From: Andrew Davis <afd@ti.com> To: Matt Ranostay <mranostay@ti.com>, <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>, <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>, <s-vadapalli@ti.com>, <r-gunasekaran@ti.com> Cc: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org> Subject: Re: [PATCH v7 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI Date: Tue, 29 Nov 2022 11:34:28 -0600 [thread overview] Message-ID: <a925a78d-cc36-241b-948e-b506560a9a55@ti.com> (raw) In-Reply-To: <20221122101616.770050-4-mranostay@ti.com> On 11/22/22 4:16 AM, Matt Ranostay wrote: > From: Aswath Govindraju <a-govindraju@ti.com> > > Add support for two instance of OSPI in J721S2 SoC. > > Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> > Signed-off-by: Matt Ranostay <mranostay@ti.com> > --- > .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 40 +++++++++++++++++++ > 1 file changed, 40 insertions(+) > > diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi > index 0af242aa9816..a588ab8d867b 100644 > --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi > @@ -306,4 +306,44 @@ cpts@3d000 { > ti,cpts-periodic-outputs = <2>; > }; > }; > + > + fss: syscon@47000000 { > + compatible = "simple-bus"; > + reg = <0x00 0x47000000 0x00 0x100>; You do not need "reg" property here, "ranges" below takes care of the translations. Andrew > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + ospi0: spi@47040000 { > + compatible = "ti,am654-ospi", "cdns,qspi-nor"; > + reg = <0x00 0x47040000 0x00 0x100>, > + <0x5 0x0000000 0x1 0x0000000>; > + interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>; > + cdns,fifo-depth = <256>; > + cdns,fifo-width = <4>; > + cdns,trigger-address = <0x0>; > + clocks = <&k3_clks 109 5>; > + assigned-clocks = <&k3_clks 109 5>; > + assigned-clock-parents = <&k3_clks 109 7>; > + assigned-clock-rates = <166666666>; > + power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + ospi1: spi@47050000 { > + compatible = "ti,am654-ospi", "cdns,qspi-nor"; > + reg = <0x00 0x47050000 0x00 0x100>, > + <0x7 0x0000000 0x1 0x0000000>; > + interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>; > + cdns,fifo-depth = <256>; > + cdns,fifo-width = <4>; > + cdns,trigger-address = <0x0>; > + clocks = <&k3_clks 110 5>; > + power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + }; > };
WARNING: multiple messages have this Message-ID (diff)
From: Andrew Davis <afd@ti.com> To: Matt Ranostay <mranostay@ti.com>, <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>, <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>, <s-vadapalli@ti.com>, <r-gunasekaran@ti.com> Cc: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org> Subject: Re: [PATCH v7 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI Date: Tue, 29 Nov 2022 11:34:28 -0600 [thread overview] Message-ID: <a925a78d-cc36-241b-948e-b506560a9a55@ti.com> (raw) In-Reply-To: <20221122101616.770050-4-mranostay@ti.com> On 11/22/22 4:16 AM, Matt Ranostay wrote: > From: Aswath Govindraju <a-govindraju@ti.com> > > Add support for two instance of OSPI in J721S2 SoC. > > Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> > Signed-off-by: Matt Ranostay <mranostay@ti.com> > --- > .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 40 +++++++++++++++++++ > 1 file changed, 40 insertions(+) > > diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi > index 0af242aa9816..a588ab8d867b 100644 > --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi > @@ -306,4 +306,44 @@ cpts@3d000 { > ti,cpts-periodic-outputs = <2>; > }; > }; > + > + fss: syscon@47000000 { > + compatible = "simple-bus"; > + reg = <0x00 0x47000000 0x00 0x100>; You do not need "reg" property here, "ranges" below takes care of the translations. Andrew > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + ospi0: spi@47040000 { > + compatible = "ti,am654-ospi", "cdns,qspi-nor"; > + reg = <0x00 0x47040000 0x00 0x100>, > + <0x5 0x0000000 0x1 0x0000000>; > + interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>; > + cdns,fifo-depth = <256>; > + cdns,fifo-width = <4>; > + cdns,trigger-address = <0x0>; > + clocks = <&k3_clks 109 5>; > + assigned-clocks = <&k3_clks 109 5>; > + assigned-clock-parents = <&k3_clks 109 7>; > + assigned-clock-rates = <166666666>; > + power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + ospi1: spi@47050000 { > + compatible = "ti,am654-ospi", "cdns,qspi-nor"; > + reg = <0x00 0x47050000 0x00 0x100>, > + <0x7 0x0000000 0x1 0x0000000>; > + interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>; > + cdns,fifo-depth = <256>; > + cdns,fifo-width = <4>; > + cdns,trigger-address = <0x0>; > + clocks = <&k3_clks 110 5>; > + power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + }; > }; _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-11-29 17:34 UTC|newest] Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-11-22 10:16 [PATCH v7 0/8] arm64: j721s2: Add support for additional IPs Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay 2022-11-22 10:16 ` [PATCH v7 1/8] arm64: dts: ti: k3-j721s2-main: Add support for USB Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay 2023-01-09 4:07 ` Vignesh Raghavendra 2023-01-09 4:07 ` Vignesh Raghavendra 2022-11-22 10:16 ` [PATCH v7 2/8] arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay 2022-11-23 10:35 ` Ravi Gunasekaran 2022-11-23 10:35 ` Ravi Gunasekaran 2023-01-09 4:09 ` Vignesh Raghavendra 2023-01-09 4:09 ` Vignesh Raghavendra 2022-11-22 10:16 ` [PATCH v7 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay 2022-11-22 14:03 ` Vaishnav Achath 2022-11-22 14:03 ` Vaishnav Achath 2022-11-29 17:34 ` Andrew Davis [this message] 2022-11-29 17:34 ` Andrew Davis 2023-01-09 4:10 ` Vignesh Raghavendra 2023-01-09 4:10 ` Vignesh Raghavendra 2022-11-22 10:16 ` [PATCH v7 4/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0 Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay 2022-11-22 10:16 ` [PATCH v7 5/8] arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay 2022-11-22 10:16 ` [PATCH v7 6/8] arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay 2022-11-22 14:04 ` Vaishnav Achath 2022-11-22 14:04 ` Vaishnav Achath 2022-11-22 10:16 ` [PATCH v7 7/8] arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay 2022-11-29 17:53 ` Andrew Davis 2022-11-29 17:53 ` Andrew Davis [not found] ` <20230117092331.GA3277247@desktop-3598> 2023-01-17 9:32 ` Siddharth Vadapalli 2023-01-17 9:32 ` Siddharth Vadapalli 2022-11-22 10:16 ` [PATCH v7 8/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=a925a78d-cc36-241b-948e-b506560a9a55@ti.com \ --to=afd@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=kristo@kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mranostay@ti.com \ --cc=nm@ti.com \ --cc=r-gunasekaran@ti.com \ --cc=robh+dt@kernel.org \ --cc=s-vadapalli@ti.com \ --cc=vigneshr@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.