[PATCH v2 00/12] drm/msm/hdmi: YAML-ify schema and cleanup some platform properties

[PATCH v2 00/12] drm/msm/hdmi: YAML-ify schema and cleanup some platform properties

[Dmitry Baryshkov]

As agreed with David, this is a continuation of his work started at [1].
I didn't pick up his R-b tag for the first patch, since patch has been
heavily modified.

Changes since v1:
- Dropped quotes in $id/$schema
- Sorted out compat strings alphabetically
- Removed obvious descriptions
- Removed undocumented qcom,hdmi-tx-ddc-* properties
- Switched to additionalProperties
- Fixed IRQ and GPIO flags in the schema example
- Added 8084 and 8660 variants to qcom,hdmi-phy-other.yaml conditional

- Marked hdmi-mux-supply as deprecated (and dropped it from
  apq8064-ifc6410.dtsi)
- Reused 8960 regulator/clock configs for 8x60 (verified against msm-3.4
  kernel)

Changes since his patches:
HDMI schema:
- Dropped generic pinctrl properties
- Dropped data-lanes property, which is not supported by the HDMI driver
- Switched to unevaluatedProperties
- Moved clocks/regulators/supplies to condition clauses
- Specified phy-names as used by existing DT files
- Dropped #phy-cells
- Dropped power-domains property (which is not used by the device trees)
- Marked old GPIO properties as deprecated (in a separate patch)

HDMI PHY schema:
- Split into QMP (msm8996) and non-QMP (other) PHY schemas
- Added proper clocks/clock-names/reg/reg-names descriptions

The rest of the patches consist of the new work. They further cleanup
the platform configs, remove unused supplies, etc.

[1]: https://patchwork.freedesktop.org/series/98353/


Dmitry Baryshkov (12):
  dt-bindings: display/msm: hdmi: split and convert to yaml
  dt-bindings: display/msm: hdmi: mark old GPIO properties as deprecated
  dt-bindings: display/msm: hdmi: mark hdmi-mux-supply as deprecated
  arm: dts: qcom: apq8064-ifc6410: drop hdmi-mux-supply
  drm/msm/hdmi: drop the hdmi-mux support
  drm/msm/hdmi: drop unused GPIO support
  drm/msm/hdmi: enable core-vcc/core-vdda-supply for 8996 platform
  drm/msm/hdmi: drop empty 'none' regulator lists
  drm/msm/hdmi: drop hpd_regs usage on 8x74/8084
  drm/msm/hdmi: merge platform config for 8974/8084/8994/8996
  drm/msm/hdmi: reuse MSM8960's config for MSM8660
  drm/msm/hdmi-phy: populate 8x60 HDMI PHY requirements

 .../devicetree/bindings/display/msm/hdmi.txt  |  99 --------
 .../devicetree/bindings/display/msm/hdmi.yaml | 234 ++++++++++++++++++
 .../bindings/phy/qcom,hdmi-phy-other.yaml     | 103 ++++++++
 .../bindings/phy/qcom,hdmi-phy-qmp.yaml       |  83 +++++++
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts    |   1 -
 drivers/gpu/drm/msm/hdmi/hdmi.c               | 104 ++------
 drivers/gpu/drm/msm/hdmi/hdmi.h               |  13 +-
 drivers/gpu/drm/msm/hdmi/hdmi_hpd.c           |  62 +----
 drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c      |  12 +
 9 files changed, 454 insertions(+), 257 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/msm/hdmi.txt
 create mode 100644 Documentation/devicetree/bindings/display/msm/hdmi.yaml
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml

-- 
2.35.1

[PATCH v2 00/12] drm/msm/hdmi: YAML-ify schema and cleanup some platform properties

[Dmitry Baryshkov]

As agreed with David, this is a continuation of his work started at [1].
I didn't pick up his R-b tag for the first patch, since patch has been
heavily modified.

Changes since v1:
- Dropped quotes in $id/$schema
- Sorted out compat strings alphabetically
- Removed obvious descriptions
- Removed undocumented qcom,hdmi-tx-ddc-* properties
- Switched to additionalProperties
- Fixed IRQ and GPIO flags in the schema example
- Added 8084 and 8660 variants to qcom,hdmi-phy-other.yaml conditional

- Marked hdmi-mux-supply as deprecated (and dropped it from
  apq8064-ifc6410.dtsi)
- Reused 8960 regulator/clock configs for 8x60 (verified against msm-3.4
  kernel)

Changes since his patches:
HDMI schema:
- Dropped generic pinctrl properties
- Dropped data-lanes property, which is not supported by the HDMI driver
- Switched to unevaluatedProperties
- Moved clocks/regulators/supplies to condition clauses
- Specified phy-names as used by existing DT files
- Dropped #phy-cells
- Dropped power-domains property (which is not used by the device trees)
- Marked old GPIO properties as deprecated (in a separate patch)

HDMI PHY schema:
- Split into QMP (msm8996) and non-QMP (other) PHY schemas
- Added proper clocks/clock-names/reg/reg-names descriptions

The rest of the patches consist of the new work. They further cleanup
the platform configs, remove unused supplies, etc.

[1]: https://patchwork.freedesktop.org/series/98353/


Dmitry Baryshkov (12):
  dt-bindings: display/msm: hdmi: split and convert to yaml
  dt-bindings: display/msm: hdmi: mark old GPIO properties as deprecated
  dt-bindings: display/msm: hdmi: mark hdmi-mux-supply as deprecated
  arm: dts: qcom: apq8064-ifc6410: drop hdmi-mux-supply
  drm/msm/hdmi: drop the hdmi-mux support
  drm/msm/hdmi: drop unused GPIO support
  drm/msm/hdmi: enable core-vcc/core-vdda-supply for 8996 platform
  drm/msm/hdmi: drop empty 'none' regulator lists
  drm/msm/hdmi: drop hpd_regs usage on 8x74/8084
  drm/msm/hdmi: merge platform config for 8974/8084/8994/8996
  drm/msm/hdmi: reuse MSM8960's config for MSM8660
  drm/msm/hdmi-phy: populate 8x60 HDMI PHY requirements

 .../devicetree/bindings/display/msm/hdmi.txt  |  99 --------
 .../devicetree/bindings/display/msm/hdmi.yaml | 234 ++++++++++++++++++
 .../bindings/phy/qcom,hdmi-phy-other.yaml     | 103 ++++++++
 .../bindings/phy/qcom,hdmi-phy-qmp.yaml       |  83 +++++++
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts    |   1 -
 drivers/gpu/drm/msm/hdmi/hdmi.c               | 104 ++------
 drivers/gpu/drm/msm/hdmi/hdmi.h               |  13 +-
 drivers/gpu/drm/msm/hdmi/hdmi_hpd.c           |  62 +----
 drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c      |  12 +
 9 files changed, 454 insertions(+), 257 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/msm/hdmi.txt
 create mode 100644 Documentation/devicetree/bindings/display/msm/hdmi.yaml
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml

-- 
2.35.1

[PATCH v2 01/12] dt-bindings: display/msm: hdmi: split and convert to yaml

[Dmitry Baryshkov]

Convert Qualcomm HDMI binding into HDMI TX and PHY yaml bindings.

Changes to schema:
HDMI:
 - fixed reg-names numbering to match 0..3 instead 0,1,3,4
 - dropped qcom,tx-ddc-* from example, they were not documented

PHY:
 - moved into phy/ directory
 - split into QMP and non-QMP PHY schemas

Co-developed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 .../devicetree/bindings/display/msm/hdmi.txt  |  99 --------
 .../devicetree/bindings/display/msm/hdmi.yaml | 230 ++++++++++++++++++
 .../bindings/phy/qcom,hdmi-phy-other.yaml     | 103 ++++++++
 .../bindings/phy/qcom,hdmi-phy-qmp.yaml       |  83 +++++++
 4 files changed, 416 insertions(+), 99 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/msm/hdmi.txt
 create mode 100644 Documentation/devicetree/bindings/display/msm/hdmi.yaml
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml

diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt
deleted file mode 100644
index 5f90a40da51b..000000000000
--- a/Documentation/devicetree/bindings/display/msm/hdmi.txt
+++ /dev/null
@@ -1,99 +0,0 @@
-Qualcomm adreno/snapdragon hdmi output
-
-Required properties:
-- compatible: one of the following
-   * "qcom,hdmi-tx-8996"
-   * "qcom,hdmi-tx-8994"
-   * "qcom,hdmi-tx-8084"
-   * "qcom,hdmi-tx-8974"
-   * "qcom,hdmi-tx-8660"
-   * "qcom,hdmi-tx-8960"
-- reg: Physical base address and length of the controller's registers
-- reg-names: "core_physical"
-- interrupts: The interrupt signal from the hdmi block.
-- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: device clocks
-  See ../clocks/clock-bindings.txt for details.
-- core-vdda-supply: phandle to supply regulator
-- hdmi-mux-supply: phandle to mux regulator
-- phys: the phandle for the HDMI PHY device
-- phy-names: the name of the corresponding PHY device
-
-Optional properties:
-- hpd-gpios: hpd pin
-- qcom,hdmi-tx-mux-en-gpios: hdmi mux enable pin
-- qcom,hdmi-tx-mux-sel-gpios: hdmi mux select pin
-- qcom,hdmi-tx-mux-lpm-gpios: hdmi mux lpm pin
-- power-domains: reference to the power domain(s), if available.
-- pinctrl-names: the pin control state names; should contain "default"
-- pinctrl-0: the default pinctrl state (active)
-- pinctrl-1: the "sleep" pinctrl state
-
-HDMI PHY:
-Required properties:
-- compatible: Could be the following
-  * "qcom,hdmi-phy-8660"
-  * "qcom,hdmi-phy-8960"
-  * "qcom,hdmi-phy-8974"
-  * "qcom,hdmi-phy-8084"
-  * "qcom,hdmi-phy-8996"
-- #phy-cells: Number of cells in a PHY specifier; Should be 0.
-- reg: Physical base address and length of the registers of the PHY sub blocks.
-- reg-names: The names of register regions. The following regions are required:
-  * "hdmi_phy"
-  * "hdmi_pll"
-  For HDMI PHY on msm8996, these additional register regions are required:
-    * "hdmi_tx_l0"
-    * "hdmi_tx_l1"
-    * "hdmi_tx_l3"
-    * "hdmi_tx_l4"
-- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: device clocks
-  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- core-vdda-supply: phandle to vdda regulator device node
-
-Example:
-
-/ {
-	...
-
-	hdmi: hdmi@4a00000 {
-		compatible = "qcom,hdmi-tx-8960";
-		reg-names = "core_physical";
-		reg = <0x04a00000 0x2f0>;
-		interrupts = <GIC_SPI 79 0>;
-		power-domains = <&mmcc MDSS_GDSC>;
-		clock-names =
-		    "core",
-		    "master_iface",
-		    "slave_iface";
-		clocks =
-		    <&mmcc HDMI_APP_CLK>,
-		    <&mmcc HDMI_M_AHB_CLK>,
-		    <&mmcc HDMI_S_AHB_CLK>;
-		qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>;
-		qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>;
-		qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
-		core-vdda-supply = <&pm8921_hdmi_mvs>;
-		hdmi-mux-supply = <&ext_3p3v>;
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&hpd_active  &ddc_active  &cec_active>;
-		pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>;
-
-		phys = <&hdmi_phy>;
-		phy-names = "hdmi_phy";
-	};
-
-	hdmi_phy: phy@4a00400 {
-		compatible = "qcom,hdmi-phy-8960";
-		reg-names = "hdmi_phy",
-			    "hdmi_pll";
-		reg = <0x4a00400 0x60>,
-		      <0x4a00500 0x100>;
-		#phy-cells = <0>;
-		power-domains = <&mmcc MDSS_GDSC>;
-		clock-names = "slave_iface";
-		clocks = <&mmcc HDMI_S_AHB_CLK>;
-		core-vdda-supply = <&pm8921_hdmi_mvs>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.yaml b/Documentation/devicetree/bindings/display/msm/hdmi.yaml
new file mode 100644
index 000000000000..ef425c649ead
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/hdmi.yaml
@@ -0,0 +1,230 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/display/msm/hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon HDMI output
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - qcom,hdmi-tx-8084
+      - qcom,hdmi-tx-8660
+      - qcom,hdmi-tx-8960
+      - qcom,hdmi-tx-8974
+      - qcom,hdmi-tx-8994
+      - qcom,hdmi-tx-8996
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: core_physical
+      - const: qfprom_physical
+      - const: hdcp_physical
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    enum:
+      - hdmi_phy
+      - hdmi-phy
+
+  core-vdda-supply:
+    description: phandle to VDDA supply regulator
+
+  hdmi-mux-supply:
+    description: phandle to mux regulator
+
+  core-vcc-supply:
+    description: phandle to VCC supply regulator
+
+  hpd-gpios:
+    maxItems: 1
+    description: hpd pin
+
+  qcom,hdmi-tx-mux-en-gpios:
+    maxItems: 1
+    description: HDMI mux enable pin
+
+  qcom,hdmi-tx-mux-sel-gpios:
+    maxItems: 1
+    description: HDMI mux select pin
+
+  qcom,hdmi-tx-mux-lpm-gpios:
+    maxItems: 1
+    description: HDMI mux lpm pin
+
+  '#sound-dai-cells':
+    const: 1
+
+  ports:
+    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: |
+          Output endpoints of the controller.
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - interrupts
+  - phys
+  - phy-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-tx-8960
+              - qcom,hdmi-tx-8660
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: core
+            - const: master_iface
+            - const: slave_iface
+        core-vcc-supplies: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-tx-8974
+              - qcom,hdmi-tx-8084
+              - qcom,hdmi-tx-8994
+              - qcom,hdmi-tx-8996
+    then:
+      properties:
+        clocks:
+          minItems: 5
+        clock-names:
+          items:
+            - const: mdp_core
+            - const: iface
+            - const: core
+            - const: alt_iface
+            - const: extp
+        hdmi-mux-supplies: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    hdmi: hdmi@4a00000 {
+      compatible = "qcom,hdmi-tx-8960";
+      reg-names = "core_physical";
+      reg = <0x04a00000 0x2f0>;
+      interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+      clock-names = "core",
+                    "master_iface",
+                    "slave_iface";
+      clocks = <&clk 61>,
+               <&clk 72>,
+               <&clk 98>;
+      hpd-gpios = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
+      core-vdda-supply = <&pm8921_hdmi_mvs>;
+      hdmi-mux-supply = <&ext_3p3v>;
+      pinctrl-names = "default", "sleep";
+      pinctrl-0 = <&hpd_active  &ddc_active  &cec_active>;
+      pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>;
+
+      phys = <&hdmi_phy>;
+      phy-names = "hdmi_phy";
+    };
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+    #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    hdmi@9a0000 {
+      compatible = "qcom,hdmi-tx-8996";
+      reg = <0x009a0000 0x50c>,
+            <0x00070000 0x6158>,
+            <0x009e0000 0xfff>;
+      reg-names = "core_physical",
+                  "qfprom_physical",
+                  "hdcp_physical";
+
+      interrupt-parent = <&mdss>;
+      interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&mmcc MDSS_MDP_CLK>,
+               <&mmcc MDSS_AHB_CLK>,
+               <&mmcc MDSS_HDMI_CLK>,
+               <&mmcc MDSS_HDMI_AHB_CLK>,
+               <&mmcc MDSS_EXTPCLK_CLK>;
+      clock-names = "mdp_core",
+                    "iface",
+                    "core",
+                    "alt_iface",
+                    "extp";
+
+      phys = <&hdmi_phy>;
+      phy-names = "hdmi_phy";
+      #sound-dai-cells = <1>;
+
+      pinctrl-names = "default", "sleep";
+      pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
+      pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
+
+      core-vdda-supply = <&vreg_l12a_1p8>;
+      core-vcc-supply = <&vreg_s4a_1p8>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+          endpoint {
+            remote-endpoint = <&mdp5_intf3_out>;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml
new file mode 100644
index 000000000000..3a6128d8f6fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/phy/qcom,hdmi-phy-other.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon HDMI phy
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - qcom,hdmi-phy-8660
+      - qcom,hdmi-phy-8960
+      - qcom,hdmi-phy-8974
+      - qcom,hdmi-phy-8084
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: hdmi_phy
+      - const: hdmi_pll
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  core-vdda-supply:
+    description: phandle to VDDA supply regulator
+  vddio-supply:
+    description: phandle to VDD I/O supply regulator
+
+  '#phy-cells':
+    const: 0
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-phy-8660
+              - qcom,hdmi-phy-8960
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: slave_iface
+        vddio-supply: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-phy-8084
+              - qcom,hdmi-phy-8974
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          items:
+            - const: iface
+            - const: alt_iface
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - reg-names
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    hdmi_phy: phy@4a00400 {
+      compatible = "qcom,hdmi-phy-8960";
+      reg-names = "hdmi_phy",
+                  "hdmi_pll";
+      reg = <0x4a00400 0x60>,
+            <0x4a00500 0x100>;
+      #phy-cells = <0>;
+      power-domains = <&mmcc 1>;
+      clock-names = "slave_iface";
+      clocks = <&clk 21>;
+      core-vdda-supply = <&pm8921_hdmi_mvs>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml
new file mode 100644
index 000000000000..3784e11bf2ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/phy/qcom,hdmi-phy-qmp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon QMP HDMI phy
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - qcom,hdmi-phy-8996
+
+  reg:
+    maxItems: 6
+
+  reg-names:
+    items:
+      - const: hdmi_pll
+      - const: hdmi_tx_l0
+      - const: hdmi_tx_l1
+      - const: hdmi_tx_l2
+      - const: hdmi_tx_l3
+      - const: hdmi_phy
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ref
+
+  power-domains:
+    maxItems: 1
+
+  vcca-supply: true
+
+  vddio-supply: true
+
+  '#phy-cells':
+    const: 0
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    hdmi-phy@9a0600 {
+      compatible = "qcom,hdmi-phy-8996";
+      reg = <0x009a0600 0x1c4>,
+            <0x009a0a00 0x124>,
+            <0x009a0c00 0x124>,
+            <0x009a0e00 0x124>,
+            <0x009a1000 0x124>,
+            <0x009a1200 0x0c8>;
+      reg-names = "hdmi_pll",
+                  "hdmi_tx_l0",
+                  "hdmi_tx_l1",
+                  "hdmi_tx_l2",
+                  "hdmi_tx_l3",
+                  "hdmi_phy";
+
+      clocks = <&mmcc 116>,
+               <&gcc 214>;
+      clock-names = "iface",
+                    "ref";
+      #phy-cells = <0>;
+
+      vddio-supply = <&vreg_l12a_1p8>;
+      vcca-supply = <&vreg_l28a_0p925>;
+    };
-- 
2.35.1

[PATCH v2 01/12] dt-bindings: display/msm: hdmi: split and convert to yaml

[Dmitry Baryshkov]

Convert Qualcomm HDMI binding into HDMI TX and PHY yaml bindings.

Changes to schema:
HDMI:
 - fixed reg-names numbering to match 0..3 instead 0,1,3,4
 - dropped qcom,tx-ddc-* from example, they were not documented

PHY:
 - moved into phy/ directory
 - split into QMP and non-QMP PHY schemas

Co-developed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 .../devicetree/bindings/display/msm/hdmi.txt  |  99 --------
 .../devicetree/bindings/display/msm/hdmi.yaml | 230 ++++++++++++++++++
 .../bindings/phy/qcom,hdmi-phy-other.yaml     | 103 ++++++++
 .../bindings/phy/qcom,hdmi-phy-qmp.yaml       |  83 +++++++
 4 files changed, 416 insertions(+), 99 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/msm/hdmi.txt
 create mode 100644 Documentation/devicetree/bindings/display/msm/hdmi.yaml
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml

diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt
deleted file mode 100644
index 5f90a40da51b..000000000000
--- a/Documentation/devicetree/bindings/display/msm/hdmi.txt
+++ /dev/null
@@ -1,99 +0,0 @@
-Qualcomm adreno/snapdragon hdmi output
-
-Required properties:
-- compatible: one of the following
-   * "qcom,hdmi-tx-8996"
-   * "qcom,hdmi-tx-8994"
-   * "qcom,hdmi-tx-8084"
-   * "qcom,hdmi-tx-8974"
-   * "qcom,hdmi-tx-8660"
-   * "qcom,hdmi-tx-8960"
-- reg: Physical base address and length of the controller's registers
-- reg-names: "core_physical"
-- interrupts: The interrupt signal from the hdmi block.
-- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: device clocks
-  See ../clocks/clock-bindings.txt for details.
-- core-vdda-supply: phandle to supply regulator
-- hdmi-mux-supply: phandle to mux regulator
-- phys: the phandle for the HDMI PHY device
-- phy-names: the name of the corresponding PHY device
-
-Optional properties:
-- hpd-gpios: hpd pin
-- qcom,hdmi-tx-mux-en-gpios: hdmi mux enable pin
-- qcom,hdmi-tx-mux-sel-gpios: hdmi mux select pin
-- qcom,hdmi-tx-mux-lpm-gpios: hdmi mux lpm pin
-- power-domains: reference to the power domain(s), if available.
-- pinctrl-names: the pin control state names; should contain "default"
-- pinctrl-0: the default pinctrl state (active)
-- pinctrl-1: the "sleep" pinctrl state
-
-HDMI PHY:
-Required properties:
-- compatible: Could be the following
-  * "qcom,hdmi-phy-8660"
-  * "qcom,hdmi-phy-8960"
-  * "qcom,hdmi-phy-8974"
-  * "qcom,hdmi-phy-8084"
-  * "qcom,hdmi-phy-8996"
-- #phy-cells: Number of cells in a PHY specifier; Should be 0.
-- reg: Physical base address and length of the registers of the PHY sub blocks.
-- reg-names: The names of register regions. The following regions are required:
-  * "hdmi_phy"
-  * "hdmi_pll"
-  For HDMI PHY on msm8996, these additional register regions are required:
-    * "hdmi_tx_l0"
-    * "hdmi_tx_l1"
-    * "hdmi_tx_l3"
-    * "hdmi_tx_l4"
-- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: device clocks
-  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- core-vdda-supply: phandle to vdda regulator device node
-
-Example:
-
-/ {
-	...
-
-	hdmi: hdmi@4a00000 {
-		compatible = "qcom,hdmi-tx-8960";
-		reg-names = "core_physical";
-		reg = <0x04a00000 0x2f0>;
-		interrupts = <GIC_SPI 79 0>;
-		power-domains = <&mmcc MDSS_GDSC>;
-		clock-names =
-		    "core",
-		    "master_iface",
-		    "slave_iface";
-		clocks =
-		    <&mmcc HDMI_APP_CLK>,
-		    <&mmcc HDMI_M_AHB_CLK>,
-		    <&mmcc HDMI_S_AHB_CLK>;
-		qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>;
-		qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>;
-		qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
-		core-vdda-supply = <&pm8921_hdmi_mvs>;
-		hdmi-mux-supply = <&ext_3p3v>;
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&hpd_active  &ddc_active  &cec_active>;
-		pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>;
-
-		phys = <&hdmi_phy>;
-		phy-names = "hdmi_phy";
-	};
-
-	hdmi_phy: phy@4a00400 {
-		compatible = "qcom,hdmi-phy-8960";
-		reg-names = "hdmi_phy",
-			    "hdmi_pll";
-		reg = <0x4a00400 0x60>,
-		      <0x4a00500 0x100>;
-		#phy-cells = <0>;
-		power-domains = <&mmcc MDSS_GDSC>;
-		clock-names = "slave_iface";
-		clocks = <&mmcc HDMI_S_AHB_CLK>;
-		core-vdda-supply = <&pm8921_hdmi_mvs>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.yaml b/Documentation/devicetree/bindings/display/msm/hdmi.yaml
new file mode 100644
index 000000000000..ef425c649ead
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/hdmi.yaml
@@ -0,0 +1,230 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/display/msm/hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon HDMI output
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - qcom,hdmi-tx-8084
+      - qcom,hdmi-tx-8660
+      - qcom,hdmi-tx-8960
+      - qcom,hdmi-tx-8974
+      - qcom,hdmi-tx-8994
+      - qcom,hdmi-tx-8996
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: core_physical
+      - const: qfprom_physical
+      - const: hdcp_physical
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    enum:
+      - hdmi_phy
+      - hdmi-phy
+
+  core-vdda-supply:
+    description: phandle to VDDA supply regulator
+
+  hdmi-mux-supply:
+    description: phandle to mux regulator
+
+  core-vcc-supply:
+    description: phandle to VCC supply regulator
+
+  hpd-gpios:
+    maxItems: 1
+    description: hpd pin
+
+  qcom,hdmi-tx-mux-en-gpios:
+    maxItems: 1
+    description: HDMI mux enable pin
+
+  qcom,hdmi-tx-mux-sel-gpios:
+    maxItems: 1
+    description: HDMI mux select pin
+
+  qcom,hdmi-tx-mux-lpm-gpios:
+    maxItems: 1
+    description: HDMI mux lpm pin
+
+  '#sound-dai-cells':
+    const: 1
+
+  ports:
+    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: |
+          Output endpoints of the controller.
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - interrupts
+  - phys
+  - phy-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-tx-8960
+              - qcom,hdmi-tx-8660
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: core
+            - const: master_iface
+            - const: slave_iface
+        core-vcc-supplies: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-tx-8974
+              - qcom,hdmi-tx-8084
+              - qcom,hdmi-tx-8994
+              - qcom,hdmi-tx-8996
+    then:
+      properties:
+        clocks:
+          minItems: 5
+        clock-names:
+          items:
+            - const: mdp_core
+            - const: iface
+            - const: core
+            - const: alt_iface
+            - const: extp
+        hdmi-mux-supplies: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    hdmi: hdmi@4a00000 {
+      compatible = "qcom,hdmi-tx-8960";
+      reg-names = "core_physical";
+      reg = <0x04a00000 0x2f0>;
+      interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+      clock-names = "core",
+                    "master_iface",
+                    "slave_iface";
+      clocks = <&clk 61>,
+               <&clk 72>,
+               <&clk 98>;
+      hpd-gpios = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
+      core-vdda-supply = <&pm8921_hdmi_mvs>;
+      hdmi-mux-supply = <&ext_3p3v>;
+      pinctrl-names = "default", "sleep";
+      pinctrl-0 = <&hpd_active  &ddc_active  &cec_active>;
+      pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>;
+
+      phys = <&hdmi_phy>;
+      phy-names = "hdmi_phy";
+    };
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+    #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    hdmi@9a0000 {
+      compatible = "qcom,hdmi-tx-8996";
+      reg = <0x009a0000 0x50c>,
+            <0x00070000 0x6158>,
+            <0x009e0000 0xfff>;
+      reg-names = "core_physical",
+                  "qfprom_physical",
+                  "hdcp_physical";
+
+      interrupt-parent = <&mdss>;
+      interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&mmcc MDSS_MDP_CLK>,
+               <&mmcc MDSS_AHB_CLK>,
+               <&mmcc MDSS_HDMI_CLK>,
+               <&mmcc MDSS_HDMI_AHB_CLK>,
+               <&mmcc MDSS_EXTPCLK_CLK>;
+      clock-names = "mdp_core",
+                    "iface",
+                    "core",
+                    "alt_iface",
+                    "extp";
+
+      phys = <&hdmi_phy>;
+      phy-names = "hdmi_phy";
+      #sound-dai-cells = <1>;
+
+      pinctrl-names = "default", "sleep";
+      pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
+      pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
+
+      core-vdda-supply = <&vreg_l12a_1p8>;
+      core-vcc-supply = <&vreg_s4a_1p8>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+          endpoint {
+            remote-endpoint = <&mdp5_intf3_out>;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml
new file mode 100644
index 000000000000..3a6128d8f6fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/phy/qcom,hdmi-phy-other.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon HDMI phy
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - qcom,hdmi-phy-8660
+      - qcom,hdmi-phy-8960
+      - qcom,hdmi-phy-8974
+      - qcom,hdmi-phy-8084
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: hdmi_phy
+      - const: hdmi_pll
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  core-vdda-supply:
+    description: phandle to VDDA supply regulator
+  vddio-supply:
+    description: phandle to VDD I/O supply regulator
+
+  '#phy-cells':
+    const: 0
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-phy-8660
+              - qcom,hdmi-phy-8960
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: slave_iface
+        vddio-supply: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-phy-8084
+              - qcom,hdmi-phy-8974
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          items:
+            - const: iface
+            - const: alt_iface
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - reg-names
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    hdmi_phy: phy@4a00400 {
+      compatible = "qcom,hdmi-phy-8960";
+      reg-names = "hdmi_phy",
+                  "hdmi_pll";
+      reg = <0x4a00400 0x60>,
+            <0x4a00500 0x100>;
+      #phy-cells = <0>;
+      power-domains = <&mmcc 1>;
+      clock-names = "slave_iface";
+      clocks = <&clk 21>;
+      core-vdda-supply = <&pm8921_hdmi_mvs>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml
new file mode 100644
index 000000000000..3784e11bf2ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/phy/qcom,hdmi-phy-qmp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon QMP HDMI phy
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - qcom,hdmi-phy-8996
+
+  reg:
+    maxItems: 6
+
+  reg-names:
+    items:
+      - const: hdmi_pll
+      - const: hdmi_tx_l0
+      - const: hdmi_tx_l1
+      - const: hdmi_tx_l2
+      - const: hdmi_tx_l3
+      - const: hdmi_phy
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ref
+
+  power-domains:
+    maxItems: 1
+
+  vcca-supply: true
+
+  vddio-supply: true
+
+  '#phy-cells':
+    const: 0
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    hdmi-phy@9a0600 {
+      compatible = "qcom,hdmi-phy-8996";
+      reg = <0x009a0600 0x1c4>,
+            <0x009a0a00 0x124>,
+            <0x009a0c00 0x124>,
+            <0x009a0e00 0x124>,
+            <0x009a1000 0x124>,
+            <0x009a1200 0x0c8>;
+      reg-names = "hdmi_pll",
+                  "hdmi_tx_l0",
+                  "hdmi_tx_l1",
+                  "hdmi_tx_l2",
+                  "hdmi_tx_l3",
+                  "hdmi_phy";
+
+      clocks = <&mmcc 116>,
+               <&gcc 214>;
+      clock-names = "iface",
+                    "ref";
+      #phy-cells = <0>;
+
+      vddio-supply = <&vreg_l12a_1p8>;
+      vcca-supply = <&vreg_l28a_0p925>;
+    };
-- 
2.35.1

Re: [PATCH v2 01/12] dt-bindings: display/msm: hdmi: split and convert to yaml

[Krzysztof Kozlowski]

On 08/06/2022 14:07, Dmitry Baryshkov wrote:
> Convert Qualcomm HDMI binding into HDMI TX and PHY yaml bindings.
> 
> Changes to schema:
> HDMI:
>  - fixed reg-names numbering to match 0..3 instead 0,1,3,4
>  - dropped qcom,tx-ddc-* from example, they were not documented
> 
> PHY:
>  - moved into phy/ directory
>  - split into QMP and non-QMP PHY schemas
> 
> Co-developed-by: David Heidelberg <david@ixit.cz>

David also needs to SoB here.

> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

(...)

> +$id: http://devicetree.org/schemas/display/msm/hdmi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Adreno/Snapdragon HDMI output
> +
> +maintainers:
> +  - Rob Clark <robdclark@gmail.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,hdmi-tx-8084
> +      - qcom,hdmi-tx-8660
> +      - qcom,hdmi-tx-8960
> +      - qcom,hdmi-tx-8974
> +      - qcom,hdmi-tx-8994
> +      - qcom,hdmi-tx-8996
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 5
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 5
> +
> +  reg:
> +    minItems: 1
> +    maxItems: 3
> +
> +  reg-names:
> +    minItems: 1
> +    items:
> +      - const: core_physical
> +      - const: qfprom_physical
> +      - const: hdcp_physical
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  phys:
> +    maxItems: 1
> +
> +  phy-names:
> +    enum:
> +      - hdmi_phy
> +      - hdmi-phy

I did not notice your question on v1. I see now two DTS files using two
different names... yeah, let's mark it deprecated and remove entirely
from DTS. Let's hope DTS does not have other users than Linux kernel. :)

> +
> +  core-vdda-supply:
> +    description: phandle to VDDA supply regulator
> +
> +  hdmi-mux-supply:
> +    description: phandle to mux regulator
> +
> +  core-vcc-supply:
> +    description: phandle to VCC supply regulator
> +

(...)

> +properties:
> +  compatible:
> +    enum:
> +      - qcom,hdmi-phy-8660
> +      - qcom,hdmi-phy-8960
> +      - qcom,hdmi-phy-8974
> +      - qcom,hdmi-phy-8084
> +
> +  reg:
> +    maxItems: 2
> +
> +  reg-names:
> +    items:
> +      - const: hdmi_phy
> +      - const: hdmi_pll
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 2
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 2
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  core-vdda-supply:
> +    description: phandle to VDDA supply regulator

Blank line

> +  vddio-supply:
> +    description: phandle to VDD I/O supply regulator
> +


Best regards,
Krzysztof

Re: [PATCH v2 01/12] dt-bindings: display/msm: hdmi: split and convert to yaml

[Krzysztof Kozlowski]

On 08/06/2022 14:07, Dmitry Baryshkov wrote:
> Convert Qualcomm HDMI binding into HDMI TX and PHY yaml bindings.
> 
> Changes to schema:
> HDMI:
>  - fixed reg-names numbering to match 0..3 instead 0,1,3,4
>  - dropped qcom,tx-ddc-* from example, they were not documented
> 
> PHY:
>  - moved into phy/ directory
>  - split into QMP and non-QMP PHY schemas
> 
> Co-developed-by: David Heidelberg <david@ixit.cz>

David also needs to SoB here.

> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

(...)

> +$id: http://devicetree.org/schemas/display/msm/hdmi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Adreno/Snapdragon HDMI output
> +
> +maintainers:
> +  - Rob Clark <robdclark@gmail.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,hdmi-tx-8084
> +      - qcom,hdmi-tx-8660
> +      - qcom,hdmi-tx-8960
> +      - qcom,hdmi-tx-8974
> +      - qcom,hdmi-tx-8994
> +      - qcom,hdmi-tx-8996
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 5
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 5
> +
> +  reg:
> +    minItems: 1
> +    maxItems: 3
> +
> +  reg-names:
> +    minItems: 1
> +    items:
> +      - const: core_physical
> +      - const: qfprom_physical
> +      - const: hdcp_physical
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  phys:
> +    maxItems: 1
> +
> +  phy-names:
> +    enum:
> +      - hdmi_phy
> +      - hdmi-phy

I did not notice your question on v1. I see now two DTS files using two
different names... yeah, let's mark it deprecated and remove entirely
from DTS. Let's hope DTS does not have other users than Linux kernel. :)

> +
> +  core-vdda-supply:
> +    description: phandle to VDDA supply regulator
> +
> +  hdmi-mux-supply:
> +    description: phandle to mux regulator
> +
> +  core-vcc-supply:
> +    description: phandle to VCC supply regulator
> +

(...)

> +properties:
> +  compatible:
> +    enum:
> +      - qcom,hdmi-phy-8660
> +      - qcom,hdmi-phy-8960
> +      - qcom,hdmi-phy-8974
> +      - qcom,hdmi-phy-8084
> +
> +  reg:
> +    maxItems: 2
> +
> +  reg-names:
> +    items:
> +      - const: hdmi_phy
> +      - const: hdmi_pll
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 2
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 2
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  core-vdda-supply:
> +    description: phandle to VDDA supply regulator

Blank line

> +  vddio-supply:
> +    description: phandle to VDD I/O supply regulator
> +


Best regards,
Krzysztof

Re: [PATCH v2 01/12] dt-bindings: display/msm: hdmi: split and convert to yaml

[David Heidelberg]

[-- Attachment #1.1.1: Type: text/plain, Size: 3045 bytes --]

On 08/06/2022 14:37, Krzysztof Kozlowski wrote:
> On 08/06/2022 14:07, Dmitry Baryshkov wrote:
>> Convert Qualcomm HDMI binding into HDMI TX and PHY yaml bindings.
>>
>> Changes to schema:
>> HDMI:
>>   - fixed reg-names numbering to match 0..3 instead 0,1,3,4
>>   - dropped qcom,tx-ddc-* from example, they were not documented
>>
>> PHY:
>>   - moved into phy/ directory
>>   - split into QMP and non-QMP PHY schemas
>>
>> Co-developed-by: David Heidelberg <david@ixit.cz>
> David also needs to SoB here.

no problem, for this or any later version of patches developed by me:

Signed-off-by: David Heidelberg <david@ixit.cz>

>
>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>> ---
> (...)
>
>> +$id: http://devicetree.org/schemas/display/msm/hdmi.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm Adreno/Snapdragon HDMI output
>> +
>> +maintainers:
>> +  - Rob Clark <robdclark@gmail.com>
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - qcom,hdmi-tx-8084
>> +      - qcom,hdmi-tx-8660
>> +      - qcom,hdmi-tx-8960
>> +      - qcom,hdmi-tx-8974
>> +      - qcom,hdmi-tx-8994
>> +      - qcom,hdmi-tx-8996
>> +
>> +  clocks:
>> +    minItems: 1
>> +    maxItems: 5
>> +
>> +  clock-names:
>> +    minItems: 1
>> +    maxItems: 5
>> +
>> +  reg:
>> +    minItems: 1
>> +    maxItems: 3
>> +
>> +  reg-names:
>> +    minItems: 1
>> +    items:
>> +      - const: core_physical
>> +      - const: qfprom_physical
>> +      - const: hdcp_physical
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  phys:
>> +    maxItems: 1
>> +
>> +  phy-names:
>> +    enum:
>> +      - hdmi_phy
>> +      - hdmi-phy
> I did not notice your question on v1. I see now two DTS files using two
> different names... yeah, let's mark it deprecated and remove entirely
> from DTS. Let's hope DTS does not have other users than Linux kernel. :)
>
>> +
>> +  core-vdda-supply:
>> +    description: phandle to VDDA supply regulator
>> +
>> +  hdmi-mux-supply:
>> +    description: phandle to mux regulator
>> +
>> +  core-vcc-supply:
>> +    description: phandle to VCC supply regulator
>> +
> (...)
>
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - qcom,hdmi-phy-8660
>> +      - qcom,hdmi-phy-8960
>> +      - qcom,hdmi-phy-8974
>> +      - qcom,hdmi-phy-8084
>> +
>> +  reg:
>> +    maxItems: 2
>> +
>> +  reg-names:
>> +    items:
>> +      - const: hdmi_phy
>> +      - const: hdmi_pll
>> +
>> +  clocks:
>> +    minItems: 1
>> +    maxItems: 2
>> +
>> +  clock-names:
>> +    minItems: 1
>> +    maxItems: 2
>> +
>> +  power-domains:
>> +    maxItems: 1
>> +
>> +  core-vdda-supply:
>> +    description: phandle to VDDA supply regulator
> Blank line
>
>> +  vddio-supply:
>> +    description: phandle to VDD I/O supply regulator
>> +
>
> Best regards,
> Krzysztof

-- 
David Heidelberg
Consultant Software Engineer

Matrix: @okias:matrix.org


[-- Attachment #1.1.2: OpenPGP public key --]
[-- Type: application/pgp-keys, Size: 3977 bytes --]

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v2 01/12] dt-bindings: display/msm: hdmi: split and convert to yaml

[David Heidelberg]

[-- Attachment #1.1.1: Type: text/plain, Size: 3045 bytes --]

On 08/06/2022 14:37, Krzysztof Kozlowski wrote:
> On 08/06/2022 14:07, Dmitry Baryshkov wrote:
>> Convert Qualcomm HDMI binding into HDMI TX and PHY yaml bindings.
>>
>> Changes to schema:
>> HDMI:
>>   - fixed reg-names numbering to match 0..3 instead 0,1,3,4
>>   - dropped qcom,tx-ddc-* from example, they were not documented
>>
>> PHY:
>>   - moved into phy/ directory
>>   - split into QMP and non-QMP PHY schemas
>>
>> Co-developed-by: David Heidelberg <david@ixit.cz>
> David also needs to SoB here.

no problem, for this or any later version of patches developed by me:

Signed-off-by: David Heidelberg <david@ixit.cz>

>
>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>> ---
> (...)
>
>> +$id: http://devicetree.org/schemas/display/msm/hdmi.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm Adreno/Snapdragon HDMI output
>> +
>> +maintainers:
>> +  - Rob Clark <robdclark@gmail.com>
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - qcom,hdmi-tx-8084
>> +      - qcom,hdmi-tx-8660
>> +      - qcom,hdmi-tx-8960
>> +      - qcom,hdmi-tx-8974
>> +      - qcom,hdmi-tx-8994
>> +      - qcom,hdmi-tx-8996
>> +
>> +  clocks:
>> +    minItems: 1
>> +    maxItems: 5
>> +
>> +  clock-names:
>> +    minItems: 1
>> +    maxItems: 5
>> +
>> +  reg:
>> +    minItems: 1
>> +    maxItems: 3
>> +
>> +  reg-names:
>> +    minItems: 1
>> +    items:
>> +      - const: core_physical
>> +      - const: qfprom_physical
>> +      - const: hdcp_physical
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  phys:
>> +    maxItems: 1
>> +
>> +  phy-names:
>> +    enum:
>> +      - hdmi_phy
>> +      - hdmi-phy
> I did not notice your question on v1. I see now two DTS files using two
> different names... yeah, let's mark it deprecated and remove entirely
> from DTS. Let's hope DTS does not have other users than Linux kernel. :)
>
>> +
>> +  core-vdda-supply:
>> +    description: phandle to VDDA supply regulator
>> +
>> +  hdmi-mux-supply:
>> +    description: phandle to mux regulator
>> +
>> +  core-vcc-supply:
>> +    description: phandle to VCC supply regulator
>> +
> (...)
>
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - qcom,hdmi-phy-8660
>> +      - qcom,hdmi-phy-8960
>> +      - qcom,hdmi-phy-8974
>> +      - qcom,hdmi-phy-8084
>> +
>> +  reg:
>> +    maxItems: 2
>> +
>> +  reg-names:
>> +    items:
>> +      - const: hdmi_phy
>> +      - const: hdmi_pll
>> +
>> +  clocks:
>> +    minItems: 1
>> +    maxItems: 2
>> +
>> +  clock-names:
>> +    minItems: 1
>> +    maxItems: 2
>> +
>> +  power-domains:
>> +    maxItems: 1
>> +
>> +  core-vdda-supply:
>> +    description: phandle to VDDA supply regulator
> Blank line
>
>> +  vddio-supply:
>> +    description: phandle to VDD I/O supply regulator
>> +
>
> Best regards,
> Krzysztof

-- 
David Heidelberg
Consultant Software Engineer

Matrix: @okias:matrix.org


[-- Attachment #1.1.2: OpenPGP public key --]
[-- Type: application/pgp-keys, Size: 3977 bytes --]

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v2 01/12] dt-bindings: display/msm: hdmi: split and convert to yaml

[Dmitry Baryshkov]

On 09/06/2022 01:45, David Heidelberg wrote:
> On 08/06/2022 14:37, Krzysztof Kozlowski wrote:
>> On 08/06/2022 14:07, Dmitry Baryshkov wrote:
>>> Convert Qualcomm HDMI binding into HDMI TX and PHY yaml bindings.
>>>
>>> Changes to schema:
>>> HDMI:
>>>   - fixed reg-names numbering to match 0..3 instead 0,1,3,4
>>>   - dropped qcom,tx-ddc-* from example, they were not documented
>>>
>>> PHY:
>>>   - moved into phy/ directory
>>>   - split into QMP and non-QMP PHY schemas
>>>
>>> Co-developed-by: David Heidelberg <david@ixit.cz>
>> David also needs to SoB here.
> 
> no problem, for this or any later version of patches developed by me:
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>

Thanks!

-- 
With best wishes
Dmitry

Re: [PATCH v2 01/12] dt-bindings: display/msm: hdmi: split and convert to yaml

[Dmitry Baryshkov]

On 09/06/2022 01:45, David Heidelberg wrote:
> On 08/06/2022 14:37, Krzysztof Kozlowski wrote:
>> On 08/06/2022 14:07, Dmitry Baryshkov wrote:
>>> Convert Qualcomm HDMI binding into HDMI TX and PHY yaml bindings.
>>>
>>> Changes to schema:
>>> HDMI:
>>>   - fixed reg-names numbering to match 0..3 instead 0,1,3,4
>>>   - dropped qcom,tx-ddc-* from example, they were not documented
>>>
>>> PHY:
>>>   - moved into phy/ directory
>>>   - split into QMP and non-QMP PHY schemas
>>>
>>> Co-developed-by: David Heidelberg <david@ixit.cz>
>> David also needs to SoB here.
> 
> no problem, for this or any later version of patches developed by me:
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>

Thanks!

-- 
With best wishes
Dmitry

Re: [PATCH v2 01/12] dt-bindings: display/msm: hdmi: split and convert to yaml

[Dmitry Baryshkov]

On 08/06/2022 15:37, Krzysztof Kozlowski wrote:
> On 08/06/2022 14:07, Dmitry Baryshkov wrote:
>> Convert Qualcomm HDMI binding into HDMI TX and PHY yaml bindings.
>>
>> Changes to schema:
>> HDMI:
>>   - fixed reg-names numbering to match 0..3 instead 0,1,3,4
>>   - dropped qcom,tx-ddc-* from example, they were not documented
>>
>> PHY:
>>   - moved into phy/ directory
>>   - split into QMP and non-QMP PHY schemas
>>
>> Co-developed-by: David Heidelberg <david@ixit.cz>
> 
> David also needs to SoB here.

Thank you for the review and for the comments.

-- 
With best wishes
Dmitry

Re: [PATCH v2 01/12] dt-bindings: display/msm: hdmi: split and convert to yaml

[Dmitry Baryshkov]

On 08/06/2022 15:37, Krzysztof Kozlowski wrote:
> On 08/06/2022 14:07, Dmitry Baryshkov wrote:
>> Convert Qualcomm HDMI binding into HDMI TX and PHY yaml bindings.
>>
>> Changes to schema:
>> HDMI:
>>   - fixed reg-names numbering to match 0..3 instead 0,1,3,4
>>   - dropped qcom,tx-ddc-* from example, they were not documented
>>
>> PHY:
>>   - moved into phy/ directory
>>   - split into QMP and non-QMP PHY schemas
>>
>> Co-developed-by: David Heidelberg <david@ixit.cz>
> 
> David also needs to SoB here.

Thank you for the review and for the comments.

-- 
With best wishes
Dmitry

[PATCH v2 02/12] dt-bindings: display/msm: hdmi: mark old GPIO properties as deprecated

[Dmitry Baryshkov]

Mark obsolete GPIO properties as deprecated. They are not used by
existing device trees. While we are at it, also drop them from the
schema example.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 Documentation/devicetree/bindings/display/msm/hdmi.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.yaml b/Documentation/devicetree/bindings/display/msm/hdmi.yaml
index ef425c649ead..81997759584c 100644
--- a/Documentation/devicetree/bindings/display/msm/hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/msm/hdmi.yaml
@@ -65,14 +65,17 @@ properties:
 
   qcom,hdmi-tx-mux-en-gpios:
     maxItems: 1
+    deprecated: true
     description: HDMI mux enable pin
 
   qcom,hdmi-tx-mux-sel-gpios:
     maxItems: 1
+    deprecated: true
     description: HDMI mux select pin
 
   qcom,hdmi-tx-mux-lpm-gpios:
     maxItems: 1
+    deprecated: true
     description: HDMI mux lpm pin
 
   '#sound-dai-cells':
-- 
2.35.1

[PATCH v2 02/12] dt-bindings: display/msm: hdmi: mark old GPIO properties as deprecated

[Dmitry Baryshkov]

Mark obsolete GPIO properties as deprecated. They are not used by
existing device trees. While we are at it, also drop them from the
schema example.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 Documentation/devicetree/bindings/display/msm/hdmi.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.yaml b/Documentation/devicetree/bindings/display/msm/hdmi.yaml
index ef425c649ead..81997759584c 100644
--- a/Documentation/devicetree/bindings/display/msm/hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/msm/hdmi.yaml
@@ -65,14 +65,17 @@ properties:
 
   qcom,hdmi-tx-mux-en-gpios:
     maxItems: 1
+    deprecated: true
     description: HDMI mux enable pin
 
   qcom,hdmi-tx-mux-sel-gpios:
     maxItems: 1
+    deprecated: true
     description: HDMI mux select pin
 
   qcom,hdmi-tx-mux-lpm-gpios:
     maxItems: 1
+    deprecated: true
     description: HDMI mux lpm pin
 
   '#sound-dai-cells':
-- 
2.35.1

Re: [PATCH v2 02/12] dt-bindings: display/msm: hdmi: mark old GPIO properties as deprecated

[Krzysztof Kozlowski]

On 08/06/2022 14:07, Dmitry Baryshkov wrote:
> Mark obsolete GPIO properties as deprecated. They are not used by
> existing device trees. While we are at it, also drop them from the
> schema example.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

Re: [PATCH v2 02/12] dt-bindings: display/msm: hdmi: mark old GPIO properties as deprecated

[Krzysztof Kozlowski]

On 08/06/2022 14:07, Dmitry Baryshkov wrote:
> Mark obsolete GPIO properties as deprecated. They are not used by
> existing device trees. While we are at it, also drop them from the
> schema example.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

Re: [PATCH v2 02/12] dt-bindings: display/msm: hdmi: mark old GPIO properties as deprecated

[Stephen Boyd]

Quoting Dmitry Baryshkov (2022-06-08 05:07:13)
> Mark obsolete GPIO properties as deprecated. They are not used by
> existing device trees. While we are at it, also drop them from the
> schema example.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Re: [PATCH v2 02/12] dt-bindings: display/msm: hdmi: mark old GPIO properties as deprecated

[Stephen Boyd]

Quoting Dmitry Baryshkov (2022-06-08 05:07:13)
> Mark obsolete GPIO properties as deprecated. They are not used by
> existing device trees. While we are at it, also drop them from the
> schema example.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

[PATCH v2 03/12] dt-bindings: display/msm: hdmi: mark hdmi-mux-supply as deprecated

[Dmitry Baryshkov]

hdmi-mux-supply is not used by the SoC's HDMI block, it is thought to
power up the external logic. Thus it should not be a part of HDMI
bindings, but it should be declared at some other device in the DT (like
HDMI mux, bridge, etc). Mark it as deprecated.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 Documentation/devicetree/bindings/display/msm/hdmi.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.yaml b/Documentation/devicetree/bindings/display/msm/hdmi.yaml
index 81997759584c..3f703d737ca7 100644
--- a/Documentation/devicetree/bindings/display/msm/hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/msm/hdmi.yaml
@@ -55,6 +55,7 @@ properties:
 
   hdmi-mux-supply:
     description: phandle to mux regulator
+    deprecated: true
 
   core-vcc-supply:
     description: phandle to VCC supply regulator
-- 
2.35.1

[PATCH v2 03/12] dt-bindings: display/msm: hdmi: mark hdmi-mux-supply as deprecated

[Dmitry Baryshkov]

hdmi-mux-supply is not used by the SoC's HDMI block, it is thought to
power up the external logic. Thus it should not be a part of HDMI
bindings, but it should be declared at some other device in the DT (like
HDMI mux, bridge, etc). Mark it as deprecated.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 Documentation/devicetree/bindings/display/msm/hdmi.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.yaml b/Documentation/devicetree/bindings/display/msm/hdmi.yaml
index 81997759584c..3f703d737ca7 100644
--- a/Documentation/devicetree/bindings/display/msm/hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/msm/hdmi.yaml
@@ -55,6 +55,7 @@ properties:
 
   hdmi-mux-supply:
     description: phandle to mux regulator
+    deprecated: true
 
   core-vcc-supply:
     description: phandle to VCC supply regulator
-- 
2.35.1

Re: [PATCH v2 03/12] dt-bindings: display/msm: hdmi: mark hdmi-mux-supply as deprecated

[Krzysztof Kozlowski]

On 08/06/2022 14:07, Dmitry Baryshkov wrote:
> hdmi-mux-supply is not used by the SoC's HDMI block, it is thought to
> power up the external logic. Thus it should not be a part of HDMI
> bindings, but it should be declared at some other device in the DT (like
> HDMI mux, bridge, etc). Mark it as deprecated.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

Re: [PATCH v2 03/12] dt-bindings: display/msm: hdmi: mark hdmi-mux-supply as deprecated

[Krzysztof Kozlowski]

On 08/06/2022 14:07, Dmitry Baryshkov wrote:
> hdmi-mux-supply is not used by the SoC's HDMI block, it is thought to
> power up the external logic. Thus it should not be a part of HDMI
> bindings, but it should be declared at some other device in the DT (like
> HDMI mux, bridge, etc). Mark it as deprecated.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

Re: [PATCH v2 03/12] dt-bindings: display/msm: hdmi: mark hdmi-mux-supply as deprecated

[Stephen Boyd]

Quoting Dmitry Baryshkov (2022-06-08 05:07:14)
> hdmi-mux-supply is not used by the SoC's HDMI block, it is thought to
> power up the external logic. Thus it should not be a part of HDMI
> bindings, but it should be declared at some other device in the DT (like
> HDMI mux, bridge, etc). Mark it as deprecated.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Re: [PATCH v2 03/12] dt-bindings: display/msm: hdmi: mark hdmi-mux-supply as deprecated

[Stephen Boyd]

Quoting Dmitry Baryshkov (2022-06-08 05:07:14)
> hdmi-mux-supply is not used by the SoC's HDMI block, it is thought to
> power up the external logic. Thus it should not be a part of HDMI
> bindings, but it should be declared at some other device in the DT (like
> HDMI mux, bridge, etc). Mark it as deprecated.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

[PATCH v2 04/12] arm: dts: qcom: apq8064-ifc6410: drop hdmi-mux-supply

[Dmitry Baryshkov]

The HDMI circuitry on the IFC6410 is not powered by the 3v3. Drop the
hdmi-mux-supply property.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 2638b380be20..eb6b1a1ff117 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -341,7 +341,6 @@ hdmi-tx@4a00000 {
 			status = "okay";
 
 			core-vdda-supply = <&pm8921_hdmi_switch>;
-			hdmi-mux-supply = <&ext_3p3v>;
 
 			hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
 
-- 
2.35.1

[PATCH v2 04/12] arm: dts: qcom: apq8064-ifc6410: drop hdmi-mux-supply

[Dmitry Baryshkov]

The HDMI circuitry on the IFC6410 is not powered by the 3v3. Drop the
hdmi-mux-supply property.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 2638b380be20..eb6b1a1ff117 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -341,7 +341,6 @@ hdmi-tx@4a00000 {
 			status = "okay";
 
 			core-vdda-supply = <&pm8921_hdmi_switch>;
-			hdmi-mux-supply = <&ext_3p3v>;
 
 			hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
 
-- 
2.35.1

Re: [PATCH v2 04/12] arm: dts: qcom: apq8064-ifc6410: drop hdmi-mux-supply

[Stephen Boyd]

Quoting Dmitry Baryshkov (2022-06-08 05:07:15)
> The HDMI circuitry on the IFC6410 is not powered by the 3v3. Drop the
> hdmi-mux-supply property.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Re: [PATCH v2 04/12] arm: dts: qcom: apq8064-ifc6410: drop hdmi-mux-supply

[Stephen Boyd]

Quoting Dmitry Baryshkov (2022-06-08 05:07:15)
> The HDMI circuitry on the IFC6410 is not powered by the 3v3. Drop the
> hdmi-mux-supply property.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

[PATCH v2 05/12] drm/msm/hdmi: drop the hdmi-mux support

[Dmitry Baryshkov]

With the last (and only) in-kernel user of hdmi-mux regulator, drop it
from the HDMI driver.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index cf24e68864ba..06b44b40ec09 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -358,7 +358,7 @@ static const char *hpd_reg_names_none[] = {};
 
 static struct hdmi_platform_config hdmi_tx_8660_config;
 
-static const char *hpd_reg_names_8960[] = {"core-vdda", "hdmi-mux"};
+static const char *hpd_reg_names_8960[] = {"core-vdda"};
 static const char *hpd_clk_names_8960[] = {"core", "master_iface", "slave_iface"};
 
 static struct hdmi_platform_config hdmi_tx_8960_config = {
-- 
2.35.1

[PATCH v2 05/12] drm/msm/hdmi: drop the hdmi-mux support

[Dmitry Baryshkov]

With the last (and only) in-kernel user of hdmi-mux regulator, drop it
from the HDMI driver.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index cf24e68864ba..06b44b40ec09 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -358,7 +358,7 @@ static const char *hpd_reg_names_none[] = {};
 
 static struct hdmi_platform_config hdmi_tx_8660_config;
 
-static const char *hpd_reg_names_8960[] = {"core-vdda", "hdmi-mux"};
+static const char *hpd_reg_names_8960[] = {"core-vdda"};
 static const char *hpd_clk_names_8960[] = {"core", "master_iface", "slave_iface"};
 
 static struct hdmi_platform_config hdmi_tx_8960_config = {
-- 
2.35.1

Re: [PATCH v2 05/12] drm/msm/hdmi: drop the hdmi-mux support

[Stephen Boyd]

Quoting Dmitry Baryshkov (2022-06-08 05:07:16)
> With the last (and only) in-kernel user of hdmi-mux regulator, drop it
> from the HDMI driver.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Re: [PATCH v2 05/12] drm/msm/hdmi: drop the hdmi-mux support

[Stephen Boyd]

Quoting Dmitry Baryshkov (2022-06-08 05:07:16)
> With the last (and only) in-kernel user of hdmi-mux regulator, drop it
> from the HDMI driver.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

[PATCH v2 06/12] drm/msm/hdmi: drop unused GPIO support

[Dmitry Baryshkov]

The HDMI driver has code to configure extra GPIOs, which predates
pinctrl support. Nowadays all platforms should use pinctrl instead.
Neither of upstreamed Qualcomm pltforms uses these properties, so it's
safe to drop them.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi.c     | 61 +++++-----------------------
 drivers/gpu/drm/msm/hdmi/hdmi.h     | 13 +-----
 drivers/gpu/drm/msm/hdmi/hdmi_hpd.c | 62 ++---------------------------
 3 files changed, 17 insertions(+), 119 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index 06b44b40ec09..7cb687458a56 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -406,20 +406,6 @@ static struct hdmi_platform_config hdmi_tx_8996_config = {
 		.hpd_freq      = hpd_clk_freq_8x74,
 };
 
-static const struct {
-	const char *name;
-	const bool output;
-	const int value;
-	const char *label;
-} msm_hdmi_gpio_pdata[] = {
-	{ "qcom,hdmi-tx-ddc-clk", true, 1, "HDMI_DDC_CLK" },
-	{ "qcom,hdmi-tx-ddc-data", true, 1, "HDMI_DDC_DATA" },
-	{ "qcom,hdmi-tx-hpd", false, 1, "HDMI_HPD" },
-	{ "qcom,hdmi-tx-mux-en", true, 1, "HDMI_MUX_EN" },
-	{ "qcom,hdmi-tx-mux-sel", true, 0, "HDMI_MUX_SEL" },
-	{ "qcom,hdmi-tx-mux-lpm", true, 1, "HDMI_MUX_LPM" },
-};
-
 /*
  * HDMI audio codec callbacks
  */
@@ -531,7 +517,7 @@ static int msm_hdmi_bind(struct device *dev, struct device *master, void *data)
 	struct hdmi_platform_config *hdmi_cfg;
 	struct hdmi *hdmi;
 	struct device_node *of_node = dev->of_node;
-	int i, err;
+	int err;
 
 	hdmi_cfg = (struct hdmi_platform_config *)
 			of_device_get_match_data(dev);
@@ -543,41 +529,16 @@ static int msm_hdmi_bind(struct device *dev, struct device *master, void *data)
 	hdmi_cfg->mmio_name     = "core_physical";
 	hdmi_cfg->qfprom_mmio_name = "qfprom_physical";
 
-	for (i = 0; i < HDMI_MAX_NUM_GPIO; i++) {
-		const char *name = msm_hdmi_gpio_pdata[i].name;
-		struct gpio_desc *gpiod;
-
-		/*
-		 * We are fetching the GPIO lines "as is" since the connector
-		 * code is enabling and disabling the lines. Until that point
-		 * the power-on default value will be kept.
-		 */
-		gpiod = devm_gpiod_get_optional(dev, name, GPIOD_ASIS);
-		/* This will catch e.g. -PROBE_DEFER */
-		if (IS_ERR(gpiod))
-			return PTR_ERR(gpiod);
-		if (!gpiod) {
-			/* Try a second time, stripping down the name */
-			char name3[32];
-
-			/*
-			 * Try again after stripping out the "qcom,hdmi-tx"
-			 * prefix. This is mainly to match "hpd-gpios" used
-			 * in the upstream bindings.
-			 */
-			if (sscanf(name, "qcom,hdmi-tx-%s", name3))
-				gpiod = devm_gpiod_get_optional(dev, name3, GPIOD_ASIS);
-			if (IS_ERR(gpiod))
-				return PTR_ERR(gpiod);
-			if (!gpiod)
-				DBG("failed to get gpio: %s", name);
-		}
-		hdmi_cfg->gpios[i].gpiod = gpiod;
-		if (gpiod)
-			gpiod_set_consumer_name(gpiod, msm_hdmi_gpio_pdata[i].label);
-		hdmi_cfg->gpios[i].output = msm_hdmi_gpio_pdata[i].output;
-		hdmi_cfg->gpios[i].value = msm_hdmi_gpio_pdata[i].value;
-	}
+	hdmi->hpd_gpiod = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
+	/* This will catch e.g. -PROBE_DEFER */
+	if (IS_ERR(hdmi->hpd_gpiod))
+		return PTR_ERR(hdmi->hpd_gpiod);
+
+	if (!hdmi->hpd_gpiod)
+		DBG("failed to get HPD gpio");
+
+	if (hdmi->hpd_gpiod)
+		gpiod_set_consumer_name(hdmi->hpd_gpiod, "HDMI_HPD");
 
 	dev->platform_data = hdmi_cfg;
 
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h
index 736f348befb3..a6c88d157bc3 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.h
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
@@ -19,17 +19,9 @@
 #include "msm_drv.h"
 #include "hdmi.xml.h"
 
-#define HDMI_MAX_NUM_GPIO	6
-
 struct hdmi_phy;
 struct hdmi_platform_config;
 
-struct hdmi_gpio_data {
-	struct gpio_desc *gpiod;
-	bool output;
-	int value;
-};
-
 struct hdmi_audio {
 	bool enabled;
 	struct hdmi_audio_infoframe infoframe;
@@ -61,6 +53,8 @@ struct hdmi {
 	struct clk **hpd_clks;
 	struct clk **pwr_clks;
 
+	struct gpio_desc *hpd_gpiod;
+
 	struct hdmi_phy *phy;
 	struct device *phy_dev;
 
@@ -109,9 +103,6 @@ struct hdmi_platform_config {
 	/* clks that need to be on for screen pwr (ie pixel clk): */
 	const char **pwr_clk_names;
 	int pwr_clk_cnt;
-
-	/* gpio's: */
-	struct hdmi_gpio_data gpios[HDMI_MAX_NUM_GPIO];
 };
 
 struct hdmi_bridge {
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c b/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
index 75605ddac7c4..bfa827b47989 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
@@ -60,48 +60,6 @@ static void msm_hdmi_phy_reset(struct hdmi *hdmi)
 	}
 }
 
-static int gpio_config(struct hdmi *hdmi, bool on)
-{
-	const struct hdmi_platform_config *config = hdmi->config;
-	int i;
-
-	if (on) {
-		for (i = 0; i < HDMI_MAX_NUM_GPIO; i++) {
-			struct hdmi_gpio_data gpio = config->gpios[i];
-
-			if (gpio.gpiod) {
-				if (gpio.output) {
-					gpiod_direction_output(gpio.gpiod,
-							       gpio.value);
-				} else {
-					gpiod_direction_input(gpio.gpiod);
-					gpiod_set_value_cansleep(gpio.gpiod,
-								 gpio.value);
-				}
-			}
-		}
-
-		DBG("gpio on");
-	} else {
-		for (i = 0; i < HDMI_MAX_NUM_GPIO; i++) {
-			struct hdmi_gpio_data gpio = config->gpios[i];
-
-			if (!gpio.gpiod)
-				continue;
-
-			if (gpio.output) {
-				int value = gpio.value ? 0 : 1;
-
-				gpiod_set_value_cansleep(gpio.gpiod, value);
-			}
-		}
-
-		DBG("gpio off");
-	}
-
-	return 0;
-}
-
 static void enable_hpd_clocks(struct hdmi *hdmi, bool enable)
 {
 	const struct hdmi_platform_config *config = hdmi->config;
@@ -154,11 +112,8 @@ int msm_hdmi_hpd_enable(struct drm_bridge *bridge)
 		goto fail;
 	}
 
-	ret = gpio_config(hdmi, true);
-	if (ret) {
-		DRM_DEV_ERROR(dev, "failed to configure GPIOs: %d\n", ret);
-		goto fail;
-	}
+	if (hdmi->hpd_gpiod)
+		gpiod_set_value_cansleep(hdmi->hpd_gpiod, 1);
 
 	pm_runtime_get_sync(dev);
 	enable_hpd_clocks(hdmi, true);
@@ -207,10 +162,6 @@ void msm_hdmi_hpd_disable(struct hdmi_bridge *hdmi_bridge)
 	enable_hpd_clocks(hdmi, false);
 	pm_runtime_put(dev);
 
-	ret = gpio_config(hdmi, false);
-	if (ret)
-		dev_warn(dev, "failed to unconfigure GPIOs: %d\n", ret);
-
 	ret = pinctrl_pm_select_sleep_state(dev);
 	if (ret)
 		dev_warn(dev, "pinctrl state chg failed: %d\n", ret);
@@ -269,10 +220,7 @@ static enum drm_connector_status detect_reg(struct hdmi *hdmi)
 #define HPD_GPIO_INDEX	2
 static enum drm_connector_status detect_gpio(struct hdmi *hdmi)
 {
-	const struct hdmi_platform_config *config = hdmi->config;
-	struct hdmi_gpio_data hpd_gpio = config->gpios[HPD_GPIO_INDEX];
-
-	return gpiod_get_value(hpd_gpio.gpiod) ?
+	return gpiod_get_value(hdmi->hpd_gpiod) ?
 			connector_status_connected :
 			connector_status_disconnected;
 }
@@ -282,8 +230,6 @@ enum drm_connector_status msm_hdmi_bridge_detect(
 {
 	struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
 	struct hdmi *hdmi = hdmi_bridge->hdmi;
-	const struct hdmi_platform_config *config = hdmi->config;
-	struct hdmi_gpio_data hpd_gpio = config->gpios[HPD_GPIO_INDEX];
 	enum drm_connector_status stat_gpio, stat_reg;
 	int retry = 20;
 
@@ -291,7 +237,7 @@ enum drm_connector_status msm_hdmi_bridge_detect(
 	 * some platforms may not have hpd gpio. Rely only on the status
 	 * provided by REG_HDMI_HPD_INT_STATUS in this case.
 	 */
-	if (!hpd_gpio.gpiod)
+	if (!hdmi->hpd_gpiod)
 		return detect_reg(hdmi);
 
 	do {
-- 
2.35.1

[PATCH v2 06/12] drm/msm/hdmi: drop unused GPIO support

[Dmitry Baryshkov]

The HDMI driver has code to configure extra GPIOs, which predates
pinctrl support. Nowadays all platforms should use pinctrl instead.
Neither of upstreamed Qualcomm pltforms uses these properties, so it's
safe to drop them.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi.c     | 61 +++++-----------------------
 drivers/gpu/drm/msm/hdmi/hdmi.h     | 13 +-----
 drivers/gpu/drm/msm/hdmi/hdmi_hpd.c | 62 ++---------------------------
 3 files changed, 17 insertions(+), 119 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index 06b44b40ec09..7cb687458a56 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -406,20 +406,6 @@ static struct hdmi_platform_config hdmi_tx_8996_config = {
 		.hpd_freq      = hpd_clk_freq_8x74,
 };
 
-static const struct {
-	const char *name;
-	const bool output;
-	const int value;
-	const char *label;
-} msm_hdmi_gpio_pdata[] = {
-	{ "qcom,hdmi-tx-ddc-clk", true, 1, "HDMI_DDC_CLK" },
-	{ "qcom,hdmi-tx-ddc-data", true, 1, "HDMI_DDC_DATA" },
-	{ "qcom,hdmi-tx-hpd", false, 1, "HDMI_HPD" },
-	{ "qcom,hdmi-tx-mux-en", true, 1, "HDMI_MUX_EN" },
-	{ "qcom,hdmi-tx-mux-sel", true, 0, "HDMI_MUX_SEL" },
-	{ "qcom,hdmi-tx-mux-lpm", true, 1, "HDMI_MUX_LPM" },
-};
-
 /*
  * HDMI audio codec callbacks
  */
@@ -531,7 +517,7 @@ static int msm_hdmi_bind(struct device *dev, struct device *master, void *data)
 	struct hdmi_platform_config *hdmi_cfg;
 	struct hdmi *hdmi;
 	struct device_node *of_node = dev->of_node;
-	int i, err;
+	int err;
 
 	hdmi_cfg = (struct hdmi_platform_config *)
 			of_device_get_match_data(dev);
@@ -543,41 +529,16 @@ static int msm_hdmi_bind(struct device *dev, struct device *master, void *data)
 	hdmi_cfg->mmio_name     = "core_physical";
 	hdmi_cfg->qfprom_mmio_name = "qfprom_physical";
 
-	for (i = 0; i < HDMI_MAX_NUM_GPIO; i++) {
-		const char *name = msm_hdmi_gpio_pdata[i].name;
-		struct gpio_desc *gpiod;
-
-		/*
-		 * We are fetching the GPIO lines "as is" since the connector
-		 * code is enabling and disabling the lines. Until that point
-		 * the power-on default value will be kept.
-		 */
-		gpiod = devm_gpiod_get_optional(dev, name, GPIOD_ASIS);
-		/* This will catch e.g. -PROBE_DEFER */
-		if (IS_ERR(gpiod))
-			return PTR_ERR(gpiod);
-		if (!gpiod) {
-			/* Try a second time, stripping down the name */
-			char name3[32];
-
-			/*
-			 * Try again after stripping out the "qcom,hdmi-tx"
-			 * prefix. This is mainly to match "hpd-gpios" used
-			 * in the upstream bindings.
-			 */
-			if (sscanf(name, "qcom,hdmi-tx-%s", name3))
-				gpiod = devm_gpiod_get_optional(dev, name3, GPIOD_ASIS);
-			if (IS_ERR(gpiod))
-				return PTR_ERR(gpiod);
-			if (!gpiod)
-				DBG("failed to get gpio: %s", name);
-		}
-		hdmi_cfg->gpios[i].gpiod = gpiod;
-		if (gpiod)
-			gpiod_set_consumer_name(gpiod, msm_hdmi_gpio_pdata[i].label);
-		hdmi_cfg->gpios[i].output = msm_hdmi_gpio_pdata[i].output;
-		hdmi_cfg->gpios[i].value = msm_hdmi_gpio_pdata[i].value;
-	}
+	hdmi->hpd_gpiod = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
+	/* This will catch e.g. -PROBE_DEFER */
+	if (IS_ERR(hdmi->hpd_gpiod))
+		return PTR_ERR(hdmi->hpd_gpiod);
+
+	if (!hdmi->hpd_gpiod)
+		DBG("failed to get HPD gpio");
+
+	if (hdmi->hpd_gpiod)
+		gpiod_set_consumer_name(hdmi->hpd_gpiod, "HDMI_HPD");
 
 	dev->platform_data = hdmi_cfg;
 
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h
index 736f348befb3..a6c88d157bc3 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.h
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
@@ -19,17 +19,9 @@
 #include "msm_drv.h"
 #include "hdmi.xml.h"
 
-#define HDMI_MAX_NUM_GPIO	6
-
 struct hdmi_phy;
 struct hdmi_platform_config;
 
-struct hdmi_gpio_data {
-	struct gpio_desc *gpiod;
-	bool output;
-	int value;
-};
-
 struct hdmi_audio {
 	bool enabled;
 	struct hdmi_audio_infoframe infoframe;
@@ -61,6 +53,8 @@ struct hdmi {
 	struct clk **hpd_clks;
 	struct clk **pwr_clks;
 
+	struct gpio_desc *hpd_gpiod;
+
 	struct hdmi_phy *phy;
 	struct device *phy_dev;
 
@@ -109,9 +103,6 @@ struct hdmi_platform_config {
 	/* clks that need to be on for screen pwr (ie pixel clk): */
 	const char **pwr_clk_names;
 	int pwr_clk_cnt;
-
-	/* gpio's: */
-	struct hdmi_gpio_data gpios[HDMI_MAX_NUM_GPIO];
 };
 
 struct hdmi_bridge {
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c b/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
index 75605ddac7c4..bfa827b47989 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
@@ -60,48 +60,6 @@ static void msm_hdmi_phy_reset(struct hdmi *hdmi)
 	}
 }
 
-static int gpio_config(struct hdmi *hdmi, bool on)
-{
-	const struct hdmi_platform_config *config = hdmi->config;
-	int i;
-
-	if (on) {
-		for (i = 0; i < HDMI_MAX_NUM_GPIO; i++) {
-			struct hdmi_gpio_data gpio = config->gpios[i];
-
-			if (gpio.gpiod) {
-				if (gpio.output) {
-					gpiod_direction_output(gpio.gpiod,
-							       gpio.value);
-				} else {
-					gpiod_direction_input(gpio.gpiod);
-					gpiod_set_value_cansleep(gpio.gpiod,
-								 gpio.value);
-				}
-			}
-		}
-
-		DBG("gpio on");
-	} else {
-		for (i = 0; i < HDMI_MAX_NUM_GPIO; i++) {
-			struct hdmi_gpio_data gpio = config->gpios[i];
-
-			if (!gpio.gpiod)
-				continue;
-
-			if (gpio.output) {
-				int value = gpio.value ? 0 : 1;
-
-				gpiod_set_value_cansleep(gpio.gpiod, value);
-			}
-		}
-
-		DBG("gpio off");
-	}
-
-	return 0;
-}
-
 static void enable_hpd_clocks(struct hdmi *hdmi, bool enable)
 {
 	const struct hdmi_platform_config *config = hdmi->config;
@@ -154,11 +112,8 @@ int msm_hdmi_hpd_enable(struct drm_bridge *bridge)
 		goto fail;
 	}
 
-	ret = gpio_config(hdmi, true);
-	if (ret) {
-		DRM_DEV_ERROR(dev, "failed to configure GPIOs: %d\n", ret);
-		goto fail;
-	}
+	if (hdmi->hpd_gpiod)
+		gpiod_set_value_cansleep(hdmi->hpd_gpiod, 1);
 
 	pm_runtime_get_sync(dev);
 	enable_hpd_clocks(hdmi, true);
@@ -207,10 +162,6 @@ void msm_hdmi_hpd_disable(struct hdmi_bridge *hdmi_bridge)
 	enable_hpd_clocks(hdmi, false);
 	pm_runtime_put(dev);
 
-	ret = gpio_config(hdmi, false);
-	if (ret)
-		dev_warn(dev, "failed to unconfigure GPIOs: %d\n", ret);
-
 	ret = pinctrl_pm_select_sleep_state(dev);
 	if (ret)
 		dev_warn(dev, "pinctrl state chg failed: %d\n", ret);
@@ -269,10 +220,7 @@ static enum drm_connector_status detect_reg(struct hdmi *hdmi)
 #define HPD_GPIO_INDEX	2
 static enum drm_connector_status detect_gpio(struct hdmi *hdmi)
 {
-	const struct hdmi_platform_config *config = hdmi->config;
-	struct hdmi_gpio_data hpd_gpio = config->gpios[HPD_GPIO_INDEX];
-
-	return gpiod_get_value(hpd_gpio.gpiod) ?
+	return gpiod_get_value(hdmi->hpd_gpiod) ?
 			connector_status_connected :
 			connector_status_disconnected;
 }
@@ -282,8 +230,6 @@ enum drm_connector_status msm_hdmi_bridge_detect(
 {
 	struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
 	struct hdmi *hdmi = hdmi_bridge->hdmi;
-	const struct hdmi_platform_config *config = hdmi->config;
-	struct hdmi_gpio_data hpd_gpio = config->gpios[HPD_GPIO_INDEX];
 	enum drm_connector_status stat_gpio, stat_reg;
 	int retry = 20;
 
@@ -291,7 +237,7 @@ enum drm_connector_status msm_hdmi_bridge_detect(
 	 * some platforms may not have hpd gpio. Rely only on the status
 	 * provided by REG_HDMI_HPD_INT_STATUS in this case.
 	 */
-	if (!hpd_gpio.gpiod)
+	if (!hdmi->hpd_gpiod)
 		return detect_reg(hdmi);
 
 	do {
-- 
2.35.1

Re: [PATCH v2 06/12] drm/msm/hdmi: drop unused GPIO support

[kernel test robot]

Hi Dmitry,

I love your patch! Perhaps something to improve:

[auto build test WARNING on drm/drm-next]
[also build test WARNING on robh/for-next linus/master v5.19-rc1 next-20220608]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/intel-lab-lkp/linux/commits/Dmitry-Baryshkov/drm-msm-hdmi-YAML-ify-schema-and-cleanup-some-platform-properties/20220608-200925
base:   git://anongit.freedesktop.org/drm/drm drm-next
config: hexagon-randconfig-r045-20220608 (https://download.01.org/0day-ci/archive/20220608/202206082312.XB745jWy-lkp@intel.com/config)
compiler: clang version 15.0.0 (https://github.com/llvm/llvm-project b92436efcb7813fc481b30f2593a4907568d917a)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/c3e263fe0a077b382c2a76911c8ace385bd59a4c
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Dmitry-Baryshkov/drm-msm-hdmi-YAML-ify-schema-and-cleanup-some-platform-properties/20220608-200925
        git checkout c3e263fe0a077b382c2a76911c8ace385bd59a4c
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=hexagon SHELL=/bin/bash drivers/gpu/drm/msm/

If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

>> drivers/gpu/drm/msm/hdmi/hdmi.c:532:2: warning: variable 'hdmi' is uninitialized when used here [-Wuninitialized]
           hdmi->hpd_gpiod = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
           ^~~~
   drivers/gpu/drm/msm/hdmi/hdmi.c:518:19: note: initialize the variable 'hdmi' to silence this warning
           struct hdmi *hdmi;
                            ^
                             = NULL
   1 warning generated.

Kconfig warnings: (for reference only)
   WARNING: unmet direct dependencies detected for DRM_DP_AUX_BUS
   Depends on HAS_IOMEM && DRM && OF
   Selected by
   - DRM_MSM && HAS_IOMEM && DRM && (ARCH_QCOM || SOC_IMX5 || COMPILE_TEST && COMMON_CLK && IOMMU_SUPPORT && (QCOM_OCMEM || QCOM_OCMEM && (QCOM_LLCC || QCOM_LLCC && (QCOM_COMMAND_DB || QCOM_COMMAND_DB


vim +/hdmi +532 drivers/gpu/drm/msm/hdmi/hdmi.c

   513	
   514	static int msm_hdmi_bind(struct device *dev, struct device *master, void *data)
   515	{
   516		struct msm_drm_private *priv = dev_get_drvdata(master);
   517		struct hdmi_platform_config *hdmi_cfg;
   518		struct hdmi *hdmi;
   519		struct device_node *of_node = dev->of_node;
   520		int err;
   521	
   522		hdmi_cfg = (struct hdmi_platform_config *)
   523				of_device_get_match_data(dev);
   524		if (!hdmi_cfg) {
   525			DRM_DEV_ERROR(dev, "unknown hdmi_cfg: %pOFn\n", of_node);
   526			return -ENXIO;
   527		}
   528	
   529		hdmi_cfg->mmio_name     = "core_physical";
   530		hdmi_cfg->qfprom_mmio_name = "qfprom_physical";
   531	
 > 532		hdmi->hpd_gpiod = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
   533		/* This will catch e.g. -PROBE_DEFER */
   534		if (IS_ERR(hdmi->hpd_gpiod))
   535			return PTR_ERR(hdmi->hpd_gpiod);
   536	
   537		if (!hdmi->hpd_gpiod)
   538			DBG("failed to get HPD gpio");
   539	
   540		if (hdmi->hpd_gpiod)
   541			gpiod_set_consumer_name(hdmi->hpd_gpiod, "HDMI_HPD");
   542	
   543		dev->platform_data = hdmi_cfg;
   544	
   545		hdmi = msm_hdmi_init(to_platform_device(dev));
   546		if (IS_ERR(hdmi))
   547			return PTR_ERR(hdmi);
   548		priv->hdmi = hdmi;
   549	
   550		err = msm_hdmi_register_audio_driver(hdmi, dev);
   551		if (err) {
   552			DRM_ERROR("Failed to attach an audio codec %d\n", err);
   553			hdmi->audio_pdev = NULL;
   554		}
   555	
   556		return 0;
   557	}
   558	

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

Re: [PATCH v2 06/12] drm/msm/hdmi: drop unused GPIO support

[kernel test robot]

Hi Dmitry,

I love your patch! Perhaps something to improve:

[auto build test WARNING on drm/drm-next]
[also build test WARNING on robh/for-next linus/master v5.19-rc1 next-20220608]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/intel-lab-lkp/linux/commits/Dmitry-Baryshkov/drm-msm-hdmi-YAML-ify-schema-and-cleanup-some-platform-properties/20220608-200925
base:   git://anongit.freedesktop.org/drm/drm drm-next
config: hexagon-randconfig-r045-20220608 (https://download.01.org/0day-ci/archive/20220608/202206082312.XB745jWy-lkp@intel.com/config)
compiler: clang version 15.0.0 (https://github.com/llvm/llvm-project b92436efcb7813fc481b30f2593a4907568d917a)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/c3e263fe0a077b382c2a76911c8ace385bd59a4c
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Dmitry-Baryshkov/drm-msm-hdmi-YAML-ify-schema-and-cleanup-some-platform-properties/20220608-200925
        git checkout c3e263fe0a077b382c2a76911c8ace385bd59a4c
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=hexagon SHELL=/bin/bash drivers/gpu/drm/msm/

If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

>> drivers/gpu/drm/msm/hdmi/hdmi.c:532:2: warning: variable 'hdmi' is uninitialized when used here [-Wuninitialized]
           hdmi->hpd_gpiod = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
           ^~~~
   drivers/gpu/drm/msm/hdmi/hdmi.c:518:19: note: initialize the variable 'hdmi' to silence this warning
           struct hdmi *hdmi;
                            ^
                             = NULL
   1 warning generated.

Kconfig warnings: (for reference only)
   WARNING: unmet direct dependencies detected for DRM_DP_AUX_BUS
   Depends on HAS_IOMEM && DRM && OF
   Selected by
   - DRM_MSM && HAS_IOMEM && DRM && (ARCH_QCOM || SOC_IMX5 || COMPILE_TEST && COMMON_CLK && IOMMU_SUPPORT && (QCOM_OCMEM || QCOM_OCMEM && (QCOM_LLCC || QCOM_LLCC && (QCOM_COMMAND_DB || QCOM_COMMAND_DB


vim +/hdmi +532 drivers/gpu/drm/msm/hdmi/hdmi.c

   513	
   514	static int msm_hdmi_bind(struct device *dev, struct device *master, void *data)
   515	{
   516		struct msm_drm_private *priv = dev_get_drvdata(master);
   517		struct hdmi_platform_config *hdmi_cfg;
   518		struct hdmi *hdmi;
   519		struct device_node *of_node = dev->of_node;
   520		int err;
   521	
   522		hdmi_cfg = (struct hdmi_platform_config *)
   523				of_device_get_match_data(dev);
   524		if (!hdmi_cfg) {
   525			DRM_DEV_ERROR(dev, "unknown hdmi_cfg: %pOFn\n", of_node);
   526			return -ENXIO;
   527		}
   528	
   529		hdmi_cfg->mmio_name     = "core_physical";
   530		hdmi_cfg->qfprom_mmio_name = "qfprom_physical";
   531	
 > 532		hdmi->hpd_gpiod = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
   533		/* This will catch e.g. -PROBE_DEFER */
   534		if (IS_ERR(hdmi->hpd_gpiod))
   535			return PTR_ERR(hdmi->hpd_gpiod);
   536	
   537		if (!hdmi->hpd_gpiod)
   538			DBG("failed to get HPD gpio");
   539	
   540		if (hdmi->hpd_gpiod)
   541			gpiod_set_consumer_name(hdmi->hpd_gpiod, "HDMI_HPD");
   542	
   543		dev->platform_data = hdmi_cfg;
   544	
   545		hdmi = msm_hdmi_init(to_platform_device(dev));
   546		if (IS_ERR(hdmi))
   547			return PTR_ERR(hdmi);
   548		priv->hdmi = hdmi;
   549	
   550		err = msm_hdmi_register_audio_driver(hdmi, dev);
   551		if (err) {
   552			DRM_ERROR("Failed to attach an audio codec %d\n", err);
   553			hdmi->audio_pdev = NULL;
   554		}
   555	
   556		return 0;
   557	}
   558	

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

Re: [PATCH v2 06/12] drm/msm/hdmi: drop unused GPIO support

[Stephen Boyd]

Quoting Dmitry Baryshkov (2022-06-08 05:07:17)
> @@ -543,41 +529,16 @@ static int msm_hdmi_bind(struct device *dev, struct device *master, void *data)
>         hdmi_cfg->mmio_name     = "core_physical";
>         hdmi_cfg->qfprom_mmio_name = "qfprom_physical";
>
> -       for (i = 0; i < HDMI_MAX_NUM_GPIO; i++) {
[...]
> -               if (gpiod)
> -                       gpiod_set_consumer_name(gpiod, msm_hdmi_gpio_pdata[i].label);
> -               hdmi_cfg->gpios[i].output = msm_hdmi_gpio_pdata[i].output;
> -               hdmi_cfg->gpios[i].value = msm_hdmi_gpio_pdata[i].value;
> -       }
> +       hdmi->hpd_gpiod = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
> +       /* This will catch e.g. -PROBE_DEFER */

EPROBE_DEFER?

> +       if (IS_ERR(hdmi->hpd_gpiod))
> +               return PTR_ERR(hdmi->hpd_gpiod);
> +
> +       if (!hdmi->hpd_gpiod)
> +               DBG("failed to get HPD gpio");

Does DBG() add newlines?

> +
> +       if (hdmi->hpd_gpiod)
> +               gpiod_set_consumer_name(hdmi->hpd_gpiod, "HDMI_HPD");
>
>         dev->platform_data = hdmi_cfg;
>

Re: [PATCH v2 06/12] drm/msm/hdmi: drop unused GPIO support

[Stephen Boyd]

Quoting Dmitry Baryshkov (2022-06-08 05:07:17)
> @@ -543,41 +529,16 @@ static int msm_hdmi_bind(struct device *dev, struct device *master, void *data)
>         hdmi_cfg->mmio_name     = "core_physical";
>         hdmi_cfg->qfprom_mmio_name = "qfprom_physical";
>
> -       for (i = 0; i < HDMI_MAX_NUM_GPIO; i++) {
[...]
> -               if (gpiod)
> -                       gpiod_set_consumer_name(gpiod, msm_hdmi_gpio_pdata[i].label);
> -               hdmi_cfg->gpios[i].output = msm_hdmi_gpio_pdata[i].output;
> -               hdmi_cfg->gpios[i].value = msm_hdmi_gpio_pdata[i].value;
> -       }
> +       hdmi->hpd_gpiod = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
> +       /* This will catch e.g. -PROBE_DEFER */

EPROBE_DEFER?

> +       if (IS_ERR(hdmi->hpd_gpiod))
> +               return PTR_ERR(hdmi->hpd_gpiod);
> +
> +       if (!hdmi->hpd_gpiod)
> +               DBG("failed to get HPD gpio");

Does DBG() add newlines?

> +
> +       if (hdmi->hpd_gpiod)
> +               gpiod_set_consumer_name(hdmi->hpd_gpiod, "HDMI_HPD");
>
>         dev->platform_data = hdmi_cfg;
>

Re: [PATCH v2 06/12] drm/msm/hdmi: drop unused GPIO support

[Dmitry Baryshkov]

On 08/06/2022 23:59, Stephen Boyd wrote:
> Quoting Dmitry Baryshkov (2022-06-08 05:07:17)
>> @@ -543,41 +529,16 @@ static int msm_hdmi_bind(struct device *dev, struct device *master, void *data)
>>          hdmi_cfg->mmio_name     = "core_physical";
>>          hdmi_cfg->qfprom_mmio_name = "qfprom_physical";
>>
>> -       for (i = 0; i < HDMI_MAX_NUM_GPIO; i++) {
> [...]
>> -               if (gpiod)
>> -                       gpiod_set_consumer_name(gpiod, msm_hdmi_gpio_pdata[i].label);
>> -               hdmi_cfg->gpios[i].output = msm_hdmi_gpio_pdata[i].output;
>> -               hdmi_cfg->gpios[i].value = msm_hdmi_gpio_pdata[i].value;
>> -       }
>> +       hdmi->hpd_gpiod = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
>> +       /* This will catch e.g. -PROBE_DEFER */
> 
> EPROBE_DEFER?

Ack.

> 
>> +       if (IS_ERR(hdmi->hpd_gpiod))
>> +               return PTR_ERR(hdmi->hpd_gpiod);
>> +
>> +       if (!hdmi->hpd_gpiod)
>> +               DBG("failed to get HPD gpio");
> 
> Does DBG() add newlines?

Yes, it does.

> 
>> +
>> +       if (hdmi->hpd_gpiod)
>> +               gpiod_set_consumer_name(hdmi->hpd_gpiod, "HDMI_HPD");
>>
>>          dev->platform_data = hdmi_cfg;
>>


-- 
With best wishes
Dmitry

Re: [PATCH v2 06/12] drm/msm/hdmi: drop unused GPIO support

[Dmitry Baryshkov]

On 08/06/2022 23:59, Stephen Boyd wrote:
> Quoting Dmitry Baryshkov (2022-06-08 05:07:17)
>> @@ -543,41 +529,16 @@ static int msm_hdmi_bind(struct device *dev, struct device *master, void *data)
>>          hdmi_cfg->mmio_name     = "core_physical";
>>          hdmi_cfg->qfprom_mmio_name = "qfprom_physical";
>>
>> -       for (i = 0; i < HDMI_MAX_NUM_GPIO; i++) {
> [...]
>> -               if (gpiod)
>> -                       gpiod_set_consumer_name(gpiod, msm_hdmi_gpio_pdata[i].label);
>> -               hdmi_cfg->gpios[i].output = msm_hdmi_gpio_pdata[i].output;
>> -               hdmi_cfg->gpios[i].value = msm_hdmi_gpio_pdata[i].value;
>> -       }
>> +       hdmi->hpd_gpiod = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
>> +       /* This will catch e.g. -PROBE_DEFER */
> 
> EPROBE_DEFER?

Ack.

> 
>> +       if (IS_ERR(hdmi->hpd_gpiod))
>> +               return PTR_ERR(hdmi->hpd_gpiod);
>> +
>> +       if (!hdmi->hpd_gpiod)
>> +               DBG("failed to get HPD gpio");
> 
> Does DBG() add newlines?

Yes, it does.

> 
>> +
>> +       if (hdmi->hpd_gpiod)
>> +               gpiod_set_consumer_name(hdmi->hpd_gpiod, "HDMI_HPD");
>>
>>          dev->platform_data = hdmi_cfg;
>>


-- 
With best wishes
Dmitry

[PATCH v2 07/12] drm/msm/hdmi: enable core-vcc/core-vdda-supply for 8996 platform

[Dmitry Baryshkov]

DB820c makes use of core-vcc-supply and core-vdda-supply, however the
driver code doesn't support these regulators. Enable them for HDMI on
8996 platform.

Fixes: 0afbe59edd3f ("drm/msm/hdmi: Add basic HDMI support for msm8996")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index 7cb687458a56..67397fff645c 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -399,7 +399,7 @@ static struct hdmi_platform_config hdmi_tx_8994_config = {
 };
 
 static struct hdmi_platform_config hdmi_tx_8996_config = {
-		HDMI_CFG(pwr_reg, none),
+		HDMI_CFG(pwr_reg, 8x74),
 		HDMI_CFG(hpd_reg, none),
 		HDMI_CFG(pwr_clk, 8x74),
 		HDMI_CFG(hpd_clk, 8x74),
-- 
2.35.1

[PATCH v2 07/12] drm/msm/hdmi: enable core-vcc/core-vdda-supply for 8996 platform

[Dmitry Baryshkov]

DB820c makes use of core-vcc-supply and core-vdda-supply, however the
driver code doesn't support these regulators. Enable them for HDMI on
8996 platform.

Fixes: 0afbe59edd3f ("drm/msm/hdmi: Add basic HDMI support for msm8996")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index 7cb687458a56..67397fff645c 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -399,7 +399,7 @@ static struct hdmi_platform_config hdmi_tx_8994_config = {
 };
 
 static struct hdmi_platform_config hdmi_tx_8996_config = {
-		HDMI_CFG(pwr_reg, none),
+		HDMI_CFG(pwr_reg, 8x74),
 		HDMI_CFG(hpd_reg, none),
 		HDMI_CFG(pwr_clk, 8x74),
 		HDMI_CFG(hpd_clk, 8x74),
-- 
2.35.1

Re: [PATCH v2 07/12] drm/msm/hdmi: enable core-vcc/core-vdda-supply for 8996 platform

[Stephen Boyd]

Quoting Dmitry Baryshkov (2022-06-08 05:07:18)
> DB820c makes use of core-vcc-supply and core-vdda-supply, however the
> driver code doesn't support these regulators. Enable them for HDMI on
> 8996 platform.

The 'vdda-supply' name makes me think this is another scenario where the
phy isn't powering on the analog supply when it should be and so the
controller driver is doing it instead. Is that the case here?

>
> Fixes: 0afbe59edd3f ("drm/msm/hdmi: Add basic HDMI support for msm8996")
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Re: [PATCH v2 07/12] drm/msm/hdmi: enable core-vcc/core-vdda-supply for 8996 platform

[Stephen Boyd]

Quoting Dmitry Baryshkov (2022-06-08 05:07:18)
> DB820c makes use of core-vcc-supply and core-vdda-supply, however the
> driver code doesn't support these regulators. Enable them for HDMI on
> 8996 platform.

The 'vdda-supply' name makes me think this is another scenario where the
phy isn't powering on the analog supply when it should be and so the
controller driver is doing it instead. Is that the case here?

>
> Fixes: 0afbe59edd3f ("drm/msm/hdmi: Add basic HDMI support for msm8996")
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Re: [PATCH v2 07/12] drm/msm/hdmi: enable core-vcc/core-vdda-supply for 8996 platform

[Dmitry Baryshkov]

On Thu, 9 Jun 2022 at 00:02, Stephen Boyd <swboyd@chromium.org> wrote:
>
> Quoting Dmitry Baryshkov (2022-06-08 05:07:18)
> > DB820c makes use of core-vcc-supply and core-vdda-supply, however the
> > driver code doesn't support these regulators. Enable them for HDMI on
> > 8996 platform.
>
> The 'vdda-supply' name makes me think this is another scenario where the
> phy isn't powering on the analog supply when it should be and so the
> controller driver is doing it instead. Is that the case here?

Good question. There are different HDMI pins on 8996, with slight
disagreement between the schematics and the datasheet.
vcca_hdmi/vdd_hdmi1: 0.925V, Power for HDMI circuits – low voltage
vdda_hdmi/vdd_hdmi2: 1.8V, Power for HDMI circuits – high voltage
vdda_hdmi_pll/vdd_pll3, 1.8V, Power for PLL circuits

I'm not sure which are required for the PHY and which are required for
the core HDMI. However I'd note that we have a generic tendency of
duplicating pins between the HDMI and the PHY devices. Compare this
with 8064, where core-vdda-supply is also used both by the hdmi-tx and
hdmi-phy devices. I think we unify 8x74/84 with 8996 and allow
powering up the HDMI correctly even if it results in duplication
between the -phy and -tx parts.


-- 
With best wishes
Dmitry

Re: [PATCH v2 07/12] drm/msm/hdmi: enable core-vcc/core-vdda-supply for 8996 platform

[Dmitry Baryshkov]

On Thu, 9 Jun 2022 at 00:02, Stephen Boyd <swboyd@chromium.org> wrote:
>
> Quoting Dmitry Baryshkov (2022-06-08 05:07:18)
> > DB820c makes use of core-vcc-supply and core-vdda-supply, however the
> > driver code doesn't support these regulators. Enable them for HDMI on
> > 8996 platform.
>
> The 'vdda-supply' name makes me think this is another scenario where the
> phy isn't powering on the analog supply when it should be and so the
> controller driver is doing it instead. Is that the case here?

Good question. There are different HDMI pins on 8996, with slight
disagreement between the schematics and the datasheet.
vcca_hdmi/vdd_hdmi1: 0.925V, Power for HDMI circuits – low voltage
vdda_hdmi/vdd_hdmi2: 1.8V, Power for HDMI circuits – high voltage
vdda_hdmi_pll/vdd_pll3, 1.8V, Power for PLL circuits

I'm not sure which are required for the PHY and which are required for
the core HDMI. However I'd note that we have a generic tendency of
duplicating pins between the HDMI and the PHY devices. Compare this
with 8064, where core-vdda-supply is also used both by the hdmi-tx and
hdmi-phy devices. I think we unify 8x74/84 with 8996 and allow
powering up the HDMI correctly even if it results in duplication
between the -phy and -tx parts.


-- 
With best wishes
Dmitry

[PATCH v2 08/12] drm/msm/hdmi: drop empty 'none' regulator lists

[Dmitry Baryshkov]

Several platform configs use empty 'none' regulator arrays. They are not
necessary, as the code will use corresponding _cnt field and skip the
array completely. Drop them now.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index 67397fff645c..ebc87f2a626c 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -353,9 +353,6 @@ int msm_hdmi_modeset_init(struct hdmi *hdmi,
 	.item ## _names = item ##_names_ ## entry, \
 	.item ## _cnt   = ARRAY_SIZE(item ## _names_ ## entry)
 
-static const char *pwr_reg_names_none[] = {};
-static const char *hpd_reg_names_none[] = {};
-
 static struct hdmi_platform_config hdmi_tx_8660_config;
 
 static const char *hpd_reg_names_8960[] = {"core-vdda"};
@@ -392,7 +389,6 @@ static struct hdmi_platform_config hdmi_tx_8084_config = {
 
 static struct hdmi_platform_config hdmi_tx_8994_config = {
 		HDMI_CFG(pwr_reg, 8x74),
-		HDMI_CFG(hpd_reg, none),
 		HDMI_CFG(pwr_clk, 8x74),
 		HDMI_CFG(hpd_clk, 8x74),
 		.hpd_freq      = hpd_clk_freq_8x74,
@@ -400,7 +396,6 @@ static struct hdmi_platform_config hdmi_tx_8994_config = {
 
 static struct hdmi_platform_config hdmi_tx_8996_config = {
 		HDMI_CFG(pwr_reg, 8x74),
-		HDMI_CFG(hpd_reg, none),
 		HDMI_CFG(pwr_clk, 8x74),
 		HDMI_CFG(hpd_clk, 8x74),
 		.hpd_freq      = hpd_clk_freq_8x74,
-- 
2.35.1

[PATCH v2 08/12] drm/msm/hdmi: drop empty 'none' regulator lists

[Dmitry Baryshkov]

Several platform configs use empty 'none' regulator arrays. They are not
necessary, as the code will use corresponding _cnt field and skip the
array completely. Drop them now.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index 67397fff645c..ebc87f2a626c 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -353,9 +353,6 @@ int msm_hdmi_modeset_init(struct hdmi *hdmi,
 	.item ## _names = item ##_names_ ## entry, \
 	.item ## _cnt   = ARRAY_SIZE(item ## _names_ ## entry)
 
-static const char *pwr_reg_names_none[] = {};
-static const char *hpd_reg_names_none[] = {};
-
 static struct hdmi_platform_config hdmi_tx_8660_config;
 
 static const char *hpd_reg_names_8960[] = {"core-vdda"};
@@ -392,7 +389,6 @@ static struct hdmi_platform_config hdmi_tx_8084_config = {
 
 static struct hdmi_platform_config hdmi_tx_8994_config = {
 		HDMI_CFG(pwr_reg, 8x74),
-		HDMI_CFG(hpd_reg, none),
 		HDMI_CFG(pwr_clk, 8x74),
 		HDMI_CFG(hpd_clk, 8x74),
 		.hpd_freq      = hpd_clk_freq_8x74,
@@ -400,7 +396,6 @@ static struct hdmi_platform_config hdmi_tx_8994_config = {
 
 static struct hdmi_platform_config hdmi_tx_8996_config = {
 		HDMI_CFG(pwr_reg, 8x74),
-		HDMI_CFG(hpd_reg, none),
 		HDMI_CFG(pwr_clk, 8x74),
 		HDMI_CFG(hpd_clk, 8x74),
 		.hpd_freq      = hpd_clk_freq_8x74,
-- 
2.35.1

Re: [PATCH v2 08/12] drm/msm/hdmi: drop empty 'none' regulator lists

[Stephen Boyd]

Quoting Dmitry Baryshkov (2022-06-08 05:07:19)
> Several platform configs use empty 'none' regulator arrays. They are not
> necessary, as the code will use corresponding _cnt field and skip the
> array completely. Drop them now.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Re: [PATCH v2 08/12] drm/msm/hdmi: drop empty 'none' regulator lists

[Stephen Boyd]

Quoting Dmitry Baryshkov (2022-06-08 05:07:19)
> Several platform configs use empty 'none' regulator arrays. They are not
> necessary, as the code will use corresponding _cnt field and skip the
> array completely. Drop them now.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

[PATCH v2 09/12] drm/msm/hdmi: drop hpd_regs usage on 8x74/8084

[Dmitry Baryshkov]

The MSM HDMI driver has support for hpd_regs on 8x74/8084: supply
regulators that are to be enabled for HPD to work. Currently these
regulators contain the hpd_gdsc, which was replaced by the power-domains
support and hpd-5v/hpd-5v-en, which are not used by the chip itself.
They power up the ESD bridge.
However it is a separate device which should be represented separately
in the device tree.
None of upstreamed devices support these properties. Thus drop support
for them from the HDMI driver.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index ebc87f2a626c..bc6ec6aa2cb9 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -364,24 +364,19 @@ static struct hdmi_platform_config hdmi_tx_8960_config = {
 };
 
 static const char *pwr_reg_names_8x74[] = {"core-vdda", "core-vcc"};
-static const char *hpd_reg_names_8x74[] = {"hpd-gdsc", "hpd-5v"};
 static const char *pwr_clk_names_8x74[] = {"extp", "alt_iface"};
 static const char *hpd_clk_names_8x74[] = {"iface", "core", "mdp_core"};
 static unsigned long hpd_clk_freq_8x74[] = {0, 19200000, 0};
 
 static struct hdmi_platform_config hdmi_tx_8974_config = {
 		HDMI_CFG(pwr_reg, 8x74),
-		HDMI_CFG(hpd_reg, 8x74),
 		HDMI_CFG(pwr_clk, 8x74),
 		HDMI_CFG(hpd_clk, 8x74),
 		.hpd_freq      = hpd_clk_freq_8x74,
 };
 
-static const char *hpd_reg_names_8084[] = {"hpd-gdsc", "hpd-5v", "hpd-5v-en"};
-
 static struct hdmi_platform_config hdmi_tx_8084_config = {
 		HDMI_CFG(pwr_reg, 8x74),
-		HDMI_CFG(hpd_reg, 8084),
 		HDMI_CFG(pwr_clk, 8x74),
 		HDMI_CFG(hpd_clk, 8x74),
 		.hpd_freq      = hpd_clk_freq_8x74,
-- 
2.35.1

[PATCH v2 09/12] drm/msm/hdmi: drop hpd_regs usage on 8x74/8084

[Dmitry Baryshkov]

The MSM HDMI driver has support for hpd_regs on 8x74/8084: supply
regulators that are to be enabled for HPD to work. Currently these
regulators contain the hpd_gdsc, which was replaced by the power-domains
support and hpd-5v/hpd-5v-en, which are not used by the chip itself.
They power up the ESD bridge.
However it is a separate device which should be represented separately
in the device tree.
None of upstreamed devices support these properties. Thus drop support
for them from the HDMI driver.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index ebc87f2a626c..bc6ec6aa2cb9 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -364,24 +364,19 @@ static struct hdmi_platform_config hdmi_tx_8960_config = {
 };
 
 static const char *pwr_reg_names_8x74[] = {"core-vdda", "core-vcc"};
-static const char *hpd_reg_names_8x74[] = {"hpd-gdsc", "hpd-5v"};
 static const char *pwr_clk_names_8x74[] = {"extp", "alt_iface"};
 static const char *hpd_clk_names_8x74[] = {"iface", "core", "mdp_core"};
 static unsigned long hpd_clk_freq_8x74[] = {0, 19200000, 0};
 
 static struct hdmi_platform_config hdmi_tx_8974_config = {
 		HDMI_CFG(pwr_reg, 8x74),
-		HDMI_CFG(hpd_reg, 8x74),
 		HDMI_CFG(pwr_clk, 8x74),
 		HDMI_CFG(hpd_clk, 8x74),
 		.hpd_freq      = hpd_clk_freq_8x74,
 };
 
-static const char *hpd_reg_names_8084[] = {"hpd-gdsc", "hpd-5v", "hpd-5v-en"};
-
 static struct hdmi_platform_config hdmi_tx_8084_config = {
 		HDMI_CFG(pwr_reg, 8x74),
-		HDMI_CFG(hpd_reg, 8084),
 		HDMI_CFG(pwr_clk, 8x74),
 		HDMI_CFG(hpd_clk, 8x74),
 		.hpd_freq      = hpd_clk_freq_8x74,
-- 
2.35.1

Re: [PATCH v2 09/12] drm/msm/hdmi: drop hpd_regs usage on 8x74/8084

[Stephen Boyd]

Quoting Dmitry Baryshkov (2022-06-08 05:07:20)
> The MSM HDMI driver has support for hpd_regs on 8x74/8084: supply
> regulators that are to be enabled for HPD to work. Currently these
> regulators contain the hpd_gdsc, which was replaced by the power-domains
> support and hpd-5v/hpd-5v-en, which are not used by the chip itself.
> They power up the ESD bridge.
> However it is a separate device which should be represented separately
> in the device tree.
> None of upstreamed devices support these properties. Thus drop support
> for them from the HDMI driver.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Re: [PATCH v2 09/12] drm/msm/hdmi: drop hpd_regs usage on 8x74/8084

[Stephen Boyd]

Quoting Dmitry Baryshkov (2022-06-08 05:07:20)
> The MSM HDMI driver has support for hpd_regs on 8x74/8084: supply
> regulators that are to be enabled for HPD to work. Currently these
> regulators contain the hpd_gdsc, which was replaced by the power-domains
> support and hpd-5v/hpd-5v-en, which are not used by the chip itself.
> They power up the ESD bridge.
> However it is a separate device which should be represented separately
> in the device tree.
> None of upstreamed devices support these properties. Thus drop support
> for them from the HDMI driver.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

[PATCH v2 10/12] drm/msm/hdmi: merge platform config for 8974/8084/8994/8996

[Dmitry Baryshkov]

Since there is no more difference between the HDMI platform data
between MSM8974/APQ8084/MSM8994/MSM8996, merge these configs into a
single entry.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi.c | 27 +++------------------------
 1 file changed, 3 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index bc6ec6aa2cb9..a718e0ebf6cd 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -375,27 +375,6 @@ static struct hdmi_platform_config hdmi_tx_8974_config = {
 		.hpd_freq      = hpd_clk_freq_8x74,
 };
 
-static struct hdmi_platform_config hdmi_tx_8084_config = {
-		HDMI_CFG(pwr_reg, 8x74),
-		HDMI_CFG(pwr_clk, 8x74),
-		HDMI_CFG(hpd_clk, 8x74),
-		.hpd_freq      = hpd_clk_freq_8x74,
-};
-
-static struct hdmi_platform_config hdmi_tx_8994_config = {
-		HDMI_CFG(pwr_reg, 8x74),
-		HDMI_CFG(pwr_clk, 8x74),
-		HDMI_CFG(hpd_clk, 8x74),
-		.hpd_freq      = hpd_clk_freq_8x74,
-};
-
-static struct hdmi_platform_config hdmi_tx_8996_config = {
-		HDMI_CFG(pwr_reg, 8x74),
-		HDMI_CFG(pwr_clk, 8x74),
-		HDMI_CFG(hpd_clk, 8x74),
-		.hpd_freq      = hpd_clk_freq_8x74,
-};
-
 /*
  * HDMI audio codec callbacks
  */
@@ -577,9 +556,9 @@ static int msm_hdmi_dev_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id msm_hdmi_dt_match[] = {
-	{ .compatible = "qcom,hdmi-tx-8996", .data = &hdmi_tx_8996_config },
-	{ .compatible = "qcom,hdmi-tx-8994", .data = &hdmi_tx_8994_config },
-	{ .compatible = "qcom,hdmi-tx-8084", .data = &hdmi_tx_8084_config },
+	{ .compatible = "qcom,hdmi-tx-8996", .data = &hdmi_tx_8974_config },
+	{ .compatible = "qcom,hdmi-tx-8994", .data = &hdmi_tx_8974_config },
+	{ .compatible = "qcom,hdmi-tx-8084", .data = &hdmi_tx_8974_config },
 	{ .compatible = "qcom,hdmi-tx-8974", .data = &hdmi_tx_8974_config },
 	{ .compatible = "qcom,hdmi-tx-8960", .data = &hdmi_tx_8960_config },
 	{ .compatible = "qcom,hdmi-tx-8660", .data = &hdmi_tx_8660_config },
-- 
2.35.1

[PATCH v2 10/12] drm/msm/hdmi: merge platform config for 8974/8084/8994/8996

[Dmitry Baryshkov]

Since there is no more difference between the HDMI platform data
between MSM8974/APQ8084/MSM8994/MSM8996, merge these configs into a
single entry.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi.c | 27 +++------------------------
 1 file changed, 3 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index bc6ec6aa2cb9..a718e0ebf6cd 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -375,27 +375,6 @@ static struct hdmi_platform_config hdmi_tx_8974_config = {
 		.hpd_freq      = hpd_clk_freq_8x74,
 };
 
-static struct hdmi_platform_config hdmi_tx_8084_config = {
-		HDMI_CFG(pwr_reg, 8x74),
-		HDMI_CFG(pwr_clk, 8x74),
-		HDMI_CFG(hpd_clk, 8x74),
-		.hpd_freq      = hpd_clk_freq_8x74,
-};
-
-static struct hdmi_platform_config hdmi_tx_8994_config = {
-		HDMI_CFG(pwr_reg, 8x74),
-		HDMI_CFG(pwr_clk, 8x74),
-		HDMI_CFG(hpd_clk, 8x74),
-		.hpd_freq      = hpd_clk_freq_8x74,
-};
-
-static struct hdmi_platform_config hdmi_tx_8996_config = {
-		HDMI_CFG(pwr_reg, 8x74),
-		HDMI_CFG(pwr_clk, 8x74),
-		HDMI_CFG(hpd_clk, 8x74),
-		.hpd_freq      = hpd_clk_freq_8x74,
-};
-
 /*
  * HDMI audio codec callbacks
  */
@@ -577,9 +556,9 @@ static int msm_hdmi_dev_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id msm_hdmi_dt_match[] = {
-	{ .compatible = "qcom,hdmi-tx-8996", .data = &hdmi_tx_8996_config },
-	{ .compatible = "qcom,hdmi-tx-8994", .data = &hdmi_tx_8994_config },
-	{ .compatible = "qcom,hdmi-tx-8084", .data = &hdmi_tx_8084_config },
+	{ .compatible = "qcom,hdmi-tx-8996", .data = &hdmi_tx_8974_config },
+	{ .compatible = "qcom,hdmi-tx-8994", .data = &hdmi_tx_8974_config },
+	{ .compatible = "qcom,hdmi-tx-8084", .data = &hdmi_tx_8974_config },
 	{ .compatible = "qcom,hdmi-tx-8974", .data = &hdmi_tx_8974_config },
 	{ .compatible = "qcom,hdmi-tx-8960", .data = &hdmi_tx_8960_config },
 	{ .compatible = "qcom,hdmi-tx-8660", .data = &hdmi_tx_8660_config },
-- 
2.35.1

Re: [PATCH v2 10/12] drm/msm/hdmi: merge platform config for 8974/8084/8994/8996

[Stephen Boyd]

Quoting Dmitry Baryshkov (2022-06-08 05:07:21)
> Since there is no more difference between the HDMI platform data
> between MSM8974/APQ8084/MSM8994/MSM8996, merge these configs into a
> single entry.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Re: [PATCH v2 10/12] drm/msm/hdmi: merge platform config for 8974/8084/8994/8996

[Stephen Boyd]

Quoting Dmitry Baryshkov (2022-06-08 05:07:21)
> Since there is no more difference between the HDMI platform data
> between MSM8974/APQ8084/MSM8994/MSM8996, merge these configs into a
> single entry.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

[PATCH v2 11/12] drm/msm/hdmi: reuse MSM8960's config for MSM8660

[Dmitry Baryshkov]

MSM8660 requires the same set of clocks and regulators as MSM8960. Reuse
MSM8960's config for the MSM8660 (8x60).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index a718e0ebf6cd..e3b35b406e51 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -353,8 +353,6 @@ int msm_hdmi_modeset_init(struct hdmi *hdmi,
 	.item ## _names = item ##_names_ ## entry, \
 	.item ## _cnt   = ARRAY_SIZE(item ## _names_ ## entry)
 
-static struct hdmi_platform_config hdmi_tx_8660_config;
-
 static const char *hpd_reg_names_8960[] = {"core-vdda"};
 static const char *hpd_clk_names_8960[] = {"core", "master_iface", "slave_iface"};
 
@@ -561,7 +559,7 @@ static const struct of_device_id msm_hdmi_dt_match[] = {
 	{ .compatible = "qcom,hdmi-tx-8084", .data = &hdmi_tx_8974_config },
 	{ .compatible = "qcom,hdmi-tx-8974", .data = &hdmi_tx_8974_config },
 	{ .compatible = "qcom,hdmi-tx-8960", .data = &hdmi_tx_8960_config },
-	{ .compatible = "qcom,hdmi-tx-8660", .data = &hdmi_tx_8660_config },
+	{ .compatible = "qcom,hdmi-tx-8660", .data = &hdmi_tx_8960_config },
 	{}
 };
 
-- 
2.35.1

[PATCH v2 11/12] drm/msm/hdmi: reuse MSM8960's config for MSM8660

[Dmitry Baryshkov]

MSM8660 requires the same set of clocks and regulators as MSM8960. Reuse
MSM8960's config for the MSM8660 (8x60).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index a718e0ebf6cd..e3b35b406e51 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -353,8 +353,6 @@ int msm_hdmi_modeset_init(struct hdmi *hdmi,
 	.item ## _names = item ##_names_ ## entry, \
 	.item ## _cnt   = ARRAY_SIZE(item ## _names_ ## entry)
 
-static struct hdmi_platform_config hdmi_tx_8660_config;
-
 static const char *hpd_reg_names_8960[] = {"core-vdda"};
 static const char *hpd_clk_names_8960[] = {"core", "master_iface", "slave_iface"};
 
@@ -561,7 +559,7 @@ static const struct of_device_id msm_hdmi_dt_match[] = {
 	{ .compatible = "qcom,hdmi-tx-8084", .data = &hdmi_tx_8974_config },
 	{ .compatible = "qcom,hdmi-tx-8974", .data = &hdmi_tx_8974_config },
 	{ .compatible = "qcom,hdmi-tx-8960", .data = &hdmi_tx_8960_config },
-	{ .compatible = "qcom,hdmi-tx-8660", .data = &hdmi_tx_8660_config },
+	{ .compatible = "qcom,hdmi-tx-8660", .data = &hdmi_tx_8960_config },
 	{}
 };
 
-- 
2.35.1

Re: [PATCH v2 11/12] drm/msm/hdmi: reuse MSM8960's config for MSM8660

[Stephen Boyd]

Quoting Dmitry Baryshkov (2022-06-08 05:07:22)
> MSM8660 requires the same set of clocks and regulators as MSM8960. Reuse
> MSM8960's config for the MSM8660 (8x60).
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Re: [PATCH v2 11/12] drm/msm/hdmi: reuse MSM8960's config for MSM8660

[Stephen Boyd]

Quoting Dmitry Baryshkov (2022-06-08 05:07:22)
> MSM8660 requires the same set of clocks and regulators as MSM8960. Reuse
> MSM8960's config for the MSM8660 (8x60).
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

[PATCH v2 12/12] drm/msm/hdmi-phy: populate 8x60 HDMI PHY requirements

[Dmitry Baryshkov]

Declare that 8x60 HDMI PHY uses the core-vdda regulator and slave_iface
clock (this is the same config as is used by the 8960).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c
index 95f2928cb2cb..1d97640d8c24 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c
@@ -122,8 +122,20 @@ static void hdmi_phy_8x60_powerdown(struct hdmi_phy *phy)
 		       HDMI_8x60_PHY_REG2_PD_DESER);
 }
 
+static const char * const hdmi_phy_8x60_reg_names[] = {
+	"core-vdda",
+};
+
+static const char * const hdmi_phy_8x60_clk_names[] = {
+	"slave_iface",
+};
+
 const struct hdmi_phy_cfg msm_hdmi_phy_8x60_cfg = {
 	.type = MSM_HDMI_PHY_8x60,
 	.powerup = hdmi_phy_8x60_powerup,
 	.powerdown = hdmi_phy_8x60_powerdown,
+	.reg_names = hdmi_phy_8x60_reg_names,
+	.num_regs = ARRAY_SIZE(hdmi_phy_8x60_reg_names),
+	.clk_names = hdmi_phy_8x60_clk_names,
+	.num_clks = ARRAY_SIZE(hdmi_phy_8x60_clk_names),
 };
-- 
2.35.1

[PATCH v2 12/12] drm/msm/hdmi-phy: populate 8x60 HDMI PHY requirements

[Dmitry Baryshkov]

Declare that 8x60 HDMI PHY uses the core-vdda regulator and slave_iface
clock (this is the same config as is used by the 8960).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c
index 95f2928cb2cb..1d97640d8c24 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c
@@ -122,8 +122,20 @@ static void hdmi_phy_8x60_powerdown(struct hdmi_phy *phy)
 		       HDMI_8x60_PHY_REG2_PD_DESER);
 }
 
+static const char * const hdmi_phy_8x60_reg_names[] = {
+	"core-vdda",
+};
+
+static const char * const hdmi_phy_8x60_clk_names[] = {
+	"slave_iface",
+};
+
 const struct hdmi_phy_cfg msm_hdmi_phy_8x60_cfg = {
 	.type = MSM_HDMI_PHY_8x60,
 	.powerup = hdmi_phy_8x60_powerup,
 	.powerdown = hdmi_phy_8x60_powerdown,
+	.reg_names = hdmi_phy_8x60_reg_names,
+	.num_regs = ARRAY_SIZE(hdmi_phy_8x60_reg_names),
+	.clk_names = hdmi_phy_8x60_clk_names,
+	.num_clks = ARRAY_SIZE(hdmi_phy_8x60_clk_names),
 };
-- 
2.35.1

Re: [PATCH v2 12/12] drm/msm/hdmi-phy: populate 8x60 HDMI PHY requirements

[Stephen Boyd]

Quoting Dmitry Baryshkov (2022-06-08 05:07:23)
> Declare that 8x60 HDMI PHY uses the core-vdda regulator and slave_iface
> clock (this is the same config as is used by the 8960).
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Re: [PATCH v2 12/12] drm/msm/hdmi-phy: populate 8x60 HDMI PHY requirements

[Stephen Boyd]

Quoting Dmitry Baryshkov (2022-06-08 05:07:23)
> Declare that 8x60 HDMI PHY uses the core-vdda regulator and slave_iface
> clock (this is the same config as is used by the 8960).
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>