From: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
To: Pratyush Yadav <p.yadav@ti.com>,
Maxime Ripard <mripard@kernel.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>,
Peter Ujfalusi <peter.ujfalusi@gmail.com>,
Steve Longerbeam <slongerbeam@gmail.com>,
Benoit Parrot <bparrot@ti.com>,
linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org,
dmaengine@vger.kernel.org
Cc: Vignesh Raghavendra <vigneshr@ti.com>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Subject: Re: [PATCH v2 00/18] CSI2RX support on J721E
Date: Thu, 27 May 2021 15:42:11 +0300 [thread overview]
Message-ID: <b5d4105b-f53b-4941-ea2d-77f47540b240@ideasonboard.com> (raw)
In-Reply-To: <20210526152308.16525-1-p.yadav@ti.com>
Hi Pratyush,
On 26/05/2021 18:22, Pratyush Yadav wrote:
> Hi,
>
> This series adds support for CSI2 capture on J721E. It includes some
> fixes to the Cadence CSI2RX driver, adds Rx support to Cadence DPHY
> driver, and finally adds the TI CSI2RX wrapper driver.
>
> Tested on TI's J721E with OV5640 sensor.
I'm having some trouble unloading and reloading the modules:
rmmod ti_cal
rmmod j721e_csi2rx
rmmod cdns_csi2rx
rmmod cdns_dphy
rmmod ov5640
[ 37.943128] ------------[ cut here ]------------
[ 37.947752] WARNING: CPU: 1 PID: 628 at drivers/media/v4l2-core/v4l2-ctrls-core.c:1807 __v4l2_ctrl_handler_setup+0x15c/0x170
[ 37.958963] Modules linked in: ov5640(-) v4l2_fwnode tidss ti_tfp410 tc358767 display_connector cdns_mhdp8546 panel_simple drm_kms_helper drm drm_panel_orientation_quirks cfbfill
rect cfbimgblt cfbcopyarea phy_j721e_wiz phy_cadence_torrent [last unloaded: cdns_dphy]
[ 37.982455] CPU: 1 PID: 628 Comm: rmmod Not tainted 5.13.0-rc1-00205-g93acc23badc8 #3
[ 37.990271] Hardware name: Texas Instruments K3 J721E SoC (DT)
[ 37.996090] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
[ 38.002085] pc : __v4l2_ctrl_handler_setup+0x15c/0x170
[ 38.007214] lr : __v4l2_ctrl_handler_setup+0x158/0x170
[ 38.012343] sp : ffff80001476fae0
[ 38.015648] x29: ffff80001476fae0 x28: ffff000806780000 x27: 0000000000000000
[ 38.022781] x26: ffff00080300b448 x25: ffff000804ad4ac0 x24: 0000000000000001
[ 38.029912] x23: 0000000000000000 x22: 0000000000000005 x21: ffff000801fa7880
[ 38.037043] x20: ffff000801fa7888 x19: ffff000801fa7ba8 x18: 0000000000000000
[ 38.044173] x17: 0000000000000000 x16: 0000000000000010 x15: 0000000000000001
[ 38.051305] x14: 000000000000003b x13: 00000000aaaaaaab x12: ffff800011a915b8
[ 38.058436] x11: 00000000000c001c x10: 000000008260a2b7 x9 : ffff800009362d9c
[ 38.065566] x8 : ffff800011887100 x7 : 0000000000000000 x6 : 0000000000000001
[ 38.072698] x5 : 0000000000000001 x4 : 0000000000000001 x3 : ffff800011260000
[ 38.079829] x2 : 00000000000000c0 x1 : 00000000000000c0 x0 : 0000000000000000
[ 38.086960] Call trace:
[ 38.089399] __v4l2_ctrl_handler_setup+0x15c/0x170
[ 38.094181] ov5640_resume+0x1fc/0x270 [ov5640]
[ 38.098709] __rpm_callback+0x98/0x160
[ 38.102452] rpm_callback+0x2c/0x90
[ 38.105934] rpm_resume+0x45c/0x6f4
[ 38.109415] __pm_runtime_resume+0x54/0xc0
[ 38.113503] __device_release_driver+0x40/0x240
[ 38.118025] driver_detach+0xd0/0x160
[ 38.121680] bus_remove_driver+0x68/0xe0
[ 38.125595] driver_unregister+0x3c/0x6c
[ 38.129509] i2c_del_driver+0x64/0xb0
[ 38.133166] ov5640_i2c_driver_exit+0x1c/0xc948 [ov5640]
[ 38.138469] __arm64_sys_delete_module+0x1b0/0x27c
[ 38.143251] invoke_syscall+0x50/0x120
[ 38.146995] el0_svc_common.constprop.0+0x68/0x104
[ 38.151777] do_el0_svc+0x30/0x9c
[ 38.155086] el0_svc+0x2c/0x54
[ 38.158135] el0_sync_handler+0x1a8/0x1ac
[ 38.162136] el0_sync+0x198/0x1c0
[ 38.165444] irq event stamp: 11302
[ 38.168837] hardirqs last enabled at (11301): [<ffff800010bf4e40>] _raw_spin_unlock_irq+0x50/0xa0
[ 38.177781] hardirqs last disabled at (11302): [<ffff800010be7a64>] el1_dbg+0x24/0xa0
[ 38.185595] softirqs last enabled at (10378): [<ffff800010010ba0>] __do_softirq+0x500/0x6bc
[ 38.194017] softirqs last disabled at (10373): [<ffff80001005d4c4>] __irq_exit_rcu+0x1d4/0x1e0
[ 38.202614] ---[ end trace 7037324a951cb149 ]---
rmmod v4l2_fwnode
insmod /root/nfs/work/linux/drivers/media/v4l2-core/v4l2-fwnode.ko
insmod /root/nfs/work/linux/drivers/phy/cadence/cdns-dphy.ko
insmod /root/nfs/work/linux/drivers/media/platform/cadence/cdns-csi2rx.ko
ERROR: Unhandled External Abort received on 0x80000001 from S-EL1
ERROR: exception reason=0 syndrome=0xbf000000
Unhandled Exception from EL1
x0 = 0x0000000000000000
x1 = 0xffff000804d59800
x2 = 0xffff8000146c4000
x3 = 0xffff800011260000
x4 = 0x0000000000000001
x5 = 0x0000000000000001
x6 = 0x0000000000000001
x7 = 0x0000000000000000
x8 = 0xffff800011887100
x9 = 0xffff800010bf5190
x10 = 0x000000008260a2b7
x11 = 0x00000000000c821d
x12 = 0xffff800011a915b8
x13 = 0x0000000000000001
x14 = 0x0000000000000000
x15 = 0x0000000000000020
x16 = 0x0000000000000000
x17 = 0x0000000000000000
x18 = 0x00000000fffffffb
x19 = 0xffff000806d44c00
x20 = 0x0000000000000000
x21 = 0xffff800009280058
x22 = 0xffff00080583c810
x23 = 0xffff00080583c800
x24 = 0xffff800009280058
x25 = 0x0000000000000047
x26 = 0xffff8000116d71d8
x27 = 0xffff800009280350
x28 = 0xffff800009280148
x29 = 0xffff80001432f850
x30 = 0xffff8000092506b8
scr_el3 = 0x000000000000073d
sctlr_el3 = 0x0000000030cd183f
cptr_el3 = 0x0000000000000000
tcr_el3 = 0x0000000080803520
daif = 0x00000000000002c0
mair_el3 = 0x00000000004404ff
spsr_el3 = 0x0000000000000005
elr_el3 = 0xffff80000925043c
ttbr0_el3 = 0x0000000070010b00
esr_el3 = 0x00000000bf000000
far_el3 = 0x0000000000000000
spsr_el1 = 0x0000000060000005
elr_el1 = 0xffff800010be8cb0
spsr_abt = 0x0000000000000000
spsr_und = 0x0000000000000000
spsr_irq = 0x0000000000000000
spsr_fiq = 0x0000000000000000
sctlr_el1 = 0x0000000034d4d91d
actlr_el1 = 0x0000000000000000
cpacr_el1 = 0x0000000000300000
csselr_el1 = 0x0000000000000000
sp_el1 = 0xffff80001432f850
esr_el1 = 0x0000000056000000
ttbr0_el1 = 0x0000000882773200
ttbr1_el1 = 0x06d8000083180000
mair_el1 = 0x000c0400bb44ffff
amair_el1 = 0x0000000000000000
tcr_el1 = 0x00000034f5d07590
tpidr_el1 = 0xffff80086e790000
tpidr_el0 = 0x0000ffff895c6910
tpidrro_el0 = 0x0000000000000000
par_el1 = 0x0000000000000000
mpidr_el1 = 0x0000000080000001
afsr0_el1 = 0x0000000000000000
afsr1_el1 = 0x0000000000000000
contextidr_el1 = 0x0000000000000000
vbar_el1 = 0xffff800010011000
cntp_ctl_el0 = 0x0000000000000005
cntp_cval_el0 = 0x000000023f77b7a1
cntv_ctl_el0 = 0x0000000000000000
cntv_cval_el0 = 0x0000000000000000
cntkctl_el1 = 0x00000000000000d6
sp_el0 = 0x000000007000abd0
isr_el1 = 0x0000000000000040
dacr32_el2 = 0x0000000000000000
ifsr32_el2 = 0x0000000000000000
cpuectlr_el1 = 0x0000001b00000040
cpumerrsr_el1 = 0x0000000000000000
l2merrsr_el1 = 0x0000000000000000
WARNING: multiple messages have this Message-ID (diff)
From: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
To: Pratyush Yadav <p.yadav@ti.com>,
Maxime Ripard <mripard@kernel.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>,
Peter Ujfalusi <peter.ujfalusi@gmail.com>,
Steve Longerbeam <slongerbeam@gmail.com>,
Benoit Parrot <bparrot@ti.com>,
linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org,
dmaengine@vger.kernel.org
Cc: Vignesh Raghavendra <vigneshr@ti.com>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Subject: Re: [PATCH v2 00/18] CSI2RX support on J721E
Date: Thu, 27 May 2021 15:42:11 +0300 [thread overview]
Message-ID: <b5d4105b-f53b-4941-ea2d-77f47540b240@ideasonboard.com> (raw)
In-Reply-To: <20210526152308.16525-1-p.yadav@ti.com>
Hi Pratyush,
On 26/05/2021 18:22, Pratyush Yadav wrote:
> Hi,
>
> This series adds support for CSI2 capture on J721E. It includes some
> fixes to the Cadence CSI2RX driver, adds Rx support to Cadence DPHY
> driver, and finally adds the TI CSI2RX wrapper driver.
>
> Tested on TI's J721E with OV5640 sensor.
I'm having some trouble unloading and reloading the modules:
rmmod ti_cal
rmmod j721e_csi2rx
rmmod cdns_csi2rx
rmmod cdns_dphy
rmmod ov5640
[ 37.943128] ------------[ cut here ]------------
[ 37.947752] WARNING: CPU: 1 PID: 628 at drivers/media/v4l2-core/v4l2-ctrls-core.c:1807 __v4l2_ctrl_handler_setup+0x15c/0x170
[ 37.958963] Modules linked in: ov5640(-) v4l2_fwnode tidss ti_tfp410 tc358767 display_connector cdns_mhdp8546 panel_simple drm_kms_helper drm drm_panel_orientation_quirks cfbfill
rect cfbimgblt cfbcopyarea phy_j721e_wiz phy_cadence_torrent [last unloaded: cdns_dphy]
[ 37.982455] CPU: 1 PID: 628 Comm: rmmod Not tainted 5.13.0-rc1-00205-g93acc23badc8 #3
[ 37.990271] Hardware name: Texas Instruments K3 J721E SoC (DT)
[ 37.996090] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
[ 38.002085] pc : __v4l2_ctrl_handler_setup+0x15c/0x170
[ 38.007214] lr : __v4l2_ctrl_handler_setup+0x158/0x170
[ 38.012343] sp : ffff80001476fae0
[ 38.015648] x29: ffff80001476fae0 x28: ffff000806780000 x27: 0000000000000000
[ 38.022781] x26: ffff00080300b448 x25: ffff000804ad4ac0 x24: 0000000000000001
[ 38.029912] x23: 0000000000000000 x22: 0000000000000005 x21: ffff000801fa7880
[ 38.037043] x20: ffff000801fa7888 x19: ffff000801fa7ba8 x18: 0000000000000000
[ 38.044173] x17: 0000000000000000 x16: 0000000000000010 x15: 0000000000000001
[ 38.051305] x14: 000000000000003b x13: 00000000aaaaaaab x12: ffff800011a915b8
[ 38.058436] x11: 00000000000c001c x10: 000000008260a2b7 x9 : ffff800009362d9c
[ 38.065566] x8 : ffff800011887100 x7 : 0000000000000000 x6 : 0000000000000001
[ 38.072698] x5 : 0000000000000001 x4 : 0000000000000001 x3 : ffff800011260000
[ 38.079829] x2 : 00000000000000c0 x1 : 00000000000000c0 x0 : 0000000000000000
[ 38.086960] Call trace:
[ 38.089399] __v4l2_ctrl_handler_setup+0x15c/0x170
[ 38.094181] ov5640_resume+0x1fc/0x270 [ov5640]
[ 38.098709] __rpm_callback+0x98/0x160
[ 38.102452] rpm_callback+0x2c/0x90
[ 38.105934] rpm_resume+0x45c/0x6f4
[ 38.109415] __pm_runtime_resume+0x54/0xc0
[ 38.113503] __device_release_driver+0x40/0x240
[ 38.118025] driver_detach+0xd0/0x160
[ 38.121680] bus_remove_driver+0x68/0xe0
[ 38.125595] driver_unregister+0x3c/0x6c
[ 38.129509] i2c_del_driver+0x64/0xb0
[ 38.133166] ov5640_i2c_driver_exit+0x1c/0xc948 [ov5640]
[ 38.138469] __arm64_sys_delete_module+0x1b0/0x27c
[ 38.143251] invoke_syscall+0x50/0x120
[ 38.146995] el0_svc_common.constprop.0+0x68/0x104
[ 38.151777] do_el0_svc+0x30/0x9c
[ 38.155086] el0_svc+0x2c/0x54
[ 38.158135] el0_sync_handler+0x1a8/0x1ac
[ 38.162136] el0_sync+0x198/0x1c0
[ 38.165444] irq event stamp: 11302
[ 38.168837] hardirqs last enabled at (11301): [<ffff800010bf4e40>] _raw_spin_unlock_irq+0x50/0xa0
[ 38.177781] hardirqs last disabled at (11302): [<ffff800010be7a64>] el1_dbg+0x24/0xa0
[ 38.185595] softirqs last enabled at (10378): [<ffff800010010ba0>] __do_softirq+0x500/0x6bc
[ 38.194017] softirqs last disabled at (10373): [<ffff80001005d4c4>] __irq_exit_rcu+0x1d4/0x1e0
[ 38.202614] ---[ end trace 7037324a951cb149 ]---
rmmod v4l2_fwnode
insmod /root/nfs/work/linux/drivers/media/v4l2-core/v4l2-fwnode.ko
insmod /root/nfs/work/linux/drivers/phy/cadence/cdns-dphy.ko
insmod /root/nfs/work/linux/drivers/media/platform/cadence/cdns-csi2rx.ko
ERROR: Unhandled External Abort received on 0x80000001 from S-EL1
ERROR: exception reason=0 syndrome=0xbf000000
Unhandled Exception from EL1
x0 = 0x0000000000000000
x1 = 0xffff000804d59800
x2 = 0xffff8000146c4000
x3 = 0xffff800011260000
x4 = 0x0000000000000001
x5 = 0x0000000000000001
x6 = 0x0000000000000001
x7 = 0x0000000000000000
x8 = 0xffff800011887100
x9 = 0xffff800010bf5190
x10 = 0x000000008260a2b7
x11 = 0x00000000000c821d
x12 = 0xffff800011a915b8
x13 = 0x0000000000000001
x14 = 0x0000000000000000
x15 = 0x0000000000000020
x16 = 0x0000000000000000
x17 = 0x0000000000000000
x18 = 0x00000000fffffffb
x19 = 0xffff000806d44c00
x20 = 0x0000000000000000
x21 = 0xffff800009280058
x22 = 0xffff00080583c810
x23 = 0xffff00080583c800
x24 = 0xffff800009280058
x25 = 0x0000000000000047
x26 = 0xffff8000116d71d8
x27 = 0xffff800009280350
x28 = 0xffff800009280148
x29 = 0xffff80001432f850
x30 = 0xffff8000092506b8
scr_el3 = 0x000000000000073d
sctlr_el3 = 0x0000000030cd183f
cptr_el3 = 0x0000000000000000
tcr_el3 = 0x0000000080803520
daif = 0x00000000000002c0
mair_el3 = 0x00000000004404ff
spsr_el3 = 0x0000000000000005
elr_el3 = 0xffff80000925043c
ttbr0_el3 = 0x0000000070010b00
esr_el3 = 0x00000000bf000000
far_el3 = 0x0000000000000000
spsr_el1 = 0x0000000060000005
elr_el1 = 0xffff800010be8cb0
spsr_abt = 0x0000000000000000
spsr_und = 0x0000000000000000
spsr_irq = 0x0000000000000000
spsr_fiq = 0x0000000000000000
sctlr_el1 = 0x0000000034d4d91d
actlr_el1 = 0x0000000000000000
cpacr_el1 = 0x0000000000300000
csselr_el1 = 0x0000000000000000
sp_el1 = 0xffff80001432f850
esr_el1 = 0x0000000056000000
ttbr0_el1 = 0x0000000882773200
ttbr1_el1 = 0x06d8000083180000
mair_el1 = 0x000c0400bb44ffff
amair_el1 = 0x0000000000000000
tcr_el1 = 0x00000034f5d07590
tpidr_el1 = 0xffff80086e790000
tpidr_el0 = 0x0000ffff895c6910
tpidrro_el0 = 0x0000000000000000
par_el1 = 0x0000000000000000
mpidr_el1 = 0x0000000080000001
afsr0_el1 = 0x0000000000000000
afsr1_el1 = 0x0000000000000000
contextidr_el1 = 0x0000000000000000
vbar_el1 = 0xffff800010011000
cntp_ctl_el0 = 0x0000000000000005
cntp_cval_el0 = 0x000000023f77b7a1
cntv_ctl_el0 = 0x0000000000000000
cntv_cval_el0 = 0x0000000000000000
cntkctl_el1 = 0x00000000000000d6
sp_el0 = 0x000000007000abd0
isr_el1 = 0x0000000000000040
dacr32_el2 = 0x0000000000000000
ifsr32_el2 = 0x0000000000000000
cpuectlr_el1 = 0x0000001b00000040
cpumerrsr_el1 = 0x0000000000000000
l2merrsr_el1 = 0x0000000000000000
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2021-05-27 12:42 UTC|newest]
Thread overview: 96+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-26 15:22 [PATCH v2 00/18] CSI2RX support on J721E Pratyush Yadav
2021-05-26 15:22 ` Pratyush Yadav
2021-05-26 15:22 ` [PATCH v2 01/18] phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes Pratyush Yadav
2021-05-26 15:22 ` Pratyush Yadav
2021-05-26 15:22 ` [PATCH v2 02/18] phy: cdns-dphy: Prepare for Rx support Pratyush Yadav
2021-05-26 15:22 ` Pratyush Yadav
2021-05-26 15:22 ` [PATCH v2 03/18] phy: cdns-dphy: Allow setting mode Pratyush Yadav
2021-05-26 15:22 ` Pratyush Yadav
2021-05-26 15:22 ` [PATCH v2 04/18] phy: cdns-dphy: Add Rx support Pratyush Yadav
2021-05-26 15:22 ` Pratyush Yadav
2021-05-28 6:09 ` Tomi Valkeinen
2021-05-28 6:09 ` Tomi Valkeinen
2021-05-26 15:22 ` [PATCH v2 05/18] media: ov5640: Use runtime PM to control sensor power Pratyush Yadav
2021-05-26 15:22 ` Pratyush Yadav
2021-05-28 6:44 ` Tomi Valkeinen
2021-05-28 6:44 ` Tomi Valkeinen
2021-05-28 7:25 ` Pratyush Yadav
2021-05-28 7:25 ` Pratyush Yadav
2021-05-26 15:22 ` [PATCH v2 06/18] media: cadence: csi2rx: Add external DPHY support Pratyush Yadav
2021-05-26 15:22 ` Pratyush Yadav
2021-05-28 7:23 ` Tomi Valkeinen
2021-05-28 7:23 ` Tomi Valkeinen
2021-05-28 7:30 ` Pratyush Yadav
2021-05-28 7:30 ` Pratyush Yadav
2021-05-26 15:22 ` [PATCH v2 07/18] media: cadence: csi2rx: Soft reset the streams before starting capture Pratyush Yadav
2021-05-26 15:22 ` Pratyush Yadav
2021-05-26 15:22 ` [PATCH v2 08/18] media: cadence: csi2rx: Set the STOP bit when stopping a stream Pratyush Yadav
2021-05-26 15:22 ` Pratyush Yadav
2021-05-26 15:22 ` [PATCH v2 09/18] media: cadence: csi2rx: Fix stream data configuration Pratyush Yadav
2021-05-26 15:22 ` Pratyush Yadav
2021-05-26 15:23 ` [PATCH v2 10/18] media: cadence: csi2rx: Populate subdev devnode Pratyush Yadav
2021-05-26 15:23 ` Pratyush Yadav
2021-05-28 7:16 ` Tomi Valkeinen
2021-05-28 7:16 ` Tomi Valkeinen
2021-05-28 7:24 ` Pratyush Yadav
2021-05-28 7:24 ` Pratyush Yadav
2021-05-28 7:35 ` Tomi Valkeinen
2021-05-28 7:35 ` Tomi Valkeinen
2021-06-03 12:42 ` Pratyush Yadav
2021-06-03 12:42 ` Pratyush Yadav
2021-05-26 15:23 ` [PATCH v2 11/18] dmaengine: ti: k3-psil-j721e: Add entry for CSI2RX Pratyush Yadav
2021-05-26 15:23 ` Pratyush Yadav
2021-05-31 6:51 ` Péter Ujfalusi
2021-05-31 6:51 ` Péter Ujfalusi
2021-05-31 9:16 ` Pratyush Yadav
2021-05-31 9:16 ` Pratyush Yadav
2021-05-26 15:23 ` [PATCH v2 12/18] media: Re-structure TI platform drivers Pratyush Yadav
2021-05-26 15:23 ` Pratyush Yadav
2021-05-28 8:29 ` Tomi Valkeinen
2021-05-28 8:29 ` Tomi Valkeinen
2021-05-26 15:23 ` [PATCH v2 13/18] media: ti: Add CSI2RX support for J721E Pratyush Yadav
2021-05-26 15:23 ` Pratyush Yadav
2021-05-27 13:29 ` Tomi Valkeinen
2021-05-27 13:29 ` Tomi Valkeinen
2021-06-03 12:49 ` Pratyush Yadav
2021-06-03 12:49 ` Pratyush Yadav
2021-06-04 8:04 ` Tomi Valkeinen
2021-06-04 8:04 ` Tomi Valkeinen
2021-05-26 15:23 ` [PATCH v2 14/18] media: dt-bindings: Add DT bindings for TI J721E CSI2RX driver Pratyush Yadav
2021-05-26 15:23 ` Pratyush Yadav
2021-05-27 14:23 ` Rob Herring
2021-05-27 14:23 ` Rob Herring
2021-06-03 12:43 ` Pratyush Yadav
2021-06-03 12:43 ` Pratyush Yadav
2021-05-26 15:23 ` [PATCH v2 15/18] media: dt-bindings: Convert Cadence CSI2RX binding to YAML Pratyush Yadav
2021-05-26 15:23 ` Pratyush Yadav
2021-06-01 17:45 ` Rob Herring
2021-06-01 17:45 ` Rob Herring
2021-06-03 12:23 ` Pratyush Yadav
2021-06-03 12:23 ` Pratyush Yadav
2021-05-26 15:23 ` [PATCH v2 16/18] phy: dt-bindings: Convert Cadence DPHY " Pratyush Yadav
2021-05-26 15:23 ` Pratyush Yadav
2021-06-02 19:51 ` Rob Herring
2021-06-02 19:51 ` Rob Herring
2021-05-26 15:23 ` [PATCH v2 17/18] phy: dt-bindings: cdns,dphy: make clocks optional Pratyush Yadav
2021-05-26 15:23 ` Pratyush Yadav
2021-06-02 13:27 ` Maxime Ripard
2021-06-02 13:27 ` Maxime Ripard
2021-06-03 8:16 ` Pratyush Yadav
2021-06-03 8:16 ` Pratyush Yadav
2021-06-02 20:03 ` Rob Herring
2021-06-02 20:03 ` Rob Herring
2021-05-26 15:23 ` [PATCH v2 18/18] phy: dt-bindings: cdns,dphy: add power-domains property Pratyush Yadav
2021-05-26 15:23 ` [PATCH v2 18/18] phy: dt-bindings: cdns, dphy: " Pratyush Yadav
2021-06-02 20:03 ` [PATCH v2 18/18] phy: dt-bindings: cdns,dphy: " Rob Herring
2021-06-02 20:03 ` Rob Herring
2021-05-27 12:42 ` Tomi Valkeinen [this message]
2021-05-27 12:42 ` [PATCH v2 00/18] CSI2RX support on J721E Tomi Valkeinen
2021-06-03 12:54 ` Pratyush Yadav
2021-06-03 12:54 ` Pratyush Yadav
2021-05-27 13:23 ` Tomi Valkeinen
2021-05-27 13:23 ` Tomi Valkeinen
2021-06-03 12:52 ` Pratyush Yadav
2021-06-03 12:52 ` Pratyush Yadav
2021-06-04 7:54 ` Tomi Valkeinen
2021-06-04 7:54 ` Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b5d4105b-f53b-4941-ea2d-77f47540b240@ideasonboard.com \
--to=tomi.valkeinen@ideasonboard.com \
--cc=bparrot@ti.com \
--cc=chunfeng.yun@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=kishon@ti.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=mchehab@kernel.org \
--cc=mripard@kernel.org \
--cc=p.yadav@ti.com \
--cc=peter.ujfalusi@gmail.com \
--cc=robh+dt@kernel.org \
--cc=slongerbeam@gmail.com \
--cc=vigneshr@ti.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.