From: Pratyush Yadav <p.yadav@ti.com> To: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Cc: Maxime Ripard <mripard@kernel.org>, Mauro Carvalho Chehab <mchehab@kernel.org>, Rob Herring <robh+dt@kernel.org>, Kishon Vijay Abraham I <kishon@ti.com>, Vinod Koul <vkoul@kernel.org>, Peter Ujfalusi <peter.ujfalusi@gmail.com>, Steve Longerbeam <slongerbeam@gmail.com>, Benoit Parrot <bparrot@ti.com>, <linux-media@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-phy@lists.infradead.org>, <dmaengine@vger.kernel.org>, Vignesh Raghavendra <vigneshr@ti.com>, Chunfeng Yun <chunfeng.yun@mediatek.com>, Laurent Pinchart <laurent.pinchart@ideasonboard.com> Subject: Re: [PATCH v2 00/18] CSI2RX support on J721E Date: Thu, 3 Jun 2021 18:22:53 +0530 [thread overview] Message-ID: <20210603125251.nmzibyvfzkkxfbtj@ti.com> (raw) In-Reply-To: <83bcd60a-2a45-59b2-8ebe-26ad5d828965@ideasonboard.com> On 27/05/21 04:23PM, Tomi Valkeinen wrote: > Hi Pratyush, > > On 26/05/2021 18:22, Pratyush Yadav wrote: > > Hi, > > > > This series adds support for CSI2 capture on J721E. It includes some > > fixes to the Cadence CSI2RX driver, adds Rx support to Cadence DPHY > > driver, and finally adds the TI CSI2RX wrapper driver. > > > > Tested on TI's J721E with OV5640 sensor. > > I also see this after a few captures: Can you share the application/command you are using to test? I used yavta to test and didn't see any problems after leaving the stream on for around 10 minutes. > > [ 84.115503] ------------[ cut here ]------------ > [ 84.120144] DMA-API: ti-udma 31150000.dma-controller: mapping sg segment longer than device claims to support [len=1900544] [max=65536] > [ 84.132376] WARNING: CPU: 1 PID: 594 at kernel/dma/debug.c:1172 debug_dma_map_sg+0x304/0x390 > [ 84.140804] Modules linked in: ov5640 ti_cal j721e_csi2rx cdns_csi2rx cdns_dphy v4l2_fwnode tidss ti_tfp410 tc358767 display_connector cdns_mhdp8546 panel_simple drm_kms_helper d > rm drm_panel_orientation_quirks cfbfillrect cfbimgblt cfbcopyarea phy_j721e_wiz phy_cadence_torrent > [ 84.165298] CPU: 1 PID: 594 Comm: cam-mplex.py Not tainted 5.13.0-rc1-00206-g98bb91e95a28-dirty #5 > [ 84.174236] Hardware name: Texas Instruments K3 J721E SoC (DT) > [ 84.180051] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) > [ 84.186041] pc : debug_dma_map_sg+0x304/0x390 > [ 84.190383] lr : debug_dma_map_sg+0x304/0x390 > [ 84.194725] sp : ffff800014d0f730 > [ 84.198026] x29: ffff800014d0f730 x28: ffff000801544680 x27: ffffffffffffffff > [ 84.205148] x26: 0000000000000000 x25: 0000000000000002 x24: 0000000000000001 > [ 84.212269] x23: ffff80001163abe0 x22: 0000000000000000 x21: 0000000000000001 > [ 84.219390] x20: ffff000801fa3010 x19: ffff0008075c7580 x18: 0000000000000000 > [ 84.226510] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000030 > [ 84.233630] x14: 6e61687420726567 x13: 6e6f6c20746e656d x12: 7420736d69616c63 > [ 84.240751] x11: 2065636976656420 x10: ffff8000116b18f8 x9 : ffff8000100eb920 > [ 84.247871] x8 : ffff8000116598f8 x7 : ffff8000116b18f8 x6 : 0000000000000001 > [ 84.254991] x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000000000 > [ 84.262111] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0008066f8000 > [ 84.269230] Call trace: > [ 84.271665] debug_dma_map_sg+0x304/0x390 > [ 84.275660] dma_map_sg_attrs+0x70/0xb0 > [ 84.279486] drm_gem_map_dma_buf+0x6c/0xf0 [drm] > [ 84.284177] __map_dma_buf+0x28/0x80 > [ 84.287742] dma_buf_map_attachment+0xe4/0x200 > [ 84.292172] vb2_dc_map_dmabuf+0x3c/0x150 > [ 84.296171] __prepare_dmabuf+0x1dc/0x514 > [ 84.300168] __buf_prepare+0x1a0/0x25c > [ 84.303903] vb2_core_qbuf+0x3d4/0x72c > [ 84.307638] vb2_qbuf+0x9c/0xf4 > [ 84.310767] vb2_ioctl_qbuf+0x68/0x7c > [ 84.314416] v4l_qbuf+0x54/0x70 > [ 84.317545] __video_do_ioctl+0x194/0x400 > [ 84.321541] video_usercopy+0x19c/0x910 > [ 84.325362] video_ioctl2+0x24/0x40 > [ 84.328837] v4l2_ioctl+0x4c/0x70 > [ 84.332141] __arm64_sys_ioctl+0xb4/0xfc > [ 84.336053] invoke_syscall+0x50/0x120 > [ 84.339791] el0_svc_common.constprop.0+0x68/0x104 > [ 84.344569] do_el0_svc+0x30/0x9c > [ 84.347872] el0_svc+0x2c/0x54 > [ 84.350916] el0_sync_handler+0x1a8/0x1ac > [ 84.354911] el0_sync+0x198/0x1c0 > [ 84.358215] irq event stamp: 0 > [ 84.361256] hardirqs last enabled at (0): [<0000000000000000>] 0x0 > [ 84.367507] hardirqs last disabled at (0): [<ffff80001004fe2c>] copy_process+0x44c/0x1800 > [ 84.375667] softirqs last enabled at (0): [<ffff80001004fe2c>] copy_process+0x44c/0x1800 > [ 84.383824] softirqs last disabled at (0): [<0000000000000000>] 0x0 > [ 84.390073] ---[ end trace af3448c784059129 ]--- -- Regards, Pratyush Yadav Texas Instruments Inc.
WARNING: multiple messages have this Message-ID (diff)
From: Pratyush Yadav <p.yadav@ti.com> To: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Cc: Maxime Ripard <mripard@kernel.org>, Mauro Carvalho Chehab <mchehab@kernel.org>, Rob Herring <robh+dt@kernel.org>, Kishon Vijay Abraham I <kishon@ti.com>, Vinod Koul <vkoul@kernel.org>, Peter Ujfalusi <peter.ujfalusi@gmail.com>, Steve Longerbeam <slongerbeam@gmail.com>, Benoit Parrot <bparrot@ti.com>, <linux-media@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-phy@lists.infradead.org>, <dmaengine@vger.kernel.org>, Vignesh Raghavendra <vigneshr@ti.com>, Chunfeng Yun <chunfeng.yun@mediatek.com>, Laurent Pinchart <laurent.pinchart@ideasonboard.com> Subject: Re: [PATCH v2 00/18] CSI2RX support on J721E Date: Thu, 3 Jun 2021 18:22:53 +0530 [thread overview] Message-ID: <20210603125251.nmzibyvfzkkxfbtj@ti.com> (raw) In-Reply-To: <83bcd60a-2a45-59b2-8ebe-26ad5d828965@ideasonboard.com> On 27/05/21 04:23PM, Tomi Valkeinen wrote: > Hi Pratyush, > > On 26/05/2021 18:22, Pratyush Yadav wrote: > > Hi, > > > > This series adds support for CSI2 capture on J721E. It includes some > > fixes to the Cadence CSI2RX driver, adds Rx support to Cadence DPHY > > driver, and finally adds the TI CSI2RX wrapper driver. > > > > Tested on TI's J721E with OV5640 sensor. > > I also see this after a few captures: Can you share the application/command you are using to test? I used yavta to test and didn't see any problems after leaving the stream on for around 10 minutes. > > [ 84.115503] ------------[ cut here ]------------ > [ 84.120144] DMA-API: ti-udma 31150000.dma-controller: mapping sg segment longer than device claims to support [len=1900544] [max=65536] > [ 84.132376] WARNING: CPU: 1 PID: 594 at kernel/dma/debug.c:1172 debug_dma_map_sg+0x304/0x390 > [ 84.140804] Modules linked in: ov5640 ti_cal j721e_csi2rx cdns_csi2rx cdns_dphy v4l2_fwnode tidss ti_tfp410 tc358767 display_connector cdns_mhdp8546 panel_simple drm_kms_helper d > rm drm_panel_orientation_quirks cfbfillrect cfbimgblt cfbcopyarea phy_j721e_wiz phy_cadence_torrent > [ 84.165298] CPU: 1 PID: 594 Comm: cam-mplex.py Not tainted 5.13.0-rc1-00206-g98bb91e95a28-dirty #5 > [ 84.174236] Hardware name: Texas Instruments K3 J721E SoC (DT) > [ 84.180051] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) > [ 84.186041] pc : debug_dma_map_sg+0x304/0x390 > [ 84.190383] lr : debug_dma_map_sg+0x304/0x390 > [ 84.194725] sp : ffff800014d0f730 > [ 84.198026] x29: ffff800014d0f730 x28: ffff000801544680 x27: ffffffffffffffff > [ 84.205148] x26: 0000000000000000 x25: 0000000000000002 x24: 0000000000000001 > [ 84.212269] x23: ffff80001163abe0 x22: 0000000000000000 x21: 0000000000000001 > [ 84.219390] x20: ffff000801fa3010 x19: ffff0008075c7580 x18: 0000000000000000 > [ 84.226510] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000030 > [ 84.233630] x14: 6e61687420726567 x13: 6e6f6c20746e656d x12: 7420736d69616c63 > [ 84.240751] x11: 2065636976656420 x10: ffff8000116b18f8 x9 : ffff8000100eb920 > [ 84.247871] x8 : ffff8000116598f8 x7 : ffff8000116b18f8 x6 : 0000000000000001 > [ 84.254991] x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000000000 > [ 84.262111] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0008066f8000 > [ 84.269230] Call trace: > [ 84.271665] debug_dma_map_sg+0x304/0x390 > [ 84.275660] dma_map_sg_attrs+0x70/0xb0 > [ 84.279486] drm_gem_map_dma_buf+0x6c/0xf0 [drm] > [ 84.284177] __map_dma_buf+0x28/0x80 > [ 84.287742] dma_buf_map_attachment+0xe4/0x200 > [ 84.292172] vb2_dc_map_dmabuf+0x3c/0x150 > [ 84.296171] __prepare_dmabuf+0x1dc/0x514 > [ 84.300168] __buf_prepare+0x1a0/0x25c > [ 84.303903] vb2_core_qbuf+0x3d4/0x72c > [ 84.307638] vb2_qbuf+0x9c/0xf4 > [ 84.310767] vb2_ioctl_qbuf+0x68/0x7c > [ 84.314416] v4l_qbuf+0x54/0x70 > [ 84.317545] __video_do_ioctl+0x194/0x400 > [ 84.321541] video_usercopy+0x19c/0x910 > [ 84.325362] video_ioctl2+0x24/0x40 > [ 84.328837] v4l2_ioctl+0x4c/0x70 > [ 84.332141] __arm64_sys_ioctl+0xb4/0xfc > [ 84.336053] invoke_syscall+0x50/0x120 > [ 84.339791] el0_svc_common.constprop.0+0x68/0x104 > [ 84.344569] do_el0_svc+0x30/0x9c > [ 84.347872] el0_svc+0x2c/0x54 > [ 84.350916] el0_sync_handler+0x1a8/0x1ac > [ 84.354911] el0_sync+0x198/0x1c0 > [ 84.358215] irq event stamp: 0 > [ 84.361256] hardirqs last enabled at (0): [<0000000000000000>] 0x0 > [ 84.367507] hardirqs last disabled at (0): [<ffff80001004fe2c>] copy_process+0x44c/0x1800 > [ 84.375667] softirqs last enabled at (0): [<ffff80001004fe2c>] copy_process+0x44c/0x1800 > [ 84.383824] softirqs last disabled at (0): [<0000000000000000>] 0x0 > [ 84.390073] ---[ end trace af3448c784059129 ]--- -- Regards, Pratyush Yadav Texas Instruments Inc. -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2021-06-03 12:53 UTC|newest] Thread overview: 96+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-05-26 15:22 [PATCH v2 00/18] CSI2RX support on J721E Pratyush Yadav 2021-05-26 15:22 ` Pratyush Yadav 2021-05-26 15:22 ` [PATCH v2 01/18] phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes Pratyush Yadav 2021-05-26 15:22 ` Pratyush Yadav 2021-05-26 15:22 ` [PATCH v2 02/18] phy: cdns-dphy: Prepare for Rx support Pratyush Yadav 2021-05-26 15:22 ` Pratyush Yadav 2021-05-26 15:22 ` [PATCH v2 03/18] phy: cdns-dphy: Allow setting mode Pratyush Yadav 2021-05-26 15:22 ` Pratyush Yadav 2021-05-26 15:22 ` [PATCH v2 04/18] phy: cdns-dphy: Add Rx support Pratyush Yadav 2021-05-26 15:22 ` Pratyush Yadav 2021-05-28 6:09 ` Tomi Valkeinen 2021-05-28 6:09 ` Tomi Valkeinen 2021-05-26 15:22 ` [PATCH v2 05/18] media: ov5640: Use runtime PM to control sensor power Pratyush Yadav 2021-05-26 15:22 ` Pratyush Yadav 2021-05-28 6:44 ` Tomi Valkeinen 2021-05-28 6:44 ` Tomi Valkeinen 2021-05-28 7:25 ` Pratyush Yadav 2021-05-28 7:25 ` Pratyush Yadav 2021-05-26 15:22 ` [PATCH v2 06/18] media: cadence: csi2rx: Add external DPHY support Pratyush Yadav 2021-05-26 15:22 ` Pratyush Yadav 2021-05-28 7:23 ` Tomi Valkeinen 2021-05-28 7:23 ` Tomi Valkeinen 2021-05-28 7:30 ` Pratyush Yadav 2021-05-28 7:30 ` Pratyush Yadav 2021-05-26 15:22 ` [PATCH v2 07/18] media: cadence: csi2rx: Soft reset the streams before starting capture Pratyush Yadav 2021-05-26 15:22 ` Pratyush Yadav 2021-05-26 15:22 ` [PATCH v2 08/18] media: cadence: csi2rx: Set the STOP bit when stopping a stream Pratyush Yadav 2021-05-26 15:22 ` Pratyush Yadav 2021-05-26 15:22 ` [PATCH v2 09/18] media: cadence: csi2rx: Fix stream data configuration Pratyush Yadav 2021-05-26 15:22 ` Pratyush Yadav 2021-05-26 15:23 ` [PATCH v2 10/18] media: cadence: csi2rx: Populate subdev devnode Pratyush Yadav 2021-05-26 15:23 ` Pratyush Yadav 2021-05-28 7:16 ` Tomi Valkeinen 2021-05-28 7:16 ` Tomi Valkeinen 2021-05-28 7:24 ` Pratyush Yadav 2021-05-28 7:24 ` Pratyush Yadav 2021-05-28 7:35 ` Tomi Valkeinen 2021-05-28 7:35 ` Tomi Valkeinen 2021-06-03 12:42 ` Pratyush Yadav 2021-06-03 12:42 ` Pratyush Yadav 2021-05-26 15:23 ` [PATCH v2 11/18] dmaengine: ti: k3-psil-j721e: Add entry for CSI2RX Pratyush Yadav 2021-05-26 15:23 ` Pratyush Yadav 2021-05-31 6:51 ` Péter Ujfalusi 2021-05-31 6:51 ` Péter Ujfalusi 2021-05-31 9:16 ` Pratyush Yadav 2021-05-31 9:16 ` Pratyush Yadav 2021-05-26 15:23 ` [PATCH v2 12/18] media: Re-structure TI platform drivers Pratyush Yadav 2021-05-26 15:23 ` Pratyush Yadav 2021-05-28 8:29 ` Tomi Valkeinen 2021-05-28 8:29 ` Tomi Valkeinen 2021-05-26 15:23 ` [PATCH v2 13/18] media: ti: Add CSI2RX support for J721E Pratyush Yadav 2021-05-26 15:23 ` Pratyush Yadav 2021-05-27 13:29 ` Tomi Valkeinen 2021-05-27 13:29 ` Tomi Valkeinen 2021-06-03 12:49 ` Pratyush Yadav 2021-06-03 12:49 ` Pratyush Yadav 2021-06-04 8:04 ` Tomi Valkeinen 2021-06-04 8:04 ` Tomi Valkeinen 2021-05-26 15:23 ` [PATCH v2 14/18] media: dt-bindings: Add DT bindings for TI J721E CSI2RX driver Pratyush Yadav 2021-05-26 15:23 ` Pratyush Yadav 2021-05-27 14:23 ` Rob Herring 2021-05-27 14:23 ` Rob Herring 2021-06-03 12:43 ` Pratyush Yadav 2021-06-03 12:43 ` Pratyush Yadav 2021-05-26 15:23 ` [PATCH v2 15/18] media: dt-bindings: Convert Cadence CSI2RX binding to YAML Pratyush Yadav 2021-05-26 15:23 ` Pratyush Yadav 2021-06-01 17:45 ` Rob Herring 2021-06-01 17:45 ` Rob Herring 2021-06-03 12:23 ` Pratyush Yadav 2021-06-03 12:23 ` Pratyush Yadav 2021-05-26 15:23 ` [PATCH v2 16/18] phy: dt-bindings: Convert Cadence DPHY " Pratyush Yadav 2021-05-26 15:23 ` Pratyush Yadav 2021-06-02 19:51 ` Rob Herring 2021-06-02 19:51 ` Rob Herring 2021-05-26 15:23 ` [PATCH v2 17/18] phy: dt-bindings: cdns,dphy: make clocks optional Pratyush Yadav 2021-05-26 15:23 ` Pratyush Yadav 2021-06-02 13:27 ` Maxime Ripard 2021-06-02 13:27 ` Maxime Ripard 2021-06-03 8:16 ` Pratyush Yadav 2021-06-03 8:16 ` Pratyush Yadav 2021-06-02 20:03 ` Rob Herring 2021-06-02 20:03 ` Rob Herring 2021-05-26 15:23 ` [PATCH v2 18/18] phy: dt-bindings: cdns,dphy: add power-domains property Pratyush Yadav 2021-05-26 15:23 ` [PATCH v2 18/18] phy: dt-bindings: cdns, dphy: " Pratyush Yadav 2021-06-02 20:03 ` [PATCH v2 18/18] phy: dt-bindings: cdns,dphy: " Rob Herring 2021-06-02 20:03 ` Rob Herring 2021-05-27 12:42 ` [PATCH v2 00/18] CSI2RX support on J721E Tomi Valkeinen 2021-05-27 12:42 ` Tomi Valkeinen 2021-06-03 12:54 ` Pratyush Yadav 2021-06-03 12:54 ` Pratyush Yadav 2021-05-27 13:23 ` Tomi Valkeinen 2021-05-27 13:23 ` Tomi Valkeinen 2021-06-03 12:52 ` Pratyush Yadav [this message] 2021-06-03 12:52 ` Pratyush Yadav 2021-06-04 7:54 ` Tomi Valkeinen 2021-06-04 7:54 ` Tomi Valkeinen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210603125251.nmzibyvfzkkxfbtj@ti.com \ --to=p.yadav@ti.com \ --cc=bparrot@ti.com \ --cc=chunfeng.yun@mediatek.com \ --cc=devicetree@vger.kernel.org \ --cc=dmaengine@vger.kernel.org \ --cc=kishon@ti.com \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=linux-phy@lists.infradead.org \ --cc=mchehab@kernel.org \ --cc=mripard@kernel.org \ --cc=peter.ujfalusi@gmail.com \ --cc=robh+dt@kernel.org \ --cc=slongerbeam@gmail.com \ --cc=tomi.valkeinen@ideasonboard.com \ --cc=vigneshr@ti.com \ --cc=vkoul@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.