@@ -985,6 +999,9 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_JSCVT_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, HWCAP_JSCVT),
HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_FCMA_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, HWCAP_FCMA),
HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_LRCPC_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, HWCAP_LRCPC),
+#ifdef CONFIG_ARM64_SVE
+ HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_SVE_SHIFT, FTR_UNSIGNED, ID_AA64PFR0_SVE, CAP_HWCAP, HWCAP_SVE),
+#endif
{},
};
diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c
index 58da504..1e25545 100644
--- a/arch/arm64/kernel/cpuinfo.c
+++ b/arch/arm64/kernel/cpuinfo.c
@@ -75,6 +75,7 @@ static const char *const hwcap_str[] = {
"sm4",
"asimddp",
"sha512",
+ "sve",
NULL
};
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 56e848f..67522ac 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -853,9 +853,10 @@ el0_svc:
mov wscno, w8 // syscall number in w8
mov wsc_nr, #__NR_syscalls
-#ifndef CONFIG_ARM64_SVE
+#ifdef CONFIG_ARM64_SVE
+alternative_if_not ARM64_SVE
b el0_svc_naked
-#else
+alternative_else_nop_endif
tbz x16, #TIF_SVE, el0_svc_naked // Skip unless TIF_SVE set:
bic x16, x16, #_TIF_SVE // discard SVE state
str x16, [tsk, #TSK_TI_FLAGS]
@@ -870,7 +871,7 @@ el0_svc:
mrs x9, cpacr_el1
bic x9, x9, #CPACR_EL1_ZEN_EL0EN // disable SVE for el0
msr cpacr_el1, x9 // synchronised by eret to el0
-#endif /* CONFIG_ARM64_SVE */
+#endif
el0_svc_naked: // compat entry point
stp x0, xscno, [sp, #S_ORIG_X0] // save the original x0 and syscall number
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 27/30] arm64/sve: Detect SVE and activate runtime support
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
This patch enables detection of hardware SVE support via the
cpufeatures framework, and reports its presence to the kernel and
userspace via the new ARM64_SVE cpucap and HWCAP_SVE hwcap
respectively.
Userspace can also detect SVE using ID_AA64PFR0_EL1, using the
cpufeatures MRS emulation.
When running on hardware that supports SVE, this enables runtime
kernel support for SVE, and allows user tasks to execute SVE
instructions and make of the of the SVE-specific user/kernel
interface extensions implemented by this series.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
Documentation/arm64/cpu-feature-registers.txt | 6 +++++-
Documentation/arm64/elf_hwcaps.txt | 4 ++++
arch/arm64/include/asm/cpucaps.h | 3 ++-
arch/arm64/include/asm/cpufeature.h | 3 ++-
arch/arm64/include/uapi/asm/hwcap.h | 1 +
arch/arm64/kernel/cpufeature.c | 17 +++++++++++++++++
arch/arm64/kernel/cpuinfo.c | 1 +
arch/arm64/kernel/entry.S | 7 ++++---
8 files changed, 36 insertions(+), 6 deletions(-)
diff --git a/Documentation/arm64/cpu-feature-registers.txt b/Documentation/arm64/cpu-feature-registers.txt
index 011ddfc..bd9b3fa 100644
--- a/Documentation/arm64/cpu-feature-registers.txt
+++ b/Documentation/arm64/cpu-feature-registers.txt
@@ -142,7 +142,11 @@ infrastructure:
x--------------------------------------------------x
| Name | bits | visible |
|--------------------------------------------------|
- | RES0 | [63-28] | n |
+ | RES0 | [63-36] | n |
+ |--------------------------------------------------|
+ | SVE | [35-32] | y |
+ |--------------------------------------------------|
+ | RES0 | [31-28] | n |
|--------------------------------------------------|
| GIC | [27-24] | n |
|--------------------------------------------------|
diff --git a/Documentation/arm64/elf_hwcaps.txt b/Documentation/arm64/elf_hwcaps.txt
index 0ba1805..89edba1 100644
--- a/Documentation/arm64/elf_hwcaps.txt
+++ b/Documentation/arm64/elf_hwcaps.txt
@@ -154,3 +154,7 @@ HWCAP_ASIMDDP
HWCAP_SHA512
Functionality implied by ID_AA64ISAR0_EL1.SHA2 == 0b0002.
+
+HWCAP_SVE
+
+ Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001.
diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h
index 8da6216..2ff7c5e 100644
--- a/arch/arm64/include/asm/cpucaps.h
+++ b/arch/arm64/include/asm/cpucaps.h
@@ -40,7 +40,8 @@
#define ARM64_WORKAROUND_858921 19
#define ARM64_WORKAROUND_CAVIUM_30115 20
#define ARM64_HAS_DCPOP 21
+#define ARM64_SVE 22
-#define ARM64_NCAPS 22
+#define ARM64_NCAPS 23
#endif /* __ASM_CPUCAPS_H */
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index 9b27e8c..ac67cfc 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -273,7 +273,8 @@ static inline bool system_uses_ttbr0_pan(void)
static inline bool system_supports_sve(void)
{
- return false;
+ return IS_ENABLED(CONFIG_ARM64_SVE) &&
+ cpus_have_const_cap(ARM64_SVE);
}
/*
diff --git a/arch/arm64/include/uapi/asm/hwcap.h b/arch/arm64/include/uapi/asm/hwcap.h
index a4bad90..6229410 100644
--- a/arch/arm64/include/uapi/asm/hwcap.h
+++ b/arch/arm64/include/uapi/asm/hwcap.h
@@ -41,5 +41,6 @@
#define HWCAP_SM4 (1 << 19)
#define HWCAP_ASIMDDP (1 << 20)
#define HWCAP_SHA512 (1 << 21)
+#define HWCAP_SVE (1 << 22)
#endif /* _UAPI__ASM_HWCAP_H */
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index 2154373..c5ba009 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -145,6 +145,7 @@ static const struct arm64_ftr_bits ftr_id_aa64isar1[] = {
};
static const struct arm64_ftr_bits ftr_id_aa64pfr0[] = {
+ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_SVE_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_GIC_SHIFT, 4, 0),
S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_ASIMD_SHIFT, 4, ID_AA64PFR0_ASIMD_NI),
S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_FP_SHIFT, 4, ID_AA64PFR0_FP_NI),
@@ -948,6 +949,19 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
.min_field_value = 1,
},
#endif
+#ifdef CONFIG_ARM64_SVE
+ {
+ .desc = "Scalable Vector Extension",
+ .capability = ARM64_SVE,
+ .def_scope = SCOPE_SYSTEM,
+ .sys_reg = SYS_ID_AA64PFR0_EL1,
+ .sign = FTR_UNSIGNED,
+ .field_pos = ID_AA64PFR0_SVE_SHIFT,
+ .min_field_value = ID_AA64PFR0_SVE,
+ .matches = has_cpuid_feature,
+ .enable = sve_kernel_enable,
+ },
+#endif /* CONFIG_ARM64_SVE */
{},
};
@@ -985,6 +999,9 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_JSCVT_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, HWCAP_JSCVT),
HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_FCMA_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, HWCAP_FCMA),
HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_LRCPC_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, HWCAP_LRCPC),
+#ifdef CONFIG_ARM64_SVE
+ HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_SVE_SHIFT, FTR_UNSIGNED, ID_AA64PFR0_SVE, CAP_HWCAP, HWCAP_SVE),
+#endif
{},
};
diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c
index 58da504..1e25545 100644
--- a/arch/arm64/kernel/cpuinfo.c
+++ b/arch/arm64/kernel/cpuinfo.c
@@ -75,6 +75,7 @@ static const char *const hwcap_str[] = {
"sm4",
"asimddp",
"sha512",
+ "sve",
NULL
};
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 56e848f..67522ac 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -853,9 +853,10 @@ el0_svc:
mov wscno, w8 // syscall number in w8
mov wsc_nr, #__NR_syscalls
-#ifndef CONFIG_ARM64_SVE
+#ifdef CONFIG_ARM64_SVE
+alternative_if_not ARM64_SVE
b el0_svc_naked
-#else
+alternative_else_nop_endif
tbz x16, #TIF_SVE, el0_svc_naked // Skip unless TIF_SVE set:
bic x16, x16, #_TIF_SVE // discard SVE state
str x16, [tsk, #TSK_TI_FLAGS]
@@ -870,7 +871,7 @@ el0_svc:
mrs x9, cpacr_el1
bic x9, x9, #CPACR_EL1_ZEN_EL0EN // disable SVE for el0
msr cpacr_el1, x9 // synchronised by eret to el0
-#endif /* CONFIG_ARM64_SVE */
+#endif
el0_svc_naked: // compat entry point
stp x0, xscno, [sp, #S_ORIG_X0] // save the original x0 and syscall number
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 28/30] arm64/sve: Add documentation
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki,
kvmarm-FPEHb7Xf0XXUo1n7N8X6UoWGPAHP3yOg,
libc-alpha-9JcytcrH/bA+uJoB2kUjGw,
linux-arch-u79uwXL29TY76Z2rM5mHXA, Alan Hayward, Mark Rutland,
Michael Kerrisk, linux-api-u79uwXL29TY76Z2rM5mHXA
This patch adds basic documentation of the user/kernel interface
provided by the for SVE.
Signed-off-by: Dave Martin <Dave.Martin-5wv7dgnIgG8@public.gmane.org>
Reviewed-by: Catalin Marinas <catalin.marinas-5wv7dgnIgG8@public.gmane.org>
Cc: Alan Hayward <alan.hayward-5wv7dgnIgG8@public.gmane.org>
Cc: Alex Bennée <alex.bennee-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Michael Kerrisk <mtk.manpages-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Szabolcs Nagy <szabolcs.nagy-5wv7dgnIgG8@public.gmane.org>
Cc: linux-api-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
Documentation/arm64/sve.txt | 508 +++++++++++++++++++++++++++++++
arch/arm64/include/uapi/asm/sigcontext.h | 3 +
2 files changed, 511 insertions(+)
create mode 100644 Documentation/arm64/sve.txt
diff --git a/Documentation/arm64/sve.txt b/Documentation/arm64/sve.txt
new file mode 100644
index 0000000..f128f73
--- /dev/null
+++ b/Documentation/arm64/sve.txt
@@ -0,0 +1,508 @@
+ Scalable Vector Extension support for AArch64 Linux
+ ===================================================
+
+Author: Dave Martin <Dave.Martin-5wv7dgnIgG8@public.gmane.org>
+Date: 4 August 2017
+
+This document outlines briefly the interface provided to userspace by Linux in
+order to support use of the ARM Scalable Vector Extension (SVE).
+
+This is an outline of the most important features and issues only and not
+intended to be exhaustive.
+
+This document does not aim to describe the SVE architecture or programmer's
+model. To aid understanding, a minimal description of relevant programmer's
+model features for SVE is included in Appendix A.
+
+
+1. General
+-----------
+
+* SVE registers Z0..Z31, P0..P15 and FFR and the current vector length VL, are
+ tracked per-thread.
+
+* The presence of SVE is reported to userspace via HWCAP_SVE in the aux vector
+ AT_HWCAP entry. Presence of this flag implies the presence of the SVE
+ instructions and registers, and the Linux-specific system interfaces
+ described in this document. SVE is reported in /proc/cpuinfo as "sve".
+
+* Support for the execution of SVE instructions in userspace can also be
+ detected by reading the CPU ID register ID_AA64PFR0_EL1 using an MRS
+ instruction, and checking that the value of the SVE field is nonzero. [3]
+
+ It does not guarantee the presence of the system interfaces described in the
+ following sections: software that needs to verify that those interfaces are
+ present must check for HWCAP_SVE instead.
+
+* Debuggers should restrict themselves to interacting with the target via the
+ NT_ARM_SVE regset. The recommended way of detecting support for this regset
+ is to connect to a target process first and then attempt a
+ ptrace(PTRACE_GETREGSET, pid, NT_ARM_SVE, &iov).
+
+
+2. Vector length terminology
+-----------------------------
+
+The size of an SVE vector (Z) register is referred to as the "vector length".
+
+To avoid confusion about the units used to express vector length, the kernel
+adopts the following conventions:
+
+* Vector length (VL) = size of a Z-register in bytes
+
+* Vector quadwords (VQ) = size of a Z-register in units of 128 bits
+
+(So, VL = 16 * VQ.)
+
+The VQ convention is used where the underlying granularity is important, such
+as in data structure definitions. In most other situations, the VL convention
+is used. This is consistent with the meaning of the "VL" pseudo-register in
+the SVE instruction set architecture.
+
+
+3. System call behaviour
+-------------------------
+
+* On syscall, V0..V31 are preserved (as without SVE). Thus, bits [127:0] of
+ Z0..Z31 are preserved. All other bits of Z0..Z31, and all of P0..P15 and FFR
+ become unspecified on return from a syscall.
+
+* The SVE registers are not used to pass arguments to or receive results from
+ any syscall.
+
+* In practice the affected registers/bits will be preserved or will be replaced
+ with zeros on return from a syscall, but userspace should not make
+ assumptions about this. The kernel behaviour may vary on a case-by-case
+ basis.
+
+* All other SVE state of a thread, including the currently configured vector
+ length, the state of the PR_SVE_VL_INHERIT flag, and the deferred vector
+ length (if any), is preserved across all syscalls, subject to the specific
+ exceptions for execve() described in section 6.
+
+ In particular, on return from a fork() or clone(), the parent and new child
+ process or thread share identical SVE configuration, matching that of the
+ parent before the call.
+
+
+4. Signal handling
+-------------------
+
+* A new signal frame record sve_context encodes the SVE registers on signal
+ delivery. [1]
+
+* This record is supplementary to fpsimd_context. The FPSR and FPCR registers
+ are only present in fpsimd_context. For convenience, the content of V0..V31
+ is duplicated between sve_context and fpsimd_context.
+
+* The signal frame record for SVE always contains basic metadata, in particular
+ the thread's vector length (in sve_context.vl).
+
+* The SVE registers may or may not be included in the record, depending on
+ whether the registers are live for the thread. The registers are present if
+ and only if:
+ sve_context.head.size >= SVE_SIG_CONTEXT_SIZE(sve_vq_from_vl(sve_context.vl)).
+
+* If the registers are present, the remainder of the record has a vl-dependent
+ size and layout. Macros SVE_SIG_* are defined [1] to facilitate access to
+ the members.
+
+* If the SVE context is too big to fit in sigcontext.__reserved[], then extra
+ space is allocated on the stack, an extra_context record is written in
+ __reserved[] referencing this space. sve_context is then written in the
+ extra space. Refer to [1] for further details about this mechanism.
+
+
+5. Signal return
+-----------------
+
+When returning from a signal handler:
+
+* If there is no sve_context record in the signal frame, or if the record is
+ present but contains no register data as desribed in the previous section,
+ then the SVE registers/bits become non-live and take unspecified values.
+
+* If sve_context is present in the signal frame and contains full register
+ data, the SVE registers become live and are populated with the specified
+ data. However, for backward compatibility reasons, bits [127:0] of Z0..Z31
+ are always restored from the corresponding members of fpsimd_context.vregs[]
+ and not from sve_context. The remaining bits are restored from sve_context.
+
+* Inclusion of fpsimd_context in the signal frame remains mandatory,
+ irrespective of whether sve_context is present or not.
+
+* The vector length cannot be changed via signal return. If sve_context.vl in
+ the signal frame does not match the current vector length, the signal return
+ attempt is treated as illegal, resulting in a forced SIGSEGV.
+
+
+6. prctl extensions
+--------------------
+
+Some new prctl() calls are added to allow programs to manage the SVE vector
+length:
+
+prctl(PR_SVE_SET_VL, unsigned long arg)
+
+ Sets the vector length of the calling thread and related flags, where
+ arg == vl | flags. Other threads of the calling process are unaffected.
+
+ vl is the desired vector length, where sve_vl_valid(vl) must be true.
+
+ flags:
+
+ PR_SVE_SET_VL_INHERIT
+
+ Inherit the current vector length across execve(). Otherwise, the
+ vector length is reset to the system default at execve(). (See
+ Section 9.)
+
+ PR_SVE_SET_VL_ONEXEC
+
+ Defer the requested vector length change until the next execve()
+ performed by this thread.
+
+ The effect is equivalent to implicit exceution of the following
+ call immediately after the next execve() (if any) by the thread:
+
+ prctl(PR_SVE_SET_VL, arg & ~PR_SVE_SET_VL_ONEXEC)
+
+ This allows launching of a new program with a different vector
+ length, while avoiding runtime side effects in the caller.
+
+
+ Without PR_SVE_SET_VL_ONEXEC, the requested change takes effect
+ immediately.
+
+
+ Return value: a nonnegative on success, or a negative value on error:
+ EINVAL: SVE not supported, invalid vector length requested, or
+ invalid flags.
+
+
+ On success:
+
+ * Either the calling thread's vector length or the deferred vector length
+ to be applied at the next execve() by the thread (dependent on whether
+ PR_SVE_SET_VL_ONEXEC is present in arg), is set to the largest value
+ supported by the system that is less than or equal to vl. If vl ==
+ SVE_VL_MAX, the value set will be the largest value supported by the
+ system.
+
+ * Any previously outstanding deferred vector length change in the calling
+ thread is cancelled.
+
+ * The returned value describes the resulting configuration, encoded as for
+ PR_SVE_GET_VL. The vector length reported in this value is the new
+ current vector length for this thread if PR_SVE_SET_VL_ONEXEC was not
+ present in arg; otherwise, the reported vector length is the deferred
+ vector length that will be applied at the next execve() by the calling
+ thread.
+
+ * Changing the vector length causes all of P0..P15, FFR and all bits of
+ Z0..V31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become
+ unspecified. Calling PR_SVE_SET_VL with vl equal to the thread's current
+ vector length, or calling PR_SVE_SET_VL with the PR_SVE_SET_VL_ONEXEC
+ flag, does not constitute a change to the vector length for this purpose.
+
+
+prctl(PR_SVE_GET_VL)
+
+ Gets the vector length of the calling thread.
+
+ The following flag may be OR-ed into the result:
+
+ PR_SVE_SET_VL_INHERIT
+
+ Vector length will be inherited across execve().
+
+ There is no way to determine whether there is an outstanding deferred
+ vector length change (which would only normally be the case between a
+ fork() or vfork() and the corresponding execve() in typical use).
+
+ To extract the vector length from the result, and it with
+ PR_SVE_VL_LEN_MASK.
+
+ Return value: a nonnegative value on success, or a negative value on error:
+ EINVAL: SVE not supported.
+
+
+7. ptrace extensions
+---------------------
+
+* A new regset NT_ARM_SVE is defined for use with PTRACE_GETREGSET and
+ PTRACE_SETREGSET.
+
+ Refer to [2] for definitions.
+
+The regset data starts with struct user_sve_header, containing:
+
+ size
+
+ Size of the complete regset, in bytes.
+ This depends on vl and possibly on other things in the future.
+
+ If a call to PTRACE_GETREGSET requests less data than the value of
+ size, the caller can allocate a larger buffer and retry in order to
+ read the complete regset.
+
+ max_size
+
+ Maximum size in bytes that the regset can grow to for the target
+ thread. The regset won't grow bigger than this even if the target
+ thread changes its vector length etc.
+
+ vl
+
+ Target thread's current vector length, in bytes.
+
+ max_vl
+
+ Maximum possible vector length for the target thread.
+
+ flags
+
+ either
+
+ SVE_PT_REGS_FPSIMD
+
+ SVE registers are not live (GETREGSET) or are to be made
+ non-live (SETREGSET).
+
+ The payload is of type struct user_fpsimd_state, with the same
+ meaning as for NT_PRFPREG, starting at offset
+ SVE_PT_FPSIMD_OFFSET from the start of user_sve_header.
+
+ Extra data might be appended in the future: the size of the
+ payload should be obtained using SVE_PT_FPSIMD_SIZE(vq, flags).
+
+ vq should be obtained using sve_vq_from_vl(vl).
+
+ or
+
+ SVE_PT_REGS_SVE
+
+ SVE registers are live (GETREGSET) or are to be made live
+ (SETREGSET).
+
+ The payload contains the SVE register data, starting at offset
+ SVE_PT_SVE_OFFSET from the start of user_sve_header, and with
+ size SVE_PT_SVE_SIZE(vq, flags);
+
+ ... OR-ed with zero or more of the following flags, which have the same
+ meaning and behaviour as the corresponding PR_SET_VL_* flags:
+
+ SVE_PT_VL_INHERIT
+
+ SVE_PT_VL_ONEXEC (SETREGSET only).
+
+* The effects of changing the vector length and/or flags are equivalent to
+ those documented for PR_SVE_SET_VL.
+
+ The caller must make a further GETREGSET call if it needs to know what VL is
+ actually set by SETREGSET, unless is it known in advance that the requested
+ VL is supported.
+
+* In the SVE_PT_REGS_SVE case, the size and layout of the payload depends on
+ the header fields. The SVE_PT_SVE_*() macros are provided to facilitate
+ access to the members.
+
+* In either case, for SETREGSET it is permissible to omit the payload, in which
+ case only the vector length and flags are changed (along with any
+ consequences of those changes).
+
+* For SETREGSET, if an SVE_PT_REGS_SVE payload is present and the
+ requested VL is not supported, the effect will be the same as if the
+ payload were omitted, except that an EIO error is reported. No
+ attempt is made to translate the payload data to the correct layout
+ for the vector length actually set. The thread's FPSIMD state is
+ preserved, but the remaining bits of the SVE registers become
+ unspecified. It is up to the caller to translate the payload layout
+ for the actual VL and retry.
+
+* The effect of writing a partial, incomplete payload is unspecified.
+
+
+8. ELF coredump extensions
+---------------------------
+
+* A NT_ARM_SVE note will be added to each coredump for each thread of the
+ dumped process. The contents will be equivalent to the data that would have
+ been read if a PTRACE_GETREGSET of NT_ARM_SVE were executed for each thread
+ when the coredump was generated.
+
+
+9. System runtime configuration
+--------------------------------
+
+* To mitigate the ABI impact of expansion of the signal frame, a policy
+ mechanism is provided for administrators, distro maintainers and developers
+ to set the default vector length for userspace processes:
+
+/proc/sys/abi/sve_default_vector_length
+
+ Writing the text representation of an integer to this file sets the system
+ default vector length to the specified value, unless the value is greater
+ than the maximum vector length supported by the system in which case the
+ default vector length is set to that maximum.
+
+ The result can be determined by reopening the file and reading its
+ contents.
+
+ At boot, the default vector length is initially set to 64 or the maximum
+ supported vector length, whichever is smaller. This determines the initial
+ vector length of the init process (PID 1).
+
+ Reading this file returns the current system default vector length.
+
+* At every execve() call, the new vector length of the new process is set to
+ the system default vector length, unless
+
+ * PR_SVE_SET_VL_INHERIT (or equivalently SVE_PT_VL_INHERIT) is set for the
+ calling thread, or
+
+ * a deferred vector length change is pending, established via the
+ PR_SVE_SET_VL_ONEXEC flag (or SVE_PT_VL_ONEXEC).
+
+* Modifying the system default vector length does not affect the vector length
+ of any existing process or thread that does not make an execve() call.
+
+
+Appendix A. SVE programmer's model (informative)
+=================================================
+
+This section provides a minimal description of the additions made by SVE to the
+ARMv8-A programmer's model that are relevant to this document.
+
+Note: This section is for information only and not intended to be complete or
+to replace any architectural specification.
+
+A.1. Registers
+---------------
+
+In A64 state, SVE adds the following:
+
+* 32 8VL-bit vector registers Z0..Z31
+ For each Zn, Zn bits [127:0] alias the ARMv8-A vector register Vn.
+
+ A register write using a Vn register name zeros all bits of the corresponding
+ Zn except for bits [127:0].
+
+* 16 VL-bit predicate registers P0..P15
+
+* 1 VL-bit special-purpose predicate register FFR (the "first-fault register")
+
+* a VL "pseudo-register" that determines the size of each vector register
+
+ The SVE instruction set architecture provides no way to write VL directly.
+ Instead, it can be modified only by EL1 and above, by writing appropriate
+ system registers.
+
+* The value of VL can be configured at runtime by EL1 and above:
+ 16 <= VL <= VLmax, where VL must be a multiple of 16.
+
+* The maximum vector length is determined by the hardware:
+ 16 <= VLmax <= 256.
+
+ (The SVE architecture specifies 256, but permits future architecture
+ revisions to raise this limit.)
+
+* FPSR and FPCR are retained from ARMv8-A, and interact with SVE floating-point
+ operations in a similar way to the way in which they interact with ARMv8
+ floating-point operations.
+
+ 8VL-1 128 0 bit index
+ +---- //// -----------------+
+ Z0 | : V0 |
+ : :
+ Z7 | : V7 |
+ Z8 | : * V8 |
+ : : :
+ Z15 | : *V15 |
+ Z16 | : V16 |
+ : :
+ Z31 | : V31 |
+ +---- //// -----------------+
+ 31 0
+ VL-1 0 +-------+
+ +---- //// --+ FPSR | |
+ P0 | | +-------+
+ : | | *FPCR | |
+ P15 | | +-------+
+ +---- //// --+
+ FFR | | +-----+
+ +---- //// --+ VL | |
+ +-----+
+
+(*) callee-save:
+ This only applies to bits [63:0] of Z-/V-registers.
+ FPCR contains callee-save and caller-save bits. See [4] for details.
+
+
+A.2. Procedure call standard
+-----------------------------
+
+The ARMv8-A base procedure call standard is extended as follows with respect to
+the additional SVE register state:
+
+* All SVE register bits that are not shared with FP/SIMD are caller-save.
+
+* Z8 bits [63:0] .. Z15 bits [63:0] are callee-save.
+
+ This follows from the way these bits are mapped to V8..V15, which are caller-
+ save in the base procedure call standard.
+
+
+Appendix B. ARMv8-A FP/SIMD programmer's model
+===============================================
+
+Note: This section is for information only and not intended to be complete or
+to replace any architectural specification.
+
+Refer to [4] for for more information.
+
+ARMv8-A defines the following floating-point / SIMD register state:
+
+* 32 128-bit vector registers V0..V31
+* 2 32-bit status/control registers FPSR, FPCR
+
+ 127 0 bit index
+ +---------------+
+ V0 | |
+ : : :
+ V7 | |
+ * V8 | |
+ : : : :
+ *V15 | |
+ V16 | |
+ : : :
+ V31 | |
+ +---------------+
+
+ 31 0
+ +-------+
+ FPSR | |
+ +-------+
+ *FPCR | |
+ +-------+
+
+(*) callee-save:
+ This only applies to bits [63:0] of V-registers.
+ FPCR contains a mixture of callee-save and caller-save bits.
+
+
+References
+==========
+
+[1] arch/arm64/include/uapi/asm/sigcontext.h
+ AArch64 Linux signal ABI definitions
+
+[2] arch/arm64/include/uapi/asm/ptrace.h
+ AArch64 Linux ptrace ABI definitions
+
+[3] linux/Documentation/arm64/cpu-feature-registers.txt
+
+[4] ARM IHI0055C
+ http://infocenter.arm.com/help/topic/com.arm.doc.ihi0055c/IHI0055C_beta_aapcs64.pdf
+ http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html
+ Procedure Call Standard for the ARM 64-bit Architecture (AArch64)
diff --git a/arch/arm64/include/uapi/asm/sigcontext.h b/arch/arm64/include/uapi/asm/sigcontext.h
index 7654a81..3c0b484 100644
--- a/arch/arm64/include/uapi/asm/sigcontext.h
+++ b/arch/arm64/include/uapi/asm/sigcontext.h
@@ -133,6 +133,9 @@ struct sve_context {
* The SVE architecture leaves space for future expansion of the
* vector length beyond its initial architectural limit of 2048 bits
* (16 quadwords).
+ *
+ * See linux/Documentation/arm64/sve.txt for a description of the VL/VQ
+ * terminology.
*/
#define SVE_VQ_BYTES 16 /* number of bytes per quadword */
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 28/30] arm64/sve: Add documentation
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch,
Alan Hayward, Mark Rutland, Michael Kerrisk, linux-api
This patch adds basic documentation of the user/kernel interface
provided by the for SVE.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alan Hayward <alan.hayward@arm.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Szabolcs Nagy <szabolcs.nagy@arm.com>
Cc: linux-api@vger.kernel.org
---
Documentation/arm64/sve.txt | 508 +++++++++++++++++++++++++++++++
arch/arm64/include/uapi/asm/sigcontext.h | 3 +
2 files changed, 511 insertions(+)
create mode 100644 Documentation/arm64/sve.txt
diff --git a/Documentation/arm64/sve.txt b/Documentation/arm64/sve.txt
new file mode 100644
index 0000000..f128f73
--- /dev/null
+++ b/Documentation/arm64/sve.txt
@@ -0,0 +1,508 @@
+ Scalable Vector Extension support for AArch64 Linux
+ ===================================================
+
+Author: Dave Martin <Dave.Martin@arm.com>
+Date: 4 August 2017
+
+This document outlines briefly the interface provided to userspace by Linux in
+order to support use of the ARM Scalable Vector Extension (SVE).
+
+This is an outline of the most important features and issues only and not
+intended to be exhaustive.
+
+This document does not aim to describe the SVE architecture or programmer's
+model. To aid understanding, a minimal description of relevant programmer's
+model features for SVE is included in Appendix A.
+
+
+1. General
+-----------
+
+* SVE registers Z0..Z31, P0..P15 and FFR and the current vector length VL, are
+ tracked per-thread.
+
+* The presence of SVE is reported to userspace via HWCAP_SVE in the aux vector
+ AT_HWCAP entry. Presence of this flag implies the presence of the SVE
+ instructions and registers, and the Linux-specific system interfaces
+ described in this document. SVE is reported in /proc/cpuinfo as "sve".
+
+* Support for the execution of SVE instructions in userspace can also be
+ detected by reading the CPU ID register ID_AA64PFR0_EL1 using an MRS
+ instruction, and checking that the value of the SVE field is nonzero. [3]
+
+ It does not guarantee the presence of the system interfaces described in the
+ following sections: software that needs to verify that those interfaces are
+ present must check for HWCAP_SVE instead.
+
+* Debuggers should restrict themselves to interacting with the target via the
+ NT_ARM_SVE regset. The recommended way of detecting support for this regset
+ is to connect to a target process first and then attempt a
+ ptrace(PTRACE_GETREGSET, pid, NT_ARM_SVE, &iov).
+
+
+2. Vector length terminology
+-----------------------------
+
+The size of an SVE vector (Z) register is referred to as the "vector length".
+
+To avoid confusion about the units used to express vector length, the kernel
+adopts the following conventions:
+
+* Vector length (VL) = size of a Z-register in bytes
+
+* Vector quadwords (VQ) = size of a Z-register in units of 128 bits
+
+(So, VL = 16 * VQ.)
+
+The VQ convention is used where the underlying granularity is important, such
+as in data structure definitions. In most other situations, the VL convention
+is used. This is consistent with the meaning of the "VL" pseudo-register in
+the SVE instruction set architecture.
+
+
+3. System call behaviour
+-------------------------
+
+* On syscall, V0..V31 are preserved (as without SVE). Thus, bits [127:0] of
+ Z0..Z31 are preserved. All other bits of Z0..Z31, and all of P0..P15 and FFR
+ become unspecified on return from a syscall.
+
+* The SVE registers are not used to pass arguments to or receive results from
+ any syscall.
+
+* In practice the affected registers/bits will be preserved or will be replaced
+ with zeros on return from a syscall, but userspace should not make
+ assumptions about this. The kernel behaviour may vary on a case-by-case
+ basis.
+
+* All other SVE state of a thread, including the currently configured vector
+ length, the state of the PR_SVE_VL_INHERIT flag, and the deferred vector
+ length (if any), is preserved across all syscalls, subject to the specific
+ exceptions for execve() described in section 6.
+
+ In particular, on return from a fork() or clone(), the parent and new child
+ process or thread share identical SVE configuration, matching that of the
+ parent before the call.
+
+
+4. Signal handling
+-------------------
+
+* A new signal frame record sve_context encodes the SVE registers on signal
+ delivery. [1]
+
+* This record is supplementary to fpsimd_context. The FPSR and FPCR registers
+ are only present in fpsimd_context. For convenience, the content of V0..V31
+ is duplicated between sve_context and fpsimd_context.
+
+* The signal frame record for SVE always contains basic metadata, in particular
+ the thread's vector length (in sve_context.vl).
+
+* The SVE registers may or may not be included in the record, depending on
+ whether the registers are live for the thread. The registers are present if
+ and only if:
+ sve_context.head.size >= SVE_SIG_CONTEXT_SIZE(sve_vq_from_vl(sve_context.vl)).
+
+* If the registers are present, the remainder of the record has a vl-dependent
+ size and layout. Macros SVE_SIG_* are defined [1] to facilitate access to
+ the members.
+
+* If the SVE context is too big to fit in sigcontext.__reserved[], then extra
+ space is allocated on the stack, an extra_context record is written in
+ __reserved[] referencing this space. sve_context is then written in the
+ extra space. Refer to [1] for further details about this mechanism.
+
+
+5. Signal return
+-----------------
+
+When returning from a signal handler:
+
+* If there is no sve_context record in the signal frame, or if the record is
+ present but contains no register data as desribed in the previous section,
+ then the SVE registers/bits become non-live and take unspecified values.
+
+* If sve_context is present in the signal frame and contains full register
+ data, the SVE registers become live and are populated with the specified
+ data. However, for backward compatibility reasons, bits [127:0] of Z0..Z31
+ are always restored from the corresponding members of fpsimd_context.vregs[]
+ and not from sve_context. The remaining bits are restored from sve_context.
+
+* Inclusion of fpsimd_context in the signal frame remains mandatory,
+ irrespective of whether sve_context is present or not.
+
+* The vector length cannot be changed via signal return. If sve_context.vl in
+ the signal frame does not match the current vector length, the signal return
+ attempt is treated as illegal, resulting in a forced SIGSEGV.
+
+
+6. prctl extensions
+--------------------
+
+Some new prctl() calls are added to allow programs to manage the SVE vector
+length:
+
+prctl(PR_SVE_SET_VL, unsigned long arg)
+
+ Sets the vector length of the calling thread and related flags, where
+ arg == vl | flags. Other threads of the calling process are unaffected.
+
+ vl is the desired vector length, where sve_vl_valid(vl) must be true.
+
+ flags:
+
+ PR_SVE_SET_VL_INHERIT
+
+ Inherit the current vector length across execve(). Otherwise, the
+ vector length is reset to the system default at execve(). (See
+ Section 9.)
+
+ PR_SVE_SET_VL_ONEXEC
+
+ Defer the requested vector length change until the next execve()
+ performed by this thread.
+
+ The effect is equivalent to implicit exceution of the following
+ call immediately after the next execve() (if any) by the thread:
+
+ prctl(PR_SVE_SET_VL, arg & ~PR_SVE_SET_VL_ONEXEC)
+
+ This allows launching of a new program with a different vector
+ length, while avoiding runtime side effects in the caller.
+
+
+ Without PR_SVE_SET_VL_ONEXEC, the requested change takes effect
+ immediately.
+
+
+ Return value: a nonnegative on success, or a negative value on error:
+ EINVAL: SVE not supported, invalid vector length requested, or
+ invalid flags.
+
+
+ On success:
+
+ * Either the calling thread's vector length or the deferred vector length
+ to be applied at the next execve() by the thread (dependent on whether
+ PR_SVE_SET_VL_ONEXEC is present in arg), is set to the largest value
+ supported by the system that is less than or equal to vl. If vl ==
+ SVE_VL_MAX, the value set will be the largest value supported by the
+ system.
+
+ * Any previously outstanding deferred vector length change in the calling
+ thread is cancelled.
+
+ * The returned value describes the resulting configuration, encoded as for
+ PR_SVE_GET_VL. The vector length reported in this value is the new
+ current vector length for this thread if PR_SVE_SET_VL_ONEXEC was not
+ present in arg; otherwise, the reported vector length is the deferred
+ vector length that will be applied at the next execve() by the calling
+ thread.
+
+ * Changing the vector length causes all of P0..P15, FFR and all bits of
+ Z0..V31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become
+ unspecified. Calling PR_SVE_SET_VL with vl equal to the thread's current
+ vector length, or calling PR_SVE_SET_VL with the PR_SVE_SET_VL_ONEXEC
+ flag, does not constitute a change to the vector length for this purpose.
+
+
+prctl(PR_SVE_GET_VL)
+
+ Gets the vector length of the calling thread.
+
+ The following flag may be OR-ed into the result:
+
+ PR_SVE_SET_VL_INHERIT
+
+ Vector length will be inherited across execve().
+
+ There is no way to determine whether there is an outstanding deferred
+ vector length change (which would only normally be the case between a
+ fork() or vfork() and the corresponding execve() in typical use).
+
+ To extract the vector length from the result, and it with
+ PR_SVE_VL_LEN_MASK.
+
+ Return value: a nonnegative value on success, or a negative value on error:
+ EINVAL: SVE not supported.
+
+
+7. ptrace extensions
+---------------------
+
+* A new regset NT_ARM_SVE is defined for use with PTRACE_GETREGSET and
+ PTRACE_SETREGSET.
+
+ Refer to [2] for definitions.
+
+The regset data starts with struct user_sve_header, containing:
+
+ size
+
+ Size of the complete regset, in bytes.
+ This depends on vl and possibly on other things in the future.
+
+ If a call to PTRACE_GETREGSET requests less data than the value of
+ size, the caller can allocate a larger buffer and retry in order to
+ read the complete regset.
+
+ max_size
+
+ Maximum size in bytes that the regset can grow to for the target
+ thread. The regset won't grow bigger than this even if the target
+ thread changes its vector length etc.
+
+ vl
+
+ Target thread's current vector length, in bytes.
+
+ max_vl
+
+ Maximum possible vector length for the target thread.
+
+ flags
+
+ either
+
+ SVE_PT_REGS_FPSIMD
+
+ SVE registers are not live (GETREGSET) or are to be made
+ non-live (SETREGSET).
+
+ The payload is of type struct user_fpsimd_state, with the same
+ meaning as for NT_PRFPREG, starting at offset
+ SVE_PT_FPSIMD_OFFSET from the start of user_sve_header.
+
+ Extra data might be appended in the future: the size of the
+ payload should be obtained using SVE_PT_FPSIMD_SIZE(vq, flags).
+
+ vq should be obtained using sve_vq_from_vl(vl).
+
+ or
+
+ SVE_PT_REGS_SVE
+
+ SVE registers are live (GETREGSET) or are to be made live
+ (SETREGSET).
+
+ The payload contains the SVE register data, starting at offset
+ SVE_PT_SVE_OFFSET from the start of user_sve_header, and with
+ size SVE_PT_SVE_SIZE(vq, flags);
+
+ ... OR-ed with zero or more of the following flags, which have the same
+ meaning and behaviour as the corresponding PR_SET_VL_* flags:
+
+ SVE_PT_VL_INHERIT
+
+ SVE_PT_VL_ONEXEC (SETREGSET only).
+
+* The effects of changing the vector length and/or flags are equivalent to
+ those documented for PR_SVE_SET_VL.
+
+ The caller must make a further GETREGSET call if it needs to know what VL is
+ actually set by SETREGSET, unless is it known in advance that the requested
+ VL is supported.
+
+* In the SVE_PT_REGS_SVE case, the size and layout of the payload depends on
+ the header fields. The SVE_PT_SVE_*() macros are provided to facilitate
+ access to the members.
+
+* In either case, for SETREGSET it is permissible to omit the payload, in which
+ case only the vector length and flags are changed (along with any
+ consequences of those changes).
+
+* For SETREGSET, if an SVE_PT_REGS_SVE payload is present and the
+ requested VL is not supported, the effect will be the same as if the
+ payload were omitted, except that an EIO error is reported. No
+ attempt is made to translate the payload data to the correct layout
+ for the vector length actually set. The thread's FPSIMD state is
+ preserved, but the remaining bits of the SVE registers become
+ unspecified. It is up to the caller to translate the payload layout
+ for the actual VL and retry.
+
+* The effect of writing a partial, incomplete payload is unspecified.
+
+
+8. ELF coredump extensions
+---------------------------
+
+* A NT_ARM_SVE note will be added to each coredump for each thread of the
+ dumped process. The contents will be equivalent to the data that would have
+ been read if a PTRACE_GETREGSET of NT_ARM_SVE were executed for each thread
+ when the coredump was generated.
+
+
+9. System runtime configuration
+--------------------------------
+
+* To mitigate the ABI impact of expansion of the signal frame, a policy
+ mechanism is provided for administrators, distro maintainers and developers
+ to set the default vector length for userspace processes:
+
+/proc/sys/abi/sve_default_vector_length
+
+ Writing the text representation of an integer to this file sets the system
+ default vector length to the specified value, unless the value is greater
+ than the maximum vector length supported by the system in which case the
+ default vector length is set to that maximum.
+
+ The result can be determined by reopening the file and reading its
+ contents.
+
+ At boot, the default vector length is initially set to 64 or the maximum
+ supported vector length, whichever is smaller. This determines the initial
+ vector length of the init process (PID 1).
+
+ Reading this file returns the current system default vector length.
+
+* At every execve() call, the new vector length of the new process is set to
+ the system default vector length, unless
+
+ * PR_SVE_SET_VL_INHERIT (or equivalently SVE_PT_VL_INHERIT) is set for the
+ calling thread, or
+
+ * a deferred vector length change is pending, established via the
+ PR_SVE_SET_VL_ONEXEC flag (or SVE_PT_VL_ONEXEC).
+
+* Modifying the system default vector length does not affect the vector length
+ of any existing process or thread that does not make an execve() call.
+
+
+Appendix A. SVE programmer's model (informative)
+=================================================
+
+This section provides a minimal description of the additions made by SVE to the
+ARMv8-A programmer's model that are relevant to this document.
+
+Note: This section is for information only and not intended to be complete or
+to replace any architectural specification.
+
+A.1. Registers
+---------------
+
+In A64 state, SVE adds the following:
+
+* 32 8VL-bit vector registers Z0..Z31
+ For each Zn, Zn bits [127:0] alias the ARMv8-A vector register Vn.
+
+ A register write using a Vn register name zeros all bits of the corresponding
+ Zn except for bits [127:0].
+
+* 16 VL-bit predicate registers P0..P15
+
+* 1 VL-bit special-purpose predicate register FFR (the "first-fault register")
+
+* a VL "pseudo-register" that determines the size of each vector register
+
+ The SVE instruction set architecture provides no way to write VL directly.
+ Instead, it can be modified only by EL1 and above, by writing appropriate
+ system registers.
+
+* The value of VL can be configured at runtime by EL1 and above:
+ 16 <= VL <= VLmax, where VL must be a multiple of 16.
+
+* The maximum vector length is determined by the hardware:
+ 16 <= VLmax <= 256.
+
+ (The SVE architecture specifies 256, but permits future architecture
+ revisions to raise this limit.)
+
+* FPSR and FPCR are retained from ARMv8-A, and interact with SVE floating-point
+ operations in a similar way to the way in which they interact with ARMv8
+ floating-point operations.
+
+ 8VL-1 128 0 bit index
+ +---- //// -----------------+
+ Z0 | : V0 |
+ : :
+ Z7 | : V7 |
+ Z8 | : * V8 |
+ : : :
+ Z15 | : *V15 |
+ Z16 | : V16 |
+ : :
+ Z31 | : V31 |
+ +---- //// -----------------+
+ 31 0
+ VL-1 0 +-------+
+ +---- //// --+ FPSR | |
+ P0 | | +-------+
+ : | | *FPCR | |
+ P15 | | +-------+
+ +---- //// --+
+ FFR | | +-----+
+ +---- //// --+ VL | |
+ +-----+
+
+(*) callee-save:
+ This only applies to bits [63:0] of Z-/V-registers.
+ FPCR contains callee-save and caller-save bits. See [4] for details.
+
+
+A.2. Procedure call standard
+-----------------------------
+
+The ARMv8-A base procedure call standard is extended as follows with respect to
+the additional SVE register state:
+
+* All SVE register bits that are not shared with FP/SIMD are caller-save.
+
+* Z8 bits [63:0] .. Z15 bits [63:0] are callee-save.
+
+ This follows from the way these bits are mapped to V8..V15, which are caller-
+ save in the base procedure call standard.
+
+
+Appendix B. ARMv8-A FP/SIMD programmer's model
+===============================================
+
+Note: This section is for information only and not intended to be complete or
+to replace any architectural specification.
+
+Refer to [4] for for more information.
+
+ARMv8-A defines the following floating-point / SIMD register state:
+
+* 32 128-bit vector registers V0..V31
+* 2 32-bit status/control registers FPSR, FPCR
+
+ 127 0 bit index
+ +---------------+
+ V0 | |
+ : : :
+ V7 | |
+ * V8 | |
+ : : : :
+ *V15 | |
+ V16 | |
+ : : :
+ V31 | |
+ +---------------+
+
+ 31 0
+ +-------+
+ FPSR | |
+ +-------+
+ *FPCR | |
+ +-------+
+
+(*) callee-save:
+ This only applies to bits [63:0] of V-registers.
+ FPCR contains a mixture of callee-save and caller-save bits.
+
+
+References
+==========
+
+[1] arch/arm64/include/uapi/asm/sigcontext.h
+ AArch64 Linux signal ABI definitions
+
+[2] arch/arm64/include/uapi/asm/ptrace.h
+ AArch64 Linux ptrace ABI definitions
+
+[3] linux/Documentation/arm64/cpu-feature-registers.txt
+
+[4] ARM IHI0055C
+ http://infocenter.arm.com/help/topic/com.arm.doc.ihi0055c/IHI0055C_beta_aapcs64.pdf
+ http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html
+ Procedure Call Standard for the ARM 64-bit Architecture (AArch64)
diff --git a/arch/arm64/include/uapi/asm/sigcontext.h b/arch/arm64/include/uapi/asm/sigcontext.h
index 7654a81..3c0b484 100644
--- a/arch/arm64/include/uapi/asm/sigcontext.h
+++ b/arch/arm64/include/uapi/asm/sigcontext.h
@@ -133,6 +133,9 @@ struct sve_context {
* The SVE architecture leaves space for future expansion of the
* vector length beyond its initial architectural limit of 2048 bits
* (16 quadwords).
+ *
+ * See linux/Documentation/arm64/sve.txt for a description of the VL/VQ
+ * terminology.
*/
#define SVE_VQ_BYTES 16 /* number of bytes per quadword */
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 28/30] arm64/sve: Add documentation
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds basic documentation of the user/kernel interface
provided by the for SVE.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alan Hayward <alan.hayward@arm.com>
Cc: Alex Benn?e <alex.bennee@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Szabolcs Nagy <szabolcs.nagy@arm.com>
Cc: linux-api at vger.kernel.org
---
Documentation/arm64/sve.txt | 508 +++++++++++++++++++++++++++++++
arch/arm64/include/uapi/asm/sigcontext.h | 3 +
2 files changed, 511 insertions(+)
create mode 100644 Documentation/arm64/sve.txt
diff --git a/Documentation/arm64/sve.txt b/Documentation/arm64/sve.txt
new file mode 100644
index 0000000..f128f73
--- /dev/null
+++ b/Documentation/arm64/sve.txt
@@ -0,0 +1,508 @@
+ Scalable Vector Extension support for AArch64 Linux
+ ===================================================
+
+Author: Dave Martin <Dave.Martin@arm.com>
+Date: 4 August 2017
+
+This document outlines briefly the interface provided to userspace by Linux in
+order to support use of the ARM Scalable Vector Extension (SVE).
+
+This is an outline of the most important features and issues only and not
+intended to be exhaustive.
+
+This document does not aim to describe the SVE architecture or programmer's
+model. To aid understanding, a minimal description of relevant programmer's
+model features for SVE is included in Appendix A.
+
+
+1. General
+-----------
+
+* SVE registers Z0..Z31, P0..P15 and FFR and the current vector length VL, are
+ tracked per-thread.
+
+* The presence of SVE is reported to userspace via HWCAP_SVE in the aux vector
+ AT_HWCAP entry. Presence of this flag implies the presence of the SVE
+ instructions and registers, and the Linux-specific system interfaces
+ described in this document. SVE is reported in /proc/cpuinfo as "sve".
+
+* Support for the execution of SVE instructions in userspace can also be
+ detected by reading the CPU ID register ID_AA64PFR0_EL1 using an MRS
+ instruction, and checking that the value of the SVE field is nonzero. [3]
+
+ It does not guarantee the presence of the system interfaces described in the
+ following sections: software that needs to verify that those interfaces are
+ present must check for HWCAP_SVE instead.
+
+* Debuggers should restrict themselves to interacting with the target via the
+ NT_ARM_SVE regset. The recommended way of detecting support for this regset
+ is to connect to a target process first and then attempt a
+ ptrace(PTRACE_GETREGSET, pid, NT_ARM_SVE, &iov).
+
+
+2. Vector length terminology
+-----------------------------
+
+The size of an SVE vector (Z) register is referred to as the "vector length".
+
+To avoid confusion about the units used to express vector length, the kernel
+adopts the following conventions:
+
+* Vector length (VL) = size of a Z-register in bytes
+
+* Vector quadwords (VQ) = size of a Z-register in units of 128 bits
+
+(So, VL = 16 * VQ.)
+
+The VQ convention is used where the underlying granularity is important, such
+as in data structure definitions. In most other situations, the VL convention
+is used. This is consistent with the meaning of the "VL" pseudo-register in
+the SVE instruction set architecture.
+
+
+3. System call behaviour
+-------------------------
+
+* On syscall, V0..V31 are preserved (as without SVE). Thus, bits [127:0] of
+ Z0..Z31 are preserved. All other bits of Z0..Z31, and all of P0..P15 and FFR
+ become unspecified on return from a syscall.
+
+* The SVE registers are not used to pass arguments to or receive results from
+ any syscall.
+
+* In practice the affected registers/bits will be preserved or will be replaced
+ with zeros on return from a syscall, but userspace should not make
+ assumptions about this. The kernel behaviour may vary on a case-by-case
+ basis.
+
+* All other SVE state of a thread, including the currently configured vector
+ length, the state of the PR_SVE_VL_INHERIT flag, and the deferred vector
+ length (if any), is preserved across all syscalls, subject to the specific
+ exceptions for execve() described in section 6.
+
+ In particular, on return from a fork() or clone(), the parent and new child
+ process or thread share identical SVE configuration, matching that of the
+ parent before the call.
+
+
+4. Signal handling
+-------------------
+
+* A new signal frame record sve_context encodes the SVE registers on signal
+ delivery. [1]
+
+* This record is supplementary to fpsimd_context. The FPSR and FPCR registers
+ are only present in fpsimd_context. For convenience, the content of V0..V31
+ is duplicated between sve_context and fpsimd_context.
+
+* The signal frame record for SVE always contains basic metadata, in particular
+ the thread's vector length (in sve_context.vl).
+
+* The SVE registers may or may not be included in the record, depending on
+ whether the registers are live for the thread. The registers are present if
+ and only if:
+ sve_context.head.size >= SVE_SIG_CONTEXT_SIZE(sve_vq_from_vl(sve_context.vl)).
+
+* If the registers are present, the remainder of the record has a vl-dependent
+ size and layout. Macros SVE_SIG_* are defined [1] to facilitate access to
+ the members.
+
+* If the SVE context is too big to fit in sigcontext.__reserved[], then extra
+ space is allocated on the stack, an extra_context record is written in
+ __reserved[] referencing this space. sve_context is then written in the
+ extra space. Refer to [1] for further details about this mechanism.
+
+
+5. Signal return
+-----------------
+
+When returning from a signal handler:
+
+* If there is no sve_context record in the signal frame, or if the record is
+ present but contains no register data as desribed in the previous section,
+ then the SVE registers/bits become non-live and take unspecified values.
+
+* If sve_context is present in the signal frame and contains full register
+ data, the SVE registers become live and are populated with the specified
+ data. However, for backward compatibility reasons, bits [127:0] of Z0..Z31
+ are always restored from the corresponding members of fpsimd_context.vregs[]
+ and not from sve_context. The remaining bits are restored from sve_context.
+
+* Inclusion of fpsimd_context in the signal frame remains mandatory,
+ irrespective of whether sve_context is present or not.
+
+* The vector length cannot be changed via signal return. If sve_context.vl in
+ the signal frame does not match the current vector length, the signal return
+ attempt is treated as illegal, resulting in a forced SIGSEGV.
+
+
+6. prctl extensions
+--------------------
+
+Some new prctl() calls are added to allow programs to manage the SVE vector
+length:
+
+prctl(PR_SVE_SET_VL, unsigned long arg)
+
+ Sets the vector length of the calling thread and related flags, where
+ arg == vl | flags. Other threads of the calling process are unaffected.
+
+ vl is the desired vector length, where sve_vl_valid(vl) must be true.
+
+ flags:
+
+ PR_SVE_SET_VL_INHERIT
+
+ Inherit the current vector length across execve(). Otherwise, the
+ vector length is reset to the system default at execve(). (See
+ Section 9.)
+
+ PR_SVE_SET_VL_ONEXEC
+
+ Defer the requested vector length change until the next execve()
+ performed by this thread.
+
+ The effect is equivalent to implicit exceution of the following
+ call immediately after the next execve() (if any) by the thread:
+
+ prctl(PR_SVE_SET_VL, arg & ~PR_SVE_SET_VL_ONEXEC)
+
+ This allows launching of a new program with a different vector
+ length, while avoiding runtime side effects in the caller.
+
+
+ Without PR_SVE_SET_VL_ONEXEC, the requested change takes effect
+ immediately.
+
+
+ Return value: a nonnegative on success, or a negative value on error:
+ EINVAL: SVE not supported, invalid vector length requested, or
+ invalid flags.
+
+
+ On success:
+
+ * Either the calling thread's vector length or the deferred vector length
+ to be applied at the next execve() by the thread (dependent on whether
+ PR_SVE_SET_VL_ONEXEC is present in arg), is set to the largest value
+ supported by the system that is less than or equal to vl. If vl ==
+ SVE_VL_MAX, the value set will be the largest value supported by the
+ system.
+
+ * Any previously outstanding deferred vector length change in the calling
+ thread is cancelled.
+
+ * The returned value describes the resulting configuration, encoded as for
+ PR_SVE_GET_VL. The vector length reported in this value is the new
+ current vector length for this thread if PR_SVE_SET_VL_ONEXEC was not
+ present in arg; otherwise, the reported vector length is the deferred
+ vector length that will be applied at the next execve() by the calling
+ thread.
+
+ * Changing the vector length causes all of P0..P15, FFR and all bits of
+ Z0..V31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become
+ unspecified. Calling PR_SVE_SET_VL with vl equal to the thread's current
+ vector length, or calling PR_SVE_SET_VL with the PR_SVE_SET_VL_ONEXEC
+ flag, does not constitute a change to the vector length for this purpose.
+
+
+prctl(PR_SVE_GET_VL)
+
+ Gets the vector length of the calling thread.
+
+ The following flag may be OR-ed into the result:
+
+ PR_SVE_SET_VL_INHERIT
+
+ Vector length will be inherited across execve().
+
+ There is no way to determine whether there is an outstanding deferred
+ vector length change (which would only normally be the case between a
+ fork() or vfork() and the corresponding execve() in typical use).
+
+ To extract the vector length from the result, and it with
+ PR_SVE_VL_LEN_MASK.
+
+ Return value: a nonnegative value on success, or a negative value on error:
+ EINVAL: SVE not supported.
+
+
+7. ptrace extensions
+---------------------
+
+* A new regset NT_ARM_SVE is defined for use with PTRACE_GETREGSET and
+ PTRACE_SETREGSET.
+
+ Refer to [2] for definitions.
+
+The regset data starts with struct user_sve_header, containing:
+
+ size
+
+ Size of the complete regset, in bytes.
+ This depends on vl and possibly on other things in the future.
+
+ If a call to PTRACE_GETREGSET requests less data than the value of
+ size, the caller can allocate a larger buffer and retry in order to
+ read the complete regset.
+
+ max_size
+
+ Maximum size in bytes that the regset can grow to for the target
+ thread. The regset won't grow bigger than this even if the target
+ thread changes its vector length etc.
+
+ vl
+
+ Target thread's current vector length, in bytes.
+
+ max_vl
+
+ Maximum possible vector length for the target thread.
+
+ flags
+
+ either
+
+ SVE_PT_REGS_FPSIMD
+
+ SVE registers are not live (GETREGSET) or are to be made
+ non-live (SETREGSET).
+
+ The payload is of type struct user_fpsimd_state, with the same
+ meaning as for NT_PRFPREG, starting at offset
+ SVE_PT_FPSIMD_OFFSET from the start of user_sve_header.
+
+ Extra data might be appended in the future: the size of the
+ payload should be obtained using SVE_PT_FPSIMD_SIZE(vq, flags).
+
+ vq should be obtained using sve_vq_from_vl(vl).
+
+ or
+
+ SVE_PT_REGS_SVE
+
+ SVE registers are live (GETREGSET) or are to be made live
+ (SETREGSET).
+
+ The payload contains the SVE register data, starting at offset
+ SVE_PT_SVE_OFFSET from the start of user_sve_header, and with
+ size SVE_PT_SVE_SIZE(vq, flags);
+
+ ... OR-ed with zero or more of the following flags, which have the same
+ meaning and behaviour as the corresponding PR_SET_VL_* flags:
+
+ SVE_PT_VL_INHERIT
+
+ SVE_PT_VL_ONEXEC (SETREGSET only).
+
+* The effects of changing the vector length and/or flags are equivalent to
+ those documented for PR_SVE_SET_VL.
+
+ The caller must make a further GETREGSET call if it needs to know what VL is
+ actually set by SETREGSET, unless is it known in advance that the requested
+ VL is supported.
+
+* In the SVE_PT_REGS_SVE case, the size and layout of the payload depends on
+ the header fields. The SVE_PT_SVE_*() macros are provided to facilitate
+ access to the members.
+
+* In either case, for SETREGSET it is permissible to omit the payload, in which
+ case only the vector length and flags are changed (along with any
+ consequences of those changes).
+
+* For SETREGSET, if an SVE_PT_REGS_SVE payload is present and the
+ requested VL is not supported, the effect will be the same as if the
+ payload were omitted, except that an EIO error is reported. No
+ attempt is made to translate the payload data to the correct layout
+ for the vector length actually set. The thread's FPSIMD state is
+ preserved, but the remaining bits of the SVE registers become
+ unspecified. It is up to the caller to translate the payload layout
+ for the actual VL and retry.
+
+* The effect of writing a partial, incomplete payload is unspecified.
+
+
+8. ELF coredump extensions
+---------------------------
+
+* A NT_ARM_SVE note will be added to each coredump for each thread of the
+ dumped process. The contents will be equivalent to the data that would have
+ been read if a PTRACE_GETREGSET of NT_ARM_SVE were executed for each thread
+ when the coredump was generated.
+
+
+9. System runtime configuration
+--------------------------------
+
+* To mitigate the ABI impact of expansion of the signal frame, a policy
+ mechanism is provided for administrators, distro maintainers and developers
+ to set the default vector length for userspace processes:
+
+/proc/sys/abi/sve_default_vector_length
+
+ Writing the text representation of an integer to this file sets the system
+ default vector length to the specified value, unless the value is greater
+ than the maximum vector length supported by the system in which case the
+ default vector length is set to that maximum.
+
+ The result can be determined by reopening the file and reading its
+ contents.
+
+ At boot, the default vector length is initially set to 64 or the maximum
+ supported vector length, whichever is smaller. This determines the initial
+ vector length of the init process (PID 1).
+
+ Reading this file returns the current system default vector length.
+
+* At every execve() call, the new vector length of the new process is set to
+ the system default vector length, unless
+
+ * PR_SVE_SET_VL_INHERIT (or equivalently SVE_PT_VL_INHERIT) is set for the
+ calling thread, or
+
+ * a deferred vector length change is pending, established via the
+ PR_SVE_SET_VL_ONEXEC flag (or SVE_PT_VL_ONEXEC).
+
+* Modifying the system default vector length does not affect the vector length
+ of any existing process or thread that does not make an execve() call.
+
+
+Appendix A. SVE programmer's model (informative)
+=================================================
+
+This section provides a minimal description of the additions made by SVE to the
+ARMv8-A programmer's model that are relevant to this document.
+
+Note: This section is for information only and not intended to be complete or
+to replace any architectural specification.
+
+A.1. Registers
+---------------
+
+In A64 state, SVE adds the following:
+
+* 32 8VL-bit vector registers Z0..Z31
+ For each Zn, Zn bits [127:0] alias the ARMv8-A vector register Vn.
+
+ A register write using a Vn register name zeros all bits of the corresponding
+ Zn except for bits [127:0].
+
+* 16 VL-bit predicate registers P0..P15
+
+* 1 VL-bit special-purpose predicate register FFR (the "first-fault register")
+
+* a VL "pseudo-register" that determines the size of each vector register
+
+ The SVE instruction set architecture provides no way to write VL directly.
+ Instead, it can be modified only by EL1 and above, by writing appropriate
+ system registers.
+
+* The value of VL can be configured at runtime by EL1 and above:
+ 16 <= VL <= VLmax, where VL must be a multiple of 16.
+
+* The maximum vector length is determined by the hardware:
+ 16 <= VLmax <= 256.
+
+ (The SVE architecture specifies 256, but permits future architecture
+ revisions to raise this limit.)
+
+* FPSR and FPCR are retained from ARMv8-A, and interact with SVE floating-point
+ operations in a similar way to the way in which they interact with ARMv8
+ floating-point operations.
+
+ 8VL-1 128 0 bit index
+ +---- //// -----------------+
+ Z0 | : V0 |
+ : :
+ Z7 | : V7 |
+ Z8 | : * V8 |
+ : : :
+ Z15 | : *V15 |
+ Z16 | : V16 |
+ : :
+ Z31 | : V31 |
+ +---- //// -----------------+
+ 31 0
+ VL-1 0 +-------+
+ +---- //// --+ FPSR | |
+ P0 | | +-------+
+ : | | *FPCR | |
+ P15 | | +-------+
+ +---- //// --+
+ FFR | | +-----+
+ +---- //// --+ VL | |
+ +-----+
+
+(*) callee-save:
+ This only applies to bits [63:0] of Z-/V-registers.
+ FPCR contains callee-save and caller-save bits. See [4] for details.
+
+
+A.2. Procedure call standard
+-----------------------------
+
+The ARMv8-A base procedure call standard is extended as follows with respect to
+the additional SVE register state:
+
+* All SVE register bits that are not shared with FP/SIMD are caller-save.
+
+* Z8 bits [63:0] .. Z15 bits [63:0] are callee-save.
+
+ This follows from the way these bits are mapped to V8..V15, which are caller-
+ save in the base procedure call standard.
+
+
+Appendix B. ARMv8-A FP/SIMD programmer's model
+===============================================
+
+Note: This section is for information only and not intended to be complete or
+to replace any architectural specification.
+
+Refer to [4] for for more information.
+
+ARMv8-A defines the following floating-point / SIMD register state:
+
+* 32 128-bit vector registers V0..V31
+* 2 32-bit status/control registers FPSR, FPCR
+
+ 127 0 bit index
+ +---------------+
+ V0 | |
+ : : :
+ V7 | |
+ * V8 | |
+ : : : :
+ *V15 | |
+ V16 | |
+ : : :
+ V31 | |
+ +---------------+
+
+ 31 0
+ +-------+
+ FPSR | |
+ +-------+
+ *FPCR | |
+ +-------+
+
+(*) callee-save:
+ This only applies to bits [63:0] of V-registers.
+ FPCR contains a mixture of callee-save and caller-save bits.
+
+
+References
+==========
+
+[1] arch/arm64/include/uapi/asm/sigcontext.h
+ AArch64 Linux signal ABI definitions
+
+[2] arch/arm64/include/uapi/asm/ptrace.h
+ AArch64 Linux ptrace ABI definitions
+
+[3] linux/Documentation/arm64/cpu-feature-registers.txt
+
+[4] ARM IHI0055C
+ http://infocenter.arm.com/help/topic/com.arm.doc.ihi0055c/IHI0055C_beta_aapcs64.pdf
+ http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html
+ Procedure Call Standard for the ARM 64-bit Architecture (AArch64)
diff --git a/arch/arm64/include/uapi/asm/sigcontext.h b/arch/arm64/include/uapi/asm/sigcontext.h
index 7654a81..3c0b484 100644
--- a/arch/arm64/include/uapi/asm/sigcontext.h
+++ b/arch/arm64/include/uapi/asm/sigcontext.h
@@ -133,6 +133,9 @@ struct sve_context {
* The SVE architecture leaves space for future expansion of the
* vector length beyond its initial architectural limit of 2048 bits
* (16 quadwords).
+ *
+ * See linux/Documentation/arm64/sve.txt for a description of the VL/VQ
+ * terminology.
*/
#define SVE_VQ_BYTES 16 /* number of bytes per quadword */
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [RFC PATCH v5 29/30] arm64: signal: Report signal frame size to userspace via auxv
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-arch, Okamoto Takayuki, libc-alpha, Ard Biesheuvel,
Szabolcs Nagy, Catalin Marinas, Will Deacon, kvmarm
Stateful CPU architecture extensions may require the signal frame
to grow to a size that exceeds the arch's MINSIGSTKSZ #define.
However, changing this #define is an ABI break.
To allow userspace the option of determining the signal frame size
in a more forwards-compatible way, this patch adds a new auxv entry
tagged with AT_MINSIGSTKSZ, which provides the maximum signal frame
size that the process can observe during its lifetime.
If AT_MINSIGSTKSZ is absent from the aux vector, the caller can
assume that the MINSIGSTKSZ #define is sufficient. This allows for
a consistent interface with older kernels that do not provide
AT_MINSIGSTKSZ.
The idea is that libc could expose this via sysconf() or some
similar mechanism.
There is deliberately no AT_SIGSTKSZ. The kernel knows nothing
about userspace's own stack overheads and should not pretend to
know.
For arm64:
The primary motivation for this interface is the Scalable Vector
Extension, which can require at least 4KB or so of extra space
in the signal frame for the largest hardware implementations.
To determine the correct value, a "Christmas tree" mode (via the
add_all argument) is added to setup_sigframe_layout(), to simulate
addition of all possible records to the signal frame at maximum
possible size.
If this procedure goes wrong somehow, resulting in a stupidly large
frame layout and hence failure of sigframe_alloc() to allocate a
record to the frame, then this is indicative of a kernel bug: the
kernel's internal SIGFRAME_MAXSZ is supposed to sanity-check
against generting frames that we consider _impossibly_ large. In
this case, SIGSTKSZ is returned as a "reasonable guess that is at
least bigger than MINSIGSTKSZ" and we WARN().
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
---
arch/arm64/include/asm/elf.h | 5 +++++
arch/arm64/include/asm/processor.h | 3 +++
arch/arm64/include/uapi/asm/auxvec.h | 3 ++-
arch/arm64/kernel/signal.c | 39 +++++++++++++++++++++++++++++++-----
4 files changed, 44 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h
index fac1c4d..771c7a8 100644
--- a/arch/arm64/include/asm/elf.h
+++ b/arch/arm64/include/asm/elf.h
@@ -24,6 +24,10 @@
#include <asm/ptrace.h>
#include <asm/user.h>
+#ifndef __ASSEMBLY__
+#include <asm/processor.h> /* for get_minsigstksz(), used by ARCH_DLINFO */
+#endif
+
/*
* AArch64 static relocation types.
*/
@@ -148,6 +152,7 @@ typedef struct user_fpsimd_state elf_fpregset_t;
do { \
NEW_AUX_ENT(AT_SYSINFO_EHDR, \
(elf_addr_t)current->mm->context.vdso); \
+ NEW_AUX_ENT(AT_MINSIGSTKSZ, get_minsigstksz()); \
} while (0)
#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index 023cacb..055b06d 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -217,6 +217,9 @@ static inline void spin_lock_prefetch(const void *ptr)
int cpu_enable_pan(void *__unused);
int cpu_enable_cache_maint_trap(void *__unused);
+/* User signal frame size discovery: */
+int get_minsigstksz(void);
+
/* Userspace interface for PR_SVE_{SET,GET}_VL prctl()s: */
#define SVE_SET_VL(arg) sve_set_current_vl(arg)
#define SVE_GET_VL() sve_get_current_vl()
diff --git a/arch/arm64/include/uapi/asm/auxvec.h b/arch/arm64/include/uapi/asm/auxvec.h
index 4cf0c17..1d45b28 100644
--- a/arch/arm64/include/uapi/asm/auxvec.h
+++ b/arch/arm64/include/uapi/asm/auxvec.h
@@ -18,7 +18,8 @@
/* vDSO location */
#define AT_SYSINFO_EHDR 33
+#define AT_MINSIGSTKSZ 34 /* stack needed for signal delivery */
-#define AT_VECTOR_SIZE_ARCH 1 /* entries in ARCH_DLINFO */
+#define AT_VECTOR_SIZE_ARCH 2 /* entries in ARCH_DLINFO */
#endif
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 64abf88..7c7d9ae 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -571,8 +571,15 @@ asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
return 0;
}
-/* Determine the layout of optional records in the signal frame */
-static int setup_sigframe_layout(struct rt_sigframe_user_layout *user)
+/*
+ * Determine the layout of optional records in the signal frame
+ *
+ * add_all: if true, lays out the biggest possible signal frame for
+ * this task; otherwise, generates a layout for the current state
+ * of the task.
+ */
+static int setup_sigframe_layout(struct rt_sigframe_user_layout *user,
+ bool add_all)
{
int err;
@@ -582,7 +589,7 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user)
return err;
/* fault information, if valid */
- if (current->thread.fault_code) {
+ if (add_all || current->thread.fault_code) {
err = sigframe_alloc(user, &user->esr_offset,
sizeof(struct esr_context));
if (err)
@@ -604,7 +611,6 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user)
return sigframe_alloc_end(user);
}
-
static int setup_sigframe(struct rt_sigframe_user_layout *user,
struct pt_regs *regs, sigset_t *set)
{
@@ -702,7 +708,7 @@ static int get_sigframe(struct rt_sigframe_user_layout *user,
int err;
init_user_layout(user);
- err = setup_sigframe_layout(user);
+ err = setup_sigframe_layout(user, false);
if (err)
return err;
@@ -934,3 +940,26 @@ asmlinkage void do_notify_resume(struct pt_regs *regs,
thread_flags = READ_ONCE(current_thread_info()->flags);
} while (thread_flags & _TIF_WORK_MASK);
}
+
+/*
+ * Determine the stack space required for guaranteed signal devliery.
+ * This function is used to populate AT_MINSIGSTKSZ at process startup.
+ */
+int get_minsigstksz(void)
+{
+ struct rt_sigframe_user_layout user;
+ int err;
+
+ init_user_layout(&user);
+ err = setup_sigframe_layout(&user, true);
+
+ if (err) {
+ WARN_ON(1);
+
+ return SIGSTKSZ;
+ } else {
+ return sigframe_size(&user) +
+ round_up(sizeof(struct frame_record), 16) +
+ 16; /* max alignment padding */
+ }
+}
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [RFC PATCH v5 29/30] arm64: signal: Report signal frame size to userspace via auxv
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
Stateful CPU architecture extensions may require the signal frame
to grow to a size that exceeds the arch's MINSIGSTKSZ #define.
However, changing this #define is an ABI break.
To allow userspace the option of determining the signal frame size
in a more forwards-compatible way, this patch adds a new auxv entry
tagged with AT_MINSIGSTKSZ, which provides the maximum signal frame
size that the process can observe during its lifetime.
If AT_MINSIGSTKSZ is absent from the aux vector, the caller can
assume that the MINSIGSTKSZ #define is sufficient. This allows for
a consistent interface with older kernels that do not provide
AT_MINSIGSTKSZ.
The idea is that libc could expose this via sysconf() or some
similar mechanism.
There is deliberately no AT_SIGSTKSZ. The kernel knows nothing
about userspace's own stack overheads and should not pretend to
know.
For arm64:
The primary motivation for this interface is the Scalable Vector
Extension, which can require at least 4KB or so of extra space
in the signal frame for the largest hardware implementations.
To determine the correct value, a "Christmas tree" mode (via the
add_all argument) is added to setup_sigframe_layout(), to simulate
addition of all possible records to the signal frame at maximum
possible size.
If this procedure goes wrong somehow, resulting in a stupidly large
frame layout and hence failure of sigframe_alloc() to allocate a
record to the frame, then this is indicative of a kernel bug: the
kernel's internal SIGFRAME_MAXSZ is supposed to sanity-check
against generting frames that we consider _impossibly_ large. In
this case, SIGSTKSZ is returned as a "reasonable guess that is at
least bigger than MINSIGSTKSZ" and we WARN().
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
---
arch/arm64/include/asm/elf.h | 5 +++++
arch/arm64/include/asm/processor.h | 3 +++
arch/arm64/include/uapi/asm/auxvec.h | 3 ++-
arch/arm64/kernel/signal.c | 39 +++++++++++++++++++++++++++++++-----
4 files changed, 44 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h
index fac1c4d..771c7a8 100644
--- a/arch/arm64/include/asm/elf.h
+++ b/arch/arm64/include/asm/elf.h
@@ -24,6 +24,10 @@
#include <asm/ptrace.h>
#include <asm/user.h>
+#ifndef __ASSEMBLY__
+#include <asm/processor.h> /* for get_minsigstksz(), used by ARCH_DLINFO */
+#endif
+
/*
* AArch64 static relocation types.
*/
@@ -148,6 +152,7 @@ typedef struct user_fpsimd_state elf_fpregset_t;
do { \
NEW_AUX_ENT(AT_SYSINFO_EHDR, \
(elf_addr_t)current->mm->context.vdso); \
+ NEW_AUX_ENT(AT_MINSIGSTKSZ, get_minsigstksz()); \
} while (0)
#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index 023cacb..055b06d 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -217,6 +217,9 @@ static inline void spin_lock_prefetch(const void *ptr)
int cpu_enable_pan(void *__unused);
int cpu_enable_cache_maint_trap(void *__unused);
+/* User signal frame size discovery: */
+int get_minsigstksz(void);
+
/* Userspace interface for PR_SVE_{SET,GET}_VL prctl()s: */
#define SVE_SET_VL(arg) sve_set_current_vl(arg)
#define SVE_GET_VL() sve_get_current_vl()
diff --git a/arch/arm64/include/uapi/asm/auxvec.h b/arch/arm64/include/uapi/asm/auxvec.h
index 4cf0c17..1d45b28 100644
--- a/arch/arm64/include/uapi/asm/auxvec.h
+++ b/arch/arm64/include/uapi/asm/auxvec.h
@@ -18,7 +18,8 @@
/* vDSO location */
#define AT_SYSINFO_EHDR 33
+#define AT_MINSIGSTKSZ 34 /* stack needed for signal delivery */
-#define AT_VECTOR_SIZE_ARCH 1 /* entries in ARCH_DLINFO */
+#define AT_VECTOR_SIZE_ARCH 2 /* entries in ARCH_DLINFO */
#endif
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 64abf88..7c7d9ae 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -571,8 +571,15 @@ asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
return 0;
}
-/* Determine the layout of optional records in the signal frame */
-static int setup_sigframe_layout(struct rt_sigframe_user_layout *user)
+/*
+ * Determine the layout of optional records in the signal frame
+ *
+ * add_all: if true, lays out the biggest possible signal frame for
+ * this task; otherwise, generates a layout for the current state
+ * of the task.
+ */
+static int setup_sigframe_layout(struct rt_sigframe_user_layout *user,
+ bool add_all)
{
int err;
@@ -582,7 +589,7 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user)
return err;
/* fault information, if valid */
- if (current->thread.fault_code) {
+ if (add_all || current->thread.fault_code) {
err = sigframe_alloc(user, &user->esr_offset,
sizeof(struct esr_context));
if (err)
@@ -604,7 +611,6 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user)
return sigframe_alloc_end(user);
}
-
static int setup_sigframe(struct rt_sigframe_user_layout *user,
struct pt_regs *regs, sigset_t *set)
{
@@ -702,7 +708,7 @@ static int get_sigframe(struct rt_sigframe_user_layout *user,
int err;
init_user_layout(user);
- err = setup_sigframe_layout(user);
+ err = setup_sigframe_layout(user, false);
if (err)
return err;
@@ -934,3 +940,26 @@ asmlinkage void do_notify_resume(struct pt_regs *regs,
thread_flags = READ_ONCE(current_thread_info()->flags);
} while (thread_flags & _TIF_WORK_MASK);
}
+
+/*
+ * Determine the stack space required for guaranteed signal devliery.
+ * This function is used to populate AT_MINSIGSTKSZ at process startup.
+ */
+int get_minsigstksz(void)
+{
+ struct rt_sigframe_user_layout user;
+ int err;
+
+ init_user_layout(&user);
+ err = setup_sigframe_layout(&user, true);
+
+ if (err) {
+ WARN_ON(1);
+
+ return SIGSTKSZ;
+ } else {
+ return sigframe_size(&user) +
+ round_up(sizeof(struct frame_record), 16) +
+ 16; /* max alignment padding */
+ }
+}
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [RFC PATCH v5 29/30] arm64: signal: Report signal frame size to userspace via auxv
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Stateful CPU architecture extensions may require the signal frame
to grow to a size that exceeds the arch's MINSIGSTKSZ #define.
However, changing this #define is an ABI break.
To allow userspace the option of determining the signal frame size
in a more forwards-compatible way, this patch adds a new auxv entry
tagged with AT_MINSIGSTKSZ, which provides the maximum signal frame
size that the process can observe during its lifetime.
If AT_MINSIGSTKSZ is absent from the aux vector, the caller can
assume that the MINSIGSTKSZ #define is sufficient. This allows for
a consistent interface with older kernels that do not provide
AT_MINSIGSTKSZ.
The idea is that libc could expose this via sysconf() or some
similar mechanism.
There is deliberately no AT_SIGSTKSZ. The kernel knows nothing
about userspace's own stack overheads and should not pretend to
know.
For arm64:
The primary motivation for this interface is the Scalable Vector
Extension, which can require at least 4KB or so of extra space
in the signal frame for the largest hardware implementations.
To determine the correct value, a "Christmas tree" mode (via the
add_all argument) is added to setup_sigframe_layout(), to simulate
addition of all possible records to the signal frame at maximum
possible size.
If this procedure goes wrong somehow, resulting in a stupidly large
frame layout and hence failure of sigframe_alloc() to allocate a
record to the frame, then this is indicative of a kernel bug: the
kernel's internal SIGFRAME_MAXSZ is supposed to sanity-check
against generting frames that we consider _impossibly_ large. In
this case, SIGSTKSZ is returned as a "reasonable guess that is at
least bigger than MINSIGSTKSZ" and we WARN().
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
---
arch/arm64/include/asm/elf.h | 5 +++++
arch/arm64/include/asm/processor.h | 3 +++
arch/arm64/include/uapi/asm/auxvec.h | 3 ++-
arch/arm64/kernel/signal.c | 39 +++++++++++++++++++++++++++++++-----
4 files changed, 44 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h
index fac1c4d..771c7a8 100644
--- a/arch/arm64/include/asm/elf.h
+++ b/arch/arm64/include/asm/elf.h
@@ -24,6 +24,10 @@
#include <asm/ptrace.h>
#include <asm/user.h>
+#ifndef __ASSEMBLY__
+#include <asm/processor.h> /* for get_minsigstksz(), used by ARCH_DLINFO */
+#endif
+
/*
* AArch64 static relocation types.
*/
@@ -148,6 +152,7 @@ typedef struct user_fpsimd_state elf_fpregset_t;
do { \
NEW_AUX_ENT(AT_SYSINFO_EHDR, \
(elf_addr_t)current->mm->context.vdso); \
+ NEW_AUX_ENT(AT_MINSIGSTKSZ, get_minsigstksz()); \
} while (0)
#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index 023cacb..055b06d 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -217,6 +217,9 @@ static inline void spin_lock_prefetch(const void *ptr)
int cpu_enable_pan(void *__unused);
int cpu_enable_cache_maint_trap(void *__unused);
+/* User signal frame size discovery: */
+int get_minsigstksz(void);
+
/* Userspace interface for PR_SVE_{SET,GET}_VL prctl()s: */
#define SVE_SET_VL(arg) sve_set_current_vl(arg)
#define SVE_GET_VL() sve_get_current_vl()
diff --git a/arch/arm64/include/uapi/asm/auxvec.h b/arch/arm64/include/uapi/asm/auxvec.h
index 4cf0c17..1d45b28 100644
--- a/arch/arm64/include/uapi/asm/auxvec.h
+++ b/arch/arm64/include/uapi/asm/auxvec.h
@@ -18,7 +18,8 @@
/* vDSO location */
#define AT_SYSINFO_EHDR 33
+#define AT_MINSIGSTKSZ 34 /* stack needed for signal delivery */
-#define AT_VECTOR_SIZE_ARCH 1 /* entries in ARCH_DLINFO */
+#define AT_VECTOR_SIZE_ARCH 2 /* entries in ARCH_DLINFO */
#endif
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 64abf88..7c7d9ae 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -571,8 +571,15 @@ asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
return 0;
}
-/* Determine the layout of optional records in the signal frame */
-static int setup_sigframe_layout(struct rt_sigframe_user_layout *user)
+/*
+ * Determine the layout of optional records in the signal frame
+ *
+ * add_all: if true, lays out the biggest possible signal frame for
+ * this task; otherwise, generates a layout for the current state
+ * of the task.
+ */
+static int setup_sigframe_layout(struct rt_sigframe_user_layout *user,
+ bool add_all)
{
int err;
@@ -582,7 +589,7 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user)
return err;
/* fault information, if valid */
- if (current->thread.fault_code) {
+ if (add_all || current->thread.fault_code) {
err = sigframe_alloc(user, &user->esr_offset,
sizeof(struct esr_context));
if (err)
@@ -604,7 +611,6 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user)
return sigframe_alloc_end(user);
}
-
static int setup_sigframe(struct rt_sigframe_user_layout *user,
struct pt_regs *regs, sigset_t *set)
{
@@ -702,7 +708,7 @@ static int get_sigframe(struct rt_sigframe_user_layout *user,
int err;
init_user_layout(user);
- err = setup_sigframe_layout(user);
+ err = setup_sigframe_layout(user, false);
if (err)
return err;
@@ -934,3 +940,26 @@ asmlinkage void do_notify_resume(struct pt_regs *regs,
thread_flags = READ_ONCE(current_thread_info()->flags);
} while (thread_flags & _TIF_WORK_MASK);
}
+
+/*
+ * Determine the stack space required for guaranteed signal devliery.
+ * This function is used to populate AT_MINSIGSTKSZ at process startup.
+ */
+int get_minsigstksz(void)
+{
+ struct rt_sigframe_user_layout user;
+ int err;
+
+ init_user_layout(&user);
+ err = setup_sigframe_layout(&user, true);
+
+ if (err) {
+ WARN_ON(1);
+
+ return SIGSTKSZ;
+ } else {
+ return sigframe_size(&user) +
+ round_up(sizeof(struct frame_record), 16) +
+ 16; /* max alignment padding */
+ }
+}
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [RFC PATCH v5 30/30] arm64/sve: signal: Include SVE when computing AT_MINSIGSTKSZ
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-arch, Okamoto Takayuki, libc-alpha, Ard Biesheuvel,
Szabolcs Nagy, Catalin Marinas, Will Deacon, kvmarm
The SVE context block in the signal frame needs to be considered
too when computing the maximum possible signal frame size.
Because the size of this block depends on the vector length, this
patch computes the size based not on the thread's current vector
length but instead on the maximum possible vector length: this
determines the maximum size of SVE context block that can be
observed in any signal frame for the lifetime of the process.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Alex Bennée <alex.bennee@linaro.org>
---
arch/arm64/kernel/signal.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 7c7d9ae..9b8aa92 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -599,8 +599,18 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user,
if (system_supports_sve()) {
unsigned int vq = 0;
- if (test_thread_flag(TIF_SVE))
- vq = sve_vq_from_vl(current->thread.sve_vl);
+ if (add_all || test_thread_flag(TIF_SVE)) {
+ int vl = sve_max_vl;
+
+ if (!add_all)
+ vl = current->thread.sve_vl;
+
+ /* Fail safe if something wasn't initialised */
+ if (WARN_ON(!sve_vl_valid(vl)))
+ vl = SVE_VL_MIN;
+
+ vq = sve_vq_from_vl(vl);
+ }
err = sigframe_alloc(user, &user->sve_offset,
SVE_SIG_CONTEXT_SIZE(vq));
--
2.1.4
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [RFC PATCH v5 30/30] arm64/sve: signal: Include SVE when computing AT_MINSIGSTKSZ
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Catalin Marinas, Will Deacon, Ard Biesheuvel, Alex Bennée,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
The SVE context block in the signal frame needs to be considered
too when computing the maximum possible signal frame size.
Because the size of this block depends on the vector length, this
patch computes the size based not on the thread's current vector
length but instead on the maximum possible vector length: this
determines the maximum size of SVE context block that can be
observed in any signal frame for the lifetime of the process.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Alex Bennée <alex.bennee@linaro.org>
---
arch/arm64/kernel/signal.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 7c7d9ae..9b8aa92 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -599,8 +599,18 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user,
if (system_supports_sve()) {
unsigned int vq = 0;
- if (test_thread_flag(TIF_SVE))
- vq = sve_vq_from_vl(current->thread.sve_vl);
+ if (add_all || test_thread_flag(TIF_SVE)) {
+ int vl = sve_max_vl;
+
+ if (!add_all)
+ vl = current->thread.sve_vl;
+
+ /* Fail safe if something wasn't initialised */
+ if (WARN_ON(!sve_vl_valid(vl)))
+ vl = SVE_VL_MIN;
+
+ vq = sve_vq_from_vl(vl);
+ }
err = sigframe_alloc(user, &user->sve_offset,
SVE_SIG_CONTEXT_SIZE(vq));
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [RFC PATCH v5 30/30] arm64/sve: signal: Include SVE when computing AT_MINSIGSTKSZ
@ 2017-10-31 15:51 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-10-31 15:51 UTC (permalink / raw)
To: linux-arm-kernel
The SVE context block in the signal frame needs to be considered
too when computing the maximum possible signal frame size.
Because the size of this block depends on the vector length, this
patch computes the size based not on the thread's current vector
length but instead on the maximum possible vector length: this
determines the maximum size of SVE context block that can be
observed in any signal frame for the lifetime of the process.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Alex Benn?e <alex.bennee@linaro.org>
---
arch/arm64/kernel/signal.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 7c7d9ae..9b8aa92 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -599,8 +599,18 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user,
if (system_supports_sve()) {
unsigned int vq = 0;
- if (test_thread_flag(TIF_SVE))
- vq = sve_vq_from_vl(current->thread.sve_vl);
+ if (add_all || test_thread_flag(TIF_SVE)) {
+ int vl = sve_max_vl;
+
+ if (!add_all)
+ vl = current->thread.sve_vl;
+
+ /* Fail safe if something wasn't initialised */
+ if (WARN_ON(!sve_vl_valid(vl)))
+ vl = SVE_VL_MIN;
+
+ vq = sve_vq_from_vl(vl);
+ }
err = sigframe_alloc(user, &user->sve_offset,
SVE_SIG_CONTEXT_SIZE(vq));
--
2.1.4
^ permalink raw reply related [flat|nested] 174+ messages in thread
* Re: [PATCH v5 04/30] arm64: KVM: Hide unsupported AArch64 CPU features from guests
2017-10-31 15:50 ` Dave Martin
@ 2017-11-01 4:47 ` Christoffer Dall
-1 siblings, 0 replies; 174+ messages in thread
From: Christoffer Dall @ 2017-11-01 4:47 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel, Catalin Marinas, Will Deacon, Ard Biesheuvel,
Alex Bennée, Szabolcs Nagy, Okamoto Takayuki, kvmarm,
libc-alpha, linux-arch, Christoffer Dall
On Tue, Oct 31, 2017 at 03:50:56PM +0000, Dave Martin wrote:
> Currently, a guest kernel sees the true CPU feature registers
> (ID_*_EL1) when it reads them using MRS instructions. This means
> that the guest may observe features that are present in the
> hardware but the host doesn't understand or doesn't provide support
> for. A guest may legimitately try to use such a feature as per the
> architecture, but use of the feature may trap instead of working
> normally, triggering undef injection into the guest.
>
> This is not a problem for the host, but the guest may go wrong when
> running on newer hardware than the host knows about.
>
> This patch hides from guest VMs any AArch64-specific CPU features
> that the host doesn't support, by exposing to the guest the
> sanitised versions of the registers computed by the cpufeatures
> framework, instead of the true hardware registers. To achieve
> this, HCR_EL2.TID3 is now set for AArch64 guests, and emulation
> code is added to KVM to report the sanitised versions of the
> affected registers in response to MRS and register reads from
> userspace.
>
> The affected registers are removed from invariant_sys_regs[] (since
> the invariant_sys_regs handling is no longer quite correct for
> them) and added to sys_reg_desgs[], with appropriate access(),
> get_user() and set_user() methods. No runtime vcpu storage is
> allocated for the registers: instead, they are read on demand from
> the cpufeatures framework. This may need modification in the
> future if there is a need for userspace to customise the features
> visible to the guest.
>
> Attempts by userspace to write the registers are handled similarly
> to the current invariant_sys_regs handling: writes are permitted,
> but only if they don't attempt to change the value. This is
> sufficient to support VM snapshot/restore from userspace.
>
> Because of the additional registers, restoring a VM on an older
> kernel may not work unless userspace knows how to handle the extra
> VM registers exposed to the KVM user ABI by this patch.
>
> Under the principle of least damage, this patch makes no attempt to
> handle any of the other registers currently in
> invariant_sys_regs[], or to emulate registers for AArch32: however,
> these could be handled in a similar way in future, as necessary.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Christoffer Dall <christoffer.dall@linaro.org>
> ---
> arch/arm64/include/asm/sysreg.h | 3 +
> arch/arm64/kvm/hyp/switch.c | 6 +
> arch/arm64/kvm/sys_regs.c | 282 +++++++++++++++++++++++++++++++++-------
> 3 files changed, 246 insertions(+), 45 deletions(-)
>
> diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
> index 4dceb12..609d59af 100644
> --- a/arch/arm64/include/asm/sysreg.h
> +++ b/arch/arm64/include/asm/sysreg.h
> @@ -149,6 +149,9 @@
> #define SYS_ID_AA64DFR0_EL1 sys_reg(3, 0, 0, 5, 0)
> #define SYS_ID_AA64DFR1_EL1 sys_reg(3, 0, 0, 5, 1)
>
> +#define SYS_ID_AA64AFR0_EL1 sys_reg(3, 0, 0, 5, 4)
> +#define SYS_ID_AA64AFR1_EL1 sys_reg(3, 0, 0, 5, 5)
> +
> #define SYS_ID_AA64ISAR0_EL1 sys_reg(3, 0, 0, 6, 0)
> #define SYS_ID_AA64ISAR1_EL1 sys_reg(3, 0, 0, 6, 1)
>
> diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
> index 945e79c..35a90b8 100644
> --- a/arch/arm64/kvm/hyp/switch.c
> +++ b/arch/arm64/kvm/hyp/switch.c
> @@ -81,11 +81,17 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu)
> * it will cause an exception.
> */
> val = vcpu->arch.hcr_el2;
> +
> if (!(val & HCR_RW) && system_supports_fpsimd()) {
> write_sysreg(1 << 30, fpexc32_el2);
> isb();
> }
> +
> + if (val & HCR_RW) /* for AArch64 only: */
> + val |= HCR_TID3; /* TID3: trap feature register accesses */
> +
I still think we should set this in vcpu_reset_hcr() and do it once
instead of adding code in every iteration of the critical path.
Otherwise this patch looks good to me.
Thanks,
-Christoffer
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 04/30] arm64: KVM: Hide unsupported AArch64 CPU features from guests
@ 2017-11-01 4:47 ` Christoffer Dall
0 siblings, 0 replies; 174+ messages in thread
From: Christoffer Dall @ 2017-11-01 4:47 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Oct 31, 2017 at 03:50:56PM +0000, Dave Martin wrote:
> Currently, a guest kernel sees the true CPU feature registers
> (ID_*_EL1) when it reads them using MRS instructions. This means
> that the guest may observe features that are present in the
> hardware but the host doesn't understand or doesn't provide support
> for. A guest may legimitately try to use such a feature as per the
> architecture, but use of the feature may trap instead of working
> normally, triggering undef injection into the guest.
>
> This is not a problem for the host, but the guest may go wrong when
> running on newer hardware than the host knows about.
>
> This patch hides from guest VMs any AArch64-specific CPU features
> that the host doesn't support, by exposing to the guest the
> sanitised versions of the registers computed by the cpufeatures
> framework, instead of the true hardware registers. To achieve
> this, HCR_EL2.TID3 is now set for AArch64 guests, and emulation
> code is added to KVM to report the sanitised versions of the
> affected registers in response to MRS and register reads from
> userspace.
>
> The affected registers are removed from invariant_sys_regs[] (since
> the invariant_sys_regs handling is no longer quite correct for
> them) and added to sys_reg_desgs[], with appropriate access(),
> get_user() and set_user() methods. No runtime vcpu storage is
> allocated for the registers: instead, they are read on demand from
> the cpufeatures framework. This may need modification in the
> future if there is a need for userspace to customise the features
> visible to the guest.
>
> Attempts by userspace to write the registers are handled similarly
> to the current invariant_sys_regs handling: writes are permitted,
> but only if they don't attempt to change the value. This is
> sufficient to support VM snapshot/restore from userspace.
>
> Because of the additional registers, restoring a VM on an older
> kernel may not work unless userspace knows how to handle the extra
> VM registers exposed to the KVM user ABI by this patch.
>
> Under the principle of least damage, this patch makes no attempt to
> handle any of the other registers currently in
> invariant_sys_regs[], or to emulate registers for AArch32: however,
> these could be handled in a similar way in future, as necessary.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Christoffer Dall <christoffer.dall@linaro.org>
> ---
> arch/arm64/include/asm/sysreg.h | 3 +
> arch/arm64/kvm/hyp/switch.c | 6 +
> arch/arm64/kvm/sys_regs.c | 282 +++++++++++++++++++++++++++++++++-------
> 3 files changed, 246 insertions(+), 45 deletions(-)
>
> diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
> index 4dceb12..609d59af 100644
> --- a/arch/arm64/include/asm/sysreg.h
> +++ b/arch/arm64/include/asm/sysreg.h
> @@ -149,6 +149,9 @@
> #define SYS_ID_AA64DFR0_EL1 sys_reg(3, 0, 0, 5, 0)
> #define SYS_ID_AA64DFR1_EL1 sys_reg(3, 0, 0, 5, 1)
>
> +#define SYS_ID_AA64AFR0_EL1 sys_reg(3, 0, 0, 5, 4)
> +#define SYS_ID_AA64AFR1_EL1 sys_reg(3, 0, 0, 5, 5)
> +
> #define SYS_ID_AA64ISAR0_EL1 sys_reg(3, 0, 0, 6, 0)
> #define SYS_ID_AA64ISAR1_EL1 sys_reg(3, 0, 0, 6, 1)
>
> diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
> index 945e79c..35a90b8 100644
> --- a/arch/arm64/kvm/hyp/switch.c
> +++ b/arch/arm64/kvm/hyp/switch.c
> @@ -81,11 +81,17 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu)
> * it will cause an exception.
> */
> val = vcpu->arch.hcr_el2;
> +
> if (!(val & HCR_RW) && system_supports_fpsimd()) {
> write_sysreg(1 << 30, fpexc32_el2);
> isb();
> }
> +
> + if (val & HCR_RW) /* for AArch64 only: */
> + val |= HCR_TID3; /* TID3: trap feature register accesses */
> +
I still think we should set this in vcpu_reset_hcr() and do it once
instead of adding code in every iteration of the critical path.
Otherwise this patch looks good to me.
Thanks,
-Christoffer
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 04/30] arm64: KVM: Hide unsupported AArch64 CPU features from guests
2017-11-01 4:47 ` Christoffer Dall
@ 2017-11-01 10:26 ` Dave Martin
-1 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-11-01 10:26 UTC (permalink / raw)
To: Christoffer Dall
Cc: linux-arch, Okamoto Takayuki, libc-alpha, Ard Biesheuvel,
Szabolcs Nagy, Catalin Marinas, Will Deacon, Christoffer Dall,
Alex Bennée, kvmarm, linux-arm-kernel
On Wed, Nov 01, 2017 at 05:47:29AM +0100, Christoffer Dall wrote:
> On Tue, Oct 31, 2017 at 03:50:56PM +0000, Dave Martin wrote:
> > Currently, a guest kernel sees the true CPU feature registers
> > (ID_*_EL1) when it reads them using MRS instructions. This means
> > that the guest may observe features that are present in the
> > hardware but the host doesn't understand or doesn't provide support
> > for. A guest may legimitately try to use such a feature as per the
> > architecture, but use of the feature may trap instead of working
> > normally, triggering undef injection into the guest.
> >
> > This is not a problem for the host, but the guest may go wrong when
> > running on newer hardware than the host knows about.
> >
> > This patch hides from guest VMs any AArch64-specific CPU features
> > that the host doesn't support, by exposing to the guest the
> > sanitised versions of the registers computed by the cpufeatures
> > framework, instead of the true hardware registers. To achieve
> > this, HCR_EL2.TID3 is now set for AArch64 guests, and emulation
> > code is added to KVM to report the sanitised versions of the
> > affected registers in response to MRS and register reads from
> > userspace.
> >
> > The affected registers are removed from invariant_sys_regs[] (since
> > the invariant_sys_regs handling is no longer quite correct for
> > them) and added to sys_reg_desgs[], with appropriate access(),
> > get_user() and set_user() methods. No runtime vcpu storage is
> > allocated for the registers: instead, they are read on demand from
> > the cpufeatures framework. This may need modification in the
> > future if there is a need for userspace to customise the features
> > visible to the guest.
> >
> > Attempts by userspace to write the registers are handled similarly
> > to the current invariant_sys_regs handling: writes are permitted,
> > but only if they don't attempt to change the value. This is
> > sufficient to support VM snapshot/restore from userspace.
> >
> > Because of the additional registers, restoring a VM on an older
> > kernel may not work unless userspace knows how to handle the extra
> > VM registers exposed to the KVM user ABI by this patch.
> >
> > Under the principle of least damage, this patch makes no attempt to
> > handle any of the other registers currently in
> > invariant_sys_regs[], or to emulate registers for AArch32: however,
> > these could be handled in a similar way in future, as necessary.
> >
> > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> > Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
> > Acked-by: Catalin Marinas <catalin.marinas@arm.com>
> > Cc: Christoffer Dall <christoffer.dall@linaro.org>
> > ---
> > arch/arm64/include/asm/sysreg.h | 3 +
> > arch/arm64/kvm/hyp/switch.c | 6 +
> > arch/arm64/kvm/sys_regs.c | 282 +++++++++++++++++++++++++++++++++-------
> > 3 files changed, 246 insertions(+), 45 deletions(-)
> >
> > diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
> > index 4dceb12..609d59af 100644
> > --- a/arch/arm64/include/asm/sysreg.h
> > +++ b/arch/arm64/include/asm/sysreg.h
> > @@ -149,6 +149,9 @@
> > #define SYS_ID_AA64DFR0_EL1 sys_reg(3, 0, 0, 5, 0)
> > #define SYS_ID_AA64DFR1_EL1 sys_reg(3, 0, 0, 5, 1)
> >
> > +#define SYS_ID_AA64AFR0_EL1 sys_reg(3, 0, 0, 5, 4)
> > +#define SYS_ID_AA64AFR1_EL1 sys_reg(3, 0, 0, 5, 5)
> > +
> > #define SYS_ID_AA64ISAR0_EL1 sys_reg(3, 0, 0, 6, 0)
> > #define SYS_ID_AA64ISAR1_EL1 sys_reg(3, 0, 0, 6, 1)
> >
> > diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
> > index 945e79c..35a90b8 100644
> > --- a/arch/arm64/kvm/hyp/switch.c
> > +++ b/arch/arm64/kvm/hyp/switch.c
> > @@ -81,11 +81,17 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu)
> > * it will cause an exception.
> > */
> > val = vcpu->arch.hcr_el2;
> > +
> > if (!(val & HCR_RW) && system_supports_fpsimd()) {
> > write_sysreg(1 << 30, fpexc32_el2);
> > isb();
> > }
> > +
> > + if (val & HCR_RW) /* for AArch64 only: */
> > + val |= HCR_TID3; /* TID3: trap feature register accesses */
> > +
>
> I still think we should set this in vcpu_reset_hcr() and do it once
> instead of adding code in every iteration of the critical path.
Dang, I somehow missed this in the last round.
How about:
diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
index e5df3fc..c87be0d 100644
--- a/arch/arm64/include/asm/kvm_emulate.h
+++ b/arch/arm64/include/asm/kvm_emulate.h
@@ -49,6 +49,14 @@ static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu)
vcpu->arch.hcr_el2 |= HCR_E2H;
if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features))
vcpu->arch.hcr_el2 &= ~HCR_RW;
+
+ /*
+ * TID3: trap feature register accesses that we virtualise.
+ * For now this is conditional, since no AArch32 feature regs
+ * are currently virtualised.
+ */
+ if (vcpu->arch.hcr_el2 & HCR_RW)
+ vcpu->arch.hcr_el2 |= HCR_TID3;
}
static inline unsigned long vcpu_get_hcr(struct kvm_vcpu *vcpu)
>
> Otherwise this patch looks good to me.
I'll probably post this as a separate follow-up patch, unless there's
some other reason for a full respin.
Cheers
---Dave
^ permalink raw reply related [flat|nested] 174+ messages in thread
* [PATCH v5 04/30] arm64: KVM: Hide unsupported AArch64 CPU features from guests
@ 2017-11-01 10:26 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-11-01 10:26 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Nov 01, 2017 at 05:47:29AM +0100, Christoffer Dall wrote:
> On Tue, Oct 31, 2017 at 03:50:56PM +0000, Dave Martin wrote:
> > Currently, a guest kernel sees the true CPU feature registers
> > (ID_*_EL1) when it reads them using MRS instructions. This means
> > that the guest may observe features that are present in the
> > hardware but the host doesn't understand or doesn't provide support
> > for. A guest may legimitately try to use such a feature as per the
> > architecture, but use of the feature may trap instead of working
> > normally, triggering undef injection into the guest.
> >
> > This is not a problem for the host, but the guest may go wrong when
> > running on newer hardware than the host knows about.
> >
> > This patch hides from guest VMs any AArch64-specific CPU features
> > that the host doesn't support, by exposing to the guest the
> > sanitised versions of the registers computed by the cpufeatures
> > framework, instead of the true hardware registers. To achieve
> > this, HCR_EL2.TID3 is now set for AArch64 guests, and emulation
> > code is added to KVM to report the sanitised versions of the
> > affected registers in response to MRS and register reads from
> > userspace.
> >
> > The affected registers are removed from invariant_sys_regs[] (since
> > the invariant_sys_regs handling is no longer quite correct for
> > them) and added to sys_reg_desgs[], with appropriate access(),
> > get_user() and set_user() methods. No runtime vcpu storage is
> > allocated for the registers: instead, they are read on demand from
> > the cpufeatures framework. This may need modification in the
> > future if there is a need for userspace to customise the features
> > visible to the guest.
> >
> > Attempts by userspace to write the registers are handled similarly
> > to the current invariant_sys_regs handling: writes are permitted,
> > but only if they don't attempt to change the value. This is
> > sufficient to support VM snapshot/restore from userspace.
> >
> > Because of the additional registers, restoring a VM on an older
> > kernel may not work unless userspace knows how to handle the extra
> > VM registers exposed to the KVM user ABI by this patch.
> >
> > Under the principle of least damage, this patch makes no attempt to
> > handle any of the other registers currently in
> > invariant_sys_regs[], or to emulate registers for AArch32: however,
> > these could be handled in a similar way in future, as necessary.
> >
> > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> > Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
> > Acked-by: Catalin Marinas <catalin.marinas@arm.com>
> > Cc: Christoffer Dall <christoffer.dall@linaro.org>
> > ---
> > arch/arm64/include/asm/sysreg.h | 3 +
> > arch/arm64/kvm/hyp/switch.c | 6 +
> > arch/arm64/kvm/sys_regs.c | 282 +++++++++++++++++++++++++++++++++-------
> > 3 files changed, 246 insertions(+), 45 deletions(-)
> >
> > diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
> > index 4dceb12..609d59af 100644
> > --- a/arch/arm64/include/asm/sysreg.h
> > +++ b/arch/arm64/include/asm/sysreg.h
> > @@ -149,6 +149,9 @@
> > #define SYS_ID_AA64DFR0_EL1 sys_reg(3, 0, 0, 5, 0)
> > #define SYS_ID_AA64DFR1_EL1 sys_reg(3, 0, 0, 5, 1)
> >
> > +#define SYS_ID_AA64AFR0_EL1 sys_reg(3, 0, 0, 5, 4)
> > +#define SYS_ID_AA64AFR1_EL1 sys_reg(3, 0, 0, 5, 5)
> > +
> > #define SYS_ID_AA64ISAR0_EL1 sys_reg(3, 0, 0, 6, 0)
> > #define SYS_ID_AA64ISAR1_EL1 sys_reg(3, 0, 0, 6, 1)
> >
> > diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
> > index 945e79c..35a90b8 100644
> > --- a/arch/arm64/kvm/hyp/switch.c
> > +++ b/arch/arm64/kvm/hyp/switch.c
> > @@ -81,11 +81,17 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu)
> > * it will cause an exception.
> > */
> > val = vcpu->arch.hcr_el2;
> > +
> > if (!(val & HCR_RW) && system_supports_fpsimd()) {
> > write_sysreg(1 << 30, fpexc32_el2);
> > isb();
> > }
> > +
> > + if (val & HCR_RW) /* for AArch64 only: */
> > + val |= HCR_TID3; /* TID3: trap feature register accesses */
> > +
>
> I still think we should set this in vcpu_reset_hcr() and do it once
> instead of adding code in every iteration of the critical path.
Dang, I somehow missed this in the last round.
How about:
diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
index e5df3fc..c87be0d 100644
--- a/arch/arm64/include/asm/kvm_emulate.h
+++ b/arch/arm64/include/asm/kvm_emulate.h
@@ -49,6 +49,14 @@ static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu)
vcpu->arch.hcr_el2 |= HCR_E2H;
if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features))
vcpu->arch.hcr_el2 &= ~HCR_RW;
+
+ /*
+ * TID3: trap feature register accesses that we virtualise.
+ * For now this is conditional, since no AArch32 feature regs
+ * are currently virtualised.
+ */
+ if (vcpu->arch.hcr_el2 & HCR_RW)
+ vcpu->arch.hcr_el2 |= HCR_TID3;
}
static inline unsigned long vcpu_get_hcr(struct kvm_vcpu *vcpu)
>
> Otherwise this patch looks good to me.
I'll probably post this as a separate follow-up patch, unless there's
some other reason for a full respin.
Cheers
---Dave
^ permalink raw reply related [flat|nested] 174+ messages in thread
* Re: [PATCH v5 01/30] regset: Add support for dynamically sized regsets
2017-10-31 15:50 ` Dave Martin
@ 2017-11-01 11:42 ` Catalin Marinas
-1 siblings, 0 replies; 174+ messages in thread
From: Catalin Marinas @ 2017-11-01 11:42 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel, linux-arch, H. J. Lu, Okamoto Takayuki,
libc-alpha, Ard Biesheuvel, Szabolcs Nagy, Will Deacon,
Oleg Nesterov, Dmitry Safonov, Ingo Molnar, Alexander Viro,
H. Peter Anvin, Thomas Gleixner, Alex Bennée, kvmarm
On Tue, Oct 31, 2017 at 03:50:53PM +0000, Dave P Martin wrote:
> Currently the regset API doesn't allow for the possibility that
> regsets (or at least, the amount of meaningful data in a regset)
> may change in size.
>
> In particular, this results in useless padding being added to
> coredumps if a regset's current size is smaller than its
> theoretical maximum size.
>
> This patch adds a get_size() function to struct user_regset.
> Individual regset implementations can implement this function to
> return the current size of the regset data. A regset_size()
> function is added to provide callers with an abstract interface for
> determining the size of a regset without needing to know whether
> the regset is dynamically sized or not.
>
> The only affected user of this interface is the ELF coredump code:
> This patch ports ELF coredump to dump regsets with their actual
> size in the coredump. This has no effect except for new regsets
> that are dynamically sized and provide a get_size() implementation.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Oleg Nesterov <oleg@redhat.com>
> Cc: Alexander Viro <viro@zeniv.linux.org.uk>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Ingo Molnar <mingo@redhat.com>
> Cc: "H. Peter Anvin" <hpa@zytor.com>
> Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
> Cc: H. J. Lu <hjl.tools@gmail.com>
>
> ---
>
> **Dropped** Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
> **Dropped** Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> (due to bug fix applied against v4 of this patch.)
It seems that the Reviewed-by tags are still there ;). Anyway, on the
new patch:
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 01/30] regset: Add support for dynamically sized regsets
@ 2017-11-01 11:42 ` Catalin Marinas
0 siblings, 0 replies; 174+ messages in thread
From: Catalin Marinas @ 2017-11-01 11:42 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Oct 31, 2017 at 03:50:53PM +0000, Dave P Martin wrote:
> Currently the regset API doesn't allow for the possibility that
> regsets (or at least, the amount of meaningful data in a regset)
> may change in size.
>
> In particular, this results in useless padding being added to
> coredumps if a regset's current size is smaller than its
> theoretical maximum size.
>
> This patch adds a get_size() function to struct user_regset.
> Individual regset implementations can implement this function to
> return the current size of the regset data. A regset_size()
> function is added to provide callers with an abstract interface for
> determining the size of a regset without needing to know whether
> the regset is dynamically sized or not.
>
> The only affected user of this interface is the ELF coredump code:
> This patch ports ELF coredump to dump regsets with their actual
> size in the coredump. This has no effect except for new regsets
> that are dynamically sized and provide a get_size() implementation.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Oleg Nesterov <oleg@redhat.com>
> Cc: Alexander Viro <viro@zeniv.linux.org.uk>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Ingo Molnar <mingo@redhat.com>
> Cc: "H. Peter Anvin" <hpa@zytor.com>
> Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
> Cc: H. J. Lu <hjl.tools@gmail.com>
>
> ---
>
> **Dropped** Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
> **Dropped** Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> (due to bug fix applied against v4 of this patch.)
It seems that the Reviewed-by tags are still there ;). Anyway, on the
new patch:
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 02/30] arm64: fpsimd: Correctly annotate exception helpers called from asm
2017-10-31 15:50 ` Dave Martin
@ 2017-11-01 11:42 ` Catalin Marinas
-1 siblings, 0 replies; 174+ messages in thread
From: Catalin Marinas @ 2017-11-01 11:42 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel, linux-arch, Okamoto Takayuki, libc-alpha,
Ard Biesheuvel, Szabolcs Nagy, Will Deacon, Alex Bennée,
kvmarm
On Tue, Oct 31, 2017 at 03:50:54PM +0000, Dave P Martin wrote:
> A couple of FPSIMD exception handling functions that are called
> from entry.S are currently not annotated as such.
>
> This is not a big deal since asmlinkage does nothing on arm/arm64,
> but fixing the annotations is more consistent and may help avoid
> future surprises.
>
> This patch adds appropriate asmlinkage annotations for
> do_fpsimd_acc() and do_fpsimd_exc().
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 02/30] arm64: fpsimd: Correctly annotate exception helpers called from asm
@ 2017-11-01 11:42 ` Catalin Marinas
0 siblings, 0 replies; 174+ messages in thread
From: Catalin Marinas @ 2017-11-01 11:42 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Oct 31, 2017 at 03:50:54PM +0000, Dave P Martin wrote:
> A couple of FPSIMD exception handling functions that are called
> from entry.S are currently not annotated as such.
>
> This is not a big deal since asmlinkage does nothing on arm/arm64,
> but fixing the annotations is more consistent and may help avoid
> future surprises.
>
> This patch adds appropriate asmlinkage annotations for
> do_fpsimd_acc() and do_fpsimd_exc().
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 03/30] arm64: signal: Verify extra data is user-readable in sys_rt_sigreturn
2017-10-31 15:50 ` Dave Martin
@ 2017-11-01 11:43 ` Catalin Marinas
-1 siblings, 0 replies; 174+ messages in thread
From: Catalin Marinas @ 2017-11-01 11:43 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel, linux-arch, Okamoto Takayuki, libc-alpha,
Ard Biesheuvel, Szabolcs Nagy, Will Deacon, Alex Bennée,
kvmarm
On Tue, Oct 31, 2017 at 03:50:55PM +0000, Dave P Martin wrote:
> Currently sys_rt_sigreturn() verifies that the base sigframe is
> readable, but no similar check is performed on the extra data to
> which an extra_context record points.
>
> This matters because the extra data will be read with the
> unprotected user accessors. However, this is not a problem at
> present because the extra data base address is required to be
> exactly at the end of the base sigframe. So, there would need to
> be a non-user-readable kernel address within about 59K
> (SIGFRAME_MAXSZ - sizeof(struct rt_sigframe)) of some address for
> which access_ok(VERIFY_READ) returns true, in order for sigreturn
> to be able to read kernel memory that should be inaccessible to the
> user task. This is currently impossible due to the untranslatable
> address hole between the TTBR0 and TTBR1 address ranges.
>
> Disappearance of the hole between the TTBR0 and TTBR1 mapping
> ranges would require the VA size for TTBR0 and TTBR1 to grow to at
> least 55 bits, and either the disabling of tagged pointers for
> userspace or enabling of tagged pointers for kernel space; none of
> which is currently envisaged.
>
> Even so, it is wrong to use the unprotected user accessors without
> an accompanying access_ok() check.
>
> To avoid the potential for future surprises, this patch does an
> explicit access_ok() check on the extra data space when parsing an
> extra_context record.
>
> Fixes: 33f082614c34 ("arm64: signal: Allow expansion of the signal frame")
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 03/30] arm64: signal: Verify extra data is user-readable in sys_rt_sigreturn
@ 2017-11-01 11:43 ` Catalin Marinas
0 siblings, 0 replies; 174+ messages in thread
From: Catalin Marinas @ 2017-11-01 11:43 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Oct 31, 2017 at 03:50:55PM +0000, Dave P Martin wrote:
> Currently sys_rt_sigreturn() verifies that the base sigframe is
> readable, but no similar check is performed on the extra data to
> which an extra_context record points.
>
> This matters because the extra data will be read with the
> unprotected user accessors. However, this is not a problem at
> present because the extra data base address is required to be
> exactly at the end of the base sigframe. So, there would need to
> be a non-user-readable kernel address within about 59K
> (SIGFRAME_MAXSZ - sizeof(struct rt_sigframe)) of some address for
> which access_ok(VERIFY_READ) returns true, in order for sigreturn
> to be able to read kernel memory that should be inaccessible to the
> user task. This is currently impossible due to the untranslatable
> address hole between the TTBR0 and TTBR1 address ranges.
>
> Disappearance of the hole between the TTBR0 and TTBR1 mapping
> ranges would require the VA size for TTBR0 and TTBR1 to grow to at
> least 55 bits, and either the disabling of tagged pointers for
> userspace or enabling of tagged pointers for kernel space; none of
> which is currently envisaged.
>
> Even so, it is wrong to use the unprotected user accessors without
> an accompanying access_ok() check.
>
> To avoid the potential for future surprises, this patch does an
> explicit access_ok() check on the extra data space when parsing an
> extra_context record.
>
> Fixes: 33f082614c34 ("arm64: signal: Allow expansion of the signal frame")
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 01/30] regset: Add support for dynamically sized regsets
2017-11-01 11:42 ` Catalin Marinas
@ 2017-11-01 13:16 ` Dave Martin
-1 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-11-01 13:16 UTC (permalink / raw)
To: Catalin Marinas
Cc: linux-arch, H. J. Lu, Okamoto Takayuki, libc-alpha,
Ard Biesheuvel, Szabolcs Nagy, Dmitry Safonov, Will Deacon,
Oleg Nesterov, Ingo Molnar, Alexander Viro, H. Peter Anvin,
Thomas Gleixner, Alex Bennée, kvmarm, linux-arm-kernel
On Wed, Nov 01, 2017 at 11:42:29AM +0000, Catalin Marinas wrote:
> On Tue, Oct 31, 2017 at 03:50:53PM +0000, Dave P Martin wrote:
> > Currently the regset API doesn't allow for the possibility that
> > regsets (or at least, the amount of meaningful data in a regset)
> > may change in size.
> >
> > In particular, this results in useless padding being added to
> > coredumps if a regset's current size is smaller than its
> > theoretical maximum size.
> >
> > This patch adds a get_size() function to struct user_regset.
> > Individual regset implementations can implement this function to
> > return the current size of the regset data. A regset_size()
> > function is added to provide callers with an abstract interface for
> > determining the size of a regset without needing to know whether
> > the regset is dynamically sized or not.
> >
> > The only affected user of this interface is the ELF coredump code:
> > This patch ports ELF coredump to dump regsets with their actual
> > size in the coredump. This has no effect except for new regsets
> > that are dynamically sized and provide a get_size() implementation.
> >
> > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> > Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
> > Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> > Cc: Oleg Nesterov <oleg@redhat.com>
> > Cc: Alexander Viro <viro@zeniv.linux.org.uk>
> > Cc: Thomas Gleixner <tglx@linutronix.de>
> > Cc: Ingo Molnar <mingo@redhat.com>
> > Cc: "H. Peter Anvin" <hpa@zytor.com>
> > Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
> > Cc: H. J. Lu <hjl.tools@gmail.com>
> >
> > ---
> >
> > **Dropped** Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
> > **Dropped** Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> > (due to bug fix applied against v4 of this patch.)
>
> It seems that the Reviewed-by tags are still there ;). Anyway, on the
Oops, looks like that only happened on this patch. I've removed
Alex's R-b from my own version in case of repost -- can you also
do the same?
> new patch:
>
> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 01/30] regset: Add support for dynamically sized regsets
@ 2017-11-01 13:16 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-11-01 13:16 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Nov 01, 2017 at 11:42:29AM +0000, Catalin Marinas wrote:
> On Tue, Oct 31, 2017 at 03:50:53PM +0000, Dave P Martin wrote:
> > Currently the regset API doesn't allow for the possibility that
> > regsets (or at least, the amount of meaningful data in a regset)
> > may change in size.
> >
> > In particular, this results in useless padding being added to
> > coredumps if a regset's current size is smaller than its
> > theoretical maximum size.
> >
> > This patch adds a get_size() function to struct user_regset.
> > Individual regset implementations can implement this function to
> > return the current size of the regset data. A regset_size()
> > function is added to provide callers with an abstract interface for
> > determining the size of a regset without needing to know whether
> > the regset is dynamically sized or not.
> >
> > The only affected user of this interface is the ELF coredump code:
> > This patch ports ELF coredump to dump regsets with their actual
> > size in the coredump. This has no effect except for new regsets
> > that are dynamically sized and provide a get_size() implementation.
> >
> > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> > Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
> > Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> > Cc: Oleg Nesterov <oleg@redhat.com>
> > Cc: Alexander Viro <viro@zeniv.linux.org.uk>
> > Cc: Thomas Gleixner <tglx@linutronix.de>
> > Cc: Ingo Molnar <mingo@redhat.com>
> > Cc: "H. Peter Anvin" <hpa@zytor.com>
> > Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
> > Cc: H. J. Lu <hjl.tools@gmail.com>
> >
> > ---
> >
> > **Dropped** Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
> > **Dropped** Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> > (due to bug fix applied against v4 of this patch.)
>
> It seems that the Reviewed-by tags are still there ;). Anyway, on the
Oops, looks like that only happened on this patch. I've removed
Alex's R-b from my own version in case of repost -- can you also
do the same?
> new patch:
>
> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 15/30] arm64/sve: Signal handling support
2017-10-31 15:51 ` Dave Martin
@ 2017-11-01 14:33 ` Catalin Marinas
-1 siblings, 0 replies; 174+ messages in thread
From: Catalin Marinas @ 2017-11-01 14:33 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel, linux-arch, Okamoto Takayuki, libc-alpha,
Ard Biesheuvel, Szabolcs Nagy, Will Deacon, Alex Bennée,
kvmarm
On Tue, Oct 31, 2017 at 03:51:07PM +0000, Dave P Martin wrote:
> This patch implements support for saving and restoring the SVE
> registers around signals.
>
> A fixed-size header struct sve_context is always included in the
> signal frame encoding the thread's vector length at the time of
> signal delivery, optionally followed by a variable-layout structure
> encoding the SVE registers.
>
> Because of the need to preserve backwards compatibility, the FPSIMD
> view of the SVE registers is always dumped as a struct
> fpsimd_context in the usual way, in addition to any sve_context.
>
> The SVE vector registers are dumped in full, including bits 127:0
> of each register which alias the corresponding FPSIMD vector
> registers in the hardware. To avoid any ambiguity about which
> alias to restore during sigreturn, the kernel always restores bits
> 127:0 of each SVE vector register from the fpsimd_context in the
> signal frame (which must be present): userspace needs to take this
> into account if it wants to modify the SVE vector register contents
> on return from a signal.
>
> FPSR and FPCR, which are used by both FPSIMD and SVE, are not
> included in sve_context because they are always present in
> fpsimd_context anyway.
>
> For signal delivery, a new helper
> fpsimd_signal_preserve_current_state() is added to update _both_
> the FPSIMD and SVE views in the task struct, to make it easier to
> populate this information into the signal frame. Because of the
> redundancy between the two views of the state, only one is updated
> otherwise.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Cc: Alex Bennée <alex.bennee@linaro.org>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 15/30] arm64/sve: Signal handling support
@ 2017-11-01 14:33 ` Catalin Marinas
0 siblings, 0 replies; 174+ messages in thread
From: Catalin Marinas @ 2017-11-01 14:33 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Oct 31, 2017 at 03:51:07PM +0000, Dave P Martin wrote:
> This patch implements support for saving and restoring the SVE
> registers around signals.
>
> A fixed-size header struct sve_context is always included in the
> signal frame encoding the thread's vector length at the time of
> signal delivery, optionally followed by a variable-layout structure
> encoding the SVE registers.
>
> Because of the need to preserve backwards compatibility, the FPSIMD
> view of the SVE registers is always dumped as a struct
> fpsimd_context in the usual way, in addition to any sve_context.
>
> The SVE vector registers are dumped in full, including bits 127:0
> of each register which alias the corresponding FPSIMD vector
> registers in the hardware. To avoid any ambiguity about which
> alias to restore during sigreturn, the kernel always restores bits
> 127:0 of each SVE vector register from the fpsimd_context in the
> signal frame (which must be present): userspace needs to take this
> into account if it wants to modify the SVE vector register contents
> on return from a signal.
>
> FPSR and FPCR, which are used by both FPSIMD and SVE, are not
> included in sve_context because they are always present in
> fpsimd_context anyway.
>
> For signal delivery, a new helper
> fpsimd_signal_preserve_current_state() is added to update _both_
> the FPSIMD and SVE views in the task struct, to make it easier to
> populate this information into the signal frame. Because of the
> redundancy between the two views of the state, only one is updated
> otherwise.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Cc: Alex Benn?e <alex.bennee@linaro.org>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 04/30] arm64: KVM: Hide unsupported AArch64 CPU features from guests
2017-11-01 10:26 ` Dave Martin
@ 2017-11-02 8:15 ` Christoffer Dall
-1 siblings, 0 replies; 174+ messages in thread
From: Christoffer Dall @ 2017-11-02 8:15 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arch, Okamoto Takayuki, libc-alpha, Ard Biesheuvel,
Szabolcs Nagy, Catalin Marinas, Will Deacon, Christoffer Dall,
Alex Bennée, kvmarm, linux-arm-kernel
On Wed, Nov 01, 2017 at 10:26:03AM +0000, Dave Martin wrote:
> On Wed, Nov 01, 2017 at 05:47:29AM +0100, Christoffer Dall wrote:
> > On Tue, Oct 31, 2017 at 03:50:56PM +0000, Dave Martin wrote:
> > > Currently, a guest kernel sees the true CPU feature registers
> > > (ID_*_EL1) when it reads them using MRS instructions. This means
> > > that the guest may observe features that are present in the
> > > hardware but the host doesn't understand or doesn't provide support
> > > for. A guest may legimitately try to use such a feature as per the
> > > architecture, but use of the feature may trap instead of working
> > > normally, triggering undef injection into the guest.
> > >
> > > This is not a problem for the host, but the guest may go wrong when
> > > running on newer hardware than the host knows about.
> > >
> > > This patch hides from guest VMs any AArch64-specific CPU features
> > > that the host doesn't support, by exposing to the guest the
> > > sanitised versions of the registers computed by the cpufeatures
> > > framework, instead of the true hardware registers. To achieve
> > > this, HCR_EL2.TID3 is now set for AArch64 guests, and emulation
> > > code is added to KVM to report the sanitised versions of the
> > > affected registers in response to MRS and register reads from
> > > userspace.
> > >
> > > The affected registers are removed from invariant_sys_regs[] (since
> > > the invariant_sys_regs handling is no longer quite correct for
> > > them) and added to sys_reg_desgs[], with appropriate access(),
> > > get_user() and set_user() methods. No runtime vcpu storage is
> > > allocated for the registers: instead, they are read on demand from
> > > the cpufeatures framework. This may need modification in the
> > > future if there is a need for userspace to customise the features
> > > visible to the guest.
> > >
> > > Attempts by userspace to write the registers are handled similarly
> > > to the current invariant_sys_regs handling: writes are permitted,
> > > but only if they don't attempt to change the value. This is
> > > sufficient to support VM snapshot/restore from userspace.
> > >
> > > Because of the additional registers, restoring a VM on an older
> > > kernel may not work unless userspace knows how to handle the extra
> > > VM registers exposed to the KVM user ABI by this patch.
> > >
> > > Under the principle of least damage, this patch makes no attempt to
> > > handle any of the other registers currently in
> > > invariant_sys_regs[], or to emulate registers for AArch32: however,
> > > these could be handled in a similar way in future, as necessary.
> > >
> > > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> > > Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
> > > Acked-by: Catalin Marinas <catalin.marinas@arm.com>
> > > Cc: Christoffer Dall <christoffer.dall@linaro.org>
> > > ---
> > > arch/arm64/include/asm/sysreg.h | 3 +
> > > arch/arm64/kvm/hyp/switch.c | 6 +
> > > arch/arm64/kvm/sys_regs.c | 282 +++++++++++++++++++++++++++++++++-------
> > > 3 files changed, 246 insertions(+), 45 deletions(-)
> > >
> > > diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
> > > index 4dceb12..609d59af 100644
> > > --- a/arch/arm64/include/asm/sysreg.h
> > > +++ b/arch/arm64/include/asm/sysreg.h
> > > @@ -149,6 +149,9 @@
> > > #define SYS_ID_AA64DFR0_EL1 sys_reg(3, 0, 0, 5, 0)
> > > #define SYS_ID_AA64DFR1_EL1 sys_reg(3, 0, 0, 5, 1)
> > >
> > > +#define SYS_ID_AA64AFR0_EL1 sys_reg(3, 0, 0, 5, 4)
> > > +#define SYS_ID_AA64AFR1_EL1 sys_reg(3, 0, 0, 5, 5)
> > > +
> > > #define SYS_ID_AA64ISAR0_EL1 sys_reg(3, 0, 0, 6, 0)
> > > #define SYS_ID_AA64ISAR1_EL1 sys_reg(3, 0, 0, 6, 1)
> > >
> > > diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
> > > index 945e79c..35a90b8 100644
> > > --- a/arch/arm64/kvm/hyp/switch.c
> > > +++ b/arch/arm64/kvm/hyp/switch.c
> > > @@ -81,11 +81,17 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu)
> > > * it will cause an exception.
> > > */
> > > val = vcpu->arch.hcr_el2;
> > > +
> > > if (!(val & HCR_RW) && system_supports_fpsimd()) {
> > > write_sysreg(1 << 30, fpexc32_el2);
> > > isb();
> > > }
> > > +
> > > + if (val & HCR_RW) /* for AArch64 only: */
> > > + val |= HCR_TID3; /* TID3: trap feature register accesses */
> > > +
> >
> > I still think we should set this in vcpu_reset_hcr() and do it once
> > instead of adding code in every iteration of the critical path.
>
> Dang, I somehow missed this in the last round.
>
> How about:
>
> diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
> index e5df3fc..c87be0d 100644
> --- a/arch/arm64/include/asm/kvm_emulate.h
> +++ b/arch/arm64/include/asm/kvm_emulate.h
> @@ -49,6 +49,14 @@ static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu)
> vcpu->arch.hcr_el2 |= HCR_E2H;
> if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features))
> vcpu->arch.hcr_el2 &= ~HCR_RW;
> +
> + /*
> + * TID3: trap feature register accesses that we virtualise.
> + * For now this is conditional, since no AArch32 feature regs
> + * are currently virtualised.
> + */
> + if (vcpu->arch.hcr_el2 & HCR_RW)
> + vcpu->arch.hcr_el2 |= HCR_TID3;
> }
>
> static inline unsigned long vcpu_get_hcr(struct kvm_vcpu *vcpu)
> >
> > Otherwise this patch looks good to me.
>
> I'll probably post this as a separate follow-up patch, unless there's
> some other reason for a full respin.
>
Fine with me, just remember to remove the part of the world-switch that
was added in this patch, as that's what we want to savoid.
Thanks,
-Christoffer
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 04/30] arm64: KVM: Hide unsupported AArch64 CPU features from guests
@ 2017-11-02 8:15 ` Christoffer Dall
0 siblings, 0 replies; 174+ messages in thread
From: Christoffer Dall @ 2017-11-02 8:15 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Nov 01, 2017 at 10:26:03AM +0000, Dave Martin wrote:
> On Wed, Nov 01, 2017 at 05:47:29AM +0100, Christoffer Dall wrote:
> > On Tue, Oct 31, 2017 at 03:50:56PM +0000, Dave Martin wrote:
> > > Currently, a guest kernel sees the true CPU feature registers
> > > (ID_*_EL1) when it reads them using MRS instructions. This means
> > > that the guest may observe features that are present in the
> > > hardware but the host doesn't understand or doesn't provide support
> > > for. A guest may legimitately try to use such a feature as per the
> > > architecture, but use of the feature may trap instead of working
> > > normally, triggering undef injection into the guest.
> > >
> > > This is not a problem for the host, but the guest may go wrong when
> > > running on newer hardware than the host knows about.
> > >
> > > This patch hides from guest VMs any AArch64-specific CPU features
> > > that the host doesn't support, by exposing to the guest the
> > > sanitised versions of the registers computed by the cpufeatures
> > > framework, instead of the true hardware registers. To achieve
> > > this, HCR_EL2.TID3 is now set for AArch64 guests, and emulation
> > > code is added to KVM to report the sanitised versions of the
> > > affected registers in response to MRS and register reads from
> > > userspace.
> > >
> > > The affected registers are removed from invariant_sys_regs[] (since
> > > the invariant_sys_regs handling is no longer quite correct for
> > > them) and added to sys_reg_desgs[], with appropriate access(),
> > > get_user() and set_user() methods. No runtime vcpu storage is
> > > allocated for the registers: instead, they are read on demand from
> > > the cpufeatures framework. This may need modification in the
> > > future if there is a need for userspace to customise the features
> > > visible to the guest.
> > >
> > > Attempts by userspace to write the registers are handled similarly
> > > to the current invariant_sys_regs handling: writes are permitted,
> > > but only if they don't attempt to change the value. This is
> > > sufficient to support VM snapshot/restore from userspace.
> > >
> > > Because of the additional registers, restoring a VM on an older
> > > kernel may not work unless userspace knows how to handle the extra
> > > VM registers exposed to the KVM user ABI by this patch.
> > >
> > > Under the principle of least damage, this patch makes no attempt to
> > > handle any of the other registers currently in
> > > invariant_sys_regs[], or to emulate registers for AArch32: however,
> > > these could be handled in a similar way in future, as necessary.
> > >
> > > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> > > Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
> > > Acked-by: Catalin Marinas <catalin.marinas@arm.com>
> > > Cc: Christoffer Dall <christoffer.dall@linaro.org>
> > > ---
> > > arch/arm64/include/asm/sysreg.h | 3 +
> > > arch/arm64/kvm/hyp/switch.c | 6 +
> > > arch/arm64/kvm/sys_regs.c | 282 +++++++++++++++++++++++++++++++++-------
> > > 3 files changed, 246 insertions(+), 45 deletions(-)
> > >
> > > diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
> > > index 4dceb12..609d59af 100644
> > > --- a/arch/arm64/include/asm/sysreg.h
> > > +++ b/arch/arm64/include/asm/sysreg.h
> > > @@ -149,6 +149,9 @@
> > > #define SYS_ID_AA64DFR0_EL1 sys_reg(3, 0, 0, 5, 0)
> > > #define SYS_ID_AA64DFR1_EL1 sys_reg(3, 0, 0, 5, 1)
> > >
> > > +#define SYS_ID_AA64AFR0_EL1 sys_reg(3, 0, 0, 5, 4)
> > > +#define SYS_ID_AA64AFR1_EL1 sys_reg(3, 0, 0, 5, 5)
> > > +
> > > #define SYS_ID_AA64ISAR0_EL1 sys_reg(3, 0, 0, 6, 0)
> > > #define SYS_ID_AA64ISAR1_EL1 sys_reg(3, 0, 0, 6, 1)
> > >
> > > diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
> > > index 945e79c..35a90b8 100644
> > > --- a/arch/arm64/kvm/hyp/switch.c
> > > +++ b/arch/arm64/kvm/hyp/switch.c
> > > @@ -81,11 +81,17 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu)
> > > * it will cause an exception.
> > > */
> > > val = vcpu->arch.hcr_el2;
> > > +
> > > if (!(val & HCR_RW) && system_supports_fpsimd()) {
> > > write_sysreg(1 << 30, fpexc32_el2);
> > > isb();
> > > }
> > > +
> > > + if (val & HCR_RW) /* for AArch64 only: */
> > > + val |= HCR_TID3; /* TID3: trap feature register accesses */
> > > +
> >
> > I still think we should set this in vcpu_reset_hcr() and do it once
> > instead of adding code in every iteration of the critical path.
>
> Dang, I somehow missed this in the last round.
>
> How about:
>
> diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
> index e5df3fc..c87be0d 100644
> --- a/arch/arm64/include/asm/kvm_emulate.h
> +++ b/arch/arm64/include/asm/kvm_emulate.h
> @@ -49,6 +49,14 @@ static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu)
> vcpu->arch.hcr_el2 |= HCR_E2H;
> if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features))
> vcpu->arch.hcr_el2 &= ~HCR_RW;
> +
> + /*
> + * TID3: trap feature register accesses that we virtualise.
> + * For now this is conditional, since no AArch32 feature regs
> + * are currently virtualised.
> + */
> + if (vcpu->arch.hcr_el2 & HCR_RW)
> + vcpu->arch.hcr_el2 |= HCR_TID3;
> }
>
> static inline unsigned long vcpu_get_hcr(struct kvm_vcpu *vcpu)
> >
> > Otherwise this patch looks good to me.
>
> I'll probably post this as a separate follow-up patch, unless there's
> some other reason for a full respin.
>
Fine with me, just remember to remove the part of the world-switch that
was added in this patch, as that's what we want to savoid.
Thanks,
-Christoffer
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 04/30] arm64: KVM: Hide unsupported AArch64 CPU features from guests
2017-11-02 8:15 ` Christoffer Dall
@ 2017-11-02 9:20 ` Dave Martin
-1 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-11-02 9:20 UTC (permalink / raw)
To: Christoffer Dall
Cc: linux-arch, Okamoto Takayuki, libc-alpha, Ard Biesheuvel,
Szabolcs Nagy, Catalin Marinas, Will Deacon, linux-arm-kernel,
Alex Bennée, kvmarm, Christoffer Dall
On Thu, Nov 02, 2017 at 09:15:57AM +0100, Christoffer Dall wrote:
> On Wed, Nov 01, 2017 at 10:26:03AM +0000, Dave Martin wrote:
> > On Wed, Nov 01, 2017 at 05:47:29AM +0100, Christoffer Dall wrote:
> > > On Tue, Oct 31, 2017 at 03:50:56PM +0000, Dave Martin wrote:
> > > > Currently, a guest kernel sees the true CPU feature registers
> > > > (ID_*_EL1) when it reads them using MRS instructions. This means
> > > > that the guest may observe features that are present in the
> > > > hardware but the host doesn't understand or doesn't provide support
> > > > for. A guest may legimitately try to use such a feature as per the
> > > > architecture, but use of the feature may trap instead of working
> > > > normally, triggering undef injection into the guest.
> > > >
> > > > This is not a problem for the host, but the guest may go wrong when
> > > > running on newer hardware than the host knows about.
> > > >
> > > > This patch hides from guest VMs any AArch64-specific CPU features
> > > > that the host doesn't support, by exposing to the guest the
> > > > sanitised versions of the registers computed by the cpufeatures
> > > > framework, instead of the true hardware registers. To achieve
> > > > this, HCR_EL2.TID3 is now set for AArch64 guests, and emulation
> > > > code is added to KVM to report the sanitised versions of the
> > > > affected registers in response to MRS and register reads from
> > > > userspace.
> > > >
> > > > The affected registers are removed from invariant_sys_regs[] (since
> > > > the invariant_sys_regs handling is no longer quite correct for
> > > > them) and added to sys_reg_desgs[], with appropriate access(),
> > > > get_user() and set_user() methods. No runtime vcpu storage is
> > > > allocated for the registers: instead, they are read on demand from
> > > > the cpufeatures framework. This may need modification in the
> > > > future if there is a need for userspace to customise the features
> > > > visible to the guest.
> > > >
> > > > Attempts by userspace to write the registers are handled similarly
> > > > to the current invariant_sys_regs handling: writes are permitted,
> > > > but only if they don't attempt to change the value. This is
> > > > sufficient to support VM snapshot/restore from userspace.
> > > >
> > > > Because of the additional registers, restoring a VM on an older
> > > > kernel may not work unless userspace knows how to handle the extra
> > > > VM registers exposed to the KVM user ABI by this patch.
> > > >
> > > > Under the principle of least damage, this patch makes no attempt to
> > > > handle any of the other registers currently in
> > > > invariant_sys_regs[], or to emulate registers for AArch32: however,
> > > > these could be handled in a similar way in future, as necessary.
> > > >
> > > > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> > > > Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
> > > > Acked-by: Catalin Marinas <catalin.marinas@arm.com>
> > > > Cc: Christoffer Dall <christoffer.dall@linaro.org>
> > > > ---
> > > > arch/arm64/include/asm/sysreg.h | 3 +
> > > > arch/arm64/kvm/hyp/switch.c | 6 +
> > > > arch/arm64/kvm/sys_regs.c | 282 +++++++++++++++++++++++++++++++++-------
> > > > 3 files changed, 246 insertions(+), 45 deletions(-)
> > > >
> > > > diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
> > > > index 4dceb12..609d59af 100644
> > > > --- a/arch/arm64/include/asm/sysreg.h
> > > > +++ b/arch/arm64/include/asm/sysreg.h
> > > > @@ -149,6 +149,9 @@
> > > > #define SYS_ID_AA64DFR0_EL1 sys_reg(3, 0, 0, 5, 0)
> > > > #define SYS_ID_AA64DFR1_EL1 sys_reg(3, 0, 0, 5, 1)
> > > >
> > > > +#define SYS_ID_AA64AFR0_EL1 sys_reg(3, 0, 0, 5, 4)
> > > > +#define SYS_ID_AA64AFR1_EL1 sys_reg(3, 0, 0, 5, 5)
> > > > +
> > > > #define SYS_ID_AA64ISAR0_EL1 sys_reg(3, 0, 0, 6, 0)
> > > > #define SYS_ID_AA64ISAR1_EL1 sys_reg(3, 0, 0, 6, 1)
> > > >
> > > > diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
> > > > index 945e79c..35a90b8 100644
> > > > --- a/arch/arm64/kvm/hyp/switch.c
> > > > +++ b/arch/arm64/kvm/hyp/switch.c
> > > > @@ -81,11 +81,17 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu)
> > > > * it will cause an exception.
> > > > */
> > > > val = vcpu->arch.hcr_el2;
> > > > +
> > > > if (!(val & HCR_RW) && system_supports_fpsimd()) {
> > > > write_sysreg(1 << 30, fpexc32_el2);
> > > > isb();
> > > > }
> > > > +
> > > > + if (val & HCR_RW) /* for AArch64 only: */
> > > > + val |= HCR_TID3; /* TID3: trap feature register accesses */
> > > > +
> > >
> > > I still think we should set this in vcpu_reset_hcr() and do it once
> > > instead of adding code in every iteration of the critical path.
> >
> > Dang, I somehow missed this in the last round.
> >
> > How about:
> >
> > diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
> > index e5df3fc..c87be0d 100644
> > --- a/arch/arm64/include/asm/kvm_emulate.h
> > +++ b/arch/arm64/include/asm/kvm_emulate.h
> > @@ -49,6 +49,14 @@ static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu)
> > vcpu->arch.hcr_el2 |= HCR_E2H;
> > if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features))
> > vcpu->arch.hcr_el2 &= ~HCR_RW;
> > +
> > + /*
> > + * TID3: trap feature register accesses that we virtualise.
> > + * For now this is conditional, since no AArch32 feature regs
> > + * are currently virtualised.
> > + */
> > + if (vcpu->arch.hcr_el2 & HCR_RW)
> > + vcpu->arch.hcr_el2 |= HCR_TID3;
> > }
> >
> > static inline unsigned long vcpu_get_hcr(struct kvm_vcpu *vcpu)
> > >
> > > Otherwise this patch looks good to me.
> >
> > I'll probably post this as a separate follow-up patch, unless there's
> > some other reason for a full respin.
> >
>
> Fine with me, just remember to remove the part of the world-switch that
> was added in this patch, as that's what we want to savoid.
Agreed. My patch already did that, but I assumed that part of the diff
was uninteresting...
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 04/30] arm64: KVM: Hide unsupported AArch64 CPU features from guests
@ 2017-11-02 9:20 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-11-02 9:20 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Nov 02, 2017 at 09:15:57AM +0100, Christoffer Dall wrote:
> On Wed, Nov 01, 2017 at 10:26:03AM +0000, Dave Martin wrote:
> > On Wed, Nov 01, 2017 at 05:47:29AM +0100, Christoffer Dall wrote:
> > > On Tue, Oct 31, 2017 at 03:50:56PM +0000, Dave Martin wrote:
> > > > Currently, a guest kernel sees the true CPU feature registers
> > > > (ID_*_EL1) when it reads them using MRS instructions. This means
> > > > that the guest may observe features that are present in the
> > > > hardware but the host doesn't understand or doesn't provide support
> > > > for. A guest may legimitately try to use such a feature as per the
> > > > architecture, but use of the feature may trap instead of working
> > > > normally, triggering undef injection into the guest.
> > > >
> > > > This is not a problem for the host, but the guest may go wrong when
> > > > running on newer hardware than the host knows about.
> > > >
> > > > This patch hides from guest VMs any AArch64-specific CPU features
> > > > that the host doesn't support, by exposing to the guest the
> > > > sanitised versions of the registers computed by the cpufeatures
> > > > framework, instead of the true hardware registers. To achieve
> > > > this, HCR_EL2.TID3 is now set for AArch64 guests, and emulation
> > > > code is added to KVM to report the sanitised versions of the
> > > > affected registers in response to MRS and register reads from
> > > > userspace.
> > > >
> > > > The affected registers are removed from invariant_sys_regs[] (since
> > > > the invariant_sys_regs handling is no longer quite correct for
> > > > them) and added to sys_reg_desgs[], with appropriate access(),
> > > > get_user() and set_user() methods. No runtime vcpu storage is
> > > > allocated for the registers: instead, they are read on demand from
> > > > the cpufeatures framework. This may need modification in the
> > > > future if there is a need for userspace to customise the features
> > > > visible to the guest.
> > > >
> > > > Attempts by userspace to write the registers are handled similarly
> > > > to the current invariant_sys_regs handling: writes are permitted,
> > > > but only if they don't attempt to change the value. This is
> > > > sufficient to support VM snapshot/restore from userspace.
> > > >
> > > > Because of the additional registers, restoring a VM on an older
> > > > kernel may not work unless userspace knows how to handle the extra
> > > > VM registers exposed to the KVM user ABI by this patch.
> > > >
> > > > Under the principle of least damage, this patch makes no attempt to
> > > > handle any of the other registers currently in
> > > > invariant_sys_regs[], or to emulate registers for AArch32: however,
> > > > these could be handled in a similar way in future, as necessary.
> > > >
> > > > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> > > > Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
> > > > Acked-by: Catalin Marinas <catalin.marinas@arm.com>
> > > > Cc: Christoffer Dall <christoffer.dall@linaro.org>
> > > > ---
> > > > arch/arm64/include/asm/sysreg.h | 3 +
> > > > arch/arm64/kvm/hyp/switch.c | 6 +
> > > > arch/arm64/kvm/sys_regs.c | 282 +++++++++++++++++++++++++++++++++-------
> > > > 3 files changed, 246 insertions(+), 45 deletions(-)
> > > >
> > > > diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
> > > > index 4dceb12..609d59af 100644
> > > > --- a/arch/arm64/include/asm/sysreg.h
> > > > +++ b/arch/arm64/include/asm/sysreg.h
> > > > @@ -149,6 +149,9 @@
> > > > #define SYS_ID_AA64DFR0_EL1 sys_reg(3, 0, 0, 5, 0)
> > > > #define SYS_ID_AA64DFR1_EL1 sys_reg(3, 0, 0, 5, 1)
> > > >
> > > > +#define SYS_ID_AA64AFR0_EL1 sys_reg(3, 0, 0, 5, 4)
> > > > +#define SYS_ID_AA64AFR1_EL1 sys_reg(3, 0, 0, 5, 5)
> > > > +
> > > > #define SYS_ID_AA64ISAR0_EL1 sys_reg(3, 0, 0, 6, 0)
> > > > #define SYS_ID_AA64ISAR1_EL1 sys_reg(3, 0, 0, 6, 1)
> > > >
> > > > diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
> > > > index 945e79c..35a90b8 100644
> > > > --- a/arch/arm64/kvm/hyp/switch.c
> > > > +++ b/arch/arm64/kvm/hyp/switch.c
> > > > @@ -81,11 +81,17 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu)
> > > > * it will cause an exception.
> > > > */
> > > > val = vcpu->arch.hcr_el2;
> > > > +
> > > > if (!(val & HCR_RW) && system_supports_fpsimd()) {
> > > > write_sysreg(1 << 30, fpexc32_el2);
> > > > isb();
> > > > }
> > > > +
> > > > + if (val & HCR_RW) /* for AArch64 only: */
> > > > + val |= HCR_TID3; /* TID3: trap feature register accesses */
> > > > +
> > >
> > > I still think we should set this in vcpu_reset_hcr() and do it once
> > > instead of adding code in every iteration of the critical path.
> >
> > Dang, I somehow missed this in the last round.
> >
> > How about:
> >
> > diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
> > index e5df3fc..c87be0d 100644
> > --- a/arch/arm64/include/asm/kvm_emulate.h
> > +++ b/arch/arm64/include/asm/kvm_emulate.h
> > @@ -49,6 +49,14 @@ static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu)
> > vcpu->arch.hcr_el2 |= HCR_E2H;
> > if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features))
> > vcpu->arch.hcr_el2 &= ~HCR_RW;
> > +
> > + /*
> > + * TID3: trap feature register accesses that we virtualise.
> > + * For now this is conditional, since no AArch32 feature regs
> > + * are currently virtualised.
> > + */
> > + if (vcpu->arch.hcr_el2 & HCR_RW)
> > + vcpu->arch.hcr_el2 |= HCR_TID3;
> > }
> >
> > static inline unsigned long vcpu_get_hcr(struct kvm_vcpu *vcpu)
> > >
> > > Otherwise this patch looks good to me.
> >
> > I'll probably post this as a separate follow-up patch, unless there's
> > some other reason for a full respin.
> >
>
> Fine with me, just remember to remove the part of the world-switch that
> was added in this patch, as that's what we want to savoid.
Agreed. My patch already did that, but I assumed that part of the diff
was uninteresting...
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 04/30] arm64: KVM: Hide unsupported AArch64 CPU features from guests
2017-11-02 8:15 ` Christoffer Dall
@ 2017-11-02 11:01 ` Dave Martin
-1 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-11-02 11:01 UTC (permalink / raw)
To: Christoffer Dall
Cc: linux-arch, Okamoto Takayuki, libc-alpha, Ard Biesheuvel,
Szabolcs Nagy, Catalin Marinas, Will Deacon, linux-arm-kernel,
Alex Bennée, kvmarm, Christoffer Dall
On Thu, Nov 02, 2017 at 09:15:57AM +0100, Christoffer Dall wrote:
> On Wed, Nov 01, 2017 at 10:26:03AM +0000, Dave Martin wrote:
> > On Wed, Nov 01, 2017 at 05:47:29AM +0100, Christoffer Dall wrote:
> > > On Tue, Oct 31, 2017 at 03:50:56PM +0000, Dave Martin wrote:
> > > > Currently, a guest kernel sees the true CPU feature registers
> > > > (ID_*_EL1) when it reads them using MRS instructions. This means
> > > > that the guest may observe features that are present in the
> > > > hardware but the host doesn't understand or doesn't provide support
> > > > for. A guest may legimitately try to use such a feature as per the
> > > > architecture, but use of the feature may trap instead of working
> > > > normally, triggering undef injection into the guest.
> > > >
> > > > This is not a problem for the host, but the guest may go wrong when
> > > > running on newer hardware than the host knows about.
> > > >
> > > > This patch hides from guest VMs any AArch64-specific CPU features
> > > > that the host doesn't support, by exposing to the guest the
> > > > sanitised versions of the registers computed by the cpufeatures
> > > > framework, instead of the true hardware registers. To achieve
> > > > this, HCR_EL2.TID3 is now set for AArch64 guests, and emulation
> > > > code is added to KVM to report the sanitised versions of the
> > > > affected registers in response to MRS and register reads from
> > > > userspace.
> > > >
> > > > The affected registers are removed from invariant_sys_regs[] (since
> > > > the invariant_sys_regs handling is no longer quite correct for
> > > > them) and added to sys_reg_desgs[], with appropriate access(),
> > > > get_user() and set_user() methods. No runtime vcpu storage is
> > > > allocated for the registers: instead, they are read on demand from
> > > > the cpufeatures framework. This may need modification in the
> > > > future if there is a need for userspace to customise the features
> > > > visible to the guest.
> > > >
> > > > Attempts by userspace to write the registers are handled similarly
> > > > to the current invariant_sys_regs handling: writes are permitted,
> > > > but only if they don't attempt to change the value. This is
> > > > sufficient to support VM snapshot/restore from userspace.
> > > >
> > > > Because of the additional registers, restoring a VM on an older
> > > > kernel may not work unless userspace knows how to handle the extra
> > > > VM registers exposed to the KVM user ABI by this patch.
> > > >
> > > > Under the principle of least damage, this patch makes no attempt to
> > > > handle any of the other registers currently in
> > > > invariant_sys_regs[], or to emulate registers for AArch32: however,
> > > > these could be handled in a similar way in future, as necessary.
> > > >
> > > > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> > > > Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
> > > > Acked-by: Catalin Marinas <catalin.marinas@arm.com>
> > > > Cc: Christoffer Dall <christoffer.dall@linaro.org>
> > > > ---
> > > > arch/arm64/include/asm/sysreg.h | 3 +
> > > > arch/arm64/kvm/hyp/switch.c | 6 +
> > > > arch/arm64/kvm/sys_regs.c | 282 +++++++++++++++++++++++++++++++++-------
> > > > 3 files changed, 246 insertions(+), 45 deletions(-)
> > > >
> > > > diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
> > > > index 4dceb12..609d59af 100644
> > > > --- a/arch/arm64/include/asm/sysreg.h
> > > > +++ b/arch/arm64/include/asm/sysreg.h
> > > > @@ -149,6 +149,9 @@
> > > > #define SYS_ID_AA64DFR0_EL1 sys_reg(3, 0, 0, 5, 0)
> > > > #define SYS_ID_AA64DFR1_EL1 sys_reg(3, 0, 0, 5, 1)
> > > >
> > > > +#define SYS_ID_AA64AFR0_EL1 sys_reg(3, 0, 0, 5, 4)
> > > > +#define SYS_ID_AA64AFR1_EL1 sys_reg(3, 0, 0, 5, 5)
> > > > +
> > > > #define SYS_ID_AA64ISAR0_EL1 sys_reg(3, 0, 0, 6, 0)
> > > > #define SYS_ID_AA64ISAR1_EL1 sys_reg(3, 0, 0, 6, 1)
> > > >
> > > > diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
> > > > index 945e79c..35a90b8 100644
> > > > --- a/arch/arm64/kvm/hyp/switch.c
> > > > +++ b/arch/arm64/kvm/hyp/switch.c
> > > > @@ -81,11 +81,17 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu)
> > > > * it will cause an exception.
> > > > */
> > > > val = vcpu->arch.hcr_el2;
> > > > +
> > > > if (!(val & HCR_RW) && system_supports_fpsimd()) {
> > > > write_sysreg(1 << 30, fpexc32_el2);
> > > > isb();
> > > > }
> > > > +
> > > > + if (val & HCR_RW) /* for AArch64 only: */
> > > > + val |= HCR_TID3; /* TID3: trap feature register accesses */
> > > > +
> > >
> > > I still think we should set this in vcpu_reset_hcr() and do it once
> > > instead of adding code in every iteration of the critical path.
> >
> > Dang, I somehow missed this in the last round.
> >
> > How about:
> >
> > diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
> > index e5df3fc..c87be0d 100644
> > --- a/arch/arm64/include/asm/kvm_emulate.h
> > +++ b/arch/arm64/include/asm/kvm_emulate.h
> > @@ -49,6 +49,14 @@ static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu)
> > vcpu->arch.hcr_el2 |= HCR_E2H;
> > if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features))
> > vcpu->arch.hcr_el2 &= ~HCR_RW;
> > +
> > + /*
> > + * TID3: trap feature register accesses that we virtualise.
> > + * For now this is conditional, since no AArch32 feature regs
> > + * are currently virtualised.
> > + */
> > + if (vcpu->arch.hcr_el2 & HCR_RW)
> > + vcpu->arch.hcr_el2 |= HCR_TID3;
> > }
> >
> > static inline unsigned long vcpu_get_hcr(struct kvm_vcpu *vcpu)
> > >
> > > Otherwise this patch looks good to me.
> >
> > I'll probably post this as a separate follow-up patch, unless there's
> > some other reason for a full respin.
> >
>
> Fine with me, just remember to remove the part of the world-switch that
> was added in this patch, as that's what we want to savoid.
To be clear, does this amount to an Ack on the _original_ patch,
providing I follow up with this optimisation after the merge window?
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 04/30] arm64: KVM: Hide unsupported AArch64 CPU features from guests
@ 2017-11-02 11:01 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-11-02 11:01 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Nov 02, 2017 at 09:15:57AM +0100, Christoffer Dall wrote:
> On Wed, Nov 01, 2017 at 10:26:03AM +0000, Dave Martin wrote:
> > On Wed, Nov 01, 2017 at 05:47:29AM +0100, Christoffer Dall wrote:
> > > On Tue, Oct 31, 2017 at 03:50:56PM +0000, Dave Martin wrote:
> > > > Currently, a guest kernel sees the true CPU feature registers
> > > > (ID_*_EL1) when it reads them using MRS instructions. This means
> > > > that the guest may observe features that are present in the
> > > > hardware but the host doesn't understand or doesn't provide support
> > > > for. A guest may legimitately try to use such a feature as per the
> > > > architecture, but use of the feature may trap instead of working
> > > > normally, triggering undef injection into the guest.
> > > >
> > > > This is not a problem for the host, but the guest may go wrong when
> > > > running on newer hardware than the host knows about.
> > > >
> > > > This patch hides from guest VMs any AArch64-specific CPU features
> > > > that the host doesn't support, by exposing to the guest the
> > > > sanitised versions of the registers computed by the cpufeatures
> > > > framework, instead of the true hardware registers. To achieve
> > > > this, HCR_EL2.TID3 is now set for AArch64 guests, and emulation
> > > > code is added to KVM to report the sanitised versions of the
> > > > affected registers in response to MRS and register reads from
> > > > userspace.
> > > >
> > > > The affected registers are removed from invariant_sys_regs[] (since
> > > > the invariant_sys_regs handling is no longer quite correct for
> > > > them) and added to sys_reg_desgs[], with appropriate access(),
> > > > get_user() and set_user() methods. No runtime vcpu storage is
> > > > allocated for the registers: instead, they are read on demand from
> > > > the cpufeatures framework. This may need modification in the
> > > > future if there is a need for userspace to customise the features
> > > > visible to the guest.
> > > >
> > > > Attempts by userspace to write the registers are handled similarly
> > > > to the current invariant_sys_regs handling: writes are permitted,
> > > > but only if they don't attempt to change the value. This is
> > > > sufficient to support VM snapshot/restore from userspace.
> > > >
> > > > Because of the additional registers, restoring a VM on an older
> > > > kernel may not work unless userspace knows how to handle the extra
> > > > VM registers exposed to the KVM user ABI by this patch.
> > > >
> > > > Under the principle of least damage, this patch makes no attempt to
> > > > handle any of the other registers currently in
> > > > invariant_sys_regs[], or to emulate registers for AArch32: however,
> > > > these could be handled in a similar way in future, as necessary.
> > > >
> > > > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> > > > Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
> > > > Acked-by: Catalin Marinas <catalin.marinas@arm.com>
> > > > Cc: Christoffer Dall <christoffer.dall@linaro.org>
> > > > ---
> > > > arch/arm64/include/asm/sysreg.h | 3 +
> > > > arch/arm64/kvm/hyp/switch.c | 6 +
> > > > arch/arm64/kvm/sys_regs.c | 282 +++++++++++++++++++++++++++++++++-------
> > > > 3 files changed, 246 insertions(+), 45 deletions(-)
> > > >
> > > > diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
> > > > index 4dceb12..609d59af 100644
> > > > --- a/arch/arm64/include/asm/sysreg.h
> > > > +++ b/arch/arm64/include/asm/sysreg.h
> > > > @@ -149,6 +149,9 @@
> > > > #define SYS_ID_AA64DFR0_EL1 sys_reg(3, 0, 0, 5, 0)
> > > > #define SYS_ID_AA64DFR1_EL1 sys_reg(3, 0, 0, 5, 1)
> > > >
> > > > +#define SYS_ID_AA64AFR0_EL1 sys_reg(3, 0, 0, 5, 4)
> > > > +#define SYS_ID_AA64AFR1_EL1 sys_reg(3, 0, 0, 5, 5)
> > > > +
> > > > #define SYS_ID_AA64ISAR0_EL1 sys_reg(3, 0, 0, 6, 0)
> > > > #define SYS_ID_AA64ISAR1_EL1 sys_reg(3, 0, 0, 6, 1)
> > > >
> > > > diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
> > > > index 945e79c..35a90b8 100644
> > > > --- a/arch/arm64/kvm/hyp/switch.c
> > > > +++ b/arch/arm64/kvm/hyp/switch.c
> > > > @@ -81,11 +81,17 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu)
> > > > * it will cause an exception.
> > > > */
> > > > val = vcpu->arch.hcr_el2;
> > > > +
> > > > if (!(val & HCR_RW) && system_supports_fpsimd()) {
> > > > write_sysreg(1 << 30, fpexc32_el2);
> > > > isb();
> > > > }
> > > > +
> > > > + if (val & HCR_RW) /* for AArch64 only: */
> > > > + val |= HCR_TID3; /* TID3: trap feature register accesses */
> > > > +
> > >
> > > I still think we should set this in vcpu_reset_hcr() and do it once
> > > instead of adding code in every iteration of the critical path.
> >
> > Dang, I somehow missed this in the last round.
> >
> > How about:
> >
> > diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
> > index e5df3fc..c87be0d 100644
> > --- a/arch/arm64/include/asm/kvm_emulate.h
> > +++ b/arch/arm64/include/asm/kvm_emulate.h
> > @@ -49,6 +49,14 @@ static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu)
> > vcpu->arch.hcr_el2 |= HCR_E2H;
> > if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features))
> > vcpu->arch.hcr_el2 &= ~HCR_RW;
> > +
> > + /*
> > + * TID3: trap feature register accesses that we virtualise.
> > + * For now this is conditional, since no AArch32 feature regs
> > + * are currently virtualised.
> > + */
> > + if (vcpu->arch.hcr_el2 & HCR_RW)
> > + vcpu->arch.hcr_el2 |= HCR_TID3;
> > }
> >
> > static inline unsigned long vcpu_get_hcr(struct kvm_vcpu *vcpu)
> > >
> > > Otherwise this patch looks good to me.
> >
> > I'll probably post this as a separate follow-up patch, unless there's
> > some other reason for a full respin.
> >
>
> Fine with me, just remember to remove the part of the world-switch that
> was added in this patch, as that's what we want to savoid.
To be clear, does this amount to an Ack on the _original_ patch,
providing I follow up with this optimisation after the merge window?
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2017-11-02 16:32 ` Will Deacon
0 siblings, 0 replies; 174+ messages in thread
From: Will Deacon @ 2017-11-02 16:32 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Catalin Marinas, Ard Biesheuvel, Alex Bennée, Szabolcs Nagy,
Okamoto Takayuki, kvmarm-FPEHb7Xf0XXUo1n7N8X6UoWGPAHP3yOg,
libc-alpha-9JcytcrH/bA+uJoB2kUjGw,
linux-arch-u79uwXL29TY76Z2rM5mHXA, Alan Hayward, Alexander Viro,
Christoffer Dall, Mark Rutland, Oleg Nesterov, Dmitry Safonov,
H . J . Lu, H. Peter Anvin, Ingo Molnar, Thomas Gleixner,
Michael Kerrisk
On Tue, Oct 31, 2017 at 03:50:52PM +0000, Dave Martin wrote:
> This series implements Linux kernel support for the ARM Scalable Vector
> Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> and full cover letter.
>
> This is a minor update to v4, but does contain a couple of important
> fixes.
I've pushed a version of this series out to the arm64 devel branch, with
a view to putting it into next.
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git devel
Please kick the tyres and let me know of any issues ASAP.
Will
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2017-11-02 16:32 ` Will Deacon
0 siblings, 0 replies; 174+ messages in thread
From: Will Deacon @ 2017-11-02 16:32 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel, Catalin Marinas, Ard Biesheuvel,
Alex Bennée, Szabolcs Nagy, Okamoto Takayuki, kvmarm,
libc-alpha, linux-arch, Alan Hayward, Alexander Viro,
Christoffer Dall, Mark Rutland, Oleg Nesterov, Dmitry Safonov,
H . J . Lu, H. Peter Anvin, Ingo Molnar, Thomas Gleixner,
Michael Kerrisk, linux-api
On Tue, Oct 31, 2017 at 03:50:52PM +0000, Dave Martin wrote:
> This series implements Linux kernel support for the ARM Scalable Vector
> Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> and full cover letter.
>
> This is a minor update to v4, but does contain a couple of important
> fixes.
I've pushed a version of this series out to the arm64 devel branch, with
a view to putting it into next.
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git devel
Please kick the tyres and let me know of any issues ASAP.
Will
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2017-11-02 16:32 ` Will Deacon
0 siblings, 0 replies; 174+ messages in thread
From: Will Deacon @ 2017-11-02 16:32 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Oct 31, 2017 at 03:50:52PM +0000, Dave Martin wrote:
> This series implements Linux kernel support for the ARM Scalable Vector
> Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> and full cover letter.
>
> This is a minor update to v4, but does contain a couple of important
> fixes.
I've pushed a version of this series out to the arm64 devel branch, with
a view to putting it into next.
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git devel
Please kick the tyres and let me know of any issues ASAP.
Will
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2017-11-02 17:04 ` Dave P Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave P Martin @ 2017-11-02 17:04 UTC (permalink / raw)
To: Will Deacon
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Catalin Marinas, Ard Biesheuvel, Alex Bennée, Szabolcs Nagy,
tokamoto-+CUm20s59erQFUHtdCDX3A,
kvmarm-FPEHb7Xf0XXUo1n7N8X6UoWGPAHP3yOg,
libc-alpha-9JcytcrH/bA+uJoB2kUjGw,
linux-arch-u79uwXL29TY76Z2rM5mHXA, Alan Hayward, Alexander Viro,
Christoffer Dall, Mark Rutland, Oleg Nesterov, Dmitry Safonov,
H . J . Lu
On Thu, Nov 02, 2017 at 04:32:49PM +0000, Will Deacon wrote:
> On Tue, Oct 31, 2017 at 03:50:52PM +0000, Dave Martin wrote:
> > This series implements Linux kernel support for the ARM Scalable Vector
> > Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> > and full cover letter.
> >
> > This is a minor update to v4, but does contain a couple of important
> > fixes.
>
> I've pushed a version of this series out to the arm64 devel branch, with
> a view to putting it into next.
>
> git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git devel
>
> Please kick the tyres and let me know of any issues ASAP.
No obvious problems so far.
Cheers
---Dave
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2017-11-02 17:04 ` Dave P Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave P Martin @ 2017-11-02 17:04 UTC (permalink / raw)
To: Will Deacon
Cc: linux-arm-kernel, Catalin Marinas, Ard Biesheuvel,
Alex Bennée, Szabolcs Nagy, tokamoto, kvmarm, libc-alpha,
linux-arch, Alan Hayward, Alexander Viro, Christoffer Dall,
Mark Rutland, Oleg Nesterov, Dmitry Safonov, H . J . Lu,
H. Peter Anvin, Ingo Molnar, Thomas Gleixner, Michael Kerrisk,
linux-api
On Thu, Nov 02, 2017 at 04:32:49PM +0000, Will Deacon wrote:
> On Tue, Oct 31, 2017 at 03:50:52PM +0000, Dave Martin wrote:
> > This series implements Linux kernel support for the ARM Scalable Vector
> > Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> > and full cover letter.
> >
> > This is a minor update to v4, but does contain a couple of important
> > fixes.
>
> I've pushed a version of this series out to the arm64 devel branch, with
> a view to putting it into next.
>
> git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git devel
>
> Please kick the tyres and let me know of any issues ASAP.
No obvious problems so far.
Cheers
---Dave
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2017-11-02 17:04 ` Dave P Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave P Martin @ 2017-11-02 17:04 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Nov 02, 2017 at 04:32:49PM +0000, Will Deacon wrote:
> On Tue, Oct 31, 2017 at 03:50:52PM +0000, Dave Martin wrote:
> > This series implements Linux kernel support for the ARM Scalable Vector
> > Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> > and full cover letter.
> >
> > This is a minor update to v4, but does contain a couple of important
> > fixes.
>
> I've pushed a version of this series out to the arm64 devel branch, with
> a view to putting it into next.
>
> git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git devel
>
> Please kick the tyres and let me know of any issues ASAP.
No obvious problems so far.
Cheers
---Dave
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 04/30] arm64: KVM: Hide unsupported AArch64 CPU features from guests
2017-11-02 11:01 ` Dave Martin
@ 2017-11-02 19:18 ` Christoffer Dall
-1 siblings, 0 replies; 174+ messages in thread
From: Christoffer Dall @ 2017-11-02 19:18 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arch, Okamoto Takayuki, libc-alpha, Ard Biesheuvel,
Szabolcs Nagy, Catalin Marinas, Will Deacon, linux-arm-kernel,
Alex Bennée, kvmarm, Christoffer Dall
On Thu, Nov 02, 2017 at 11:01:37AM +0000, Dave Martin wrote:
> On Thu, Nov 02, 2017 at 09:15:57AM +0100, Christoffer Dall wrote:
> > On Wed, Nov 01, 2017 at 10:26:03AM +0000, Dave Martin wrote:
> > > On Wed, Nov 01, 2017 at 05:47:29AM +0100, Christoffer Dall wrote:
> > > > On Tue, Oct 31, 2017 at 03:50:56PM +0000, Dave Martin wrote:
> > > > > Currently, a guest kernel sees the true CPU feature registers
> > > > > (ID_*_EL1) when it reads them using MRS instructions. This means
> > > > > that the guest may observe features that are present in the
> > > > > hardware but the host doesn't understand or doesn't provide support
> > > > > for. A guest may legimitately try to use such a feature as per the
> > > > > architecture, but use of the feature may trap instead of working
> > > > > normally, triggering undef injection into the guest.
> > > > >
> > > > > This is not a problem for the host, but the guest may go wrong when
> > > > > running on newer hardware than the host knows about.
> > > > >
> > > > > This patch hides from guest VMs any AArch64-specific CPU features
> > > > > that the host doesn't support, by exposing to the guest the
> > > > > sanitised versions of the registers computed by the cpufeatures
> > > > > framework, instead of the true hardware registers. To achieve
> > > > > this, HCR_EL2.TID3 is now set for AArch64 guests, and emulation
> > > > > code is added to KVM to report the sanitised versions of the
> > > > > affected registers in response to MRS and register reads from
> > > > > userspace.
> > > > >
> > > > > The affected registers are removed from invariant_sys_regs[] (since
> > > > > the invariant_sys_regs handling is no longer quite correct for
> > > > > them) and added to sys_reg_desgs[], with appropriate access(),
> > > > > get_user() and set_user() methods. No runtime vcpu storage is
> > > > > allocated for the registers: instead, they are read on demand from
> > > > > the cpufeatures framework. This may need modification in the
> > > > > future if there is a need for userspace to customise the features
> > > > > visible to the guest.
> > > > >
> > > > > Attempts by userspace to write the registers are handled similarly
> > > > > to the current invariant_sys_regs handling: writes are permitted,
> > > > > but only if they don't attempt to change the value. This is
> > > > > sufficient to support VM snapshot/restore from userspace.
> > > > >
> > > > > Because of the additional registers, restoring a VM on an older
> > > > > kernel may not work unless userspace knows how to handle the extra
> > > > > VM registers exposed to the KVM user ABI by this patch.
> > > > >
> > > > > Under the principle of least damage, this patch makes no attempt to
> > > > > handle any of the other registers currently in
> > > > > invariant_sys_regs[], or to emulate registers for AArch32: however,
> > > > > these could be handled in a similar way in future, as necessary.
> > > > >
> > > > > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> > > > > Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
> > > > > Acked-by: Catalin Marinas <catalin.marinas@arm.com>
> > > > > Cc: Christoffer Dall <christoffer.dall@linaro.org>
> > > > > ---
> > > > > arch/arm64/include/asm/sysreg.h | 3 +
> > > > > arch/arm64/kvm/hyp/switch.c | 6 +
> > > > > arch/arm64/kvm/sys_regs.c | 282 +++++++++++++++++++++++++++++++++-------
> > > > > 3 files changed, 246 insertions(+), 45 deletions(-)
> > > > >
> > > > > diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
> > > > > index 4dceb12..609d59af 100644
> > > > > --- a/arch/arm64/include/asm/sysreg.h
> > > > > +++ b/arch/arm64/include/asm/sysreg.h
> > > > > @@ -149,6 +149,9 @@
> > > > > #define SYS_ID_AA64DFR0_EL1 sys_reg(3, 0, 0, 5, 0)
> > > > > #define SYS_ID_AA64DFR1_EL1 sys_reg(3, 0, 0, 5, 1)
> > > > >
> > > > > +#define SYS_ID_AA64AFR0_EL1 sys_reg(3, 0, 0, 5, 4)
> > > > > +#define SYS_ID_AA64AFR1_EL1 sys_reg(3, 0, 0, 5, 5)
> > > > > +
> > > > > #define SYS_ID_AA64ISAR0_EL1 sys_reg(3, 0, 0, 6, 0)
> > > > > #define SYS_ID_AA64ISAR1_EL1 sys_reg(3, 0, 0, 6, 1)
> > > > >
> > > > > diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
> > > > > index 945e79c..35a90b8 100644
> > > > > --- a/arch/arm64/kvm/hyp/switch.c
> > > > > +++ b/arch/arm64/kvm/hyp/switch.c
> > > > > @@ -81,11 +81,17 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu)
> > > > > * it will cause an exception.
> > > > > */
> > > > > val = vcpu->arch.hcr_el2;
> > > > > +
> > > > > if (!(val & HCR_RW) && system_supports_fpsimd()) {
> > > > > write_sysreg(1 << 30, fpexc32_el2);
> > > > > isb();
> > > > > }
> > > > > +
> > > > > + if (val & HCR_RW) /* for AArch64 only: */
> > > > > + val |= HCR_TID3; /* TID3: trap feature register accesses */
> > > > > +
> > > >
> > > > I still think we should set this in vcpu_reset_hcr() and do it once
> > > > instead of adding code in every iteration of the critical path.
> > >
> > > Dang, I somehow missed this in the last round.
> > >
> > > How about:
> > >
> > > diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
> > > index e5df3fc..c87be0d 100644
> > > --- a/arch/arm64/include/asm/kvm_emulate.h
> > > +++ b/arch/arm64/include/asm/kvm_emulate.h
> > > @@ -49,6 +49,14 @@ static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu)
> > > vcpu->arch.hcr_el2 |= HCR_E2H;
> > > if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features))
> > > vcpu->arch.hcr_el2 &= ~HCR_RW;
> > > +
> > > + /*
> > > + * TID3: trap feature register accesses that we virtualise.
> > > + * For now this is conditional, since no AArch32 feature regs
> > > + * are currently virtualised.
> > > + */
> > > + if (vcpu->arch.hcr_el2 & HCR_RW)
> > > + vcpu->arch.hcr_el2 |= HCR_TID3;
> > > }
> > >
> > > static inline unsigned long vcpu_get_hcr(struct kvm_vcpu *vcpu)
> > > >
> > > > Otherwise this patch looks good to me.
> > >
> > > I'll probably post this as a separate follow-up patch, unless there's
> > > some other reason for a full respin.
> > >
> >
> > Fine with me, just remember to remove the part of the world-switch that
> > was added in this patch, as that's what we want to savoid.
>
> To be clear, does this amount to an Ack on the _original_ patch,
> providing I follow up with this optimisation after the merge window?
>
Yes:
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 04/30] arm64: KVM: Hide unsupported AArch64 CPU features from guests
@ 2017-11-02 19:18 ` Christoffer Dall
0 siblings, 0 replies; 174+ messages in thread
From: Christoffer Dall @ 2017-11-02 19:18 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Nov 02, 2017 at 11:01:37AM +0000, Dave Martin wrote:
> On Thu, Nov 02, 2017 at 09:15:57AM +0100, Christoffer Dall wrote:
> > On Wed, Nov 01, 2017 at 10:26:03AM +0000, Dave Martin wrote:
> > > On Wed, Nov 01, 2017 at 05:47:29AM +0100, Christoffer Dall wrote:
> > > > On Tue, Oct 31, 2017 at 03:50:56PM +0000, Dave Martin wrote:
> > > > > Currently, a guest kernel sees the true CPU feature registers
> > > > > (ID_*_EL1) when it reads them using MRS instructions. This means
> > > > > that the guest may observe features that are present in the
> > > > > hardware but the host doesn't understand or doesn't provide support
> > > > > for. A guest may legimitately try to use such a feature as per the
> > > > > architecture, but use of the feature may trap instead of working
> > > > > normally, triggering undef injection into the guest.
> > > > >
> > > > > This is not a problem for the host, but the guest may go wrong when
> > > > > running on newer hardware than the host knows about.
> > > > >
> > > > > This patch hides from guest VMs any AArch64-specific CPU features
> > > > > that the host doesn't support, by exposing to the guest the
> > > > > sanitised versions of the registers computed by the cpufeatures
> > > > > framework, instead of the true hardware registers. To achieve
> > > > > this, HCR_EL2.TID3 is now set for AArch64 guests, and emulation
> > > > > code is added to KVM to report the sanitised versions of the
> > > > > affected registers in response to MRS and register reads from
> > > > > userspace.
> > > > >
> > > > > The affected registers are removed from invariant_sys_regs[] (since
> > > > > the invariant_sys_regs handling is no longer quite correct for
> > > > > them) and added to sys_reg_desgs[], with appropriate access(),
> > > > > get_user() and set_user() methods. No runtime vcpu storage is
> > > > > allocated for the registers: instead, they are read on demand from
> > > > > the cpufeatures framework. This may need modification in the
> > > > > future if there is a need for userspace to customise the features
> > > > > visible to the guest.
> > > > >
> > > > > Attempts by userspace to write the registers are handled similarly
> > > > > to the current invariant_sys_regs handling: writes are permitted,
> > > > > but only if they don't attempt to change the value. This is
> > > > > sufficient to support VM snapshot/restore from userspace.
> > > > >
> > > > > Because of the additional registers, restoring a VM on an older
> > > > > kernel may not work unless userspace knows how to handle the extra
> > > > > VM registers exposed to the KVM user ABI by this patch.
> > > > >
> > > > > Under the principle of least damage, this patch makes no attempt to
> > > > > handle any of the other registers currently in
> > > > > invariant_sys_regs[], or to emulate registers for AArch32: however,
> > > > > these could be handled in a similar way in future, as necessary.
> > > > >
> > > > > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> > > > > Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
> > > > > Acked-by: Catalin Marinas <catalin.marinas@arm.com>
> > > > > Cc: Christoffer Dall <christoffer.dall@linaro.org>
> > > > > ---
> > > > > arch/arm64/include/asm/sysreg.h | 3 +
> > > > > arch/arm64/kvm/hyp/switch.c | 6 +
> > > > > arch/arm64/kvm/sys_regs.c | 282 +++++++++++++++++++++++++++++++++-------
> > > > > 3 files changed, 246 insertions(+), 45 deletions(-)
> > > > >
> > > > > diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
> > > > > index 4dceb12..609d59af 100644
> > > > > --- a/arch/arm64/include/asm/sysreg.h
> > > > > +++ b/arch/arm64/include/asm/sysreg.h
> > > > > @@ -149,6 +149,9 @@
> > > > > #define SYS_ID_AA64DFR0_EL1 sys_reg(3, 0, 0, 5, 0)
> > > > > #define SYS_ID_AA64DFR1_EL1 sys_reg(3, 0, 0, 5, 1)
> > > > >
> > > > > +#define SYS_ID_AA64AFR0_EL1 sys_reg(3, 0, 0, 5, 4)
> > > > > +#define SYS_ID_AA64AFR1_EL1 sys_reg(3, 0, 0, 5, 5)
> > > > > +
> > > > > #define SYS_ID_AA64ISAR0_EL1 sys_reg(3, 0, 0, 6, 0)
> > > > > #define SYS_ID_AA64ISAR1_EL1 sys_reg(3, 0, 0, 6, 1)
> > > > >
> > > > > diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
> > > > > index 945e79c..35a90b8 100644
> > > > > --- a/arch/arm64/kvm/hyp/switch.c
> > > > > +++ b/arch/arm64/kvm/hyp/switch.c
> > > > > @@ -81,11 +81,17 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu)
> > > > > * it will cause an exception.
> > > > > */
> > > > > val = vcpu->arch.hcr_el2;
> > > > > +
> > > > > if (!(val & HCR_RW) && system_supports_fpsimd()) {
> > > > > write_sysreg(1 << 30, fpexc32_el2);
> > > > > isb();
> > > > > }
> > > > > +
> > > > > + if (val & HCR_RW) /* for AArch64 only: */
> > > > > + val |= HCR_TID3; /* TID3: trap feature register accesses */
> > > > > +
> > > >
> > > > I still think we should set this in vcpu_reset_hcr() and do it once
> > > > instead of adding code in every iteration of the critical path.
> > >
> > > Dang, I somehow missed this in the last round.
> > >
> > > How about:
> > >
> > > diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
> > > index e5df3fc..c87be0d 100644
> > > --- a/arch/arm64/include/asm/kvm_emulate.h
> > > +++ b/arch/arm64/include/asm/kvm_emulate.h
> > > @@ -49,6 +49,14 @@ static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu)
> > > vcpu->arch.hcr_el2 |= HCR_E2H;
> > > if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features))
> > > vcpu->arch.hcr_el2 &= ~HCR_RW;
> > > +
> > > + /*
> > > + * TID3: trap feature register accesses that we virtualise.
> > > + * For now this is conditional, since no AArch32 feature regs
> > > + * are currently virtualised.
> > > + */
> > > + if (vcpu->arch.hcr_el2 & HCR_RW)
> > > + vcpu->arch.hcr_el2 |= HCR_TID3;
> > > }
> > >
> > > static inline unsigned long vcpu_get_hcr(struct kvm_vcpu *vcpu)
> > > >
> > > > Otherwise this patch looks good to me.
> > >
> > > I'll probably post this as a separate follow-up patch, unless there's
> > > some other reason for a full respin.
> > >
> >
> > Fine with me, just remember to remove the part of the world-switch that
> > was added in this patch, as that's what we want to savoid.
>
> To be clear, does this amount to an Ack on the _original_ patch,
> providing I follow up with this optimisation after the merge window?
>
Yes:
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 15/30] arm64/sve: Signal handling support
@ 2017-11-07 13:22 ` Alex Bennée
0 siblings, 0 replies; 174+ messages in thread
From: Alex Bennée @ 2017-11-07 13:22 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel, Catalin Marinas, Will Deacon, Ard Biesheuvel,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
Dave Martin <Dave.Martin@arm.com> writes:
> This patch implements support for saving and restoring the SVE
> registers around signals.
>
> A fixed-size header struct sve_context is always included in the
> signal frame encoding the thread's vector length at the time of
> signal delivery, optionally followed by a variable-layout structure
> encoding the SVE registers.
>
> Because of the need to preserve backwards compatibility, the FPSIMD
> view of the SVE registers is always dumped as a struct
> fpsimd_context in the usual way, in addition to any sve_context.
>
> The SVE vector registers are dumped in full, including bits 127:0
> of each register which alias the corresponding FPSIMD vector
> registers in the hardware. To avoid any ambiguity about which
> alias to restore during sigreturn, the kernel always restores bits
> 127:0 of each SVE vector register from the fpsimd_context in the
> signal frame (which must be present): userspace needs to take this
> into account if it wants to modify the SVE vector register contents
> on return from a signal.
>
> FPSR and FPCR, which are used by both FPSIMD and SVE, are not
> included in sve_context because they are always present in
> fpsimd_context anyway.
>
> For signal delivery, a new helper
> fpsimd_signal_preserve_current_state() is added to update _both_
> the FPSIMD and SVE views in the task struct, to make it easier to
> populate this information into the signal frame. Because of the
> redundancy between the two views of the state, only one is updated
> otherwise.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Cc: Alex Bennée <alex.bennee@linaro.org>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Cc: Will Deacon <will.deacon@arm.com>
After adding SVE support for RISU I was able to confirm consistent
signal delivery with a decent context over multiple runs and after
hacking echo "32" > /proc/sys/abi/sve_default_vector_length to change
the default length the tests would fail (as expected).
Tested-by: Alex Bennée <alex.bennee@linaro.org>
>
> ---
>
> **Dropped** Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> (Non-trivial changes.)
>
> Changes since v4
> ----------------
>
> Requested by Will Deacon:
>
> * Fix inconsistent return semantics in restore_sve_fpsimd_context().
>
> Currently a nonzero return value from __copy_from_user() is passed
> back as-is to the caller or restore_sve_fpsimd_context(), rather than
> translating it do an error code as is done elsewhere.
>
> Callers of restore_sve_fpsimd_context() only care whether the return
> value is 0 or not, so this isn't a big deal, but it is more
> consistent to return proper error codes on failure in case we grow a
> use for them later.
>
> This patch returns -EFAULT in the __copy_from_user() error cases
> that weren't explicitly handled.
>
> Miscellaneous:
>
> * Change inconsistent copy_to_user() calls to __copy_to_user() in
> preserve_sve_context().
>
> There are already __put_user_error() calls here.
>
> The whole extended signal frame is already checked for
> access_ok(VERIFY_WRITE) in get_sigframe().
> ---
> arch/arm64/include/asm/fpsimd.h | 1 +
> arch/arm64/kernel/fpsimd.c | 55 ++++++++++---
> arch/arm64/kernel/signal.c | 167 ++++++++++++++++++++++++++++++++++++++--
> arch/arm64/kernel/signal32.c | 2 +-
> 4 files changed, 206 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
> index 5655fe1..9bbd74c 100644
> --- a/arch/arm64/include/asm/fpsimd.h
> +++ b/arch/arm64/include/asm/fpsimd.h
> @@ -63,6 +63,7 @@ extern void fpsimd_load_state(struct fpsimd_state *state);
> extern void fpsimd_thread_switch(struct task_struct *next);
> extern void fpsimd_flush_thread(void);
>
> +extern void fpsimd_signal_preserve_current_state(void);
> extern void fpsimd_preserve_current_state(void);
> extern void fpsimd_restore_current_state(void);
> extern void fpsimd_update_current_state(struct fpsimd_state *state);
> diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
> index c91be8e..e0b5ef5 100644
> --- a/arch/arm64/kernel/fpsimd.c
> +++ b/arch/arm64/kernel/fpsimd.c
> @@ -299,6 +299,32 @@ static void fpsimd_to_sve(struct task_struct *task)
> sizeof(fst->vregs[i]));
> }
>
> +/*
> + * Transfer the SVE state in task->thread.sve_state to
> + * task->thread.fpsimd_state.
> + *
> + * Task can be a non-runnable task, or current. In the latter case,
> + * softirqs (and preemption) must be disabled.
> + * task->thread.sve_state must point to at least sve_state_size(task)
> + * bytes of allocated kernel memory.
> + * task->thread.sve_state must be up to date before calling this function.
> + */
> +static void sve_to_fpsimd(struct task_struct *task)
> +{
> + unsigned int vq;
> + void const *sst = task->thread.sve_state;
> + struct fpsimd_state *fst = &task->thread.fpsimd_state;
> + unsigned int i;
> +
> + if (!system_supports_sve())
> + return;
> +
> + vq = sve_vq_from_vl(task->thread.sve_vl);
> + for (i = 0; i < 32; ++i)
> + memcpy(&fst->vregs[i], ZREG(sst, vq, i),
> + sizeof(fst->vregs[i]));
> +}
> +
> #ifdef CONFIG_ARM64_SVE
>
> /*
> @@ -500,9 +526,6 @@ void fpsimd_flush_thread(void)
> /*
> * Save the userland FPSIMD state of 'current' to memory, but only if the state
> * currently held in the registers does in fact belong to 'current'
> - *
> - * Currently, SVE tasks can't exist, so just WARN in that case.
> - * Subsequent patches will add full SVE support here.
> */
> void fpsimd_preserve_current_state(void)
> {
> @@ -510,16 +533,23 @@ void fpsimd_preserve_current_state(void)
> return;
>
> local_bh_disable();
> -
> - if (!test_thread_flag(TIF_FOREIGN_FPSTATE))
> - fpsimd_save_state(¤t->thread.fpsimd_state);
> -
> - WARN_ON_ONCE(test_and_clear_thread_flag(TIF_SVE));
> -
> + task_fpsimd_save();
> local_bh_enable();
> }
>
> /*
> + * Like fpsimd_preserve_current_state(), but ensure that
> + * current->thread.fpsimd_state is updated so that it can be copied to
> + * the signal frame.
> + */
> +void fpsimd_signal_preserve_current_state(void)
> +{
> + fpsimd_preserve_current_state();
> + if (system_supports_sve() && test_thread_flag(TIF_SVE))
> + sve_to_fpsimd(current);
> +}
> +
> +/*
> * Load the userland FPSIMD state of 'current' from memory, but only if the
> * FPSIMD state already held in the registers is /not/ the most recent FPSIMD
> * state of 'current'
> @@ -554,7 +584,12 @@ void fpsimd_update_current_state(struct fpsimd_state *state)
>
> local_bh_disable();
>
> - fpsimd_load_state(state);
> + if (system_supports_sve() && test_thread_flag(TIF_SVE)) {
> + current->thread.fpsimd_state = *state;
> + fpsimd_to_sve(current);
> + }
> + task_fpsimd_load();
> +
> if (test_and_clear_thread_flag(TIF_FOREIGN_FPSTATE)) {
> struct fpsimd_state *st = ¤t->thread.fpsimd_state;
>
> diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
> index 4716729..64abf88 100644
> --- a/arch/arm64/kernel/signal.c
> +++ b/arch/arm64/kernel/signal.c
> @@ -63,6 +63,7 @@ struct rt_sigframe_user_layout {
>
> unsigned long fpsimd_offset;
> unsigned long esr_offset;
> + unsigned long sve_offset;
> unsigned long extra_offset;
> unsigned long end_offset;
> };
> @@ -179,9 +180,6 @@ static int preserve_fpsimd_context(struct fpsimd_context __user *ctx)
> struct fpsimd_state *fpsimd = ¤t->thread.fpsimd_state;
> int err;
>
> - /* dump the hardware registers to the fpsimd_state structure */
> - fpsimd_preserve_current_state();
> -
> /* copy the FP and status/control registers */
> err = __copy_to_user(ctx->vregs, fpsimd->vregs, sizeof(fpsimd->vregs));
> __put_user_error(fpsimd->fpsr, &ctx->fpsr, err);
> @@ -214,6 +212,8 @@ static int restore_fpsimd_context(struct fpsimd_context __user *ctx)
> __get_user_error(fpsimd.fpsr, &ctx->fpsr, err);
> __get_user_error(fpsimd.fpcr, &ctx->fpcr, err);
>
> + clear_thread_flag(TIF_SVE);
> +
> /* load the hardware registers from the fpsimd_state structure */
> if (!err)
> fpsimd_update_current_state(&fpsimd);
> @@ -221,10 +221,118 @@ static int restore_fpsimd_context(struct fpsimd_context __user *ctx)
> return err ? -EFAULT : 0;
> }
>
> +
> struct user_ctxs {
> struct fpsimd_context __user *fpsimd;
> + struct sve_context __user *sve;
> };
>
> +#ifdef CONFIG_ARM64_SVE
> +
> +static int preserve_sve_context(struct sve_context __user *ctx)
> +{
> + int err = 0;
> + u16 reserved[ARRAY_SIZE(ctx->__reserved)];
> + unsigned int vl = current->thread.sve_vl;
> + unsigned int vq = 0;
> +
> + if (test_thread_flag(TIF_SVE))
> + vq = sve_vq_from_vl(vl);
> +
> + memset(reserved, 0, sizeof(reserved));
> +
> + __put_user_error(SVE_MAGIC, &ctx->head.magic, err);
> + __put_user_error(round_up(SVE_SIG_CONTEXT_SIZE(vq), 16),
> + &ctx->head.size, err);
> + __put_user_error(vl, &ctx->vl, err);
> + BUILD_BUG_ON(sizeof(ctx->__reserved) != sizeof(reserved));
> + err |= __copy_to_user(&ctx->__reserved, reserved, sizeof(reserved));
> +
> + if (vq) {
> + /*
> + * This assumes that the SVE state has already been saved to
> + * the task struct by calling preserve_fpsimd_context().
> + */
> + err |= __copy_to_user((char __user *)ctx + SVE_SIG_REGS_OFFSET,
> + current->thread.sve_state,
> + SVE_SIG_REGS_SIZE(vq));
> + }
> +
> + return err ? -EFAULT : 0;
> +}
> +
> +static int restore_sve_fpsimd_context(struct user_ctxs *user)
> +{
> + int err;
> + unsigned int vq;
> + struct fpsimd_state fpsimd;
> + struct sve_context sve;
> +
> + if (__copy_from_user(&sve, user->sve, sizeof(sve)))
> + return -EFAULT;
> +
> + if (sve.vl != current->thread.sve_vl)
> + return -EINVAL;
> +
> + if (sve.head.size <= sizeof(*user->sve)) {
> + clear_thread_flag(TIF_SVE);
> + goto fpsimd_only;
> + }
> +
> + vq = sve_vq_from_vl(sve.vl);
> +
> + if (sve.head.size < SVE_SIG_CONTEXT_SIZE(vq))
> + return -EINVAL;
> +
> + /*
> + * Careful: we are about __copy_from_user() directly into
> + * thread.sve_state with preemption enabled, so protection is
> + * needed to prevent a racing context switch from writing stale
> + * registers back over the new data.
> + */
> +
> + fpsimd_flush_task_state(current);
> + barrier();
> + /* From now, fpsimd_thread_switch() won't clear TIF_FOREIGN_FPSTATE */
> +
> + set_thread_flag(TIF_FOREIGN_FPSTATE);
> + barrier();
> + /* From now, fpsimd_thread_switch() won't touch thread.sve_state */
> +
> + sve_alloc(current);
> + err = __copy_from_user(current->thread.sve_state,
> + (char __user const *)user->sve +
> + SVE_SIG_REGS_OFFSET,
> + SVE_SIG_REGS_SIZE(vq));
> + if (err)
> + return -EFAULT;
> +
> + set_thread_flag(TIF_SVE);
> +
> +fpsimd_only:
> + /* copy the FP and status/control registers */
> + /* restore_sigframe() already checked that user->fpsimd != NULL. */
> + err = __copy_from_user(fpsimd.vregs, user->fpsimd->vregs,
> + sizeof(fpsimd.vregs));
> + __get_user_error(fpsimd.fpsr, &user->fpsimd->fpsr, err);
> + __get_user_error(fpsimd.fpcr, &user->fpsimd->fpcr, err);
> +
> + /* load the hardware registers from the fpsimd_state structure */
> + if (!err)
> + fpsimd_update_current_state(&fpsimd);
> +
> + return err ? -EFAULT : 0;
> +}
> +
> +#else /* ! CONFIG_ARM64_SVE */
> +
> +/* Turn any non-optimised out attempts to use these into a link error: */
> +extern int preserve_sve_context(void __user *ctx);
> +extern int restore_sve_fpsimd_context(struct user_ctxs *user);
> +
> +#endif /* ! CONFIG_ARM64_SVE */
> +
> +
> static int parse_user_sigframe(struct user_ctxs *user,
> struct rt_sigframe __user *sf)
> {
> @@ -237,6 +345,7 @@ static int parse_user_sigframe(struct user_ctxs *user,
> char const __user *const sfp = (char const __user *)sf;
>
> user->fpsimd = NULL;
> + user->sve = NULL;
>
> if (!IS_ALIGNED((unsigned long)base, 16))
> goto invalid;
> @@ -287,6 +396,19 @@ static int parse_user_sigframe(struct user_ctxs *user,
> /* ignore */
> break;
>
> + case SVE_MAGIC:
> + if (!system_supports_sve())
> + goto invalid;
> +
> + if (user->sve)
> + goto invalid;
> +
> + if (size < sizeof(*user->sve))
> + goto invalid;
> +
> + user->sve = (struct sve_context __user *)head;
> + break;
> +
> case EXTRA_MAGIC:
> if (have_extra_context)
> goto invalid;
> @@ -363,9 +485,6 @@ static int parse_user_sigframe(struct user_ctxs *user,
> }
>
> done:
> - if (!user->fpsimd)
> - goto invalid;
> -
> return 0;
>
> invalid:
> @@ -399,8 +518,19 @@ static int restore_sigframe(struct pt_regs *regs,
> if (err == 0)
> err = parse_user_sigframe(&user, sf);
>
> - if (err == 0)
> - err = restore_fpsimd_context(user.fpsimd);
> + if (err == 0) {
> + if (!user.fpsimd)
> + return -EINVAL;
> +
> + if (user.sve) {
> + if (!system_supports_sve())
> + return -EINVAL;
> +
> + err = restore_sve_fpsimd_context(&user);
> + } else {
> + err = restore_fpsimd_context(user.fpsimd);
> + }
> + }
>
> return err;
> }
> @@ -459,6 +589,18 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user)
> return err;
> }
>
> + if (system_supports_sve()) {
> + unsigned int vq = 0;
> +
> + if (test_thread_flag(TIF_SVE))
> + vq = sve_vq_from_vl(current->thread.sve_vl);
> +
> + err = sigframe_alloc(user, &user->sve_offset,
> + SVE_SIG_CONTEXT_SIZE(vq));
> + if (err)
> + return err;
> + }
> +
> return sigframe_alloc_end(user);
> }
>
> @@ -500,6 +642,13 @@ static int setup_sigframe(struct rt_sigframe_user_layout *user,
> __put_user_error(current->thread.fault_code, &esr_ctx->esr, err);
> }
>
> + /* Scalable Vector Extension state, if present */
> + if (system_supports_sve() && err == 0 && user->sve_offset) {
> + struct sve_context __user *sve_ctx =
> + apply_user_offset(user, user->sve_offset);
> + err |= preserve_sve_context(sve_ctx);
> + }
> +
> if (err == 0 && user->extra_offset) {
> char __user *sfp = (char __user *)user->sigframe;
> char __user *userp =
> @@ -599,6 +748,8 @@ static int setup_rt_frame(int usig, struct ksignal *ksig, sigset_t *set,
> struct rt_sigframe __user *frame;
> int err = 0;
>
> + fpsimd_signal_preserve_current_state();
> +
> if (get_sigframe(&user, ksig, regs))
> return 1;
>
> diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c
> index e09bf5d..22711ee 100644
> --- a/arch/arm64/kernel/signal32.c
> +++ b/arch/arm64/kernel/signal32.c
> @@ -239,7 +239,7 @@ static int compat_preserve_vfp_context(struct compat_vfp_sigframe __user *frame)
> * Note that this also saves V16-31, which aren't visible
> * in AArch32.
> */
> - fpsimd_preserve_current_state();
> + fpsimd_signal_preserve_current_state();
>
> /* Place structure header on the stack */
> __put_user_error(magic, &frame->magic, err);
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 15/30] arm64/sve: Signal handling support
@ 2017-11-07 13:22 ` Alex Bennée
0 siblings, 0 replies; 174+ messages in thread
From: Alex Bennée @ 2017-11-07 13:22 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel, Catalin Marinas, Will Deacon, Ard Biesheuvel,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
Dave Martin <Dave.Martin@arm.com> writes:
> This patch implements support for saving and restoring the SVE
> registers around signals.
>
> A fixed-size header struct sve_context is always included in the
> signal frame encoding the thread's vector length at the time of
> signal delivery, optionally followed by a variable-layout structure
> encoding the SVE registers.
>
> Because of the need to preserve backwards compatibility, the FPSIMD
> view of the SVE registers is always dumped as a struct
> fpsimd_context in the usual way, in addition to any sve_context.
>
> The SVE vector registers are dumped in full, including bits 127:0
> of each register which alias the corresponding FPSIMD vector
> registers in the hardware. To avoid any ambiguity about which
> alias to restore during sigreturn, the kernel always restores bits
> 127:0 of each SVE vector register from the fpsimd_context in the
> signal frame (which must be present): userspace needs to take this
> into account if it wants to modify the SVE vector register contents
> on return from a signal.
>
> FPSR and FPCR, which are used by both FPSIMD and SVE, are not
> included in sve_context because they are always present in
> fpsimd_context anyway.
>
> For signal delivery, a new helper
> fpsimd_signal_preserve_current_state() is added to update _both_
> the FPSIMD and SVE views in the task struct, to make it easier to
> populate this information into the signal frame. Because of the
> redundancy between the two views of the state, only one is updated
> otherwise.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Cc: Alex Bennée <alex.bennee@linaro.org>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Cc: Will Deacon <will.deacon@arm.com>
After adding SVE support for RISU I was able to confirm consistent
signal delivery with a decent context over multiple runs and after
hacking echo "32" > /proc/sys/abi/sve_default_vector_length to change
the default length the tests would fail (as expected).
Tested-by: Alex Bennée <alex.bennee@linaro.org>
>
> ---
>
> **Dropped** Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> (Non-trivial changes.)
>
> Changes since v4
> ----------------
>
> Requested by Will Deacon:
>
> * Fix inconsistent return semantics in restore_sve_fpsimd_context().
>
> Currently a nonzero return value from __copy_from_user() is passed
> back as-is to the caller or restore_sve_fpsimd_context(), rather than
> translating it do an error code as is done elsewhere.
>
> Callers of restore_sve_fpsimd_context() only care whether the return
> value is 0 or not, so this isn't a big deal, but it is more
> consistent to return proper error codes on failure in case we grow a
> use for them later.
>
> This patch returns -EFAULT in the __copy_from_user() error cases
> that weren't explicitly handled.
>
> Miscellaneous:
>
> * Change inconsistent copy_to_user() calls to __copy_to_user() in
> preserve_sve_context().
>
> There are already __put_user_error() calls here.
>
> The whole extended signal frame is already checked for
> access_ok(VERIFY_WRITE) in get_sigframe().
> ---
> arch/arm64/include/asm/fpsimd.h | 1 +
> arch/arm64/kernel/fpsimd.c | 55 ++++++++++---
> arch/arm64/kernel/signal.c | 167 ++++++++++++++++++++++++++++++++++++++--
> arch/arm64/kernel/signal32.c | 2 +-
> 4 files changed, 206 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
> index 5655fe1..9bbd74c 100644
> --- a/arch/arm64/include/asm/fpsimd.h
> +++ b/arch/arm64/include/asm/fpsimd.h
> @@ -63,6 +63,7 @@ extern void fpsimd_load_state(struct fpsimd_state *state);
> extern void fpsimd_thread_switch(struct task_struct *next);
> extern void fpsimd_flush_thread(void);
>
> +extern void fpsimd_signal_preserve_current_state(void);
> extern void fpsimd_preserve_current_state(void);
> extern void fpsimd_restore_current_state(void);
> extern void fpsimd_update_current_state(struct fpsimd_state *state);
> diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
> index c91be8e..e0b5ef5 100644
> --- a/arch/arm64/kernel/fpsimd.c
> +++ b/arch/arm64/kernel/fpsimd.c
> @@ -299,6 +299,32 @@ static void fpsimd_to_sve(struct task_struct *task)
> sizeof(fst->vregs[i]));
> }
>
> +/*
> + * Transfer the SVE state in task->thread.sve_state to
> + * task->thread.fpsimd_state.
> + *
> + * Task can be a non-runnable task, or current. In the latter case,
> + * softirqs (and preemption) must be disabled.
> + * task->thread.sve_state must point to at least sve_state_size(task)
> + * bytes of allocated kernel memory.
> + * task->thread.sve_state must be up to date before calling this function.
> + */
> +static void sve_to_fpsimd(struct task_struct *task)
> +{
> + unsigned int vq;
> + void const *sst = task->thread.sve_state;
> + struct fpsimd_state *fst = &task->thread.fpsimd_state;
> + unsigned int i;
> +
> + if (!system_supports_sve())
> + return;
> +
> + vq = sve_vq_from_vl(task->thread.sve_vl);
> + for (i = 0; i < 32; ++i)
> + memcpy(&fst->vregs[i], ZREG(sst, vq, i),
> + sizeof(fst->vregs[i]));
> +}
> +
> #ifdef CONFIG_ARM64_SVE
>
> /*
> @@ -500,9 +526,6 @@ void fpsimd_flush_thread(void)
> /*
> * Save the userland FPSIMD state of 'current' to memory, but only if the state
> * currently held in the registers does in fact belong to 'current'
> - *
> - * Currently, SVE tasks can't exist, so just WARN in that case.
> - * Subsequent patches will add full SVE support here.
> */
> void fpsimd_preserve_current_state(void)
> {
> @@ -510,16 +533,23 @@ void fpsimd_preserve_current_state(void)
> return;
>
> local_bh_disable();
> -
> - if (!test_thread_flag(TIF_FOREIGN_FPSTATE))
> - fpsimd_save_state(¤t->thread.fpsimd_state);
> -
> - WARN_ON_ONCE(test_and_clear_thread_flag(TIF_SVE));
> -
> + task_fpsimd_save();
> local_bh_enable();
> }
>
> /*
> + * Like fpsimd_preserve_current_state(), but ensure that
> + * current->thread.fpsimd_state is updated so that it can be copied to
> + * the signal frame.
> + */
> +void fpsimd_signal_preserve_current_state(void)
> +{
> + fpsimd_preserve_current_state();
> + if (system_supports_sve() && test_thread_flag(TIF_SVE))
> + sve_to_fpsimd(current);
> +}
> +
> +/*
> * Load the userland FPSIMD state of 'current' from memory, but only if the
> * FPSIMD state already held in the registers is /not/ the most recent FPSIMD
> * state of 'current'
> @@ -554,7 +584,12 @@ void fpsimd_update_current_state(struct fpsimd_state *state)
>
> local_bh_disable();
>
> - fpsimd_load_state(state);
> + if (system_supports_sve() && test_thread_flag(TIF_SVE)) {
> + current->thread.fpsimd_state = *state;
> + fpsimd_to_sve(current);
> + }
> + task_fpsimd_load();
> +
> if (test_and_clear_thread_flag(TIF_FOREIGN_FPSTATE)) {
> struct fpsimd_state *st = ¤t->thread.fpsimd_state;
>
> diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
> index 4716729..64abf88 100644
> --- a/arch/arm64/kernel/signal.c
> +++ b/arch/arm64/kernel/signal.c
> @@ -63,6 +63,7 @@ struct rt_sigframe_user_layout {
>
> unsigned long fpsimd_offset;
> unsigned long esr_offset;
> + unsigned long sve_offset;
> unsigned long extra_offset;
> unsigned long end_offset;
> };
> @@ -179,9 +180,6 @@ static int preserve_fpsimd_context(struct fpsimd_context __user *ctx)
> struct fpsimd_state *fpsimd = ¤t->thread.fpsimd_state;
> int err;
>
> - /* dump the hardware registers to the fpsimd_state structure */
> - fpsimd_preserve_current_state();
> -
> /* copy the FP and status/control registers */
> err = __copy_to_user(ctx->vregs, fpsimd->vregs, sizeof(fpsimd->vregs));
> __put_user_error(fpsimd->fpsr, &ctx->fpsr, err);
> @@ -214,6 +212,8 @@ static int restore_fpsimd_context(struct fpsimd_context __user *ctx)
> __get_user_error(fpsimd.fpsr, &ctx->fpsr, err);
> __get_user_error(fpsimd.fpcr, &ctx->fpcr, err);
>
> + clear_thread_flag(TIF_SVE);
> +
> /* load the hardware registers from the fpsimd_state structure */
> if (!err)
> fpsimd_update_current_state(&fpsimd);
> @@ -221,10 +221,118 @@ static int restore_fpsimd_context(struct fpsimd_context __user *ctx)
> return err ? -EFAULT : 0;
> }
>
> +
> struct user_ctxs {
> struct fpsimd_context __user *fpsimd;
> + struct sve_context __user *sve;
> };
>
> +#ifdef CONFIG_ARM64_SVE
> +
> +static int preserve_sve_context(struct sve_context __user *ctx)
> +{
> + int err = 0;
> + u16 reserved[ARRAY_SIZE(ctx->__reserved)];
> + unsigned int vl = current->thread.sve_vl;
> + unsigned int vq = 0;
> +
> + if (test_thread_flag(TIF_SVE))
> + vq = sve_vq_from_vl(vl);
> +
> + memset(reserved, 0, sizeof(reserved));
> +
> + __put_user_error(SVE_MAGIC, &ctx->head.magic, err);
> + __put_user_error(round_up(SVE_SIG_CONTEXT_SIZE(vq), 16),
> + &ctx->head.size, err);
> + __put_user_error(vl, &ctx->vl, err);
> + BUILD_BUG_ON(sizeof(ctx->__reserved) != sizeof(reserved));
> + err |= __copy_to_user(&ctx->__reserved, reserved, sizeof(reserved));
> +
> + if (vq) {
> + /*
> + * This assumes that the SVE state has already been saved to
> + * the task struct by calling preserve_fpsimd_context().
> + */
> + err |= __copy_to_user((char __user *)ctx + SVE_SIG_REGS_OFFSET,
> + current->thread.sve_state,
> + SVE_SIG_REGS_SIZE(vq));
> + }
> +
> + return err ? -EFAULT : 0;
> +}
> +
> +static int restore_sve_fpsimd_context(struct user_ctxs *user)
> +{
> + int err;
> + unsigned int vq;
> + struct fpsimd_state fpsimd;
> + struct sve_context sve;
> +
> + if (__copy_from_user(&sve, user->sve, sizeof(sve)))
> + return -EFAULT;
> +
> + if (sve.vl != current->thread.sve_vl)
> + return -EINVAL;
> +
> + if (sve.head.size <= sizeof(*user->sve)) {
> + clear_thread_flag(TIF_SVE);
> + goto fpsimd_only;
> + }
> +
> + vq = sve_vq_from_vl(sve.vl);
> +
> + if (sve.head.size < SVE_SIG_CONTEXT_SIZE(vq))
> + return -EINVAL;
> +
> + /*
> + * Careful: we are about __copy_from_user() directly into
> + * thread.sve_state with preemption enabled, so protection is
> + * needed to prevent a racing context switch from writing stale
> + * registers back over the new data.
> + */
> +
> + fpsimd_flush_task_state(current);
> + barrier();
> + /* From now, fpsimd_thread_switch() won't clear TIF_FOREIGN_FPSTATE */
> +
> + set_thread_flag(TIF_FOREIGN_FPSTATE);
> + barrier();
> + /* From now, fpsimd_thread_switch() won't touch thread.sve_state */
> +
> + sve_alloc(current);
> + err = __copy_from_user(current->thread.sve_state,
> + (char __user const *)user->sve +
> + SVE_SIG_REGS_OFFSET,
> + SVE_SIG_REGS_SIZE(vq));
> + if (err)
> + return -EFAULT;
> +
> + set_thread_flag(TIF_SVE);
> +
> +fpsimd_only:
> + /* copy the FP and status/control registers */
> + /* restore_sigframe() already checked that user->fpsimd != NULL. */
> + err = __copy_from_user(fpsimd.vregs, user->fpsimd->vregs,
> + sizeof(fpsimd.vregs));
> + __get_user_error(fpsimd.fpsr, &user->fpsimd->fpsr, err);
> + __get_user_error(fpsimd.fpcr, &user->fpsimd->fpcr, err);
> +
> + /* load the hardware registers from the fpsimd_state structure */
> + if (!err)
> + fpsimd_update_current_state(&fpsimd);
> +
> + return err ? -EFAULT : 0;
> +}
> +
> +#else /* ! CONFIG_ARM64_SVE */
> +
> +/* Turn any non-optimised out attempts to use these into a link error: */
> +extern int preserve_sve_context(void __user *ctx);
> +extern int restore_sve_fpsimd_context(struct user_ctxs *user);
> +
> +#endif /* ! CONFIG_ARM64_SVE */
> +
> +
> static int parse_user_sigframe(struct user_ctxs *user,
> struct rt_sigframe __user *sf)
> {
> @@ -237,6 +345,7 @@ static int parse_user_sigframe(struct user_ctxs *user,
> char const __user *const sfp = (char const __user *)sf;
>
> user->fpsimd = NULL;
> + user->sve = NULL;
>
> if (!IS_ALIGNED((unsigned long)base, 16))
> goto invalid;
> @@ -287,6 +396,19 @@ static int parse_user_sigframe(struct user_ctxs *user,
> /* ignore */
> break;
>
> + case SVE_MAGIC:
> + if (!system_supports_sve())
> + goto invalid;
> +
> + if (user->sve)
> + goto invalid;
> +
> + if (size < sizeof(*user->sve))
> + goto invalid;
> +
> + user->sve = (struct sve_context __user *)head;
> + break;
> +
> case EXTRA_MAGIC:
> if (have_extra_context)
> goto invalid;
> @@ -363,9 +485,6 @@ static int parse_user_sigframe(struct user_ctxs *user,
> }
>
> done:
> - if (!user->fpsimd)
> - goto invalid;
> -
> return 0;
>
> invalid:
> @@ -399,8 +518,19 @@ static int restore_sigframe(struct pt_regs *regs,
> if (err == 0)
> err = parse_user_sigframe(&user, sf);
>
> - if (err == 0)
> - err = restore_fpsimd_context(user.fpsimd);
> + if (err == 0) {
> + if (!user.fpsimd)
> + return -EINVAL;
> +
> + if (user.sve) {
> + if (!system_supports_sve())
> + return -EINVAL;
> +
> + err = restore_sve_fpsimd_context(&user);
> + } else {
> + err = restore_fpsimd_context(user.fpsimd);
> + }
> + }
>
> return err;
> }
> @@ -459,6 +589,18 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user)
> return err;
> }
>
> + if (system_supports_sve()) {
> + unsigned int vq = 0;
> +
> + if (test_thread_flag(TIF_SVE))
> + vq = sve_vq_from_vl(current->thread.sve_vl);
> +
> + err = sigframe_alloc(user, &user->sve_offset,
> + SVE_SIG_CONTEXT_SIZE(vq));
> + if (err)
> + return err;
> + }
> +
> return sigframe_alloc_end(user);
> }
>
> @@ -500,6 +642,13 @@ static int setup_sigframe(struct rt_sigframe_user_layout *user,
> __put_user_error(current->thread.fault_code, &esr_ctx->esr, err);
> }
>
> + /* Scalable Vector Extension state, if present */
> + if (system_supports_sve() && err == 0 && user->sve_offset) {
> + struct sve_context __user *sve_ctx =
> + apply_user_offset(user, user->sve_offset);
> + err |= preserve_sve_context(sve_ctx);
> + }
> +
> if (err == 0 && user->extra_offset) {
> char __user *sfp = (char __user *)user->sigframe;
> char __user *userp =
> @@ -599,6 +748,8 @@ static int setup_rt_frame(int usig, struct ksignal *ksig, sigset_t *set,
> struct rt_sigframe __user *frame;
> int err = 0;
>
> + fpsimd_signal_preserve_current_state();
> +
> if (get_sigframe(&user, ksig, regs))
> return 1;
>
> diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c
> index e09bf5d..22711ee 100644
> --- a/arch/arm64/kernel/signal32.c
> +++ b/arch/arm64/kernel/signal32.c
> @@ -239,7 +239,7 @@ static int compat_preserve_vfp_context(struct compat_vfp_sigframe __user *frame)
> * Note that this also saves V16-31, which aren't visible
> * in AArch32.
> */
> - fpsimd_preserve_current_state();
> + fpsimd_signal_preserve_current_state();
>
> /* Place structure header on the stack */
> __put_user_error(magic, &frame->magic, err);
--
Alex Bennée
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 15/30] arm64/sve: Signal handling support
@ 2017-11-07 13:22 ` Alex Bennée
0 siblings, 0 replies; 174+ messages in thread
From: Alex Bennée @ 2017-11-07 13:22 UTC (permalink / raw)
To: linux-arm-kernel
Dave Martin <Dave.Martin@arm.com> writes:
> This patch implements support for saving and restoring the SVE
> registers around signals.
>
> A fixed-size header struct sve_context is always included in the
> signal frame encoding the thread's vector length at the time of
> signal delivery, optionally followed by a variable-layout structure
> encoding the SVE registers.
>
> Because of the need to preserve backwards compatibility, the FPSIMD
> view of the SVE registers is always dumped as a struct
> fpsimd_context in the usual way, in addition to any sve_context.
>
> The SVE vector registers are dumped in full, including bits 127:0
> of each register which alias the corresponding FPSIMD vector
> registers in the hardware. To avoid any ambiguity about which
> alias to restore during sigreturn, the kernel always restores bits
> 127:0 of each SVE vector register from the fpsimd_context in the
> signal frame (which must be present): userspace needs to take this
> into account if it wants to modify the SVE vector register contents
> on return from a signal.
>
> FPSR and FPCR, which are used by both FPSIMD and SVE, are not
> included in sve_context because they are always present in
> fpsimd_context anyway.
>
> For signal delivery, a new helper
> fpsimd_signal_preserve_current_state() is added to update _both_
> the FPSIMD and SVE views in the task struct, to make it easier to
> populate this information into the signal frame. Because of the
> redundancy between the two views of the state, only one is updated
> otherwise.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Cc: Alex Benn?e <alex.bennee@linaro.org>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Cc: Will Deacon <will.deacon@arm.com>
After adding SVE support for RISU I was able to confirm consistent
signal delivery with a decent context over multiple runs and after
hacking echo "32" > /proc/sys/abi/sve_default_vector_length to change
the default length the tests would fail (as expected).
Tested-by: Alex Benn?e <alex.bennee@linaro.org>
>
> ---
>
> **Dropped** Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> (Non-trivial changes.)
>
> Changes since v4
> ----------------
>
> Requested by Will Deacon:
>
> * Fix inconsistent return semantics in restore_sve_fpsimd_context().
>
> Currently a nonzero return value from __copy_from_user() is passed
> back as-is to the caller or restore_sve_fpsimd_context(), rather than
> translating it do an error code as is done elsewhere.
>
> Callers of restore_sve_fpsimd_context() only care whether the return
> value is 0 or not, so this isn't a big deal, but it is more
> consistent to return proper error codes on failure in case we grow a
> use for them later.
>
> This patch returns -EFAULT in the __copy_from_user() error cases
> that weren't explicitly handled.
>
> Miscellaneous:
>
> * Change inconsistent copy_to_user() calls to __copy_to_user() in
> preserve_sve_context().
>
> There are already __put_user_error() calls here.
>
> The whole extended signal frame is already checked for
> access_ok(VERIFY_WRITE) in get_sigframe().
> ---
> arch/arm64/include/asm/fpsimd.h | 1 +
> arch/arm64/kernel/fpsimd.c | 55 ++++++++++---
> arch/arm64/kernel/signal.c | 167 ++++++++++++++++++++++++++++++++++++++--
> arch/arm64/kernel/signal32.c | 2 +-
> 4 files changed, 206 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
> index 5655fe1..9bbd74c 100644
> --- a/arch/arm64/include/asm/fpsimd.h
> +++ b/arch/arm64/include/asm/fpsimd.h
> @@ -63,6 +63,7 @@ extern void fpsimd_load_state(struct fpsimd_state *state);
> extern void fpsimd_thread_switch(struct task_struct *next);
> extern void fpsimd_flush_thread(void);
>
> +extern void fpsimd_signal_preserve_current_state(void);
> extern void fpsimd_preserve_current_state(void);
> extern void fpsimd_restore_current_state(void);
> extern void fpsimd_update_current_state(struct fpsimd_state *state);
> diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
> index c91be8e..e0b5ef5 100644
> --- a/arch/arm64/kernel/fpsimd.c
> +++ b/arch/arm64/kernel/fpsimd.c
> @@ -299,6 +299,32 @@ static void fpsimd_to_sve(struct task_struct *task)
> sizeof(fst->vregs[i]));
> }
>
> +/*
> + * Transfer the SVE state in task->thread.sve_state to
> + * task->thread.fpsimd_state.
> + *
> + * Task can be a non-runnable task, or current. In the latter case,
> + * softirqs (and preemption) must be disabled.
> + * task->thread.sve_state must point to at least sve_state_size(task)
> + * bytes of allocated kernel memory.
> + * task->thread.sve_state must be up to date before calling this function.
> + */
> +static void sve_to_fpsimd(struct task_struct *task)
> +{
> + unsigned int vq;
> + void const *sst = task->thread.sve_state;
> + struct fpsimd_state *fst = &task->thread.fpsimd_state;
> + unsigned int i;
> +
> + if (!system_supports_sve())
> + return;
> +
> + vq = sve_vq_from_vl(task->thread.sve_vl);
> + for (i = 0; i < 32; ++i)
> + memcpy(&fst->vregs[i], ZREG(sst, vq, i),
> + sizeof(fst->vregs[i]));
> +}
> +
> #ifdef CONFIG_ARM64_SVE
>
> /*
> @@ -500,9 +526,6 @@ void fpsimd_flush_thread(void)
> /*
> * Save the userland FPSIMD state of 'current' to memory, but only if the state
> * currently held in the registers does in fact belong to 'current'
> - *
> - * Currently, SVE tasks can't exist, so just WARN in that case.
> - * Subsequent patches will add full SVE support here.
> */
> void fpsimd_preserve_current_state(void)
> {
> @@ -510,16 +533,23 @@ void fpsimd_preserve_current_state(void)
> return;
>
> local_bh_disable();
> -
> - if (!test_thread_flag(TIF_FOREIGN_FPSTATE))
> - fpsimd_save_state(¤t->thread.fpsimd_state);
> -
> - WARN_ON_ONCE(test_and_clear_thread_flag(TIF_SVE));
> -
> + task_fpsimd_save();
> local_bh_enable();
> }
>
> /*
> + * Like fpsimd_preserve_current_state(), but ensure that
> + * current->thread.fpsimd_state is updated so that it can be copied to
> + * the signal frame.
> + */
> +void fpsimd_signal_preserve_current_state(void)
> +{
> + fpsimd_preserve_current_state();
> + if (system_supports_sve() && test_thread_flag(TIF_SVE))
> + sve_to_fpsimd(current);
> +}
> +
> +/*
> * Load the userland FPSIMD state of 'current' from memory, but only if the
> * FPSIMD state already held in the registers is /not/ the most recent FPSIMD
> * state of 'current'
> @@ -554,7 +584,12 @@ void fpsimd_update_current_state(struct fpsimd_state *state)
>
> local_bh_disable();
>
> - fpsimd_load_state(state);
> + if (system_supports_sve() && test_thread_flag(TIF_SVE)) {
> + current->thread.fpsimd_state = *state;
> + fpsimd_to_sve(current);
> + }
> + task_fpsimd_load();
> +
> if (test_and_clear_thread_flag(TIF_FOREIGN_FPSTATE)) {
> struct fpsimd_state *st = ¤t->thread.fpsimd_state;
>
> diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
> index 4716729..64abf88 100644
> --- a/arch/arm64/kernel/signal.c
> +++ b/arch/arm64/kernel/signal.c
> @@ -63,6 +63,7 @@ struct rt_sigframe_user_layout {
>
> unsigned long fpsimd_offset;
> unsigned long esr_offset;
> + unsigned long sve_offset;
> unsigned long extra_offset;
> unsigned long end_offset;
> };
> @@ -179,9 +180,6 @@ static int preserve_fpsimd_context(struct fpsimd_context __user *ctx)
> struct fpsimd_state *fpsimd = ¤t->thread.fpsimd_state;
> int err;
>
> - /* dump the hardware registers to the fpsimd_state structure */
> - fpsimd_preserve_current_state();
> -
> /* copy the FP and status/control registers */
> err = __copy_to_user(ctx->vregs, fpsimd->vregs, sizeof(fpsimd->vregs));
> __put_user_error(fpsimd->fpsr, &ctx->fpsr, err);
> @@ -214,6 +212,8 @@ static int restore_fpsimd_context(struct fpsimd_context __user *ctx)
> __get_user_error(fpsimd.fpsr, &ctx->fpsr, err);
> __get_user_error(fpsimd.fpcr, &ctx->fpcr, err);
>
> + clear_thread_flag(TIF_SVE);
> +
> /* load the hardware registers from the fpsimd_state structure */
> if (!err)
> fpsimd_update_current_state(&fpsimd);
> @@ -221,10 +221,118 @@ static int restore_fpsimd_context(struct fpsimd_context __user *ctx)
> return err ? -EFAULT : 0;
> }
>
> +
> struct user_ctxs {
> struct fpsimd_context __user *fpsimd;
> + struct sve_context __user *sve;
> };
>
> +#ifdef CONFIG_ARM64_SVE
> +
> +static int preserve_sve_context(struct sve_context __user *ctx)
> +{
> + int err = 0;
> + u16 reserved[ARRAY_SIZE(ctx->__reserved)];
> + unsigned int vl = current->thread.sve_vl;
> + unsigned int vq = 0;
> +
> + if (test_thread_flag(TIF_SVE))
> + vq = sve_vq_from_vl(vl);
> +
> + memset(reserved, 0, sizeof(reserved));
> +
> + __put_user_error(SVE_MAGIC, &ctx->head.magic, err);
> + __put_user_error(round_up(SVE_SIG_CONTEXT_SIZE(vq), 16),
> + &ctx->head.size, err);
> + __put_user_error(vl, &ctx->vl, err);
> + BUILD_BUG_ON(sizeof(ctx->__reserved) != sizeof(reserved));
> + err |= __copy_to_user(&ctx->__reserved, reserved, sizeof(reserved));
> +
> + if (vq) {
> + /*
> + * This assumes that the SVE state has already been saved to
> + * the task struct by calling preserve_fpsimd_context().
> + */
> + err |= __copy_to_user((char __user *)ctx + SVE_SIG_REGS_OFFSET,
> + current->thread.sve_state,
> + SVE_SIG_REGS_SIZE(vq));
> + }
> +
> + return err ? -EFAULT : 0;
> +}
> +
> +static int restore_sve_fpsimd_context(struct user_ctxs *user)
> +{
> + int err;
> + unsigned int vq;
> + struct fpsimd_state fpsimd;
> + struct sve_context sve;
> +
> + if (__copy_from_user(&sve, user->sve, sizeof(sve)))
> + return -EFAULT;
> +
> + if (sve.vl != current->thread.sve_vl)
> + return -EINVAL;
> +
> + if (sve.head.size <= sizeof(*user->sve)) {
> + clear_thread_flag(TIF_SVE);
> + goto fpsimd_only;
> + }
> +
> + vq = sve_vq_from_vl(sve.vl);
> +
> + if (sve.head.size < SVE_SIG_CONTEXT_SIZE(vq))
> + return -EINVAL;
> +
> + /*
> + * Careful: we are about __copy_from_user() directly into
> + * thread.sve_state with preemption enabled, so protection is
> + * needed to prevent a racing context switch from writing stale
> + * registers back over the new data.
> + */
> +
> + fpsimd_flush_task_state(current);
> + barrier();
> + /* From now, fpsimd_thread_switch() won't clear TIF_FOREIGN_FPSTATE */
> +
> + set_thread_flag(TIF_FOREIGN_FPSTATE);
> + barrier();
> + /* From now, fpsimd_thread_switch() won't touch thread.sve_state */
> +
> + sve_alloc(current);
> + err = __copy_from_user(current->thread.sve_state,
> + (char __user const *)user->sve +
> + SVE_SIG_REGS_OFFSET,
> + SVE_SIG_REGS_SIZE(vq));
> + if (err)
> + return -EFAULT;
> +
> + set_thread_flag(TIF_SVE);
> +
> +fpsimd_only:
> + /* copy the FP and status/control registers */
> + /* restore_sigframe() already checked that user->fpsimd != NULL. */
> + err = __copy_from_user(fpsimd.vregs, user->fpsimd->vregs,
> + sizeof(fpsimd.vregs));
> + __get_user_error(fpsimd.fpsr, &user->fpsimd->fpsr, err);
> + __get_user_error(fpsimd.fpcr, &user->fpsimd->fpcr, err);
> +
> + /* load the hardware registers from the fpsimd_state structure */
> + if (!err)
> + fpsimd_update_current_state(&fpsimd);
> +
> + return err ? -EFAULT : 0;
> +}
> +
> +#else /* ! CONFIG_ARM64_SVE */
> +
> +/* Turn any non-optimised out attempts to use these into a link error: */
> +extern int preserve_sve_context(void __user *ctx);
> +extern int restore_sve_fpsimd_context(struct user_ctxs *user);
> +
> +#endif /* ! CONFIG_ARM64_SVE */
> +
> +
> static int parse_user_sigframe(struct user_ctxs *user,
> struct rt_sigframe __user *sf)
> {
> @@ -237,6 +345,7 @@ static int parse_user_sigframe(struct user_ctxs *user,
> char const __user *const sfp = (char const __user *)sf;
>
> user->fpsimd = NULL;
> + user->sve = NULL;
>
> if (!IS_ALIGNED((unsigned long)base, 16))
> goto invalid;
> @@ -287,6 +396,19 @@ static int parse_user_sigframe(struct user_ctxs *user,
> /* ignore */
> break;
>
> + case SVE_MAGIC:
> + if (!system_supports_sve())
> + goto invalid;
> +
> + if (user->sve)
> + goto invalid;
> +
> + if (size < sizeof(*user->sve))
> + goto invalid;
> +
> + user->sve = (struct sve_context __user *)head;
> + break;
> +
> case EXTRA_MAGIC:
> if (have_extra_context)
> goto invalid;
> @@ -363,9 +485,6 @@ static int parse_user_sigframe(struct user_ctxs *user,
> }
>
> done:
> - if (!user->fpsimd)
> - goto invalid;
> -
> return 0;
>
> invalid:
> @@ -399,8 +518,19 @@ static int restore_sigframe(struct pt_regs *regs,
> if (err == 0)
> err = parse_user_sigframe(&user, sf);
>
> - if (err == 0)
> - err = restore_fpsimd_context(user.fpsimd);
> + if (err == 0) {
> + if (!user.fpsimd)
> + return -EINVAL;
> +
> + if (user.sve) {
> + if (!system_supports_sve())
> + return -EINVAL;
> +
> + err = restore_sve_fpsimd_context(&user);
> + } else {
> + err = restore_fpsimd_context(user.fpsimd);
> + }
> + }
>
> return err;
> }
> @@ -459,6 +589,18 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user)
> return err;
> }
>
> + if (system_supports_sve()) {
> + unsigned int vq = 0;
> +
> + if (test_thread_flag(TIF_SVE))
> + vq = sve_vq_from_vl(current->thread.sve_vl);
> +
> + err = sigframe_alloc(user, &user->sve_offset,
> + SVE_SIG_CONTEXT_SIZE(vq));
> + if (err)
> + return err;
> + }
> +
> return sigframe_alloc_end(user);
> }
>
> @@ -500,6 +642,13 @@ static int setup_sigframe(struct rt_sigframe_user_layout *user,
> __put_user_error(current->thread.fault_code, &esr_ctx->esr, err);
> }
>
> + /* Scalable Vector Extension state, if present */
> + if (system_supports_sve() && err == 0 && user->sve_offset) {
> + struct sve_context __user *sve_ctx =
> + apply_user_offset(user, user->sve_offset);
> + err |= preserve_sve_context(sve_ctx);
> + }
> +
> if (err == 0 && user->extra_offset) {
> char __user *sfp = (char __user *)user->sigframe;
> char __user *userp =
> @@ -599,6 +748,8 @@ static int setup_rt_frame(int usig, struct ksignal *ksig, sigset_t *set,
> struct rt_sigframe __user *frame;
> int err = 0;
>
> + fpsimd_signal_preserve_current_state();
> +
> if (get_sigframe(&user, ksig, regs))
> return 1;
>
> diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c
> index e09bf5d..22711ee 100644
> --- a/arch/arm64/kernel/signal32.c
> +++ b/arch/arm64/kernel/signal32.c
> @@ -239,7 +239,7 @@ static int compat_preserve_vfp_context(struct compat_vfp_sigframe __user *frame)
> * Note that this also saves V16-31, which aren't visible
> * in AArch32.
> */
> - fpsimd_preserve_current_state();
> + fpsimd_signal_preserve_current_state();
>
> /* Place structure header on the stack */
> __put_user_error(magic, &frame->magic, err);
--
Alex Benn?e
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 01/30] regset: Add support for dynamically sized regsets
@ 2017-11-08 11:50 ` Alex Bennée
0 siblings, 0 replies; 174+ messages in thread
From: Alex Bennée @ 2017-11-08 11:50 UTC (permalink / raw)
To: Dave Martin
Cc: Catalin Marinas, linux-arch, H. J. Lu, Okamoto Takayuki,
libc-alpha, Ard Biesheuvel, Szabolcs Nagy, Dmitry Safonov,
Will Deacon, Oleg Nesterov, Ingo Molnar, Alexander Viro,
H. Peter Anvin, Thomas Gleixner, kvmarm, linux-arm-kernel
Dave Martin <Dave.Martin@arm.com> writes:
> On Wed, Nov 01, 2017 at 11:42:29AM +0000, Catalin Marinas wrote:
>> On Tue, Oct 31, 2017 at 03:50:53PM +0000, Dave P Martin wrote:
>> > Currently the regset API doesn't allow for the possibility that
>> > regsets (or at least, the amount of meaningful data in a regset)
>> > may change in size.
>> >
>> > In particular, this results in useless padding being added to
>> > coredumps if a regset's current size is smaller than its
>> > theoretical maximum size.
>> >
>> > This patch adds a get_size() function to struct user_regset.
>> > Individual regset implementations can implement this function to
>> > return the current size of the regset data. A regset_size()
>> > function is added to provide callers with an abstract interface for
>> > determining the size of a regset without needing to know whether
>> > the regset is dynamically sized or not.
>> >
>> > The only affected user of this interface is the ELF coredump code:
>> > This patch ports ELF coredump to dump regsets with their actual
>> > size in the coredump. This has no effect except for new regsets
>> > that are dynamically sized and provide a get_size() implementation.
>> >
>> > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
>> > Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
>> > Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
>> > Cc: Oleg Nesterov <oleg@redhat.com>
>> > Cc: Alexander Viro <viro@zeniv.linux.org.uk>
>> > Cc: Thomas Gleixner <tglx@linutronix.de>
>> > Cc: Ingo Molnar <mingo@redhat.com>
>> > Cc: "H. Peter Anvin" <hpa@zytor.com>
>> > Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
>> > Cc: H. J. Lu <hjl.tools@gmail.com>
>> >
>> > ---
>> >
>> > **Dropped** Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
>> > **Dropped** Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
>> > (due to bug fix applied against v4 of this patch.)
>>
>> It seems that the Reviewed-by tags are still there ;). Anyway, on the
>
> Oops, looks like that only happened on this patch. I've removed
> Alex's R-b from my own version in case of repost -- can you also
> do the same?
>
>> new patch:
>>
>> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
You can have my:
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
>
> Cheers
> ---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 01/30] regset: Add support for dynamically sized regsets
@ 2017-11-08 11:50 ` Alex Bennée
0 siblings, 0 replies; 174+ messages in thread
From: Alex Bennée @ 2017-11-08 11:50 UTC (permalink / raw)
To: Dave Martin
Cc: Catalin Marinas, linux-arch, H. J. Lu, Okamoto Takayuki,
libc-alpha, Ard Biesheuvel, Szabolcs Nagy, Dmitry Safonov,
Will Deacon, Oleg Nesterov, Ingo Molnar, Alexander Viro,
H. Peter Anvin, Thomas Gleixner, kvmarm, linux-arm-kernel
Dave Martin <Dave.Martin@arm.com> writes:
> On Wed, Nov 01, 2017 at 11:42:29AM +0000, Catalin Marinas wrote:
>> On Tue, Oct 31, 2017 at 03:50:53PM +0000, Dave P Martin wrote:
>> > Currently the regset API doesn't allow for the possibility that
>> > regsets (or at least, the amount of meaningful data in a regset)
>> > may change in size.
>> >
>> > In particular, this results in useless padding being added to
>> > coredumps if a regset's current size is smaller than its
>> > theoretical maximum size.
>> >
>> > This patch adds a get_size() function to struct user_regset.
>> > Individual regset implementations can implement this function to
>> > return the current size of the regset data. A regset_size()
>> > function is added to provide callers with an abstract interface for
>> > determining the size of a regset without needing to know whether
>> > the regset is dynamically sized or not.
>> >
>> > The only affected user of this interface is the ELF coredump code:
>> > This patch ports ELF coredump to dump regsets with their actual
>> > size in the coredump. This has no effect except for new regsets
>> > that are dynamically sized and provide a get_size() implementation.
>> >
>> > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
>> > Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
>> > Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
>> > Cc: Oleg Nesterov <oleg@redhat.com>
>> > Cc: Alexander Viro <viro@zeniv.linux.org.uk>
>> > Cc: Thomas Gleixner <tglx@linutronix.de>
>> > Cc: Ingo Molnar <mingo@redhat.com>
>> > Cc: "H. Peter Anvin" <hpa@zytor.com>
>> > Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
>> > Cc: H. J. Lu <hjl.tools@gmail.com>
>> >
>> > ---
>> >
>> > **Dropped** Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
>> > **Dropped** Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
>> > (due to bug fix applied against v4 of this patch.)
>>
>> It seems that the Reviewed-by tags are still there ;). Anyway, on the
>
> Oops, looks like that only happened on this patch. I've removed
> Alex's R-b from my own version in case of repost -- can you also
> do the same?
>
>> new patch:
>>
>> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
You can have my:
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
>
> Cheers
> ---Dave
--
Alex Bennée
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 01/30] regset: Add support for dynamically sized regsets
@ 2017-11-08 11:50 ` Alex Bennée
0 siblings, 0 replies; 174+ messages in thread
From: Alex Bennée @ 2017-11-08 11:50 UTC (permalink / raw)
To: linux-arm-kernel
Dave Martin <Dave.Martin@arm.com> writes:
> On Wed, Nov 01, 2017 at 11:42:29AM +0000, Catalin Marinas wrote:
>> On Tue, Oct 31, 2017 at 03:50:53PM +0000, Dave P Martin wrote:
>> > Currently the regset API doesn't allow for the possibility that
>> > regsets (or at least, the amount of meaningful data in a regset)
>> > may change in size.
>> >
>> > In particular, this results in useless padding being added to
>> > coredumps if a regset's current size is smaller than its
>> > theoretical maximum size.
>> >
>> > This patch adds a get_size() function to struct user_regset.
>> > Individual regset implementations can implement this function to
>> > return the current size of the regset data. A regset_size()
>> > function is added to provide callers with an abstract interface for
>> > determining the size of a regset without needing to know whether
>> > the regset is dynamically sized or not.
>> >
>> > The only affected user of this interface is the ELF coredump code:
>> > This patch ports ELF coredump to dump regsets with their actual
>> > size in the coredump. This has no effect except for new regsets
>> > that are dynamically sized and provide a get_size() implementation.
>> >
>> > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
>> > Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
>> > Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
>> > Cc: Oleg Nesterov <oleg@redhat.com>
>> > Cc: Alexander Viro <viro@zeniv.linux.org.uk>
>> > Cc: Thomas Gleixner <tglx@linutronix.de>
>> > Cc: Ingo Molnar <mingo@redhat.com>
>> > Cc: "H. Peter Anvin" <hpa@zytor.com>
>> > Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
>> > Cc: H. J. Lu <hjl.tools@gmail.com>
>> >
>> > ---
>> >
>> > **Dropped** Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
>> > **Dropped** Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
>> > (due to bug fix applied against v4 of this patch.)
>>
>> It seems that the Reviewed-by tags are still there ;). Anyway, on the
>
> Oops, looks like that only happened on this patch. I've removed
> Alex's R-b from my own version in case of repost -- can you also
> do the same?
>
>> new patch:
>>
>> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
You can have my:
Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
>
> Cheers
> ---Dave
--
Alex Benn?e
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 15/30] arm64/sve: Signal handling support
2017-11-07 13:22 ` Alex Bennée
@ 2017-11-08 16:11 ` Dave Martin
-1 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-11-08 16:11 UTC (permalink / raw)
To: Alex Bennée
Cc: linux-arch, Okamoto Takayuki, libc-alpha, Ard Biesheuvel,
Szabolcs Nagy, Catalin Marinas, Will Deacon, kvmarm,
linux-arm-kernel
On Tue, Nov 07, 2017 at 01:22:33PM +0000, Alex Bennée wrote:
>
> Dave Martin <Dave.Martin@arm.com> writes:
>
> > This patch implements support for saving and restoring the SVE
> > registers around signals.
> >
> > A fixed-size header struct sve_context is always included in the
> > signal frame encoding the thread's vector length at the time of
> > signal delivery, optionally followed by a variable-layout structure
> > encoding the SVE registers.
> >
> > Because of the need to preserve backwards compatibility, the FPSIMD
> > view of the SVE registers is always dumped as a struct
> > fpsimd_context in the usual way, in addition to any sve_context.
> >
> > The SVE vector registers are dumped in full, including bits 127:0
> > of each register which alias the corresponding FPSIMD vector
> > registers in the hardware. To avoid any ambiguity about which
> > alias to restore during sigreturn, the kernel always restores bits
> > 127:0 of each SVE vector register from the fpsimd_context in the
> > signal frame (which must be present): userspace needs to take this
> > into account if it wants to modify the SVE vector register contents
> > on return from a signal.
> >
> > FPSR and FPCR, which are used by both FPSIMD and SVE, are not
> > included in sve_context because they are always present in
> > fpsimd_context anyway.
> >
> > For signal delivery, a new helper
> > fpsimd_signal_preserve_current_state() is added to update _both_
> > the FPSIMD and SVE views in the task struct, to make it easier to
> > populate this information into the signal frame. Because of the
> > redundancy between the two views of the state, only one is updated
> > otherwise.
> >
> > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> > Cc: Alex Bennée <alex.bennee@linaro.org>
> > Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> > Cc: Will Deacon <will.deacon@arm.com>
>
> After adding SVE support for RISU I was able to confirm consistent
> signal delivery with a decent context over multiple runs and after
> hacking echo "32" > /proc/sys/abi/sve_default_vector_length to change
> the default length the tests would fail (as expected).
>
> Tested-by: Alex Bennée <alex.bennee@linaro.org>
Good to have confirmation of this, thanks
[...]
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 15/30] arm64/sve: Signal handling support
@ 2017-11-08 16:11 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-11-08 16:11 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Nov 07, 2017 at 01:22:33PM +0000, Alex Benn?e wrote:
>
> Dave Martin <Dave.Martin@arm.com> writes:
>
> > This patch implements support for saving and restoring the SVE
> > registers around signals.
> >
> > A fixed-size header struct sve_context is always included in the
> > signal frame encoding the thread's vector length at the time of
> > signal delivery, optionally followed by a variable-layout structure
> > encoding the SVE registers.
> >
> > Because of the need to preserve backwards compatibility, the FPSIMD
> > view of the SVE registers is always dumped as a struct
> > fpsimd_context in the usual way, in addition to any sve_context.
> >
> > The SVE vector registers are dumped in full, including bits 127:0
> > of each register which alias the corresponding FPSIMD vector
> > registers in the hardware. To avoid any ambiguity about which
> > alias to restore during sigreturn, the kernel always restores bits
> > 127:0 of each SVE vector register from the fpsimd_context in the
> > signal frame (which must be present): userspace needs to take this
> > into account if it wants to modify the SVE vector register contents
> > on return from a signal.
> >
> > FPSR and FPCR, which are used by both FPSIMD and SVE, are not
> > included in sve_context because they are always present in
> > fpsimd_context anyway.
> >
> > For signal delivery, a new helper
> > fpsimd_signal_preserve_current_state() is added to update _both_
> > the FPSIMD and SVE views in the task struct, to make it easier to
> > populate this information into the signal frame. Because of the
> > redundancy between the two views of the state, only one is updated
> > otherwise.
> >
> > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> > Cc: Alex Benn?e <alex.bennee@linaro.org>
> > Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> > Cc: Will Deacon <will.deacon@arm.com>
>
> After adding SVE support for RISU I was able to confirm consistent
> signal delivery with a decent context over multiple runs and after
> hacking echo "32" > /proc/sys/abi/sve_default_vector_length to change
> the default length the tests would fail (as expected).
>
> Tested-by: Alex Benn?e <alex.bennee@linaro.org>
Good to have confirmation of this, thanks
[...]
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 11/30] arm64/sve: Signal frame and context structure definition
@ 2017-11-08 16:34 ` Alex Bennée
0 siblings, 0 replies; 174+ messages in thread
From: Alex Bennée @ 2017-11-08 16:34 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel, Catalin Marinas, Will Deacon, Ard Biesheuvel,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
Dave Martin <Dave.Martin@arm.com> writes:
> This patch defines the representation that will be used for the SVE
> register state in the signal frame, and implements support for
> saving and restoring the SVE registers around signals.
>
> The same layout will also be used for the in-kernel task state.
>
> Due to the variability of the SVE vector length, it is not possible
> to define a fixed C struct to describe all the registers. Instead,
> Macros are defined in sigcontext.h to facilitate access to the
> parts of the structure.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> arch/arm64/include/uapi/asm/sigcontext.h | 117 ++++++++++++++++++++++++++++++-
> 1 file changed, 116 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/include/uapi/asm/sigcontext.h b/arch/arm64/include/uapi/asm/sigcontext.h
> index f0a76b9..7654a81 100644
> --- a/arch/arm64/include/uapi/asm/sigcontext.h
> +++ b/arch/arm64/include/uapi/asm/sigcontext.h
> @@ -16,6 +16,8 @@
> #ifndef _UAPI__ASM_SIGCONTEXT_H
> #define _UAPI__ASM_SIGCONTEXT_H
>
> +#ifndef __ASSEMBLY__
> +
> #include <linux/types.h>
>
> /*
> @@ -41,10 +43,11 @@ struct sigcontext {
> *
> * 0x210 fpsimd_context
> * 0x10 esr_context
> + * 0x8a0 sve_context (vl <= 64) (optional)
> * 0x20 extra_context (optional)
> * 0x10 terminator (null _aarch64_ctx)
> *
> - * 0xdb0 (reserved for future allocation)
> + * 0x510 (reserved for future allocation)
> *
> * New records that can exceed this space need to be opt-in for userspace, so
> * that an expanded signal frame is not generated unexpectedly. The mechanism
> @@ -116,4 +119,116 @@ struct extra_context {
> __u32 __reserved[3];
> };
>
> +#define SVE_MAGIC 0x53564501
> +
> +struct sve_context {
> + struct _aarch64_ctx head;
> + __u16 vl;
> + __u16 __reserved[3];
> +};
> +
> +#endif /* !__ASSEMBLY__ */
> +
> +/*
> + * The SVE architecture leaves space for future expansion of the
> + * vector length beyond its initial architectural limit of 2048 bits
> + * (16 quadwords).
> + */
> +#define SVE_VQ_BYTES 16 /* number of bytes per quadword */
> +
> +#define SVE_VQ_MIN 1
> +#define SVE_VQ_MAX 512
> +
> +#define SVE_VL_MIN (SVE_VQ_MIN * SVE_VQ_BYTES)
> +#define SVE_VL_MAX (SVE_VQ_MAX * SVE_VQ_BYTES)
> +
> +#define SVE_NUM_ZREGS 32
> +#define SVE_NUM_PREGS 16
> +
> +#define sve_vl_valid(vl) \
> + ((vl) % SVE_VQ_BYTES == 0 && (vl) >= SVE_VL_MIN && (vl) <= SVE_VL_MAX)
> +#define sve_vq_from_vl(vl) ((vl) / SVE_VQ_BYTES)
> +#define sve_vl_from_vq(vq) ((vq) * SVE_VQ_BYTES)
> +
> +/*
> + * If the SVE registers are currently live for the thread at signal delivery,
> + * sve_context.head.size >=
> + * SVE_SIG_CONTEXT_SIZE(sve_vq_from_vl(sve_context.vl))
> + * and the register data may be accessed using the SVE_SIG_*() macros.
> + *
> + * If sve_context.head.size <
> + * SVE_SIG_CONTEXT_SIZE(sve_vq_from_vl(sve_context.vl)),
> + * the SVE registers were not live for the thread and no register data
> + * is included: in this case, the SVE_SIG_*() macros should not be
> + * used except for this check.
> + *
> + * The same convention applies when returning from a signal: a caller
> + * will need to remove or resize the sve_context block if it wants to
> + * make the SVE registers live when they were previously non-live or
> + * vice-versa. This may require the the caller to allocate fresh
> + * memory and/or move other context blocks in the signal frame.
> + *
> + * Changing the vector length during signal return is not permitted:
> + * sve_context.vl must equal the thread's current vector length when
> + * doing a sigreturn.
> + *
> + *
> + * Note: for all these macros, the "vq" argument denotes the SVE
> + * vector length in quadwords (i.e., units of 128 bits).
> + *
> + * The correct way to obtain vq is to use sve_vq_from_vl(vl). The
> + * result is valid if and only if sve_vl_valid(vl) is true. This is
> + * guaranteed for a struct sve_context written by the kernel.
> + *
> + *
> + * Additional macros describe the contents and layout of the payload.
> + * For each, SVE_SIG_x_OFFSET(args) is the start offset relative to
> + * the start of struct sve_context, and SVE_SIG_x_SIZE(args) is the
> + * size in bytes:
> + *
> + * x type description
> + * - ---- -----------
> + * REGS the entire SVE context
> + *
> + * ZREGS __uint128_t[SVE_NUM_ZREGS][vq] all Z-registers
> + * ZREG __uint128_t[vq] individual Z-register Zn
> + *
> + * PREGS uint16_t[SVE_NUM_PREGS][vq] all P-registers
> + * PREG uint16_t[vq] individual P-register Pn
> + *
> + * FFR uint16_t[vq] first-fault status register
> + *
> + * Additional data might be appended in the future.
> + */
> +
> +#define SVE_SIG_ZREG_SIZE(vq) ((__u32)(vq) * SVE_VQ_BYTES)
> +#define SVE_SIG_PREG_SIZE(vq) ((__u32)(vq) * (SVE_VQ_BYTES / 8))
> +#define SVE_SIG_FFR_SIZE(vq) SVE_SIG_PREG_SIZE(vq)
> +
> +#define SVE_SIG_REGS_OFFSET \
> + ((sizeof(struct sve_context) + (SVE_VQ_BYTES - 1)) \
> + / SVE_VQ_BYTES * SVE_VQ_BYTES)
> +
> +#define SVE_SIG_ZREGS_OFFSET SVE_SIG_REGS_OFFSET
> +#define SVE_SIG_ZREG_OFFSET(vq, n) \
> + (SVE_SIG_ZREGS_OFFSET + SVE_SIG_ZREG_SIZE(vq) * (n))
> +#define SVE_SIG_ZREGS_SIZE(vq) \
> + (SVE_SIG_ZREG_OFFSET(vq, SVE_NUM_ZREGS) - SVE_SIG_ZREGS_OFFSET)
> +
> +#define SVE_SIG_PREGS_OFFSET(vq) \
> + (SVE_SIG_ZREGS_OFFSET + SVE_SIG_ZREGS_SIZE(vq))
> +#define SVE_SIG_PREG_OFFSET(vq, n) \
> + (SVE_SIG_PREGS_OFFSET(vq) + SVE_SIG_PREG_SIZE(vq) * (n))
> +#define SVE_SIG_PREGS_SIZE(vq) \
> + (SVE_SIG_PREG_OFFSET(vq, SVE_NUM_PREGS) - SVE_SIG_PREGS_OFFSET(vq))
> +
> +#define SVE_SIG_FFR_OFFSET(vq) \
> + (SVE_SIG_PREGS_OFFSET(vq) + SVE_SIG_PREGS_SIZE(vq))
> +
> +#define SVE_SIG_REGS_SIZE(vq) \
> + (SVE_SIG_FFR_OFFSET(vq) + SVE_SIG_FFR_SIZE(vq) - SVE_SIG_REGS_OFFSET)
> +
> +#define SVE_SIG_CONTEXT_SIZE(vq) (SVE_SIG_REGS_OFFSET + SVE_SIG_REGS_SIZE(vq))
> +
> +
> #endif /* _UAPI__ASM_SIGCONTEXT_H */
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 11/30] arm64/sve: Signal frame and context structure definition
@ 2017-11-08 16:34 ` Alex Bennée
0 siblings, 0 replies; 174+ messages in thread
From: Alex Bennée @ 2017-11-08 16:34 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel, Catalin Marinas, Will Deacon, Ard Biesheuvel,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
Dave Martin <Dave.Martin@arm.com> writes:
> This patch defines the representation that will be used for the SVE
> register state in the signal frame, and implements support for
> saving and restoring the SVE registers around signals.
>
> The same layout will also be used for the in-kernel task state.
>
> Due to the variability of the SVE vector length, it is not possible
> to define a fixed C struct to describe all the registers. Instead,
> Macros are defined in sigcontext.h to facilitate access to the
> parts of the structure.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> arch/arm64/include/uapi/asm/sigcontext.h | 117 ++++++++++++++++++++++++++++++-
> 1 file changed, 116 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/include/uapi/asm/sigcontext.h b/arch/arm64/include/uapi/asm/sigcontext.h
> index f0a76b9..7654a81 100644
> --- a/arch/arm64/include/uapi/asm/sigcontext.h
> +++ b/arch/arm64/include/uapi/asm/sigcontext.h
> @@ -16,6 +16,8 @@
> #ifndef _UAPI__ASM_SIGCONTEXT_H
> #define _UAPI__ASM_SIGCONTEXT_H
>
> +#ifndef __ASSEMBLY__
> +
> #include <linux/types.h>
>
> /*
> @@ -41,10 +43,11 @@ struct sigcontext {
> *
> * 0x210 fpsimd_context
> * 0x10 esr_context
> + * 0x8a0 sve_context (vl <= 64) (optional)
> * 0x20 extra_context (optional)
> * 0x10 terminator (null _aarch64_ctx)
> *
> - * 0xdb0 (reserved for future allocation)
> + * 0x510 (reserved for future allocation)
> *
> * New records that can exceed this space need to be opt-in for userspace, so
> * that an expanded signal frame is not generated unexpectedly. The mechanism
> @@ -116,4 +119,116 @@ struct extra_context {
> __u32 __reserved[3];
> };
>
> +#define SVE_MAGIC 0x53564501
> +
> +struct sve_context {
> + struct _aarch64_ctx head;
> + __u16 vl;
> + __u16 __reserved[3];
> +};
> +
> +#endif /* !__ASSEMBLY__ */
> +
> +/*
> + * The SVE architecture leaves space for future expansion of the
> + * vector length beyond its initial architectural limit of 2048 bits
> + * (16 quadwords).
> + */
> +#define SVE_VQ_BYTES 16 /* number of bytes per quadword */
> +
> +#define SVE_VQ_MIN 1
> +#define SVE_VQ_MAX 512
> +
> +#define SVE_VL_MIN (SVE_VQ_MIN * SVE_VQ_BYTES)
> +#define SVE_VL_MAX (SVE_VQ_MAX * SVE_VQ_BYTES)
> +
> +#define SVE_NUM_ZREGS 32
> +#define SVE_NUM_PREGS 16
> +
> +#define sve_vl_valid(vl) \
> + ((vl) % SVE_VQ_BYTES == 0 && (vl) >= SVE_VL_MIN && (vl) <= SVE_VL_MAX)
> +#define sve_vq_from_vl(vl) ((vl) / SVE_VQ_BYTES)
> +#define sve_vl_from_vq(vq) ((vq) * SVE_VQ_BYTES)
> +
> +/*
> + * If the SVE registers are currently live for the thread at signal delivery,
> + * sve_context.head.size >=
> + * SVE_SIG_CONTEXT_SIZE(sve_vq_from_vl(sve_context.vl))
> + * and the register data may be accessed using the SVE_SIG_*() macros.
> + *
> + * If sve_context.head.size <
> + * SVE_SIG_CONTEXT_SIZE(sve_vq_from_vl(sve_context.vl)),
> + * the SVE registers were not live for the thread and no register data
> + * is included: in this case, the SVE_SIG_*() macros should not be
> + * used except for this check.
> + *
> + * The same convention applies when returning from a signal: a caller
> + * will need to remove or resize the sve_context block if it wants to
> + * make the SVE registers live when they were previously non-live or
> + * vice-versa. This may require the the caller to allocate fresh
> + * memory and/or move other context blocks in the signal frame.
> + *
> + * Changing the vector length during signal return is not permitted:
> + * sve_context.vl must equal the thread's current vector length when
> + * doing a sigreturn.
> + *
> + *
> + * Note: for all these macros, the "vq" argument denotes the SVE
> + * vector length in quadwords (i.e., units of 128 bits).
> + *
> + * The correct way to obtain vq is to use sve_vq_from_vl(vl). The
> + * result is valid if and only if sve_vl_valid(vl) is true. This is
> + * guaranteed for a struct sve_context written by the kernel.
> + *
> + *
> + * Additional macros describe the contents and layout of the payload.
> + * For each, SVE_SIG_x_OFFSET(args) is the start offset relative to
> + * the start of struct sve_context, and SVE_SIG_x_SIZE(args) is the
> + * size in bytes:
> + *
> + * x type description
> + * - ---- -----------
> + * REGS the entire SVE context
> + *
> + * ZREGS __uint128_t[SVE_NUM_ZREGS][vq] all Z-registers
> + * ZREG __uint128_t[vq] individual Z-register Zn
> + *
> + * PREGS uint16_t[SVE_NUM_PREGS][vq] all P-registers
> + * PREG uint16_t[vq] individual P-register Pn
> + *
> + * FFR uint16_t[vq] first-fault status register
> + *
> + * Additional data might be appended in the future.
> + */
> +
> +#define SVE_SIG_ZREG_SIZE(vq) ((__u32)(vq) * SVE_VQ_BYTES)
> +#define SVE_SIG_PREG_SIZE(vq) ((__u32)(vq) * (SVE_VQ_BYTES / 8))
> +#define SVE_SIG_FFR_SIZE(vq) SVE_SIG_PREG_SIZE(vq)
> +
> +#define SVE_SIG_REGS_OFFSET \
> + ((sizeof(struct sve_context) + (SVE_VQ_BYTES - 1)) \
> + / SVE_VQ_BYTES * SVE_VQ_BYTES)
> +
> +#define SVE_SIG_ZREGS_OFFSET SVE_SIG_REGS_OFFSET
> +#define SVE_SIG_ZREG_OFFSET(vq, n) \
> + (SVE_SIG_ZREGS_OFFSET + SVE_SIG_ZREG_SIZE(vq) * (n))
> +#define SVE_SIG_ZREGS_SIZE(vq) \
> + (SVE_SIG_ZREG_OFFSET(vq, SVE_NUM_ZREGS) - SVE_SIG_ZREGS_OFFSET)
> +
> +#define SVE_SIG_PREGS_OFFSET(vq) \
> + (SVE_SIG_ZREGS_OFFSET + SVE_SIG_ZREGS_SIZE(vq))
> +#define SVE_SIG_PREG_OFFSET(vq, n) \
> + (SVE_SIG_PREGS_OFFSET(vq) + SVE_SIG_PREG_SIZE(vq) * (n))
> +#define SVE_SIG_PREGS_SIZE(vq) \
> + (SVE_SIG_PREG_OFFSET(vq, SVE_NUM_PREGS) - SVE_SIG_PREGS_OFFSET(vq))
> +
> +#define SVE_SIG_FFR_OFFSET(vq) \
> + (SVE_SIG_PREGS_OFFSET(vq) + SVE_SIG_PREGS_SIZE(vq))
> +
> +#define SVE_SIG_REGS_SIZE(vq) \
> + (SVE_SIG_FFR_OFFSET(vq) + SVE_SIG_FFR_SIZE(vq) - SVE_SIG_REGS_OFFSET)
> +
> +#define SVE_SIG_CONTEXT_SIZE(vq) (SVE_SIG_REGS_OFFSET + SVE_SIG_REGS_SIZE(vq))
> +
> +
> #endif /* _UAPI__ASM_SIGCONTEXT_H */
--
Alex Bennée
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 11/30] arm64/sve: Signal frame and context structure definition
@ 2017-11-08 16:34 ` Alex Bennée
0 siblings, 0 replies; 174+ messages in thread
From: Alex Bennée @ 2017-11-08 16:34 UTC (permalink / raw)
To: linux-arm-kernel
Dave Martin <Dave.Martin@arm.com> writes:
> This patch defines the representation that will be used for the SVE
> register state in the signal frame, and implements support for
> saving and restoring the SVE registers around signals.
>
> The same layout will also be used for the in-kernel task state.
>
> Due to the variability of the SVE vector length, it is not possible
> to define a fixed C struct to describe all the registers. Instead,
> Macros are defined in sigcontext.h to facilitate access to the
> parts of the structure.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Alex Benn?e <alex.bennee@linaro.org>
Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
> ---
> arch/arm64/include/uapi/asm/sigcontext.h | 117 ++++++++++++++++++++++++++++++-
> 1 file changed, 116 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/include/uapi/asm/sigcontext.h b/arch/arm64/include/uapi/asm/sigcontext.h
> index f0a76b9..7654a81 100644
> --- a/arch/arm64/include/uapi/asm/sigcontext.h
> +++ b/arch/arm64/include/uapi/asm/sigcontext.h
> @@ -16,6 +16,8 @@
> #ifndef _UAPI__ASM_SIGCONTEXT_H
> #define _UAPI__ASM_SIGCONTEXT_H
>
> +#ifndef __ASSEMBLY__
> +
> #include <linux/types.h>
>
> /*
> @@ -41,10 +43,11 @@ struct sigcontext {
> *
> * 0x210 fpsimd_context
> * 0x10 esr_context
> + * 0x8a0 sve_context (vl <= 64) (optional)
> * 0x20 extra_context (optional)
> * 0x10 terminator (null _aarch64_ctx)
> *
> - * 0xdb0 (reserved for future allocation)
> + * 0x510 (reserved for future allocation)
> *
> * New records that can exceed this space need to be opt-in for userspace, so
> * that an expanded signal frame is not generated unexpectedly. The mechanism
> @@ -116,4 +119,116 @@ struct extra_context {
> __u32 __reserved[3];
> };
>
> +#define SVE_MAGIC 0x53564501
> +
> +struct sve_context {
> + struct _aarch64_ctx head;
> + __u16 vl;
> + __u16 __reserved[3];
> +};
> +
> +#endif /* !__ASSEMBLY__ */
> +
> +/*
> + * The SVE architecture leaves space for future expansion of the
> + * vector length beyond its initial architectural limit of 2048 bits
> + * (16 quadwords).
> + */
> +#define SVE_VQ_BYTES 16 /* number of bytes per quadword */
> +
> +#define SVE_VQ_MIN 1
> +#define SVE_VQ_MAX 512
> +
> +#define SVE_VL_MIN (SVE_VQ_MIN * SVE_VQ_BYTES)
> +#define SVE_VL_MAX (SVE_VQ_MAX * SVE_VQ_BYTES)
> +
> +#define SVE_NUM_ZREGS 32
> +#define SVE_NUM_PREGS 16
> +
> +#define sve_vl_valid(vl) \
> + ((vl) % SVE_VQ_BYTES == 0 && (vl) >= SVE_VL_MIN && (vl) <= SVE_VL_MAX)
> +#define sve_vq_from_vl(vl) ((vl) / SVE_VQ_BYTES)
> +#define sve_vl_from_vq(vq) ((vq) * SVE_VQ_BYTES)
> +
> +/*
> + * If the SVE registers are currently live for the thread at signal delivery,
> + * sve_context.head.size >=
> + * SVE_SIG_CONTEXT_SIZE(sve_vq_from_vl(sve_context.vl))
> + * and the register data may be accessed using the SVE_SIG_*() macros.
> + *
> + * If sve_context.head.size <
> + * SVE_SIG_CONTEXT_SIZE(sve_vq_from_vl(sve_context.vl)),
> + * the SVE registers were not live for the thread and no register data
> + * is included: in this case, the SVE_SIG_*() macros should not be
> + * used except for this check.
> + *
> + * The same convention applies when returning from a signal: a caller
> + * will need to remove or resize the sve_context block if it wants to
> + * make the SVE registers live when they were previously non-live or
> + * vice-versa. This may require the the caller to allocate fresh
> + * memory and/or move other context blocks in the signal frame.
> + *
> + * Changing the vector length during signal return is not permitted:
> + * sve_context.vl must equal the thread's current vector length when
> + * doing a sigreturn.
> + *
> + *
> + * Note: for all these macros, the "vq" argument denotes the SVE
> + * vector length in quadwords (i.e., units of 128 bits).
> + *
> + * The correct way to obtain vq is to use sve_vq_from_vl(vl). The
> + * result is valid if and only if sve_vl_valid(vl) is true. This is
> + * guaranteed for a struct sve_context written by the kernel.
> + *
> + *
> + * Additional macros describe the contents and layout of the payload.
> + * For each, SVE_SIG_x_OFFSET(args) is the start offset relative to
> + * the start of struct sve_context, and SVE_SIG_x_SIZE(args) is the
> + * size in bytes:
> + *
> + * x type description
> + * - ---- -----------
> + * REGS the entire SVE context
> + *
> + * ZREGS __uint128_t[SVE_NUM_ZREGS][vq] all Z-registers
> + * ZREG __uint128_t[vq] individual Z-register Zn
> + *
> + * PREGS uint16_t[SVE_NUM_PREGS][vq] all P-registers
> + * PREG uint16_t[vq] individual P-register Pn
> + *
> + * FFR uint16_t[vq] first-fault status register
> + *
> + * Additional data might be appended in the future.
> + */
> +
> +#define SVE_SIG_ZREG_SIZE(vq) ((__u32)(vq) * SVE_VQ_BYTES)
> +#define SVE_SIG_PREG_SIZE(vq) ((__u32)(vq) * (SVE_VQ_BYTES / 8))
> +#define SVE_SIG_FFR_SIZE(vq) SVE_SIG_PREG_SIZE(vq)
> +
> +#define SVE_SIG_REGS_OFFSET \
> + ((sizeof(struct sve_context) + (SVE_VQ_BYTES - 1)) \
> + / SVE_VQ_BYTES * SVE_VQ_BYTES)
> +
> +#define SVE_SIG_ZREGS_OFFSET SVE_SIG_REGS_OFFSET
> +#define SVE_SIG_ZREG_OFFSET(vq, n) \
> + (SVE_SIG_ZREGS_OFFSET + SVE_SIG_ZREG_SIZE(vq) * (n))
> +#define SVE_SIG_ZREGS_SIZE(vq) \
> + (SVE_SIG_ZREG_OFFSET(vq, SVE_NUM_ZREGS) - SVE_SIG_ZREGS_OFFSET)
> +
> +#define SVE_SIG_PREGS_OFFSET(vq) \
> + (SVE_SIG_ZREGS_OFFSET + SVE_SIG_ZREGS_SIZE(vq))
> +#define SVE_SIG_PREG_OFFSET(vq, n) \
> + (SVE_SIG_PREGS_OFFSET(vq) + SVE_SIG_PREG_SIZE(vq) * (n))
> +#define SVE_SIG_PREGS_SIZE(vq) \
> + (SVE_SIG_PREG_OFFSET(vq, SVE_NUM_PREGS) - SVE_SIG_PREGS_OFFSET(vq))
> +
> +#define SVE_SIG_FFR_OFFSET(vq) \
> + (SVE_SIG_PREGS_OFFSET(vq) + SVE_SIG_PREGS_SIZE(vq))
> +
> +#define SVE_SIG_REGS_SIZE(vq) \
> + (SVE_SIG_FFR_OFFSET(vq) + SVE_SIG_FFR_SIZE(vq) - SVE_SIG_REGS_OFFSET)
> +
> +#define SVE_SIG_CONTEXT_SIZE(vq) (SVE_SIG_REGS_OFFSET + SVE_SIG_REGS_SIZE(vq))
> +
> +
> #endif /* _UAPI__ASM_SIGCONTEXT_H */
--
Alex Benn?e
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 12/30] arm64/sve: Low-level CPU setup
@ 2017-11-08 16:37 ` Alex Bennée
0 siblings, 0 replies; 174+ messages in thread
From: Alex Bennée @ 2017-11-08 16:37 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel, Catalin Marinas, Will Deacon, Ard Biesheuvel,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
Dave Martin <Dave.Martin@arm.com> writes:
> To enable the kernel to use SVE, SVE traps from EL1 to EL2 must be
> disabled. To take maximum advantage of the hardware, the full
> available vector length also needs to be enabled for EL1 by
> programming ZCR_EL2.LEN. (The kernel will program ZCR_EL1.LEN as
> required, but this cannot override the limit set by ZCR_EL2.)
>
> This patch makes the appropriate changes to the EL2 early setup
> code.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Alex Bennée <alex.bennee@linaro.org>
>
> ---
>
> **Dropped at v3** Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
> (Due to significant changes to the logic.)
Have it back:
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> arch/arm64/kernel/head.S | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
> index cfa90a4..67e86a0 100644
> --- a/arch/arm64/kernel/head.S
> +++ b/arch/arm64/kernel/head.S
> @@ -524,8 +524,19 @@ CPU_LE( movk x0, #0x30d0, lsl #16 ) // Clear EE and E0E on LE systems
> mov x0, #0x33ff
> msr cptr_el2, x0 // Disable copro. traps to EL2
>
> + /* SVE register access */
> + mrs x1, id_aa64pfr0_el1
> + ubfx x1, x1, #ID_AA64PFR0_SVE_SHIFT, #4
> + cbz x1, 7f
> +
> + bic x0, x0, #CPTR_EL2_TZ // Also disable SVE traps
> + msr cptr_el2, x0 // Disable copro. traps to EL2
> + isb
> + mov x1, #ZCR_ELx_LEN_MASK // SVE: Enable full vector
> + msr_s SYS_ZCR_EL2, x1 // length for EL1.
> +
> /* Hypervisor stub */
> - adr_l x0, __hyp_stub_vectors
> +7: adr_l x0, __hyp_stub_vectors
> msr vbar_el2, x0
>
> /* spsr */
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 12/30] arm64/sve: Low-level CPU setup
@ 2017-11-08 16:37 ` Alex Bennée
0 siblings, 0 replies; 174+ messages in thread
From: Alex Bennée @ 2017-11-08 16:37 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel, Catalin Marinas, Will Deacon, Ard Biesheuvel,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
Dave Martin <Dave.Martin@arm.com> writes:
> To enable the kernel to use SVE, SVE traps from EL1 to EL2 must be
> disabled. To take maximum advantage of the hardware, the full
> available vector length also needs to be enabled for EL1 by
> programming ZCR_EL2.LEN. (The kernel will program ZCR_EL1.LEN as
> required, but this cannot override the limit set by ZCR_EL2.)
>
> This patch makes the appropriate changes to the EL2 early setup
> code.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Alex Bennée <alex.bennee@linaro.org>
>
> ---
>
> **Dropped at v3** Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
> (Due to significant changes to the logic.)
Have it back:
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> arch/arm64/kernel/head.S | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
> index cfa90a4..67e86a0 100644
> --- a/arch/arm64/kernel/head.S
> +++ b/arch/arm64/kernel/head.S
> @@ -524,8 +524,19 @@ CPU_LE( movk x0, #0x30d0, lsl #16 ) // Clear EE and E0E on LE systems
> mov x0, #0x33ff
> msr cptr_el2, x0 // Disable copro. traps to EL2
>
> + /* SVE register access */
> + mrs x1, id_aa64pfr0_el1
> + ubfx x1, x1, #ID_AA64PFR0_SVE_SHIFT, #4
> + cbz x1, 7f
> +
> + bic x0, x0, #CPTR_EL2_TZ // Also disable SVE traps
> + msr cptr_el2, x0 // Disable copro. traps to EL2
> + isb
> + mov x1, #ZCR_ELx_LEN_MASK // SVE: Enable full vector
> + msr_s SYS_ZCR_EL2, x1 // length for EL1.
> +
> /* Hypervisor stub */
> - adr_l x0, __hyp_stub_vectors
> +7: adr_l x0, __hyp_stub_vectors
> msr vbar_el2, x0
>
> /* spsr */
--
Alex Bennée
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 12/30] arm64/sve: Low-level CPU setup
@ 2017-11-08 16:37 ` Alex Bennée
0 siblings, 0 replies; 174+ messages in thread
From: Alex Bennée @ 2017-11-08 16:37 UTC (permalink / raw)
To: linux-arm-kernel
Dave Martin <Dave.Martin@arm.com> writes:
> To enable the kernel to use SVE, SVE traps from EL1 to EL2 must be
> disabled. To take maximum advantage of the hardware, the full
> available vector length also needs to be enabled for EL1 by
> programming ZCR_EL2.LEN. (The kernel will program ZCR_EL1.LEN as
> required, but this cannot override the limit set by ZCR_EL2.)
>
> This patch makes the appropriate changes to the EL2 early setup
> code.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Alex Benn?e <alex.bennee@linaro.org>
>
> ---
>
> **Dropped at v3** Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
> (Due to significant changes to the logic.)
Have it back:
Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
> ---
> arch/arm64/kernel/head.S | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
> index cfa90a4..67e86a0 100644
> --- a/arch/arm64/kernel/head.S
> +++ b/arch/arm64/kernel/head.S
> @@ -524,8 +524,19 @@ CPU_LE( movk x0, #0x30d0, lsl #16 ) // Clear EE and E0E on LE systems
> mov x0, #0x33ff
> msr cptr_el2, x0 // Disable copro. traps to EL2
>
> + /* SVE register access */
> + mrs x1, id_aa64pfr0_el1
> + ubfx x1, x1, #ID_AA64PFR0_SVE_SHIFT, #4
> + cbz x1, 7f
> +
> + bic x0, x0, #CPTR_EL2_TZ // Also disable SVE traps
> + msr cptr_el2, x0 // Disable copro. traps to EL2
> + isb
> + mov x1, #ZCR_ELx_LEN_MASK // SVE: Enable full vector
> + msr_s SYS_ZCR_EL2, x1 // length for EL1.
> +
> /* Hypervisor stub */
> - adr_l x0, __hyp_stub_vectors
> +7: adr_l x0, __hyp_stub_vectors
> msr vbar_el2, x0
>
> /* spsr */
--
Alex Benn?e
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 13/30] arm64/sve: Core task context handling
@ 2017-11-09 17:16 ` Alex Bennée
0 siblings, 0 replies; 174+ messages in thread
From: Alex Bennée @ 2017-11-09 17:16 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel, Catalin Marinas, Will Deacon, Ard Biesheuvel,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
Dave Martin <Dave.Martin@arm.com> writes:
> This patch adds the core support for switching and managing the SVE
> architectural state of user tasks.
>
> Calls to the existing FPSIMD low-level save/restore functions are
> factored out as new functions task_fpsimd_{save,load}(), since SVE
> now dynamically may or may not need to be handled at these points
> depending on the kernel configuration, hardware features discovered
> at boot, and the runtime state of the task. To make these
> decisions as fast as possible, const cpucaps are used where
> feasible, via the system_supports_sve() helper.
>
> The SVE registers are only tracked for threads that have explicitly
> used SVE, indicated by the new thread flag TIF_SVE. Otherwise, the
> FPSIMD view of the architectural state is stored in
> thread.fpsimd_state as usual.
>
> When in use, the SVE registers are not stored directly in
> thread_struct due to their potentially large and variable size.
> Because the task_struct slab allocator must be configured very
> early during kernel boot, it is also tricky to configure it
> correctly to match the maximum vector length provided by the
> hardware, since this depends on examining secondary CPUs as well as
> the primary. Instead, a pointer sve_state in thread_struct points
> to a dynamically allocated buffer containing the SVE register data,
> and code is added to allocate and free this buffer at appropriate
> times.
>
> TIF_SVE is set when taking an SVE access trap from userspace, if
> suitable hardware support has been detected. This enables SVE for
> the thread: a subsequent return to userspace will disable the trap
> accordingly. If such a trap is taken without sufficient system-
> wide hardware support, SIGILL is sent to the thread instead as if
> an undefined instruction had been executed: this may happen if
> userspace tries to use SVE in a system where not all CPUs support
> it for example.
>
> The kernel will clear TIF_SVE and disable SVE for the thread
> whenever an explicit syscall is made by userspace. For backwards
> compatibility reasons and conformance with the spirit of the base
> AArch64 procedure call standard, the subset of the SVE register
> state that aliases the FPSIMD registers is still preserved across a
> syscall even if this happens. The remainder of the SVE register
> state logically becomes zero at syscall entry, though the actual
> zeroing work is currently deferred until the thread next tries to
> use SVE, causing another trap to the kernel. This implementation
> is suboptimal: in the future, the fastpath case may be optimised
> to zero the registers in-place and leave SVE enabled for the task,
> where beneficial.
>
> TIF_SVE is also cleared in the following slowpath cases, which are
> taken as reasonable hints that the task may no longer use SVE:
> * exec
> * fork and clone
>
> Code is added to sync data between thread.fpsimd_state and
> thread.sve_state whenever enabling/disabling SVE, in a manner
> consistent with the SVE architectural programmer's model.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Cc: Alex Bennée <alex.bennee@linaro.org>
>
> ---
>
> Kept Catalin's Reviewed-by, since this is a trivial change.
>
> Changes since v4
> ----------------
>
> Miscellaneous:
>
> * Mark do_sve_acc() as asmlinkage.
>
> (Semantic correctness only; no functional impact.)
> ---
> arch/arm64/include/asm/fpsimd.h | 16 ++
> arch/arm64/include/asm/processor.h | 2 +
> arch/arm64/include/asm/thread_info.h | 4 +
> arch/arm64/include/asm/traps.h | 2 +
> arch/arm64/kernel/entry.S | 39 ++++-
> arch/arm64/kernel/fpsimd.c | 324 ++++++++++++++++++++++++++++++++++-
> arch/arm64/kernel/process.c | 24 +++
> arch/arm64/kernel/traps.c | 6 +-
> 8 files changed, 406 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
> index 026a7c7..5655fe1 100644
> --- a/arch/arm64/include/asm/fpsimd.h
> +++ b/arch/arm64/include/asm/fpsimd.h
> @@ -20,6 +20,8 @@
>
> #ifndef __ASSEMBLY__
>
> +#include <linux/stddef.h>
> +
> /*
> * FP/SIMD storage area has:
> * - FPSR and FPCR
> @@ -72,6 +74,20 @@ extern void sve_load_state(void const *state, u32 const *pfpsr,
> unsigned long vq_minus_1);
> extern unsigned int sve_get_vl(void);
>
> +#ifdef CONFIG_ARM64_SVE
> +
> +extern size_t sve_state_size(struct task_struct const *task);
> +
> +extern void sve_alloc(struct task_struct *task);
> +extern void fpsimd_release_task(struct task_struct *task);
> +
> +#else /* ! CONFIG_ARM64_SVE */
> +
> +static inline void sve_alloc(struct task_struct *task) { }
> +static inline void fpsimd_release_task(struct task_struct *task) { }
> +
> +#endif /* ! CONFIG_ARM64_SVE */
> +
> /* For use by EFI runtime services calls only */
> extern void __efi_fpsimd_begin(void);
> extern void __efi_fpsimd_end(void);
> diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
> index 7dddca2..e2f575d 100644
> --- a/arch/arm64/include/asm/processor.h
> +++ b/arch/arm64/include/asm/processor.h
> @@ -105,6 +105,8 @@ struct thread_struct {
> unsigned long tp2_value;
> #endif
> struct fpsimd_state fpsimd_state;
> + void *sve_state; /* SVE registers, if any */
> + unsigned int sve_vl; /* SVE vector length */
> unsigned long fault_address; /* fault info */
> unsigned long fault_code; /* ESR_EL1 value */
> struct debug_info debug; /* debugging */
> diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
> index ddded64..92b7b48 100644
> --- a/arch/arm64/include/asm/thread_info.h
> +++ b/arch/arm64/include/asm/thread_info.h
> @@ -63,6 +63,8 @@ struct thread_info {
> void arch_setup_new_exec(void);
> #define arch_setup_new_exec arch_setup_new_exec
>
> +void arch_release_task_struct(struct task_struct *tsk);
> +
> #endif
>
> /*
> @@ -92,6 +94,7 @@ void arch_setup_new_exec(void);
> #define TIF_RESTORE_SIGMASK 20
> #define TIF_SINGLESTEP 21
> #define TIF_32BIT 22 /* 32bit process */
> +#define TIF_SVE 23 /* Scalable Vector Extension in use */
>
> #define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
> #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
> @@ -105,6 +108,7 @@ void arch_setup_new_exec(void);
> #define _TIF_UPROBE (1 << TIF_UPROBE)
> #define _TIF_FSCHECK (1 << TIF_FSCHECK)
> #define _TIF_32BIT (1 << TIF_32BIT)
> +#define _TIF_SVE (1 << TIF_SVE)
>
> #define _TIF_WORK_MASK (_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
> _TIF_NOTIFY_RESUME | _TIF_FOREIGN_FPSTATE | \
> diff --git a/arch/arm64/include/asm/traps.h b/arch/arm64/include/asm/traps.h
> index 45e3da3..1696f9d 100644
> --- a/arch/arm64/include/asm/traps.h
> +++ b/arch/arm64/include/asm/traps.h
> @@ -34,6 +34,8 @@ struct undef_hook {
>
> void register_undef_hook(struct undef_hook *hook);
> void unregister_undef_hook(struct undef_hook *hook);
> +void force_signal_inject(int signal, int code, struct pt_regs *regs,
> + unsigned long address);
>
> void arm64_notify_segfault(struct pt_regs *regs, unsigned long addr);
>
> diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
> index f5e851e..56e848f 100644
> --- a/arch/arm64/kernel/entry.S
> +++ b/arch/arm64/kernel/entry.S
> @@ -607,6 +607,8 @@ el0_sync:
> b.eq el0_ia
> cmp x24, #ESR_ELx_EC_FP_ASIMD // FP/ASIMD access
> b.eq el0_fpsimd_acc
> + cmp x24, #ESR_ELx_EC_SVE // SVE access
> + b.eq el0_sve_acc
I'm guessing there is a point that this long chain of cmp instructions
is better handled with a jump table? One for the maintainer though I
guess?
> cmp x24, #ESR_ELx_EC_FP_EXC64 // FP/ASIMD exception
> b.eq el0_fpsimd_exc
> cmp x24, #ESR_ELx_EC_SYS64 // configurable trap
> @@ -658,6 +660,7 @@ el0_svc_compat:
> /*
> * AArch32 syscall handling
> */
> + ldr x16, [tsk, #TSK_TI_FLAGS] // load thread flags
> adrp stbl, compat_sys_call_table // load compat syscall table pointer
> mov wscno, w7 // syscall number in w7 (r7)
> mov wsc_nr, #__NR_compat_syscalls
> @@ -705,9 +708,19 @@ el0_fpsimd_acc:
> mov x1, sp
> bl do_fpsimd_acc
> b ret_to_user
> +el0_sve_acc:
> + /*
> + * Scalable Vector Extension access
> + */
> + enable_dbg_and_irq
> + ct_user_exit
> + mov x0, x25
> + mov x1, sp
> + bl do_sve_acc
> + b ret_to_user
> el0_fpsimd_exc:
> /*
> - * Floating Point or Advanced SIMD exception
> + * Floating Point, Advanced SIMD or SVE exception
> */
> enable_dbg
> ct_user_exit
> @@ -835,16 +848,36 @@ ENDPROC(ret_to_user)
> */
> .align 6
> el0_svc:
> + ldr x16, [tsk, #TSK_TI_FLAGS] // load thread flags
> adrp stbl, sys_call_table // load syscall table pointer
> mov wscno, w8 // syscall number in w8
> mov wsc_nr, #__NR_syscalls
> +
> +#ifndef CONFIG_ARM64_SVE
> + b el0_svc_naked
Hmm we've hoisted the ldr x16, [tsk, #TSK_TI_FLAGS] out of el0_svc_naked
but we'll still be testing the bit when CONFIG_ARM64_SVE isn't enabled?
I'm not clear why you couldn't keep that where it was?
> +#else
> + tbz x16, #TIF_SVE, el0_svc_naked // Skip unless TIF_SVE set:
> + bic x16, x16, #_TIF_SVE // discard SVE state
> + str x16, [tsk, #TSK_TI_FLAGS]
> +
> + /*
> + * task_fpsimd_load() won't be called to update CPACR_EL1 in
> + * ret_to_user unless TIF_FOREIGN_FPSTATE is still set, which only
> + * happens if a context switch or kernel_neon_begin() or context
> + * modification (sigreturn, ptrace) intervenes.
> + * So, ensure that CPACR_EL1 is already correct for the fast-path case:
> + */
> + mrs x9, cpacr_el1
> + bic x9, x9, #CPACR_EL1_ZEN_EL0EN // disable SVE for el0
> + msr cpacr_el1, x9 // synchronised by eret to el0
> +#endif /* CONFIG_ARM64_SVE */
> +
> el0_svc_naked: // compat entry point
> stp x0, xscno, [sp, #S_ORIG_X0] // save the original x0 and syscall number
> enable_dbg_and_irq
> ct_user_exit 1
>
> - ldr x16, [tsk, #TSK_TI_FLAGS] // check for syscall hooks
> - tst x16, #_TIF_SYSCALL_WORK
> + tst x16, #_TIF_SYSCALL_WORK // check for syscall hooks
> b.ne __sys_trace
> cmp wscno, wsc_nr // check upper syscall limit
> b.hs ni_sys
> diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
> index 2baba0d..787f5d3 100644
> --- a/arch/arm64/kernel/fpsimd.c
> +++ b/arch/arm64/kernel/fpsimd.c
> @@ -18,19 +18,27 @@
> */
>
> #include <linux/bottom_half.h>
> +#include <linux/bug.h>
> +#include <linux/compat.h>
> #include <linux/cpu.h>
> #include <linux/cpu_pm.h>
> #include <linux/kernel.h>
> #include <linux/linkage.h>
> +#include <linux/irqflags.h>
> #include <linux/init.h>
> #include <linux/percpu.h>
> #include <linux/preempt.h>
> +#include <linux/ptrace.h>
> #include <linux/sched/signal.h>
> #include <linux/signal.h>
> +#include <linux/slab.h>
>
> #include <asm/fpsimd.h>
> #include <asm/cputype.h>
> #include <asm/simd.h>
> +#include <asm/sigcontext.h>
> +#include <asm/sysreg.h>
> +#include <asm/traps.h>
>
> #define FPEXC_IOF (1 << 0)
> #define FPEXC_DZF (1 << 1)
> @@ -40,6 +48,8 @@
> #define FPEXC_IDF (1 << 7)
>
> /*
> + * (Note: in this discussion, statements about FPSIMD apply equally to SVE.)
> + *
> * In order to reduce the number of times the FPSIMD state is needlessly saved
> * and restored, we need to keep track of two things:
> * (a) for each task, we need to remember which CPU was the last one to have
> @@ -101,6 +111,279 @@
> static DEFINE_PER_CPU(struct fpsimd_state *, fpsimd_last_state);
>
> /*
> + * Call __sve_free() directly only if you know task can't be scheduled
> + * or preempted.
> + */
> +static void __sve_free(struct task_struct *task)
> +{
> + kfree(task->thread.sve_state);
> + task->thread.sve_state = NULL;
> +}
> +
> +static void sve_free(struct task_struct *task)
> +{
> + WARN_ON(test_tsk_thread_flag(task, TIF_SVE));
> +
> + __sve_free(task);
> +}
> +
> +
> +/* Offset of FFR in the SVE register dump */
> +static size_t sve_ffr_offset(int vl)
> +{
> + return SVE_SIG_FFR_OFFSET(sve_vq_from_vl(vl)) - SVE_SIG_REGS_OFFSET;
> +}
> +
> +static void *sve_pffr(struct task_struct *task)
> +{
> + return (char *)task->thread.sve_state +
> + sve_ffr_offset(task->thread.sve_vl);
> +}
> +
> +static void change_cpacr(u64 val, u64 mask)
> +{
> + u64 cpacr = read_sysreg(CPACR_EL1);
> + u64 new = (cpacr & ~mask) | val;
> +
> + if (new != cpacr)
> + write_sysreg(new, CPACR_EL1);
> +}
> +
> +static void sve_user_disable(void)
> +{
> + change_cpacr(0, CPACR_EL1_ZEN_EL0EN);
> +}
> +
> +static void sve_user_enable(void)
> +{
> + change_cpacr(CPACR_EL1_ZEN_EL0EN, CPACR_EL1_ZEN_EL0EN);
> +}
> +
> +/*
> + * TIF_SVE controls whether a task can use SVE without trapping while
> + * in userspace, and also the way a task's FPSIMD/SVE state is stored
> + * in thread_struct.
> + *
> + * The kernel uses this flag to track whether a user task is actively
> + * using SVE, and therefore whether full SVE register state needs to
> + * be tracked. If not, the cheaper FPSIMD context handling code can
> + * be used instead of the more costly SVE equivalents.
> + *
> + * * TIF_SVE set:
> + *
> + * The task can execute SVE instructions while in userspace without
> + * trapping to the kernel.
> + *
> + * When stored, Z0-Z31 (incorporating Vn in bits[127:0] or the
> + * corresponding Zn), P0-P15 and FFR are encoded in in
> + * task->thread.sve_state, formatted appropriately for vector
> + * length task->thread.sve_vl.
> + *
> + * task->thread.sve_state must point to a valid buffer at least
> + * sve_state_size(task) bytes in size.
> + *
> + * During any syscall, the kernel may optionally clear TIF_SVE and
> + * discard the vector state except for the FPSIMD subset.
> + *
> + * * TIF_SVE clear:
> + *
> + * An attempt by the user task to execute an SVE instruction causes
> + * do_sve_acc() to be called, which does some preparation and then
> + * sets TIF_SVE.
> + *
> + * When stored, FPSIMD registers V0-V31 are encoded in
> + * task->fpsimd_state; bits [max : 128] for each of Z0-Z31 are
> + * logically zero but not stored anywhere; P0-P15 and FFR are not
> + * stored and have unspecified values from userspace's point of
> + * view. For hygiene purposes, the kernel zeroes them on next use,
> + * but userspace is discouraged from relying on this.
> + *
> + * task->thread.sve_state does not need to be non-NULL, valid or any
> + * particular size: it must not be dereferenced.
> + *
> + * * FPSR and FPCR are always stored in task->fpsimd_state irrespctive of
> + * whether TIF_SVE is clear or set, since these are not vector length
> + * dependent.
> + */
> +
> +/*
> + * Update current's FPSIMD/SVE registers from thread_struct.
> + *
> + * This function should be called only when the FPSIMD/SVE state in
> + * thread_struct is known to be up to date, when preparing to enter
> + * userspace.
> + *
> + * Softirqs (and preemption) must be disabled.
> + */
> +static void task_fpsimd_load(void)
> +{
> + WARN_ON(!in_softirq() && !irqs_disabled());
> +
> + if (system_supports_sve() && test_thread_flag(TIF_SVE))
> + sve_load_state(sve_pffr(current),
> + ¤t->thread.fpsimd_state.fpsr,
> + sve_vq_from_vl(current->thread.sve_vl) - 1);
> + else
> + fpsimd_load_state(¤t->thread.fpsimd_state);
> +
> + if (system_supports_sve()) {
> + /* Toggle SVE trapping for userspace if needed */
> + if (test_thread_flag(TIF_SVE))
> + sve_user_enable();
> + else
> + sve_user_disable();
> +
> + /* Serialised by exception return to user */
> + }
> +}
> +
> +/*
> + * Ensure current's FPSIMD/SVE storage in thread_struct is up to date
> + * with respect to the CPU registers.
> + *
> + * Softirqs (and preemption) must be disabled.
> + */
> +static void task_fpsimd_save(void)
> +{
> + WARN_ON(!in_softirq() && !irqs_disabled());
> +
> + if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
> + if (system_supports_sve() && test_thread_flag(TIF_SVE)) {
> + if (WARN_ON(sve_get_vl() != current->thread.sve_vl)) {
> + /*
> + * Can't save the user regs, so current would
> + * re-enter user with corrupt state.
> + * There's no way to recover, so kill it:
> + */
> + force_signal_inject(
> + SIGKILL, 0, current_pt_regs(), 0);
> + return;
> + }
> +
> + sve_save_state(sve_pffr(current),
> + ¤t->thread.fpsimd_state.fpsr);
> + } else
> + fpsimd_save_state(¤t->thread.fpsimd_state);
> + }
> +}
> +
> +#define ZREG(sve_state, vq, n) ((char *)(sve_state) + \
> + (SVE_SIG_ZREG_OFFSET(vq, n) - SVE_SIG_REGS_OFFSET))
> +
> +/*
> + * Transfer the FPSIMD state in task->thread.fpsimd_state to
> + * task->thread.sve_state.
> + *
> + * Task can be a non-runnable task, or current. In the latter case,
> + * softirqs (and preemption) must be disabled.
> + * task->thread.sve_state must point to at least sve_state_size(task)
> + * bytes of allocated kernel memory.
> + * task->thread.fpsimd_state must be up to date before calling this function.
> + */
> +static void fpsimd_to_sve(struct task_struct *task)
> +{
> + unsigned int vq;
> + void *sst = task->thread.sve_state;
> + struct fpsimd_state const *fst = &task->thread.fpsimd_state;
> + unsigned int i;
> +
> + if (!system_supports_sve())
> + return;
> +
> + vq = sve_vq_from_vl(task->thread.sve_vl);
> + for (i = 0; i < 32; ++i)
> + memcpy(ZREG(sst, vq, i), &fst->vregs[i],
> + sizeof(fst->vregs[i]));
> +}
> +
> +#ifdef CONFIG_ARM64_SVE
> +
> +/*
> + * Return how many bytes of memory are required to store the full SVE
> + * state for task, given task's currently configured vector length.
> + */
> +size_t sve_state_size(struct task_struct const *task)
> +{
> + return SVE_SIG_REGS_SIZE(sve_vq_from_vl(task->thread.sve_vl));
> +}
> +
> +/*
> + * Ensure that task->thread.sve_state is allocated and sufficiently large.
> + *
> + * This function should be used only in preparation for replacing
> + * task->thread.sve_state with new data. The memory is always zeroed
> + * here to prevent stale data from showing through: this is done in
> + * the interest of testability and predictability: except in the
> + * do_sve_acc() case, there is no ABI requirement to hide stale data
> + * written previously be task.
> + */
> +void sve_alloc(struct task_struct *task)
> +{
> + if (task->thread.sve_state) {
> + memset(task->thread.sve_state, 0, sve_state_size(current));
> + return;
> + }
> +
> + /* This is a small allocation (maximum ~8KB) and Should Not Fail. */
> + task->thread.sve_state =
> + kzalloc(sve_state_size(task), GFP_KERNEL);
> +
> + /*
> + * If future SVE revisions can have larger vectors though,
> + * this may cease to be true:
> + */
> + BUG_ON(!task->thread.sve_state);
> +}
> +
> +/*
> + * Called from the put_task_struct() path, which cannot get here
> + * unless dead_task is really dead and not schedulable.
> + */
> +void fpsimd_release_task(struct task_struct *dead_task)
> +{
> + __sve_free(dead_task);
> +}
> +
> +#endif /* CONFIG_ARM64_SVE */
> +
> +/*
> + * Trapped SVE access
> + *
> + * Storage is allocated for the full SVE state, the current FPSIMD
> + * register contents are migrated across, and TIF_SVE is set so that
> + * the SVE access trap will be disabled the next time this task
> + * reaches ret_to_user.
> + *
> + * TIF_SVE should be clear on entry: otherwise, task_fpsimd_load()
> + * would have disabled the SVE access trap for userspace during
> + * ret_to_user, making an SVE access trap impossible in that case.
> + */
> +asmlinkage void do_sve_acc(unsigned int esr, struct pt_regs *regs)
> +{
> + /* Even if we chose not to use SVE, the hardware could still trap: */
> + if (unlikely(!system_supports_sve()) || WARN_ON(is_compat_task())) {
> + force_signal_inject(SIGILL, ILL_ILLOPC, regs, 0);
> + return;
> + }
> +
> + sve_alloc(current);
> +
> + local_bh_disable();
> +
> + task_fpsimd_save();
> + fpsimd_to_sve(current);
> +
> + /* Force ret_to_user to reload the registers: */
> + fpsimd_flush_task_state(current);
> + set_thread_flag(TIF_FOREIGN_FPSTATE);
> +
> + if (test_and_set_thread_flag(TIF_SVE))
> + WARN_ON(1); /* SVE access shouldn't have trapped */
> +
> + local_bh_enable();
> +}
> +
> +/*
> * Trapped FP/ASIMD access.
> */
> asmlinkage void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs)
> @@ -145,8 +428,8 @@ void fpsimd_thread_switch(struct task_struct *next)
> * the registers is in fact the most recent userland FPSIMD state of
> * 'current'.
> */
> - if (current->mm && !test_thread_flag(TIF_FOREIGN_FPSTATE))
> - fpsimd_save_state(¤t->thread.fpsimd_state);
> + if (current->mm)
> + task_fpsimd_save();
>
> if (next->mm) {
> /*
> @@ -168,6 +451,8 @@ void fpsimd_thread_switch(struct task_struct *next)
>
> void fpsimd_flush_thread(void)
> {
> + int vl;
> +
> if (!system_supports_fpsimd())
> return;
>
> @@ -175,6 +460,30 @@ void fpsimd_flush_thread(void)
>
> memset(¤t->thread.fpsimd_state, 0, sizeof(struct fpsimd_state));
> fpsimd_flush_task_state(current);
> +
> + if (system_supports_sve()) {
> + clear_thread_flag(TIF_SVE);
> + sve_free(current);
> +
> + /*
> + * Reset the task vector length as required.
> + * This is where we ensure that all user tasks have a valid
> + * vector length configured: no kernel task can become a user
> + * task without an exec and hence a call to this function.
> + * If a bug causes this to go wrong, we make some noise and
> + * try to fudge thread.sve_vl to a safe value here.
> + */
> + vl = current->thread.sve_vl;
> +
> + if (vl == 0)
> + vl = SVE_VL_MIN;
> +
> + if (WARN_ON(!sve_vl_valid(vl)))
> + vl = SVE_VL_MIN;
> +
> + current->thread.sve_vl = vl;
> + }
> +
> set_thread_flag(TIF_FOREIGN_FPSTATE);
>
> local_bh_enable();
> @@ -183,6 +492,9 @@ void fpsimd_flush_thread(void)
> /*
> * Save the userland FPSIMD state of 'current' to memory, but only if the state
> * currently held in the registers does in fact belong to 'current'
> + *
> + * Currently, SVE tasks can't exist, so just WARN in that case.
> + * Subsequent patches will add full SVE support here.
> */
> void fpsimd_preserve_current_state(void)
> {
> @@ -194,6 +506,8 @@ void fpsimd_preserve_current_state(void)
> if (!test_thread_flag(TIF_FOREIGN_FPSTATE))
> fpsimd_save_state(¤t->thread.fpsimd_state);
>
> + WARN_ON_ONCE(test_and_clear_thread_flag(TIF_SVE));
> +
> local_bh_enable();
> }
>
> @@ -212,7 +526,7 @@ void fpsimd_restore_current_state(void)
> if (test_and_clear_thread_flag(TIF_FOREIGN_FPSTATE)) {
> struct fpsimd_state *st = ¤t->thread.fpsimd_state;
>
> - fpsimd_load_state(st);
> + task_fpsimd_load();
> __this_cpu_write(fpsimd_last_state, st);
> st->cpu = smp_processor_id();
> }
> @@ -381,8 +695,8 @@ static int fpsimd_cpu_pm_notifier(struct notifier_block *self,
> {
> switch (cmd) {
> case CPU_PM_ENTER:
> - if (current->mm && !test_thread_flag(TIF_FOREIGN_FPSTATE))
> - fpsimd_save_state(¤t->thread.fpsimd_state);
> + if (current->mm)
> + task_fpsimd_save();
> this_cpu_write(fpsimd_last_state, NULL);
> break;
> case CPU_PM_EXIT:
> diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
> index c15ec41..b2adcce 100644
> --- a/arch/arm64/kernel/process.c
> +++ b/arch/arm64/kernel/process.c
> @@ -49,6 +49,7 @@
> #include <linux/notifier.h>
> #include <trace/events/power.h>
> #include <linux/percpu.h>
> +#include <linux/thread_info.h>
>
> #include <asm/alternative.h>
> #include <asm/compat.h>
> @@ -273,11 +274,27 @@ void release_thread(struct task_struct *dead_task)
> {
> }
>
> +void arch_release_task_struct(struct task_struct *tsk)
> +{
> + fpsimd_release_task(tsk);
> +}
> +
> +/*
> + * src and dst may temporarily have aliased sve_state after task_struct
> + * is copied. We cannot fix this properly here, because src may have
> + * live SVE state and dst's thread_info may not exist yet, so tweaking
> + * either src's or dst's TIF_SVE is not safe.
> + *
> + * The unaliasing is done in copy_thread() instead. This works because
> + * dst is not schedulable or traceable until both of these functions
> + * have been called.
> + */
> int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
> {
> if (current->mm)
> fpsimd_preserve_current_state();
> *dst = *src;
> +
> return 0;
> }
>
> @@ -290,6 +307,13 @@ int copy_thread(unsigned long clone_flags, unsigned long stack_start,
>
> memset(&p->thread.cpu_context, 0, sizeof(struct cpu_context));
>
> + /*
> + * Unalias p->thread.sve_state (if any) from the parent task
> + * and disable discard SVE state for p:
> + */
> + clear_tsk_thread_flag(p, TIF_SVE);
> + p->thread.sve_state = NULL;
> +
> if (likely(!(p->flags & PF_KTHREAD))) {
> *childregs = *current_pt_regs();
> childregs->regs[0] = 0;
> diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
> index 18c0290..9d3c7f0 100644
> --- a/arch/arm64/kernel/traps.c
> +++ b/arch/arm64/kernel/traps.c
> @@ -310,8 +310,8 @@ static int call_undef_hook(struct pt_regs *regs)
> return fn ? fn(regs, instr) : 1;
> }
>
> -static void force_signal_inject(int signal, int code, struct pt_regs *regs,
> - unsigned long address)
> +void force_signal_inject(int signal, int code, struct pt_regs *regs,
> + unsigned long address)
> {
> siginfo_t info;
> void __user *pc = (void __user *)instruction_pointer(regs);
> @@ -325,7 +325,7 @@ static void force_signal_inject(int signal, int code, struct pt_regs *regs,
> desc = "illegal memory access";
> break;
> default:
> - desc = "bad mode";
> + desc = "unknown or unrecoverable error";
> break;
> }
Is this a separate trivial clean-up patch? It seems like you should
handle SIGKILL explicitly?
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 13/30] arm64/sve: Core task context handling
@ 2017-11-09 17:16 ` Alex Bennée
0 siblings, 0 replies; 174+ messages in thread
From: Alex Bennée @ 2017-11-09 17:16 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel, Catalin Marinas, Will Deacon, Ard Biesheuvel,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
Dave Martin <Dave.Martin@arm.com> writes:
> This patch adds the core support for switching and managing the SVE
> architectural state of user tasks.
>
> Calls to the existing FPSIMD low-level save/restore functions are
> factored out as new functions task_fpsimd_{save,load}(), since SVE
> now dynamically may or may not need to be handled at these points
> depending on the kernel configuration, hardware features discovered
> at boot, and the runtime state of the task. To make these
> decisions as fast as possible, const cpucaps are used where
> feasible, via the system_supports_sve() helper.
>
> The SVE registers are only tracked for threads that have explicitly
> used SVE, indicated by the new thread flag TIF_SVE. Otherwise, the
> FPSIMD view of the architectural state is stored in
> thread.fpsimd_state as usual.
>
> When in use, the SVE registers are not stored directly in
> thread_struct due to their potentially large and variable size.
> Because the task_struct slab allocator must be configured very
> early during kernel boot, it is also tricky to configure it
> correctly to match the maximum vector length provided by the
> hardware, since this depends on examining secondary CPUs as well as
> the primary. Instead, a pointer sve_state in thread_struct points
> to a dynamically allocated buffer containing the SVE register data,
> and code is added to allocate and free this buffer at appropriate
> times.
>
> TIF_SVE is set when taking an SVE access trap from userspace, if
> suitable hardware support has been detected. This enables SVE for
> the thread: a subsequent return to userspace will disable the trap
> accordingly. If such a trap is taken without sufficient system-
> wide hardware support, SIGILL is sent to the thread instead as if
> an undefined instruction had been executed: this may happen if
> userspace tries to use SVE in a system where not all CPUs support
> it for example.
>
> The kernel will clear TIF_SVE and disable SVE for the thread
> whenever an explicit syscall is made by userspace. For backwards
> compatibility reasons and conformance with the spirit of the base
> AArch64 procedure call standard, the subset of the SVE register
> state that aliases the FPSIMD registers is still preserved across a
> syscall even if this happens. The remainder of the SVE register
> state logically becomes zero at syscall entry, though the actual
> zeroing work is currently deferred until the thread next tries to
> use SVE, causing another trap to the kernel. This implementation
> is suboptimal: in the future, the fastpath case may be optimised
> to zero the registers in-place and leave SVE enabled for the task,
> where beneficial.
>
> TIF_SVE is also cleared in the following slowpath cases, which are
> taken as reasonable hints that the task may no longer use SVE:
> * exec
> * fork and clone
>
> Code is added to sync data between thread.fpsimd_state and
> thread.sve_state whenever enabling/disabling SVE, in a manner
> consistent with the SVE architectural programmer's model.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Cc: Alex Bennée <alex.bennee@linaro.org>
>
> ---
>
> Kept Catalin's Reviewed-by, since this is a trivial change.
>
> Changes since v4
> ----------------
>
> Miscellaneous:
>
> * Mark do_sve_acc() as asmlinkage.
>
> (Semantic correctness only; no functional impact.)
> ---
> arch/arm64/include/asm/fpsimd.h | 16 ++
> arch/arm64/include/asm/processor.h | 2 +
> arch/arm64/include/asm/thread_info.h | 4 +
> arch/arm64/include/asm/traps.h | 2 +
> arch/arm64/kernel/entry.S | 39 ++++-
> arch/arm64/kernel/fpsimd.c | 324 ++++++++++++++++++++++++++++++++++-
> arch/arm64/kernel/process.c | 24 +++
> arch/arm64/kernel/traps.c | 6 +-
> 8 files changed, 406 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
> index 026a7c7..5655fe1 100644
> --- a/arch/arm64/include/asm/fpsimd.h
> +++ b/arch/arm64/include/asm/fpsimd.h
> @@ -20,6 +20,8 @@
>
> #ifndef __ASSEMBLY__
>
> +#include <linux/stddef.h>
> +
> /*
> * FP/SIMD storage area has:
> * - FPSR and FPCR
> @@ -72,6 +74,20 @@ extern void sve_load_state(void const *state, u32 const *pfpsr,
> unsigned long vq_minus_1);
> extern unsigned int sve_get_vl(void);
>
> +#ifdef CONFIG_ARM64_SVE
> +
> +extern size_t sve_state_size(struct task_struct const *task);
> +
> +extern void sve_alloc(struct task_struct *task);
> +extern void fpsimd_release_task(struct task_struct *task);
> +
> +#else /* ! CONFIG_ARM64_SVE */
> +
> +static inline void sve_alloc(struct task_struct *task) { }
> +static inline void fpsimd_release_task(struct task_struct *task) { }
> +
> +#endif /* ! CONFIG_ARM64_SVE */
> +
> /* For use by EFI runtime services calls only */
> extern void __efi_fpsimd_begin(void);
> extern void __efi_fpsimd_end(void);
> diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
> index 7dddca2..e2f575d 100644
> --- a/arch/arm64/include/asm/processor.h
> +++ b/arch/arm64/include/asm/processor.h
> @@ -105,6 +105,8 @@ struct thread_struct {
> unsigned long tp2_value;
> #endif
> struct fpsimd_state fpsimd_state;
> + void *sve_state; /* SVE registers, if any */
> + unsigned int sve_vl; /* SVE vector length */
> unsigned long fault_address; /* fault info */
> unsigned long fault_code; /* ESR_EL1 value */
> struct debug_info debug; /* debugging */
> diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
> index ddded64..92b7b48 100644
> --- a/arch/arm64/include/asm/thread_info.h
> +++ b/arch/arm64/include/asm/thread_info.h
> @@ -63,6 +63,8 @@ struct thread_info {
> void arch_setup_new_exec(void);
> #define arch_setup_new_exec arch_setup_new_exec
>
> +void arch_release_task_struct(struct task_struct *tsk);
> +
> #endif
>
> /*
> @@ -92,6 +94,7 @@ void arch_setup_new_exec(void);
> #define TIF_RESTORE_SIGMASK 20
> #define TIF_SINGLESTEP 21
> #define TIF_32BIT 22 /* 32bit process */
> +#define TIF_SVE 23 /* Scalable Vector Extension in use */
>
> #define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
> #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
> @@ -105,6 +108,7 @@ void arch_setup_new_exec(void);
> #define _TIF_UPROBE (1 << TIF_UPROBE)
> #define _TIF_FSCHECK (1 << TIF_FSCHECK)
> #define _TIF_32BIT (1 << TIF_32BIT)
> +#define _TIF_SVE (1 << TIF_SVE)
>
> #define _TIF_WORK_MASK (_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
> _TIF_NOTIFY_RESUME | _TIF_FOREIGN_FPSTATE | \
> diff --git a/arch/arm64/include/asm/traps.h b/arch/arm64/include/asm/traps.h
> index 45e3da3..1696f9d 100644
> --- a/arch/arm64/include/asm/traps.h
> +++ b/arch/arm64/include/asm/traps.h
> @@ -34,6 +34,8 @@ struct undef_hook {
>
> void register_undef_hook(struct undef_hook *hook);
> void unregister_undef_hook(struct undef_hook *hook);
> +void force_signal_inject(int signal, int code, struct pt_regs *regs,
> + unsigned long address);
>
> void arm64_notify_segfault(struct pt_regs *regs, unsigned long addr);
>
> diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
> index f5e851e..56e848f 100644
> --- a/arch/arm64/kernel/entry.S
> +++ b/arch/arm64/kernel/entry.S
> @@ -607,6 +607,8 @@ el0_sync:
> b.eq el0_ia
> cmp x24, #ESR_ELx_EC_FP_ASIMD // FP/ASIMD access
> b.eq el0_fpsimd_acc
> + cmp x24, #ESR_ELx_EC_SVE // SVE access
> + b.eq el0_sve_acc
I'm guessing there is a point that this long chain of cmp instructions
is better handled with a jump table? One for the maintainer though I
guess?
> cmp x24, #ESR_ELx_EC_FP_EXC64 // FP/ASIMD exception
> b.eq el0_fpsimd_exc
> cmp x24, #ESR_ELx_EC_SYS64 // configurable trap
> @@ -658,6 +660,7 @@ el0_svc_compat:
> /*
> * AArch32 syscall handling
> */
> + ldr x16, [tsk, #TSK_TI_FLAGS] // load thread flags
> adrp stbl, compat_sys_call_table // load compat syscall table pointer
> mov wscno, w7 // syscall number in w7 (r7)
> mov wsc_nr, #__NR_compat_syscalls
> @@ -705,9 +708,19 @@ el0_fpsimd_acc:
> mov x1, sp
> bl do_fpsimd_acc
> b ret_to_user
> +el0_sve_acc:
> + /*
> + * Scalable Vector Extension access
> + */
> + enable_dbg_and_irq
> + ct_user_exit
> + mov x0, x25
> + mov x1, sp
> + bl do_sve_acc
> + b ret_to_user
> el0_fpsimd_exc:
> /*
> - * Floating Point or Advanced SIMD exception
> + * Floating Point, Advanced SIMD or SVE exception
> */
> enable_dbg
> ct_user_exit
> @@ -835,16 +848,36 @@ ENDPROC(ret_to_user)
> */
> .align 6
> el0_svc:
> + ldr x16, [tsk, #TSK_TI_FLAGS] // load thread flags
> adrp stbl, sys_call_table // load syscall table pointer
> mov wscno, w8 // syscall number in w8
> mov wsc_nr, #__NR_syscalls
> +
> +#ifndef CONFIG_ARM64_SVE
> + b el0_svc_naked
Hmm we've hoisted the ldr x16, [tsk, #TSK_TI_FLAGS] out of el0_svc_naked
but we'll still be testing the bit when CONFIG_ARM64_SVE isn't enabled?
I'm not clear why you couldn't keep that where it was?
> +#else
> + tbz x16, #TIF_SVE, el0_svc_naked // Skip unless TIF_SVE set:
> + bic x16, x16, #_TIF_SVE // discard SVE state
> + str x16, [tsk, #TSK_TI_FLAGS]
> +
> + /*
> + * task_fpsimd_load() won't be called to update CPACR_EL1 in
> + * ret_to_user unless TIF_FOREIGN_FPSTATE is still set, which only
> + * happens if a context switch or kernel_neon_begin() or context
> + * modification (sigreturn, ptrace) intervenes.
> + * So, ensure that CPACR_EL1 is already correct for the fast-path case:
> + */
> + mrs x9, cpacr_el1
> + bic x9, x9, #CPACR_EL1_ZEN_EL0EN // disable SVE for el0
> + msr cpacr_el1, x9 // synchronised by eret to el0
> +#endif /* CONFIG_ARM64_SVE */
> +
> el0_svc_naked: // compat entry point
> stp x0, xscno, [sp, #S_ORIG_X0] // save the original x0 and syscall number
> enable_dbg_and_irq
> ct_user_exit 1
>
> - ldr x16, [tsk, #TSK_TI_FLAGS] // check for syscall hooks
> - tst x16, #_TIF_SYSCALL_WORK
> + tst x16, #_TIF_SYSCALL_WORK // check for syscall hooks
> b.ne __sys_trace
> cmp wscno, wsc_nr // check upper syscall limit
> b.hs ni_sys
> diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
> index 2baba0d..787f5d3 100644
> --- a/arch/arm64/kernel/fpsimd.c
> +++ b/arch/arm64/kernel/fpsimd.c
> @@ -18,19 +18,27 @@
> */
>
> #include <linux/bottom_half.h>
> +#include <linux/bug.h>
> +#include <linux/compat.h>
> #include <linux/cpu.h>
> #include <linux/cpu_pm.h>
> #include <linux/kernel.h>
> #include <linux/linkage.h>
> +#include <linux/irqflags.h>
> #include <linux/init.h>
> #include <linux/percpu.h>
> #include <linux/preempt.h>
> +#include <linux/ptrace.h>
> #include <linux/sched/signal.h>
> #include <linux/signal.h>
> +#include <linux/slab.h>
>
> #include <asm/fpsimd.h>
> #include <asm/cputype.h>
> #include <asm/simd.h>
> +#include <asm/sigcontext.h>
> +#include <asm/sysreg.h>
> +#include <asm/traps.h>
>
> #define FPEXC_IOF (1 << 0)
> #define FPEXC_DZF (1 << 1)
> @@ -40,6 +48,8 @@
> #define FPEXC_IDF (1 << 7)
>
> /*
> + * (Note: in this discussion, statements about FPSIMD apply equally to SVE.)
> + *
> * In order to reduce the number of times the FPSIMD state is needlessly saved
> * and restored, we need to keep track of two things:
> * (a) for each task, we need to remember which CPU was the last one to have
> @@ -101,6 +111,279 @@
> static DEFINE_PER_CPU(struct fpsimd_state *, fpsimd_last_state);
>
> /*
> + * Call __sve_free() directly only if you know task can't be scheduled
> + * or preempted.
> + */
> +static void __sve_free(struct task_struct *task)
> +{
> + kfree(task->thread.sve_state);
> + task->thread.sve_state = NULL;
> +}
> +
> +static void sve_free(struct task_struct *task)
> +{
> + WARN_ON(test_tsk_thread_flag(task, TIF_SVE));
> +
> + __sve_free(task);
> +}
> +
> +
> +/* Offset of FFR in the SVE register dump */
> +static size_t sve_ffr_offset(int vl)
> +{
> + return SVE_SIG_FFR_OFFSET(sve_vq_from_vl(vl)) - SVE_SIG_REGS_OFFSET;
> +}
> +
> +static void *sve_pffr(struct task_struct *task)
> +{
> + return (char *)task->thread.sve_state +
> + sve_ffr_offset(task->thread.sve_vl);
> +}
> +
> +static void change_cpacr(u64 val, u64 mask)
> +{
> + u64 cpacr = read_sysreg(CPACR_EL1);
> + u64 new = (cpacr & ~mask) | val;
> +
> + if (new != cpacr)
> + write_sysreg(new, CPACR_EL1);
> +}
> +
> +static void sve_user_disable(void)
> +{
> + change_cpacr(0, CPACR_EL1_ZEN_EL0EN);
> +}
> +
> +static void sve_user_enable(void)
> +{
> + change_cpacr(CPACR_EL1_ZEN_EL0EN, CPACR_EL1_ZEN_EL0EN);
> +}
> +
> +/*
> + * TIF_SVE controls whether a task can use SVE without trapping while
> + * in userspace, and also the way a task's FPSIMD/SVE state is stored
> + * in thread_struct.
> + *
> + * The kernel uses this flag to track whether a user task is actively
> + * using SVE, and therefore whether full SVE register state needs to
> + * be tracked. If not, the cheaper FPSIMD context handling code can
> + * be used instead of the more costly SVE equivalents.
> + *
> + * * TIF_SVE set:
> + *
> + * The task can execute SVE instructions while in userspace without
> + * trapping to the kernel.
> + *
> + * When stored, Z0-Z31 (incorporating Vn in bits[127:0] or the
> + * corresponding Zn), P0-P15 and FFR are encoded in in
> + * task->thread.sve_state, formatted appropriately for vector
> + * length task->thread.sve_vl.
> + *
> + * task->thread.sve_state must point to a valid buffer at least
> + * sve_state_size(task) bytes in size.
> + *
> + * During any syscall, the kernel may optionally clear TIF_SVE and
> + * discard the vector state except for the FPSIMD subset.
> + *
> + * * TIF_SVE clear:
> + *
> + * An attempt by the user task to execute an SVE instruction causes
> + * do_sve_acc() to be called, which does some preparation and then
> + * sets TIF_SVE.
> + *
> + * When stored, FPSIMD registers V0-V31 are encoded in
> + * task->fpsimd_state; bits [max : 128] for each of Z0-Z31 are
> + * logically zero but not stored anywhere; P0-P15 and FFR are not
> + * stored and have unspecified values from userspace's point of
> + * view. For hygiene purposes, the kernel zeroes them on next use,
> + * but userspace is discouraged from relying on this.
> + *
> + * task->thread.sve_state does not need to be non-NULL, valid or any
> + * particular size: it must not be dereferenced.
> + *
> + * * FPSR and FPCR are always stored in task->fpsimd_state irrespctive of
> + * whether TIF_SVE is clear or set, since these are not vector length
> + * dependent.
> + */
> +
> +/*
> + * Update current's FPSIMD/SVE registers from thread_struct.
> + *
> + * This function should be called only when the FPSIMD/SVE state in
> + * thread_struct is known to be up to date, when preparing to enter
> + * userspace.
> + *
> + * Softirqs (and preemption) must be disabled.
> + */
> +static void task_fpsimd_load(void)
> +{
> + WARN_ON(!in_softirq() && !irqs_disabled());
> +
> + if (system_supports_sve() && test_thread_flag(TIF_SVE))
> + sve_load_state(sve_pffr(current),
> + ¤t->thread.fpsimd_state.fpsr,
> + sve_vq_from_vl(current->thread.sve_vl) - 1);
> + else
> + fpsimd_load_state(¤t->thread.fpsimd_state);
> +
> + if (system_supports_sve()) {
> + /* Toggle SVE trapping for userspace if needed */
> + if (test_thread_flag(TIF_SVE))
> + sve_user_enable();
> + else
> + sve_user_disable();
> +
> + /* Serialised by exception return to user */
> + }
> +}
> +
> +/*
> + * Ensure current's FPSIMD/SVE storage in thread_struct is up to date
> + * with respect to the CPU registers.
> + *
> + * Softirqs (and preemption) must be disabled.
> + */
> +static void task_fpsimd_save(void)
> +{
> + WARN_ON(!in_softirq() && !irqs_disabled());
> +
> + if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
> + if (system_supports_sve() && test_thread_flag(TIF_SVE)) {
> + if (WARN_ON(sve_get_vl() != current->thread.sve_vl)) {
> + /*
> + * Can't save the user regs, so current would
> + * re-enter user with corrupt state.
> + * There's no way to recover, so kill it:
> + */
> + force_signal_inject(
> + SIGKILL, 0, current_pt_regs(), 0);
> + return;
> + }
> +
> + sve_save_state(sve_pffr(current),
> + ¤t->thread.fpsimd_state.fpsr);
> + } else
> + fpsimd_save_state(¤t->thread.fpsimd_state);
> + }
> +}
> +
> +#define ZREG(sve_state, vq, n) ((char *)(sve_state) + \
> + (SVE_SIG_ZREG_OFFSET(vq, n) - SVE_SIG_REGS_OFFSET))
> +
> +/*
> + * Transfer the FPSIMD state in task->thread.fpsimd_state to
> + * task->thread.sve_state.
> + *
> + * Task can be a non-runnable task, or current. In the latter case,
> + * softirqs (and preemption) must be disabled.
> + * task->thread.sve_state must point to at least sve_state_size(task)
> + * bytes of allocated kernel memory.
> + * task->thread.fpsimd_state must be up to date before calling this function.
> + */
> +static void fpsimd_to_sve(struct task_struct *task)
> +{
> + unsigned int vq;
> + void *sst = task->thread.sve_state;
> + struct fpsimd_state const *fst = &task->thread.fpsimd_state;
> + unsigned int i;
> +
> + if (!system_supports_sve())
> + return;
> +
> + vq = sve_vq_from_vl(task->thread.sve_vl);
> + for (i = 0; i < 32; ++i)
> + memcpy(ZREG(sst, vq, i), &fst->vregs[i],
> + sizeof(fst->vregs[i]));
> +}
> +
> +#ifdef CONFIG_ARM64_SVE
> +
> +/*
> + * Return how many bytes of memory are required to store the full SVE
> + * state for task, given task's currently configured vector length.
> + */
> +size_t sve_state_size(struct task_struct const *task)
> +{
> + return SVE_SIG_REGS_SIZE(sve_vq_from_vl(task->thread.sve_vl));
> +}
> +
> +/*
> + * Ensure that task->thread.sve_state is allocated and sufficiently large.
> + *
> + * This function should be used only in preparation for replacing
> + * task->thread.sve_state with new data. The memory is always zeroed
> + * here to prevent stale data from showing through: this is done in
> + * the interest of testability and predictability: except in the
> + * do_sve_acc() case, there is no ABI requirement to hide stale data
> + * written previously be task.
> + */
> +void sve_alloc(struct task_struct *task)
> +{
> + if (task->thread.sve_state) {
> + memset(task->thread.sve_state, 0, sve_state_size(current));
> + return;
> + }
> +
> + /* This is a small allocation (maximum ~8KB) and Should Not Fail. */
> + task->thread.sve_state =
> + kzalloc(sve_state_size(task), GFP_KERNEL);
> +
> + /*
> + * If future SVE revisions can have larger vectors though,
> + * this may cease to be true:
> + */
> + BUG_ON(!task->thread.sve_state);
> +}
> +
> +/*
> + * Called from the put_task_struct() path, which cannot get here
> + * unless dead_task is really dead and not schedulable.
> + */
> +void fpsimd_release_task(struct task_struct *dead_task)
> +{
> + __sve_free(dead_task);
> +}
> +
> +#endif /* CONFIG_ARM64_SVE */
> +
> +/*
> + * Trapped SVE access
> + *
> + * Storage is allocated for the full SVE state, the current FPSIMD
> + * register contents are migrated across, and TIF_SVE is set so that
> + * the SVE access trap will be disabled the next time this task
> + * reaches ret_to_user.
> + *
> + * TIF_SVE should be clear on entry: otherwise, task_fpsimd_load()
> + * would have disabled the SVE access trap for userspace during
> + * ret_to_user, making an SVE access trap impossible in that case.
> + */
> +asmlinkage void do_sve_acc(unsigned int esr, struct pt_regs *regs)
> +{
> + /* Even if we chose not to use SVE, the hardware could still trap: */
> + if (unlikely(!system_supports_sve()) || WARN_ON(is_compat_task())) {
> + force_signal_inject(SIGILL, ILL_ILLOPC, regs, 0);
> + return;
> + }
> +
> + sve_alloc(current);
> +
> + local_bh_disable();
> +
> + task_fpsimd_save();
> + fpsimd_to_sve(current);
> +
> + /* Force ret_to_user to reload the registers: */
> + fpsimd_flush_task_state(current);
> + set_thread_flag(TIF_FOREIGN_FPSTATE);
> +
> + if (test_and_set_thread_flag(TIF_SVE))
> + WARN_ON(1); /* SVE access shouldn't have trapped */
> +
> + local_bh_enable();
> +}
> +
> +/*
> * Trapped FP/ASIMD access.
> */
> asmlinkage void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs)
> @@ -145,8 +428,8 @@ void fpsimd_thread_switch(struct task_struct *next)
> * the registers is in fact the most recent userland FPSIMD state of
> * 'current'.
> */
> - if (current->mm && !test_thread_flag(TIF_FOREIGN_FPSTATE))
> - fpsimd_save_state(¤t->thread.fpsimd_state);
> + if (current->mm)
> + task_fpsimd_save();
>
> if (next->mm) {
> /*
> @@ -168,6 +451,8 @@ void fpsimd_thread_switch(struct task_struct *next)
>
> void fpsimd_flush_thread(void)
> {
> + int vl;
> +
> if (!system_supports_fpsimd())
> return;
>
> @@ -175,6 +460,30 @@ void fpsimd_flush_thread(void)
>
> memset(¤t->thread.fpsimd_state, 0, sizeof(struct fpsimd_state));
> fpsimd_flush_task_state(current);
> +
> + if (system_supports_sve()) {
> + clear_thread_flag(TIF_SVE);
> + sve_free(current);
> +
> + /*
> + * Reset the task vector length as required.
> + * This is where we ensure that all user tasks have a valid
> + * vector length configured: no kernel task can become a user
> + * task without an exec and hence a call to this function.
> + * If a bug causes this to go wrong, we make some noise and
> + * try to fudge thread.sve_vl to a safe value here.
> + */
> + vl = current->thread.sve_vl;
> +
> + if (vl == 0)
> + vl = SVE_VL_MIN;
> +
> + if (WARN_ON(!sve_vl_valid(vl)))
> + vl = SVE_VL_MIN;
> +
> + current->thread.sve_vl = vl;
> + }
> +
> set_thread_flag(TIF_FOREIGN_FPSTATE);
>
> local_bh_enable();
> @@ -183,6 +492,9 @@ void fpsimd_flush_thread(void)
> /*
> * Save the userland FPSIMD state of 'current' to memory, but only if the state
> * currently held in the registers does in fact belong to 'current'
> + *
> + * Currently, SVE tasks can't exist, so just WARN in that case.
> + * Subsequent patches will add full SVE support here.
> */
> void fpsimd_preserve_current_state(void)
> {
> @@ -194,6 +506,8 @@ void fpsimd_preserve_current_state(void)
> if (!test_thread_flag(TIF_FOREIGN_FPSTATE))
> fpsimd_save_state(¤t->thread.fpsimd_state);
>
> + WARN_ON_ONCE(test_and_clear_thread_flag(TIF_SVE));
> +
> local_bh_enable();
> }
>
> @@ -212,7 +526,7 @@ void fpsimd_restore_current_state(void)
> if (test_and_clear_thread_flag(TIF_FOREIGN_FPSTATE)) {
> struct fpsimd_state *st = ¤t->thread.fpsimd_state;
>
> - fpsimd_load_state(st);
> + task_fpsimd_load();
> __this_cpu_write(fpsimd_last_state, st);
> st->cpu = smp_processor_id();
> }
> @@ -381,8 +695,8 @@ static int fpsimd_cpu_pm_notifier(struct notifier_block *self,
> {
> switch (cmd) {
> case CPU_PM_ENTER:
> - if (current->mm && !test_thread_flag(TIF_FOREIGN_FPSTATE))
> - fpsimd_save_state(¤t->thread.fpsimd_state);
> + if (current->mm)
> + task_fpsimd_save();
> this_cpu_write(fpsimd_last_state, NULL);
> break;
> case CPU_PM_EXIT:
> diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
> index c15ec41..b2adcce 100644
> --- a/arch/arm64/kernel/process.c
> +++ b/arch/arm64/kernel/process.c
> @@ -49,6 +49,7 @@
> #include <linux/notifier.h>
> #include <trace/events/power.h>
> #include <linux/percpu.h>
> +#include <linux/thread_info.h>
>
> #include <asm/alternative.h>
> #include <asm/compat.h>
> @@ -273,11 +274,27 @@ void release_thread(struct task_struct *dead_task)
> {
> }
>
> +void arch_release_task_struct(struct task_struct *tsk)
> +{
> + fpsimd_release_task(tsk);
> +}
> +
> +/*
> + * src and dst may temporarily have aliased sve_state after task_struct
> + * is copied. We cannot fix this properly here, because src may have
> + * live SVE state and dst's thread_info may not exist yet, so tweaking
> + * either src's or dst's TIF_SVE is not safe.
> + *
> + * The unaliasing is done in copy_thread() instead. This works because
> + * dst is not schedulable or traceable until both of these functions
> + * have been called.
> + */
> int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
> {
> if (current->mm)
> fpsimd_preserve_current_state();
> *dst = *src;
> +
> return 0;
> }
>
> @@ -290,6 +307,13 @@ int copy_thread(unsigned long clone_flags, unsigned long stack_start,
>
> memset(&p->thread.cpu_context, 0, sizeof(struct cpu_context));
>
> + /*
> + * Unalias p->thread.sve_state (if any) from the parent task
> + * and disable discard SVE state for p:
> + */
> + clear_tsk_thread_flag(p, TIF_SVE);
> + p->thread.sve_state = NULL;
> +
> if (likely(!(p->flags & PF_KTHREAD))) {
> *childregs = *current_pt_regs();
> childregs->regs[0] = 0;
> diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
> index 18c0290..9d3c7f0 100644
> --- a/arch/arm64/kernel/traps.c
> +++ b/arch/arm64/kernel/traps.c
> @@ -310,8 +310,8 @@ static int call_undef_hook(struct pt_regs *regs)
> return fn ? fn(regs, instr) : 1;
> }
>
> -static void force_signal_inject(int signal, int code, struct pt_regs *regs,
> - unsigned long address)
> +void force_signal_inject(int signal, int code, struct pt_regs *regs,
> + unsigned long address)
> {
> siginfo_t info;
> void __user *pc = (void __user *)instruction_pointer(regs);
> @@ -325,7 +325,7 @@ static void force_signal_inject(int signal, int code, struct pt_regs *regs,
> desc = "illegal memory access";
> break;
> default:
> - desc = "bad mode";
> + desc = "unknown or unrecoverable error";
> break;
> }
Is this a separate trivial clean-up patch? It seems like you should
handle SIGKILL explicitly?
--
Alex Bennée
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 13/30] arm64/sve: Core task context handling
@ 2017-11-09 17:16 ` Alex Bennée
0 siblings, 0 replies; 174+ messages in thread
From: Alex Bennée @ 2017-11-09 17:16 UTC (permalink / raw)
To: linux-arm-kernel
Dave Martin <Dave.Martin@arm.com> writes:
> This patch adds the core support for switching and managing the SVE
> architectural state of user tasks.
>
> Calls to the existing FPSIMD low-level save/restore functions are
> factored out as new functions task_fpsimd_{save,load}(), since SVE
> now dynamically may or may not need to be handled at these points
> depending on the kernel configuration, hardware features discovered
> at boot, and the runtime state of the task. To make these
> decisions as fast as possible, const cpucaps are used where
> feasible, via the system_supports_sve() helper.
>
> The SVE registers are only tracked for threads that have explicitly
> used SVE, indicated by the new thread flag TIF_SVE. Otherwise, the
> FPSIMD view of the architectural state is stored in
> thread.fpsimd_state as usual.
>
> When in use, the SVE registers are not stored directly in
> thread_struct due to their potentially large and variable size.
> Because the task_struct slab allocator must be configured very
> early during kernel boot, it is also tricky to configure it
> correctly to match the maximum vector length provided by the
> hardware, since this depends on examining secondary CPUs as well as
> the primary. Instead, a pointer sve_state in thread_struct points
> to a dynamically allocated buffer containing the SVE register data,
> and code is added to allocate and free this buffer at appropriate
> times.
>
> TIF_SVE is set when taking an SVE access trap from userspace, if
> suitable hardware support has been detected. This enables SVE for
> the thread: a subsequent return to userspace will disable the trap
> accordingly. If such a trap is taken without sufficient system-
> wide hardware support, SIGILL is sent to the thread instead as if
> an undefined instruction had been executed: this may happen if
> userspace tries to use SVE in a system where not all CPUs support
> it for example.
>
> The kernel will clear TIF_SVE and disable SVE for the thread
> whenever an explicit syscall is made by userspace. For backwards
> compatibility reasons and conformance with the spirit of the base
> AArch64 procedure call standard, the subset of the SVE register
> state that aliases the FPSIMD registers is still preserved across a
> syscall even if this happens. The remainder of the SVE register
> state logically becomes zero at syscall entry, though the actual
> zeroing work is currently deferred until the thread next tries to
> use SVE, causing another trap to the kernel. This implementation
> is suboptimal: in the future, the fastpath case may be optimised
> to zero the registers in-place and leave SVE enabled for the task,
> where beneficial.
>
> TIF_SVE is also cleared in the following slowpath cases, which are
> taken as reasonable hints that the task may no longer use SVE:
> * exec
> * fork and clone
>
> Code is added to sync data between thread.fpsimd_state and
> thread.sve_state whenever enabling/disabling SVE, in a manner
> consistent with the SVE architectural programmer's model.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Cc: Alex Benn?e <alex.bennee@linaro.org>
>
> ---
>
> Kept Catalin's Reviewed-by, since this is a trivial change.
>
> Changes since v4
> ----------------
>
> Miscellaneous:
>
> * Mark do_sve_acc() as asmlinkage.
>
> (Semantic correctness only; no functional impact.)
> ---
> arch/arm64/include/asm/fpsimd.h | 16 ++
> arch/arm64/include/asm/processor.h | 2 +
> arch/arm64/include/asm/thread_info.h | 4 +
> arch/arm64/include/asm/traps.h | 2 +
> arch/arm64/kernel/entry.S | 39 ++++-
> arch/arm64/kernel/fpsimd.c | 324 ++++++++++++++++++++++++++++++++++-
> arch/arm64/kernel/process.c | 24 +++
> arch/arm64/kernel/traps.c | 6 +-
> 8 files changed, 406 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
> index 026a7c7..5655fe1 100644
> --- a/arch/arm64/include/asm/fpsimd.h
> +++ b/arch/arm64/include/asm/fpsimd.h
> @@ -20,6 +20,8 @@
>
> #ifndef __ASSEMBLY__
>
> +#include <linux/stddef.h>
> +
> /*
> * FP/SIMD storage area has:
> * - FPSR and FPCR
> @@ -72,6 +74,20 @@ extern void sve_load_state(void const *state, u32 const *pfpsr,
> unsigned long vq_minus_1);
> extern unsigned int sve_get_vl(void);
>
> +#ifdef CONFIG_ARM64_SVE
> +
> +extern size_t sve_state_size(struct task_struct const *task);
> +
> +extern void sve_alloc(struct task_struct *task);
> +extern void fpsimd_release_task(struct task_struct *task);
> +
> +#else /* ! CONFIG_ARM64_SVE */
> +
> +static inline void sve_alloc(struct task_struct *task) { }
> +static inline void fpsimd_release_task(struct task_struct *task) { }
> +
> +#endif /* ! CONFIG_ARM64_SVE */
> +
> /* For use by EFI runtime services calls only */
> extern void __efi_fpsimd_begin(void);
> extern void __efi_fpsimd_end(void);
> diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
> index 7dddca2..e2f575d 100644
> --- a/arch/arm64/include/asm/processor.h
> +++ b/arch/arm64/include/asm/processor.h
> @@ -105,6 +105,8 @@ struct thread_struct {
> unsigned long tp2_value;
> #endif
> struct fpsimd_state fpsimd_state;
> + void *sve_state; /* SVE registers, if any */
> + unsigned int sve_vl; /* SVE vector length */
> unsigned long fault_address; /* fault info */
> unsigned long fault_code; /* ESR_EL1 value */
> struct debug_info debug; /* debugging */
> diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
> index ddded64..92b7b48 100644
> --- a/arch/arm64/include/asm/thread_info.h
> +++ b/arch/arm64/include/asm/thread_info.h
> @@ -63,6 +63,8 @@ struct thread_info {
> void arch_setup_new_exec(void);
> #define arch_setup_new_exec arch_setup_new_exec
>
> +void arch_release_task_struct(struct task_struct *tsk);
> +
> #endif
>
> /*
> @@ -92,6 +94,7 @@ void arch_setup_new_exec(void);
> #define TIF_RESTORE_SIGMASK 20
> #define TIF_SINGLESTEP 21
> #define TIF_32BIT 22 /* 32bit process */
> +#define TIF_SVE 23 /* Scalable Vector Extension in use */
>
> #define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
> #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
> @@ -105,6 +108,7 @@ void arch_setup_new_exec(void);
> #define _TIF_UPROBE (1 << TIF_UPROBE)
> #define _TIF_FSCHECK (1 << TIF_FSCHECK)
> #define _TIF_32BIT (1 << TIF_32BIT)
> +#define _TIF_SVE (1 << TIF_SVE)
>
> #define _TIF_WORK_MASK (_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
> _TIF_NOTIFY_RESUME | _TIF_FOREIGN_FPSTATE | \
> diff --git a/arch/arm64/include/asm/traps.h b/arch/arm64/include/asm/traps.h
> index 45e3da3..1696f9d 100644
> --- a/arch/arm64/include/asm/traps.h
> +++ b/arch/arm64/include/asm/traps.h
> @@ -34,6 +34,8 @@ struct undef_hook {
>
> void register_undef_hook(struct undef_hook *hook);
> void unregister_undef_hook(struct undef_hook *hook);
> +void force_signal_inject(int signal, int code, struct pt_regs *regs,
> + unsigned long address);
>
> void arm64_notify_segfault(struct pt_regs *regs, unsigned long addr);
>
> diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
> index f5e851e..56e848f 100644
> --- a/arch/arm64/kernel/entry.S
> +++ b/arch/arm64/kernel/entry.S
> @@ -607,6 +607,8 @@ el0_sync:
> b.eq el0_ia
> cmp x24, #ESR_ELx_EC_FP_ASIMD // FP/ASIMD access
> b.eq el0_fpsimd_acc
> + cmp x24, #ESR_ELx_EC_SVE // SVE access
> + b.eq el0_sve_acc
I'm guessing there is a point that this long chain of cmp instructions
is better handled with a jump table? One for the maintainer though I
guess?
> cmp x24, #ESR_ELx_EC_FP_EXC64 // FP/ASIMD exception
> b.eq el0_fpsimd_exc
> cmp x24, #ESR_ELx_EC_SYS64 // configurable trap
> @@ -658,6 +660,7 @@ el0_svc_compat:
> /*
> * AArch32 syscall handling
> */
> + ldr x16, [tsk, #TSK_TI_FLAGS] // load thread flags
> adrp stbl, compat_sys_call_table // load compat syscall table pointer
> mov wscno, w7 // syscall number in w7 (r7)
> mov wsc_nr, #__NR_compat_syscalls
> @@ -705,9 +708,19 @@ el0_fpsimd_acc:
> mov x1, sp
> bl do_fpsimd_acc
> b ret_to_user
> +el0_sve_acc:
> + /*
> + * Scalable Vector Extension access
> + */
> + enable_dbg_and_irq
> + ct_user_exit
> + mov x0, x25
> + mov x1, sp
> + bl do_sve_acc
> + b ret_to_user
> el0_fpsimd_exc:
> /*
> - * Floating Point or Advanced SIMD exception
> + * Floating Point, Advanced SIMD or SVE exception
> */
> enable_dbg
> ct_user_exit
> @@ -835,16 +848,36 @@ ENDPROC(ret_to_user)
> */
> .align 6
> el0_svc:
> + ldr x16, [tsk, #TSK_TI_FLAGS] // load thread flags
> adrp stbl, sys_call_table // load syscall table pointer
> mov wscno, w8 // syscall number in w8
> mov wsc_nr, #__NR_syscalls
> +
> +#ifndef CONFIG_ARM64_SVE
> + b el0_svc_naked
Hmm we've hoisted the ldr x16, [tsk, #TSK_TI_FLAGS] out of el0_svc_naked
but we'll still be testing the bit when CONFIG_ARM64_SVE isn't enabled?
I'm not clear why you couldn't keep that where it was?
> +#else
> + tbz x16, #TIF_SVE, el0_svc_naked // Skip unless TIF_SVE set:
> + bic x16, x16, #_TIF_SVE // discard SVE state
> + str x16, [tsk, #TSK_TI_FLAGS]
> +
> + /*
> + * task_fpsimd_load() won't be called to update CPACR_EL1 in
> + * ret_to_user unless TIF_FOREIGN_FPSTATE is still set, which only
> + * happens if a context switch or kernel_neon_begin() or context
> + * modification (sigreturn, ptrace) intervenes.
> + * So, ensure that CPACR_EL1 is already correct for the fast-path case:
> + */
> + mrs x9, cpacr_el1
> + bic x9, x9, #CPACR_EL1_ZEN_EL0EN // disable SVE for el0
> + msr cpacr_el1, x9 // synchronised by eret to el0
> +#endif /* CONFIG_ARM64_SVE */
> +
> el0_svc_naked: // compat entry point
> stp x0, xscno, [sp, #S_ORIG_X0] // save the original x0 and syscall number
> enable_dbg_and_irq
> ct_user_exit 1
>
> - ldr x16, [tsk, #TSK_TI_FLAGS] // check for syscall hooks
> - tst x16, #_TIF_SYSCALL_WORK
> + tst x16, #_TIF_SYSCALL_WORK // check for syscall hooks
> b.ne __sys_trace
> cmp wscno, wsc_nr // check upper syscall limit
> b.hs ni_sys
> diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
> index 2baba0d..787f5d3 100644
> --- a/arch/arm64/kernel/fpsimd.c
> +++ b/arch/arm64/kernel/fpsimd.c
> @@ -18,19 +18,27 @@
> */
>
> #include <linux/bottom_half.h>
> +#include <linux/bug.h>
> +#include <linux/compat.h>
> #include <linux/cpu.h>
> #include <linux/cpu_pm.h>
> #include <linux/kernel.h>
> #include <linux/linkage.h>
> +#include <linux/irqflags.h>
> #include <linux/init.h>
> #include <linux/percpu.h>
> #include <linux/preempt.h>
> +#include <linux/ptrace.h>
> #include <linux/sched/signal.h>
> #include <linux/signal.h>
> +#include <linux/slab.h>
>
> #include <asm/fpsimd.h>
> #include <asm/cputype.h>
> #include <asm/simd.h>
> +#include <asm/sigcontext.h>
> +#include <asm/sysreg.h>
> +#include <asm/traps.h>
>
> #define FPEXC_IOF (1 << 0)
> #define FPEXC_DZF (1 << 1)
> @@ -40,6 +48,8 @@
> #define FPEXC_IDF (1 << 7)
>
> /*
> + * (Note: in this discussion, statements about FPSIMD apply equally to SVE.)
> + *
> * In order to reduce the number of times the FPSIMD state is needlessly saved
> * and restored, we need to keep track of two things:
> * (a) for each task, we need to remember which CPU was the last one to have
> @@ -101,6 +111,279 @@
> static DEFINE_PER_CPU(struct fpsimd_state *, fpsimd_last_state);
>
> /*
> + * Call __sve_free() directly only if you know task can't be scheduled
> + * or preempted.
> + */
> +static void __sve_free(struct task_struct *task)
> +{
> + kfree(task->thread.sve_state);
> + task->thread.sve_state = NULL;
> +}
> +
> +static void sve_free(struct task_struct *task)
> +{
> + WARN_ON(test_tsk_thread_flag(task, TIF_SVE));
> +
> + __sve_free(task);
> +}
> +
> +
> +/* Offset of FFR in the SVE register dump */
> +static size_t sve_ffr_offset(int vl)
> +{
> + return SVE_SIG_FFR_OFFSET(sve_vq_from_vl(vl)) - SVE_SIG_REGS_OFFSET;
> +}
> +
> +static void *sve_pffr(struct task_struct *task)
> +{
> + return (char *)task->thread.sve_state +
> + sve_ffr_offset(task->thread.sve_vl);
> +}
> +
> +static void change_cpacr(u64 val, u64 mask)
> +{
> + u64 cpacr = read_sysreg(CPACR_EL1);
> + u64 new = (cpacr & ~mask) | val;
> +
> + if (new != cpacr)
> + write_sysreg(new, CPACR_EL1);
> +}
> +
> +static void sve_user_disable(void)
> +{
> + change_cpacr(0, CPACR_EL1_ZEN_EL0EN);
> +}
> +
> +static void sve_user_enable(void)
> +{
> + change_cpacr(CPACR_EL1_ZEN_EL0EN, CPACR_EL1_ZEN_EL0EN);
> +}
> +
> +/*
> + * TIF_SVE controls whether a task can use SVE without trapping while
> + * in userspace, and also the way a task's FPSIMD/SVE state is stored
> + * in thread_struct.
> + *
> + * The kernel uses this flag to track whether a user task is actively
> + * using SVE, and therefore whether full SVE register state needs to
> + * be tracked. If not, the cheaper FPSIMD context handling code can
> + * be used instead of the more costly SVE equivalents.
> + *
> + * * TIF_SVE set:
> + *
> + * The task can execute SVE instructions while in userspace without
> + * trapping to the kernel.
> + *
> + * When stored, Z0-Z31 (incorporating Vn in bits[127:0] or the
> + * corresponding Zn), P0-P15 and FFR are encoded in in
> + * task->thread.sve_state, formatted appropriately for vector
> + * length task->thread.sve_vl.
> + *
> + * task->thread.sve_state must point to a valid buffer at least
> + * sve_state_size(task) bytes in size.
> + *
> + * During any syscall, the kernel may optionally clear TIF_SVE and
> + * discard the vector state except for the FPSIMD subset.
> + *
> + * * TIF_SVE clear:
> + *
> + * An attempt by the user task to execute an SVE instruction causes
> + * do_sve_acc() to be called, which does some preparation and then
> + * sets TIF_SVE.
> + *
> + * When stored, FPSIMD registers V0-V31 are encoded in
> + * task->fpsimd_state; bits [max : 128] for each of Z0-Z31 are
> + * logically zero but not stored anywhere; P0-P15 and FFR are not
> + * stored and have unspecified values from userspace's point of
> + * view. For hygiene purposes, the kernel zeroes them on next use,
> + * but userspace is discouraged from relying on this.
> + *
> + * task->thread.sve_state does not need to be non-NULL, valid or any
> + * particular size: it must not be dereferenced.
> + *
> + * * FPSR and FPCR are always stored in task->fpsimd_state irrespctive of
> + * whether TIF_SVE is clear or set, since these are not vector length
> + * dependent.
> + */
> +
> +/*
> + * Update current's FPSIMD/SVE registers from thread_struct.
> + *
> + * This function should be called only when the FPSIMD/SVE state in
> + * thread_struct is known to be up to date, when preparing to enter
> + * userspace.
> + *
> + * Softirqs (and preemption) must be disabled.
> + */
> +static void task_fpsimd_load(void)
> +{
> + WARN_ON(!in_softirq() && !irqs_disabled());
> +
> + if (system_supports_sve() && test_thread_flag(TIF_SVE))
> + sve_load_state(sve_pffr(current),
> + ¤t->thread.fpsimd_state.fpsr,
> + sve_vq_from_vl(current->thread.sve_vl) - 1);
> + else
> + fpsimd_load_state(¤t->thread.fpsimd_state);
> +
> + if (system_supports_sve()) {
> + /* Toggle SVE trapping for userspace if needed */
> + if (test_thread_flag(TIF_SVE))
> + sve_user_enable();
> + else
> + sve_user_disable();
> +
> + /* Serialised by exception return to user */
> + }
> +}
> +
> +/*
> + * Ensure current's FPSIMD/SVE storage in thread_struct is up to date
> + * with respect to the CPU registers.
> + *
> + * Softirqs (and preemption) must be disabled.
> + */
> +static void task_fpsimd_save(void)
> +{
> + WARN_ON(!in_softirq() && !irqs_disabled());
> +
> + if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
> + if (system_supports_sve() && test_thread_flag(TIF_SVE)) {
> + if (WARN_ON(sve_get_vl() != current->thread.sve_vl)) {
> + /*
> + * Can't save the user regs, so current would
> + * re-enter user with corrupt state.
> + * There's no way to recover, so kill it:
> + */
> + force_signal_inject(
> + SIGKILL, 0, current_pt_regs(), 0);
> + return;
> + }
> +
> + sve_save_state(sve_pffr(current),
> + ¤t->thread.fpsimd_state.fpsr);
> + } else
> + fpsimd_save_state(¤t->thread.fpsimd_state);
> + }
> +}
> +
> +#define ZREG(sve_state, vq, n) ((char *)(sve_state) + \
> + (SVE_SIG_ZREG_OFFSET(vq, n) - SVE_SIG_REGS_OFFSET))
> +
> +/*
> + * Transfer the FPSIMD state in task->thread.fpsimd_state to
> + * task->thread.sve_state.
> + *
> + * Task can be a non-runnable task, or current. In the latter case,
> + * softirqs (and preemption) must be disabled.
> + * task->thread.sve_state must point to at least sve_state_size(task)
> + * bytes of allocated kernel memory.
> + * task->thread.fpsimd_state must be up to date before calling this function.
> + */
> +static void fpsimd_to_sve(struct task_struct *task)
> +{
> + unsigned int vq;
> + void *sst = task->thread.sve_state;
> + struct fpsimd_state const *fst = &task->thread.fpsimd_state;
> + unsigned int i;
> +
> + if (!system_supports_sve())
> + return;
> +
> + vq = sve_vq_from_vl(task->thread.sve_vl);
> + for (i = 0; i < 32; ++i)
> + memcpy(ZREG(sst, vq, i), &fst->vregs[i],
> + sizeof(fst->vregs[i]));
> +}
> +
> +#ifdef CONFIG_ARM64_SVE
> +
> +/*
> + * Return how many bytes of memory are required to store the full SVE
> + * state for task, given task's currently configured vector length.
> + */
> +size_t sve_state_size(struct task_struct const *task)
> +{
> + return SVE_SIG_REGS_SIZE(sve_vq_from_vl(task->thread.sve_vl));
> +}
> +
> +/*
> + * Ensure that task->thread.sve_state is allocated and sufficiently large.
> + *
> + * This function should be used only in preparation for replacing
> + * task->thread.sve_state with new data. The memory is always zeroed
> + * here to prevent stale data from showing through: this is done in
> + * the interest of testability and predictability: except in the
> + * do_sve_acc() case, there is no ABI requirement to hide stale data
> + * written previously be task.
> + */
> +void sve_alloc(struct task_struct *task)
> +{
> + if (task->thread.sve_state) {
> + memset(task->thread.sve_state, 0, sve_state_size(current));
> + return;
> + }
> +
> + /* This is a small allocation (maximum ~8KB) and Should Not Fail. */
> + task->thread.sve_state =
> + kzalloc(sve_state_size(task), GFP_KERNEL);
> +
> + /*
> + * If future SVE revisions can have larger vectors though,
> + * this may cease to be true:
> + */
> + BUG_ON(!task->thread.sve_state);
> +}
> +
> +/*
> + * Called from the put_task_struct() path, which cannot get here
> + * unless dead_task is really dead and not schedulable.
> + */
> +void fpsimd_release_task(struct task_struct *dead_task)
> +{
> + __sve_free(dead_task);
> +}
> +
> +#endif /* CONFIG_ARM64_SVE */
> +
> +/*
> + * Trapped SVE access
> + *
> + * Storage is allocated for the full SVE state, the current FPSIMD
> + * register contents are migrated across, and TIF_SVE is set so that
> + * the SVE access trap will be disabled the next time this task
> + * reaches ret_to_user.
> + *
> + * TIF_SVE should be clear on entry: otherwise, task_fpsimd_load()
> + * would have disabled the SVE access trap for userspace during
> + * ret_to_user, making an SVE access trap impossible in that case.
> + */
> +asmlinkage void do_sve_acc(unsigned int esr, struct pt_regs *regs)
> +{
> + /* Even if we chose not to use SVE, the hardware could still trap: */
> + if (unlikely(!system_supports_sve()) || WARN_ON(is_compat_task())) {
> + force_signal_inject(SIGILL, ILL_ILLOPC, regs, 0);
> + return;
> + }
> +
> + sve_alloc(current);
> +
> + local_bh_disable();
> +
> + task_fpsimd_save();
> + fpsimd_to_sve(current);
> +
> + /* Force ret_to_user to reload the registers: */
> + fpsimd_flush_task_state(current);
> + set_thread_flag(TIF_FOREIGN_FPSTATE);
> +
> + if (test_and_set_thread_flag(TIF_SVE))
> + WARN_ON(1); /* SVE access shouldn't have trapped */
> +
> + local_bh_enable();
> +}
> +
> +/*
> * Trapped FP/ASIMD access.
> */
> asmlinkage void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs)
> @@ -145,8 +428,8 @@ void fpsimd_thread_switch(struct task_struct *next)
> * the registers is in fact the most recent userland FPSIMD state of
> * 'current'.
> */
> - if (current->mm && !test_thread_flag(TIF_FOREIGN_FPSTATE))
> - fpsimd_save_state(¤t->thread.fpsimd_state);
> + if (current->mm)
> + task_fpsimd_save();
>
> if (next->mm) {
> /*
> @@ -168,6 +451,8 @@ void fpsimd_thread_switch(struct task_struct *next)
>
> void fpsimd_flush_thread(void)
> {
> + int vl;
> +
> if (!system_supports_fpsimd())
> return;
>
> @@ -175,6 +460,30 @@ void fpsimd_flush_thread(void)
>
> memset(¤t->thread.fpsimd_state, 0, sizeof(struct fpsimd_state));
> fpsimd_flush_task_state(current);
> +
> + if (system_supports_sve()) {
> + clear_thread_flag(TIF_SVE);
> + sve_free(current);
> +
> + /*
> + * Reset the task vector length as required.
> + * This is where we ensure that all user tasks have a valid
> + * vector length configured: no kernel task can become a user
> + * task without an exec and hence a call to this function.
> + * If a bug causes this to go wrong, we make some noise and
> + * try to fudge thread.sve_vl to a safe value here.
> + */
> + vl = current->thread.sve_vl;
> +
> + if (vl == 0)
> + vl = SVE_VL_MIN;
> +
> + if (WARN_ON(!sve_vl_valid(vl)))
> + vl = SVE_VL_MIN;
> +
> + current->thread.sve_vl = vl;
> + }
> +
> set_thread_flag(TIF_FOREIGN_FPSTATE);
>
> local_bh_enable();
> @@ -183,6 +492,9 @@ void fpsimd_flush_thread(void)
> /*
> * Save the userland FPSIMD state of 'current' to memory, but only if the state
> * currently held in the registers does in fact belong to 'current'
> + *
> + * Currently, SVE tasks can't exist, so just WARN in that case.
> + * Subsequent patches will add full SVE support here.
> */
> void fpsimd_preserve_current_state(void)
> {
> @@ -194,6 +506,8 @@ void fpsimd_preserve_current_state(void)
> if (!test_thread_flag(TIF_FOREIGN_FPSTATE))
> fpsimd_save_state(¤t->thread.fpsimd_state);
>
> + WARN_ON_ONCE(test_and_clear_thread_flag(TIF_SVE));
> +
> local_bh_enable();
> }
>
> @@ -212,7 +526,7 @@ void fpsimd_restore_current_state(void)
> if (test_and_clear_thread_flag(TIF_FOREIGN_FPSTATE)) {
> struct fpsimd_state *st = ¤t->thread.fpsimd_state;
>
> - fpsimd_load_state(st);
> + task_fpsimd_load();
> __this_cpu_write(fpsimd_last_state, st);
> st->cpu = smp_processor_id();
> }
> @@ -381,8 +695,8 @@ static int fpsimd_cpu_pm_notifier(struct notifier_block *self,
> {
> switch (cmd) {
> case CPU_PM_ENTER:
> - if (current->mm && !test_thread_flag(TIF_FOREIGN_FPSTATE))
> - fpsimd_save_state(¤t->thread.fpsimd_state);
> + if (current->mm)
> + task_fpsimd_save();
> this_cpu_write(fpsimd_last_state, NULL);
> break;
> case CPU_PM_EXIT:
> diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
> index c15ec41..b2adcce 100644
> --- a/arch/arm64/kernel/process.c
> +++ b/arch/arm64/kernel/process.c
> @@ -49,6 +49,7 @@
> #include <linux/notifier.h>
> #include <trace/events/power.h>
> #include <linux/percpu.h>
> +#include <linux/thread_info.h>
>
> #include <asm/alternative.h>
> #include <asm/compat.h>
> @@ -273,11 +274,27 @@ void release_thread(struct task_struct *dead_task)
> {
> }
>
> +void arch_release_task_struct(struct task_struct *tsk)
> +{
> + fpsimd_release_task(tsk);
> +}
> +
> +/*
> + * src and dst may temporarily have aliased sve_state after task_struct
> + * is copied. We cannot fix this properly here, because src may have
> + * live SVE state and dst's thread_info may not exist yet, so tweaking
> + * either src's or dst's TIF_SVE is not safe.
> + *
> + * The unaliasing is done in copy_thread() instead. This works because
> + * dst is not schedulable or traceable until both of these functions
> + * have been called.
> + */
> int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
> {
> if (current->mm)
> fpsimd_preserve_current_state();
> *dst = *src;
> +
> return 0;
> }
>
> @@ -290,6 +307,13 @@ int copy_thread(unsigned long clone_flags, unsigned long stack_start,
>
> memset(&p->thread.cpu_context, 0, sizeof(struct cpu_context));
>
> + /*
> + * Unalias p->thread.sve_state (if any) from the parent task
> + * and disable discard SVE state for p:
> + */
> + clear_tsk_thread_flag(p, TIF_SVE);
> + p->thread.sve_state = NULL;
> +
> if (likely(!(p->flags & PF_KTHREAD))) {
> *childregs = *current_pt_regs();
> childregs->regs[0] = 0;
> diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
> index 18c0290..9d3c7f0 100644
> --- a/arch/arm64/kernel/traps.c
> +++ b/arch/arm64/kernel/traps.c
> @@ -310,8 +310,8 @@ static int call_undef_hook(struct pt_regs *regs)
> return fn ? fn(regs, instr) : 1;
> }
>
> -static void force_signal_inject(int signal, int code, struct pt_regs *regs,
> - unsigned long address)
> +void force_signal_inject(int signal, int code, struct pt_regs *regs,
> + unsigned long address)
> {
> siginfo_t info;
> void __user *pc = (void __user *)instruction_pointer(regs);
> @@ -325,7 +325,7 @@ static void force_signal_inject(int signal, int code, struct pt_regs *regs,
> desc = "illegal memory access";
> break;
> default:
> - desc = "bad mode";
> + desc = "unknown or unrecoverable error";
> break;
> }
Is this a separate trivial clean-up patch? It seems like you should
handle SIGKILL explicitly?
--
Alex Benn?e
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 13/30] arm64/sve: Core task context handling
2017-11-09 17:16 ` Alex Bennée
@ 2017-11-09 17:56 ` Dave Martin
-1 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-11-09 17:56 UTC (permalink / raw)
To: Alex Bennée
Cc: linux-arch, Okamoto Takayuki, libc-alpha, Ard Biesheuvel,
Szabolcs Nagy, Catalin Marinas, Will Deacon, kvmarm,
linux-arm-kernel
On Thu, Nov 09, 2017 at 05:16:40PM +0000, Alex Bennée wrote:
>
> Dave Martin <Dave.Martin@arm.com> writes:
>
> > This patch adds the core support for switching and managing the SVE
> > architectural state of user tasks.
> >
> > Calls to the existing FPSIMD low-level save/restore functions are
> > factored out as new functions task_fpsimd_{save,load}(), since SVE
> > now dynamically may or may not need to be handled at these points
> > depending on the kernel configuration, hardware features discovered
> > at boot, and the runtime state of the task. To make these
> > decisions as fast as possible, const cpucaps are used where
> > feasible, via the system_supports_sve() helper.
> >
> > The SVE registers are only tracked for threads that have explicitly
> > used SVE, indicated by the new thread flag TIF_SVE. Otherwise, the
> > FPSIMD view of the architectural state is stored in
> > thread.fpsimd_state as usual.
> >
> > When in use, the SVE registers are not stored directly in
> > thread_struct due to their potentially large and variable size.
> > Because the task_struct slab allocator must be configured very
> > early during kernel boot, it is also tricky to configure it
> > correctly to match the maximum vector length provided by the
> > hardware, since this depends on examining secondary CPUs as well as
> > the primary. Instead, a pointer sve_state in thread_struct points
> > to a dynamically allocated buffer containing the SVE register data,
> > and code is added to allocate and free this buffer at appropriate
> > times.
> >
> > TIF_SVE is set when taking an SVE access trap from userspace, if
> > suitable hardware support has been detected. This enables SVE for
> > the thread: a subsequent return to userspace will disable the trap
> > accordingly. If such a trap is taken without sufficient system-
> > wide hardware support, SIGILL is sent to the thread instead as if
> > an undefined instruction had been executed: this may happen if
> > userspace tries to use SVE in a system where not all CPUs support
> > it for example.
> >
> > The kernel will clear TIF_SVE and disable SVE for the thread
> > whenever an explicit syscall is made by userspace. For backwards
> > compatibility reasons and conformance with the spirit of the base
> > AArch64 procedure call standard, the subset of the SVE register
> > state that aliases the FPSIMD registers is still preserved across a
> > syscall even if this happens. The remainder of the SVE register
> > state logically becomes zero at syscall entry, though the actual
> > zeroing work is currently deferred until the thread next tries to
> > use SVE, causing another trap to the kernel. This implementation
> > is suboptimal: in the future, the fastpath case may be optimised
> > to zero the registers in-place and leave SVE enabled for the task,
> > where beneficial.
> >
> > TIF_SVE is also cleared in the following slowpath cases, which are
> > taken as reasonable hints that the task may no longer use SVE:
> > * exec
> > * fork and clone
> >
> > Code is added to sync data between thread.fpsimd_state and
> > thread.sve_state whenever enabling/disabling SVE, in a manner
> > consistent with the SVE architectural programmer's model.
> >
> > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> > Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> > Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> > Cc: Alex Bennée <alex.bennee@linaro.org>
> >
> > ---
> >
> > Kept Catalin's Reviewed-by, since this is a trivial change.
> >
> > Changes since v4
> > ----------------
> >
> > Miscellaneous:
> >
> > * Mark do_sve_acc() as asmlinkage.
> >
> > (Semantic correctness only; no functional impact.)
[...]
> > diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
> > index f5e851e..56e848f 100644
> > --- a/arch/arm64/kernel/entry.S
> > +++ b/arch/arm64/kernel/entry.S
> > @@ -607,6 +607,8 @@ el0_sync:
> > b.eq el0_ia
> > cmp x24, #ESR_ELx_EC_FP_ASIMD // FP/ASIMD access
> > b.eq el0_fpsimd_acc
> > + cmp x24, #ESR_ELx_EC_SVE // SVE access
> > + b.eq el0_sve_acc
>
> I'm guessing there is a point that this long chain of cmp instructions
> is better handled with a jump table? One for the maintainer though I
> guess?
Probably it would be worth refactoring this at some point.
There's a tradeoff between the length of this list the extra D-cache
and/or branch miss(es) that might result from using a table.
The optimimum approach would be microarchitecture dependent, but I
suspect a good compromise would be to profile this, pick the few most
common / most latency sensitive exception types and keep those as
compare-and-branch, deferring the remainder to a table lookup.
I had a vague plan to take a look at it, but for this series is
was very much in "nice-to-have" territory.
> > cmp x24, #ESR_ELx_EC_FP_EXC64 // FP/ASIMD exception
> > b.eq el0_fpsimd_exc
> > cmp x24, #ESR_ELx_EC_SYS64 // configurable trap
> > @@ -658,6 +660,7 @@ el0_svc_compat:
> > /*
> > * AArch32 syscall handling
> > */
> > + ldr x16, [tsk, #TSK_TI_FLAGS] // load thread flags
> > adrp stbl, compat_sys_call_table // load compat syscall table pointer
> > mov wscno, w7 // syscall number in w7 (r7)
> > mov wsc_nr, #__NR_compat_syscalls
[...]
> > @@ -835,16 +848,36 @@ ENDPROC(ret_to_user)
> > */
> > .align 6
> > el0_svc:
> > + ldr x16, [tsk, #TSK_TI_FLAGS] // load thread flags
> > adrp stbl, sys_call_table // load syscall table pointer
> > mov wscno, w8 // syscall number in w8
> > mov wsc_nr, #__NR_syscalls
> > +
> > +#ifndef CONFIG_ARM64_SVE
> > + b el0_svc_naked
>
> Hmm we've hoisted the ldr x16, [tsk, #TSK_TI_FLAGS] out of el0_svc_naked
> but we'll still be testing the bit when CONFIG_ARM64_SVE isn't enabled?
Where? In this patch it's #ifdef'd out. In "Detect SVE and activate
runtime support" this is converted to an asm alternative, so this should
reduce to a statically predictable branch when CONFIG_ARM64_SVE=y but
SVE support is not detected.
> I'm not clear why you couldn't keep that where it was?
Catalin wasn't keen on the duplication of work reading and writing the
thread flags, so I moved it to the common path.
>
> > +#else
> > + tbz x16, #TIF_SVE, el0_svc_naked // Skip unless TIF_SVE set:
> > + bic x16, x16, #_TIF_SVE // discard SVE state
> > + str x16, [tsk, #TSK_TI_FLAGS]
> > +
> > + /*
> > + * task_fpsimd_load() won't be called to update CPACR_EL1 in
> > + * ret_to_user unless TIF_FOREIGN_FPSTATE is still set, which only
> > + * happens if a context switch or kernel_neon_begin() or context
> > + * modification (sigreturn, ptrace) intervenes.
> > + * So, ensure that CPACR_EL1 is already correct for the fast-path case:
> > + */
> > + mrs x9, cpacr_el1
> > + bic x9, x9, #CPACR_EL1_ZEN_EL0EN // disable SVE for el0
> > + msr cpacr_el1, x9 // synchronised by eret to el0
> > +#endif /* CONFIG_ARM64_SVE */
> > +
> > el0_svc_naked: // compat entry point
> > stp x0, xscno, [sp, #S_ORIG_X0] // save the original x0 and syscall number
> > enable_dbg_and_irq
> > ct_user_exit 1
> >
> > - ldr x16, [tsk, #TSK_TI_FLAGS] // check for syscall hooks
> > - tst x16, #_TIF_SYSCALL_WORK
> > + tst x16, #_TIF_SYSCALL_WORK // check for syscall hooks
> > b.ne __sys_trace
> > cmp wscno, wsc_nr // check upper syscall limit
> > b.hs ni_sys
[...]
> > diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
> > index 18c0290..9d3c7f0 100644
> > --- a/arch/arm64/kernel/traps.c
> > +++ b/arch/arm64/kernel/traps.c
> > @@ -310,8 +310,8 @@ static int call_undef_hook(struct pt_regs *regs)
> > return fn ? fn(regs, instr) : 1;
> > }
> >
> > -static void force_signal_inject(int signal, int code, struct pt_regs *regs,
> > - unsigned long address)
> > +void force_signal_inject(int signal, int code, struct pt_regs *regs,
> > + unsigned long address)
> > {
> > siginfo_t info;
> > void __user *pc = (void __user *)instruction_pointer(regs);
> > @@ -325,7 +325,7 @@ static void force_signal_inject(int signal, int code, struct pt_regs *regs,
> > desc = "illegal memory access";
> > break;
> > default:
> > - desc = "bad mode";
> > + desc = "unknown or unrecoverable error";
> > break;
> > }
>
> Is this a separate trivial clean-up patch? It seems like you should
> handle SIGKILL explicitly?
I considered it part of this patch, since this function is not currently
used elsewhere.
I only expect this path to be followed as a catch-all for BUG() like
conditions that can be contained by killing the user task. Printing
out a super-descriptive message didn't seem appropriate, but "bad mode"
is especially opaque. I think that was a paste from arch/arm -- AArch64
doesn't have "modes" as such.
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 13/30] arm64/sve: Core task context handling
@ 2017-11-09 17:56 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-11-09 17:56 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Nov 09, 2017 at 05:16:40PM +0000, Alex Benn?e wrote:
>
> Dave Martin <Dave.Martin@arm.com> writes:
>
> > This patch adds the core support for switching and managing the SVE
> > architectural state of user tasks.
> >
> > Calls to the existing FPSIMD low-level save/restore functions are
> > factored out as new functions task_fpsimd_{save,load}(), since SVE
> > now dynamically may or may not need to be handled at these points
> > depending on the kernel configuration, hardware features discovered
> > at boot, and the runtime state of the task. To make these
> > decisions as fast as possible, const cpucaps are used where
> > feasible, via the system_supports_sve() helper.
> >
> > The SVE registers are only tracked for threads that have explicitly
> > used SVE, indicated by the new thread flag TIF_SVE. Otherwise, the
> > FPSIMD view of the architectural state is stored in
> > thread.fpsimd_state as usual.
> >
> > When in use, the SVE registers are not stored directly in
> > thread_struct due to their potentially large and variable size.
> > Because the task_struct slab allocator must be configured very
> > early during kernel boot, it is also tricky to configure it
> > correctly to match the maximum vector length provided by the
> > hardware, since this depends on examining secondary CPUs as well as
> > the primary. Instead, a pointer sve_state in thread_struct points
> > to a dynamically allocated buffer containing the SVE register data,
> > and code is added to allocate and free this buffer at appropriate
> > times.
> >
> > TIF_SVE is set when taking an SVE access trap from userspace, if
> > suitable hardware support has been detected. This enables SVE for
> > the thread: a subsequent return to userspace will disable the trap
> > accordingly. If such a trap is taken without sufficient system-
> > wide hardware support, SIGILL is sent to the thread instead as if
> > an undefined instruction had been executed: this may happen if
> > userspace tries to use SVE in a system where not all CPUs support
> > it for example.
> >
> > The kernel will clear TIF_SVE and disable SVE for the thread
> > whenever an explicit syscall is made by userspace. For backwards
> > compatibility reasons and conformance with the spirit of the base
> > AArch64 procedure call standard, the subset of the SVE register
> > state that aliases the FPSIMD registers is still preserved across a
> > syscall even if this happens. The remainder of the SVE register
> > state logically becomes zero at syscall entry, though the actual
> > zeroing work is currently deferred until the thread next tries to
> > use SVE, causing another trap to the kernel. This implementation
> > is suboptimal: in the future, the fastpath case may be optimised
> > to zero the registers in-place and leave SVE enabled for the task,
> > where beneficial.
> >
> > TIF_SVE is also cleared in the following slowpath cases, which are
> > taken as reasonable hints that the task may no longer use SVE:
> > * exec
> > * fork and clone
> >
> > Code is added to sync data between thread.fpsimd_state and
> > thread.sve_state whenever enabling/disabling SVE, in a manner
> > consistent with the SVE architectural programmer's model.
> >
> > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> > Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> > Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> > Cc: Alex Benn?e <alex.bennee@linaro.org>
> >
> > ---
> >
> > Kept Catalin's Reviewed-by, since this is a trivial change.
> >
> > Changes since v4
> > ----------------
> >
> > Miscellaneous:
> >
> > * Mark do_sve_acc() as asmlinkage.
> >
> > (Semantic correctness only; no functional impact.)
[...]
> > diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
> > index f5e851e..56e848f 100644
> > --- a/arch/arm64/kernel/entry.S
> > +++ b/arch/arm64/kernel/entry.S
> > @@ -607,6 +607,8 @@ el0_sync:
> > b.eq el0_ia
> > cmp x24, #ESR_ELx_EC_FP_ASIMD // FP/ASIMD access
> > b.eq el0_fpsimd_acc
> > + cmp x24, #ESR_ELx_EC_SVE // SVE access
> > + b.eq el0_sve_acc
>
> I'm guessing there is a point that this long chain of cmp instructions
> is better handled with a jump table? One for the maintainer though I
> guess?
Probably it would be worth refactoring this at some point.
There's a tradeoff between the length of this list the extra D-cache
and/or branch miss(es) that might result from using a table.
The optimimum approach would be microarchitecture dependent, but I
suspect a good compromise would be to profile this, pick the few most
common / most latency sensitive exception types and keep those as
compare-and-branch, deferring the remainder to a table lookup.
I had a vague plan to take a look at it, but for this series is
was very much in "nice-to-have" territory.
> > cmp x24, #ESR_ELx_EC_FP_EXC64 // FP/ASIMD exception
> > b.eq el0_fpsimd_exc
> > cmp x24, #ESR_ELx_EC_SYS64 // configurable trap
> > @@ -658,6 +660,7 @@ el0_svc_compat:
> > /*
> > * AArch32 syscall handling
> > */
> > + ldr x16, [tsk, #TSK_TI_FLAGS] // load thread flags
> > adrp stbl, compat_sys_call_table // load compat syscall table pointer
> > mov wscno, w7 // syscall number in w7 (r7)
> > mov wsc_nr, #__NR_compat_syscalls
[...]
> > @@ -835,16 +848,36 @@ ENDPROC(ret_to_user)
> > */
> > .align 6
> > el0_svc:
> > + ldr x16, [tsk, #TSK_TI_FLAGS] // load thread flags
> > adrp stbl, sys_call_table // load syscall table pointer
> > mov wscno, w8 // syscall number in w8
> > mov wsc_nr, #__NR_syscalls
> > +
> > +#ifndef CONFIG_ARM64_SVE
> > + b el0_svc_naked
>
> Hmm we've hoisted the ldr x16, [tsk, #TSK_TI_FLAGS] out of el0_svc_naked
> but we'll still be testing the bit when CONFIG_ARM64_SVE isn't enabled?
Where? In this patch it's #ifdef'd out. In "Detect SVE and activate
runtime support" this is converted to an asm alternative, so this should
reduce to a statically predictable branch when CONFIG_ARM64_SVE=y but
SVE support is not detected.
> I'm not clear why you couldn't keep that where it was?
Catalin wasn't keen on the duplication of work reading and writing the
thread flags, so I moved it to the common path.
>
> > +#else
> > + tbz x16, #TIF_SVE, el0_svc_naked // Skip unless TIF_SVE set:
> > + bic x16, x16, #_TIF_SVE // discard SVE state
> > + str x16, [tsk, #TSK_TI_FLAGS]
> > +
> > + /*
> > + * task_fpsimd_load() won't be called to update CPACR_EL1 in
> > + * ret_to_user unless TIF_FOREIGN_FPSTATE is still set, which only
> > + * happens if a context switch or kernel_neon_begin() or context
> > + * modification (sigreturn, ptrace) intervenes.
> > + * So, ensure that CPACR_EL1 is already correct for the fast-path case:
> > + */
> > + mrs x9, cpacr_el1
> > + bic x9, x9, #CPACR_EL1_ZEN_EL0EN // disable SVE for el0
> > + msr cpacr_el1, x9 // synchronised by eret to el0
> > +#endif /* CONFIG_ARM64_SVE */
> > +
> > el0_svc_naked: // compat entry point
> > stp x0, xscno, [sp, #S_ORIG_X0] // save the original x0 and syscall number
> > enable_dbg_and_irq
> > ct_user_exit 1
> >
> > - ldr x16, [tsk, #TSK_TI_FLAGS] // check for syscall hooks
> > - tst x16, #_TIF_SYSCALL_WORK
> > + tst x16, #_TIF_SYSCALL_WORK // check for syscall hooks
> > b.ne __sys_trace
> > cmp wscno, wsc_nr // check upper syscall limit
> > b.hs ni_sys
[...]
> > diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
> > index 18c0290..9d3c7f0 100644
> > --- a/arch/arm64/kernel/traps.c
> > +++ b/arch/arm64/kernel/traps.c
> > @@ -310,8 +310,8 @@ static int call_undef_hook(struct pt_regs *regs)
> > return fn ? fn(regs, instr) : 1;
> > }
> >
> > -static void force_signal_inject(int signal, int code, struct pt_regs *regs,
> > - unsigned long address)
> > +void force_signal_inject(int signal, int code, struct pt_regs *regs,
> > + unsigned long address)
> > {
> > siginfo_t info;
> > void __user *pc = (void __user *)instruction_pointer(regs);
> > @@ -325,7 +325,7 @@ static void force_signal_inject(int signal, int code, struct pt_regs *regs,
> > desc = "illegal memory access";
> > break;
> > default:
> > - desc = "bad mode";
> > + desc = "unknown or unrecoverable error";
> > break;
> > }
>
> Is this a separate trivial clean-up patch? It seems like you should
> handle SIGKILL explicitly?
I considered it part of this patch, since this function is not currently
used elsewhere.
I only expect this path to be followed as a catch-all for BUG() like
conditions that can be contained by killing the user task. Printing
out a super-descriptive message didn't seem appropriate, but "bad mode"
is especially opaque. I think that was a paste from arch/arm -- AArch64
doesn't have "modes" as such.
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 13/30] arm64/sve: Core task context handling
@ 2017-11-09 18:06 ` Alex Bennée
0 siblings, 0 replies; 174+ messages in thread
From: Alex Bennée @ 2017-11-09 18:06 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arch, Okamoto Takayuki, libc-alpha, Ard Biesheuvel,
Szabolcs Nagy, Catalin Marinas, Will Deacon, kvmarm,
linux-arm-kernel
Dave Martin <Dave.Martin@arm.com> writes:
> On Thu, Nov 09, 2017 at 05:16:40PM +0000, Alex Bennée wrote:
>>
>> Dave Martin <Dave.Martin@arm.com> writes:
>>
>> > This patch adds the core support for switching and managing the SVE
>> > architectural state of user tasks.
>> >
>> > Calls to the existing FPSIMD low-level save/restore functions are
>> > factored out as new functions task_fpsimd_{save,load}(), since SVE
>> > now dynamically may or may not need to be handled at these points
>> > depending on the kernel configuration, hardware features discovered
>> > at boot, and the runtime state of the task. To make these
>> > decisions as fast as possible, const cpucaps are used where
>> > feasible, via the system_supports_sve() helper.
>> >
>> > The SVE registers are only tracked for threads that have explicitly
>> > used SVE, indicated by the new thread flag TIF_SVE. Otherwise, the
>> > FPSIMD view of the architectural state is stored in
>> > thread.fpsimd_state as usual.
>> >
>> > When in use, the SVE registers are not stored directly in
>> > thread_struct due to their potentially large and variable size.
>> > Because the task_struct slab allocator must be configured very
>> > early during kernel boot, it is also tricky to configure it
>> > correctly to match the maximum vector length provided by the
>> > hardware, since this depends on examining secondary CPUs as well as
>> > the primary. Instead, a pointer sve_state in thread_struct points
>> > to a dynamically allocated buffer containing the SVE register data,
>> > and code is added to allocate and free this buffer at appropriate
>> > times.
>> >
>> > TIF_SVE is set when taking an SVE access trap from userspace, if
>> > suitable hardware support has been detected. This enables SVE for
>> > the thread: a subsequent return to userspace will disable the trap
>> > accordingly. If such a trap is taken without sufficient system-
>> > wide hardware support, SIGILL is sent to the thread instead as if
>> > an undefined instruction had been executed: this may happen if
>> > userspace tries to use SVE in a system where not all CPUs support
>> > it for example.
>> >
>> > The kernel will clear TIF_SVE and disable SVE for the thread
>> > whenever an explicit syscall is made by userspace. For backwards
>> > compatibility reasons and conformance with the spirit of the base
>> > AArch64 procedure call standard, the subset of the SVE register
>> > state that aliases the FPSIMD registers is still preserved across a
>> > syscall even if this happens. The remainder of the SVE register
>> > state logically becomes zero at syscall entry, though the actual
>> > zeroing work is currently deferred until the thread next tries to
>> > use SVE, causing another trap to the kernel. This implementation
>> > is suboptimal: in the future, the fastpath case may be optimised
>> > to zero the registers in-place and leave SVE enabled for the task,
>> > where beneficial.
>> >
>> > TIF_SVE is also cleared in the following slowpath cases, which are
>> > taken as reasonable hints that the task may no longer use SVE:
>> > * exec
>> > * fork and clone
>> >
>> > Code is added to sync data between thread.fpsimd_state and
>> > thread.sve_state whenever enabling/disabling SVE, in a manner
>> > consistent with the SVE architectural programmer's model.
>> >
>> > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
>> > Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
>> > Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
>> > Cc: Alex Bennée <alex.bennee@linaro.org>
>> >
>> > ---
>> >
>> > Kept Catalin's Reviewed-by, since this is a trivial change.
>> >
>> > Changes since v4
>> > ----------------
>> >
>> > Miscellaneous:
>> >
>> > * Mark do_sve_acc() as asmlinkage.
>> >
>> > (Semantic correctness only; no functional impact.)
>
> [...]
>
>> > diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
>> > index f5e851e..56e848f 100644
>> > --- a/arch/arm64/kernel/entry.S
>> > +++ b/arch/arm64/kernel/entry.S
>> > @@ -607,6 +607,8 @@ el0_sync:
>> > b.eq el0_ia
>> > cmp x24, #ESR_ELx_EC_FP_ASIMD // FP/ASIMD access
>> > b.eq el0_fpsimd_acc
>> > + cmp x24, #ESR_ELx_EC_SVE // SVE access
>> > + b.eq el0_sve_acc
>>
>> I'm guessing there is a point that this long chain of cmp instructions
>> is better handled with a jump table? One for the maintainer though I
>> guess?
>
> Probably it would be worth refactoring this at some point.
>
> There's a tradeoff between the length of this list the extra D-cache
> and/or branch miss(es) that might result from using a table.
>
> The optimimum approach would be microarchitecture dependent, but I
> suspect a good compromise would be to profile this, pick the few most
> common / most latency sensitive exception types and keep those as
> compare-and-branch, deferring the remainder to a table lookup.
>
> I had a vague plan to take a look at it, but for this series is
> was very much in "nice-to-have" territory.
>
>> > cmp x24, #ESR_ELx_EC_FP_EXC64 // FP/ASIMD exception
>> > b.eq el0_fpsimd_exc
>> > cmp x24, #ESR_ELx_EC_SYS64 // configurable trap
>> > @@ -658,6 +660,7 @@ el0_svc_compat:
>> > /*
>> > * AArch32 syscall handling
>> > */
>> > + ldr x16, [tsk, #TSK_TI_FLAGS] // load thread flags
>> > adrp stbl, compat_sys_call_table // load compat syscall table pointer
>> > mov wscno, w7 // syscall number in w7 (r7)
>> > mov wsc_nr, #__NR_compat_syscalls
>
> [...]
>
>> > @@ -835,16 +848,36 @@ ENDPROC(ret_to_user)
>> > */
>> > .align 6
>> > el0_svc:
>> > + ldr x16, [tsk, #TSK_TI_FLAGS] // load thread flags
>> > adrp stbl, sys_call_table // load syscall table pointer
>> > mov wscno, w8 // syscall number in w8
>> > mov wsc_nr, #__NR_syscalls
>> > +
>> > +#ifndef CONFIG_ARM64_SVE
>> > + b el0_svc_naked
>>
>> Hmm we've hoisted the ldr x16, [tsk, #TSK_TI_FLAGS] out of el0_svc_naked
>> but we'll still be testing the bit when CONFIG_ARM64_SVE isn't enabled?
>
> Where? In this patch it's #ifdef'd out. In "Detect SVE and activate
> runtime support" this is converted to an asm alternative, so this should
> reduce to a statically predictable branch when CONFIG_ARM64_SVE=y but
> SVE support is not detected.
>
>> I'm not clear why you couldn't keep that where it was?
>
> Catalin wasn't keen on the duplication of work reading and writing the
> thread flags, so I moved it to the common path.
Ahh sorry, I see it now.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
>
>>
>> > +#else
>> > + tbz x16, #TIF_SVE, el0_svc_naked // Skip unless TIF_SVE set:
>> > + bic x16, x16, #_TIF_SVE // discard SVE state
>> > + str x16, [tsk, #TSK_TI_FLAGS]
>> > +
>> > + /*
>> > + * task_fpsimd_load() won't be called to update CPACR_EL1 in
>> > + * ret_to_user unless TIF_FOREIGN_FPSTATE is still set, which only
>> > + * happens if a context switch or kernel_neon_begin() or context
>> > + * modification (sigreturn, ptrace) intervenes.
>> > + * So, ensure that CPACR_EL1 is already correct for the fast-path case:
>> > + */
>> > + mrs x9, cpacr_el1
>> > + bic x9, x9, #CPACR_EL1_ZEN_EL0EN // disable SVE for el0
>> > + msr cpacr_el1, x9 // synchronised by eret to el0
>> > +#endif /* CONFIG_ARM64_SVE */
>> > +
>> > el0_svc_naked: // compat entry point
>> > stp x0, xscno, [sp, #S_ORIG_X0] // save the original x0 and syscall number
>> > enable_dbg_and_irq
>> > ct_user_exit 1
>> >
>> > - ldr x16, [tsk, #TSK_TI_FLAGS] // check for syscall hooks
>> > - tst x16, #_TIF_SYSCALL_WORK
>> > + tst x16, #_TIF_SYSCALL_WORK // check for syscall hooks
>> > b.ne __sys_trace
>> > cmp wscno, wsc_nr // check upper syscall limit
>> > b.hs ni_sys
>
> [...]
>
>> > diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
>> > index 18c0290..9d3c7f0 100644
>> > --- a/arch/arm64/kernel/traps.c
>> > +++ b/arch/arm64/kernel/traps.c
>> > @@ -310,8 +310,8 @@ static int call_undef_hook(struct pt_regs *regs)
>> > return fn ? fn(regs, instr) : 1;
>> > }
>> >
>> > -static void force_signal_inject(int signal, int code, struct pt_regs *regs,
>> > - unsigned long address)
>> > +void force_signal_inject(int signal, int code, struct pt_regs *regs,
>> > + unsigned long address)
>> > {
>> > siginfo_t info;
>> > void __user *pc = (void __user *)instruction_pointer(regs);
>> > @@ -325,7 +325,7 @@ static void force_signal_inject(int signal, int code, struct pt_regs *regs,
>> > desc = "illegal memory access";
>> > break;
>> > default:
>> > - desc = "bad mode";
>> > + desc = "unknown or unrecoverable error";
>> > break;
>> > }
>>
>> Is this a separate trivial clean-up patch? It seems like you should
>> handle SIGKILL explicitly?
>
> I considered it part of this patch, since this function is not currently
> used elsewhere.
>
> I only expect this path to be followed as a catch-all for BUG() like
> conditions that can be contained by killing the user task. Printing
> out a super-descriptive message didn't seem appropriate, but "bad mode"
> is especially opaque. I think that was a paste from arch/arm -- AArch64
> doesn't have "modes" as such.
>
> Cheers
> ---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 13/30] arm64/sve: Core task context handling
@ 2017-11-09 18:06 ` Alex Bennée
0 siblings, 0 replies; 174+ messages in thread
From: Alex Bennée @ 2017-11-09 18:06 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arch, Okamoto Takayuki, libc-alpha, Ard Biesheuvel,
Szabolcs Nagy, Catalin Marinas, Will Deacon, kvmarm,
linux-arm-kernel
Dave Martin <Dave.Martin@arm.com> writes:
> On Thu, Nov 09, 2017 at 05:16:40PM +0000, Alex Bennée wrote:
>>
>> Dave Martin <Dave.Martin@arm.com> writes:
>>
>> > This patch adds the core support for switching and managing the SVE
>> > architectural state of user tasks.
>> >
>> > Calls to the existing FPSIMD low-level save/restore functions are
>> > factored out as new functions task_fpsimd_{save,load}(), since SVE
>> > now dynamically may or may not need to be handled at these points
>> > depending on the kernel configuration, hardware features discovered
>> > at boot, and the runtime state of the task. To make these
>> > decisions as fast as possible, const cpucaps are used where
>> > feasible, via the system_supports_sve() helper.
>> >
>> > The SVE registers are only tracked for threads that have explicitly
>> > used SVE, indicated by the new thread flag TIF_SVE. Otherwise, the
>> > FPSIMD view of the architectural state is stored in
>> > thread.fpsimd_state as usual.
>> >
>> > When in use, the SVE registers are not stored directly in
>> > thread_struct due to their potentially large and variable size.
>> > Because the task_struct slab allocator must be configured very
>> > early during kernel boot, it is also tricky to configure it
>> > correctly to match the maximum vector length provided by the
>> > hardware, since this depends on examining secondary CPUs as well as
>> > the primary. Instead, a pointer sve_state in thread_struct points
>> > to a dynamically allocated buffer containing the SVE register data,
>> > and code is added to allocate and free this buffer at appropriate
>> > times.
>> >
>> > TIF_SVE is set when taking an SVE access trap from userspace, if
>> > suitable hardware support has been detected. This enables SVE for
>> > the thread: a subsequent return to userspace will disable the trap
>> > accordingly. If such a trap is taken without sufficient system-
>> > wide hardware support, SIGILL is sent to the thread instead as if
>> > an undefined instruction had been executed: this may happen if
>> > userspace tries to use SVE in a system where not all CPUs support
>> > it for example.
>> >
>> > The kernel will clear TIF_SVE and disable SVE for the thread
>> > whenever an explicit syscall is made by userspace. For backwards
>> > compatibility reasons and conformance with the spirit of the base
>> > AArch64 procedure call standard, the subset of the SVE register
>> > state that aliases the FPSIMD registers is still preserved across a
>> > syscall even if this happens. The remainder of the SVE register
>> > state logically becomes zero at syscall entry, though the actual
>> > zeroing work is currently deferred until the thread next tries to
>> > use SVE, causing another trap to the kernel. This implementation
>> > is suboptimal: in the future, the fastpath case may be optimised
>> > to zero the registers in-place and leave SVE enabled for the task,
>> > where beneficial.
>> >
>> > TIF_SVE is also cleared in the following slowpath cases, which are
>> > taken as reasonable hints that the task may no longer use SVE:
>> > * exec
>> > * fork and clone
>> >
>> > Code is added to sync data between thread.fpsimd_state and
>> > thread.sve_state whenever enabling/disabling SVE, in a manner
>> > consistent with the SVE architectural programmer's model.
>> >
>> > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
>> > Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
>> > Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
>> > Cc: Alex Bennée <alex.bennee@linaro.org>
>> >
>> > ---
>> >
>> > Kept Catalin's Reviewed-by, since this is a trivial change.
>> >
>> > Changes since v4
>> > ----------------
>> >
>> > Miscellaneous:
>> >
>> > * Mark do_sve_acc() as asmlinkage.
>> >
>> > (Semantic correctness only; no functional impact.)
>
> [...]
>
>> > diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
>> > index f5e851e..56e848f 100644
>> > --- a/arch/arm64/kernel/entry.S
>> > +++ b/arch/arm64/kernel/entry.S
>> > @@ -607,6 +607,8 @@ el0_sync:
>> > b.eq el0_ia
>> > cmp x24, #ESR_ELx_EC_FP_ASIMD // FP/ASIMD access
>> > b.eq el0_fpsimd_acc
>> > + cmp x24, #ESR_ELx_EC_SVE // SVE access
>> > + b.eq el0_sve_acc
>>
>> I'm guessing there is a point that this long chain of cmp instructions
>> is better handled with a jump table? One for the maintainer though I
>> guess?
>
> Probably it would be worth refactoring this at some point.
>
> There's a tradeoff between the length of this list the extra D-cache
> and/or branch miss(es) that might result from using a table.
>
> The optimimum approach would be microarchitecture dependent, but I
> suspect a good compromise would be to profile this, pick the few most
> common / most latency sensitive exception types and keep those as
> compare-and-branch, deferring the remainder to a table lookup.
>
> I had a vague plan to take a look at it, but for this series is
> was very much in "nice-to-have" territory.
>
>> > cmp x24, #ESR_ELx_EC_FP_EXC64 // FP/ASIMD exception
>> > b.eq el0_fpsimd_exc
>> > cmp x24, #ESR_ELx_EC_SYS64 // configurable trap
>> > @@ -658,6 +660,7 @@ el0_svc_compat:
>> > /*
>> > * AArch32 syscall handling
>> > */
>> > + ldr x16, [tsk, #TSK_TI_FLAGS] // load thread flags
>> > adrp stbl, compat_sys_call_table // load compat syscall table pointer
>> > mov wscno, w7 // syscall number in w7 (r7)
>> > mov wsc_nr, #__NR_compat_syscalls
>
> [...]
>
>> > @@ -835,16 +848,36 @@ ENDPROC(ret_to_user)
>> > */
>> > .align 6
>> > el0_svc:
>> > + ldr x16, [tsk, #TSK_TI_FLAGS] // load thread flags
>> > adrp stbl, sys_call_table // load syscall table pointer
>> > mov wscno, w8 // syscall number in w8
>> > mov wsc_nr, #__NR_syscalls
>> > +
>> > +#ifndef CONFIG_ARM64_SVE
>> > + b el0_svc_naked
>>
>> Hmm we've hoisted the ldr x16, [tsk, #TSK_TI_FLAGS] out of el0_svc_naked
>> but we'll still be testing the bit when CONFIG_ARM64_SVE isn't enabled?
>
> Where? In this patch it's #ifdef'd out. In "Detect SVE and activate
> runtime support" this is converted to an asm alternative, so this should
> reduce to a statically predictable branch when CONFIG_ARM64_SVE=y but
> SVE support is not detected.
>
>> I'm not clear why you couldn't keep that where it was?
>
> Catalin wasn't keen on the duplication of work reading and writing the
> thread flags, so I moved it to the common path.
Ahh sorry, I see it now.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
>
>>
>> > +#else
>> > + tbz x16, #TIF_SVE, el0_svc_naked // Skip unless TIF_SVE set:
>> > + bic x16, x16, #_TIF_SVE // discard SVE state
>> > + str x16, [tsk, #TSK_TI_FLAGS]
>> > +
>> > + /*
>> > + * task_fpsimd_load() won't be called to update CPACR_EL1 in
>> > + * ret_to_user unless TIF_FOREIGN_FPSTATE is still set, which only
>> > + * happens if a context switch or kernel_neon_begin() or context
>> > + * modification (sigreturn, ptrace) intervenes.
>> > + * So, ensure that CPACR_EL1 is already correct for the fast-path case:
>> > + */
>> > + mrs x9, cpacr_el1
>> > + bic x9, x9, #CPACR_EL1_ZEN_EL0EN // disable SVE for el0
>> > + msr cpacr_el1, x9 // synchronised by eret to el0
>> > +#endif /* CONFIG_ARM64_SVE */
>> > +
>> > el0_svc_naked: // compat entry point
>> > stp x0, xscno, [sp, #S_ORIG_X0] // save the original x0 and syscall number
>> > enable_dbg_and_irq
>> > ct_user_exit 1
>> >
>> > - ldr x16, [tsk, #TSK_TI_FLAGS] // check for syscall hooks
>> > - tst x16, #_TIF_SYSCALL_WORK
>> > + tst x16, #_TIF_SYSCALL_WORK // check for syscall hooks
>> > b.ne __sys_trace
>> > cmp wscno, wsc_nr // check upper syscall limit
>> > b.hs ni_sys
>
> [...]
>
>> > diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
>> > index 18c0290..9d3c7f0 100644
>> > --- a/arch/arm64/kernel/traps.c
>> > +++ b/arch/arm64/kernel/traps.c
>> > @@ -310,8 +310,8 @@ static int call_undef_hook(struct pt_regs *regs)
>> > return fn ? fn(regs, instr) : 1;
>> > }
>> >
>> > -static void force_signal_inject(int signal, int code, struct pt_regs *regs,
>> > - unsigned long address)
>> > +void force_signal_inject(int signal, int code, struct pt_regs *regs,
>> > + unsigned long address)
>> > {
>> > siginfo_t info;
>> > void __user *pc = (void __user *)instruction_pointer(regs);
>> > @@ -325,7 +325,7 @@ static void force_signal_inject(int signal, int code, struct pt_regs *regs,
>> > desc = "illegal memory access";
>> > break;
>> > default:
>> > - desc = "bad mode";
>> > + desc = "unknown or unrecoverable error";
>> > break;
>> > }
>>
>> Is this a separate trivial clean-up patch? It seems like you should
>> handle SIGKILL explicitly?
>
> I considered it part of this patch, since this function is not currently
> used elsewhere.
>
> I only expect this path to be followed as a catch-all for BUG() like
> conditions that can be contained by killing the user task. Printing
> out a super-descriptive message didn't seem appropriate, but "bad mode"
> is especially opaque. I think that was a paste from arch/arm -- AArch64
> doesn't have "modes" as such.
>
> Cheers
> ---Dave
--
Alex Bennée
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 13/30] arm64/sve: Core task context handling
@ 2017-11-09 18:06 ` Alex Bennée
0 siblings, 0 replies; 174+ messages in thread
From: Alex Bennée @ 2017-11-09 18:06 UTC (permalink / raw)
To: linux-arm-kernel
Dave Martin <Dave.Martin@arm.com> writes:
> On Thu, Nov 09, 2017 at 05:16:40PM +0000, Alex Benn?e wrote:
>>
>> Dave Martin <Dave.Martin@arm.com> writes:
>>
>> > This patch adds the core support for switching and managing the SVE
>> > architectural state of user tasks.
>> >
>> > Calls to the existing FPSIMD low-level save/restore functions are
>> > factored out as new functions task_fpsimd_{save,load}(), since SVE
>> > now dynamically may or may not need to be handled at these points
>> > depending on the kernel configuration, hardware features discovered
>> > at boot, and the runtime state of the task. To make these
>> > decisions as fast as possible, const cpucaps are used where
>> > feasible, via the system_supports_sve() helper.
>> >
>> > The SVE registers are only tracked for threads that have explicitly
>> > used SVE, indicated by the new thread flag TIF_SVE. Otherwise, the
>> > FPSIMD view of the architectural state is stored in
>> > thread.fpsimd_state as usual.
>> >
>> > When in use, the SVE registers are not stored directly in
>> > thread_struct due to their potentially large and variable size.
>> > Because the task_struct slab allocator must be configured very
>> > early during kernel boot, it is also tricky to configure it
>> > correctly to match the maximum vector length provided by the
>> > hardware, since this depends on examining secondary CPUs as well as
>> > the primary. Instead, a pointer sve_state in thread_struct points
>> > to a dynamically allocated buffer containing the SVE register data,
>> > and code is added to allocate and free this buffer at appropriate
>> > times.
>> >
>> > TIF_SVE is set when taking an SVE access trap from userspace, if
>> > suitable hardware support has been detected. This enables SVE for
>> > the thread: a subsequent return to userspace will disable the trap
>> > accordingly. If such a trap is taken without sufficient system-
>> > wide hardware support, SIGILL is sent to the thread instead as if
>> > an undefined instruction had been executed: this may happen if
>> > userspace tries to use SVE in a system where not all CPUs support
>> > it for example.
>> >
>> > The kernel will clear TIF_SVE and disable SVE for the thread
>> > whenever an explicit syscall is made by userspace. For backwards
>> > compatibility reasons and conformance with the spirit of the base
>> > AArch64 procedure call standard, the subset of the SVE register
>> > state that aliases the FPSIMD registers is still preserved across a
>> > syscall even if this happens. The remainder of the SVE register
>> > state logically becomes zero at syscall entry, though the actual
>> > zeroing work is currently deferred until the thread next tries to
>> > use SVE, causing another trap to the kernel. This implementation
>> > is suboptimal: in the future, the fastpath case may be optimised
>> > to zero the registers in-place and leave SVE enabled for the task,
>> > where beneficial.
>> >
>> > TIF_SVE is also cleared in the following slowpath cases, which are
>> > taken as reasonable hints that the task may no longer use SVE:
>> > * exec
>> > * fork and clone
>> >
>> > Code is added to sync data between thread.fpsimd_state and
>> > thread.sve_state whenever enabling/disabling SVE, in a manner
>> > consistent with the SVE architectural programmer's model.
>> >
>> > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
>> > Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
>> > Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
>> > Cc: Alex Benn?e <alex.bennee@linaro.org>
>> >
>> > ---
>> >
>> > Kept Catalin's Reviewed-by, since this is a trivial change.
>> >
>> > Changes since v4
>> > ----------------
>> >
>> > Miscellaneous:
>> >
>> > * Mark do_sve_acc() as asmlinkage.
>> >
>> > (Semantic correctness only; no functional impact.)
>
> [...]
>
>> > diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
>> > index f5e851e..56e848f 100644
>> > --- a/arch/arm64/kernel/entry.S
>> > +++ b/arch/arm64/kernel/entry.S
>> > @@ -607,6 +607,8 @@ el0_sync:
>> > b.eq el0_ia
>> > cmp x24, #ESR_ELx_EC_FP_ASIMD // FP/ASIMD access
>> > b.eq el0_fpsimd_acc
>> > + cmp x24, #ESR_ELx_EC_SVE // SVE access
>> > + b.eq el0_sve_acc
>>
>> I'm guessing there is a point that this long chain of cmp instructions
>> is better handled with a jump table? One for the maintainer though I
>> guess?
>
> Probably it would be worth refactoring this at some point.
>
> There's a tradeoff between the length of this list the extra D-cache
> and/or branch miss(es) that might result from using a table.
>
> The optimimum approach would be microarchitecture dependent, but I
> suspect a good compromise would be to profile this, pick the few most
> common / most latency sensitive exception types and keep those as
> compare-and-branch, deferring the remainder to a table lookup.
>
> I had a vague plan to take a look at it, but for this series is
> was very much in "nice-to-have" territory.
>
>> > cmp x24, #ESR_ELx_EC_FP_EXC64 // FP/ASIMD exception
>> > b.eq el0_fpsimd_exc
>> > cmp x24, #ESR_ELx_EC_SYS64 // configurable trap
>> > @@ -658,6 +660,7 @@ el0_svc_compat:
>> > /*
>> > * AArch32 syscall handling
>> > */
>> > + ldr x16, [tsk, #TSK_TI_FLAGS] // load thread flags
>> > adrp stbl, compat_sys_call_table // load compat syscall table pointer
>> > mov wscno, w7 // syscall number in w7 (r7)
>> > mov wsc_nr, #__NR_compat_syscalls
>
> [...]
>
>> > @@ -835,16 +848,36 @@ ENDPROC(ret_to_user)
>> > */
>> > .align 6
>> > el0_svc:
>> > + ldr x16, [tsk, #TSK_TI_FLAGS] // load thread flags
>> > adrp stbl, sys_call_table // load syscall table pointer
>> > mov wscno, w8 // syscall number in w8
>> > mov wsc_nr, #__NR_syscalls
>> > +
>> > +#ifndef CONFIG_ARM64_SVE
>> > + b el0_svc_naked
>>
>> Hmm we've hoisted the ldr x16, [tsk, #TSK_TI_FLAGS] out of el0_svc_naked
>> but we'll still be testing the bit when CONFIG_ARM64_SVE isn't enabled?
>
> Where? In this patch it's #ifdef'd out. In "Detect SVE and activate
> runtime support" this is converted to an asm alternative, so this should
> reduce to a statically predictable branch when CONFIG_ARM64_SVE=y but
> SVE support is not detected.
>
>> I'm not clear why you couldn't keep that where it was?
>
> Catalin wasn't keen on the duplication of work reading and writing the
> thread flags, so I moved it to the common path.
Ahh sorry, I see it now.
Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
>
>>
>> > +#else
>> > + tbz x16, #TIF_SVE, el0_svc_naked // Skip unless TIF_SVE set:
>> > + bic x16, x16, #_TIF_SVE // discard SVE state
>> > + str x16, [tsk, #TSK_TI_FLAGS]
>> > +
>> > + /*
>> > + * task_fpsimd_load() won't be called to update CPACR_EL1 in
>> > + * ret_to_user unless TIF_FOREIGN_FPSTATE is still set, which only
>> > + * happens if a context switch or kernel_neon_begin() or context
>> > + * modification (sigreturn, ptrace) intervenes.
>> > + * So, ensure that CPACR_EL1 is already correct for the fast-path case:
>> > + */
>> > + mrs x9, cpacr_el1
>> > + bic x9, x9, #CPACR_EL1_ZEN_EL0EN // disable SVE for el0
>> > + msr cpacr_el1, x9 // synchronised by eret to el0
>> > +#endif /* CONFIG_ARM64_SVE */
>> > +
>> > el0_svc_naked: // compat entry point
>> > stp x0, xscno, [sp, #S_ORIG_X0] // save the original x0 and syscall number
>> > enable_dbg_and_irq
>> > ct_user_exit 1
>> >
>> > - ldr x16, [tsk, #TSK_TI_FLAGS] // check for syscall hooks
>> > - tst x16, #_TIF_SYSCALL_WORK
>> > + tst x16, #_TIF_SYSCALL_WORK // check for syscall hooks
>> > b.ne __sys_trace
>> > cmp wscno, wsc_nr // check upper syscall limit
>> > b.hs ni_sys
>
> [...]
>
>> > diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
>> > index 18c0290..9d3c7f0 100644
>> > --- a/arch/arm64/kernel/traps.c
>> > +++ b/arch/arm64/kernel/traps.c
>> > @@ -310,8 +310,8 @@ static int call_undef_hook(struct pt_regs *regs)
>> > return fn ? fn(regs, instr) : 1;
>> > }
>> >
>> > -static void force_signal_inject(int signal, int code, struct pt_regs *regs,
>> > - unsigned long address)
>> > +void force_signal_inject(int signal, int code, struct pt_regs *regs,
>> > + unsigned long address)
>> > {
>> > siginfo_t info;
>> > void __user *pc = (void __user *)instruction_pointer(regs);
>> > @@ -325,7 +325,7 @@ static void force_signal_inject(int signal, int code, struct pt_regs *regs,
>> > desc = "illegal memory access";
>> > break;
>> > default:
>> > - desc = "bad mode";
>> > + desc = "unknown or unrecoverable error";
>> > break;
>> > }
>>
>> Is this a separate trivial clean-up patch? It seems like you should
>> handle SIGKILL explicitly?
>
> I considered it part of this patch, since this function is not currently
> used elsewhere.
>
> I only expect this path to be followed as a catch-all for BUG() like
> conditions that can be contained by killing the user task. Printing
> out a super-descriptive message didn't seem appropriate, but "bad mode"
> is especially opaque. I think that was a paste from arch/arm -- AArch64
> doesn't have "modes" as such.
>
> Cheers
> ---Dave
--
Alex Benn?e
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 16/30] arm64/sve: Backend logic for setting the vector length
@ 2017-11-10 10:27 ` Alex Bennée
0 siblings, 0 replies; 174+ messages in thread
From: Alex Bennée @ 2017-11-10 10:27 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel, Catalin Marinas, Will Deacon, Ard Biesheuvel,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
Dave Martin <Dave.Martin@arm.com> writes:
> This patch implements the core logic for changing a task's vector
> length on request from userspace. This will be used by the ptrace
> and prctl frontends that are implemented in later patches.
>
> The SVE architecture permits, but does not require, implementations
> to support vector lengths that are not a power of two. To handle
> this, logic is added to check a requested vector length against a
> possibly sparse bitmap of available vector lengths at runtime, so
> that the best supported value can be chosen.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> arch/arm64/include/asm/fpsimd.h | 8 +++
> arch/arm64/kernel/fpsimd.c | 137 +++++++++++++++++++++++++++++++++++++++-
> include/uapi/linux/prctl.h | 5 ++
> 3 files changed, 149 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
> index 9bbd74c..86f550c 100644
> --- a/arch/arm64/include/asm/fpsimd.h
> +++ b/arch/arm64/include/asm/fpsimd.h
> @@ -20,6 +20,7 @@
>
> #ifndef __ASSEMBLY__
>
> +#include <linux/cache.h>
> #include <linux/stddef.h>
>
> /*
> @@ -70,17 +71,24 @@ extern void fpsimd_update_current_state(struct fpsimd_state *state);
>
> extern void fpsimd_flush_task_state(struct task_struct *target);
>
> +/* Maximum VL that SVE VL-agnostic software can transparently support */
> +#define SVE_VL_ARCH_MAX 0x100
> +
> extern void sve_save_state(void *state, u32 *pfpsr);
> extern void sve_load_state(void const *state, u32 const *pfpsr,
> unsigned long vq_minus_1);
> extern unsigned int sve_get_vl(void);
>
> +extern int __ro_after_init sve_max_vl;
> +
> #ifdef CONFIG_ARM64_SVE
>
> extern size_t sve_state_size(struct task_struct const *task);
>
> extern void sve_alloc(struct task_struct *task);
> extern void fpsimd_release_task(struct task_struct *task);
> +extern int sve_set_vector_length(struct task_struct *task,
> + unsigned long vl, unsigned long flags);
>
> #else /* ! CONFIG_ARM64_SVE */
>
> diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
> index e0b5ef5..1ceb069 100644
> --- a/arch/arm64/kernel/fpsimd.c
> +++ b/arch/arm64/kernel/fpsimd.c
> @@ -17,8 +17,10 @@
> * along with this program. If not, see <http://www.gnu.org/licenses/>.
> */
>
> +#include <linux/bitmap.h>
> #include <linux/bottom_half.h>
> #include <linux/bug.h>
> +#include <linux/cache.h>
> #include <linux/compat.h>
> #include <linux/cpu.h>
> #include <linux/cpu_pm.h>
> @@ -28,6 +30,7 @@
> #include <linux/init.h>
> #include <linux/percpu.h>
> #include <linux/preempt.h>
> +#include <linux/prctl.h>
> #include <linux/ptrace.h>
> #include <linux/sched/signal.h>
> #include <linux/signal.h>
> @@ -113,6 +116,20 @@ static DEFINE_PER_CPU(struct fpsimd_state *, fpsimd_last_state);
> /* Default VL for tasks that don't set it explicitly: */
> static int sve_default_vl = SVE_VL_MIN;
>
> +#ifdef CONFIG_ARM64_SVE
> +
> +/* Maximum supported vector length across all CPUs (initially poisoned) */
> +int __ro_after_init sve_max_vl = -1;
> +/* Set of available vector lengths, as vq_to_bit(vq): */
> +static DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
> +
> +#else /* ! CONFIG_ARM64_SVE */
> +
> +/* Dummy declaration for code that will be optimised out: */
> +extern DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
> +
> +#endif /* ! CONFIG_ARM64_SVE */
> +
> /*
> * Call __sve_free() directly only if you know task can't be scheduled
> * or preempted.
> @@ -270,6 +287,50 @@ static void task_fpsimd_save(void)
> }
> }
>
> +/*
> + * Helpers to translate bit indices in sve_vq_map to VQ values (and
> + * vice versa). This allows find_next_bit() to be used to find the
> + * _maximum_ VQ not exceeding a certain value.
> + */
> +
> +static unsigned int vq_to_bit(unsigned int vq)
> +{
> + return SVE_VQ_MAX - vq;
> +}
> +
> +static unsigned int bit_to_vq(unsigned int bit)
> +{
> + if (WARN_ON(bit >= SVE_VQ_MAX))
> + bit = SVE_VQ_MAX - 1;
> +
> + return SVE_VQ_MAX - bit;
> +}
> +
> +/*
> + * All vector length selection from userspace comes through here.
> + * We're on a slow path, so some sanity-checks are included.
> + * If things go wrong there's a bug somewhere, but try to fall back to a
> + * safe choice.
> + */
> +static unsigned int find_supported_vector_length(unsigned int vl)
> +{
> + int bit;
> + int max_vl = sve_max_vl;
> +
> + if (WARN_ON(!sve_vl_valid(vl)))
> + vl = SVE_VL_MIN;
> +
> + if (WARN_ON(!sve_vl_valid(max_vl)))
> + max_vl = SVE_VL_MIN;
> +
> + if (vl > max_vl)
> + vl = max_vl;
> +
> + bit = find_next_bit(sve_vq_map, SVE_VQ_MAX,
> + vq_to_bit(sve_vq_from_vl(vl)));
> + return sve_vl_from_vq(bit_to_vq(bit));
> +}
> +
> #define ZREG(sve_state, vq, n) ((char *)(sve_state) + \
> (SVE_SIG_ZREG_OFFSET(vq, n) - SVE_SIG_REGS_OFFSET))
>
> @@ -364,6 +425,76 @@ void sve_alloc(struct task_struct *task)
> BUG_ON(!task->thread.sve_state);
> }
>
> +int sve_set_vector_length(struct task_struct *task,
> + unsigned long vl, unsigned long flags)
> +{
> + if (flags & ~(unsigned long)(PR_SVE_VL_INHERIT |
> + PR_SVE_SET_VL_ONEXEC))
> + return -EINVAL;
> +
> + if (!sve_vl_valid(vl))
> + return -EINVAL;
> +
> + /*
> + * Clamp to the maximum vector length that VL-agnostic SVE code can
> + * work with. A flag may be assigned in the future to allow setting
> + * of larger vector lengths without confusing older software.
> + */
> + if (vl > SVE_VL_ARCH_MAX)
> + vl = SVE_VL_ARCH_MAX;
> +
> + vl = find_supported_vector_length(vl);
> +
> + if (flags & (PR_SVE_VL_INHERIT |
> + PR_SVE_SET_VL_ONEXEC))
> + task->thread.sve_vl_onexec = vl;
> + else
> + /* Reset VL to system default on next exec: */
> + task->thread.sve_vl_onexec = 0;
> +
> + /* Only actually set the VL if not deferred: */
> + if (flags & PR_SVE_SET_VL_ONEXEC)
> + goto out;
> +
> + if (vl == task->thread.sve_vl)
> + goto out;
> +
> + /*
> + * To ensure the FPSIMD bits of the SVE vector registers are preserved,
> + * write any live register state back to task_struct, and convert to a
> + * non-SVE thread.
> + */
> + if (task == current) {
> + local_bh_disable();
> +
> + task_fpsimd_save();
> + set_thread_flag(TIF_FOREIGN_FPSTATE);
> + }
> +
> + fpsimd_flush_task_state(task);
> + if (test_and_clear_tsk_thread_flag(task, TIF_SVE))
> + sve_to_fpsimd(task);
> +
> + if (task == current)
> + local_bh_enable();
> +
> + /*
> + * Force reallocation of task SVE state to the correct size
> + * on next use:
> + */
> + sve_free(task);
> +
> + task->thread.sve_vl = vl;
> +
> +out:
> + if (flags & PR_SVE_VL_INHERIT)
> + set_tsk_thread_flag(task, TIF_SVE_VL_INHERIT);
> + else
> + clear_tsk_thread_flag(task, TIF_SVE_VL_INHERIT);
> +
> + return 0;
> +}
> +
> /*
> * Called from the put_task_struct() path, which cannot get here
> * unless dead_task is really dead and not schedulable.
> @@ -480,7 +611,7 @@ void fpsimd_thread_switch(struct task_struct *next)
>
> void fpsimd_flush_thread(void)
> {
> - int vl;
> + int vl, supported_vl;
>
> if (!system_supports_fpsimd())
> return;
> @@ -508,6 +639,10 @@ void fpsimd_flush_thread(void)
> if (WARN_ON(!sve_vl_valid(vl)))
> vl = SVE_VL_MIN;
>
> + supported_vl = find_supported_vector_length(vl);
> + if (WARN_ON(supported_vl != vl))
> + vl = supported_vl;
> +
> current->thread.sve_vl = vl;
>
> /*
> diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h
> index a8d0759..1b64901 100644
> --- a/include/uapi/linux/prctl.h
> +++ b/include/uapi/linux/prctl.h
> @@ -197,4 +197,9 @@ struct prctl_mm_map {
> # define PR_CAP_AMBIENT_LOWER 3
> # define PR_CAP_AMBIENT_CLEAR_ALL 4
>
> +/* arm64 Scalable Vector Extension controls */
> +# define PR_SVE_SET_VL_ONEXEC (1 << 18) /* defer effect until exec */
> +# define PR_SVE_VL_LEN_MASK 0xffff
> +# define PR_SVE_VL_INHERIT (1 << 17) /* inherit across exec */
> +
> #endif /* _LINUX_PRCTL_H */
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 16/30] arm64/sve: Backend logic for setting the vector length
@ 2017-11-10 10:27 ` Alex Bennée
0 siblings, 0 replies; 174+ messages in thread
From: Alex Bennée @ 2017-11-10 10:27 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel, Catalin Marinas, Will Deacon, Ard Biesheuvel,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch
Dave Martin <Dave.Martin@arm.com> writes:
> This patch implements the core logic for changing a task's vector
> length on request from userspace. This will be used by the ptrace
> and prctl frontends that are implemented in later patches.
>
> The SVE architecture permits, but does not require, implementations
> to support vector lengths that are not a power of two. To handle
> this, logic is added to check a requested vector length against a
> possibly sparse bitmap of available vector lengths at runtime, so
> that the best supported value can be chosen.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> arch/arm64/include/asm/fpsimd.h | 8 +++
> arch/arm64/kernel/fpsimd.c | 137 +++++++++++++++++++++++++++++++++++++++-
> include/uapi/linux/prctl.h | 5 ++
> 3 files changed, 149 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
> index 9bbd74c..86f550c 100644
> --- a/arch/arm64/include/asm/fpsimd.h
> +++ b/arch/arm64/include/asm/fpsimd.h
> @@ -20,6 +20,7 @@
>
> #ifndef __ASSEMBLY__
>
> +#include <linux/cache.h>
> #include <linux/stddef.h>
>
> /*
> @@ -70,17 +71,24 @@ extern void fpsimd_update_current_state(struct fpsimd_state *state);
>
> extern void fpsimd_flush_task_state(struct task_struct *target);
>
> +/* Maximum VL that SVE VL-agnostic software can transparently support */
> +#define SVE_VL_ARCH_MAX 0x100
> +
> extern void sve_save_state(void *state, u32 *pfpsr);
> extern void sve_load_state(void const *state, u32 const *pfpsr,
> unsigned long vq_minus_1);
> extern unsigned int sve_get_vl(void);
>
> +extern int __ro_after_init sve_max_vl;
> +
> #ifdef CONFIG_ARM64_SVE
>
> extern size_t sve_state_size(struct task_struct const *task);
>
> extern void sve_alloc(struct task_struct *task);
> extern void fpsimd_release_task(struct task_struct *task);
> +extern int sve_set_vector_length(struct task_struct *task,
> + unsigned long vl, unsigned long flags);
>
> #else /* ! CONFIG_ARM64_SVE */
>
> diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
> index e0b5ef5..1ceb069 100644
> --- a/arch/arm64/kernel/fpsimd.c
> +++ b/arch/arm64/kernel/fpsimd.c
> @@ -17,8 +17,10 @@
> * along with this program. If not, see <http://www.gnu.org/licenses/>.
> */
>
> +#include <linux/bitmap.h>
> #include <linux/bottom_half.h>
> #include <linux/bug.h>
> +#include <linux/cache.h>
> #include <linux/compat.h>
> #include <linux/cpu.h>
> #include <linux/cpu_pm.h>
> @@ -28,6 +30,7 @@
> #include <linux/init.h>
> #include <linux/percpu.h>
> #include <linux/preempt.h>
> +#include <linux/prctl.h>
> #include <linux/ptrace.h>
> #include <linux/sched/signal.h>
> #include <linux/signal.h>
> @@ -113,6 +116,20 @@ static DEFINE_PER_CPU(struct fpsimd_state *, fpsimd_last_state);
> /* Default VL for tasks that don't set it explicitly: */
> static int sve_default_vl = SVE_VL_MIN;
>
> +#ifdef CONFIG_ARM64_SVE
> +
> +/* Maximum supported vector length across all CPUs (initially poisoned) */
> +int __ro_after_init sve_max_vl = -1;
> +/* Set of available vector lengths, as vq_to_bit(vq): */
> +static DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
> +
> +#else /* ! CONFIG_ARM64_SVE */
> +
> +/* Dummy declaration for code that will be optimised out: */
> +extern DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
> +
> +#endif /* ! CONFIG_ARM64_SVE */
> +
> /*
> * Call __sve_free() directly only if you know task can't be scheduled
> * or preempted.
> @@ -270,6 +287,50 @@ static void task_fpsimd_save(void)
> }
> }
>
> +/*
> + * Helpers to translate bit indices in sve_vq_map to VQ values (and
> + * vice versa). This allows find_next_bit() to be used to find the
> + * _maximum_ VQ not exceeding a certain value.
> + */
> +
> +static unsigned int vq_to_bit(unsigned int vq)
> +{
> + return SVE_VQ_MAX - vq;
> +}
> +
> +static unsigned int bit_to_vq(unsigned int bit)
> +{
> + if (WARN_ON(bit >= SVE_VQ_MAX))
> + bit = SVE_VQ_MAX - 1;
> +
> + return SVE_VQ_MAX - bit;
> +}
> +
> +/*
> + * All vector length selection from userspace comes through here.
> + * We're on a slow path, so some sanity-checks are included.
> + * If things go wrong there's a bug somewhere, but try to fall back to a
> + * safe choice.
> + */
> +static unsigned int find_supported_vector_length(unsigned int vl)
> +{
> + int bit;
> + int max_vl = sve_max_vl;
> +
> + if (WARN_ON(!sve_vl_valid(vl)))
> + vl = SVE_VL_MIN;
> +
> + if (WARN_ON(!sve_vl_valid(max_vl)))
> + max_vl = SVE_VL_MIN;
> +
> + if (vl > max_vl)
> + vl = max_vl;
> +
> + bit = find_next_bit(sve_vq_map, SVE_VQ_MAX,
> + vq_to_bit(sve_vq_from_vl(vl)));
> + return sve_vl_from_vq(bit_to_vq(bit));
> +}
> +
> #define ZREG(sve_state, vq, n) ((char *)(sve_state) + \
> (SVE_SIG_ZREG_OFFSET(vq, n) - SVE_SIG_REGS_OFFSET))
>
> @@ -364,6 +425,76 @@ void sve_alloc(struct task_struct *task)
> BUG_ON(!task->thread.sve_state);
> }
>
> +int sve_set_vector_length(struct task_struct *task,
> + unsigned long vl, unsigned long flags)
> +{
> + if (flags & ~(unsigned long)(PR_SVE_VL_INHERIT |
> + PR_SVE_SET_VL_ONEXEC))
> + return -EINVAL;
> +
> + if (!sve_vl_valid(vl))
> + return -EINVAL;
> +
> + /*
> + * Clamp to the maximum vector length that VL-agnostic SVE code can
> + * work with. A flag may be assigned in the future to allow setting
> + * of larger vector lengths without confusing older software.
> + */
> + if (vl > SVE_VL_ARCH_MAX)
> + vl = SVE_VL_ARCH_MAX;
> +
> + vl = find_supported_vector_length(vl);
> +
> + if (flags & (PR_SVE_VL_INHERIT |
> + PR_SVE_SET_VL_ONEXEC))
> + task->thread.sve_vl_onexec = vl;
> + else
> + /* Reset VL to system default on next exec: */
> + task->thread.sve_vl_onexec = 0;
> +
> + /* Only actually set the VL if not deferred: */
> + if (flags & PR_SVE_SET_VL_ONEXEC)
> + goto out;
> +
> + if (vl == task->thread.sve_vl)
> + goto out;
> +
> + /*
> + * To ensure the FPSIMD bits of the SVE vector registers are preserved,
> + * write any live register state back to task_struct, and convert to a
> + * non-SVE thread.
> + */
> + if (task == current) {
> + local_bh_disable();
> +
> + task_fpsimd_save();
> + set_thread_flag(TIF_FOREIGN_FPSTATE);
> + }
> +
> + fpsimd_flush_task_state(task);
> + if (test_and_clear_tsk_thread_flag(task, TIF_SVE))
> + sve_to_fpsimd(task);
> +
> + if (task == current)
> + local_bh_enable();
> +
> + /*
> + * Force reallocation of task SVE state to the correct size
> + * on next use:
> + */
> + sve_free(task);
> +
> + task->thread.sve_vl = vl;
> +
> +out:
> + if (flags & PR_SVE_VL_INHERIT)
> + set_tsk_thread_flag(task, TIF_SVE_VL_INHERIT);
> + else
> + clear_tsk_thread_flag(task, TIF_SVE_VL_INHERIT);
> +
> + return 0;
> +}
> +
> /*
> * Called from the put_task_struct() path, which cannot get here
> * unless dead_task is really dead and not schedulable.
> @@ -480,7 +611,7 @@ void fpsimd_thread_switch(struct task_struct *next)
>
> void fpsimd_flush_thread(void)
> {
> - int vl;
> + int vl, supported_vl;
>
> if (!system_supports_fpsimd())
> return;
> @@ -508,6 +639,10 @@ void fpsimd_flush_thread(void)
> if (WARN_ON(!sve_vl_valid(vl)))
> vl = SVE_VL_MIN;
>
> + supported_vl = find_supported_vector_length(vl);
> + if (WARN_ON(supported_vl != vl))
> + vl = supported_vl;
> +
> current->thread.sve_vl = vl;
>
> /*
> diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h
> index a8d0759..1b64901 100644
> --- a/include/uapi/linux/prctl.h
> +++ b/include/uapi/linux/prctl.h
> @@ -197,4 +197,9 @@ struct prctl_mm_map {
> # define PR_CAP_AMBIENT_LOWER 3
> # define PR_CAP_AMBIENT_CLEAR_ALL 4
>
> +/* arm64 Scalable Vector Extension controls */
> +# define PR_SVE_SET_VL_ONEXEC (1 << 18) /* defer effect until exec */
> +# define PR_SVE_VL_LEN_MASK 0xffff
> +# define PR_SVE_VL_INHERIT (1 << 17) /* inherit across exec */
> +
> #endif /* _LINUX_PRCTL_H */
--
Alex Bennée
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 16/30] arm64/sve: Backend logic for setting the vector length
@ 2017-11-10 10:27 ` Alex Bennée
0 siblings, 0 replies; 174+ messages in thread
From: Alex Bennée @ 2017-11-10 10:27 UTC (permalink / raw)
To: linux-arm-kernel
Dave Martin <Dave.Martin@arm.com> writes:
> This patch implements the core logic for changing a task's vector
> length on request from userspace. This will be used by the ptrace
> and prctl frontends that are implemented in later patches.
>
> The SVE architecture permits, but does not require, implementations
> to support vector lengths that are not a power of two. To handle
> this, logic is added to check a requested vector length against a
> possibly sparse bitmap of available vector lengths at runtime, so
> that the best supported value can be chosen.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Alex Benn?e <alex.bennee@linaro.org>
Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
> ---
> arch/arm64/include/asm/fpsimd.h | 8 +++
> arch/arm64/kernel/fpsimd.c | 137 +++++++++++++++++++++++++++++++++++++++-
> include/uapi/linux/prctl.h | 5 ++
> 3 files changed, 149 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
> index 9bbd74c..86f550c 100644
> --- a/arch/arm64/include/asm/fpsimd.h
> +++ b/arch/arm64/include/asm/fpsimd.h
> @@ -20,6 +20,7 @@
>
> #ifndef __ASSEMBLY__
>
> +#include <linux/cache.h>
> #include <linux/stddef.h>
>
> /*
> @@ -70,17 +71,24 @@ extern void fpsimd_update_current_state(struct fpsimd_state *state);
>
> extern void fpsimd_flush_task_state(struct task_struct *target);
>
> +/* Maximum VL that SVE VL-agnostic software can transparently support */
> +#define SVE_VL_ARCH_MAX 0x100
> +
> extern void sve_save_state(void *state, u32 *pfpsr);
> extern void sve_load_state(void const *state, u32 const *pfpsr,
> unsigned long vq_minus_1);
> extern unsigned int sve_get_vl(void);
>
> +extern int __ro_after_init sve_max_vl;
> +
> #ifdef CONFIG_ARM64_SVE
>
> extern size_t sve_state_size(struct task_struct const *task);
>
> extern void sve_alloc(struct task_struct *task);
> extern void fpsimd_release_task(struct task_struct *task);
> +extern int sve_set_vector_length(struct task_struct *task,
> + unsigned long vl, unsigned long flags);
>
> #else /* ! CONFIG_ARM64_SVE */
>
> diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
> index e0b5ef5..1ceb069 100644
> --- a/arch/arm64/kernel/fpsimd.c
> +++ b/arch/arm64/kernel/fpsimd.c
> @@ -17,8 +17,10 @@
> * along with this program. If not, see <http://www.gnu.org/licenses/>.
> */
>
> +#include <linux/bitmap.h>
> #include <linux/bottom_half.h>
> #include <linux/bug.h>
> +#include <linux/cache.h>
> #include <linux/compat.h>
> #include <linux/cpu.h>
> #include <linux/cpu_pm.h>
> @@ -28,6 +30,7 @@
> #include <linux/init.h>
> #include <linux/percpu.h>
> #include <linux/preempt.h>
> +#include <linux/prctl.h>
> #include <linux/ptrace.h>
> #include <linux/sched/signal.h>
> #include <linux/signal.h>
> @@ -113,6 +116,20 @@ static DEFINE_PER_CPU(struct fpsimd_state *, fpsimd_last_state);
> /* Default VL for tasks that don't set it explicitly: */
> static int sve_default_vl = SVE_VL_MIN;
>
> +#ifdef CONFIG_ARM64_SVE
> +
> +/* Maximum supported vector length across all CPUs (initially poisoned) */
> +int __ro_after_init sve_max_vl = -1;
> +/* Set of available vector lengths, as vq_to_bit(vq): */
> +static DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
> +
> +#else /* ! CONFIG_ARM64_SVE */
> +
> +/* Dummy declaration for code that will be optimised out: */
> +extern DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
> +
> +#endif /* ! CONFIG_ARM64_SVE */
> +
> /*
> * Call __sve_free() directly only if you know task can't be scheduled
> * or preempted.
> @@ -270,6 +287,50 @@ static void task_fpsimd_save(void)
> }
> }
>
> +/*
> + * Helpers to translate bit indices in sve_vq_map to VQ values (and
> + * vice versa). This allows find_next_bit() to be used to find the
> + * _maximum_ VQ not exceeding a certain value.
> + */
> +
> +static unsigned int vq_to_bit(unsigned int vq)
> +{
> + return SVE_VQ_MAX - vq;
> +}
> +
> +static unsigned int bit_to_vq(unsigned int bit)
> +{
> + if (WARN_ON(bit >= SVE_VQ_MAX))
> + bit = SVE_VQ_MAX - 1;
> +
> + return SVE_VQ_MAX - bit;
> +}
> +
> +/*
> + * All vector length selection from userspace comes through here.
> + * We're on a slow path, so some sanity-checks are included.
> + * If things go wrong there's a bug somewhere, but try to fall back to a
> + * safe choice.
> + */
> +static unsigned int find_supported_vector_length(unsigned int vl)
> +{
> + int bit;
> + int max_vl = sve_max_vl;
> +
> + if (WARN_ON(!sve_vl_valid(vl)))
> + vl = SVE_VL_MIN;
> +
> + if (WARN_ON(!sve_vl_valid(max_vl)))
> + max_vl = SVE_VL_MIN;
> +
> + if (vl > max_vl)
> + vl = max_vl;
> +
> + bit = find_next_bit(sve_vq_map, SVE_VQ_MAX,
> + vq_to_bit(sve_vq_from_vl(vl)));
> + return sve_vl_from_vq(bit_to_vq(bit));
> +}
> +
> #define ZREG(sve_state, vq, n) ((char *)(sve_state) + \
> (SVE_SIG_ZREG_OFFSET(vq, n) - SVE_SIG_REGS_OFFSET))
>
> @@ -364,6 +425,76 @@ void sve_alloc(struct task_struct *task)
> BUG_ON(!task->thread.sve_state);
> }
>
> +int sve_set_vector_length(struct task_struct *task,
> + unsigned long vl, unsigned long flags)
> +{
> + if (flags & ~(unsigned long)(PR_SVE_VL_INHERIT |
> + PR_SVE_SET_VL_ONEXEC))
> + return -EINVAL;
> +
> + if (!sve_vl_valid(vl))
> + return -EINVAL;
> +
> + /*
> + * Clamp to the maximum vector length that VL-agnostic SVE code can
> + * work with. A flag may be assigned in the future to allow setting
> + * of larger vector lengths without confusing older software.
> + */
> + if (vl > SVE_VL_ARCH_MAX)
> + vl = SVE_VL_ARCH_MAX;
> +
> + vl = find_supported_vector_length(vl);
> +
> + if (flags & (PR_SVE_VL_INHERIT |
> + PR_SVE_SET_VL_ONEXEC))
> + task->thread.sve_vl_onexec = vl;
> + else
> + /* Reset VL to system default on next exec: */
> + task->thread.sve_vl_onexec = 0;
> +
> + /* Only actually set the VL if not deferred: */
> + if (flags & PR_SVE_SET_VL_ONEXEC)
> + goto out;
> +
> + if (vl == task->thread.sve_vl)
> + goto out;
> +
> + /*
> + * To ensure the FPSIMD bits of the SVE vector registers are preserved,
> + * write any live register state back to task_struct, and convert to a
> + * non-SVE thread.
> + */
> + if (task == current) {
> + local_bh_disable();
> +
> + task_fpsimd_save();
> + set_thread_flag(TIF_FOREIGN_FPSTATE);
> + }
> +
> + fpsimd_flush_task_state(task);
> + if (test_and_clear_tsk_thread_flag(task, TIF_SVE))
> + sve_to_fpsimd(task);
> +
> + if (task == current)
> + local_bh_enable();
> +
> + /*
> + * Force reallocation of task SVE state to the correct size
> + * on next use:
> + */
> + sve_free(task);
> +
> + task->thread.sve_vl = vl;
> +
> +out:
> + if (flags & PR_SVE_VL_INHERIT)
> + set_tsk_thread_flag(task, TIF_SVE_VL_INHERIT);
> + else
> + clear_tsk_thread_flag(task, TIF_SVE_VL_INHERIT);
> +
> + return 0;
> +}
> +
> /*
> * Called from the put_task_struct() path, which cannot get here
> * unless dead_task is really dead and not schedulable.
> @@ -480,7 +611,7 @@ void fpsimd_thread_switch(struct task_struct *next)
>
> void fpsimd_flush_thread(void)
> {
> - int vl;
> + int vl, supported_vl;
>
> if (!system_supports_fpsimd())
> return;
> @@ -508,6 +639,10 @@ void fpsimd_flush_thread(void)
> if (WARN_ON(!sve_vl_valid(vl)))
> vl = SVE_VL_MIN;
>
> + supported_vl = find_supported_vector_length(vl);
> + if (WARN_ON(supported_vl != vl))
> + vl = supported_vl;
> +
> current->thread.sve_vl = vl;
>
> /*
> diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h
> index a8d0759..1b64901 100644
> --- a/include/uapi/linux/prctl.h
> +++ b/include/uapi/linux/prctl.h
> @@ -197,4 +197,9 @@ struct prctl_mm_map {
> # define PR_CAP_AMBIENT_LOWER 3
> # define PR_CAP_AMBIENT_CLEAR_ALL 4
>
> +/* arm64 Scalable Vector Extension controls */
> +# define PR_SVE_SET_VL_ONEXEC (1 << 18) /* defer effect until exec */
> +# define PR_SVE_VL_LEN_MASK 0xffff
> +# define PR_SVE_VL_INHERIT (1 << 17) /* inherit across exec */
> +
> #endif /* _LINUX_PRCTL_H */
--
Alex Benn?e
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2017-11-29 15:04 ` Alex Bennée
0 siblings, 0 replies; 174+ messages in thread
From: Alex Bennée @ 2017-11-29 15:04 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel, Catalin Marinas, Will Deacon, Ard Biesheuvel,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch,
Alan Hayward, Alexander Viro, Christoffer Dall, Mark Rutland,
Oleg Nesterov, Dmitry Safonov, H . J . Lu, H. Peter Anvin,
Ingo Molnar, Thomas Gleixner, Michael Kerrisk, linux-api
Dave Martin <Dave.Martin@arm.com> writes:
> This series implements Linux kernel support for the ARM Scalable Vector
> Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> and full cover letter.
>
> This is a minor update to v4, but does contain a couple of important
> fixes.
<snip>
I seem to have run into a regression with normal non-SVE sigcontexts
while trying to run consecutive RISU runs in the Foundation Model. I'm
failing to get repeatable results playing back a previous --master run.
It works OK with the default Debian kernel.
What is the current status of the tree? I'd like to try an narrow it
down but I seem to recall it was now in a next tree somewhere?
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2017-11-29 15:04 ` Alex Bennée
0 siblings, 0 replies; 174+ messages in thread
From: Alex Bennée @ 2017-11-29 15:04 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel, Catalin Marinas, Will Deacon, Ard Biesheuvel,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch,
Alan Hayward, Alexander Viro, Christoffer Dall, Mark Rutland,
Oleg Nesterov, Dmitry Safonov, H . J . Lu, H. Peter Anvin,
Ingo Molnar, Thomas Gleixner, Michael Kerrisk, linux-api
Dave Martin <Dave.Martin@arm.com> writes:
> This series implements Linux kernel support for the ARM Scalable Vector
> Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> and full cover letter.
>
> This is a minor update to v4, but does contain a couple of important
> fixes.
<snip>
I seem to have run into a regression with normal non-SVE sigcontexts
while trying to run consecutive RISU runs in the Foundation Model. I'm
failing to get repeatable results playing back a previous --master run.
It works OK with the default Debian kernel.
What is the current status of the tree? I'd like to try an narrow it
down but I seem to recall it was now in a next tree somewhere?
--
Alex Bennée
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2017-11-29 15:04 ` Alex Bennée
0 siblings, 0 replies; 174+ messages in thread
From: Alex Bennée @ 2017-11-29 15:04 UTC (permalink / raw)
To: linux-arm-kernel
Dave Martin <Dave.Martin@arm.com> writes:
> This series implements Linux kernel support for the ARM Scalable Vector
> Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> and full cover letter.
>
> This is a minor update to v4, but does contain a couple of important
> fixes.
<snip>
I seem to have run into a regression with normal non-SVE sigcontexts
while trying to run consecutive RISU runs in the Foundation Model. I'm
failing to get repeatable results playing back a previous --master run.
It works OK with the default Debian kernel.
What is the current status of the tree? I'd like to try an narrow it
down but I seem to recall it was now in a next tree somewhere?
--
Alex Benn?e
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2017-11-29 15:21 ` Will Deacon
0 siblings, 0 replies; 174+ messages in thread
From: Will Deacon @ 2017-11-29 15:21 UTC (permalink / raw)
To: Alex Bennée
Cc: Dave Martin, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Catalin Marinas, Ard Biesheuvel, Szabolcs Nagy, Okamoto Takayuki,
kvmarm-FPEHb7Xf0XXUo1n7N8X6UoWGPAHP3yOg,
libc-alpha-9JcytcrH/bA+uJoB2kUjGw,
linux-arch-u79uwXL29TY76Z2rM5mHXA, Alan Hayward, Alexander Viro,
Christoffer Dall, Mark Rutland, Oleg Nesterov, Dmitry Safonov,
H . J . Lu, H. Peter Anvin, Ingo Molnar, Thomas Gleixner,
Michael Kerrisk, linux-api
On Wed, Nov 29, 2017 at 03:04:12PM +0000, Alex Bennée wrote:
>
> Dave Martin <Dave.Martin-5wv7dgnIgG8@public.gmane.org> writes:
>
> > This series implements Linux kernel support for the ARM Scalable Vector
> > Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> > and full cover letter.
> >
> > This is a minor update to v4, but does contain a couple of important
> > fixes.
> <snip>
>
> I seem to have run into a regression with normal non-SVE sigcontexts
> while trying to run consecutive RISU runs in the Foundation Model. I'm
> failing to get repeatable results playing back a previous --master run.
> It works OK with the default Debian kernel.
>
> What is the current status of the tree? I'd like to try an narrow it
> down but I seem to recall it was now in a next tree somewhere?
This is in mainline now, so please give a 4.15-rc1 build a spin. If there's
a user-visible regression then we need to get to the bottom of it ASAP.
Will
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2017-11-29 15:21 ` Will Deacon
0 siblings, 0 replies; 174+ messages in thread
From: Will Deacon @ 2017-11-29 15:21 UTC (permalink / raw)
To: Alex Bennée
Cc: Dave Martin, linux-arm-kernel, Catalin Marinas, Ard Biesheuvel,
Szabolcs Nagy, Okamoto Takayuki, kvmarm, libc-alpha, linux-arch,
Alan Hayward, Alexander Viro, Christoffer Dall, Mark Rutland,
Oleg Nesterov, Dmitry Safonov, H . J . Lu, H. Peter Anvin,
Ingo Molnar, Thomas Gleixner, Michael Kerrisk, linux-api
On Wed, Nov 29, 2017 at 03:04:12PM +0000, Alex Bennée wrote:
>
> Dave Martin <Dave.Martin@arm.com> writes:
>
> > This series implements Linux kernel support for the ARM Scalable Vector
> > Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> > and full cover letter.
> >
> > This is a minor update to v4, but does contain a couple of important
> > fixes.
> <snip>
>
> I seem to have run into a regression with normal non-SVE sigcontexts
> while trying to run consecutive RISU runs in the Foundation Model. I'm
> failing to get repeatable results playing back a previous --master run.
> It works OK with the default Debian kernel.
>
> What is the current status of the tree? I'd like to try an narrow it
> down but I seem to recall it was now in a next tree somewhere?
This is in mainline now, so please give a 4.15-rc1 build a spin. If there's
a user-visible regression then we need to get to the bottom of it ASAP.
Will
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2017-11-29 15:21 ` Will Deacon
0 siblings, 0 replies; 174+ messages in thread
From: Will Deacon @ 2017-11-29 15:21 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Nov 29, 2017 at 03:04:12PM +0000, Alex Benn?e wrote:
>
> Dave Martin <Dave.Martin@arm.com> writes:
>
> > This series implements Linux kernel support for the ARM Scalable Vector
> > Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> > and full cover letter.
> >
> > This is a minor update to v4, but does contain a couple of important
> > fixes.
> <snip>
>
> I seem to have run into a regression with normal non-SVE sigcontexts
> while trying to run consecutive RISU runs in the Foundation Model. I'm
> failing to get repeatable results playing back a previous --master run.
> It works OK with the default Debian kernel.
>
> What is the current status of the tree? I'd like to try an narrow it
> down but I seem to recall it was now in a next tree somewhere?
This is in mainline now, so please give a 4.15-rc1 build a spin. If there's
a user-visible regression then we need to get to the bottom of it ASAP.
Will
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2017-11-29 15:37 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-11-29 15:37 UTC (permalink / raw)
To: Alex Bennée
Cc: Will Deacon, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Catalin Marinas, Ard Biesheuvel, Szabolcs Nagy,
tokamoto-+CUm20s59erQFUHtdCDX3A,
kvmarm-FPEHb7Xf0XXUo1n7N8X6UoWGPAHP3yOg,
libc-alpha-9JcytcrH/bA+uJoB2kUjGw,
linux-arch-u79uwXL29TY76Z2rM5mHXA, Alan Hayward, Alexander Viro,
Christoffer Dall, Mark Rutland, Oleg Nesterov, Dmitry Safonov,
H . J . Lu, H.Peter
On Wed, Nov 29, 2017 at 03:21:40PM +0000, Will Deacon wrote:
> On Wed, Nov 29, 2017 at 03:04:12PM +0000, Alex Bennée wrote:
> >
> > Dave Martin <Dave.Martin-5wv7dgnIgG8@public.gmane.org> writes:
> >
> > > This series implements Linux kernel support for the ARM Scalable Vector
> > > Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> > > and full cover letter.
> > >
> > > This is a minor update to v4, but does contain a couple of important
> > > fixes.
> > <snip>
> >
> > I seem to have run into a regression with normal non-SVE sigcontexts
> > while trying to run consecutive RISU runs in the Foundation Model. I'm
> > failing to get repeatable results playing back a previous --master run.
> > It works OK with the default Debian kernel.
> >
> > What is the current status of the tree? I'd like to try an narrow it
> > down but I seem to recall it was now in a next tree somewhere?
>
> This is in mainline now, so please give a 4.15-rc1 build a spin. If there's
> a user-visible regression then we need to get to the bottom of it ASAP.
>
> Will
The other significant change was in v4.13, where the signal frame
parser rework landed.
What upstream version is your known-good Debian kernel based on?
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2017-11-29 15:37 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-11-29 15:37 UTC (permalink / raw)
To: Alex Bennée
Cc: Will Deacon, linux-arm-kernel, Catalin Marinas, Ard Biesheuvel,
Szabolcs Nagy, tokamoto, kvmarm, libc-alpha, linux-arch,
Alan Hayward, Alexander Viro, Christoffer Dall, Mark Rutland,
Oleg Nesterov, Dmitry Safonov, H . J . Lu, H. Peter Anvin,
Ingo Molnar, Thomas Gleixner, Michael Kerrisk, linux-api
On Wed, Nov 29, 2017 at 03:21:40PM +0000, Will Deacon wrote:
> On Wed, Nov 29, 2017 at 03:04:12PM +0000, Alex Bennée wrote:
> >
> > Dave Martin <Dave.Martin@arm.com> writes:
> >
> > > This series implements Linux kernel support for the ARM Scalable Vector
> > > Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> > > and full cover letter.
> > >
> > > This is a minor update to v4, but does contain a couple of important
> > > fixes.
> > <snip>
> >
> > I seem to have run into a regression with normal non-SVE sigcontexts
> > while trying to run consecutive RISU runs in the Foundation Model. I'm
> > failing to get repeatable results playing back a previous --master run.
> > It works OK with the default Debian kernel.
> >
> > What is the current status of the tree? I'd like to try an narrow it
> > down but I seem to recall it was now in a next tree somewhere?
>
> This is in mainline now, so please give a 4.15-rc1 build a spin. If there's
> a user-visible regression then we need to get to the bottom of it ASAP.
>
> Will
The other significant change was in v4.13, where the signal frame
parser rework landed.
What upstream version is your known-good Debian kernel based on?
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2017-11-29 15:37 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-11-29 15:37 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Nov 29, 2017 at 03:21:40PM +0000, Will Deacon wrote:
> On Wed, Nov 29, 2017 at 03:04:12PM +0000, Alex Benn?e wrote:
> >
> > Dave Martin <Dave.Martin@arm.com> writes:
> >
> > > This series implements Linux kernel support for the ARM Scalable Vector
> > > Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> > > and full cover letter.
> > >
> > > This is a minor update to v4, but does contain a couple of important
> > > fixes.
> > <snip>
> >
> > I seem to have run into a regression with normal non-SVE sigcontexts
> > while trying to run consecutive RISU runs in the Foundation Model. I'm
> > failing to get repeatable results playing back a previous --master run.
> > It works OK with the default Debian kernel.
> >
> > What is the current status of the tree? I'd like to try an narrow it
> > down but I seem to recall it was now in a next tree somewhere?
>
> This is in mainline now, so please give a 4.15-rc1 build a spin. If there's
> a user-visible regression then we need to get to the bottom of it ASAP.
>
> Will
The other significant change was in v4.13, where the signal frame
parser rework landed.
What upstream version is your known-good Debian kernel based on?
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 15/30] arm64/sve: Signal handling support
2017-10-31 15:51 ` Dave Martin
@ 2017-12-06 19:56 ` Kees Cook
-1 siblings, 0 replies; 174+ messages in thread
From: Kees Cook @ 2017-12-06 19:56 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel, linux-arch, Okamoto Takayuki, libc-alpha,
Ard Biesheuvel, Szabolcs Nagy, Catalin Marinas, Will Deacon,
Alex Bennée, kvmarm
On Tue, Oct 31, 2017 at 8:51 AM, Dave Martin <Dave.Martin@arm.com> wrote:
> This patch implements support for saving and restoring the SVE
> registers around signals.
>
> A fixed-size header struct sve_context is always included in the
> signal frame encoding the thread's vector length at the time of
> signal delivery, optionally followed by a variable-layout structure
> encoding the SVE registers.
>
> Because of the need to preserve backwards compatibility, the FPSIMD
> view of the SVE registers is always dumped as a struct
> fpsimd_context in the usual way, in addition to any sve_context.
>
> The SVE vector registers are dumped in full, including bits 127:0
> of each register which alias the corresponding FPSIMD vector
> registers in the hardware. To avoid any ambiguity about which
> alias to restore during sigreturn, the kernel always restores bits
> 127:0 of each SVE vector register from the fpsimd_context in the
> signal frame (which must be present): userspace needs to take this
> into account if it wants to modify the SVE vector register contents
> on return from a signal.
>
> FPSR and FPCR, which are used by both FPSIMD and SVE, are not
> included in sve_context because they are always present in
> fpsimd_context anyway.
>
> For signal delivery, a new helper
> fpsimd_signal_preserve_current_state() is added to update _both_
> the FPSIMD and SVE views in the task struct, to make it easier to
> populate this information into the signal frame. Because of the
> redundancy between the two views of the state, only one is updated
> otherwise.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Cc: Alex Bennée <alex.bennee@linaro.org>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Cc: Will Deacon <will.deacon@arm.com>
>
> ---
>
> **Dropped** Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> (Non-trivial changes.)
>
> Changes since v4
> ----------------
>
> Requested by Will Deacon:
>
> * Fix inconsistent return semantics in restore_sve_fpsimd_context().
>
> Currently a nonzero return value from __copy_from_user() is passed
> back as-is to the caller or restore_sve_fpsimd_context(), rather than
> translating it do an error code as is done elsewhere.
>
> Callers of restore_sve_fpsimd_context() only care whether the return
> value is 0 or not, so this isn't a big deal, but it is more
> consistent to return proper error codes on failure in case we grow a
> use for them later.
>
> This patch returns -EFAULT in the __copy_from_user() error cases
> that weren't explicitly handled.
>
> Miscellaneous:
>
> * Change inconsistent copy_to_user() calls to __copy_to_user() in
> preserve_sve_context().
>
> There are already __put_user_error() calls here.
>
> The whole extended signal frame is already checked for
> access_ok(VERIFY_WRITE) in get_sigframe().
Verifying all these __copy_to/from_user() calls is rather non-trivial.
For example, I had to understand that the access_ok() check actually
spans memory that both user->sigframe and user->next_frame point into.
And it isn't clear to me that all users of apply_user_offset() are
within this range too, along with other manually calculated offsets in
setup_sigframe().
And it's not clear if parse_user_sigframe() is safe either. Are
user->fpsimd and user->sve checked somewhere? It seems like it's
safely contained by in sf->uc.uc_mcontext.__reserved, but it's hard to
read, though I do see access_ok() checks against __reserved at the end
of the while loop.
Can we just drop all the __... calls for the fully checked
copy_to/from_user() instead?
-Kees
--
Kees Cook
Pixel Security
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 15/30] arm64/sve: Signal handling support
@ 2017-12-06 19:56 ` Kees Cook
0 siblings, 0 replies; 174+ messages in thread
From: Kees Cook @ 2017-12-06 19:56 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Oct 31, 2017 at 8:51 AM, Dave Martin <Dave.Martin@arm.com> wrote:
> This patch implements support for saving and restoring the SVE
> registers around signals.
>
> A fixed-size header struct sve_context is always included in the
> signal frame encoding the thread's vector length at the time of
> signal delivery, optionally followed by a variable-layout structure
> encoding the SVE registers.
>
> Because of the need to preserve backwards compatibility, the FPSIMD
> view of the SVE registers is always dumped as a struct
> fpsimd_context in the usual way, in addition to any sve_context.
>
> The SVE vector registers are dumped in full, including bits 127:0
> of each register which alias the corresponding FPSIMD vector
> registers in the hardware. To avoid any ambiguity about which
> alias to restore during sigreturn, the kernel always restores bits
> 127:0 of each SVE vector register from the fpsimd_context in the
> signal frame (which must be present): userspace needs to take this
> into account if it wants to modify the SVE vector register contents
> on return from a signal.
>
> FPSR and FPCR, which are used by both FPSIMD and SVE, are not
> included in sve_context because they are always present in
> fpsimd_context anyway.
>
> For signal delivery, a new helper
> fpsimd_signal_preserve_current_state() is added to update _both_
> the FPSIMD and SVE views in the task struct, to make it easier to
> populate this information into the signal frame. Because of the
> redundancy between the two views of the state, only one is updated
> otherwise.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Cc: Alex Benn?e <alex.bennee@linaro.org>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Cc: Will Deacon <will.deacon@arm.com>
>
> ---
>
> **Dropped** Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
> (Non-trivial changes.)
>
> Changes since v4
> ----------------
>
> Requested by Will Deacon:
>
> * Fix inconsistent return semantics in restore_sve_fpsimd_context().
>
> Currently a nonzero return value from __copy_from_user() is passed
> back as-is to the caller or restore_sve_fpsimd_context(), rather than
> translating it do an error code as is done elsewhere.
>
> Callers of restore_sve_fpsimd_context() only care whether the return
> value is 0 or not, so this isn't a big deal, but it is more
> consistent to return proper error codes on failure in case we grow a
> use for them later.
>
> This patch returns -EFAULT in the __copy_from_user() error cases
> that weren't explicitly handled.
>
> Miscellaneous:
>
> * Change inconsistent copy_to_user() calls to __copy_to_user() in
> preserve_sve_context().
>
> There are already __put_user_error() calls here.
>
> The whole extended signal frame is already checked for
> access_ok(VERIFY_WRITE) in get_sigframe().
Verifying all these __copy_to/from_user() calls is rather non-trivial.
For example, I had to understand that the access_ok() check actually
spans memory that both user->sigframe and user->next_frame point into.
And it isn't clear to me that all users of apply_user_offset() are
within this range too, along with other manually calculated offsets in
setup_sigframe().
And it's not clear if parse_user_sigframe() is safe either. Are
user->fpsimd and user->sve checked somewhere? It seems like it's
safely contained by in sf->uc.uc_mcontext.__reserved, but it's hard to
read, though I do see access_ok() checks against __reserved at the end
of the while loop.
Can we just drop all the __... calls for the fully checked
copy_to/from_user() instead?
-Kees
--
Kees Cook
Pixel Security
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 15/30] arm64/sve: Signal handling support
2017-12-06 19:56 ` Kees Cook
@ 2017-12-07 10:49 ` Will Deacon
-1 siblings, 0 replies; 174+ messages in thread
From: Will Deacon @ 2017-12-07 10:49 UTC (permalink / raw)
To: Kees Cook
Cc: Dave Martin, linux-arm-kernel, linux-arch, Okamoto Takayuki,
libc-alpha, Ard Biesheuvel, Szabolcs Nagy, Catalin Marinas,
Alex Bennée, kvmarm
Hi Kees,
On Wed, Dec 06, 2017 at 11:56:50AM -0800, Kees Cook wrote:
> On Tue, Oct 31, 2017 at 8:51 AM, Dave Martin <Dave.Martin@arm.com> wrote:
> > Miscellaneous:
> >
> > * Change inconsistent copy_to_user() calls to __copy_to_user() in
> > preserve_sve_context().
> >
> > There are already __put_user_error() calls here.
> >
> > The whole extended signal frame is already checked for
> > access_ok(VERIFY_WRITE) in get_sigframe().
>
> Verifying all these __copy_to/from_user() calls is rather non-trivial.
> For example, I had to understand that the access_ok() check actually
> spans memory that both user->sigframe and user->next_frame point into.
I don't think that's particularly difficult -- you just have to read the
four lines preceding the access_ok.
> And it isn't clear to me that all users of apply_user_offset() are
> within this range too, along with other manually calculated offsets in
> setup_sigframe().
The offsets passed into apply_user_offset are calculated by
setup_sigframe_layout as the stack is allocated, so they're correct by
construction. We could add a size check in apply_user_offset if you like?
> And it's not clear if parse_user_sigframe() is safe either. Are
> user->fpsimd and user->sve checked somewhere? It seems like it's
> safely contained by in sf->uc.uc_mcontext.__reserved, but it's hard to
> read, though I do see access_ok() checks against __reserved at the end
> of the while loop.
This one is certainly more difficult to follow, mainly because it's spread
about a bit and we have to check the extra context separately. However, the
main part of the frame is checked in sys_rt_sigreturn before calling
restore_sigframe, and the extra context is checked in parse_user_sigframe
if we find it.
Dave, any thoughts on making this easier to understand?
Will
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 15/30] arm64/sve: Signal handling support
@ 2017-12-07 10:49 ` Will Deacon
0 siblings, 0 replies; 174+ messages in thread
From: Will Deacon @ 2017-12-07 10:49 UTC (permalink / raw)
To: linux-arm-kernel
Hi Kees,
On Wed, Dec 06, 2017 at 11:56:50AM -0800, Kees Cook wrote:
> On Tue, Oct 31, 2017 at 8:51 AM, Dave Martin <Dave.Martin@arm.com> wrote:
> > Miscellaneous:
> >
> > * Change inconsistent copy_to_user() calls to __copy_to_user() in
> > preserve_sve_context().
> >
> > There are already __put_user_error() calls here.
> >
> > The whole extended signal frame is already checked for
> > access_ok(VERIFY_WRITE) in get_sigframe().
>
> Verifying all these __copy_to/from_user() calls is rather non-trivial.
> For example, I had to understand that the access_ok() check actually
> spans memory that both user->sigframe and user->next_frame point into.
I don't think that's particularly difficult -- you just have to read the
four lines preceding the access_ok.
> And it isn't clear to me that all users of apply_user_offset() are
> within this range too, along with other manually calculated offsets in
> setup_sigframe().
The offsets passed into apply_user_offset are calculated by
setup_sigframe_layout as the stack is allocated, so they're correct by
construction. We could add a size check in apply_user_offset if you like?
> And it's not clear if parse_user_sigframe() is safe either. Are
> user->fpsimd and user->sve checked somewhere? It seems like it's
> safely contained by in sf->uc.uc_mcontext.__reserved, but it's hard to
> read, though I do see access_ok() checks against __reserved at the end
> of the while loop.
This one is certainly more difficult to follow, mainly because it's spread
about a bit and we have to check the extra context separately. However, the
main part of the frame is checked in sys_rt_sigreturn before calling
restore_sigframe, and the extra context is checked in parse_user_sigframe
if we find it.
Dave, any thoughts on making this easier to understand?
Will
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 15/30] arm64/sve: Signal handling support
2017-12-07 10:49 ` Will Deacon
@ 2017-12-07 12:03 ` Dave Martin
-1 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-12-07 12:03 UTC (permalink / raw)
To: Will Deacon
Cc: Kees Cook, linux-arch, Okamoto Takayuki, libc-alpha,
Ard Biesheuvel, Szabolcs Nagy, Catalin Marinas, kvmarm,
linux-arm-kernel
On Thu, Dec 07, 2017 at 10:49:48AM +0000, Will Deacon wrote:
> Hi Kees,
>
> On Wed, Dec 06, 2017 at 11:56:50AM -0800, Kees Cook wrote:
> > On Tue, Oct 31, 2017 at 8:51 AM, Dave Martin <Dave.Martin@arm.com> wrote:
> > > Miscellaneous:
> > >
> > > * Change inconsistent copy_to_user() calls to __copy_to_user() in
> > > preserve_sve_context().
> > >
> > > There are already __put_user_error() calls here.
> > >
> > > The whole extended signal frame is already checked for
> > > access_ok(VERIFY_WRITE) in get_sigframe().
> >
> > Verifying all these __copy_to/from_user() calls is rather non-trivial.
> > For example, I had to understand that the access_ok() check actually
> > spans memory that both user->sigframe and user->next_frame point into.
>
> I don't think that's particularly difficult -- you just have to read the
> four lines preceding the access_ok.
>
> > And it isn't clear to me that all users of apply_user_offset() are
> > within this range too, along with other manually calculated offsets in
> > setup_sigframe().
>
> The offsets passed into apply_user_offset are calculated by
> setup_sigframe_layout as the stack is allocated, so they're correct by
> construction. We could add a size check in apply_user_offset if you like?
Adding a BUG_ON(out of bounds) in apply_user_offset doesn't seem a
terrible idea.
> > And it's not clear if parse_user_sigframe() is safe either. Are
> > user->fpsimd and user->sve checked somewhere? It seems like it's
> > safely contained by in sf->uc.uc_mcontext.__reserved, but it's hard to
> > read, though I do see access_ok() checks against __reserved at the end
> > of the while loop.
>
> This one is certainly more difficult to follow, mainly because it's spread
> about a bit and we have to check the extra context separately. However, the
> main part of the frame is checked in sys_rt_sigreturn before calling
> restore_sigframe, and the extra context is checked in parse_user_sigframe
> if we find it.
>
> Dave, any thoughts on making this easier to understand?
I'm open to ideas myself -- I did screw this up previously with the
missing access_ok() check on the extra_context data area -- though
that wasn't catastrophic since that area is enforced to be contiguous
with the base frame which was always access_ok() checked.
During development, many essential invariants were "documented" using
BUG_ON()s. Unfortunately we don't really distinguish between marking
invariants that should be derivable from each other and from the code,
and marking things that the developer merely hopes are true (or would
rather not think about at all). Comprehensive annotation also
burdens the code with a lot of clutter...
It would be good if there were type annotations for pointers that have
passed through the access_ok() check that could be analysed by tools,
something like:
void __user __user_write_ok(base_offset, size) *p;
Such type annotations could be derived via an access_ok() check, and
taken into account by checkers examining calls to __put_user() etc.:
ultimately __put_user() might be forbidden on types lacking an
annotation with sufficient bounds.
The devil is in the detail though, and to be most useful the
annotations would need to be bindable to runtime values, not
just constants. This does not preclude static analysis, but it's
far from trivial. Has anything like this been considered in the past?
For the sigframe code, here's my rationale -- I'm happy to base
comments on it, but the more rationale is documented in comments
the higher the risk that the code will drift away from it over
time without anybody noticing...
Would you pick anything out of this as particularly critical?
The basic flow is:
Signal delivery
---------------
1. The location and size of each signal frame block is calculated
in terms of offsets from the base of the frame.
(Done by setup_sigframe_layout().)
2. The base (user) address of the frame is calculated by subtracting
the overall size of the computed frame from the initial user sp.
3. access_ok() is done on the resulting address range.
(Steps 2-3 are done by get_sigframe().)
4. The signal frame is poked using addresses derived in two ways:
a) Direct derivation from the user sp, within the bounds of the
access_ok() check in get_sigframe().
b) Addition to the sigframe base address, of offsets computed in (1);
these fall with the access_ok() range by construction due to the
way the access_ok() range is computed from those offsets in the
first place.
(b) is done by apply_user_offset(), with no further checks.
Signal return
-------------
1. The base signal frame is access_ok()'d.
(sys_rt_sigreturn())
2. Contents of the base frame is read out and processed using the
same base address and within the range that was access_ok()'d.
(restore_sigframe())
2. parse_user_sigframe() walks over its contents, picking out __user
pointers to the records found. The parse is bounded to within the
access_ok()'d size by the limit variable in parse_user_sigframe().
Only __user * pointers whose referent's full bounds fit within the
limits are picked out.
3. limit is updated only for extra_context, and only one extra_context
is allowed (policed by the have_extra_context bool).
The extension area that the extra_context block points to is
required to be contiguous with the end of the (already access_ok()'d)
sigframe. The additional space is access_ok()'d and limit updated
accordingly.
Parsing then proceeds, still bounded by limit.
4. The signal frame contents are read out and processed using pointers
derived by parse_user_sigframe().
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 15/30] arm64/sve: Signal handling support
@ 2017-12-07 12:03 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-12-07 12:03 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Dec 07, 2017 at 10:49:48AM +0000, Will Deacon wrote:
> Hi Kees,
>
> On Wed, Dec 06, 2017 at 11:56:50AM -0800, Kees Cook wrote:
> > On Tue, Oct 31, 2017 at 8:51 AM, Dave Martin <Dave.Martin@arm.com> wrote:
> > > Miscellaneous:
> > >
> > > * Change inconsistent copy_to_user() calls to __copy_to_user() in
> > > preserve_sve_context().
> > >
> > > There are already __put_user_error() calls here.
> > >
> > > The whole extended signal frame is already checked for
> > > access_ok(VERIFY_WRITE) in get_sigframe().
> >
> > Verifying all these __copy_to/from_user() calls is rather non-trivial.
> > For example, I had to understand that the access_ok() check actually
> > spans memory that both user->sigframe and user->next_frame point into.
>
> I don't think that's particularly difficult -- you just have to read the
> four lines preceding the access_ok.
>
> > And it isn't clear to me that all users of apply_user_offset() are
> > within this range too, along with other manually calculated offsets in
> > setup_sigframe().
>
> The offsets passed into apply_user_offset are calculated by
> setup_sigframe_layout as the stack is allocated, so they're correct by
> construction. We could add a size check in apply_user_offset if you like?
Adding a BUG_ON(out of bounds) in apply_user_offset doesn't seem a
terrible idea.
> > And it's not clear if parse_user_sigframe() is safe either. Are
> > user->fpsimd and user->sve checked somewhere? It seems like it's
> > safely contained by in sf->uc.uc_mcontext.__reserved, but it's hard to
> > read, though I do see access_ok() checks against __reserved at the end
> > of the while loop.
>
> This one is certainly more difficult to follow, mainly because it's spread
> about a bit and we have to check the extra context separately. However, the
> main part of the frame is checked in sys_rt_sigreturn before calling
> restore_sigframe, and the extra context is checked in parse_user_sigframe
> if we find it.
>
> Dave, any thoughts on making this easier to understand?
I'm open to ideas myself -- I did screw this up previously with the
missing access_ok() check on the extra_context data area -- though
that wasn't catastrophic since that area is enforced to be contiguous
with the base frame which was always access_ok() checked.
During development, many essential invariants were "documented" using
BUG_ON()s. Unfortunately we don't really distinguish between marking
invariants that should be derivable from each other and from the code,
and marking things that the developer merely hopes are true (or would
rather not think about at all). Comprehensive annotation also
burdens the code with a lot of clutter...
It would be good if there were type annotations for pointers that have
passed through the access_ok() check that could be analysed by tools,
something like:
void __user __user_write_ok(base_offset, size) *p;
Such type annotations could be derived via an access_ok() check, and
taken into account by checkers examining calls to __put_user() etc.:
ultimately __put_user() might be forbidden on types lacking an
annotation with sufficient bounds.
The devil is in the detail though, and to be most useful the
annotations would need to be bindable to runtime values, not
just constants. This does not preclude static analysis, but it's
far from trivial. Has anything like this been considered in the past?
For the sigframe code, here's my rationale -- I'm happy to base
comments on it, but the more rationale is documented in comments
the higher the risk that the code will drift away from it over
time without anybody noticing...
Would you pick anything out of this as particularly critical?
The basic flow is:
Signal delivery
---------------
1. The location and size of each signal frame block is calculated
in terms of offsets from the base of the frame.
(Done by setup_sigframe_layout().)
2. The base (user) address of the frame is calculated by subtracting
the overall size of the computed frame from the initial user sp.
3. access_ok() is done on the resulting address range.
(Steps 2-3 are done by get_sigframe().)
4. The signal frame is poked using addresses derived in two ways:
a) Direct derivation from the user sp, within the bounds of the
access_ok() check in get_sigframe().
b) Addition to the sigframe base address, of offsets computed in (1);
these fall with the access_ok() range by construction due to the
way the access_ok() range is computed from those offsets in the
first place.
(b) is done by apply_user_offset(), with no further checks.
Signal return
-------------
1. The base signal frame is access_ok()'d.
(sys_rt_sigreturn())
2. Contents of the base frame is read out and processed using the
same base address and within the range that was access_ok()'d.
(restore_sigframe())
2. parse_user_sigframe() walks over its contents, picking out __user
pointers to the records found. The parse is bounded to within the
access_ok()'d size by the limit variable in parse_user_sigframe().
Only __user * pointers whose referent's full bounds fit within the
limits are picked out.
3. limit is updated only for extra_context, and only one extra_context
is allowed (policed by the have_extra_context bool).
The extension area that the extra_context block points to is
required to be contiguous with the end of the (already access_ok()'d)
sigframe. The additional space is access_ok()'d and limit updated
accordingly.
Parsing then proceeds, still bounded by limit.
4. The signal frame contents are read out and processed using pointers
derived by parse_user_sigframe().
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 15/30] arm64/sve: Signal handling support
2017-12-07 10:49 ` Will Deacon
@ 2017-12-07 18:50 ` Kees Cook
-1 siblings, 0 replies; 174+ messages in thread
From: Kees Cook @ 2017-12-07 18:50 UTC (permalink / raw)
To: Will Deacon
Cc: Dave Martin, linux-arm-kernel, linux-arch, Okamoto Takayuki,
libc-alpha, Ard Biesheuvel, Szabolcs Nagy, Catalin Marinas,
Alex Bennée, kvmarm
On Thu, Dec 7, 2017 at 2:49 AM, Will Deacon <will.deacon@arm.com> wrote:
> Hi Kees,
>
> On Wed, Dec 06, 2017 at 11:56:50AM -0800, Kees Cook wrote:
>> On Tue, Oct 31, 2017 at 8:51 AM, Dave Martin <Dave.Martin@arm.com> wrote:
>> > Miscellaneous:
>> >
>> > * Change inconsistent copy_to_user() calls to __copy_to_user() in
>> > preserve_sve_context().
>> >
>> > There are already __put_user_error() calls here.
>> >
>> > The whole extended signal frame is already checked for
>> > access_ok(VERIFY_WRITE) in get_sigframe().
>>
>> Verifying all these __copy_to/from_user() calls is rather non-trivial.
>> For example, I had to understand that the access_ok() check actually
>> spans memory that both user->sigframe and user->next_frame point into.
>
> I don't think that's particularly difficult -- you just have to read the
> four lines preceding the access_ok.
Sure, but someone working backward from finding the __copy_*, it's
less obvious. :)
>> And it isn't clear to me that all users of apply_user_offset() are
>> within this range too, along with other manually calculated offsets in
>> setup_sigframe().
>
> The offsets passed into apply_user_offset are calculated by
> setup_sigframe_layout as the stack is allocated, so they're correct by
> construction. We could add a size check in apply_user_offset if you like?
>
>> And it's not clear if parse_user_sigframe() is safe either. Are
>> user->fpsimd and user->sve checked somewhere? It seems like it's
>> safely contained by in sf->uc.uc_mcontext.__reserved, but it's hard to
>> read, though I do see access_ok() checks against __reserved at the end
>> of the while loop.
>
> This one is certainly more difficult to follow, mainly because it's spread
> about a bit and we have to check the extra context separately. However, the
> main part of the frame is checked in sys_rt_sigreturn before calling
> restore_sigframe, and the extra context is checked in parse_user_sigframe
> if we find it.
>
> Dave, any thoughts on making this easier to understand?
My question is mainly: why not just use copy_*() everywhere instead?
Having these things so spread out makes it fragile, and there's very
little performance benefit from using __copy_*() over copy_*().
As far as I can see, everything looks correctly checked here, but it
took a while to convince myself of it. Having Dave's description in
the other reply certainly helped, though, thanks for that! :)
-Kees
--
Kees Cook
Pixel Security
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 15/30] arm64/sve: Signal handling support
@ 2017-12-07 18:50 ` Kees Cook
0 siblings, 0 replies; 174+ messages in thread
From: Kees Cook @ 2017-12-07 18:50 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Dec 7, 2017 at 2:49 AM, Will Deacon <will.deacon@arm.com> wrote:
> Hi Kees,
>
> On Wed, Dec 06, 2017 at 11:56:50AM -0800, Kees Cook wrote:
>> On Tue, Oct 31, 2017 at 8:51 AM, Dave Martin <Dave.Martin@arm.com> wrote:
>> > Miscellaneous:
>> >
>> > * Change inconsistent copy_to_user() calls to __copy_to_user() in
>> > preserve_sve_context().
>> >
>> > There are already __put_user_error() calls here.
>> >
>> > The whole extended signal frame is already checked for
>> > access_ok(VERIFY_WRITE) in get_sigframe().
>>
>> Verifying all these __copy_to/from_user() calls is rather non-trivial.
>> For example, I had to understand that the access_ok() check actually
>> spans memory that both user->sigframe and user->next_frame point into.
>
> I don't think that's particularly difficult -- you just have to read the
> four lines preceding the access_ok.
Sure, but someone working backward from finding the __copy_*, it's
less obvious. :)
>> And it isn't clear to me that all users of apply_user_offset() are
>> within this range too, along with other manually calculated offsets in
>> setup_sigframe().
>
> The offsets passed into apply_user_offset are calculated by
> setup_sigframe_layout as the stack is allocated, so they're correct by
> construction. We could add a size check in apply_user_offset if you like?
>
>> And it's not clear if parse_user_sigframe() is safe either. Are
>> user->fpsimd and user->sve checked somewhere? It seems like it's
>> safely contained by in sf->uc.uc_mcontext.__reserved, but it's hard to
>> read, though I do see access_ok() checks against __reserved at the end
>> of the while loop.
>
> This one is certainly more difficult to follow, mainly because it's spread
> about a bit and we have to check the extra context separately. However, the
> main part of the frame is checked in sys_rt_sigreturn before calling
> restore_sigframe, and the extra context is checked in parse_user_sigframe
> if we find it.
>
> Dave, any thoughts on making this easier to understand?
My question is mainly: why not just use copy_*() everywhere instead?
Having these things so spread out makes it fragile, and there's very
little performance benefit from using __copy_*() over copy_*().
As far as I can see, everything looks correctly checked here, but it
took a while to convince myself of it. Having Dave's description in
the other reply certainly helped, though, thanks for that! :)
-Kees
--
Kees Cook
Pixel Security
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 15/30] arm64/sve: Signal handling support
2017-12-07 18:50 ` Kees Cook
@ 2017-12-11 14:07 ` Will Deacon
-1 siblings, 0 replies; 174+ messages in thread
From: Will Deacon @ 2017-12-11 14:07 UTC (permalink / raw)
To: Kees Cook
Cc: Dave Martin, linux-arm-kernel, linux-arch, Okamoto Takayuki,
libc-alpha, Ard Biesheuvel, Szabolcs Nagy, Catalin Marinas,
Alex Bennée, kvmarm
On Thu, Dec 07, 2017 at 10:50:38AM -0800, Kees Cook wrote:
> My question is mainly: why not just use copy_*() everywhere instead?
> Having these things so spread out makes it fragile, and there's very
> little performance benefit from using __copy_*() over copy_*().
I think that's more of a general question. Why not just remove the __
versions from the kernel entirely if they're not worth the perf?
Will
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 15/30] arm64/sve: Signal handling support
@ 2017-12-11 14:07 ` Will Deacon
0 siblings, 0 replies; 174+ messages in thread
From: Will Deacon @ 2017-12-11 14:07 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Dec 07, 2017 at 10:50:38AM -0800, Kees Cook wrote:
> My question is mainly: why not just use copy_*() everywhere instead?
> Having these things so spread out makes it fragile, and there's very
> little performance benefit from using __copy_*() over copy_*().
I think that's more of a general question. Why not just remove the __
versions from the kernel entirely if they're not worth the perf?
Will
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 15/30] arm64/sve: Signal handling support
2017-12-11 14:07 ` Will Deacon
@ 2017-12-11 19:23 ` Kees Cook
-1 siblings, 0 replies; 174+ messages in thread
From: Kees Cook @ 2017-12-11 19:23 UTC (permalink / raw)
To: Will Deacon
Cc: Dave Martin, linux-arm-kernel, linux-arch, Okamoto Takayuki,
libc-alpha, Ard Biesheuvel, Szabolcs Nagy, Catalin Marinas,
Alex Bennée, kvmarm
On Mon, Dec 11, 2017 at 6:07 AM, Will Deacon <will.deacon@arm.com> wrote:
> On Thu, Dec 07, 2017 at 10:50:38AM -0800, Kees Cook wrote:
>> My question is mainly: why not just use copy_*() everywhere instead?
>> Having these things so spread out makes it fragile, and there's very
>> little performance benefit from using __copy_*() over copy_*().
>
> I think that's more of a general question. Why not just remove the __
> versions from the kernel entirely if they're not worth the perf?
That has been something Linus has strongly suggested in the past, so
I've kind of been looking for easy places to drop the __copy_*
versions. :)
-Kees
--
Kees Cook
Pixel Security
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 15/30] arm64/sve: Signal handling support
@ 2017-12-11 19:23 ` Kees Cook
0 siblings, 0 replies; 174+ messages in thread
From: Kees Cook @ 2017-12-11 19:23 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Dec 11, 2017 at 6:07 AM, Will Deacon <will.deacon@arm.com> wrote:
> On Thu, Dec 07, 2017 at 10:50:38AM -0800, Kees Cook wrote:
>> My question is mainly: why not just use copy_*() everywhere instead?
>> Having these things so spread out makes it fragile, and there's very
>> little performance benefit from using __copy_*() over copy_*().
>
> I think that's more of a general question. Why not just remove the __
> versions from the kernel entirely if they're not worth the perf?
That has been something Linus has strongly suggested in the past, so
I've kind of been looking for easy places to drop the __copy_*
versions. :)
-Kees
--
Kees Cook
Pixel Security
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 15/30] arm64/sve: Signal handling support
2017-12-11 19:23 ` Kees Cook
@ 2017-12-12 10:40 ` Will Deacon
-1 siblings, 0 replies; 174+ messages in thread
From: Will Deacon @ 2017-12-12 10:40 UTC (permalink / raw)
To: Kees Cook
Cc: Dave Martin, linux-arm-kernel, linux-arch, Okamoto Takayuki,
libc-alpha, Ard Biesheuvel, Szabolcs Nagy, Catalin Marinas,
Alex Bennée, kvmarm
On Mon, Dec 11, 2017 at 11:23:09AM -0800, Kees Cook wrote:
> On Mon, Dec 11, 2017 at 6:07 AM, Will Deacon <will.deacon@arm.com> wrote:
> > On Thu, Dec 07, 2017 at 10:50:38AM -0800, Kees Cook wrote:
> >> My question is mainly: why not just use copy_*() everywhere instead?
> >> Having these things so spread out makes it fragile, and there's very
> >> little performance benefit from using __copy_*() over copy_*().
> >
> > I think that's more of a general question. Why not just remove the __
> > versions from the kernel entirely if they're not worth the perf?
>
> That has been something Linus has strongly suggested in the past, so
> I've kind of been looking for easy places to drop the __copy_*
> versions. :)
Tell you what then: I'll Ack the arm64 patch if it's part of a series
removing the thing entirely :p
I guess we'd still want to the validation of the whole sigframe though,
so we don't end up pushing half a signal stack before running into an
access_ok failure?
Will
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 15/30] arm64/sve: Signal handling support
@ 2017-12-12 10:40 ` Will Deacon
0 siblings, 0 replies; 174+ messages in thread
From: Will Deacon @ 2017-12-12 10:40 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Dec 11, 2017 at 11:23:09AM -0800, Kees Cook wrote:
> On Mon, Dec 11, 2017 at 6:07 AM, Will Deacon <will.deacon@arm.com> wrote:
> > On Thu, Dec 07, 2017 at 10:50:38AM -0800, Kees Cook wrote:
> >> My question is mainly: why not just use copy_*() everywhere instead?
> >> Having these things so spread out makes it fragile, and there's very
> >> little performance benefit from using __copy_*() over copy_*().
> >
> > I think that's more of a general question. Why not just remove the __
> > versions from the kernel entirely if they're not worth the perf?
>
> That has been something Linus has strongly suggested in the past, so
> I've kind of been looking for easy places to drop the __copy_*
> versions. :)
Tell you what then: I'll Ack the arm64 patch if it's part of a series
removing the thing entirely :p
I guess we'd still want to the validation of the whole sigframe though,
so we don't end up pushing half a signal stack before running into an
access_ok failure?
Will
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 15/30] arm64/sve: Signal handling support
2017-12-12 10:40 ` Will Deacon
@ 2017-12-12 11:11 ` Dave Martin
-1 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-12-12 11:11 UTC (permalink / raw)
To: Will Deacon
Cc: Kees Cook, linux-arch, Okamoto Takayuki, libc-alpha,
Ard Biesheuvel, Szabolcs Nagy, Catalin Marinas, kvmarm,
linux-arm-kernel
On Tue, Dec 12, 2017 at 10:40:30AM +0000, Will Deacon wrote:
> On Mon, Dec 11, 2017 at 11:23:09AM -0800, Kees Cook wrote:
> > On Mon, Dec 11, 2017 at 6:07 AM, Will Deacon <will.deacon@arm.com> wrote:
> > > On Thu, Dec 07, 2017 at 10:50:38AM -0800, Kees Cook wrote:
> > >> My question is mainly: why not just use copy_*() everywhere instead?
> > >> Having these things so spread out makes it fragile, and there's very
> > >> little performance benefit from using __copy_*() over copy_*().
> > >
> > > I think that's more of a general question. Why not just remove the __
> > > versions from the kernel entirely if they're not worth the perf?
> >
> > That has been something Linus has strongly suggested in the past, so
> > I've kind of been looking for easy places to drop the __copy_*
> > versions. :)
>
> Tell you what then: I'll Ack the arm64 patch if it's part of a series
> removing the thing entirely :p
>
> I guess we'd still want to the validation of the whole sigframe though,
> so we don't end up pushing half a signal stack before running into an
> access_ok failure?
That's an interesting question. In many cases access_ok() might become
redundant, but for syscalls that you don't want to have side-effects
on user memory on failure it's still relevant.
In the signal case we'd still an encompassing access_ok() to prevent
stack guard overruns, because the signal frame can be large and isn't
written or read contiguously or in a well-defined order.
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 15/30] arm64/sve: Signal handling support
@ 2017-12-12 11:11 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2017-12-12 11:11 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Dec 12, 2017 at 10:40:30AM +0000, Will Deacon wrote:
> On Mon, Dec 11, 2017 at 11:23:09AM -0800, Kees Cook wrote:
> > On Mon, Dec 11, 2017 at 6:07 AM, Will Deacon <will.deacon@arm.com> wrote:
> > > On Thu, Dec 07, 2017 at 10:50:38AM -0800, Kees Cook wrote:
> > >> My question is mainly: why not just use copy_*() everywhere instead?
> > >> Having these things so spread out makes it fragile, and there's very
> > >> little performance benefit from using __copy_*() over copy_*().
> > >
> > > I think that's more of a general question. Why not just remove the __
> > > versions from the kernel entirely if they're not worth the perf?
> >
> > That has been something Linus has strongly suggested in the past, so
> > I've kind of been looking for easy places to drop the __copy_*
> > versions. :)
>
> Tell you what then: I'll Ack the arm64 patch if it's part of a series
> removing the thing entirely :p
>
> I guess we'd still want to the validation of the whole sigframe though,
> so we don't end up pushing half a signal stack before running into an
> access_ok failure?
That's an interesting question. In many cases access_ok() might become
redundant, but for syscalls that you don't want to have side-effects
on user memory on failure it's still relevant.
In the signal case we'd still an encompassing access_ok() to prevent
stack guard overruns, because the signal frame can be large and isn't
written or read contiguously or in a well-defined order.
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 15/30] arm64/sve: Signal handling support
@ 2017-12-12 19:36 ` Kees Cook
0 siblings, 0 replies; 174+ messages in thread
From: Kees Cook @ 2017-12-12 19:36 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arch, Okamoto Takayuki, libc-alpha, Ard Biesheuvel,
Szabolcs Nagy, Catalin Marinas, Will Deacon, kvmarm,
linux-arm-kernel
On Tue, Dec 12, 2017 at 3:11 AM, Dave Martin <Dave.Martin@arm.com> wrote:
> On Tue, Dec 12, 2017 at 10:40:30AM +0000, Will Deacon wrote:
>> On Mon, Dec 11, 2017 at 11:23:09AM -0800, Kees Cook wrote:
>> > On Mon, Dec 11, 2017 at 6:07 AM, Will Deacon <will.deacon@arm.com> wrote:
>> > > On Thu, Dec 07, 2017 at 10:50:38AM -0800, Kees Cook wrote:
>> > >> My question is mainly: why not just use copy_*() everywhere instead?
>> > >> Having these things so spread out makes it fragile, and there's very
>> > >> little performance benefit from using __copy_*() over copy_*().
>> > >
>> > > I think that's more of a general question. Why not just remove the __
>> > > versions from the kernel entirely if they're not worth the perf?
>> >
>> > That has been something Linus has strongly suggested in the past, so
>> > I've kind of been looking for easy places to drop the __copy_*
>> > versions. :)
>>
>> Tell you what then: I'll Ack the arm64 patch if it's part of a series
>> removing the thing entirely :p
>>
>> I guess we'd still want to the validation of the whole sigframe though,
>> so we don't end up pushing half a signal stack before running into an
>> access_ok failure?
>
> That's an interesting question. In many cases access_ok() might become
> redundant, but for syscalls that you don't want to have side-effects
> on user memory on failure it's still relevant.
>
> In the signal case we'd still an encompassing access_ok() to prevent
> stack guard overruns, because the signal frame can be large and isn't
> written or read contiguously or in a well-defined order.
Yeah, I think bailing early is fine. I think the existing access_ok()
checks are fine; I wouldn't want to drop those.
-Kees
--
Kees Cook
Pixel Security
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 15/30] arm64/sve: Signal handling support
@ 2017-12-12 19:36 ` Kees Cook
0 siblings, 0 replies; 174+ messages in thread
From: Kees Cook @ 2017-12-12 19:36 UTC (permalink / raw)
To: Dave Martin
Cc: Will Deacon, linux-arch, Okamoto Takayuki, libc-alpha,
Ard Biesheuvel, Szabolcs Nagy, Catalin Marinas, kvmarm,
linux-arm-kernel
On Tue, Dec 12, 2017 at 3:11 AM, Dave Martin <Dave.Martin@arm.com> wrote:
> On Tue, Dec 12, 2017 at 10:40:30AM +0000, Will Deacon wrote:
>> On Mon, Dec 11, 2017 at 11:23:09AM -0800, Kees Cook wrote:
>> > On Mon, Dec 11, 2017 at 6:07 AM, Will Deacon <will.deacon@arm.com> wrote:
>> > > On Thu, Dec 07, 2017 at 10:50:38AM -0800, Kees Cook wrote:
>> > >> My question is mainly: why not just use copy_*() everywhere instead?
>> > >> Having these things so spread out makes it fragile, and there's very
>> > >> little performance benefit from using __copy_*() over copy_*().
>> > >
>> > > I think that's more of a general question. Why not just remove the __
>> > > versions from the kernel entirely if they're not worth the perf?
>> >
>> > That has been something Linus has strongly suggested in the past, so
>> > I've kind of been looking for easy places to drop the __copy_*
>> > versions. :)
>>
>> Tell you what then: I'll Ack the arm64 patch if it's part of a series
>> removing the thing entirely :p
>>
>> I guess we'd still want to the validation of the whole sigframe though,
>> so we don't end up pushing half a signal stack before running into an
>> access_ok failure?
>
> That's an interesting question. In many cases access_ok() might become
> redundant, but for syscalls that you don't want to have side-effects
> on user memory on failure it's still relevant.
>
> In the signal case we'd still an encompassing access_ok() to prevent
> stack guard overruns, because the signal frame can be large and isn't
> written or read contiguously or in a well-defined order.
Yeah, I think bailing early is fine. I think the existing access_ok()
checks are fine; I wouldn't want to drop those.
-Kees
--
Kees Cook
Pixel Security
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 15/30] arm64/sve: Signal handling support
@ 2017-12-12 19:36 ` Kees Cook
0 siblings, 0 replies; 174+ messages in thread
From: Kees Cook @ 2017-12-12 19:36 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Dec 12, 2017 at 3:11 AM, Dave Martin <Dave.Martin@arm.com> wrote:
> On Tue, Dec 12, 2017 at 10:40:30AM +0000, Will Deacon wrote:
>> On Mon, Dec 11, 2017 at 11:23:09AM -0800, Kees Cook wrote:
>> > On Mon, Dec 11, 2017 at 6:07 AM, Will Deacon <will.deacon@arm.com> wrote:
>> > > On Thu, Dec 07, 2017 at 10:50:38AM -0800, Kees Cook wrote:
>> > >> My question is mainly: why not just use copy_*() everywhere instead?
>> > >> Having these things so spread out makes it fragile, and there's very
>> > >> little performance benefit from using __copy_*() over copy_*().
>> > >
>> > > I think that's more of a general question. Why not just remove the __
>> > > versions from the kernel entirely if they're not worth the perf?
>> >
>> > That has been something Linus has strongly suggested in the past, so
>> > I've kind of been looking for easy places to drop the __copy_*
>> > versions. :)
>>
>> Tell you what then: I'll Ack the arm64 patch if it's part of a series
>> removing the thing entirely :p
>>
>> I guess we'd still want to the validation of the whole sigframe though,
>> so we don't end up pushing half a signal stack before running into an
>> access_ok failure?
>
> That's an interesting question. In many cases access_ok() might become
> redundant, but for syscalls that you don't want to have side-effects
> on user memory on failure it's still relevant.
>
> In the signal case we'd still an encompassing access_ok() to prevent
> stack guard overruns, because the signal frame can be large and isn't
> written or read contiguously or in a well-defined order.
Yeah, I think bailing early is fine. I think the existing access_ok()
checks are fine; I wouldn't want to drop those.
-Kees
--
Kees Cook
Pixel Security
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2018-01-08 14:49 ` Yury Norov
0 siblings, 0 replies; 174+ messages in thread
From: Yury Norov @ 2018-01-08 14:49 UTC (permalink / raw)
To: Dave Martin
Cc: Okamoto Takayuki, Szabolcs Nagy, Catalin Marinas, Will Deacon,
H. Peter Anvin, kvmarm, linux-arch, Ingo Molnar, Michael Kerrisk,
Alan Hayward, H . J . Lu, Alexander Viro, Thomas Gleixner,
linux-arm-kernel, libc-alpha, Ard Biesheuvel, Dmitry Safonov,
Oleg Nesterov, linux-api
On Tue, Oct 31, 2017 at 03:50:52PM +0000, Dave Martin wrote:
> This series implements Linux kernel support for the ARM Scalable Vector
> Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> and full cover letter.
>
> This is a minor update to v4, but does contain a couple of important
> fixes.
>
> As in previous postings, the last two patches (here 29-30) are still
> RFC and not proposed for merging at this time.
>
> The patches apply on
> git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git
> for-next/core
> d7b1d22d3821 ("arm64: uapi: Remove PSR_Q_BIT")
>
> To reduce spam, some people may not been copied on the entire series.
> For those who did not receive the whole series, it can be found in the
> linux-arm-kernel archive. [2]
>
> See the individual patches for details of changes.
>
> For reviewer convenience, a git tree is available. [4]
>
> Since there are some changes against already-reviewed patches, I've also
> pushed an unsquashed fixes tree for people to take a look at if it
> helps. [5]
>
>
> Summary:
>
> * "regset: Add support for dynamically sized regsets" fixed to avoid
> x86 breakage;
>
> * one trival arm64 patch added to add asmlinkage annotations, and a
> corresponding minor change to the Core task context handling patch;
>
> * one new arm64 fix ("signal: Verify extra data is user-readable in
> sys_rt_sigreturn") to ensure that access_ok() checks are done for the
> whole extended signal frame, not just the base frame;
>
> * one minor fix to the SVE sigreturn code to return consistent
> intermediate error values (semantic correctness, non-functional
> change);
>
> * one minor change to call __copy_from_user() instead of
> copy_from_user() in a situation where there is already an access_ok()
> check;
>
>
> [1] ARM Scalable Vector Extension
> https://community.arm.com/groups/processors/blog/2016/08/22/technology-update-the-scalable-vector-extension-sve-for-the-armv8-a-architecture
>
> [2] linux-arm-kernel October 2017 Archives by thread
> http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/thread.html
>
> [3] [PATCH v4 00/28] ARM Scalable Vector Extension (SVE)
> http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/539414.html
>
> [4] For review and testing only -- **do not pull**
> (This branch has review changelogs which should not form part of
> the final commits.)
>
> v5 series (this posting)
>
> http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v5
> git://linux-arm.org/linux-dm.git sve/v5
>
> [5] For review and testing only -- **do not pull**
> (This branch has review changelogs which should not form part of
> the final commits.)
>
> v4 with unsquashed fixes
>
> http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v4%2Bfixes
> git://linux-arm.org/linux-dm.git sve/v4+fixes
Hi Dave,
During rebase of my ILP32 series on 4.15 kernel I found that
ILP32 needs to be enabled with SVE support, like you do for
LP64 in this series.
I did all rebase work on this draft branch:
https://github.com/norov/linux/tree/ilp32-4.15-rc7
But any ILP32 program I tried crash, and the message in dmesg looks
like this:
[ 39.510667] CPU: 0 PID: 1857 Comm: mytime Not tainted 4.15.0-rc7-00028-g45e0659df4d9 #41
[ 39.510712] Hardware name: linux,dummy-virt (DT)
[ 39.510829] pstate: 00000000 (nzcv daif -PAN -UAO)
[ 39.511101] pc : 0x33488e28
[ 39.511125] lr : 0x33488e28
[ 39.511138] sp : 00000000fffef670
[ 39.511158] x29: 000000005a536c33 x28: 0000000000000000
[ 39.511211] x27: 0000000000000000 x26: 0000000000000000
[ 39.511235] x25: 0000000000000000 x24: 0000000000000000
[ 39.511257] x23: 0000000000466000 x22: 0000000000000000
[ 39.511278] x21: 0000000000000000 x20: 000000000047f2a8
[ 39.511300] x19: 0000000000000000 x18: 0000000000000001
[ 39.511321] x17: 0000000000001000 x16: 0000000000001030
[ 39.511342] x15: 0000000000554e47 x14: 0000000000000001
[ 39.511364] x13: 0000000000000004 x12: 000000000000003c
[ 39.511385] x11: 0000100000000000 x10: 0800000000000000
[ 39.511406] x9 : 0fffffffffffffff x8 : 000000000000007c
[ 39.511427] x7 : 0000000000000077 x6 : 0000000000000041
[ 39.511448] x5 : 0000000000000411 x4 : 00000000fbad2488
[ 39.511468] x3 : 0000000000000001 x2 : 0000000000497950
[ 39.511489] x1 : 0000000000497550 x0 : 0000000000000001
(PC, LR and other registers may differ depending on test)
I'm pretty sure that this is SVE-related issue because if I disable
ARM64_SVE in config, everything becomes working.
I didn't get deep enough into this yet, and most probably there's
some stupid reason for crashing apps on my side, but in mail list
I found some sve-related patches that I cannot apply both on 4.15-rc
and next-20180108. And according to patch names, it is important
fixes, like this one:
https://www.spinics.net/lists/arm-kernel/msg619548.html
ILP32 code may spit some kernel issues from time to time, so there's
minor chance that the problem is not in ILP32 itself - that's why I
write this email to you.
What I want to ask you, do you have some branch with the most recent
SVE code that includes all fixes? Better if it would be 4.15-based
series, because we don't support ILP32 on next-* kernels now.
Also, if you have few minutes to take look at my series, I would
kindly ask you do this, because I still think that this is my
misunderstanding of how SVE should work for ILP32, and you as author
may just catch the bug at a glance.
Thanks,
Yury
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2018-01-08 14:49 ` Yury Norov
0 siblings, 0 replies; 174+ messages in thread
From: Yury Norov @ 2018-01-08 14:49 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel, linux-arch, Mark Rutland, Okamoto Takayuki,
libc-alpha, Ard Biesheuvel, Szabolcs Nagy, Catalin Marinas,
H . J . Lu, H. Peter Anvin, Will Deacon, Oleg Nesterov,
Dmitry Safonov, Ingo Molnar, Alexander Viro, Alan Hayward,
Thomas Gleixner, linux-api, Alex Bennée, kvmarm,
Christoffer Dall, Michael Kerrisk
On Tue, Oct 31, 2017 at 03:50:52PM +0000, Dave Martin wrote:
> This series implements Linux kernel support for the ARM Scalable Vector
> Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> and full cover letter.
>
> This is a minor update to v4, but does contain a couple of important
> fixes.
>
> As in previous postings, the last two patches (here 29-30) are still
> RFC and not proposed for merging at this time.
>
> The patches apply on
> git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git
> for-next/core
> d7b1d22d3821 ("arm64: uapi: Remove PSR_Q_BIT")
>
> To reduce spam, some people may not been copied on the entire series.
> For those who did not receive the whole series, it can be found in the
> linux-arm-kernel archive. [2]
>
> See the individual patches for details of changes.
>
> For reviewer convenience, a git tree is available. [4]
>
> Since there are some changes against already-reviewed patches, I've also
> pushed an unsquashed fixes tree for people to take a look at if it
> helps. [5]
>
>
> Summary:
>
> * "regset: Add support for dynamically sized regsets" fixed to avoid
> x86 breakage;
>
> * one trival arm64 patch added to add asmlinkage annotations, and a
> corresponding minor change to the Core task context handling patch;
>
> * one new arm64 fix ("signal: Verify extra data is user-readable in
> sys_rt_sigreturn") to ensure that access_ok() checks are done for the
> whole extended signal frame, not just the base frame;
>
> * one minor fix to the SVE sigreturn code to return consistent
> intermediate error values (semantic correctness, non-functional
> change);
>
> * one minor change to call __copy_from_user() instead of
> copy_from_user() in a situation where there is already an access_ok()
> check;
>
>
> [1] ARM Scalable Vector Extension
> https://community.arm.com/groups/processors/blog/2016/08/22/technology-update-the-scalable-vector-extension-sve-for-the-armv8-a-architecture
>
> [2] linux-arm-kernel October 2017 Archives by thread
> http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/thread.html
>
> [3] [PATCH v4 00/28] ARM Scalable Vector Extension (SVE)
> http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/539414.html
>
> [4] For review and testing only -- **do not pull**
> (This branch has review changelogs which should not form part of
> the final commits.)
>
> v5 series (this posting)
>
> http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v5
> git://linux-arm.org/linux-dm.git sve/v5
>
> [5] For review and testing only -- **do not pull**
> (This branch has review changelogs which should not form part of
> the final commits.)
>
> v4 with unsquashed fixes
>
> http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v4%2Bfixes
> git://linux-arm.org/linux-dm.git sve/v4+fixes
Hi Dave,
During rebase of my ILP32 series on 4.15 kernel I found that
ILP32 needs to be enabled with SVE support, like you do for
LP64 in this series.
I did all rebase work on this draft branch:
https://github.com/norov/linux/tree/ilp32-4.15-rc7
But any ILP32 program I tried crash, and the message in dmesg looks
like this:
[ 39.510667] CPU: 0 PID: 1857 Comm: mytime Not tainted 4.15.0-rc7-00028-g45e0659df4d9 #41
[ 39.510712] Hardware name: linux,dummy-virt (DT)
[ 39.510829] pstate: 00000000 (nzcv daif -PAN -UAO)
[ 39.511101] pc : 0x33488e28
[ 39.511125] lr : 0x33488e28
[ 39.511138] sp : 00000000fffef670
[ 39.511158] x29: 000000005a536c33 x28: 0000000000000000
[ 39.511211] x27: 0000000000000000 x26: 0000000000000000
[ 39.511235] x25: 0000000000000000 x24: 0000000000000000
[ 39.511257] x23: 0000000000466000 x22: 0000000000000000
[ 39.511278] x21: 0000000000000000 x20: 000000000047f2a8
[ 39.511300] x19: 0000000000000000 x18: 0000000000000001
[ 39.511321] x17: 0000000000001000 x16: 0000000000001030
[ 39.511342] x15: 0000000000554e47 x14: 0000000000000001
[ 39.511364] x13: 0000000000000004 x12: 000000000000003c
[ 39.511385] x11: 0000100000000000 x10: 0800000000000000
[ 39.511406] x9 : 0fffffffffffffff x8 : 000000000000007c
[ 39.511427] x7 : 0000000000000077 x6 : 0000000000000041
[ 39.511448] x5 : 0000000000000411 x4 : 00000000fbad2488
[ 39.511468] x3 : 0000000000000001 x2 : 0000000000497950
[ 39.511489] x1 : 0000000000497550 x0 : 0000000000000001
(PC, LR and other registers may differ depending on test)
I'm pretty sure that this is SVE-related issue because if I disable
ARM64_SVE in config, everything becomes working.
I didn't get deep enough into this yet, and most probably there's
some stupid reason for crashing apps on my side, but in mail list
I found some sve-related patches that I cannot apply both on 4.15-rc
and next-20180108. And according to patch names, it is important
fixes, like this one:
https://www.spinics.net/lists/arm-kernel/msg619548.html
ILP32 code may spit some kernel issues from time to time, so there's
minor chance that the problem is not in ILP32 itself - that's why I
write this email to you.
What I want to ask you, do you have some branch with the most recent
SVE code that includes all fixes? Better if it would be 4.15-based
series, because we don't support ILP32 on next-* kernels now.
Also, if you have few minutes to take look at my series, I would
kindly ask you do this, because I still think that this is my
misunderstanding of how SVE should work for ILP32, and you as author
may just catch the bug at a glance.
Thanks,
Yury
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2018-01-08 14:49 ` Yury Norov
0 siblings, 0 replies; 174+ messages in thread
From: Yury Norov @ 2018-01-08 14:49 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Oct 31, 2017 at 03:50:52PM +0000, Dave Martin wrote:
> This series implements Linux kernel support for the ARM Scalable Vector
> Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> and full cover letter.
>
> This is a minor update to v4, but does contain a couple of important
> fixes.
>
> As in previous postings, the last two patches (here 29-30) are still
> RFC and not proposed for merging at this time.
>
> The patches apply on
> git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git
> for-next/core
> d7b1d22d3821 ("arm64: uapi: Remove PSR_Q_BIT")
>
> To reduce spam, some people may not been copied on the entire series.
> For those who did not receive the whole series, it can be found in the
> linux-arm-kernel archive. [2]
>
> See the individual patches for details of changes.
>
> For reviewer convenience, a git tree is available. [4]
>
> Since there are some changes against already-reviewed patches, I've also
> pushed an unsquashed fixes tree for people to take a look at if it
> helps. [5]
>
>
> Summary:
>
> * "regset: Add support for dynamically sized regsets" fixed to avoid
> x86 breakage;
>
> * one trival arm64 patch added to add asmlinkage annotations, and a
> corresponding minor change to the Core task context handling patch;
>
> * one new arm64 fix ("signal: Verify extra data is user-readable in
> sys_rt_sigreturn") to ensure that access_ok() checks are done for the
> whole extended signal frame, not just the base frame;
>
> * one minor fix to the SVE sigreturn code to return consistent
> intermediate error values (semantic correctness, non-functional
> change);
>
> * one minor change to call __copy_from_user() instead of
> copy_from_user() in a situation where there is already an access_ok()
> check;
>
>
> [1] ARM Scalable Vector Extension
> https://community.arm.com/groups/processors/blog/2016/08/22/technology-update-the-scalable-vector-extension-sve-for-the-armv8-a-architecture
>
> [2] linux-arm-kernel October 2017 Archives by thread
> http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/thread.html
>
> [3] [PATCH v4 00/28] ARM Scalable Vector Extension (SVE)
> http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/539414.html
>
> [4] For review and testing only -- **do not pull**
> (This branch has review changelogs which should not form part of
> the final commits.)
>
> v5 series (this posting)
>
> http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v5
> git://linux-arm.org/linux-dm.git sve/v5
>
> [5] For review and testing only -- **do not pull**
> (This branch has review changelogs which should not form part of
> the final commits.)
>
> v4 with unsquashed fixes
>
> http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v4%2Bfixes
> git://linux-arm.org/linux-dm.git sve/v4+fixes
Hi Dave,
During rebase of my ILP32 series on 4.15 kernel I found that
ILP32 needs to be enabled with SVE support, like you do for
LP64 in this series.
I did all rebase work on this draft branch:
https://github.com/norov/linux/tree/ilp32-4.15-rc7
But any ILP32 program I tried crash, and the message in dmesg looks
like this:
[ 39.510667] CPU: 0 PID: 1857 Comm: mytime Not tainted 4.15.0-rc7-00028-g45e0659df4d9 #41
[ 39.510712] Hardware name: linux,dummy-virt (DT)
[ 39.510829] pstate: 00000000 (nzcv daif -PAN -UAO)
[ 39.511101] pc : 0x33488e28
[ 39.511125] lr : 0x33488e28
[ 39.511138] sp : 00000000fffef670
[ 39.511158] x29: 000000005a536c33 x28: 0000000000000000
[ 39.511211] x27: 0000000000000000 x26: 0000000000000000
[ 39.511235] x25: 0000000000000000 x24: 0000000000000000
[ 39.511257] x23: 0000000000466000 x22: 0000000000000000
[ 39.511278] x21: 0000000000000000 x20: 000000000047f2a8
[ 39.511300] x19: 0000000000000000 x18: 0000000000000001
[ 39.511321] x17: 0000000000001000 x16: 0000000000001030
[ 39.511342] x15: 0000000000554e47 x14: 0000000000000001
[ 39.511364] x13: 0000000000000004 x12: 000000000000003c
[ 39.511385] x11: 0000100000000000 x10: 0800000000000000
[ 39.511406] x9 : 0fffffffffffffff x8 : 000000000000007c
[ 39.511427] x7 : 0000000000000077 x6 : 0000000000000041
[ 39.511448] x5 : 0000000000000411 x4 : 00000000fbad2488
[ 39.511468] x3 : 0000000000000001 x2 : 0000000000497950
[ 39.511489] x1 : 0000000000497550 x0 : 0000000000000001
(PC, LR and other registers may differ depending on test)
I'm pretty sure that this is SVE-related issue because if I disable
ARM64_SVE in config, everything becomes working.
I didn't get deep enough into this yet, and most probably there's
some stupid reason for crashing apps on my side, but in mail list
I found some sve-related patches that I cannot apply both on 4.15-rc
and next-20180108. And according to patch names, it is important
fixes, like this one:
https://www.spinics.net/lists/arm-kernel/msg619548.html
ILP32 code may spit some kernel issues from time to time, so there's
minor chance that the problem is not in ILP32 itself - that's why I
write this email to you.
What I want to ask you, do you have some branch with the most recent
SVE code that includes all fixes? Better if it would be 4.15-based
series, because we don't support ILP32 on next-* kernels now.
Also, if you have few minutes to take look at my series, I would
kindly ask you do this, because I still think that this is my
misunderstanding of how SVE should work for ILP32, and you as author
may just catch the bug at a glance.
Thanks,
Yury
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2018-01-09 16:51 ` Yury Norov
0 siblings, 0 replies; 174+ messages in thread
From: Yury Norov @ 2018-01-09 16:51 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel, linux-arch, Mark Rutland, Okamoto Takayuki,
libc-alpha, Ard Biesheuvel, Szabolcs Nagy, Catalin Marinas,
H . J . Lu, H. Peter Anvin, Will Deacon, Oleg Nesterov,
Dmitry Safonov, Ingo Molnar, Alexander Viro, Alan Hayward,
Thomas Gleixner, linux-api, Alex Bennée, kvmarm
On Mon, Jan 08, 2018 at 05:49:05PM +0300, Yury Norov wrote:
> On Tue, Oct 31, 2017 at 03:50:52PM +0000, Dave Martin wrote:
> > This series implements Linux kernel support for the ARM Scalable Vector
> > Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> > and full cover letter.
> >
> > This is a minor update to v4, but does contain a couple of important
> > fixes.
> >
> > As in previous postings, the last two patches (here 29-30) are still
> > RFC and not proposed for merging at this time.
> >
> > The patches apply on
> > git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git
> > for-next/core
> > d7b1d22d3821 ("arm64: uapi: Remove PSR_Q_BIT")
> >
> > To reduce spam, some people may not been copied on the entire series.
> > For those who did not receive the whole series, it can be found in the
> > linux-arm-kernel archive. [2]
> >
> > See the individual patches for details of changes.
> >
> > For reviewer convenience, a git tree is available. [4]
> >
> > Since there are some changes against already-reviewed patches, I've also
> > pushed an unsquashed fixes tree for people to take a look at if it
> > helps. [5]
> >
> >
> > Summary:
> >
> > * "regset: Add support for dynamically sized regsets" fixed to avoid
> > x86 breakage;
> >
> > * one trival arm64 patch added to add asmlinkage annotations, and a
> > corresponding minor change to the Core task context handling patch;
> >
> > * one new arm64 fix ("signal: Verify extra data is user-readable in
> > sys_rt_sigreturn") to ensure that access_ok() checks are done for the
> > whole extended signal frame, not just the base frame;
> >
> > * one minor fix to the SVE sigreturn code to return consistent
> > intermediate error values (semantic correctness, non-functional
> > change);
> >
> > * one minor change to call __copy_from_user() instead of
> > copy_from_user() in a situation where there is already an access_ok()
> > check;
> >
> >
> > [1] ARM Scalable Vector Extension
> > https://community.arm.com/groups/processors/blog/2016/08/22/technology-update-the-scalable-vector-extension-sve-for-the-armv8-a-architecture
> >
> > [2] linux-arm-kernel October 2017 Archives by thread
> > http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/thread.html
> >
> > [3] [PATCH v4 00/28] ARM Scalable Vector Extension (SVE)
> > http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/539414.html
> >
> > [4] For review and testing only -- **do not pull**
> > (This branch has review changelogs which should not form part of
> > the final commits.)
> >
> > v5 series (this posting)
> >
> > http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v5
> > git://linux-arm.org/linux-dm.git sve/v5
> >
> > [5] For review and testing only -- **do not pull**
> > (This branch has review changelogs which should not form part of
> > the final commits.)
> >
> > v4 with unsquashed fixes
> >
> > http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v4%2Bfixes
> > git://linux-arm.org/linux-dm.git sve/v4+fixes
>
> Hi Dave,
>
> During rebase of my ILP32 series on 4.15 kernel I found that
> ILP32 needs to be enabled with SVE support, like you do for
> LP64 in this series.
>
> I did all rebase work on this draft branch:
> https://github.com/norov/linux/tree/ilp32-4.15-rc7
>
> But any ILP32 program I tried crash, and the message in dmesg looks
> like this:
> [ 39.510667] CPU: 0 PID: 1857 Comm: mytime Not tainted 4.15.0-rc7-00028-g45e0659df4d9 #41
> [ 39.510712] Hardware name: linux,dummy-virt (DT)
> [ 39.510829] pstate: 00000000 (nzcv daif -PAN -UAO)
> [ 39.511101] pc : 0x33488e28
> [ 39.511125] lr : 0x33488e28
> [ 39.511138] sp : 00000000fffef670
> [ 39.511158] x29: 000000005a536c33 x28: 0000000000000000
> [ 39.511211] x27: 0000000000000000 x26: 0000000000000000
> [ 39.511235] x25: 0000000000000000 x24: 0000000000000000
> [ 39.511257] x23: 0000000000466000 x22: 0000000000000000
> [ 39.511278] x21: 0000000000000000 x20: 000000000047f2a8
> [ 39.511300] x19: 0000000000000000 x18: 0000000000000001
> [ 39.511321] x17: 0000000000001000 x16: 0000000000001030
> [ 39.511342] x15: 0000000000554e47 x14: 0000000000000001
> [ 39.511364] x13: 0000000000000004 x12: 000000000000003c
> [ 39.511385] x11: 0000100000000000 x10: 0800000000000000
> [ 39.511406] x9 : 0fffffffffffffff x8 : 000000000000007c
> [ 39.511427] x7 : 0000000000000077 x6 : 0000000000000041
> [ 39.511448] x5 : 0000000000000411 x4 : 00000000fbad2488
> [ 39.511468] x3 : 0000000000000001 x2 : 0000000000497950
> [ 39.511489] x1 : 0000000000497550 x0 : 0000000000000001
Hi Dave,
I fixed the crash. It was my local problem.
Thanks,
Yury
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2018-01-09 16:51 ` Yury Norov
0 siblings, 0 replies; 174+ messages in thread
From: Yury Norov @ 2018-01-09 16:51 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel, linux-arch, Mark Rutland, Okamoto Takayuki,
libc-alpha, Ard Biesheuvel, Szabolcs Nagy, Catalin Marinas,
H . J . Lu, H. Peter Anvin, Will Deacon, Oleg Nesterov,
Dmitry Safonov, Ingo Molnar, Alexander Viro, Alan Hayward,
Thomas Gleixner, linux-api, Alex Bennée, kvmarm,
Christoffer Dall, Michael Kerrisk
On Mon, Jan 08, 2018 at 05:49:05PM +0300, Yury Norov wrote:
> On Tue, Oct 31, 2017 at 03:50:52PM +0000, Dave Martin wrote:
> > This series implements Linux kernel support for the ARM Scalable Vector
> > Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> > and full cover letter.
> >
> > This is a minor update to v4, but does contain a couple of important
> > fixes.
> >
> > As in previous postings, the last two patches (here 29-30) are still
> > RFC and not proposed for merging at this time.
> >
> > The patches apply on
> > git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git
> > for-next/core
> > d7b1d22d3821 ("arm64: uapi: Remove PSR_Q_BIT")
> >
> > To reduce spam, some people may not been copied on the entire series.
> > For those who did not receive the whole series, it can be found in the
> > linux-arm-kernel archive. [2]
> >
> > See the individual patches for details of changes.
> >
> > For reviewer convenience, a git tree is available. [4]
> >
> > Since there are some changes against already-reviewed patches, I've also
> > pushed an unsquashed fixes tree for people to take a look at if it
> > helps. [5]
> >
> >
> > Summary:
> >
> > * "regset: Add support for dynamically sized regsets" fixed to avoid
> > x86 breakage;
> >
> > * one trival arm64 patch added to add asmlinkage annotations, and a
> > corresponding minor change to the Core task context handling patch;
> >
> > * one new arm64 fix ("signal: Verify extra data is user-readable in
> > sys_rt_sigreturn") to ensure that access_ok() checks are done for the
> > whole extended signal frame, not just the base frame;
> >
> > * one minor fix to the SVE sigreturn code to return consistent
> > intermediate error values (semantic correctness, non-functional
> > change);
> >
> > * one minor change to call __copy_from_user() instead of
> > copy_from_user() in a situation where there is already an access_ok()
> > check;
> >
> >
> > [1] ARM Scalable Vector Extension
> > https://community.arm.com/groups/processors/blog/2016/08/22/technology-update-the-scalable-vector-extension-sve-for-the-armv8-a-architecture
> >
> > [2] linux-arm-kernel October 2017 Archives by thread
> > http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/thread.html
> >
> > [3] [PATCH v4 00/28] ARM Scalable Vector Extension (SVE)
> > http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/539414.html
> >
> > [4] For review and testing only -- **do not pull**
> > (This branch has review changelogs which should not form part of
> > the final commits.)
> >
> > v5 series (this posting)
> >
> > http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v5
> > git://linux-arm.org/linux-dm.git sve/v5
> >
> > [5] For review and testing only -- **do not pull**
> > (This branch has review changelogs which should not form part of
> > the final commits.)
> >
> > v4 with unsquashed fixes
> >
> > http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v4%2Bfixes
> > git://linux-arm.org/linux-dm.git sve/v4+fixes
>
> Hi Dave,
>
> During rebase of my ILP32 series on 4.15 kernel I found that
> ILP32 needs to be enabled with SVE support, like you do for
> LP64 in this series.
>
> I did all rebase work on this draft branch:
> https://github.com/norov/linux/tree/ilp32-4.15-rc7
>
> But any ILP32 program I tried crash, and the message in dmesg looks
> like this:
> [ 39.510667] CPU: 0 PID: 1857 Comm: mytime Not tainted 4.15.0-rc7-00028-g45e0659df4d9 #41
> [ 39.510712] Hardware name: linux,dummy-virt (DT)
> [ 39.510829] pstate: 00000000 (nzcv daif -PAN -UAO)
> [ 39.511101] pc : 0x33488e28
> [ 39.511125] lr : 0x33488e28
> [ 39.511138] sp : 00000000fffef670
> [ 39.511158] x29: 000000005a536c33 x28: 0000000000000000
> [ 39.511211] x27: 0000000000000000 x26: 0000000000000000
> [ 39.511235] x25: 0000000000000000 x24: 0000000000000000
> [ 39.511257] x23: 0000000000466000 x22: 0000000000000000
> [ 39.511278] x21: 0000000000000000 x20: 000000000047f2a8
> [ 39.511300] x19: 0000000000000000 x18: 0000000000000001
> [ 39.511321] x17: 0000000000001000 x16: 0000000000001030
> [ 39.511342] x15: 0000000000554e47 x14: 0000000000000001
> [ 39.511364] x13: 0000000000000004 x12: 000000000000003c
> [ 39.511385] x11: 0000100000000000 x10: 0800000000000000
> [ 39.511406] x9 : 0fffffffffffffff x8 : 000000000000007c
> [ 39.511427] x7 : 0000000000000077 x6 : 0000000000000041
> [ 39.511448] x5 : 0000000000000411 x4 : 00000000fbad2488
> [ 39.511468] x3 : 0000000000000001 x2 : 0000000000497950
> [ 39.511489] x1 : 0000000000497550 x0 : 0000000000000001
Hi Dave,
I fixed the crash. It was my local problem.
Thanks,
Yury
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2018-01-09 16:51 ` Yury Norov
0 siblings, 0 replies; 174+ messages in thread
From: Yury Norov @ 2018-01-09 16:51 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Jan 08, 2018 at 05:49:05PM +0300, Yury Norov wrote:
> On Tue, Oct 31, 2017 at 03:50:52PM +0000, Dave Martin wrote:
> > This series implements Linux kernel support for the ARM Scalable Vector
> > Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> > and full cover letter.
> >
> > This is a minor update to v4, but does contain a couple of important
> > fixes.
> >
> > As in previous postings, the last two patches (here 29-30) are still
> > RFC and not proposed for merging at this time.
> >
> > The patches apply on
> > git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git
> > for-next/core
> > d7b1d22d3821 ("arm64: uapi: Remove PSR_Q_BIT")
> >
> > To reduce spam, some people may not been copied on the entire series.
> > For those who did not receive the whole series, it can be found in the
> > linux-arm-kernel archive. [2]
> >
> > See the individual patches for details of changes.
> >
> > For reviewer convenience, a git tree is available. [4]
> >
> > Since there are some changes against already-reviewed patches, I've also
> > pushed an unsquashed fixes tree for people to take a look at if it
> > helps. [5]
> >
> >
> > Summary:
> >
> > * "regset: Add support for dynamically sized regsets" fixed to avoid
> > x86 breakage;
> >
> > * one trival arm64 patch added to add asmlinkage annotations, and a
> > corresponding minor change to the Core task context handling patch;
> >
> > * one new arm64 fix ("signal: Verify extra data is user-readable in
> > sys_rt_sigreturn") to ensure that access_ok() checks are done for the
> > whole extended signal frame, not just the base frame;
> >
> > * one minor fix to the SVE sigreturn code to return consistent
> > intermediate error values (semantic correctness, non-functional
> > change);
> >
> > * one minor change to call __copy_from_user() instead of
> > copy_from_user() in a situation where there is already an access_ok()
> > check;
> >
> >
> > [1] ARM Scalable Vector Extension
> > https://community.arm.com/groups/processors/blog/2016/08/22/technology-update-the-scalable-vector-extension-sve-for-the-armv8-a-architecture
> >
> > [2] linux-arm-kernel October 2017 Archives by thread
> > http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/thread.html
> >
> > [3] [PATCH v4 00/28] ARM Scalable Vector Extension (SVE)
> > http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/539414.html
> >
> > [4] For review and testing only -- **do not pull**
> > (This branch has review changelogs which should not form part of
> > the final commits.)
> >
> > v5 series (this posting)
> >
> > http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v5
> > git://linux-arm.org/linux-dm.git sve/v5
> >
> > [5] For review and testing only -- **do not pull**
> > (This branch has review changelogs which should not form part of
> > the final commits.)
> >
> > v4 with unsquashed fixes
> >
> > http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v4%2Bfixes
> > git://linux-arm.org/linux-dm.git sve/v4+fixes
>
> Hi Dave,
>
> During rebase of my ILP32 series on 4.15 kernel I found that
> ILP32 needs to be enabled with SVE support, like you do for
> LP64 in this series.
>
> I did all rebase work on this draft branch:
> https://github.com/norov/linux/tree/ilp32-4.15-rc7
>
> But any ILP32 program I tried crash, and the message in dmesg looks
> like this:
> [ 39.510667] CPU: 0 PID: 1857 Comm: mytime Not tainted 4.15.0-rc7-00028-g45e0659df4d9 #41
> [ 39.510712] Hardware name: linux,dummy-virt (DT)
> [ 39.510829] pstate: 00000000 (nzcv daif -PAN -UAO)
> [ 39.511101] pc : 0x33488e28
> [ 39.511125] lr : 0x33488e28
> [ 39.511138] sp : 00000000fffef670
> [ 39.511158] x29: 000000005a536c33 x28: 0000000000000000
> [ 39.511211] x27: 0000000000000000 x26: 0000000000000000
> [ 39.511235] x25: 0000000000000000 x24: 0000000000000000
> [ 39.511257] x23: 0000000000466000 x22: 0000000000000000
> [ 39.511278] x21: 0000000000000000 x20: 000000000047f2a8
> [ 39.511300] x19: 0000000000000000 x18: 0000000000000001
> [ 39.511321] x17: 0000000000001000 x16: 0000000000001030
> [ 39.511342] x15: 0000000000554e47 x14: 0000000000000001
> [ 39.511364] x13: 0000000000000004 x12: 000000000000003c
> [ 39.511385] x11: 0000100000000000 x10: 0800000000000000
> [ 39.511406] x9 : 0fffffffffffffff x8 : 000000000000007c
> [ 39.511427] x7 : 0000000000000077 x6 : 0000000000000041
> [ 39.511448] x5 : 0000000000000411 x4 : 00000000fbad2488
> [ 39.511468] x3 : 0000000000000001 x2 : 0000000000497950
> [ 39.511489] x1 : 0000000000497550 x0 : 0000000000000001
Hi Dave,
I fixed the crash. It was my local problem.
Thanks,
Yury
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2018-01-15 16:55 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2018-01-15 16:55 UTC (permalink / raw)
To: Yury Norov
Cc: linux-arm-kernel, linux-arch, Mark Rutland, Okamoto Takayuki,
libc-alpha, Ard Biesheuvel, Szabolcs Nagy, Catalin Marinas,
H . J . Lu, H. Peter Anvin, Will Deacon, Oleg Nesterov,
Dmitry Safonov, Ingo Molnar, Alexander Viro, Alan Hayward,
Thomas Gleixner, linux-api, Alex Bennée, kvmarm
On Mon, Jan 08, 2018 at 05:49:05PM +0300, Yury Norov wrote:
> On Tue, Oct 31, 2017 at 03:50:52PM +0000, Dave Martin wrote:
> > This series implements Linux kernel support for the ARM Scalable Vector
> > Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> > and full cover letter.
> >
> > This is a minor update to v4, but does contain a couple of important
> > fixes.
> >
> > As in previous postings, the last two patches (here 29-30) are still
> > RFC and not proposed for merging at this time.
> >
> > The patches apply on
> > git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git
> > for-next/core
> > d7b1d22d3821 ("arm64: uapi: Remove PSR_Q_BIT")
> >
> > To reduce spam, some people may not been copied on the entire series.
> > For those who did not receive the whole series, it can be found in the
> > linux-arm-kernel archive. [2]
> >
> > See the individual patches for details of changes.
> >
> > For reviewer convenience, a git tree is available. [4]
> >
> > Since there are some changes against already-reviewed patches, I've also
> > pushed an unsquashed fixes tree for people to take a look at if it
> > helps. [5]
> >
> >
> > Summary:
> >
> > * "regset: Add support for dynamically sized regsets" fixed to avoid
> > x86 breakage;
> >
> > * one trival arm64 patch added to add asmlinkage annotations, and a
> > corresponding minor change to the Core task context handling patch;
> >
> > * one new arm64 fix ("signal: Verify extra data is user-readable in
> > sys_rt_sigreturn") to ensure that access_ok() checks are done for the
> > whole extended signal frame, not just the base frame;
> >
> > * one minor fix to the SVE sigreturn code to return consistent
> > intermediate error values (semantic correctness, non-functional
> > change);
> >
> > * one minor change to call __copy_from_user() instead of
> > copy_from_user() in a situation where there is already an access_ok()
> > check;
> >
> >
> > [1] ARM Scalable Vector Extension
> > https://community.arm.com/groups/processors/blog/2016/08/22/technology-update-the-scalable-vector-extension-sve-for-the-armv8-a-architecture
> >
> > [2] linux-arm-kernel October 2017 Archives by thread
> > http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/thread.html
> >
> > [3] [PATCH v4 00/28] ARM Scalable Vector Extension (SVE)
> > http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/539414.html
> >
> > [4] For review and testing only -- **do not pull**
> > (This branch has review changelogs which should not form part of
> > the final commits.)
> >
> > v5 series (this posting)
> >
> > http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v5
> > git://linux-arm.org/linux-dm.git sve/v5
> >
> > [5] For review and testing only -- **do not pull**
> > (This branch has review changelogs which should not form part of
> > the final commits.)
> >
> > v4 with unsquashed fixes
> >
> > http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v4%2Bfixes
> > git://linux-arm.org/linux-dm.git sve/v4+fixes
>
> Hi Dave,
>
> During rebase of my ILP32 series on 4.15 kernel I found that
> ILP32 needs to be enabled with SVE support, like you do for
> LP64 in this series.
>
> I did all rebase work on this draft branch:
> https://github.com/norov/linux/tree/ilp32-4.15-rc7
>
> But any ILP32 program I tried crash, and the message in dmesg looks
> like this:
> [ 39.510667] CPU: 0 PID: 1857 Comm: mytime Not tainted 4.15.0-rc7-00028-g45e0659df4d9 #41
> [ 39.510712] Hardware name: linux,dummy-virt (DT)
> [ 39.510829] pstate: 00000000 (nzcv daif -PAN -UAO)
> [ 39.511101] pc : 0x33488e28
> [ 39.511125] lr : 0x33488e28
> [ 39.511138] sp : 00000000fffef670
> [ 39.511158] x29: 000000005a536c33 x28: 0000000000000000
> [ 39.511211] x27: 0000000000000000 x26: 0000000000000000
> [ 39.511235] x25: 0000000000000000 x24: 0000000000000000
> [ 39.511257] x23: 0000000000466000 x22: 0000000000000000
> [ 39.511278] x21: 0000000000000000 x20: 000000000047f2a8
> [ 39.511300] x19: 0000000000000000 x18: 0000000000000001
> [ 39.511321] x17: 0000000000001000 x16: 0000000000001030
> [ 39.511342] x15: 0000000000554e47 x14: 0000000000000001
> [ 39.511364] x13: 0000000000000004 x12: 000000000000003c
> [ 39.511385] x11: 0000100000000000 x10: 0800000000000000
> [ 39.511406] x9 : 0fffffffffffffff x8 : 000000000000007c
> [ 39.511427] x7 : 0000000000000077 x6 : 0000000000000041
> [ 39.511448] x5 : 0000000000000411 x4 : 00000000fbad2488
> [ 39.511468] x3 : 0000000000000001 x2 : 0000000000497950
> [ 39.511489] x1 : 0000000000497550 x0 : 0000000000000001
>
> (PC, LR and other registers may differ depending on test)
>
> I'm pretty sure that this is SVE-related issue because if I disable
> ARM64_SVE in config, everything becomes working.
Really, software that does not use SVE should not see any difference.
Do you see any pattern to the failures? Do they appear to be signal-
related?
Are you running on the SVE-enabled model, or is this on hardware?
> I didn't get deep enough into this yet, and most probably there's
> some stupid reason for crashing apps on my side, but in mail list
> I found some sve-related patches that I cannot apply both on 4.15-rc
> and next-20180108. And according to patch names, it is important
> fixes, like this one:
> https://www.spinics.net/lists/arm-kernel/msg619548.html
>
> ILP32 code may spit some kernel issues from time to time, so there's
> minor chance that the problem is not in ILP32 itself - that's why I
> write this email to you.
>
> What I want to ask you, do you have some branch with the most recent
> SVE code that includes all fixes? Better if it would be 4.15-based
> series, because we don't support ILP32 on next-* kernels now.
The above fix was queued for -rc2. All pending fixes should be in
mainline by now.
> Also, if you have few minutes to take look at my series, I would
> kindly ask you do this, because I still think that this is my
> misunderstanding of how SVE should work for ILP32, and you as author
> may just catch the bug at a glance.
I'll take a look -- I didn't think that carefully about the ILP32
case so far, because it "should" be straightforward. But there may
be gotchas I hadn't considered so far.
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2018-01-15 16:55 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2018-01-15 16:55 UTC (permalink / raw)
To: Yury Norov
Cc: linux-arm-kernel, linux-arch, Mark Rutland, Okamoto Takayuki,
libc-alpha, Ard Biesheuvel, Szabolcs Nagy, Catalin Marinas,
H . J . Lu, H. Peter Anvin, Will Deacon, Oleg Nesterov,
Dmitry Safonov, Ingo Molnar, Alexander Viro, Alan Hayward,
Thomas Gleixner, linux-api, Alex Bennée, kvmarm,
Christoffer Dall, Michael Kerrisk
On Mon, Jan 08, 2018 at 05:49:05PM +0300, Yury Norov wrote:
> On Tue, Oct 31, 2017 at 03:50:52PM +0000, Dave Martin wrote:
> > This series implements Linux kernel support for the ARM Scalable Vector
> > Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> > and full cover letter.
> >
> > This is a minor update to v4, but does contain a couple of important
> > fixes.
> >
> > As in previous postings, the last two patches (here 29-30) are still
> > RFC and not proposed for merging at this time.
> >
> > The patches apply on
> > git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git
> > for-next/core
> > d7b1d22d3821 ("arm64: uapi: Remove PSR_Q_BIT")
> >
> > To reduce spam, some people may not been copied on the entire series.
> > For those who did not receive the whole series, it can be found in the
> > linux-arm-kernel archive. [2]
> >
> > See the individual patches for details of changes.
> >
> > For reviewer convenience, a git tree is available. [4]
> >
> > Since there are some changes against already-reviewed patches, I've also
> > pushed an unsquashed fixes tree for people to take a look at if it
> > helps. [5]
> >
> >
> > Summary:
> >
> > * "regset: Add support for dynamically sized regsets" fixed to avoid
> > x86 breakage;
> >
> > * one trival arm64 patch added to add asmlinkage annotations, and a
> > corresponding minor change to the Core task context handling patch;
> >
> > * one new arm64 fix ("signal: Verify extra data is user-readable in
> > sys_rt_sigreturn") to ensure that access_ok() checks are done for the
> > whole extended signal frame, not just the base frame;
> >
> > * one minor fix to the SVE sigreturn code to return consistent
> > intermediate error values (semantic correctness, non-functional
> > change);
> >
> > * one minor change to call __copy_from_user() instead of
> > copy_from_user() in a situation where there is already an access_ok()
> > check;
> >
> >
> > [1] ARM Scalable Vector Extension
> > https://community.arm.com/groups/processors/blog/2016/08/22/technology-update-the-scalable-vector-extension-sve-for-the-armv8-a-architecture
> >
> > [2] linux-arm-kernel October 2017 Archives by thread
> > http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/thread.html
> >
> > [3] [PATCH v4 00/28] ARM Scalable Vector Extension (SVE)
> > http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/539414.html
> >
> > [4] For review and testing only -- **do not pull**
> > (This branch has review changelogs which should not form part of
> > the final commits.)
> >
> > v5 series (this posting)
> >
> > http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v5
> > git://linux-arm.org/linux-dm.git sve/v5
> >
> > [5] For review and testing only -- **do not pull**
> > (This branch has review changelogs which should not form part of
> > the final commits.)
> >
> > v4 with unsquashed fixes
> >
> > http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v4%2Bfixes
> > git://linux-arm.org/linux-dm.git sve/v4+fixes
>
> Hi Dave,
>
> During rebase of my ILP32 series on 4.15 kernel I found that
> ILP32 needs to be enabled with SVE support, like you do for
> LP64 in this series.
>
> I did all rebase work on this draft branch:
> https://github.com/norov/linux/tree/ilp32-4.15-rc7
>
> But any ILP32 program I tried crash, and the message in dmesg looks
> like this:
> [ 39.510667] CPU: 0 PID: 1857 Comm: mytime Not tainted 4.15.0-rc7-00028-g45e0659df4d9 #41
> [ 39.510712] Hardware name: linux,dummy-virt (DT)
> [ 39.510829] pstate: 00000000 (nzcv daif -PAN -UAO)
> [ 39.511101] pc : 0x33488e28
> [ 39.511125] lr : 0x33488e28
> [ 39.511138] sp : 00000000fffef670
> [ 39.511158] x29: 000000005a536c33 x28: 0000000000000000
> [ 39.511211] x27: 0000000000000000 x26: 0000000000000000
> [ 39.511235] x25: 0000000000000000 x24: 0000000000000000
> [ 39.511257] x23: 0000000000466000 x22: 0000000000000000
> [ 39.511278] x21: 0000000000000000 x20: 000000000047f2a8
> [ 39.511300] x19: 0000000000000000 x18: 0000000000000001
> [ 39.511321] x17: 0000000000001000 x16: 0000000000001030
> [ 39.511342] x15: 0000000000554e47 x14: 0000000000000001
> [ 39.511364] x13: 0000000000000004 x12: 000000000000003c
> [ 39.511385] x11: 0000100000000000 x10: 0800000000000000
> [ 39.511406] x9 : 0fffffffffffffff x8 : 000000000000007c
> [ 39.511427] x7 : 0000000000000077 x6 : 0000000000000041
> [ 39.511448] x5 : 0000000000000411 x4 : 00000000fbad2488
> [ 39.511468] x3 : 0000000000000001 x2 : 0000000000497950
> [ 39.511489] x1 : 0000000000497550 x0 : 0000000000000001
>
> (PC, LR and other registers may differ depending on test)
>
> I'm pretty sure that this is SVE-related issue because if I disable
> ARM64_SVE in config, everything becomes working.
Really, software that does not use SVE should not see any difference.
Do you see any pattern to the failures? Do they appear to be signal-
related?
Are you running on the SVE-enabled model, or is this on hardware?
> I didn't get deep enough into this yet, and most probably there's
> some stupid reason for crashing apps on my side, but in mail list
> I found some sve-related patches that I cannot apply both on 4.15-rc
> and next-20180108. And according to patch names, it is important
> fixes, like this one:
> https://www.spinics.net/lists/arm-kernel/msg619548.html
>
> ILP32 code may spit some kernel issues from time to time, so there's
> minor chance that the problem is not in ILP32 itself - that's why I
> write this email to you.
>
> What I want to ask you, do you have some branch with the most recent
> SVE code that includes all fixes? Better if it would be 4.15-based
> series, because we don't support ILP32 on next-* kernels now.
The above fix was queued for -rc2. All pending fixes should be in
mainline by now.
> Also, if you have few minutes to take look at my series, I would
> kindly ask you do this, because I still think that this is my
> misunderstanding of how SVE should work for ILP32, and you as author
> may just catch the bug at a glance.
I'll take a look -- I didn't think that carefully about the ILP32
case so far, because it "should" be straightforward. But there may
be gotchas I hadn't considered so far.
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2018-01-15 16:55 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2018-01-15 16:55 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Jan 08, 2018 at 05:49:05PM +0300, Yury Norov wrote:
> On Tue, Oct 31, 2017 at 03:50:52PM +0000, Dave Martin wrote:
> > This series implements Linux kernel support for the ARM Scalable Vector
> > Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> > and full cover letter.
> >
> > This is a minor update to v4, but does contain a couple of important
> > fixes.
> >
> > As in previous postings, the last two patches (here 29-30) are still
> > RFC and not proposed for merging at this time.
> >
> > The patches apply on
> > git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git
> > for-next/core
> > d7b1d22d3821 ("arm64: uapi: Remove PSR_Q_BIT")
> >
> > To reduce spam, some people may not been copied on the entire series.
> > For those who did not receive the whole series, it can be found in the
> > linux-arm-kernel archive. [2]
> >
> > See the individual patches for details of changes.
> >
> > For reviewer convenience, a git tree is available. [4]
> >
> > Since there are some changes against already-reviewed patches, I've also
> > pushed an unsquashed fixes tree for people to take a look at if it
> > helps. [5]
> >
> >
> > Summary:
> >
> > * "regset: Add support for dynamically sized regsets" fixed to avoid
> > x86 breakage;
> >
> > * one trival arm64 patch added to add asmlinkage annotations, and a
> > corresponding minor change to the Core task context handling patch;
> >
> > * one new arm64 fix ("signal: Verify extra data is user-readable in
> > sys_rt_sigreturn") to ensure that access_ok() checks are done for the
> > whole extended signal frame, not just the base frame;
> >
> > * one minor fix to the SVE sigreturn code to return consistent
> > intermediate error values (semantic correctness, non-functional
> > change);
> >
> > * one minor change to call __copy_from_user() instead of
> > copy_from_user() in a situation where there is already an access_ok()
> > check;
> >
> >
> > [1] ARM Scalable Vector Extension
> > https://community.arm.com/groups/processors/blog/2016/08/22/technology-update-the-scalable-vector-extension-sve-for-the-armv8-a-architecture
> >
> > [2] linux-arm-kernel October 2017 Archives by thread
> > http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/thread.html
> >
> > [3] [PATCH v4 00/28] ARM Scalable Vector Extension (SVE)
> > http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/539414.html
> >
> > [4] For review and testing only -- **do not pull**
> > (This branch has review changelogs which should not form part of
> > the final commits.)
> >
> > v5 series (this posting)
> >
> > http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v5
> > git://linux-arm.org/linux-dm.git sve/v5
> >
> > [5] For review and testing only -- **do not pull**
> > (This branch has review changelogs which should not form part of
> > the final commits.)
> >
> > v4 with unsquashed fixes
> >
> > http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v4%2Bfixes
> > git://linux-arm.org/linux-dm.git sve/v4+fixes
>
> Hi Dave,
>
> During rebase of my ILP32 series on 4.15 kernel I found that
> ILP32 needs to be enabled with SVE support, like you do for
> LP64 in this series.
>
> I did all rebase work on this draft branch:
> https://github.com/norov/linux/tree/ilp32-4.15-rc7
>
> But any ILP32 program I tried crash, and the message in dmesg looks
> like this:
> [ 39.510667] CPU: 0 PID: 1857 Comm: mytime Not tainted 4.15.0-rc7-00028-g45e0659df4d9 #41
> [ 39.510712] Hardware name: linux,dummy-virt (DT)
> [ 39.510829] pstate: 00000000 (nzcv daif -PAN -UAO)
> [ 39.511101] pc : 0x33488e28
> [ 39.511125] lr : 0x33488e28
> [ 39.511138] sp : 00000000fffef670
> [ 39.511158] x29: 000000005a536c33 x28: 0000000000000000
> [ 39.511211] x27: 0000000000000000 x26: 0000000000000000
> [ 39.511235] x25: 0000000000000000 x24: 0000000000000000
> [ 39.511257] x23: 0000000000466000 x22: 0000000000000000
> [ 39.511278] x21: 0000000000000000 x20: 000000000047f2a8
> [ 39.511300] x19: 0000000000000000 x18: 0000000000000001
> [ 39.511321] x17: 0000000000001000 x16: 0000000000001030
> [ 39.511342] x15: 0000000000554e47 x14: 0000000000000001
> [ 39.511364] x13: 0000000000000004 x12: 000000000000003c
> [ 39.511385] x11: 0000100000000000 x10: 0800000000000000
> [ 39.511406] x9 : 0fffffffffffffff x8 : 000000000000007c
> [ 39.511427] x7 : 0000000000000077 x6 : 0000000000000041
> [ 39.511448] x5 : 0000000000000411 x4 : 00000000fbad2488
> [ 39.511468] x3 : 0000000000000001 x2 : 0000000000497950
> [ 39.511489] x1 : 0000000000497550 x0 : 0000000000000001
>
> (PC, LR and other registers may differ depending on test)
>
> I'm pretty sure that this is SVE-related issue because if I disable
> ARM64_SVE in config, everything becomes working.
Really, software that does not use SVE should not see any difference.
Do you see any pattern to the failures? Do they appear to be signal-
related?
Are you running on the SVE-enabled model, or is this on hardware?
> I didn't get deep enough into this yet, and most probably there's
> some stupid reason for crashing apps on my side, but in mail list
> I found some sve-related patches that I cannot apply both on 4.15-rc
> and next-20180108. And according to patch names, it is important
> fixes, like this one:
> https://www.spinics.net/lists/arm-kernel/msg619548.html
>
> ILP32 code may spit some kernel issues from time to time, so there's
> minor chance that the problem is not in ILP32 itself - that's why I
> write this email to you.
>
> What I want to ask you, do you have some branch with the most recent
> SVE code that includes all fixes? Better if it would be 4.15-based
> series, because we don't support ILP32 on next-* kernels now.
The above fix was queued for -rc2. All pending fixes should be in
mainline by now.
> Also, if you have few minutes to take look at my series, I would
> kindly ask you do this, because I still think that this is my
> misunderstanding of how SVE should work for ILP32, and you as author
> may just catch the bug at a glance.
I'll take a look -- I didn't think that carefully about the ILP32
case so far, because it "should" be straightforward. But there may
be gotchas I hadn't considered so far.
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2018-01-15 17:22 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2018-01-15 17:22 UTC (permalink / raw)
To: Yury Norov
Cc: linux-arm-kernel, linux-arch, Mark Rutland, Okamoto Takayuki,
libc-alpha, Ard Biesheuvel, Szabolcs Nagy, Catalin Marinas,
H . J . Lu, H. Peter Anvin, Will Deacon, Oleg Nesterov,
Dmitry Safonov, Ingo Molnar, Alexander Viro, Alan Hayward,
Thomas Gleixner, linux-api, Alex Bennée, kvmarm
On Tue, Jan 09, 2018 at 07:51:20PM +0300, Yury Norov wrote:
> On Mon, Jan 08, 2018 at 05:49:05PM +0300, Yury Norov wrote:
> > On Tue, Oct 31, 2017 at 03:50:52PM +0000, Dave Martin wrote:
> > > This series implements Linux kernel support for the ARM Scalable Vector
> > > Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> > > and full cover letter.
> > >
> > > This is a minor update to v4, but does contain a couple of important
> > > fixes.
> > >
> > > As in previous postings, the last two patches (here 29-30) are still
> > > RFC and not proposed for merging at this time.
> > >
> > > The patches apply on
> > > git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git
> > > for-next/core
> > > d7b1d22d3821 ("arm64: uapi: Remove PSR_Q_BIT")
> > >
> > > To reduce spam, some people may not been copied on the entire series.
> > > For those who did not receive the whole series, it can be found in the
> > > linux-arm-kernel archive. [2]
> > >
> > > See the individual patches for details of changes.
> > >
> > > For reviewer convenience, a git tree is available. [4]
> > >
> > > Since there are some changes against already-reviewed patches, I've also
> > > pushed an unsquashed fixes tree for people to take a look at if it
> > > helps. [5]
> > >
> > >
> > > Summary:
> > >
> > > * "regset: Add support for dynamically sized regsets" fixed to avoid
> > > x86 breakage;
> > >
> > > * one trival arm64 patch added to add asmlinkage annotations, and a
> > > corresponding minor change to the Core task context handling patch;
> > >
> > > * one new arm64 fix ("signal: Verify extra data is user-readable in
> > > sys_rt_sigreturn") to ensure that access_ok() checks are done for the
> > > whole extended signal frame, not just the base frame;
> > >
> > > * one minor fix to the SVE sigreturn code to return consistent
> > > intermediate error values (semantic correctness, non-functional
> > > change);
> > >
> > > * one minor change to call __copy_from_user() instead of
> > > copy_from_user() in a situation where there is already an access_ok()
> > > check;
> > >
> > >
> > > [1] ARM Scalable Vector Extension
> > > https://community.arm.com/groups/processors/blog/2016/08/22/technology-update-the-scalable-vector-extension-sve-for-the-armv8-a-architecture
> > >
> > > [2] linux-arm-kernel October 2017 Archives by thread
> > > http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/thread.html
> > >
> > > [3] [PATCH v4 00/28] ARM Scalable Vector Extension (SVE)
> > > http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/539414.html
> > >
> > > [4] For review and testing only -- **do not pull**
> > > (This branch has review changelogs which should not form part of
> > > the final commits.)
> > >
> > > v5 series (this posting)
> > >
> > > http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v5
> > > git://linux-arm.org/linux-dm.git sve/v5
> > >
> > > [5] For review and testing only -- **do not pull**
> > > (This branch has review changelogs which should not form part of
> > > the final commits.)
> > >
> > > v4 with unsquashed fixes
> > >
> > > http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v4%2Bfixes
> > > git://linux-arm.org/linux-dm.git sve/v4+fixes
> >
> > Hi Dave,
> >
> > During rebase of my ILP32 series on 4.15 kernel I found that
> > ILP32 needs to be enabled with SVE support, like you do for
> > LP64 in this series.
> >
> > I did all rebase work on this draft branch:
> > https://github.com/norov/linux/tree/ilp32-4.15-rc7
> >
> > But any ILP32 program I tried crash, and the message in dmesg looks
> > like this:
> > [ 39.510667] CPU: 0 PID: 1857 Comm: mytime Not tainted 4.15.0-rc7-00028-g45e0659df4d9 #41
> > [ 39.510712] Hardware name: linux,dummy-virt (DT)
> > [ 39.510829] pstate: 00000000 (nzcv daif -PAN -UAO)
> > [ 39.511101] pc : 0x33488e28
> > [ 39.511125] lr : 0x33488e28
> > [ 39.511138] sp : 00000000fffef670
> > [ 39.511158] x29: 000000005a536c33 x28: 0000000000000000
> > [ 39.511211] x27: 0000000000000000 x26: 0000000000000000
> > [ 39.511235] x25: 0000000000000000 x24: 0000000000000000
> > [ 39.511257] x23: 0000000000466000 x22: 0000000000000000
> > [ 39.511278] x21: 0000000000000000 x20: 000000000047f2a8
> > [ 39.511300] x19: 0000000000000000 x18: 0000000000000001
> > [ 39.511321] x17: 0000000000001000 x16: 0000000000001030
> > [ 39.511342] x15: 0000000000554e47 x14: 0000000000000001
> > [ 39.511364] x13: 0000000000000004 x12: 000000000000003c
> > [ 39.511385] x11: 0000100000000000 x10: 0800000000000000
> > [ 39.511406] x9 : 0fffffffffffffff x8 : 000000000000007c
> > [ 39.511427] x7 : 0000000000000077 x6 : 0000000000000041
> > [ 39.511448] x5 : 0000000000000411 x4 : 00000000fbad2488
> > [ 39.511468] x3 : 0000000000000001 x2 : 0000000000497950
> > [ 39.511489] x1 : 0000000000497550 x0 : 0000000000000001
>
> Hi Dave,
>
> I fixed the crash. It was my local problem.
Ah, right :)
I'll take a look at your code anyway in case there's something
else one of us didn't think of.
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2018-01-15 17:22 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2018-01-15 17:22 UTC (permalink / raw)
To: Yury Norov
Cc: linux-arm-kernel, linux-arch, Mark Rutland, Okamoto Takayuki,
libc-alpha, Ard Biesheuvel, Szabolcs Nagy, Catalin Marinas,
H . J . Lu, H. Peter Anvin, Will Deacon, Oleg Nesterov,
Dmitry Safonov, Ingo Molnar, Alexander Viro, Alan Hayward,
Thomas Gleixner, linux-api, Alex Bennée, kvmarm,
Christoffer Dall, Michael Kerrisk
On Tue, Jan 09, 2018 at 07:51:20PM +0300, Yury Norov wrote:
> On Mon, Jan 08, 2018 at 05:49:05PM +0300, Yury Norov wrote:
> > On Tue, Oct 31, 2017 at 03:50:52PM +0000, Dave Martin wrote:
> > > This series implements Linux kernel support for the ARM Scalable Vector
> > > Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> > > and full cover letter.
> > >
> > > This is a minor update to v4, but does contain a couple of important
> > > fixes.
> > >
> > > As in previous postings, the last two patches (here 29-30) are still
> > > RFC and not proposed for merging at this time.
> > >
> > > The patches apply on
> > > git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git
> > > for-next/core
> > > d7b1d22d3821 ("arm64: uapi: Remove PSR_Q_BIT")
> > >
> > > To reduce spam, some people may not been copied on the entire series.
> > > For those who did not receive the whole series, it can be found in the
> > > linux-arm-kernel archive. [2]
> > >
> > > See the individual patches for details of changes.
> > >
> > > For reviewer convenience, a git tree is available. [4]
> > >
> > > Since there are some changes against already-reviewed patches, I've also
> > > pushed an unsquashed fixes tree for people to take a look at if it
> > > helps. [5]
> > >
> > >
> > > Summary:
> > >
> > > * "regset: Add support for dynamically sized regsets" fixed to avoid
> > > x86 breakage;
> > >
> > > * one trival arm64 patch added to add asmlinkage annotations, and a
> > > corresponding minor change to the Core task context handling patch;
> > >
> > > * one new arm64 fix ("signal: Verify extra data is user-readable in
> > > sys_rt_sigreturn") to ensure that access_ok() checks are done for the
> > > whole extended signal frame, not just the base frame;
> > >
> > > * one minor fix to the SVE sigreturn code to return consistent
> > > intermediate error values (semantic correctness, non-functional
> > > change);
> > >
> > > * one minor change to call __copy_from_user() instead of
> > > copy_from_user() in a situation where there is already an access_ok()
> > > check;
> > >
> > >
> > > [1] ARM Scalable Vector Extension
> > > https://community.arm.com/groups/processors/blog/2016/08/22/technology-update-the-scalable-vector-extension-sve-for-the-armv8-a-architecture
> > >
> > > [2] linux-arm-kernel October 2017 Archives by thread
> > > http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/thread.html
> > >
> > > [3] [PATCH v4 00/28] ARM Scalable Vector Extension (SVE)
> > > http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/539414.html
> > >
> > > [4] For review and testing only -- **do not pull**
> > > (This branch has review changelogs which should not form part of
> > > the final commits.)
> > >
> > > v5 series (this posting)
> > >
> > > http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v5
> > > git://linux-arm.org/linux-dm.git sve/v5
> > >
> > > [5] For review and testing only -- **do not pull**
> > > (This branch has review changelogs which should not form part of
> > > the final commits.)
> > >
> > > v4 with unsquashed fixes
> > >
> > > http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v4%2Bfixes
> > > git://linux-arm.org/linux-dm.git sve/v4+fixes
> >
> > Hi Dave,
> >
> > During rebase of my ILP32 series on 4.15 kernel I found that
> > ILP32 needs to be enabled with SVE support, like you do for
> > LP64 in this series.
> >
> > I did all rebase work on this draft branch:
> > https://github.com/norov/linux/tree/ilp32-4.15-rc7
> >
> > But any ILP32 program I tried crash, and the message in dmesg looks
> > like this:
> > [ 39.510667] CPU: 0 PID: 1857 Comm: mytime Not tainted 4.15.0-rc7-00028-g45e0659df4d9 #41
> > [ 39.510712] Hardware name: linux,dummy-virt (DT)
> > [ 39.510829] pstate: 00000000 (nzcv daif -PAN -UAO)
> > [ 39.511101] pc : 0x33488e28
> > [ 39.511125] lr : 0x33488e28
> > [ 39.511138] sp : 00000000fffef670
> > [ 39.511158] x29: 000000005a536c33 x28: 0000000000000000
> > [ 39.511211] x27: 0000000000000000 x26: 0000000000000000
> > [ 39.511235] x25: 0000000000000000 x24: 0000000000000000
> > [ 39.511257] x23: 0000000000466000 x22: 0000000000000000
> > [ 39.511278] x21: 0000000000000000 x20: 000000000047f2a8
> > [ 39.511300] x19: 0000000000000000 x18: 0000000000000001
> > [ 39.511321] x17: 0000000000001000 x16: 0000000000001030
> > [ 39.511342] x15: 0000000000554e47 x14: 0000000000000001
> > [ 39.511364] x13: 0000000000000004 x12: 000000000000003c
> > [ 39.511385] x11: 0000100000000000 x10: 0800000000000000
> > [ 39.511406] x9 : 0fffffffffffffff x8 : 000000000000007c
> > [ 39.511427] x7 : 0000000000000077 x6 : 0000000000000041
> > [ 39.511448] x5 : 0000000000000411 x4 : 00000000fbad2488
> > [ 39.511468] x3 : 0000000000000001 x2 : 0000000000497950
> > [ 39.511489] x1 : 0000000000497550 x0 : 0000000000000001
>
> Hi Dave,
>
> I fixed the crash. It was my local problem.
Ah, right :)
I'll take a look at your code anyway in case there's something
else one of us didn't think of.
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2018-01-15 17:22 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2018-01-15 17:22 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jan 09, 2018 at 07:51:20PM +0300, Yury Norov wrote:
> On Mon, Jan 08, 2018 at 05:49:05PM +0300, Yury Norov wrote:
> > On Tue, Oct 31, 2017 at 03:50:52PM +0000, Dave Martin wrote:
> > > This series implements Linux kernel support for the ARM Scalable Vector
> > > Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> > > and full cover letter.
> > >
> > > This is a minor update to v4, but does contain a couple of important
> > > fixes.
> > >
> > > As in previous postings, the last two patches (here 29-30) are still
> > > RFC and not proposed for merging at this time.
> > >
> > > The patches apply on
> > > git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git
> > > for-next/core
> > > d7b1d22d3821 ("arm64: uapi: Remove PSR_Q_BIT")
> > >
> > > To reduce spam, some people may not been copied on the entire series.
> > > For those who did not receive the whole series, it can be found in the
> > > linux-arm-kernel archive. [2]
> > >
> > > See the individual patches for details of changes.
> > >
> > > For reviewer convenience, a git tree is available. [4]
> > >
> > > Since there are some changes against already-reviewed patches, I've also
> > > pushed an unsquashed fixes tree for people to take a look at if it
> > > helps. [5]
> > >
> > >
> > > Summary:
> > >
> > > * "regset: Add support for dynamically sized regsets" fixed to avoid
> > > x86 breakage;
> > >
> > > * one trival arm64 patch added to add asmlinkage annotations, and a
> > > corresponding minor change to the Core task context handling patch;
> > >
> > > * one new arm64 fix ("signal: Verify extra data is user-readable in
> > > sys_rt_sigreturn") to ensure that access_ok() checks are done for the
> > > whole extended signal frame, not just the base frame;
> > >
> > > * one minor fix to the SVE sigreturn code to return consistent
> > > intermediate error values (semantic correctness, non-functional
> > > change);
> > >
> > > * one minor change to call __copy_from_user() instead of
> > > copy_from_user() in a situation where there is already an access_ok()
> > > check;
> > >
> > >
> > > [1] ARM Scalable Vector Extension
> > > https://community.arm.com/groups/processors/blog/2016/08/22/technology-update-the-scalable-vector-extension-sve-for-the-armv8-a-architecture
> > >
> > > [2] linux-arm-kernel October 2017 Archives by thread
> > > http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/thread.html
> > >
> > > [3] [PATCH v4 00/28] ARM Scalable Vector Extension (SVE)
> > > http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/539414.html
> > >
> > > [4] For review and testing only -- **do not pull**
> > > (This branch has review changelogs which should not form part of
> > > the final commits.)
> > >
> > > v5 series (this posting)
> > >
> > > http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v5
> > > git://linux-arm.org/linux-dm.git sve/v5
> > >
> > > [5] For review and testing only -- **do not pull**
> > > (This branch has review changelogs which should not form part of
> > > the final commits.)
> > >
> > > v4 with unsquashed fixes
> > >
> > > http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v4%2Bfixes
> > > git://linux-arm.org/linux-dm.git sve/v4+fixes
> >
> > Hi Dave,
> >
> > During rebase of my ILP32 series on 4.15 kernel I found that
> > ILP32 needs to be enabled with SVE support, like you do for
> > LP64 in this series.
> >
> > I did all rebase work on this draft branch:
> > https://github.com/norov/linux/tree/ilp32-4.15-rc7
> >
> > But any ILP32 program I tried crash, and the message in dmesg looks
> > like this:
> > [ 39.510667] CPU: 0 PID: 1857 Comm: mytime Not tainted 4.15.0-rc7-00028-g45e0659df4d9 #41
> > [ 39.510712] Hardware name: linux,dummy-virt (DT)
> > [ 39.510829] pstate: 00000000 (nzcv daif -PAN -UAO)
> > [ 39.511101] pc : 0x33488e28
> > [ 39.511125] lr : 0x33488e28
> > [ 39.511138] sp : 00000000fffef670
> > [ 39.511158] x29: 000000005a536c33 x28: 0000000000000000
> > [ 39.511211] x27: 0000000000000000 x26: 0000000000000000
> > [ 39.511235] x25: 0000000000000000 x24: 0000000000000000
> > [ 39.511257] x23: 0000000000466000 x22: 0000000000000000
> > [ 39.511278] x21: 0000000000000000 x20: 000000000047f2a8
> > [ 39.511300] x19: 0000000000000000 x18: 0000000000000001
> > [ 39.511321] x17: 0000000000001000 x16: 0000000000001030
> > [ 39.511342] x15: 0000000000554e47 x14: 0000000000000001
> > [ 39.511364] x13: 0000000000000004 x12: 000000000000003c
> > [ 39.511385] x11: 0000100000000000 x10: 0800000000000000
> > [ 39.511406] x9 : 0fffffffffffffff x8 : 000000000000007c
> > [ 39.511427] x7 : 0000000000000077 x6 : 0000000000000041
> > [ 39.511448] x5 : 0000000000000411 x4 : 00000000fbad2488
> > [ 39.511468] x3 : 0000000000000001 x2 : 0000000000497950
> > [ 39.511489] x1 : 0000000000497550 x0 : 0000000000000001
>
> Hi Dave,
>
> I fixed the crash. It was my local problem.
Ah, right :)
I'll take a look at your code anyway in case there's something
else one of us didn't think of.
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2018-01-16 10:11 ` Yury Norov
0 siblings, 0 replies; 174+ messages in thread
From: Yury Norov @ 2018-01-16 10:11 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-arch-u79uwXL29TY76Z2rM5mHXA, Mark Rutland,
Okamoto Takayuki, libc-alpha-9JcytcrH/bA+uJoB2kUjGw,
Ard Biesheuvel, Szabolcs Nagy, Catalin Marinas, H . J . Lu,
H. Peter Anvin, Will Deacon, Oleg Nesterov, Dmitry Safonov,
Ingo Molnar, Alexander Viro, Alan Hayward, Thomas Gleixner,
linux-api-u79uwXL29TY76Z2rM5mHXA, Alex Bennée,
kvmarm-FPEHb7Xf0XXUo1n7N8X6UoWGPAHP3yOg
On Mon, Jan 15, 2018 at 05:22:01PM +0000, Dave Martin wrote:
> On Tue, Jan 09, 2018 at 07:51:20PM +0300, Yury Norov wrote:
> > On Mon, Jan 08, 2018 at 05:49:05PM +0300, Yury Norov wrote:
> > > On Tue, Oct 31, 2017 at 03:50:52PM +0000, Dave Martin wrote:
> > > > This series implements Linux kernel support for the ARM Scalable Vector
> > > > Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> > > > and full cover letter.
> > > >
> > > > This is a minor update to v4, but does contain a couple of important
> > > > fixes.
> > > >
> > > > As in previous postings, the last two patches (here 29-30) are still
> > > > RFC and not proposed for merging at this time.
> > > >
> > > > The patches apply on
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git
> > > > for-next/core
> > > > d7b1d22d3821 ("arm64: uapi: Remove PSR_Q_BIT")
> > > >
> > > > To reduce spam, some people may not been copied on the entire series.
> > > > For those who did not receive the whole series, it can be found in the
> > > > linux-arm-kernel archive. [2]
> > > >
> > > > See the individual patches for details of changes.
> > > >
> > > > For reviewer convenience, a git tree is available. [4]
> > > >
> > > > Since there are some changes against already-reviewed patches, I've also
> > > > pushed an unsquashed fixes tree for people to take a look at if it
> > > > helps. [5]
> > > >
> > > >
> > > > Summary:
> > > >
> > > > * "regset: Add support for dynamically sized regsets" fixed to avoid
> > > > x86 breakage;
> > > >
> > > > * one trival arm64 patch added to add asmlinkage annotations, and a
> > > > corresponding minor change to the Core task context handling patch;
> > > >
> > > > * one new arm64 fix ("signal: Verify extra data is user-readable in
> > > > sys_rt_sigreturn") to ensure that access_ok() checks are done for the
> > > > whole extended signal frame, not just the base frame;
> > > >
> > > > * one minor fix to the SVE sigreturn code to return consistent
> > > > intermediate error values (semantic correctness, non-functional
> > > > change);
> > > >
> > > > * one minor change to call __copy_from_user() instead of
> > > > copy_from_user() in a situation where there is already an access_ok()
> > > > check;
> > > >
> > > >
> > > > [1] ARM Scalable Vector Extension
> > > > https://community.arm.com/groups/processors/blog/2016/08/22/technology-update-the-scalable-vector-extension-sve-for-the-armv8-a-architecture
> > > >
> > > > [2] linux-arm-kernel October 2017 Archives by thread
> > > > http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/thread.html
> > > >
> > > > [3] [PATCH v4 00/28] ARM Scalable Vector Extension (SVE)
> > > > http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/539414.html
> > > >
> > > > [4] For review and testing only -- **do not pull**
> > > > (This branch has review changelogs which should not form part of
> > > > the final commits.)
> > > >
> > > > v5 series (this posting)
> > > >
> > > > http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v5
> > > > git://linux-arm.org/linux-dm.git sve/v5
> > > >
> > > > [5] For review and testing only -- **do not pull**
> > > > (This branch has review changelogs which should not form part of
> > > > the final commits.)
> > > >
> > > > v4 with unsquashed fixes
> > > >
> > > > http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v4%2Bfixes
> > > > git://linux-arm.org/linux-dm.git sve/v4+fixes
> > >
> > > Hi Dave,
> > >
> > > During rebase of my ILP32 series on 4.15 kernel I found that
> > > ILP32 needs to be enabled with SVE support, like you do for
> > > LP64 in this series.
> > >
> > > I did all rebase work on this draft branch:
> > > https://github.com/norov/linux/tree/ilp32-4.15-rc7
> > >
> > > But any ILP32 program I tried crash, and the message in dmesg looks
> > > like this:
> > > [ 39.510667] CPU: 0 PID: 1857 Comm: mytime Not tainted 4.15.0-rc7-00028-g45e0659df4d9 #41
> > > [ 39.510712] Hardware name: linux,dummy-virt (DT)
> > > [ 39.510829] pstate: 00000000 (nzcv daif -PAN -UAO)
> > > [ 39.511101] pc : 0x33488e28
> > > [ 39.511125] lr : 0x33488e28
> > > [ 39.511138] sp : 00000000fffef670
> > > [ 39.511158] x29: 000000005a536c33 x28: 0000000000000000
> > > [ 39.511211] x27: 0000000000000000 x26: 0000000000000000
> > > [ 39.511235] x25: 0000000000000000 x24: 0000000000000000
> > > [ 39.511257] x23: 0000000000466000 x22: 0000000000000000
> > > [ 39.511278] x21: 0000000000000000 x20: 000000000047f2a8
> > > [ 39.511300] x19: 0000000000000000 x18: 0000000000000001
> > > [ 39.511321] x17: 0000000000001000 x16: 0000000000001030
> > > [ 39.511342] x15: 0000000000554e47 x14: 0000000000000001
> > > [ 39.511364] x13: 0000000000000004 x12: 000000000000003c
> > > [ 39.511385] x11: 0000100000000000 x10: 0800000000000000
> > > [ 39.511406] x9 : 0fffffffffffffff x8 : 000000000000007c
> > > [ 39.511427] x7 : 0000000000000077 x6 : 0000000000000041
> > > [ 39.511448] x5 : 0000000000000411 x4 : 00000000fbad2488
> > > [ 39.511468] x3 : 0000000000000001 x2 : 0000000000497950
> > > [ 39.511489] x1 : 0000000000497550 x0 : 0000000000000001
> >
> > Hi Dave,
> >
> > I fixed the crash. It was my local problem.
>
> Ah, right :)
>
> I'll take a look at your code anyway in case there's something
> else one of us didn't think of.
Thanks, Dave.
This is the branch:
https://github.com/norov/linux/tree/ilp32-4.15-rc7
SVE-related changes are mostly in patches:
arm64: ilp32: introduce ilp32-specific handlers for sigframe and ucontext
arm64: signal32: move ilp32 and aarch32 common code to separated file
arm64: signal: share lp64 signal structures and routines to ilp32
arm64: ilp32: add sys_ilp32.c and a separate table (in entry.S) to use it
Yury
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2018-01-16 10:11 ` Yury Norov
0 siblings, 0 replies; 174+ messages in thread
From: Yury Norov @ 2018-01-16 10:11 UTC (permalink / raw)
To: Dave Martin
Cc: linux-arm-kernel, linux-arch, Mark Rutland, Okamoto Takayuki,
libc-alpha, Ard Biesheuvel, Szabolcs Nagy, Catalin Marinas,
H . J . Lu, H. Peter Anvin, Will Deacon, Oleg Nesterov,
Dmitry Safonov, Ingo Molnar, Alexander Viro, Alan Hayward,
Thomas Gleixner, linux-api, Alex Bennée, kvmarm,
Christoffer Dall, Michael Kerrisk
On Mon, Jan 15, 2018 at 05:22:01PM +0000, Dave Martin wrote:
> On Tue, Jan 09, 2018 at 07:51:20PM +0300, Yury Norov wrote:
> > On Mon, Jan 08, 2018 at 05:49:05PM +0300, Yury Norov wrote:
> > > On Tue, Oct 31, 2017 at 03:50:52PM +0000, Dave Martin wrote:
> > > > This series implements Linux kernel support for the ARM Scalable Vector
> > > > Extension (SVE). [1] It supersedes the previous v3: see [3] for link
> > > > and full cover letter.
> > > >
> > > > This is a minor update to v4, but does contain a couple of important
> > > > fixes.
> > > >
> > > > As in previous postings, the last two patches (here 29-30) are still
> > > > RFC and not proposed for merging at this time.
> > > >
> > > > The patches apply on
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git
> > > > for-next/core
> > > > d7b1d22d3821 ("arm64: uapi: Remove PSR_Q_BIT")
> > > >
> > > > To reduce spam, some people may not been copied on the entire series.
> > > > For those who did not receive the whole series, it can be found in the
> > > > linux-arm-kernel archive. [2]
> > > >
> > > > See the individual patches for details of changes.
> > > >
> > > > For reviewer convenience, a git tree is available. [4]
> > > >
> > > > Since there are some changes against already-reviewed patches, I've also
> > > > pushed an unsquashed fixes tree for people to take a look at if it
> > > > helps. [5]
> > > >
> > > >
> > > > Summary:
> > > >
> > > > * "regset: Add support for dynamically sized regsets" fixed to avoid
> > > > x86 breakage;
> > > >
> > > > * one trival arm64 patch added to add asmlinkage annotations, and a
> > > > corresponding minor change to the Core task context handling patch;
> > > >
> > > > * one new arm64 fix ("signal: Verify extra data is user-readable in
> > > > sys_rt_sigreturn") to ensure that access_ok() checks are done for the
> > > > whole extended signal frame, not just the base frame;
> > > >
> > > > * one minor fix to the SVE sigreturn code to return consistent
> > > > intermediate error values (semantic correctness, non-functional
> > > > change);
> > > >
> > > > * one minor change to call __copy_from_user() instead of
> > > > copy_from_user() in a situation where there is already an access_ok()
> > > > check;
> > > >
> > > >
> > > > [1] ARM Scalable Vector Extension
> > > > https://community.arm.com/groups/processors/blog/2016/08/22/technology-update-the-scalable-vector-extension-sve-for-the-armv8-a-architecture
> > > >
> > > > [2] linux-arm-kernel October 2017 Archives by thread
> > > > http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/thread.html
> > > >
> > > > [3] [PATCH v4 00/28] ARM Scalable Vector Extension (SVE)
> > > > http://lists.infradead.org/pipermail/linux-arm-kernel/2017-October/539414.html
> > > >
> > > > [4] For review and testing only -- **do not pull**
> > > > (This branch has review changelogs which should not form part of
> > > > the final commits.)
> > > >
> > > > v5 series (this posting)
> > > >
> > > > http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v5
> > > > git://linux-arm.org/linux-dm.git sve/v5
> > > >
> > > > [5] For review and testing only -- **do not pull**
> > > > (This branch has review changelogs which should not form part of
> > > > the final commits.)
> > > >
> > > > v4 with unsquashed fixes
> > > >
> > > > http://linux-arm.org/git?p=linux-dm.git;a=shortlog;h=refs/heads/sve/v4%2Bfixes
> > > > git://linux-arm.org/linux-dm.git sve/v4+fixes
> > >
> > > Hi Dave,
> > >
> > > During rebase of my ILP32 series on 4.15 kernel I found that
> > > ILP32 needs to be enabled with SVE support, like you do for
> > > LP64 in this series.
> > >
> > > I did all rebase work on this draft branch:
> > > https://github.com/norov/linux/tree/ilp32-4.15-rc7
> > >
> > > But any ILP32 program I tried crash, and the message in dmesg looks
> > > like this:
> > > [ 39.510667] CPU: 0 PID: 1857 Comm: mytime Not tainted 4.15.0-rc7-00028-g45e0659df4d9 #41
> > > [ 39.510712] Hardware name: linux,dummy-virt (DT)
> > > [ 39.510829] pstate: 00000000 (nzcv daif -PAN -UAO)
> > > [ 39.511101] pc : 0x33488e28
> > > [ 39.511125] lr : 0x33488e28
> > > [ 39.511138] sp : 00000000fffef670
> > > [ 39.511158] x29: 000000005a536c33 x28: 0000000000000000
> > > [ 39.511211] x27: 0000000000000000 x26: 0000000000000000
> > > [ 39.511235] x25: 0000000000000000 x24: 0000000000000000
> > > [ 39.511257] x23: 0000000000466000 x22: 0000000000000000
> > > [ 39.511278] x21: 0000000000000000 x20: 000000000047f2a8
> > > [ 39.511300] x19: 0000000000000000 x18: 0000000000000001
> > > [ 39.511321] x17: 0000000000001000 x16: 0000000000001030
> > > [ 39.511342] x15: 0000000000554e47 x14: 0000000000000001
> > > [ 39.511364] x13: 0000000000000004 x12: 000000000000003c
> > > [ 39.511385] x11: 0000100000000000 x10: 0800000000000000
> > > [ 39.511406] x9 : 0fffffffffffffff x8 : 000000000000007c
> > > [ 39.511427] x7 : 0000000000000077 x6 : 0000000000000041
> > > [ 39.511448] x5 : 0000000000000411 x4 : 00000000fbad2488
> > > [ 39.511468] x3 : 0000000000000001 x2 : 0000000000497950
> > > [ 39.511489] x1 : 0000000000497550 x0 : 0000000000000001
> >
> > Hi Dave,
> >
> > I fixed the crash. It was my local problem.
>
> Ah, right :)
>
> I'll take a look at your code anyway in case there's something
> else one of us didn't think of.
Thanks, Dave.
This is the branch:
https://github.com/norov/linux/tree/ilp32-4.15-rc7
SVE-related changes are mostly in patches:
arm64: ilp32: introduce ilp32-specific handlers for sigframe and ucontext
arm64: signal32: move ilp32 and aarch32 common code to separated file
arm64: signal: share lp64 signal structures and routines to ilp32
arm64: ilp32: add sys_ilp32.c and a separate table (in entry.S) to use it
Yury
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2018-01-16 16:05 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2018-01-16 16:05 UTC (permalink / raw)
To: Yury Norov
Cc: Mark Rutland, Okamoto Takayuki, Szabolcs Nagy, Catalin Marinas,
Will Deacon, H. Peter Anvin, kvmarm, linux-arch, Ingo Molnar,
Michael Kerrisk, Alan Hayward, H . J . Lu, Alexander Viro,
Thomas Gleixner, Alex Bennée, linux-arm-kernel, libc-alpha,
Ard Biesheuvel, Dmitry Safonov, Oleg Nesterov, linux-api
On Tue, Jan 16, 2018 at 01:11:49PM +0300, Yury Norov wrote:
> On Mon, Jan 15, 2018 at 05:22:01PM +0000, Dave Martin wrote:
[...]
> > I'll take a look at your code anyway in case there's something
> > else one of us didn't think of.
>
> Thanks, Dave.
>
> This is the branch:
> https://github.com/norov/linux/tree/ilp32-4.15-rc7
>
> SVE-related changes are mostly in patches:
> arm64: ilp32: introduce ilp32-specific handlers for sigframe and ucontext
> arm64: signal32: move ilp32 and aarch32 common code to separated file
> arm64: signal: share lp64 signal structures and routines to ilp32
> arm64: ilp32: add sys_ilp32.c and a separate table (in entry.S) to use it
Thanks for the pointer.
Quick review of the relevant patches below.
> From 6f566a512cbac378ccee66094b5f9124b6069275 Mon Sep 17 00:00:00 2001
> From: Andrew Pinski <apinski@cavium.com>
> Date: Tue, 24 May 2016 03:04:47 +0300
> Subject: [PATCH 17/24] arm64: ilp32: add sys_ilp32.c and a separate table (in
> entry.S) to use it
>
> Add a separate syscall-table for ILP32, which dispatches either to native
> LP64 system call implementation or to compat-syscalls, as appropriate.
>
> Signed-off-by: Andrew Pinski <Andrew.Pinski@caviumnetworks.com>
> Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
> Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
[...]
> diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
> index 778726d..d2d7336 100644
[...]
> @@ -864,14 +882,15 @@ ENDPROC(ret_to_user)
> el0_svc:
> ldr x16, [tsk, #TSK_TI_FLAGS] // load thread flags
> adrp stbl, sys_call_table // load syscall table pointer
> + ldr x19, [tsk, #TSK_TI_FLAGS]
> mov wscno, w8 // syscall number in w8
> mov wsc_nr, #__NR_syscalls
>
> #ifdef CONFIG_ARM64_SVE
> alternative_if_not ARM64_SVE
> - b el0_svc_naked
> + b el0_svc_select_table
> alternative_else_nop_endif
> - tbz x16, #TIF_SVE, el0_svc_naked // Skip unless TIF_SVE set:
> + tbz x16, #TIF_SVE, el0_svc_select_table // Skip unless TIF_SVE set:
> bic x16, x16, #_TIF_SVE // discard SVE state
> str x16, [tsk, #TSK_TI_FLAGS]
>
> @@ -887,12 +906,19 @@ alternative_else_nop_endif
> msr cpacr_el1, x9 // synchronised by eret to el0
> #endif
>
> +el0_svc_select_table:
> +#ifdef CONFIG_ARM64_ILP32
> + tst x19, #_TIF_32BIT_AARCH64
> + b.eq el0_svc_naked // We are using LP64 syscall table
Can tbz be used here?
> + adrp stbl, sys_call_ilp32_table // load ilp32 syscall table pointer
> + delouse_input_regs
> +#endif
> el0_svc_naked: // compat entry point
> stp x0, xscno, [sp, #S_ORIG_X0] // save the original x0 and syscall number
[...]
> From 6e55e1c381aa4b6e10ac5eda0a587adf5558f438 Mon Sep 17 00:00:00 2001
> From: Yury Norov <ynorov@caviumnetworks.com>
> Date: Mon, 26 Jun 2017 19:11:58 +0300
> Subject: [PATCH 18/24] arm64: signal: share lp64 signal structures and
> routines to ilp32
Nit: Please ensure that the commit message makes sense without the
subject line, so that users of Mutt etc., can see all necessary context
in the message body when drafting a reply.
> After that, it will be possible to reuse it in ilp32.
>
> Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
[...]
> +#define parse_user_sigcontext(user, sf) \
> + __parse_user_sigcontext(user, &(sf)->uc.uc_mcontext, sf)
Nit: can this #define be kept next to the function it wraps?
> +
> +struct user_ctxs {
> + struct fpsimd_context __user *fpsimd;
> + struct sve_context __user *sve;
> +};
> +
> +struct frame_record {
> + u64 fp;
> + u64 lr;
> +};
> +struct rt_sigframe_user_layout;
> +
> +int setup_extra_context(char __user *sfp, unsigned long users, char __user *userp);
> +int __parse_user_sigcontext(struct user_ctxs *user,
> + struct sigcontext __user const *sc,
> + void __user const *sigframe_base);
[...]
> diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
[...]
> +int setup_extra_context(char __user *sfp, unsigned long users, char __user *userp)
> +{
> + int err =0;
Nit: missing space.
Also, while "user<blah>" seemed OK as a local variable name, it now
looks rather obscure as a function parameter name, since the meaning of
the parameter is not so obvious.
"users" is really the total sigframe size, so "sf_size" may be a
reasonable name.
"extrap" might be a slightly better name for "userp", since this is not
a general-purpose cursor and must point to the base address computed for
the extra_context block.
(I'm open to better suggestions though.)
> + struct extra_context __user *extra;
> + struct _aarch64_ctx __user *end;
> + u64 extra_datap;
> + u32 extra_size;
> +
> + extra = (struct extra_context __user *)userp;
> + userp += EXTRA_CONTEXT_SIZE;
> +
> + end = (struct _aarch64_ctx __user *)userp;
> + userp += TERMINATOR_SIZE;
> +
> + /*
> + * extra_datap is just written to the signal frame.
> + * The value gets cast back to a void __user *
> + * during sigreturn.
> + */
> + extra_datap = (__force u64)userp;
> + extra_size = sfp + round_up(users, 16) - userp;
> +
> + __put_user_error(EXTRA_MAGIC, &extra->head.magic, err);
> + __put_user_error(EXTRA_CONTEXT_SIZE, &extra->head.size, err);
> + __put_user_error(extra_datap, &extra->datap, err);
> + __put_user_error(extra_size, &extra->size, err);
> +
> + /* Add the terminator */
> + __put_user_error(0, &end->magic, err);
> + __put_user_error(0, &end->size, err);
> +
> + return err;
> +}
[...]
> @@ -652,39 +656,9 @@ static int setup_sigframe(struct rt_sigframe_user_layout *user,
> err |= preserve_sve_context(sve_ctx);
> }
>
> - if (err == 0 && user->extra_offset) {
> - char __user *sfp = (char __user *)user->sigframe;
> - char __user *userp =
> - apply_user_offset(user, user->extra_offset);
> -
> - struct extra_context __user *extra;
> - struct _aarch64_ctx __user *end;
> - u64 extra_datap;
> - u32 extra_size;
> -
> - extra = (struct extra_context __user *)userp;
> - userp += EXTRA_CONTEXT_SIZE;
> -
> - end = (struct _aarch64_ctx __user *)userp;
> - userp += TERMINATOR_SIZE;
> -
> - /*
> - * extra_datap is just written to the signal frame.
> - * The value gets cast back to a void __user *
> - * during sigreturn.
> - */
> - extra_datap = (__force u64)userp;
> - extra_size = sfp + round_up(user->size, 16) - userp;
> -
> - __put_user_error(EXTRA_MAGIC, &extra->head.magic, err);
> - __put_user_error(EXTRA_CONTEXT_SIZE, &extra->head.size, err);
> - __put_user_error(extra_datap, &extra->datap, err);
> - __put_user_error(extra_size, &extra->size, err);
> -
> - /* Add the terminator */
> - __put_user_error(0, &end->magic, err);
> - __put_user_error(0, &end->size, err);
> - }
> + if (err == 0 && user->extra_offset)
> + setup_extra_context((char *) user->sigframe, user->size,
> + (char *) apply_user_offset(user, user->extra_offset));
Nit: no space after (type *) please.
Also, can we have (char __user *)? This is more "correct" because these
arguments are not valid kernel pointers. Keeping the __user may avoid
sparse warnings. (I've not tried to build the code yet, so I don't know
whether sparse actually complains about __user being cast on and off
here.)
[...]
> From 735931121210a692038859448bf9f4ac5905eb73 Mon Sep 17 00:00:00 2001
> From: Yury Norov <ynorov@caviumnetworks.comk>
> Date: Tue, 24 May 2016 03:04:50 +0300
> Subject: [PATCH 20/24] arm64: ilp32: introduce ilp32-specific handlers for
> sigframe and ucontext
>
> ILP32 uses AARCH32 compat structures and syscall handlers for signals.
> But ILP32 struct rt_sigframe and ucontext differs from both LP64 and
> AARCH32. So some specific mechanism is needed to take care of it.
>
> Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
The code here looks reasonably correct, but there is a lot of
unnecessary duplication of code that should really be common.
This code is security-critical and tricky to get right, so we don't
want to have to maintain and test two independent implementations of
anything if we can possibly avoid it.
I think there may at least one change in the LP64 code that has not
been propagated here (the call to
fpsimd_signal_preserve_current_state() in setup_rt_frame()). There
will likely be more such cases in the future.
[...]
diff --git a/arch/arm64/kernel/signal_ilp32.c b/arch/arm64/kernel/signal_ilp32.c
new file mode 100644
index 0000000..a1cb058
> --- /dev/null
> +++ b/arch/arm64/kernel/signal_ilp32.c
[...]
> +#define BASE_SIGFRAME_SIZE round_up(sizeof(struct ilp32_rt_sigframe), 16)
> +
> +struct ilp32_ucontext {
> + u32 uc_flags;
> + u32 uc_link;
> + compat_stack_t uc_stack;
> + compat_sigset_t uc_sigmask;
> + /* glibc uses a 1024-bit sigset_t */
> + __u8 __unused[1024 / 8 - sizeof(compat_sigset_t)];
> + /* last for future expansion */
> + struct sigcontext uc_mcontext;
> +};
> +
> +struct ilp32_rt_sigframe {
> + struct compat_siginfo info;
> + struct ilp32_ucontext uc;
> +};
> +
> +struct ilp32_rt_sigframe_user_layout {
> + struct ilp32_rt_sigframe __user *sigframe;
I think much of the duplication here flows from the fact that this
struct currently has a different type for ILP32 versus LP64, even
though all the important contents of the structure are equivalent for
the two cases.
Can we replace the sigframe pointer with a void __user *, or union {
struct rt_sigframe __user *;
struct ilp32_rt_sigframe __user *;
} ?
Putting a pointer to sigcontext in here may also help, since it
looks the same for both cases: only its location changes (I think).
This would allow us to use the same sigframe_user_layout struct for
the lp64 and ilp32 cases, which will make it easier to share code.
The __reserved[] and extra_context blocks and the records in them
should be handled identically for the two ABIs: the only thing that
should differ is the offset of __reserved[] in the complete signal
frame.
We should try hard to make as much code as possible generic here. I
won't comment on the individual functions for now: I think they can
all be mostly or completely eliminated.
[...]
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
* Re: [PATCH v5 00/30] ARM Scalable Vector Extension (SVE)
@ 2018-01-16 16:05 ` Dave Martin
0 siblings, 0 replies; 174+ messages in thread
From: Dave Martin @ 2018-01-16 16:05 UTC (permalink / raw)
To: Yury Norov
Cc: Mark Rutland, Okamoto Takayuki, Szabolcs Nagy, Catalin Marinas,
Will Deacon, H. Peter Anvin, kvmarm, linux-arch, Ingo Molnar,
Michael Kerrisk, Alan Hayward, H . J . Lu, Alexander Viro,
Thomas Gleixner, Alex Bennée, linux-arm-kernel, libc-alpha,
Ard Biesheuvel, Dmitry Safonov, Oleg Nesterov, linux-api,
Christoffer Dall
On Tue, Jan 16, 2018 at 01:11:49PM +0300, Yury Norov wrote:
> On Mon, Jan 15, 2018 at 05:22:01PM +0000, Dave Martin wrote:
[...]
> > I'll take a look at your code anyway in case there's something
> > else one of us didn't think of.
>
> Thanks, Dave.
>
> This is the branch:
> https://github.com/norov/linux/tree/ilp32-4.15-rc7
>
> SVE-related changes are mostly in patches:
> arm64: ilp32: introduce ilp32-specific handlers for sigframe and ucontext
> arm64: signal32: move ilp32 and aarch32 common code to separated file
> arm64: signal: share lp64 signal structures and routines to ilp32
> arm64: ilp32: add sys_ilp32.c and a separate table (in entry.S) to use it
Thanks for the pointer.
Quick review of the relevant patches below.
> From 6f566a512cbac378ccee66094b5f9124b6069275 Mon Sep 17 00:00:00 2001
> From: Andrew Pinski <apinski@cavium.com>
> Date: Tue, 24 May 2016 03:04:47 +0300
> Subject: [PATCH 17/24] arm64: ilp32: add sys_ilp32.c and a separate table (in
> entry.S) to use it
>
> Add a separate syscall-table for ILP32, which dispatches either to native
> LP64 system call implementation or to compat-syscalls, as appropriate.
>
> Signed-off-by: Andrew Pinski <Andrew.Pinski@caviumnetworks.com>
> Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
> Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
[...]
> diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
> index 778726d..d2d7336 100644
[...]
> @@ -864,14 +882,15 @@ ENDPROC(ret_to_user)
> el0_svc:
> ldr x16, [tsk, #TSK_TI_FLAGS] // load thread flags
> adrp stbl, sys_call_table // load syscall table pointer
> + ldr x19, [tsk, #TSK_TI_FLAGS]
> mov wscno, w8 // syscall number in w8
> mov wsc_nr, #__NR_syscalls
>
> #ifdef CONFIG_ARM64_SVE
> alternative_if_not ARM64_SVE
> - b el0_svc_naked
> + b el0_svc_select_table
> alternative_else_nop_endif
> - tbz x16, #TIF_SVE, el0_svc_naked // Skip unless TIF_SVE set:
> + tbz x16, #TIF_SVE, el0_svc_select_table // Skip unless TIF_SVE set:
> bic x16, x16, #_TIF_SVE // discard SVE state
> str x16, [tsk, #TSK_TI_FLAGS]
>
> @@ -887,12 +906,19 @@ alternative_else_nop_endif
> msr cpacr_el1, x9 // synchronised by eret to el0
> #endif
>
> +el0_svc_select_table:
> +#ifdef CONFIG_ARM64_ILP32
> + tst x19, #_TIF_32BIT_AARCH64
> + b.eq el0_svc_naked // We are using LP64 syscall table
Can tbz be used here?
> + adrp stbl, sys_call_ilp32_table // load ilp32 syscall table pointer
> + delouse_input_regs
> +#endif
> el0_svc_naked: // compat entry point
> stp x0, xscno, [sp, #S_ORIG_X0] // save the original x0 and syscall number
[...]
> From 6e55e1c381aa4b6e10ac5eda0a587adf5558f438 Mon Sep 17 00:00:00 2001
> From: Yury Norov <ynorov@caviumnetworks.com>
> Date: Mon, 26 Jun 2017 19:11:58 +0300
> Subject: [PATCH 18/24] arm64: signal: share lp64 signal structures and
> routines to ilp32
Nit: Please ensure that the commit message makes sense without the
subject line, so that users of Mutt etc., can see all necessary context
in the message body when drafting a reply.
> After that, it will be possible to reuse it in ilp32.
>
> Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
[...]
> +#define parse_user_sigcontext(user, sf) \
> + __parse_user_sigcontext(user, &(sf)->uc.uc_mcontext, sf)
Nit: can this #define be kept next to the function it wraps?
> +
> +struct user_ctxs {
> + struct fpsimd_context __user *fpsimd;
> + struct sve_context __user *sve;
> +};
> +
> +struct frame_record {
> + u64 fp;
> + u64 lr;
> +};
> +struct rt_sigframe_user_layout;
> +
> +int setup_extra_context(char __user *sfp, unsigned long users, char __user *userp);
> +int __parse_user_sigcontext(struct user_ctxs *user,
> + struct sigcontext __user const *sc,
> + void __user const *sigframe_base);
[...]
> diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
[...]
> +int setup_extra_context(char __user *sfp, unsigned long users, char __user *userp)
> +{
> + int err =0;
Nit: missing space.
Also, while "user<blah>" seemed OK as a local variable name, it now
looks rather obscure as a function parameter name, since the meaning of
the parameter is not so obvious.
"users" is really the total sigframe size, so "sf_size" may be a
reasonable name.
"extrap" might be a slightly better name for "userp", since this is not
a general-purpose cursor and must point to the base address computed for
the extra_context block.
(I'm open to better suggestions though.)
> + struct extra_context __user *extra;
> + struct _aarch64_ctx __user *end;
> + u64 extra_datap;
> + u32 extra_size;
> +
> + extra = (struct extra_context __user *)userp;
> + userp += EXTRA_CONTEXT_SIZE;
> +
> + end = (struct _aarch64_ctx __user *)userp;
> + userp += TERMINATOR_SIZE;
> +
> + /*
> + * extra_datap is just written to the signal frame.
> + * The value gets cast back to a void __user *
> + * during sigreturn.
> + */
> + extra_datap = (__force u64)userp;
> + extra_size = sfp + round_up(users, 16) - userp;
> +
> + __put_user_error(EXTRA_MAGIC, &extra->head.magic, err);
> + __put_user_error(EXTRA_CONTEXT_SIZE, &extra->head.size, err);
> + __put_user_error(extra_datap, &extra->datap, err);
> + __put_user_error(extra_size, &extra->size, err);
> +
> + /* Add the terminator */
> + __put_user_error(0, &end->magic, err);
> + __put_user_error(0, &end->size, err);
> +
> + return err;
> +}
[...]
> @@ -652,39 +656,9 @@ static int setup_sigframe(struct rt_sigframe_user_layout *user,
> err |= preserve_sve_context(sve_ctx);
> }
>
> - if (err == 0 && user->extra_offset) {
> - char __user *sfp = (char __user *)user->sigframe;
> - char __user *userp =
> - apply_user_offset(user, user->extra_offset);
> -
> - struct extra_context __user *extra;
> - struct _aarch64_ctx __user *end;
> - u64 extra_datap;
> - u32 extra_size;
> -
> - extra = (struct extra_context __user *)userp;
> - userp += EXTRA_CONTEXT_SIZE;
> -
> - end = (struct _aarch64_ctx __user *)userp;
> - userp += TERMINATOR_SIZE;
> -
> - /*
> - * extra_datap is just written to the signal frame.
> - * The value gets cast back to a void __user *
> - * during sigreturn.
> - */
> - extra_datap = (__force u64)userp;
> - extra_size = sfp + round_up(user->size, 16) - userp;
> -
> - __put_user_error(EXTRA_MAGIC, &extra->head.magic, err);
> - __put_user_error(EXTRA_CONTEXT_SIZE, &extra->head.size, err);
> - __put_user_error(extra_datap, &extra->datap, err);
> - __put_user_error(extra_size, &extra->size, err);
> -
> - /* Add the terminator */
> - __put_user_error(0, &end->magic, err);
> - __put_user_error(0, &end->size, err);
> - }
> + if (err == 0 && user->extra_offset)
> + setup_extra_context((char *) user->sigframe, user->size,
> + (char *) apply_user_offset(user, user->extra_offset));
Nit: no space after (type *) please.
Also, can we have (char __user *)? This is more "correct" because these
arguments are not valid kernel pointers. Keeping the __user may avoid
sparse warnings. (I've not tried to build the code yet, so I don't know
whether sparse actually complains about __user being cast on and off
here.)
[...]
> From 735931121210a692038859448bf9f4ac5905eb73 Mon Sep 17 00:00:00 2001
> From: Yury Norov <ynorov@caviumnetworks.comk>
> Date: Tue, 24 May 2016 03:04:50 +0300
> Subject: [PATCH 20/24] arm64: ilp32: introduce ilp32-specific handlers for
> sigframe and ucontext
>
> ILP32 uses AARCH32 compat structures and syscall handlers for signals.
> But ILP32 struct rt_sigframe and ucontext differs from both LP64 and
> AARCH32. So some specific mechanism is needed to take care of it.
>
> Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
The code here looks reasonably correct, but there is a lot of
unnecessary duplication of code that should really be common.
This code is security-critical and tricky to get right, so we don't
want to have to maintain and test two independent implementations of
anything if we can possibly avoid it.
I think there may at least one change in the LP64 code that has not
been propagated here (the call to
fpsimd_signal_preserve_current_state() in setup_rt_frame()). There
will likely be more such cases in the future.
[...]
diff --git a/arch/arm64/kernel/signal_ilp32.c b/arch/arm64/kernel/signal_ilp32.c
new file mode 100644
index 0000000..a1cb058
> --- /dev/null
> +++ b/arch/arm64/kernel/signal_ilp32.c
[...]
> +#define BASE_SIGFRAME_SIZE round_up(sizeof(struct ilp32_rt_sigframe), 16)
> +
> +struct ilp32_ucontext {
> + u32 uc_flags;
> + u32 uc_link;
> + compat_stack_t uc_stack;
> + compat_sigset_t uc_sigmask;
> + /* glibc uses a 1024-bit sigset_t */
> + __u8 __unused[1024 / 8 - sizeof(compat_sigset_t)];
> + /* last for future expansion */
> + struct sigcontext uc_mcontext;
> +};
> +
> +struct ilp32_rt_sigframe {
> + struct compat_siginfo info;
> + struct ilp32_ucontext uc;
> +};
> +
> +struct ilp32_rt_sigframe_user_layout {
> + struct ilp32_rt_sigframe __user *sigframe;
I think much of the duplication here flows from the fact that this
struct currently has a different type for ILP32 versus LP64, even
though all the important contents of the structure are equivalent for
the two cases.
Can we replace the sigframe pointer with a void __user *, or union {
struct rt_sigframe __user *;
struct ilp32_rt_sigframe __user *;
} ?
Putting a pointer to sigcontext in here may also help, since it
looks the same for both cases: only its location changes (I think).
This would allow us to use the same sigframe_user_layout struct for
the lp64 and ilp32 cases, which will make it easier to share code.
The __reserved[] and extra_context blocks and the records in them
should be handled identically for the two ABIs: the only thing that
should differ is the offset of __reserved[] in the complete signal
frame.
We should try hard to make as much code as possible generic here. I
won't comment on the individual functions for now: I think they can
all be mostly or completely eliminated.
[...]
Cheers
---Dave
^ permalink raw reply [flat|nested] 174+ messages in thread
end of thread, other threads:[~2018-01-16 16:05 UTC | newest]
Thread overview: 174+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-10-31 15:50 [PATCH v5 00/30] ARM Scalable Vector Extension (SVE) Dave Martin
2017-10-31 15:50 ` Dave Martin
2017-10-31 15:50 ` Dave Martin
2017-10-31 15:50 ` [PATCH v5 01/30] regset: Add support for dynamically sized regsets Dave Martin
2017-10-31 15:50 ` Dave Martin
2017-11-01 11:42 ` Catalin Marinas
2017-11-01 11:42 ` Catalin Marinas
2017-11-01 13:16 ` Dave Martin
2017-11-01 13:16 ` Dave Martin
2017-11-08 11:50 ` Alex Bennée
2017-11-08 11:50 ` Alex Bennée
2017-11-08 11:50 ` Alex Bennée
2017-10-31 15:50 ` [PATCH v5 02/30] arm64: fpsimd: Correctly annotate exception helpers called from asm Dave Martin
2017-10-31 15:50 ` Dave Martin
2017-10-31 15:50 ` Dave Martin
2017-11-01 11:42 ` Catalin Marinas
2017-11-01 11:42 ` Catalin Marinas
2017-10-31 15:50 ` [PATCH v5 03/30] arm64: signal: Verify extra data is user-readable in sys_rt_sigreturn Dave Martin
2017-10-31 15:50 ` Dave Martin
2017-10-31 15:50 ` Dave Martin
2017-11-01 11:43 ` Catalin Marinas
2017-11-01 11:43 ` Catalin Marinas
2017-10-31 15:50 ` [PATCH v5 04/30] arm64: KVM: Hide unsupported AArch64 CPU features from guests Dave Martin
2017-10-31 15:50 ` Dave Martin
2017-11-01 4:47 ` Christoffer Dall
2017-11-01 4:47 ` Christoffer Dall
2017-11-01 10:26 ` Dave Martin
2017-11-01 10:26 ` Dave Martin
2017-11-02 8:15 ` Christoffer Dall
2017-11-02 8:15 ` Christoffer Dall
2017-11-02 9:20 ` Dave Martin
2017-11-02 9:20 ` Dave Martin
2017-11-02 11:01 ` Dave Martin
2017-11-02 11:01 ` Dave Martin
2017-11-02 19:18 ` Christoffer Dall
2017-11-02 19:18 ` Christoffer Dall
2017-10-31 15:50 ` [PATCH v5 05/30] arm64: efi: Add missing Kconfig dependency on KERNEL_MODE_NEON Dave Martin
2017-10-31 15:50 ` Dave Martin
2017-10-31 15:50 ` Dave Martin
2017-10-31 15:50 ` [PATCH v5 06/30] arm64: Port deprecated instruction emulation to new sysctl interface Dave Martin
2017-10-31 15:50 ` Dave Martin
2017-10-31 15:50 ` [PATCH v5 07/30] arm64: fpsimd: Simplify uses of {set,clear}_ti_thread_flag() Dave Martin
2017-10-31 15:50 ` [PATCH v5 07/30] arm64: fpsimd: Simplify uses of {set, clear}_ti_thread_flag() Dave Martin
2017-10-31 15:51 ` [PATCH v5 08/30] arm64/sve: System register and exception syndrome definitions Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` [PATCH v5 09/30] arm64/sve: Low-level SVE architectural state manipulation functions Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` [PATCH v5 10/30] arm64/sve: Kconfig update and conditional compilation support Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` [PATCH v5 11/30] arm64/sve: Signal frame and context structure definition Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-11-08 16:34 ` Alex Bennée
2017-11-08 16:34 ` Alex Bennée
2017-11-08 16:34 ` Alex Bennée
2017-10-31 15:51 ` [PATCH v5 12/30] arm64/sve: Low-level CPU setup Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-11-08 16:37 ` Alex Bennée
2017-11-08 16:37 ` Alex Bennée
2017-11-08 16:37 ` Alex Bennée
2017-10-31 15:51 ` [PATCH v5 13/30] arm64/sve: Core task context handling Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-11-09 17:16 ` Alex Bennée
2017-11-09 17:16 ` Alex Bennée
2017-11-09 17:16 ` Alex Bennée
2017-11-09 17:56 ` Dave Martin
2017-11-09 17:56 ` Dave Martin
2017-11-09 18:06 ` Alex Bennée
2017-11-09 18:06 ` Alex Bennée
2017-11-09 18:06 ` Alex Bennée
2017-10-31 15:51 ` [PATCH v5 14/30] arm64/sve: Support vector length resetting for new processes Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` [PATCH v5 15/30] arm64/sve: Signal handling support Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-11-01 14:33 ` Catalin Marinas
2017-11-01 14:33 ` Catalin Marinas
2017-11-07 13:22 ` Alex Bennée
2017-11-07 13:22 ` Alex Bennée
2017-11-07 13:22 ` Alex Bennée
2017-11-08 16:11 ` Dave Martin
2017-11-08 16:11 ` Dave Martin
2017-12-06 19:56 ` Kees Cook
2017-12-06 19:56 ` Kees Cook
2017-12-07 10:49 ` Will Deacon
2017-12-07 10:49 ` Will Deacon
2017-12-07 12:03 ` Dave Martin
2017-12-07 12:03 ` Dave Martin
2017-12-07 18:50 ` Kees Cook
2017-12-07 18:50 ` Kees Cook
2017-12-11 14:07 ` Will Deacon
2017-12-11 14:07 ` Will Deacon
2017-12-11 19:23 ` Kees Cook
2017-12-11 19:23 ` Kees Cook
2017-12-12 10:40 ` Will Deacon
2017-12-12 10:40 ` Will Deacon
2017-12-12 11:11 ` Dave Martin
2017-12-12 11:11 ` Dave Martin
2017-12-12 19:36 ` Kees Cook
2017-12-12 19:36 ` Kees Cook
2017-12-12 19:36 ` Kees Cook
2017-10-31 15:51 ` [PATCH v5 16/30] arm64/sve: Backend logic for setting the vector length Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-11-10 10:27 ` Alex Bennée
2017-11-10 10:27 ` Alex Bennée
2017-11-10 10:27 ` Alex Bennée
2017-10-31 15:51 ` [PATCH v5 17/30] arm64: cpufeature: Move sys_caps_initialised declarations Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` [PATCH v5 18/30] arm64/sve: Probe SVE capabilities and usable vector lengths Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` [PATCH v5 19/30] arm64/sve: Preserve SVE registers around kernel-mode NEON use Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` [PATCH v5 20/30] arm64/sve: Preserve SVE registers around EFI runtime service calls Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` [PATCH v5 21/30] arm64/sve: ptrace and ELF coredump support Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` [PATCH v5 22/30] arm64/sve: Add prctl controls for userspace vector length management Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` [PATCH v5 23/30] arm64/sve: Add sysctl to set the default vector length for new processes Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` [PATCH v5 24/30] arm64/sve: KVM: Prevent guests from using SVE Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` [PATCH v5 25/30] arm64/sve: KVM: Treat guest SVE use as undefined instruction execution Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` [PATCH v5 26/30] arm64/sve: KVM: Hide SVE from CPU features exposed to guests Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` [PATCH v5 27/30] arm64/sve: Detect SVE and activate runtime support Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` [RFC PATCH v5 29/30] arm64: signal: Report signal frame size to userspace via auxv Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` [RFC PATCH v5 30/30] arm64/sve: signal: Include SVE when computing AT_MINSIGSTKSZ Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` Dave Martin
[not found] ` <1509465082-30427-1-git-send-email-Dave.Martin-5wv7dgnIgG8@public.gmane.org>
2017-10-31 15:51 ` [PATCH v5 28/30] arm64/sve: Add documentation Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-10-31 15:51 ` Dave Martin
2017-11-02 16:32 ` [PATCH v5 00/30] ARM Scalable Vector Extension (SVE) Will Deacon
2017-11-02 16:32 ` Will Deacon
2017-11-02 16:32 ` Will Deacon
[not found] ` <20171102163248.GB595-5wv7dgnIgG8@public.gmane.org>
2017-11-02 17:04 ` Dave P Martin
2017-11-02 17:04 ` Dave P Martin
2017-11-02 17:04 ` Dave P Martin
2017-11-29 15:04 ` Alex Bennée
2017-11-29 15:04 ` Alex Bennée
2017-11-29 15:04 ` Alex Bennée
[not found] ` <877eu9dt3n.fsf-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2017-11-29 15:21 ` Will Deacon
2017-11-29 15:21 ` Will Deacon
2017-11-29 15:21 ` Will Deacon
[not found] ` <20171129152140.GD10650-5wv7dgnIgG8@public.gmane.org>
2017-11-29 15:37 ` Dave Martin
2017-11-29 15:37 ` Dave Martin
2017-11-29 15:37 ` Dave Martin
2018-01-08 14:49 ` Yury Norov
2018-01-08 14:49 ` Yury Norov
2018-01-08 14:49 ` Yury Norov
2018-01-09 16:51 ` Yury Norov
2018-01-09 16:51 ` Yury Norov
2018-01-09 16:51 ` Yury Norov
2018-01-15 17:22 ` Dave Martin
2018-01-15 17:22 ` Dave Martin
2018-01-15 17:22 ` Dave Martin
[not found] ` <20180115172201.GW22781-M5GwZQ6tE7x5pKCnmE3YQBJ8xKzm50AiAL8bYrjMMd8@public.gmane.org>
2018-01-16 10:11 ` Yury Norov
2018-01-16 10:11 ` Yury Norov
2018-01-16 16:05 ` Dave Martin
2018-01-16 16:05 ` Dave Martin
2018-01-15 16:55 ` Dave Martin
2018-01-15 16:55 ` Dave Martin
2018-01-15 16:55 ` Dave Martin
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.