All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vignesh Raghavendra <vigneshr@ti.com>
To: Matt Ranostay <mranostay@ti.com>, <nm@ti.com>, <afd@ti.com>,
	<kristo@kernel.org>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <s-vadapalli@ti.com>,
	<r-gunasekaran@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v7 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI
Date: Mon, 9 Jan 2023 09:40:23 +0530	[thread overview]
Message-ID: <5fcc14ee-2118-ec9c-f89f-25612a2d9a0a@ti.com> (raw)
In-Reply-To: <20221122101616.770050-4-mranostay@ti.com>



On 22/11/22 15:46, Matt Ranostay wrote:
> From: Aswath Govindraju <a-govindraju@ti.com>
> 
> Add support for two instance of OSPI in J721S2 SoC.
> 
> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
> Signed-off-by: Matt Ranostay <mranostay@ti.com>
> ---
>  .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 40 +++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> index 0af242aa9816..a588ab8d867b 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> @@ -306,4 +306,44 @@ cpts@3d000 {
>  			ti,cpts-periodic-outputs = <2>;
>  		};
>  	};
> +
> +	fss: syscon@47000000 {

Node needs to be renamed as bus@<> as the compatible is "simple-bus"

+/workdir/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dtb: syscon@47000000: $nodename:0: 'syscon@47000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'


> +		compatible = "simple-bus";
> +		reg = <0x00 0x47000000 0x00 0x100>;
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		ospi0: spi@47040000 {
> +			compatible = "ti,am654-ospi", "cdns,qspi-nor";
> +			reg = <0x00 0x47040000 0x00 0x100>,
> +			      <0x5 0x0000000 0x1 0x0000000>;
> +			interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
> +			cdns,fifo-depth = <256>;
> +			cdns,fifo-width = <4>;
> +			cdns,trigger-address = <0x0>;
> +			clocks = <&k3_clks 109 5>;
> +			assigned-clocks = <&k3_clks 109 5>;
> +			assigned-clock-parents = <&k3_clks 109 7>;
> +			assigned-clock-rates = <166666666>;
> +			power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +		};
> +
> +		ospi1: spi@47050000 {
> +			compatible = "ti,am654-ospi", "cdns,qspi-nor";
> +			reg = <0x00 0x47050000 0x00 0x100>,
> +			      <0x7 0x0000000 0x1 0x0000000>;
> +			interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
> +			cdns,fifo-depth = <256>;
> +			cdns,fifo-width = <4>;
> +			cdns,trigger-address = <0x0>;
> +			clocks = <&k3_clks 110 5>;
> +			power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +		};
> +
> +	};
>  };

-- 
Regards
Vignesh

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Vignesh Raghavendra <vigneshr@ti.com>
To: Matt Ranostay <mranostay@ti.com>, <nm@ti.com>, <afd@ti.com>,
	<kristo@kernel.org>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <s-vadapalli@ti.com>,
	<r-gunasekaran@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v7 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI
Date: Mon, 9 Jan 2023 09:40:23 +0530	[thread overview]
Message-ID: <5fcc14ee-2118-ec9c-f89f-25612a2d9a0a@ti.com> (raw)
In-Reply-To: <20221122101616.770050-4-mranostay@ti.com>



On 22/11/22 15:46, Matt Ranostay wrote:
> From: Aswath Govindraju <a-govindraju@ti.com>
> 
> Add support for two instance of OSPI in J721S2 SoC.
> 
> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
> Signed-off-by: Matt Ranostay <mranostay@ti.com>
> ---
>  .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 40 +++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> index 0af242aa9816..a588ab8d867b 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> @@ -306,4 +306,44 @@ cpts@3d000 {
>  			ti,cpts-periodic-outputs = <2>;
>  		};
>  	};
> +
> +	fss: syscon@47000000 {

Node needs to be renamed as bus@<> as the compatible is "simple-bus"

+/workdir/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dtb: syscon@47000000: $nodename:0: 'syscon@47000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'


> +		compatible = "simple-bus";
> +		reg = <0x00 0x47000000 0x00 0x100>;
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		ospi0: spi@47040000 {
> +			compatible = "ti,am654-ospi", "cdns,qspi-nor";
> +			reg = <0x00 0x47040000 0x00 0x100>,
> +			      <0x5 0x0000000 0x1 0x0000000>;
> +			interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
> +			cdns,fifo-depth = <256>;
> +			cdns,fifo-width = <4>;
> +			cdns,trigger-address = <0x0>;
> +			clocks = <&k3_clks 109 5>;
> +			assigned-clocks = <&k3_clks 109 5>;
> +			assigned-clock-parents = <&k3_clks 109 7>;
> +			assigned-clock-rates = <166666666>;
> +			power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +		};
> +
> +		ospi1: spi@47050000 {
> +			compatible = "ti,am654-ospi", "cdns,qspi-nor";
> +			reg = <0x00 0x47050000 0x00 0x100>,
> +			      <0x7 0x0000000 0x1 0x0000000>;
> +			interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
> +			cdns,fifo-depth = <256>;
> +			cdns,fifo-width = <4>;
> +			cdns,trigger-address = <0x0>;
> +			clocks = <&k3_clks 110 5>;
> +			power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +		};
> +
> +	};
>  };

-- 
Regards
Vignesh

  parent reply	other threads:[~2023-01-09  4:11 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-22 10:16 [PATCH v7 0/8] arm64: j721s2: Add support for additional IPs Matt Ranostay
2022-11-22 10:16 ` Matt Ranostay
2022-11-22 10:16 ` [PATCH v7 1/8] arm64: dts: ti: k3-j721s2-main: Add support for USB Matt Ranostay
2022-11-22 10:16   ` Matt Ranostay
2023-01-09  4:07   ` Vignesh Raghavendra
2023-01-09  4:07     ` Vignesh Raghavendra
2022-11-22 10:16 ` [PATCH v7 2/8] arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node Matt Ranostay
2022-11-22 10:16   ` Matt Ranostay
2022-11-23 10:35   ` Ravi Gunasekaran
2022-11-23 10:35     ` Ravi Gunasekaran
2023-01-09  4:09   ` Vignesh Raghavendra
2023-01-09  4:09     ` Vignesh Raghavendra
2022-11-22 10:16 ` [PATCH v7 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI Matt Ranostay
2022-11-22 10:16   ` Matt Ranostay
2022-11-22 14:03   ` Vaishnav Achath
2022-11-22 14:03     ` Vaishnav Achath
2022-11-29 17:34   ` Andrew Davis
2022-11-29 17:34     ` Andrew Davis
2023-01-09  4:10   ` Vignesh Raghavendra [this message]
2023-01-09  4:10     ` Vignesh Raghavendra
2022-11-22 10:16 ` [PATCH v7 4/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0 Matt Ranostay
2022-11-22 10:16   ` Matt Ranostay
2022-11-22 10:16 ` [PATCH v7 5/8] arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support Matt Ranostay
2022-11-22 10:16   ` Matt Ranostay
2022-11-22 10:16 ` [PATCH v7 6/8] arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes Matt Ranostay
2022-11-22 10:16   ` Matt Ranostay
2022-11-22 14:04   ` Vaishnav Achath
2022-11-22 14:04     ` Vaishnav Achath
2022-11-22 10:16 ` [PATCH v7 7/8] arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node Matt Ranostay
2022-11-22 10:16   ` Matt Ranostay
2022-11-29 17:53   ` Andrew Davis
2022-11-29 17:53     ` Andrew Davis
     [not found]     ` <20230117092331.GA3277247@desktop-3598>
2023-01-17  9:32       ` Siddharth Vadapalli
2023-01-17  9:32         ` Siddharth Vadapalli
2022-11-22 10:16 ` [PATCH v7 8/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe Matt Ranostay
2022-11-22 10:16   ` Matt Ranostay

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5fcc14ee-2118-ec9c-f89f-25612a2d9a0a@ti.com \
    --to=vigneshr@ti.com \
    --cc=afd@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mranostay@ti.com \
    --cc=nm@ti.com \
    --cc=r-gunasekaran@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=s-vadapalli@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.