From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To: Icenowy Zheng <icenowy@aosc.io>
Cc: Chen-Yu Tsai <wens@csie.org>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Jonathan Cameron <jic23@kernel.org>,
"Lee Jones" <lee.jones@linaro.org>,
Quentin Schulz <quentin.schulz@free-electrons.com>,
<devicetree@vger.kernel.org>, <linux-pm@vger.kernel.org>,
<linux-iio@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-sunxi@googlegroups.com>,
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [RFC PATCH 0/7] AXP803 AC/Battery support
Date: Thu, 21 Sep 2017 15:46:21 +0100 [thread overview]
Message-ID: <20170921154621.0000328d@huawei.com> (raw)
In-Reply-To: <20170920151814.22461-1-icenowy@aosc.io>
On Wed, 20 Sep 2017 23:18:07 +0800
Icenowy Zheng <icenowy@aosc.io> wrote:
> The AXP803 PMIC, used by most Allwinner A64 boards, features 3 power inputs:
> AC, USB and Battery.
>
> This patchset adds support for the AC and Battery supplies, which is useful
> for the boards from Pine64 (Pine64, SoPine w/ baseboard model A, Pinebook).
>
> The USB supply is not yet supported in this patchset because it's not
> present on Pine series boards.
>
> In order to enable battery monitoring the ADC for battery is also enabled
> for AXs.
>
> In order to enable battery monitoring the ADC for battery is also enabled
> for AXP803.
I'll go with the obvious question...
Why an RFC rather than a standard patch submission? I'm not immediately
seeing what is controversial!
Jonathan
>
> Icenowy Zheng (7):
> dt-bindings: add compatibles for AXP803 Battery/USB power supplies
> iio: adc: axp20x-adc: allow to skip ADC rate setup now
> iio: adc: axp20x-adc: add support for AXP803
> power: supply: axp20x-battery: support AXP803
> mfd: axp20x: add cells for AXP803 ADC/AC Power/Battery
> arm64: allwinner: a64: add power supply nodes in AXP803 DTSI
> arm64: allwinner: a64: enable AC and Battery for Pine64
>
> .../bindings/power/supply/axp20x_battery.txt | 1 +
> .../bindings/power/supply/axp20x_usb_power.txt | 1 +
> arch/arm64/boot/dts/allwinner/axp803.dtsi | 15 +++
> .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 8 ++
> drivers/iio/adc/axp20x_adc.c | 114 ++++++++++++++++++++-
> drivers/mfd/axp20x.c | 11 ++
> drivers/power/supply/axp20x_battery.c | 88 ++++++++++++++--
> 7 files changed, 226 insertions(+), 12 deletions(-)
>
WARNING: multiple messages have this Message-ID
From: Jonathan Cameron <Jonathan.Cameron-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
To: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
Cc: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Jonathan Cameron <jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Quentin Schulz
<quentin.schulz-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [RFC PATCH 0/7] AXP803 AC/Battery support
Date: Thu, 21 Sep 2017 15:46:21 +0100 [thread overview]
Message-ID: <20170921154621.0000328d@huawei.com> (raw)
In-Reply-To: <20170920151814.22461-1-icenowy-h8G6r0blFSE@public.gmane.org>
On Wed, 20 Sep 2017 23:18:07 +0800
Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org> wrote:
> The AXP803 PMIC, used by most Allwinner A64 boards, features 3 power inputs:
> AC, USB and Battery.
>
> This patchset adds support for the AC and Battery supplies, which is useful
> for the boards from Pine64 (Pine64, SoPine w/ baseboard model A, Pinebook).
>
> The USB supply is not yet supported in this patchset because it's not
> present on Pine series boards.
>
> In order to enable battery monitoring the ADC for battery is also enabled
> for AXs.
>
> In order to enable battery monitoring the ADC for battery is also enabled
> for AXP803.
I'll go with the obvious question...
Why an RFC rather than a standard patch submission? I'm not immediately
seeing what is controversial!
Jonathan
>
> Icenowy Zheng (7):
> dt-bindings: add compatibles for AXP803 Battery/USB power supplies
> iio: adc: axp20x-adc: allow to skip ADC rate setup now
> iio: adc: axp20x-adc: add support for AXP803
> power: supply: axp20x-battery: support AXP803
> mfd: axp20x: add cells for AXP803 ADC/AC Power/Battery
> arm64: allwinner: a64: add power supply nodes in AXP803 DTSI
> arm64: allwinner: a64: enable AC and Battery for Pine64
>
> .../bindings/power/supply/axp20x_battery.txt | 1 +
> .../bindings/power/supply/axp20x_usb_power.txt | 1 +
> arch/arm64/boot/dts/allwinner/axp803.dtsi | 15 +++
> .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 8 ++
> drivers/iio/adc/axp20x_adc.c | 114 ++++++++++++++++++++-
> drivers/mfd/axp20x.c | 11 ++
> drivers/power/supply/axp20x_battery.c | 88 ++++++++++++++--
> 7 files changed, 226 insertions(+), 12 deletions(-)
>
WARNING: multiple messages have this Message-ID
From: Jonathan.Cameron@huawei.com (Jonathan Cameron)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 0/7] AXP803 AC/Battery support
Date: Thu, 21 Sep 2017 15:46:21 +0100 [thread overview]
Message-ID: <20170921154621.0000328d@huawei.com> (raw)
In-Reply-To: <20170920151814.22461-1-icenowy@aosc.io>
On Wed, 20 Sep 2017 23:18:07 +0800
Icenowy Zheng <icenowy@aosc.io> wrote:
> The AXP803 PMIC, used by most Allwinner A64 boards, features 3 power inputs:
> AC, USB and Battery.
>
> This patchset adds support for the AC and Battery supplies, which is useful
> for the boards from Pine64 (Pine64, SoPine w/ baseboard model A, Pinebook).
>
> The USB supply is not yet supported in this patchset because it's not
> present on Pine series boards.
>
> In order to enable battery monitoring the ADC for battery is also enabled
> for AXs.
>
> In order to enable battery monitoring the ADC for battery is also enabled
> for AXP803.
I'll go with the obvious question...
Why an RFC rather than a standard patch submission? I'm not immediately
seeing what is controversial!
Jonathan
>
> Icenowy Zheng (7):
> dt-bindings: add compatibles for AXP803 Battery/USB power supplies
> iio: adc: axp20x-adc: allow to skip ADC rate setup now
> iio: adc: axp20x-adc: add support for AXP803
> power: supply: axp20x-battery: support AXP803
> mfd: axp20x: add cells for AXP803 ADC/AC Power/Battery
> arm64: allwinner: a64: add power supply nodes in AXP803 DTSI
> arm64: allwinner: a64: enable AC and Battery for Pine64
>
> .../bindings/power/supply/axp20x_battery.txt | 1 +
> .../bindings/power/supply/axp20x_usb_power.txt | 1 +
> arch/arm64/boot/dts/allwinner/axp803.dtsi | 15 +++
> .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 8 ++
> drivers/iio/adc/axp20x_adc.c | 114 ++++++++++++++++++++-
> drivers/mfd/axp20x.c | 11 ++
> drivers/power/supply/axp20x_battery.c | 88 ++++++++++++++--
> 7 files changed, 226 insertions(+), 12 deletions(-)
>
next prev parent reply other threads:[~2017-09-21 14:46 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-20 15:18 Icenowy Zheng
2017-09-20 15:18 ` Icenowy Zheng
2017-09-20 15:18 ` Icenowy Zheng
2017-09-20 15:18 ` [RFC PATCH 1/7] dt-bindings: add compatibles for AXP803 Battery/USB power supplies Icenowy Zheng
2017-09-20 15:18 ` Icenowy Zheng
2017-09-20 15:18 ` Icenowy Zheng
2017-09-25 9:14 ` Quentin Schulz
2017-09-25 9:14 ` Quentin Schulz
2017-09-25 9:14 ` Quentin Schulz
2017-09-20 15:18 ` [RFC PATCH 2/7] iio: adc: axp20x-adc: allow to skip ADC rate setup now Icenowy Zheng
2017-09-20 15:18 ` Icenowy Zheng
2017-09-20 15:18 ` Icenowy Zheng
2017-09-25 7:20 ` Quentin Schulz
2017-09-25 7:20 ` Quentin Schulz
2017-09-20 15:18 ` [RFC PATCH 3/7] iio: adc: axp20x-adc: add support for AXP803 Icenowy Zheng
2017-09-20 15:18 ` Icenowy Zheng
2017-09-20 15:18 ` Icenowy Zheng
2017-09-24 14:32 ` Jonathan Cameron
2017-09-24 14:32 ` Jonathan Cameron
2017-09-24 14:32 ` Jonathan Cameron
2017-09-25 8:48 ` Quentin Schulz
2017-09-25 8:48 ` Quentin Schulz
2017-09-25 8:48 ` Quentin Schulz
2017-09-20 15:18 ` [RFC PATCH 4/7] power: supply: axp20x-battery: support AXP803 Icenowy Zheng
2017-09-20 15:18 ` Icenowy Zheng
2017-09-24 14:34 ` Jonathan Cameron
2017-09-24 14:34 ` Jonathan Cameron
2017-09-24 14:34 ` Jonathan Cameron
2017-09-25 8:58 ` Quentin Schulz
2017-09-25 8:58 ` Quentin Schulz
2017-09-25 8:58 ` Quentin Schulz
2017-09-20 15:18 ` [RFC PATCH 5/7] mfd: axp20x: add cells for AXP803 ADC/AC Power/Battery Icenowy Zheng
2017-09-20 15:18 ` Icenowy Zheng
2017-09-20 15:18 ` Icenowy Zheng
2017-09-20 15:18 ` [RFC PATCH 6/7] arm64: allwinner: a64: add power supply nodes in AXP803 DTSI Icenowy Zheng
2017-09-20 15:18 ` Icenowy Zheng
2017-09-20 15:18 ` Icenowy Zheng
2017-09-25 9:11 ` Quentin Schulz
2017-09-25 9:11 ` Quentin Schulz
2017-09-25 9:11 ` Quentin Schulz
2017-09-25 9:14 ` Icenowy Zheng
2017-09-25 9:14 ` Icenowy Zheng
2017-09-25 9:14 ` Icenowy Zheng
2017-09-25 9:19 ` [linux-sunxi] " Chen-Yu Tsai
2017-09-25 9:19 ` Chen-Yu Tsai
2017-09-25 9:19 ` Chen-Yu Tsai
2017-09-25 9:19 ` Chen-Yu Tsai
2017-09-25 9:24 ` Quentin Schulz
2017-09-25 9:24 ` Quentin Schulz
2017-09-25 9:24 ` Quentin Schulz
2017-09-20 15:18 ` [RFC PATCH 7/7] arm64: allwinner: a64: enable AC and Battery for Pine64 Icenowy Zheng
2017-09-20 15:18 ` Icenowy Zheng
2017-09-20 15:18 ` Icenowy Zheng
2017-09-21 14:46 ` Jonathan Cameron [this message]
2017-09-21 14:46 ` [RFC PATCH 0/7] AXP803 AC/Battery support Jonathan Cameron
2017-09-21 14:46 ` Jonathan Cameron
2017-09-21 15:20 ` Icenowy Zheng
2017-09-21 15:20 ` Icenowy Zheng
2017-09-21 15:20 ` Icenowy Zheng
2017-09-24 14:36 ` Jonathan Cameron
2017-09-24 14:36 ` Jonathan Cameron
2017-09-25 9:22 ` Quentin Schulz
2017-09-25 9:22 ` Quentin Schulz
2017-09-25 9:22 ` Quentin Schulz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170921154621.0000328d@huawei.com \
--to=jonathan.cameron@huawei.com \
--cc=devicetree@vger.kernel.org \
--cc=icenowy@aosc.io \
--cc=jic23@kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@free-electrons.com \
--cc=quentin.schulz@free-electrons.com \
--cc=wens@csie.org \
--subject='Re: [RFC PATCH 0/7] AXP803 AC/Battery support' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.