All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pankaj Dubey <pankaj.dubey-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
To: Javier Martinez Canillas
	<javier-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org>
Cc: linux-samsung-soc
	<linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	"linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org"
	<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	"thomas.ab-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org"
	<thomas.ab-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
	Kukjin Kim <kgene-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Michael Turquette
	<mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
	Krzysztof Kozlowski
	<krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	myungjoo.ham-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org,
	linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 3/6] clk: Add driver for Maxim-8997 PMIC clocks
Date: Mon, 7 Nov 2016 22:50:58 +0530	[thread overview]
Message-ID: <CAGcde9EkEsvJ2kBpNvd+bEZj0nbpgmFu1zBe+RQz+Kij9WxHMA@mail.gmail.com> (raw)
In-Reply-To: <63750c2f-35cb-91ab-276b-c788f51081cb-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org>

Hi Javier,

On 7 November 2016 at 20:31, Javier Martinez Canillas
<javier-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org> wrote:
> Hello Pankaj,
>
> On 11/07/2016 07:09 AM, Pankaj Dubey wrote:
>> The MAX8997 PMIC has 32.786kHz crystal oscillator which provides an
>> accurate low frequency clock for MAX8997 internal circuit as well as
>> external circuit. This patch adds support for these two clocks.
>>
>> CC: Michael Turquette <mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
>> CC: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
>> CC: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> CC: linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> Signed-off-by: Pankaj Dubey <pankaj.dubey-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
>> ---
>
> What kernel version are you basing this on? The Maxim common clock code

This patch series, I have prepared on Krzysztof's for-next which is 4.9-rc1,

> is going away for v4.9 and instead the clk-max77686 driver supports both
> 77686 and 77802 clocks. See commit 8ad313fe4e00 ("clk: max77686: Combine
> Maxim max77686 and max77802 driver").
>
> Since the 8997 clock IP looks very similar to 77802 AFAICT, you should
> also extend the clk-max77686 driver to have 8997 support.
>

I was not aware of this change. I will check this and if I can
reuse/extend max77686 for 8997 I will do it.

Thanks,
Pankaj Dubey

> Best regards,
> --
> Javier Martinez Canillas
> Open Source Group
> Samsung Research America
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: Pankaj Dubey <pankaj.dubey@samsung.com>
To: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: linux-samsung-soc <linux-samsung-soc@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>,
	devicetree@vger.kernel.org,
	"thomas.ab@samsung.com" <thomas.ab@samsung.com>,
	Kukjin Kim <kgene@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	myungjoo.ham@samsung.com, linux-clk@vger.kernel.org
Subject: Re: [PATCH 3/6] clk: Add driver for Maxim-8997 PMIC clocks
Date: Mon, 7 Nov 2016 22:50:58 +0530	[thread overview]
Message-ID: <CAGcde9EkEsvJ2kBpNvd+bEZj0nbpgmFu1zBe+RQz+Kij9WxHMA@mail.gmail.com> (raw)
In-Reply-To: <63750c2f-35cb-91ab-276b-c788f51081cb@osg.samsung.com>

Hi Javier,

On 7 November 2016 at 20:31, Javier Martinez Canillas
<javier@osg.samsung.com> wrote:
> Hello Pankaj,
>
> On 11/07/2016 07:09 AM, Pankaj Dubey wrote:
>> The MAX8997 PMIC has 32.786kHz crystal oscillator which provides an
>> accurate low frequency clock for MAX8997 internal circuit as well as
>> external circuit. This patch adds support for these two clocks.
>>
>> CC: Michael Turquette <mturquette@baylibre.com>
>> CC: Rob Herring <robh+dt@kernel.org>
>> CC: devicetree@vger.kernel.org
>> CC: linux-clk@vger.kernel.org
>> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
>> ---
>
> What kernel version are you basing this on? The Maxim common clock code

This patch series, I have prepared on Krzysztof's for-next which is 4.9-rc1,

> is going away for v4.9 and instead the clk-max77686 driver supports both
> 77686 and 77802 clocks. See commit 8ad313fe4e00 ("clk: max77686: Combine
> Maxim max77686 and max77802 driver").
>
> Since the 8997 clock IP looks very similar to 77802 AFAICT, you should
> also extend the clk-max77686 driver to have 8997 support.
>

I was not aware of this change. I will check this and if I can
reuse/extend max77686 for 8997 I will do it.

Thanks,
Pankaj Dubey

> Best regards,
> --
> Javier Martinez Canillas
> Open Source Group
> Samsung Research America
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: pankaj.dubey@samsung.com (Pankaj Dubey)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/6] clk: Add driver for Maxim-8997 PMIC clocks
Date: Mon, 7 Nov 2016 22:50:58 +0530	[thread overview]
Message-ID: <CAGcde9EkEsvJ2kBpNvd+bEZj0nbpgmFu1zBe+RQz+Kij9WxHMA@mail.gmail.com> (raw)
In-Reply-To: <63750c2f-35cb-91ab-276b-c788f51081cb@osg.samsung.com>

Hi Javier,

On 7 November 2016 at 20:31, Javier Martinez Canillas
<javier@osg.samsung.com> wrote:
> Hello Pankaj,
>
> On 11/07/2016 07:09 AM, Pankaj Dubey wrote:
>> The MAX8997 PMIC has 32.786kHz crystal oscillator which provides an
>> accurate low frequency clock for MAX8997 internal circuit as well as
>> external circuit. This patch adds support for these two clocks.
>>
>> CC: Michael Turquette <mturquette@baylibre.com>
>> CC: Rob Herring <robh+dt@kernel.org>
>> CC: devicetree at vger.kernel.org
>> CC: linux-clk at vger.kernel.org
>> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
>> ---
>
> What kernel version are you basing this on? The Maxim common clock code

This patch series, I have prepared on Krzysztof's for-next which is 4.9-rc1,

> is going away for v4.9 and instead the clk-max77686 driver supports both
> 77686 and 77802 clocks. See commit 8ad313fe4e00 ("clk: max77686: Combine
> Maxim max77686 and max77802 driver").
>
> Since the 8997 clock IP looks very similar to 77802 AFAICT, you should
> also extend the clk-max77686 driver to have 8997 support.
>

I was not aware of this change. I will check this and if I can
reuse/extend max77686 for 8997 I will do it.

Thanks,
Pankaj Dubey

> Best regards,
> --
> Javier Martinez Canillas
> Open Source Group
> Samsung Research America
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2016-11-07 17:20 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-07 10:09 [PATCH 0/6] Add support for MAX8997 Clock Driver Pankaj Dubey
2016-11-07 10:09 ` Pankaj Dubey
2016-11-07 10:09 ` [PATCH 1/6] mfd: max8997: Initialize max8997 register map Pankaj Dubey
2016-11-07 10:09   ` Pankaj Dubey
2016-11-07 14:22   ` Javier Martinez Canillas
2016-11-07 14:22     ` Javier Martinez Canillas
2016-11-07 17:12     ` Pankaj Dubey
2016-11-07 17:12       ` Pankaj Dubey
2016-11-07 10:09 ` [PATCH 5/6] mfd: max8997: Add max8997-clk name in mfd_cell Pankaj Dubey
2016-11-07 10:09   ` Pankaj Dubey
2016-11-07 15:08   ` Javier Martinez Canillas
2016-11-07 15:08     ` Javier Martinez Canillas
     [not found] ` <1478513376-14307-1-git-send-email-pankaj.dubey-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-11-07 10:09   ` [PATCH 2/6] dt-bindings: clk: max8997: Add DT binding documentation Pankaj Dubey
2016-11-07 10:09     ` Pankaj Dubey
2016-11-07 10:09     ` Pankaj Dubey
2016-11-07 14:47     ` Javier Martinez Canillas
2016-11-07 14:47       ` Javier Martinez Canillas
2016-11-14 16:15     ` Rob Herring
2016-11-14 16:15       ` Rob Herring
2016-11-17  2:17       ` pankaj.dubey
2016-11-17  2:17         ` pankaj.dubey
2016-11-07 10:09   ` [PATCH 3/6] clk: Add driver for Maxim-8997 PMIC clocks Pankaj Dubey
2016-11-07 10:09     ` Pankaj Dubey
2016-11-07 10:09     ` Pankaj Dubey
2016-11-07 15:01     ` Javier Martinez Canillas
2016-11-07 15:01       ` Javier Martinez Canillas
2016-11-07 15:01       ` Javier Martinez Canillas
     [not found]       ` <63750c2f-35cb-91ab-276b-c788f51081cb-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org>
2016-11-07 17:20         ` Pankaj Dubey [this message]
2016-11-07 17:20           ` Pankaj Dubey
2016-11-07 17:20           ` Pankaj Dubey
2016-11-07 17:41     ` Krzysztof Kozlowski
2016-11-07 17:41       ` Krzysztof Kozlowski
2016-11-07 10:09   ` [PATCH 4/6] ARM: dts: Add clock provider specific properties to max8997 node Pankaj Dubey
2016-11-07 10:09     ` Pankaj Dubey
     [not found]     ` <1478513376-14307-5-git-send-email-pankaj.dubey-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-11-07 15:07       ` Javier Martinez Canillas
2016-11-07 15:07         ` Javier Martinez Canillas
2016-11-07 10:09   ` [PATCH 6/6] ARM: dts: Extend the S3C RTC node with rtc_src clock Pankaj Dubey
2016-11-07 10:09     ` Pankaj Dubey
2016-11-07 15:09     ` Javier Martinez Canillas
2016-11-07 15:09       ` Javier Martinez Canillas
2016-11-07 17:44     ` Krzysztof Kozlowski
2016-11-07 17:44       ` Krzysztof Kozlowski
2016-11-07 17:27 ` [PATCH 0/6] Add support for MAX8997 Clock Driver Krzysztof Kozlowski
2016-11-07 17:27   ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAGcde9EkEsvJ2kBpNvd+bEZj0nbpgmFu1zBe+RQz+Kij9WxHMA@mail.gmail.com \
    --to=pankaj.dubey-sze3o3uu22jbdgjk7y7tuq@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=javier-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org \
    --cc=kgene-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
    --cc=myungjoo.ham-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=thomas.ab-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.