Re: [PATCH v7 2/8] arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node

[Ravi Gunasekaran <r-gunasekaran@ti.com>]

On 22/11/22 3:46 pm, Matt Ranostay wrote:
> Add dt node for the single instance of WIZ (SERDES wrapper) and
> SERDES module shared by PCIe, eDP and USB.
> 
> Signed-off-by: Matt Ranostay <mranostay@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 54 ++++++++++++++++++++++
>  1 file changed, 54 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
> index b4869bff4f22..2858ba589d54 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
> @@ -5,6 +5,17 @@
>   * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
>   */
>  
> +#include <dt-bindings/phy/phy-cadence.h>
> +#include <dt-bindings/phy/phy-ti.h>
> +
> +/ {
> +	serdes_refclk: clock-cmnrefclk {
> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +		clock-frequency = <0>;
> +	};
> +};
> +
>  &cbass_main {
>  	msmc_ram: sram@70000000 {
>  		compatible = "mmio-sram";
> @@ -38,6 +49,13 @@ usb_serdes_mux: mux-controller-0 {
>  			#mux-control-cells = <1>;
>  			mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
>  		};
> +
> +		serdes_ln_ctrl: mux-controller-80 {
> +			compatible = "mmio-mux";
> +			#mux-control-cells = <1>;
> +			mux-reg-masks = <0x80 0x3>, <0x84 0x3>, /* SERDES0 lane0/1 select */
> +					<0x88 0x3>, <0x8c 0x3>; /* SERDES0 lane2/3 select */
> +		};
>  	};
>  
>  	gic500: interrupt-controller@1800000 {
> @@ -787,6 +805,42 @@ usb0: usb@6000000 {
>  		};
>  	};
>  
> +	serdes_wiz0: wiz@5060000 {
> +		compatible = "ti,j721s2-wiz-10g";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		power-domains = <&k3_pds 365 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 365 0>, <&k3_clks 365 3>, <&serdes_refclk>;
> +		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
> +		num-lanes = <4>;
> +		#reset-cells = <1>;
> +		#clock-cells = <1>;
> +		ranges = <0x5060000 0x0 0x5060000 0x10000>;
> +
> +		assigned-clocks = <&k3_clks 365 3>;
> +		assigned-clock-parents = <&k3_clks 365 7>;
> +
> +		serdes0: serdes@5060000 {
> +			compatible = "ti,j721e-serdes-10g";
> +			reg = <0x05060000 0x00010000>;
> +			reg-names = "torrent_phy";
> +			resets = <&serdes_wiz0 0>;
> +			reset-names = "torrent_reset";
> +			clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
> +				 <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>;
> +			clock-names = "refclk", "phy_en_refclk";
> +			assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
> +					  <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>,
> +					  <&serdes_wiz0 TI_WIZ_REFCLK_DIG>;
> +			assigned-clock-parents = <&k3_clks 365 3>,
> +						 <&k3_clks 365 3>,
> +						 <&k3_clks 365 3>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			#clock-cells = <1>;
> +		};
> +	};
> +
>  	main_mcan0: can@2701000 {
>  		compatible = "bosch,m_can";
>  		reg = <0x00 0x02701000 0x00 0x200>,

Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
-- 
Regards,
Ravi

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel