All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Pankaj Dubey <pankaj.dubey@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, krzk@kernel.org,
	javier@osg.samsung.com, kgene@kernel.org, thomas.ab@samsung.com,
	myungjoo.ham@samsung.com,
	Michael Turquette <mturquette@baylibre.com>,
	devicetree@vger.kernel.org, linux-clk@vger.kernel.org
Subject: Re: [PATCH 2/6] dt-bindings: clk: max8997: Add DT binding documentation
Date: Mon, 14 Nov 2016 10:15:46 -0600	[thread overview]
Message-ID: <20161114161546.oitvons6tvlazgsb@rob-hp-laptop> (raw)
In-Reply-To: <1478513376-14307-3-git-send-email-pankaj.dubey@samsung.com>

On Mon, Nov 07, 2016 at 03:39:32PM +0530, Pankaj Dubey wrote:
> Add Device Tree binding documentation for the clocks
> outputs in the Maxim-8997 Power Management IC.
> 
> CC: Michael Turquette <mturquette@baylibre.com>
> CC: Rob Herring <robh+dt@kernel.org>
> CC: devicetree@vger.kernel.org
> CC: linux-clk@vger.kernel.org
> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
> ---
>  .../devicetree/bindings/clock/maxim,max8997.txt    | 44 ++++++++++++++++++++++
>  .../bindings/regulator/max8997-regulator.txt       |  3 ++
>  2 files changed, 47 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/maxim,max8997.txt
> 
> diff --git a/Documentation/devicetree/bindings/clock/maxim,max8997.txt b/Documentation/devicetree/bindings/clock/maxim,max8997.txt
> new file mode 100644
> index 0000000..d2e2a74
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/maxim,max8997.txt
> @@ -0,0 +1,44 @@
> +Binding for Maxim MAX8997 32k clock generator block
> +
> +This is a part of device tree bindings of MAX8997 multi-function device.
> +More information can be found in bindings/regulator/max8997-regulator.txt file.
> +
> +The MAX8997 contains two 32.768khz clock outputs that can be controlled
> +(gated/ungated) over I2C.
> +
> +Following properties should be presend in main device node of the MFD chip.
> +
> +Required properties:
> +
> +- #clock-cells: from common clock binding; shall be set to 1.
> +
> +Optional properties:
> +- clock-output-names: From common clock binding.
> +
> +Each clock is assigned an identifier and client nodes can use this identifier
> +to specify the clock which they consume. Following indices are allowed:
> +    - 0: 32khz_ap clock,
> +    - 1: 32khz_cp clock,
> +
> +Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max8997.h
> +header and can be used in device tree sources.
> +
> +Example: Node of the MFD chip
> +
> +	max8997: max8997_pmic@66 {

pmic@66 {

With that:

Acked-by: Rob Herring <robh@kernel.org>

WARNING: multiple messages have this Message-ID (diff)
From: robh@kernel.org (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/6] dt-bindings: clk: max8997: Add DT binding documentation
Date: Mon, 14 Nov 2016 10:15:46 -0600	[thread overview]
Message-ID: <20161114161546.oitvons6tvlazgsb@rob-hp-laptop> (raw)
In-Reply-To: <1478513376-14307-3-git-send-email-pankaj.dubey@samsung.com>

On Mon, Nov 07, 2016 at 03:39:32PM +0530, Pankaj Dubey wrote:
> Add Device Tree binding documentation for the clocks
> outputs in the Maxim-8997 Power Management IC.
> 
> CC: Michael Turquette <mturquette@baylibre.com>
> CC: Rob Herring <robh+dt@kernel.org>
> CC: devicetree at vger.kernel.org
> CC: linux-clk at vger.kernel.org
> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
> ---
>  .../devicetree/bindings/clock/maxim,max8997.txt    | 44 ++++++++++++++++++++++
>  .../bindings/regulator/max8997-regulator.txt       |  3 ++
>  2 files changed, 47 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/maxim,max8997.txt
> 
> diff --git a/Documentation/devicetree/bindings/clock/maxim,max8997.txt b/Documentation/devicetree/bindings/clock/maxim,max8997.txt
> new file mode 100644
> index 0000000..d2e2a74
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/maxim,max8997.txt
> @@ -0,0 +1,44 @@
> +Binding for Maxim MAX8997 32k clock generator block
> +
> +This is a part of device tree bindings of MAX8997 multi-function device.
> +More information can be found in bindings/regulator/max8997-regulator.txt file.
> +
> +The MAX8997 contains two 32.768khz clock outputs that can be controlled
> +(gated/ungated) over I2C.
> +
> +Following properties should be presend in main device node of the MFD chip.
> +
> +Required properties:
> +
> +- #clock-cells: from common clock binding; shall be set to 1.
> +
> +Optional properties:
> +- clock-output-names: From common clock binding.
> +
> +Each clock is assigned an identifier and client nodes can use this identifier
> +to specify the clock which they consume. Following indices are allowed:
> +    - 0: 32khz_ap clock,
> +    - 1: 32khz_cp clock,
> +
> +Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max8997.h
> +header and can be used in device tree sources.
> +
> +Example: Node of the MFD chip
> +
> +	max8997: max8997_pmic at 66 {

pmic at 66 {

With that:

Acked-by: Rob Herring <robh@kernel.org>

  parent reply	other threads:[~2016-11-14 16:15 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-07 10:09 [PATCH 0/6] Add support for MAX8997 Clock Driver Pankaj Dubey
2016-11-07 10:09 ` Pankaj Dubey
2016-11-07 10:09 ` [PATCH 1/6] mfd: max8997: Initialize max8997 register map Pankaj Dubey
2016-11-07 10:09   ` Pankaj Dubey
2016-11-07 14:22   ` Javier Martinez Canillas
2016-11-07 14:22     ` Javier Martinez Canillas
2016-11-07 17:12     ` Pankaj Dubey
2016-11-07 17:12       ` Pankaj Dubey
2016-11-07 10:09 ` [PATCH 5/6] mfd: max8997: Add max8997-clk name in mfd_cell Pankaj Dubey
2016-11-07 10:09   ` Pankaj Dubey
2016-11-07 15:08   ` Javier Martinez Canillas
2016-11-07 15:08     ` Javier Martinez Canillas
     [not found] ` <1478513376-14307-1-git-send-email-pankaj.dubey-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-11-07 10:09   ` [PATCH 2/6] dt-bindings: clk: max8997: Add DT binding documentation Pankaj Dubey
2016-11-07 10:09     ` Pankaj Dubey
2016-11-07 10:09     ` Pankaj Dubey
2016-11-07 14:47     ` Javier Martinez Canillas
2016-11-07 14:47       ` Javier Martinez Canillas
2016-11-14 16:15     ` Rob Herring [this message]
2016-11-14 16:15       ` Rob Herring
2016-11-17  2:17       ` pankaj.dubey
2016-11-17  2:17         ` pankaj.dubey
2016-11-07 10:09   ` [PATCH 3/6] clk: Add driver for Maxim-8997 PMIC clocks Pankaj Dubey
2016-11-07 10:09     ` Pankaj Dubey
2016-11-07 10:09     ` Pankaj Dubey
2016-11-07 15:01     ` Javier Martinez Canillas
2016-11-07 15:01       ` Javier Martinez Canillas
2016-11-07 15:01       ` Javier Martinez Canillas
     [not found]       ` <63750c2f-35cb-91ab-276b-c788f51081cb-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org>
2016-11-07 17:20         ` Pankaj Dubey
2016-11-07 17:20           ` Pankaj Dubey
2016-11-07 17:20           ` Pankaj Dubey
2016-11-07 17:41     ` Krzysztof Kozlowski
2016-11-07 17:41       ` Krzysztof Kozlowski
2016-11-07 10:09   ` [PATCH 4/6] ARM: dts: Add clock provider specific properties to max8997 node Pankaj Dubey
2016-11-07 10:09     ` Pankaj Dubey
     [not found]     ` <1478513376-14307-5-git-send-email-pankaj.dubey-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-11-07 15:07       ` Javier Martinez Canillas
2016-11-07 15:07         ` Javier Martinez Canillas
2016-11-07 10:09   ` [PATCH 6/6] ARM: dts: Extend the S3C RTC node with rtc_src clock Pankaj Dubey
2016-11-07 10:09     ` Pankaj Dubey
2016-11-07 15:09     ` Javier Martinez Canillas
2016-11-07 15:09       ` Javier Martinez Canillas
2016-11-07 17:44     ` Krzysztof Kozlowski
2016-11-07 17:44       ` Krzysztof Kozlowski
2016-11-07 17:27 ` [PATCH 0/6] Add support for MAX8997 Clock Driver Krzysztof Kozlowski
2016-11-07 17:27   ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161114161546.oitvons6tvlazgsb@rob-hp-laptop \
    --to=robh@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=javier@osg.samsung.com \
    --cc=kgene@kernel.org \
    --cc=krzk@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=myungjoo.ham@samsung.com \
    --cc=pankaj.dubey@samsung.com \
    --cc=thomas.ab@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.