From: Paul Walmsley <paul.walmsley@sifive.com>
To: linux-kernel@vger.kernel.org, linux-riscv@lists.infradead.org
Cc: Paul Walmsley <paul@pwsan.com>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Palmer Dabbelt <palmer@sifive.com>,
Albert Ou <aou@eecs.berkeley.edu>,
ShihPo Hung <shihpo.hung@sifive.com>,
devicetree@vger.kernel.org
Subject: [PATCH v3 4/5] riscv: dts: add initial support for the SiFive FU540-C000 SoC
Date: Sun, 2 Jun 2019 01:04:59 -0700 [thread overview]
Message-ID: <20190602080500.31700-5-paul.walmsley@sifive.com> (raw)
In-Reply-To: <20190602080500.31700-1-paul.walmsley@sifive.com>
Add initial support for the SiFive FU540-C000 SoC. This is a 28nm SoC
based around the SiFive U54-MC core complex and a TileLink
interconnect.
This file is expected to grow as more device drivers are added to the
kernel.
This patch includes a fix to the QSPI memory map due to a
documentation bug, found by ShihPo Hung <shihpo.hung@sifive.com>, adds
entries for the I2C controller, and merges all DT changes that
formerly were made dynamically by the riscv-pk BBL proxy kernel.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: ShihPo Hung <shihpo.hung@sifive.com>
Cc: devicetree@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 215 +++++++++++++++++++++
1 file changed, 215 insertions(+)
create mode 100644 arch/riscv/boot/dts/sifive/fu540-c000.dtsi
diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
new file mode 100644
index 000000000000..3c06ee4b2b29
--- /dev/null
+++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2018-2019 SiFive, Inc */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/sifive-fu540-prci.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "sifive,fu540-c000", "sifive,fu540";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ timebase-frequency = <1000000>;
+ cpu0: cpu@0 {
+ compatible = "sifive,e51", "sifive,rocket0", "riscv";
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <128>;
+ i-cache-size = <16384>;
+ reg = <0>;
+ riscv,isa = "rv64imac";
+ status = "disabled";
+ cpu0_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ cpu1: cpu@1 {
+ compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <1>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ cpu1_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ cpu2: cpu@2 {
+ clock-frequency = <0>;
+ compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <2>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ cpu2_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ cpu3: cpu@3 {
+ clock-frequency = <0>;
+ compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <3>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ cpu3_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ cpu4: cpu@4 {
+ clock-frequency = <0>;
+ compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <4>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ cpu4_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ };
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "sifive,fu540-c000", "sifive,fu540", "simple-bus";
+ ranges;
+ plic0: interrupt-controller@c000000 {
+ #interrupt-cells = <1>;
+ compatible = "sifive,plic-1.0.0";
+ reg = <0x0 0xc000000 0x0 0x4000000>;
+ riscv,ndev = <53>;
+ interrupt-controller;
+ interrupts-extended = <
+ &cpu0_intc 0xffffffff
+ &cpu1_intc 0xffffffff &cpu1_intc 9
+ &cpu2_intc 0xffffffff &cpu2_intc 9
+ &cpu3_intc 0xffffffff &cpu3_intc 9
+ &cpu4_intc 0xffffffff &cpu4_intc 9>;
+ };
+ prci: clock-controller@10000000 {
+ compatible = "sifive,fu540-c000-prci";
+ reg = <0x0 0x10000000 0x0 0x1000>;
+ clocks = <&hfclk>, <&rtcclk>;
+ #clock-cells = <1>;
+ };
+ uart0: serial@10010000 {
+ compatible = "sifive,fu540-c000-uart", "sifive,uart0";
+ reg = <0x0 0x10010000 0x0 0x1000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <4>;
+ clocks = <&prci PRCI_CLK_TLCLK>;
+ };
+ uart1: serial@10011000 {
+ compatible = "sifive,fu540-c000-uart", "sifive,uart0";
+ reg = <0x0 0x10011000 0x0 0x1000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <5>;
+ clocks = <&prci PRCI_CLK_TLCLK>;
+ };
+ i2c0: i2c@10030000 {
+ compatible = "sifive,fu540-c000-i2c", "sifive,i2c0";
+ reg = <0x0 0x10030000 0x0 0x1000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <50>;
+ clocks = <&prci PRCI_CLK_TLCLK>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ qspi0: spi@10040000 {
+ compatible = "sifive,fu540-c000-spi", "sifive,spi0";
+ reg = <0x0 0x10040000 0x0 0x1000
+ 0x0 0x20000000 0x0 0x10000000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <51>;
+ clocks = <&prci PRCI_CLK_TLCLK>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ qspi1: spi@10041000 {
+ compatible = "sifive,fu540-c000-spi", "sifive,spi0";
+ reg = <0x0 0x10041000 0x0 0x1000
+ 0x0 0x30000000 0x0 0x10000000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <52>;
+ clocks = <&prci PRCI_CLK_TLCLK>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ qspi2: spi@10050000 {
+ compatible = "sifive,fu540-c000-spi", "sifive,spi0";
+ reg = <0x0 0x10050000 0x0 0x1000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <6>;
+ clocks = <&prci PRCI_CLK_TLCLK>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
--
2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Paul Walmsley <paul.walmsley@sifive.com>
To: linux-kernel@vger.kernel.org, linux-riscv@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, Paul Walmsley <paul@pwsan.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Palmer Dabbelt <palmer@sifive.com>,
Rob Herring <robh+dt@kernel.org>,
ShihPo Hung <shihpo.hung@sifive.com>
Subject: [PATCH v3 4/5] riscv: dts: add initial support for the SiFive FU540-C000 SoC
Date: Sun, 2 Jun 2019 01:04:59 -0700 [thread overview]
Message-ID: <20190602080500.31700-5-paul.walmsley@sifive.com> (raw)
In-Reply-To: <20190602080500.31700-1-paul.walmsley@sifive.com>
Add initial support for the SiFive FU540-C000 SoC. This is a 28nm SoC
based around the SiFive U54-MC core complex and a TileLink
interconnect.
This file is expected to grow as more device drivers are added to the
kernel.
This patch includes a fix to the QSPI memory map due to a
documentation bug, found by ShihPo Hung <shihpo.hung@sifive.com>, adds
entries for the I2C controller, and merges all DT changes that
formerly were made dynamically by the riscv-pk BBL proxy kernel.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: ShihPo Hung <shihpo.hung@sifive.com>
Cc: devicetree@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 215 +++++++++++++++++++++
1 file changed, 215 insertions(+)
create mode 100644 arch/riscv/boot/dts/sifive/fu540-c000.dtsi
diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
new file mode 100644
index 000000000000..3c06ee4b2b29
--- /dev/null
+++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2018-2019 SiFive, Inc */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/sifive-fu540-prci.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "sifive,fu540-c000", "sifive,fu540";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ timebase-frequency = <1000000>;
+ cpu0: cpu@0 {
+ compatible = "sifive,e51", "sifive,rocket0", "riscv";
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <128>;
+ i-cache-size = <16384>;
+ reg = <0>;
+ riscv,isa = "rv64imac";
+ status = "disabled";
+ cpu0_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ cpu1: cpu@1 {
+ compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <1>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ cpu1_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ cpu2: cpu@2 {
+ clock-frequency = <0>;
+ compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <2>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ cpu2_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ cpu3: cpu@3 {
+ clock-frequency = <0>;
+ compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <3>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ cpu3_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ cpu4: cpu@4 {
+ clock-frequency = <0>;
+ compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <4>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ cpu4_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ };
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "sifive,fu540-c000", "sifive,fu540", "simple-bus";
+ ranges;
+ plic0: interrupt-controller@c000000 {
+ #interrupt-cells = <1>;
+ compatible = "sifive,plic-1.0.0";
+ reg = <0x0 0xc000000 0x0 0x4000000>;
+ riscv,ndev = <53>;
+ interrupt-controller;
+ interrupts-extended = <
+ &cpu0_intc 0xffffffff
+ &cpu1_intc 0xffffffff &cpu1_intc 9
+ &cpu2_intc 0xffffffff &cpu2_intc 9
+ &cpu3_intc 0xffffffff &cpu3_intc 9
+ &cpu4_intc 0xffffffff &cpu4_intc 9>;
+ };
+ prci: clock-controller@10000000 {
+ compatible = "sifive,fu540-c000-prci";
+ reg = <0x0 0x10000000 0x0 0x1000>;
+ clocks = <&hfclk>, <&rtcclk>;
+ #clock-cells = <1>;
+ };
+ uart0: serial@10010000 {
+ compatible = "sifive,fu540-c000-uart", "sifive,uart0";
+ reg = <0x0 0x10010000 0x0 0x1000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <4>;
+ clocks = <&prci PRCI_CLK_TLCLK>;
+ };
+ uart1: serial@10011000 {
+ compatible = "sifive,fu540-c000-uart", "sifive,uart0";
+ reg = <0x0 0x10011000 0x0 0x1000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <5>;
+ clocks = <&prci PRCI_CLK_TLCLK>;
+ };
+ i2c0: i2c@10030000 {
+ compatible = "sifive,fu540-c000-i2c", "sifive,i2c0";
+ reg = <0x0 0x10030000 0x0 0x1000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <50>;
+ clocks = <&prci PRCI_CLK_TLCLK>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ qspi0: spi@10040000 {
+ compatible = "sifive,fu540-c000-spi", "sifive,spi0";
+ reg = <0x0 0x10040000 0x0 0x1000
+ 0x0 0x20000000 0x0 0x10000000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <51>;
+ clocks = <&prci PRCI_CLK_TLCLK>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ qspi1: spi@10041000 {
+ compatible = "sifive,fu540-c000-spi", "sifive,spi0";
+ reg = <0x0 0x10041000 0x0 0x1000
+ 0x0 0x30000000 0x0 0x10000000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <52>;
+ clocks = <&prci PRCI_CLK_TLCLK>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ qspi2: spi@10050000 {
+ compatible = "sifive,fu540-c000-spi", "sifive,spi0";
+ reg = <0x0 0x10050000 0x0 0x1000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <6>;
+ clocks = <&prci PRCI_CLK_TLCLK>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
--
2.20.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2019-06-02 8:05 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-02 8:04 [PATCH v3 0/5] arch: riscv: add board and SoC DT file support Paul Walmsley
2019-06-02 8:04 ` Paul Walmsley
2019-06-02 8:04 ` [PATCH v3 1/5] arch: riscv: add support for building DTB files from DT source data Paul Walmsley
2019-06-02 8:04 ` Paul Walmsley
2019-06-04 14:37 ` Loys Ollivier
2019-06-04 14:37 ` Loys Ollivier
2019-06-07 5:12 ` Paul Walmsley
2019-06-07 5:12 ` Paul Walmsley
2019-06-07 9:49 ` Loys Ollivier
2019-06-07 9:49 ` Loys Ollivier
2019-06-08 17:56 ` Palmer Dabbelt
2019-06-08 17:56 ` Palmer Dabbelt
2019-06-09 5:50 ` Paul Walmsley
2019-06-09 5:50 ` Paul Walmsley
2019-06-09 7:49 ` Christoph Hellwig
2019-06-09 7:49 ` Christoph Hellwig
2019-06-02 8:04 ` [PATCH v3 2/5] dt-bindings: riscv: sifive: add YAML documentation for the SiFive FU540 Paul Walmsley
2019-06-02 8:04 ` Paul Walmsley
2019-06-10 21:44 ` Rob Herring
2019-06-10 21:44 ` Rob Herring
2019-06-16 18:39 ` Paul Walmsley
2019-06-16 18:39 ` Paul Walmsley
2019-06-02 8:04 ` [PATCH v3 3/5] dt-bindings: riscv: convert cpu binding to json-schema Paul Walmsley
2019-06-02 8:04 ` Paul Walmsley
2019-06-02 8:04 ` Paul Walmsley
2019-06-02 8:04 ` Paul Walmsley [this message]
2019-06-02 8:04 ` [PATCH v3 4/5] riscv: dts: add initial support for the SiFive FU540-C000 SoC Paul Walmsley
2019-06-04 14:38 ` Loys Ollivier
2019-06-04 14:38 ` Loys Ollivier
2019-06-02 8:05 ` [PATCH v3 5/5] riscv: dts: add initial board data for the SiFive HiFive Unleashed Paul Walmsley
2019-06-02 8:05 ` Paul Walmsley
2019-06-04 14:41 ` Loys Ollivier
2019-06-04 14:41 ` Loys Ollivier
2019-06-09 6:18 ` Antony Pavlov
2019-06-09 6:18 ` Antony Pavlov
2019-06-09 6:18 ` Antony Pavlov
2019-06-16 18:36 ` Paul Walmsley
2019-06-16 18:36 ` Paul Walmsley
2019-06-16 18:36 ` Paul Walmsley
2019-06-04 14:31 ` [PATCH v3 0/5] arch: riscv: add board and SoC DT file support Loys Ollivier
2019-06-04 14:31 ` Loys Ollivier
2019-06-07 5:14 ` Paul Walmsley
2019-06-07 5:14 ` Paul Walmsley
2019-06-05 17:36 ` Kevin Hilman
2019-06-05 17:36 ` Kevin Hilman
2019-06-06 23:15 ` Atish Patra
2019-06-06 23:15 ` Atish Patra
2019-06-07 16:51 ` Kevin Hilman
2019-06-07 16:51 ` Kevin Hilman
2019-06-07 17:58 ` Atish Patra
2019-06-07 17:58 ` Atish Patra
2019-06-07 20:55 ` Auer, Lukas
2019-06-07 20:55 ` Auer, Lukas
2019-06-07 5:18 ` Paul Walmsley
2019-06-07 5:18 ` Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190602080500.31700-5-paul.walmsley@sifive.com \
--to=paul.walmsley@sifive.com \
--cc=aou@eecs.berkeley.edu \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=palmer@sifive.com \
--cc=paul@pwsan.com \
--cc=robh+dt@kernel.org \
--cc=shihpo.hung@sifive.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.