From: Roman Bolshakov <r.bolshakov@yadro.com>
To: linux-scsi@vger.kernel.org, target-devel@vger.kernel.org
Cc: linux@yadro.com, Roman Bolshakov <r.bolshakov@yadro.com>,
Quinn Tran <qutran@marvell.com>,
Himanshu Madhani <hmadhani@marvell.com>
Subject: [PATCH v2 11/15] scsi: qla2xxx: Ignore PORT UPDATE after N2N PLOGI
Date: Wed, 20 Nov 2019 22:27:19 +0000 [thread overview]
Message-ID: <20191120222723.27779-12-r.bolshakov@yadro.com> (raw)
In-Reply-To: <20191120222723.27779-1-r.bolshakov@yadro.com>
PORT UPDATE asynchronous event is generated on the host that issues PLOGI
ELS (in the case of higher WWPN). In that case, the event shouldn't be
handled as it sets unwanted DPC flags (i.e. LOOP_RESYNC_NEEDED) that
trigger link flap.
Ignore the event if the host has higher WWPN, but handle otherwise.
Cc: Quinn Tran <qutran@marvell.com>
Cc: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
---
drivers/scsi/qla2xxx/qla_mbx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 4eb88c3ee08e..bb6811b94683 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -3920,6 +3920,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
vha->d_id.b24 = 0;
vha->d_id.b.al_pa = 1;
ha->flags.n2n_bigger = 1;
+ ha->flags.n2n_ae = 0;
id.b.al_pa = 2;
ql_dbg(ql_dbg_async, vha, 0x5075,
@@ -3930,6 +3931,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
"Format 1: Remote login - Waiting for WWPN %8phC.\n",
rptid_entry->u.f1.port_name);
ha->flags.n2n_bigger = 0;
+ ha->flags.n2n_ae = 1;
}
qla24xx_post_newsess_work(vha, &id,
rptid_entry->u.f1.port_name,
@@ -3941,7 +3943,6 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
/* if our portname is higher then initiate N2N login */
set_bit(N2N_LOGIN_NEEDED, &vha->dpc_flags);
- ha->flags.n2n_ae = 1;
return;
break;
case TOPO_FL:
--
2.24.0
WARNING: multiple messages have this Message-ID (diff)
From: Roman Bolshakov <r.bolshakov@yadro.com>
To: <linux-scsi@vger.kernel.org>, <target-devel@vger.kernel.org>
Cc: <linux@yadro.com>, Roman Bolshakov <r.bolshakov@yadro.com>,
Quinn Tran <qutran@marvell.com>,
Himanshu Madhani <hmadhani@marvell.com>
Subject: [PATCH v2 11/15] scsi: qla2xxx: Ignore PORT UPDATE after N2N PLOGI
Date: Thu, 21 Nov 2019 01:27:19 +0300 [thread overview]
Message-ID: <20191120222723.27779-12-r.bolshakov@yadro.com> (raw)
In-Reply-To: <20191120222723.27779-1-r.bolshakov@yadro.com>
PORT UPDATE asynchronous event is generated on the host that issues PLOGI
ELS (in the case of higher WWPN). In that case, the event shouldn't be
handled as it sets unwanted DPC flags (i.e. LOOP_RESYNC_NEEDED) that
trigger link flap.
Ignore the event if the host has higher WWPN, but handle otherwise.
Cc: Quinn Tran <qutran@marvell.com>
Cc: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
---
drivers/scsi/qla2xxx/qla_mbx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 4eb88c3ee08e..bb6811b94683 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -3920,6 +3920,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
vha->d_id.b24 = 0;
vha->d_id.b.al_pa = 1;
ha->flags.n2n_bigger = 1;
+ ha->flags.n2n_ae = 0;
id.b.al_pa = 2;
ql_dbg(ql_dbg_async, vha, 0x5075,
@@ -3930,6 +3931,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
"Format 1: Remote login - Waiting for WWPN %8phC.\n",
rptid_entry->u.f1.port_name);
ha->flags.n2n_bigger = 0;
+ ha->flags.n2n_ae = 1;
}
qla24xx_post_newsess_work(vha, &id,
rptid_entry->u.f1.port_name,
@@ -3941,7 +3943,6 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
/* if our portname is higher then initiate N2N login */
set_bit(N2N_LOGIN_NEEDED, &vha->dpc_flags);
- ha->flags.n2n_ae = 1;
return;
break;
case TOPO_FL:
--
2.24.0
next prev parent reply other threads:[~2019-11-20 22:27 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-20 22:27 [PATCH v2 00/15] scsi: qla2xxx: Bug fixes Roman Bolshakov
2019-11-20 22:27 ` Roman Bolshakov
2019-11-20 22:27 ` [PATCH v2 01/15] scsi: qla2xxx: Ignore NULL pointer in tcm_qla2xxx_free_mcmd Roman Bolshakov
2019-11-20 22:27 ` Roman Bolshakov
2019-11-20 22:27 ` [PATCH v2 02/15] scsi: qla2xxx: Initialize free_work before flushing it Roman Bolshakov
2019-11-20 22:27 ` Roman Bolshakov
2019-11-20 22:27 ` [PATCH v2 03/15] scsi: qla2xxx: Drop superfluous INIT_WORK of del_work Roman Bolshakov
2019-11-20 22:27 ` Roman Bolshakov
2019-11-20 22:27 ` [PATCH v2 04/15] scsi: qla2xxx: Change discovery state before PLOGI Roman Bolshakov
2019-11-20 22:27 ` Roman Bolshakov
2019-11-20 22:27 ` [PATCH v2 05/15] scsi: qla2xxx: Allow PLOGI in target mode Roman Bolshakov
2019-11-20 22:27 ` Roman Bolshakov
2019-11-20 22:52 ` [EXT] " Quinn Tran
2019-11-21 16:38 ` Himanshu Madhani
2019-11-21 16:38 ` Himanshu Madhani
2019-11-20 22:27 ` [PATCH v2 06/15] scsi: qla2xxx: Don't call qlt_async_event twice Roman Bolshakov
2019-11-20 22:27 ` Roman Bolshakov
2019-11-21 15:43 ` Himanshu Madhani
2019-11-21 15:43 ` Himanshu Madhani
2019-11-20 22:27 ` [PATCH v2 07/15] scsi: qla2xxx: Fix PLOGI payload and ELS IOCB dump length Roman Bolshakov
2019-11-20 22:27 ` Roman Bolshakov
2019-11-21 16:39 ` [EXT] " Himanshu Madhani
2019-11-21 16:39 ` Himanshu Madhani
2019-11-20 22:27 ` [PATCH v2 08/15] scsi: qla2xxx: Configure local loop for N2N target Roman Bolshakov
2019-11-20 22:27 ` Roman Bolshakov
2019-11-20 23:06 ` [EXT] " Quinn Tran
2019-11-21 16:39 ` Himanshu Madhani
2019-11-21 16:39 ` Himanshu Madhani
2019-11-20 22:27 ` [PATCH v2 09/15] scsi: qla2xxx: Send Notify ACK after N2N PLOGI Roman Bolshakov
2019-11-20 22:27 ` Roman Bolshakov
2019-11-20 23:53 ` [EXT] " Quinn Tran
2019-11-21 16:40 ` Himanshu Madhani
2019-11-21 16:40 ` Himanshu Madhani
2019-11-20 22:27 ` [PATCH v2 10/15] scsi: qla2xxx: Don't defer relogin unconditonally Roman Bolshakov
2019-11-20 22:27 ` Roman Bolshakov
2019-11-21 0:03 ` [EXT] " Quinn Tran
2019-11-20 22:27 ` Roman Bolshakov [this message]
2019-11-20 22:27 ` [PATCH v2 11/15] scsi: qla2xxx: Ignore PORT UPDATE after N2N PLOGI Roman Bolshakov
2019-11-20 22:27 ` [PATCH v2 12/15] scsi: qla2xxx: Use explicit LOGO in target mode Roman Bolshakov
2019-11-20 22:27 ` Roman Bolshakov
2019-11-23 4:58 ` kbuild test robot
2019-11-23 4:58 ` kbuild test robot
2019-11-23 4:58 ` kbuild test robot
2019-11-20 22:27 ` [PATCH v2 13/15] scsi: qla2xxx: Add async mode for qla24xx_els_dcmd_iocb Roman Bolshakov
2019-11-20 22:27 ` Roman Bolshakov
2019-11-21 22:50 ` [EXT] " Quinn Tran
2019-11-22 5:04 ` Mark Harvey
2019-11-22 5:04 ` Mark Harvey
2019-11-22 17:00 ` Quinn Tran
2019-11-22 17:00 ` Quinn Tran
2019-11-24 19:15 ` Roman Bolshakov
2019-11-24 19:15 ` Roman Bolshakov
2019-11-20 22:27 ` [PATCH v2 14/15] scsi: qla2xxx: Add debug dump of LOGO payload and ELS IOCB Roman Bolshakov
2019-11-20 22:27 ` Roman Bolshakov
2019-11-21 16:37 ` Himanshu Madhani
2019-11-21 16:37 ` Himanshu Madhani
2019-11-21 22:52 ` [EXT] " Quinn Tran
2019-11-20 22:27 ` [PATCH v2 15/15] scsi: qla2xxx: Handle ABTS according to FCP spec for logged out ports Roman Bolshakov
2019-11-20 22:27 ` Roman Bolshakov
2019-11-23 5:57 ` kbuild test robot
2019-11-23 5:57 ` kbuild test robot
2019-11-23 5:57 ` kbuild test robot
2019-11-22 9:14 ` [PATCH v2 00/15] scsi: qla2xxx: Bug fixes Hannes Reinecke
2019-11-22 9:14 ` Hannes Reinecke
2019-11-22 21:36 ` Martin Wilck
2019-11-22 21:36 ` Martin Wilck
2019-11-24 18:31 ` Roman Bolshakov
2019-11-24 18:31 ` Roman Bolshakov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191120222723.27779-12-r.bolshakov@yadro.com \
--to=r.bolshakov@yadro.com \
--cc=hmadhani@marvell.com \
--cc=linux-scsi@vger.kernel.org \
--cc=linux@yadro.com \
--cc=qutran@marvell.com \
--cc=target-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.