[PATCH 0/3] staging: rtl8723bs: remove useless files

[PATCH 0/3] staging: rtl8723bs: remove useless files

[Nam Cao]

Delete odm_NoiseMonitor.c and odm_NoiseMonitor.h because they are
useless. The first 2 commits are preparation, and the final commit is
actual removal.

Nam Cao (3):
  staging: rtl8723bs: remove unused function ODM_InbandNoise_Monitor
  staging: rtl8723bs: remove member noise_level from struct dm_odm_t
  staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c

 drivers/staging/rtl8723bs/hal/odm.h           |   2 -
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.c  | 130 ------------------
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.h  |  39 ------
 drivers/staging/rtl8723bs/hal/odm_precomp.h   |   1 -
 4 files changed, 172 deletions(-)
 delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
 delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h

-- 
2.25.1

[PATCH 1/3] staging: rtl8723bs: remove unused function ODM_InbandNoise_Monitor

[Nam Cao]

because this function is not used. Also remove function
odm_InbandNoise_Monitor_NSeries because it is a static function
which is only called from ODM_InbandNoise_Monitor.

Signed-off-by: Nam Cao <namcaov@gmail.com>
---
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.c  | 111 ------------------
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.h  |   7 --
 2 files changed, 118 deletions(-)

diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
index 392cc8a398f5..b85b323cf5bd 100644
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
+++ b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
@@ -17,114 +17,3 @@
 #define Valid_Min				-35
 #define Valid_Max			10
 #define ValidCnt				5
-
-static s16 odm_InbandNoise_Monitor_NSeries(
-	struct dm_odm_t *pDM_Odm,
-	u8 bPauseDIG,
-	u8 IGIValue,
-	u32 max_time
-)
-{
-	u32 tmp4b;
-	u8 max_rf_path = 0, rf_path;
-	u8 reg_c50, reg_c58, valid_done = 0;
-	struct noise_level noise_data;
-	u32 start  = 0;
-
-	pDM_Odm->noise_level.noise_all = 0;
-
-	max_rf_path = 1;
-
-	memset(&noise_data, 0, sizeof(struct noise_level));
-
-	/*  */
-	/*  Step 1. Disable DIG && Set initial gain. */
-	/*  */
-
-	if (bPauseDIG)
-		odm_PauseDIG(pDM_Odm, ODM_PAUSE_DIG, IGIValue);
-	/*  */
-	/*  Step 2. Disable all power save for read registers */
-	/*  */
-	/* dcmd_DebugControlPowerSave(padapter, PSDisable); */
-
-	/*  */
-	/*  Step 3. Get noise power level */
-	/*  */
-	start = jiffies;
-	while (1) {
-
-		/* Stop updating idle time pwer report (for driver read) */
-		PHY_SetBBReg(pDM_Odm->Adapter, rFPGA0_TxGainStage, BIT25, 1);
-
-		/* Read Noise Floor Report */
-		tmp4b = PHY_QueryBBReg(pDM_Odm->Adapter, 0x8f8, bMaskDWord);
-
-		/* PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_XAAGCCore1, bMaskByte0, TestInitialGain); */
-		/* if (max_rf_path == 2) */
-		/* PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_XBAGCCore1, bMaskByte0, TestInitialGain); */
-
-		/* update idle time pwer report per 5us */
-		PHY_SetBBReg(pDM_Odm->Adapter, rFPGA0_TxGainStage, BIT25, 0);
-
-		noise_data.value[RF_PATH_A] = (u8)(tmp4b&0xff);
-		noise_data.value[RF_PATH_B]  = (u8)((tmp4b&0xff00)>>8);
-
-		for (rf_path = RF_PATH_A; rf_path < max_rf_path; rf_path++) {
-			noise_data.sval[rf_path] = (s8)noise_data.value[rf_path];
-			noise_data.sval[rf_path] /= 2;
-		}
-		/* mdelay(10); */
-		/* msleep(10); */
-
-		for (rf_path = RF_PATH_A; rf_path < max_rf_path; rf_path++) {
-			if ((noise_data.valid_cnt[rf_path] < ValidCnt) && (noise_data.sval[rf_path] < Valid_Max && noise_data.sval[rf_path] >= Valid_Min)) {
-				noise_data.valid_cnt[rf_path]++;
-				noise_data.sum[rf_path] += noise_data.sval[rf_path];
-				if (noise_data.valid_cnt[rf_path] == ValidCnt) {
-					valid_done++;
-				}
-
-			}
-
-		}
-
-		/* printk("####### valid_done:%d #############\n", valid_done); */
-		if ((valid_done == max_rf_path) || (jiffies_to_msecs(jiffies - start) > max_time)) {
-			for (rf_path = RF_PATH_A; rf_path < max_rf_path; rf_path++) {
-				/* printk("%s PATH_%d - sum = %d, valid_cnt = %d\n", __func__, rf_path, noise_data.sum[rf_path], noise_data.valid_cnt[rf_path]); */
-				if (noise_data.valid_cnt[rf_path])
-					noise_data.sum[rf_path] /= noise_data.valid_cnt[rf_path];
-				else
-					noise_data.sum[rf_path]  = 0;
-			}
-			break;
-		}
-	}
-	reg_c50 = (s32)PHY_QueryBBReg(pDM_Odm->Adapter, rOFDM0_XAAGCCore1, bMaskByte0);
-	reg_c50 &= ~BIT7;
-	pDM_Odm->noise_level.noise[RF_PATH_A] = -110 + reg_c50 + noise_data.sum[RF_PATH_A];
-	pDM_Odm->noise_level.noise_all += pDM_Odm->noise_level.noise[RF_PATH_A];
-
-	if (max_rf_path == 2) {
-		reg_c58 = (s32)PHY_QueryBBReg(pDM_Odm->Adapter, rOFDM0_XBAGCCore1, bMaskByte0);
-		reg_c58 &= ~BIT7;
-		pDM_Odm->noise_level.noise[RF_PATH_B] = -110 + reg_c58 + noise_data.sum[RF_PATH_B];
-		pDM_Odm->noise_level.noise_all += pDM_Odm->noise_level.noise[RF_PATH_B];
-	}
-	pDM_Odm->noise_level.noise_all /= max_rf_path;
-
-	/*  */
-	/*  Step 4. Recover the Dig */
-	/*  */
-	if (bPauseDIG)
-		odm_PauseDIG(pDM_Odm, ODM_RESUME_DIG, IGIValue);
-
-	return pDM_Odm->noise_level.noise_all;
-
-}
-
-s16 ODM_InbandNoise_Monitor(void *pDM_VOID, u8 bPauseDIG, u8 IGIValue, u32 max_time)
-{
-	return odm_InbandNoise_Monitor_NSeries(pDM_VOID, bPauseDIG, IGIValue, max_time);
-}
diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
index ab114543f39c..01c5c524d4e0 100644
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
+++ b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
@@ -29,11 +29,4 @@ struct odm_noise_monitor {
 	s16 noise_all;
 };
 
-s16 ODM_InbandNoise_Monitor(
-	void *pDM_VOID,
-	u8 bPauseDIG,
-	u8 IGIValue,
-	u32 max_time
-);
-
 #endif
-- 
2.25.1

[PATCH 2/3] staging: rtl8723bs: remove member noise_level from struct dm_odm_t

[Nam Cao]

because it is not used.

Signed-off-by: Nam Cao <namcaov@gmail.com>
---
 drivers/staging/rtl8723bs/hal/odm.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/staging/rtl8723bs/hal/odm.h b/drivers/staging/rtl8723bs/hal/odm.h
index 19cfc2915458..033f22b0f394 100644
--- a/drivers/staging/rtl8723bs/hal/odm.h
+++ b/drivers/staging/rtl8723bs/hal/odm.h
@@ -863,7 +863,6 @@ struct dm_odm_t { /* DM_Out_Source_Dynamic_Mechanism_Structure */
 	u8 Adaptivity_IGI_upper;
 	u8 NHM_cnt_0;
 
-	struct odm_noise_monitor noise_level;/* ODM_MAX_CHANNEL_NUM]; */
 	/*  */
 	/* 2 Define STA info. */
 	/*  _ODM_STA_INFO */
-- 
2.25.1

[PATCH 3/3] staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c

[Nam Cao]

because the content of these files is not used.

Signed-off-by: Nam Cao <namcaov@gmail.com>
---
 drivers/staging/rtl8723bs/hal/odm.h           |  1 -
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.c  | 19 -----------
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.h  | 32 -------------------
 drivers/staging/rtl8723bs/hal/odm_precomp.h   |  1 -
 4 files changed, 53 deletions(-)
 delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
 delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h

diff --git a/drivers/staging/rtl8723bs/hal/odm.h b/drivers/staging/rtl8723bs/hal/odm.h
index 033f22b0f394..fe9782d2d4fd 100644
--- a/drivers/staging/rtl8723bs/hal/odm.h
+++ b/drivers/staging/rtl8723bs/hal/odm.h
@@ -14,7 +14,6 @@
 #include "odm_DynamicBBPowerSaving.h"
 #include "odm_DynamicTxPower.h"
 #include "odm_CfoTracking.h"
-#include "odm_NoiseMonitor.h"
 
 #define	TP_MODE		0
 #define	RSSI_MODE		1
diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
deleted file mode 100644
index b85b323cf5bd..000000000000
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- ******************************************************************************/
-
-#include "odm_precomp.h"
-
-/*  This function is for inband noise test utility only */
-/*  To obtain the inband noise level(dbm), do the following. */
-/*  1. disable DIG and Power Saving */
-/*  2. Set initial gain = 0x1a */
-/*  3. Stop updating idle time pwer report (for driver read) */
-/* - 0x80c[25] */
-
-#define Valid_Min				-35
-#define Valid_Max			10
-#define ValidCnt				5
diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
deleted file mode 100644
index 01c5c524d4e0..000000000000
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- *****************************************************************************/
-#ifndef	__ODMNOISEMONITOR_H__
-#define __ODMNOISEMONITOR_H__
-
-#define	ODM_MAX_CHANNEL_NUM					38/* 14+24 */
-struct noise_level {
-	/* u8 value_a, value_b; */
-	u8 value[MAX_RF_PATH];
-	/* s8 sval_a, sval_b; */
-	s8 sval[MAX_RF_PATH];
-
-	/* s32 noise_a = 0, noise_b = 0, sum_a = 0, sum_b = 0; */
-	/* s32 noise[ODM_RF_PATH_MAX]; */
-	s32 sum[MAX_RF_PATH];
-	/* u8 valid_cnt_a = 0, valid_cnt_b = 0, */
-	u8 valid[MAX_RF_PATH];
-	u8 valid_cnt[MAX_RF_PATH];
-
-};
-
-
-struct odm_noise_monitor {
-	s8 noise[MAX_RF_PATH];
-	s16 noise_all;
-};
-
-#endif
diff --git a/drivers/staging/rtl8723bs/hal/odm_precomp.h b/drivers/staging/rtl8723bs/hal/odm_precomp.h
index edce506022a5..2987857a8761 100644
--- a/drivers/staging/rtl8723bs/hal/odm_precomp.h
+++ b/drivers/staging/rtl8723bs/hal/odm_precomp.h
@@ -33,7 +33,6 @@
 #include "odm_DynamicBBPowerSaving.h"
 #include "odm_DynamicTxPower.h"
 #include "odm_CfoTracking.h"
-#include "odm_NoiseMonitor.h"
 #include "HalPhyRf.h"
 #include "HalPhyRf_8723B.h"/* for IQK, LCK, Power-tracking */
 #include "rtl8723b_hal.h"
-- 
2.25.1

Re: [PATCH 3/3] staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c

[kernel test robot]

Hi Nam,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on staging/staging-testing]

url:    https://github.com/intel-lab-lkp/linux/commits/Nam-Cao/staging-rtl8723bs-remove-useless-files/20220819-173916
base:   https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git 8379cf83fe6d57a12952de6dcaf7a7fbd7b364fc
config: i386-randconfig-a005 (https://download.01.org/0day-ci/archive/20220820/202208200447.kdEhBy9a-lkp@intel.com/config)
compiler: gcc-11 (Debian 11.3.0-5) 11.3.0
reproduce (this is a W=1 build):
        # https://github.com/intel-lab-lkp/linux/commit/0fdeb2305c40b79975f2c6b683ee5225b3aedf08
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Nam-Cao/staging-rtl8723bs-remove-useless-files/20220819-173916
        git checkout 0fdeb2305c40b79975f2c6b683ee5225b3aedf08
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        make W=1 O=build_dir ARCH=i386 SHELL=/bin/bash M=drivers/staging

If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

>> make[3]: *** No rule to make target 'drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.o', needed by 'drivers/staging/rtl8723bs/r8723bs.o'.
   make[3]: Target '__build' not remade because of errors.

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

[PATCH v2 0/4] remove useless files

[Nam Cao]

Delete odm_NoiseMonitor.c and odm_NoiseMonitor.h because they are
useless. The first 2 commits are preparation, and the final commit is
actual removal.

v2: Add new patch to remove the file from Makefile, otherwise there is
build error as reported by kernel test bot.

Nam Cao (4):
  staging: rtl8723bs: remove unused function ODM_InbandNoise_Monitor
  staging: rtl8723bs: remove member noise_level from struct dm_odm_t
  staging: rtl8723bs: remove odm_NoiseMonitor.o from Makefile
  staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c

 drivers/staging/rtl8723bs/Makefile            |   1 -
 drivers/staging/rtl8723bs/hal/odm.h           |   2 -
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.c  | 130 ------------------
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.h  |  39 ------
 drivers/staging/rtl8723bs/hal/odm_precomp.h   |   1 -
 5 files changed, 173 deletions(-)
 delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
 delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h

-- 
2.25.1

[PATCH v2 0/4] remove useless files

[Nam Cao]

[-- Attachment #1: Type: text/plain, Size: 1060 bytes --]

Delete odm_NoiseMonitor.c and odm_NoiseMonitor.h because they are
useless. The first 2 commits are preparation, and the final commit is
actual removal.

v2: Add new patch to remove the file from Makefile, otherwise there is
build error as reported by kernel test bot.

Nam Cao (4):
  staging: rtl8723bs: remove unused function ODM_InbandNoise_Monitor
  staging: rtl8723bs: remove member noise_level from struct dm_odm_t
  staging: rtl8723bs: remove odm_NoiseMonitor.o from Makefile
  staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c

 drivers/staging/rtl8723bs/Makefile            |   1 -
 drivers/staging/rtl8723bs/hal/odm.h           |   2 -
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.c  | 130 ------------------
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.h  |  39 ------
 drivers/staging/rtl8723bs/hal/odm_precomp.h   |   1 -
 5 files changed, 173 deletions(-)
 delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
 delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h

-- 
2.25.1

[PATCH v2 1/4] staging: rtl8723bs: remove unused function ODM_InbandNoise_Monitor

[Nam Cao]

because this function is not used. Also remove function
odm_InbandNoise_Monitor_NSeries because it is a static function
which is only called from ODM_InbandNoise_Monitor.

Signed-off-by: Nam Cao <namcaov@gmail.com>
---
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.c  | 111 ------------------
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.h  |   7 --
 2 files changed, 118 deletions(-)

diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
index 392cc8a398f5..b85b323cf5bd 100644
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
+++ b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
@@ -17,114 +17,3 @@
 #define Valid_Min				-35
 #define Valid_Max			10
 #define ValidCnt				5
-
-static s16 odm_InbandNoise_Monitor_NSeries(
-	struct dm_odm_t *pDM_Odm,
-	u8 bPauseDIG,
-	u8 IGIValue,
-	u32 max_time
-)
-{
-	u32 tmp4b;
-	u8 max_rf_path = 0, rf_path;
-	u8 reg_c50, reg_c58, valid_done = 0;
-	struct noise_level noise_data;
-	u32 start  = 0;
-
-	pDM_Odm->noise_level.noise_all = 0;
-
-	max_rf_path = 1;
-
-	memset(&noise_data, 0, sizeof(struct noise_level));
-
-	/*  */
-	/*  Step 1. Disable DIG && Set initial gain. */
-	/*  */
-
-	if (bPauseDIG)
-		odm_PauseDIG(pDM_Odm, ODM_PAUSE_DIG, IGIValue);
-	/*  */
-	/*  Step 2. Disable all power save for read registers */
-	/*  */
-	/* dcmd_DebugControlPowerSave(padapter, PSDisable); */
-
-	/*  */
-	/*  Step 3. Get noise power level */
-	/*  */
-	start = jiffies;
-	while (1) {
-
-		/* Stop updating idle time pwer report (for driver read) */
-		PHY_SetBBReg(pDM_Odm->Adapter, rFPGA0_TxGainStage, BIT25, 1);
-
-		/* Read Noise Floor Report */
-		tmp4b = PHY_QueryBBReg(pDM_Odm->Adapter, 0x8f8, bMaskDWord);
-
-		/* PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_XAAGCCore1, bMaskByte0, TestInitialGain); */
-		/* if (max_rf_path == 2) */
-		/* PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_XBAGCCore1, bMaskByte0, TestInitialGain); */
-
-		/* update idle time pwer report per 5us */
-		PHY_SetBBReg(pDM_Odm->Adapter, rFPGA0_TxGainStage, BIT25, 0);
-
-		noise_data.value[RF_PATH_A] = (u8)(tmp4b&0xff);
-		noise_data.value[RF_PATH_B]  = (u8)((tmp4b&0xff00)>>8);
-
-		for (rf_path = RF_PATH_A; rf_path < max_rf_path; rf_path++) {
-			noise_data.sval[rf_path] = (s8)noise_data.value[rf_path];
-			noise_data.sval[rf_path] /= 2;
-		}
-		/* mdelay(10); */
-		/* msleep(10); */
-
-		for (rf_path = RF_PATH_A; rf_path < max_rf_path; rf_path++) {
-			if ((noise_data.valid_cnt[rf_path] < ValidCnt) && (noise_data.sval[rf_path] < Valid_Max && noise_data.sval[rf_path] >= Valid_Min)) {
-				noise_data.valid_cnt[rf_path]++;
-				noise_data.sum[rf_path] += noise_data.sval[rf_path];
-				if (noise_data.valid_cnt[rf_path] == ValidCnt) {
-					valid_done++;
-				}
-
-			}
-
-		}
-
-		/* printk("####### valid_done:%d #############\n", valid_done); */
-		if ((valid_done == max_rf_path) || (jiffies_to_msecs(jiffies - start) > max_time)) {
-			for (rf_path = RF_PATH_A; rf_path < max_rf_path; rf_path++) {
-				/* printk("%s PATH_%d - sum = %d, valid_cnt = %d\n", __func__, rf_path, noise_data.sum[rf_path], noise_data.valid_cnt[rf_path]); */
-				if (noise_data.valid_cnt[rf_path])
-					noise_data.sum[rf_path] /= noise_data.valid_cnt[rf_path];
-				else
-					noise_data.sum[rf_path]  = 0;
-			}
-			break;
-		}
-	}
-	reg_c50 = (s32)PHY_QueryBBReg(pDM_Odm->Adapter, rOFDM0_XAAGCCore1, bMaskByte0);
-	reg_c50 &= ~BIT7;
-	pDM_Odm->noise_level.noise[RF_PATH_A] = -110 + reg_c50 + noise_data.sum[RF_PATH_A];
-	pDM_Odm->noise_level.noise_all += pDM_Odm->noise_level.noise[RF_PATH_A];
-
-	if (max_rf_path == 2) {
-		reg_c58 = (s32)PHY_QueryBBReg(pDM_Odm->Adapter, rOFDM0_XBAGCCore1, bMaskByte0);
-		reg_c58 &= ~BIT7;
-		pDM_Odm->noise_level.noise[RF_PATH_B] = -110 + reg_c58 + noise_data.sum[RF_PATH_B];
-		pDM_Odm->noise_level.noise_all += pDM_Odm->noise_level.noise[RF_PATH_B];
-	}
-	pDM_Odm->noise_level.noise_all /= max_rf_path;
-
-	/*  */
-	/*  Step 4. Recover the Dig */
-	/*  */
-	if (bPauseDIG)
-		odm_PauseDIG(pDM_Odm, ODM_RESUME_DIG, IGIValue);
-
-	return pDM_Odm->noise_level.noise_all;
-
-}
-
-s16 ODM_InbandNoise_Monitor(void *pDM_VOID, u8 bPauseDIG, u8 IGIValue, u32 max_time)
-{
-	return odm_InbandNoise_Monitor_NSeries(pDM_VOID, bPauseDIG, IGIValue, max_time);
-}
diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
index ab114543f39c..01c5c524d4e0 100644
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
+++ b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
@@ -29,11 +29,4 @@ struct odm_noise_monitor {
 	s16 noise_all;
 };
 
-s16 ODM_InbandNoise_Monitor(
-	void *pDM_VOID,
-	u8 bPauseDIG,
-	u8 IGIValue,
-	u32 max_time
-);
-
 #endif
-- 
2.25.1

[PATCH v2 1/4] staging: rtl8723bs: remove unused function ODM_InbandNoise_Monitor

[Nam Cao]

[-- Attachment #1: Type: text/plain, Size: 4850 bytes --]

because this function is not used. Also remove function
odm_InbandNoise_Monitor_NSeries because it is a static function
which is only called from ODM_InbandNoise_Monitor.

Signed-off-by: Nam Cao <namcaov@gmail.com>
---
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.c  | 111 ------------------
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.h  |   7 --
 2 files changed, 118 deletions(-)

diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
index 392cc8a398f5..b85b323cf5bd 100644
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
+++ b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
@@ -17,114 +17,3 @@
 #define Valid_Min				-35
 #define Valid_Max			10
 #define ValidCnt				5
-
-static s16 odm_InbandNoise_Monitor_NSeries(
-	struct dm_odm_t *pDM_Odm,
-	u8 bPauseDIG,
-	u8 IGIValue,
-	u32 max_time
-)
-{
-	u32 tmp4b;
-	u8 max_rf_path = 0, rf_path;
-	u8 reg_c50, reg_c58, valid_done = 0;
-	struct noise_level noise_data;
-	u32 start  = 0;
-
-	pDM_Odm->noise_level.noise_all = 0;
-
-	max_rf_path = 1;
-
-	memset(&noise_data, 0, sizeof(struct noise_level));
-
-	/*  */
-	/*  Step 1. Disable DIG && Set initial gain. */
-	/*  */
-
-	if (bPauseDIG)
-		odm_PauseDIG(pDM_Odm, ODM_PAUSE_DIG, IGIValue);
-	/*  */
-	/*  Step 2. Disable all power save for read registers */
-	/*  */
-	/* dcmd_DebugControlPowerSave(padapter, PSDisable); */
-
-	/*  */
-	/*  Step 3. Get noise power level */
-	/*  */
-	start = jiffies;
-	while (1) {
-
-		/* Stop updating idle time pwer report (for driver read) */
-		PHY_SetBBReg(pDM_Odm->Adapter, rFPGA0_TxGainStage, BIT25, 1);
-
-		/* Read Noise Floor Report */
-		tmp4b = PHY_QueryBBReg(pDM_Odm->Adapter, 0x8f8, bMaskDWord);
-
-		/* PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_XAAGCCore1, bMaskByte0, TestInitialGain); */
-		/* if (max_rf_path == 2) */
-		/* PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_XBAGCCore1, bMaskByte0, TestInitialGain); */
-
-		/* update idle time pwer report per 5us */
-		PHY_SetBBReg(pDM_Odm->Adapter, rFPGA0_TxGainStage, BIT25, 0);
-
-		noise_data.value[RF_PATH_A] = (u8)(tmp4b&0xff);
-		noise_data.value[RF_PATH_B]  = (u8)((tmp4b&0xff00)>>8);
-
-		for (rf_path = RF_PATH_A; rf_path < max_rf_path; rf_path++) {
-			noise_data.sval[rf_path] = (s8)noise_data.value[rf_path];
-			noise_data.sval[rf_path] /= 2;
-		}
-		/* mdelay(10); */
-		/* msleep(10); */
-
-		for (rf_path = RF_PATH_A; rf_path < max_rf_path; rf_path++) {
-			if ((noise_data.valid_cnt[rf_path] < ValidCnt) && (noise_data.sval[rf_path] < Valid_Max && noise_data.sval[rf_path] >= Valid_Min)) {
-				noise_data.valid_cnt[rf_path]++;
-				noise_data.sum[rf_path] += noise_data.sval[rf_path];
-				if (noise_data.valid_cnt[rf_path] == ValidCnt) {
-					valid_done++;
-				}
-
-			}
-
-		}
-
-		/* printk("####### valid_done:%d #############\n", valid_done); */
-		if ((valid_done == max_rf_path) || (jiffies_to_msecs(jiffies - start) > max_time)) {
-			for (rf_path = RF_PATH_A; rf_path < max_rf_path; rf_path++) {
-				/* printk("%s PATH_%d - sum = %d, valid_cnt = %d\n", __func__, rf_path, noise_data.sum[rf_path], noise_data.valid_cnt[rf_path]); */
-				if (noise_data.valid_cnt[rf_path])
-					noise_data.sum[rf_path] /= noise_data.valid_cnt[rf_path];
-				else
-					noise_data.sum[rf_path]  = 0;
-			}
-			break;
-		}
-	}
-	reg_c50 = (s32)PHY_QueryBBReg(pDM_Odm->Adapter, rOFDM0_XAAGCCore1, bMaskByte0);
-	reg_c50 &= ~BIT7;
-	pDM_Odm->noise_level.noise[RF_PATH_A] = -110 + reg_c50 + noise_data.sum[RF_PATH_A];
-	pDM_Odm->noise_level.noise_all += pDM_Odm->noise_level.noise[RF_PATH_A];
-
-	if (max_rf_path == 2) {
-		reg_c58 = (s32)PHY_QueryBBReg(pDM_Odm->Adapter, rOFDM0_XBAGCCore1, bMaskByte0);
-		reg_c58 &= ~BIT7;
-		pDM_Odm->noise_level.noise[RF_PATH_B] = -110 + reg_c58 + noise_data.sum[RF_PATH_B];
-		pDM_Odm->noise_level.noise_all += pDM_Odm->noise_level.noise[RF_PATH_B];
-	}
-	pDM_Odm->noise_level.noise_all /= max_rf_path;
-
-	/*  */
-	/*  Step 4. Recover the Dig */
-	/*  */
-	if (bPauseDIG)
-		odm_PauseDIG(pDM_Odm, ODM_RESUME_DIG, IGIValue);
-
-	return pDM_Odm->noise_level.noise_all;
-
-}
-
-s16 ODM_InbandNoise_Monitor(void *pDM_VOID, u8 bPauseDIG, u8 IGIValue, u32 max_time)
-{
-	return odm_InbandNoise_Monitor_NSeries(pDM_VOID, bPauseDIG, IGIValue, max_time);
-}
diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
index ab114543f39c..01c5c524d4e0 100644
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
+++ b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
@@ -29,11 +29,4 @@ struct odm_noise_monitor {
 	s16 noise_all;
 };
 
-s16 ODM_InbandNoise_Monitor(
-	void *pDM_VOID,
-	u8 bPauseDIG,
-	u8 IGIValue,
-	u32 max_time
-);
-
 #endif
-- 
2.25.1

[PATCH v2 2/4] staging: rtl8723bs: remove member noise_level from struct dm_odm_t

[Nam Cao]

because it is not used.

Signed-off-by: Nam Cao <namcaov@gmail.com>
---
 drivers/staging/rtl8723bs/hal/odm.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/staging/rtl8723bs/hal/odm.h b/drivers/staging/rtl8723bs/hal/odm.h
index 19cfc2915458..033f22b0f394 100644
--- a/drivers/staging/rtl8723bs/hal/odm.h
+++ b/drivers/staging/rtl8723bs/hal/odm.h
@@ -863,7 +863,6 @@ struct dm_odm_t { /* DM_Out_Source_Dynamic_Mechanism_Structure */
 	u8 Adaptivity_IGI_upper;
 	u8 NHM_cnt_0;
 
-	struct odm_noise_monitor noise_level;/* ODM_MAX_CHANNEL_NUM]; */
 	/*  */
 	/* 2 Define STA info. */
 	/*  _ODM_STA_INFO */
-- 
2.25.1

[PATCH v2 2/4] staging: rtl8723bs: remove member noise_level from struct dm_odm_t

[Nam Cao]

[-- Attachment #1: Type: text/plain, Size: 647 bytes --]

because it is not used.

Signed-off-by: Nam Cao <namcaov@gmail.com>
---
 drivers/staging/rtl8723bs/hal/odm.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/staging/rtl8723bs/hal/odm.h b/drivers/staging/rtl8723bs/hal/odm.h
index 19cfc2915458..033f22b0f394 100644
--- a/drivers/staging/rtl8723bs/hal/odm.h
+++ b/drivers/staging/rtl8723bs/hal/odm.h
@@ -863,7 +863,6 @@ struct dm_odm_t { /* DM_Out_Source_Dynamic_Mechanism_Structure */
 	u8 Adaptivity_IGI_upper;
 	u8 NHM_cnt_0;
 
-	struct odm_noise_monitor noise_level;/* ODM_MAX_CHANNEL_NUM]; */
 	/*  */
 	/* 2 Define STA info. */
 	/*  _ODM_STA_INFO */
-- 
2.25.1

[PATCH v2 3/4] staging: rtl8723bs: remove odm_NoiseMonitor.o from Makefile

[Nam Cao]

This is preparation to delete odm_NoiseMonitor.c and
odm_NoiseMonitor.h because these files are useless.

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-staging/202208200447.kdEhBy9a-lkp@intel.com/
Signed-off-by: Nam Cao <namcaov@gmail.com>
---
 drivers/staging/rtl8723bs/Makefile | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/staging/rtl8723bs/Makefile b/drivers/staging/rtl8723bs/Makefile
index 159ca1b9016b..bc7ff1dd14f9 100644
--- a/drivers/staging/rtl8723bs/Makefile
+++ b/drivers/staging/rtl8723bs/Makefile
@@ -33,7 +33,6 @@ r8723bs-y = \
 		hal/odm_DynamicTxPower.o \
 		hal/odm_EdcaTurboCheck.o \
 		hal/odm_HWConfig.o \
-		hal/odm_NoiseMonitor.o \
 		hal/odm_RegConfig8723B.o \
 		hal/rtl8723b_cmd.o \
 		hal/rtl8723b_dm.o \
-- 
2.25.1

[PATCH v2 3/4] staging: rtl8723bs: remove odm_NoiseMonitor.o from Makefile

[Nam Cao]

[-- Attachment #1: Type: text/plain, Size: 820 bytes --]

This is preparation to delete odm_NoiseMonitor.c and
odm_NoiseMonitor.h because these files are useless.

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-staging/202208200447.kdEhBy9a-lkp(a)intel.com/
Signed-off-by: Nam Cao <namcaov@gmail.com>
---
 drivers/staging/rtl8723bs/Makefile | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/staging/rtl8723bs/Makefile b/drivers/staging/rtl8723bs/Makefile
index 159ca1b9016b..bc7ff1dd14f9 100644
--- a/drivers/staging/rtl8723bs/Makefile
+++ b/drivers/staging/rtl8723bs/Makefile
@@ -33,7 +33,6 @@ r8723bs-y = \
 		hal/odm_DynamicTxPower.o \
 		hal/odm_EdcaTurboCheck.o \
 		hal/odm_HWConfig.o \
-		hal/odm_NoiseMonitor.o \
 		hal/odm_RegConfig8723B.o \
 		hal/rtl8723b_cmd.o \
 		hal/rtl8723b_dm.o \
-- 
2.25.1

[PATCH v2 4/4] staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c

[Nam Cao]

because the content of these files is not used.

Signed-off-by: Nam Cao <namcaov@gmail.com>
---
 drivers/staging/rtl8723bs/hal/odm.h           |  1 -
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.c  | 19 -----------
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.h  | 32 -------------------
 drivers/staging/rtl8723bs/hal/odm_precomp.h   |  1 -
 4 files changed, 53 deletions(-)
 delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
 delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h

diff --git a/drivers/staging/rtl8723bs/hal/odm.h b/drivers/staging/rtl8723bs/hal/odm.h
index 033f22b0f394..fe9782d2d4fd 100644
--- a/drivers/staging/rtl8723bs/hal/odm.h
+++ b/drivers/staging/rtl8723bs/hal/odm.h
@@ -14,7 +14,6 @@
 #include "odm_DynamicBBPowerSaving.h"
 #include "odm_DynamicTxPower.h"
 #include "odm_CfoTracking.h"
-#include "odm_NoiseMonitor.h"
 
 #define	TP_MODE		0
 #define	RSSI_MODE		1
diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
deleted file mode 100644
index b85b323cf5bd..000000000000
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- ******************************************************************************/
-
-#include "odm_precomp.h"
-
-/*  This function is for inband noise test utility only */
-/*  To obtain the inband noise level(dbm), do the following. */
-/*  1. disable DIG and Power Saving */
-/*  2. Set initial gain = 0x1a */
-/*  3. Stop updating idle time pwer report (for driver read) */
-/* - 0x80c[25] */
-
-#define Valid_Min				-35
-#define Valid_Max			10
-#define ValidCnt				5
diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
deleted file mode 100644
index 01c5c524d4e0..000000000000
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- *****************************************************************************/
-#ifndef	__ODMNOISEMONITOR_H__
-#define __ODMNOISEMONITOR_H__
-
-#define	ODM_MAX_CHANNEL_NUM					38/* 14+24 */
-struct noise_level {
-	/* u8 value_a, value_b; */
-	u8 value[MAX_RF_PATH];
-	/* s8 sval_a, sval_b; */
-	s8 sval[MAX_RF_PATH];
-
-	/* s32 noise_a = 0, noise_b = 0, sum_a = 0, sum_b = 0; */
-	/* s32 noise[ODM_RF_PATH_MAX]; */
-	s32 sum[MAX_RF_PATH];
-	/* u8 valid_cnt_a = 0, valid_cnt_b = 0, */
-	u8 valid[MAX_RF_PATH];
-	u8 valid_cnt[MAX_RF_PATH];
-
-};
-
-
-struct odm_noise_monitor {
-	s8 noise[MAX_RF_PATH];
-	s16 noise_all;
-};
-
-#endif
diff --git a/drivers/staging/rtl8723bs/hal/odm_precomp.h b/drivers/staging/rtl8723bs/hal/odm_precomp.h
index edce506022a5..2987857a8761 100644
--- a/drivers/staging/rtl8723bs/hal/odm_precomp.h
+++ b/drivers/staging/rtl8723bs/hal/odm_precomp.h
@@ -33,7 +33,6 @@
 #include "odm_DynamicBBPowerSaving.h"
 #include "odm_DynamicTxPower.h"
 #include "odm_CfoTracking.h"
-#include "odm_NoiseMonitor.h"
 #include "HalPhyRf.h"
 #include "HalPhyRf_8723B.h"/* for IQK, LCK, Power-tracking */
 #include "rtl8723b_hal.h"
-- 
2.25.1

[PATCH v2 4/4] staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c

[Nam Cao]

[-- Attachment #1: Type: text/plain, Size: 3554 bytes --]

because the content of these files is not used.

Signed-off-by: Nam Cao <namcaov@gmail.com>
---
 drivers/staging/rtl8723bs/hal/odm.h           |  1 -
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.c  | 19 -----------
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.h  | 32 -------------------
 drivers/staging/rtl8723bs/hal/odm_precomp.h   |  1 -
 4 files changed, 53 deletions(-)
 delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
 delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h

diff --git a/drivers/staging/rtl8723bs/hal/odm.h b/drivers/staging/rtl8723bs/hal/odm.h
index 033f22b0f394..fe9782d2d4fd 100644
--- a/drivers/staging/rtl8723bs/hal/odm.h
+++ b/drivers/staging/rtl8723bs/hal/odm.h
@@ -14,7 +14,6 @@
 #include "odm_DynamicBBPowerSaving.h"
 #include "odm_DynamicTxPower.h"
 #include "odm_CfoTracking.h"
-#include "odm_NoiseMonitor.h"
 
 #define	TP_MODE		0
 #define	RSSI_MODE		1
diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
deleted file mode 100644
index b85b323cf5bd..000000000000
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- ******************************************************************************/
-
-#include "odm_precomp.h"
-
-/*  This function is for inband noise test utility only */
-/*  To obtain the inband noise level(dbm), do the following. */
-/*  1. disable DIG and Power Saving */
-/*  2. Set initial gain = 0x1a */
-/*  3. Stop updating idle time pwer report (for driver read) */
-/* - 0x80c[25] */
-
-#define Valid_Min				-35
-#define Valid_Max			10
-#define ValidCnt				5
diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
deleted file mode 100644
index 01c5c524d4e0..000000000000
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- *****************************************************************************/
-#ifndef	__ODMNOISEMONITOR_H__
-#define __ODMNOISEMONITOR_H__
-
-#define	ODM_MAX_CHANNEL_NUM					38/* 14+24 */
-struct noise_level {
-	/* u8 value_a, value_b; */
-	u8 value[MAX_RF_PATH];
-	/* s8 sval_a, sval_b; */
-	s8 sval[MAX_RF_PATH];
-
-	/* s32 noise_a = 0, noise_b = 0, sum_a = 0, sum_b = 0; */
-	/* s32 noise[ODM_RF_PATH_MAX]; */
-	s32 sum[MAX_RF_PATH];
-	/* u8 valid_cnt_a = 0, valid_cnt_b = 0, */
-	u8 valid[MAX_RF_PATH];
-	u8 valid_cnt[MAX_RF_PATH];
-
-};
-
-
-struct odm_noise_monitor {
-	s8 noise[MAX_RF_PATH];
-	s16 noise_all;
-};
-
-#endif
diff --git a/drivers/staging/rtl8723bs/hal/odm_precomp.h b/drivers/staging/rtl8723bs/hal/odm_precomp.h
index edce506022a5..2987857a8761 100644
--- a/drivers/staging/rtl8723bs/hal/odm_precomp.h
+++ b/drivers/staging/rtl8723bs/hal/odm_precomp.h
@@ -33,7 +33,6 @@
 #include "odm_DynamicBBPowerSaving.h"
 #include "odm_DynamicTxPower.h"
 #include "odm_CfoTracking.h"
-#include "odm_NoiseMonitor.h"
 #include "HalPhyRf.h"
 #include "HalPhyRf_8723B.h"/* for IQK, LCK, Power-tracking */
 #include "rtl8723b_hal.h"
-- 
2.25.1

Re: [PATCH v2 0/4] remove useless files

[Hans de Goede]

Hi,

Patch 1/4 seems to be missing?

Also please squash patches 3 and 4:

   staging: rtl8723bs: remove odm_NoiseMonitor.o from Makefile
   staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c

together. Ion other words remove both the files and the Makefile
target in a single patch please.

Regards,

Hans


On 8/20/22 08:42, Nam Cao wrote:
> Delete odm_NoiseMonitor.c and odm_NoiseMonitor.h because they are
> useless. The first 2 commits are preparation, and the final commit is
> actual removal.
> 
> v2: Add new patch to remove the file from Makefile, otherwise there is
> build error as reported by kernel test bot.
> 
> Nam Cao (4):
>   staging: rtl8723bs: remove unused function ODM_InbandNoise_Monitor
>   staging: rtl8723bs: remove member noise_level from struct dm_odm_t
>   staging: rtl8723bs: remove odm_NoiseMonitor.o from Makefile
>   staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c
> 
>  drivers/staging/rtl8723bs/Makefile            |   1 -
>  drivers/staging/rtl8723bs/hal/odm.h           |   2 -
>  .../staging/rtl8723bs/hal/odm_NoiseMonitor.c  | 130 ------------------
>  .../staging/rtl8723bs/hal/odm_NoiseMonitor.h  |  39 ------
>  drivers/staging/rtl8723bs/hal/odm_precomp.h   |   1 -
>  5 files changed, 173 deletions(-)
>  delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
>  delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
> 

Re: [PATCH v2 0/4] remove useless files

[Hans de Goede]

[-- Attachment #1: Type: text/plain, Size: 1468 bytes --]

Hi,

Patch 1/4 seems to be missing?

Also please squash patches 3 and 4:

   staging: rtl8723bs: remove odm_NoiseMonitor.o from Makefile
   staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c

together. Ion other words remove both the files and the Makefile
target in a single patch please.

Regards,

Hans


On 8/20/22 08:42, Nam Cao wrote:
> Delete odm_NoiseMonitor.c and odm_NoiseMonitor.h because they are
> useless. The first 2 commits are preparation, and the final commit is
> actual removal.
> 
> v2: Add new patch to remove the file from Makefile, otherwise there is
> build error as reported by kernel test bot.
> 
> Nam Cao (4):
>   staging: rtl8723bs: remove unused function ODM_InbandNoise_Monitor
>   staging: rtl8723bs: remove member noise_level from struct dm_odm_t
>   staging: rtl8723bs: remove odm_NoiseMonitor.o from Makefile
>   staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c
> 
>  drivers/staging/rtl8723bs/Makefile            |   1 -
>  drivers/staging/rtl8723bs/hal/odm.h           |   2 -
>  .../staging/rtl8723bs/hal/odm_NoiseMonitor.c  | 130 ------------------
>  .../staging/rtl8723bs/hal/odm_NoiseMonitor.h  |  39 ------
>  drivers/staging/rtl8723bs/hal/odm_precomp.h   |   1 -
>  5 files changed, 173 deletions(-)
>  delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
>  delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
> 

Re: [PATCH v2 0/4] remove useless files

[Nam Cao]

Hi

On Sat, Aug 20, 2022 at 2:17 PM Hans de Goede <hdegoede@redhat.com> wrote:
>
> Hi,
>
> Patch 1/4 seems to be missing?

Patch 1/4 is there:
https://lore.kernel.org/linux-staging/46d73e331bae2192a328f6691763f39ea6c18b08.1660977536.git.namcaov@gmail.com/

>
> Also please squash patches 3 and 4:
>
>    staging: rtl8723bs: remove odm_NoiseMonitor.o from Makefile
>    staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c
>
> together. Ion other words remove both the files and the Makefile
> target in a single patch please.

Sorry but I am not sure what I am supposed to do with kernel test bot.
I agree that it makes sense to squash these 2 commits together. However,
I separated them because I want to have 1 patch addressing the problem reported
by the bot, so that I can put the "Reported-by" line to this patch.

If I squash them, should I still put in the "Reported-by" line, despite the
commit not exactly fixing the reported error. Or should I just leave it out?

>
> Regards,
>
> Hans
>

Thanks for spending time reviewing.

Best regards,

Nam

Re: [PATCH v2 0/4] remove useless files

[Nam Cao]

[-- Attachment #1: Type: text/plain, Size: 1110 bytes --]

Hi

On Sat, Aug 20, 2022 at 2:17 PM Hans de Goede <hdegoede@redhat.com> wrote:
>
> Hi,
>
> Patch 1/4 seems to be missing?

Patch 1/4 is there:
https://lore.kernel.org/linux-staging/46d73e331bae2192a328f6691763f39ea6c18b08.1660977536.git.namcaov(a)gmail.com/

>
> Also please squash patches 3 and 4:
>
>    staging: rtl8723bs: remove odm_NoiseMonitor.o from Makefile
>    staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c
>
> together. Ion other words remove both the files and the Makefile
> target in a single patch please.

Sorry but I am not sure what I am supposed to do with kernel test bot.
I agree that it makes sense to squash these 2 commits together. However,
I separated them because I want to have 1 patch addressing the problem reported
by the bot, so that I can put the "Reported-by" line to this patch.

If I squash them, should I still put in the "Reported-by" line, despite the
commit not exactly fixing the reported error. Or should I just leave it out?

>
> Regards,
>
> Hans
>

Thanks for spending time reviewing.

Best regards,

Nam

Re: [PATCH v2 0/4] remove useless files

[Hans de Goede]

Hi,

On 8/20/22 16:35, Nam Cao wrote:
> Hi
> 
> On Sat, Aug 20, 2022 at 2:17 PM Hans de Goede <hdegoede@redhat.com> wrote:
>>
>> Hi,
>>
>> Patch 1/4 seems to be missing?
> 
> Patch 1/4 is there:
> https://lore.kernel.org/linux-staging/46d73e331bae2192a328f6691763f39ea6c18b08.1660977536.git.namcaov@gmail.com/
> 
>>
>> Also please squash patches 3 and 4:
>>
>>    staging: rtl8723bs: remove odm_NoiseMonitor.o from Makefile
>>    staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c
>>
>> together. Ion other words remove both the files and the Makefile
>> target in a single patch please.
> 
> Sorry but I am not sure what I am supposed to do with kernel test bot.
> I agree that it makes sense to squash these 2 commits together. However,
> I separated them because I want to have 1 patch addressing the problem reported
> by the bot, so that I can put the "Reported-by" line to this patch.
> 
> If I squash them, should I still put in the "Reported-by" line, despite the
> commit not exactly fixing the reported error. Or should I just leave it out?

You should just leave it out, that is the standard thing to do for
bot reported problems which are fixed before the patches are merged.

Regards,

Hans

Re: [PATCH v2 0/4] remove useless files

[Hans de Goede]

[-- Attachment #1: Type: text/plain, Size: 1261 bytes --]

Hi,

On 8/20/22 16:35, Nam Cao wrote:
> Hi
> 
> On Sat, Aug 20, 2022 at 2:17 PM Hans de Goede <hdegoede@redhat.com> wrote:
>>
>> Hi,
>>
>> Patch 1/4 seems to be missing?
> 
> Patch 1/4 is there:
> https://lore.kernel.org/linux-staging/46d73e331bae2192a328f6691763f39ea6c18b08.1660977536.git.namcaov(a)gmail.com/
> 
>>
>> Also please squash patches 3 and 4:
>>
>>    staging: rtl8723bs: remove odm_NoiseMonitor.o from Makefile
>>    staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c
>>
>> together. Ion other words remove both the files and the Makefile
>> target in a single patch please.
> 
> Sorry but I am not sure what I am supposed to do with kernel test bot.
> I agree that it makes sense to squash these 2 commits together. However,
> I separated them because I want to have 1 patch addressing the problem reported
> by the bot, so that I can put the "Reported-by" line to this patch.
> 
> If I squash them, should I still put in the "Reported-by" line, despite the
> commit not exactly fixing the reported error. Or should I just leave it out?

You should just leave it out, that is the standard thing to do for
bot reported problems which are fixed before the patches are merged.

Regards,

Hans

[PATCH v3 0/3] remove useless files

[Nam Cao]

Delete odm_NoiseMonitor.c and odm_NoiseMonitor.h because they are
useless. The first 2 commits are preparation, and the final commit is
actual removal.

v2: Add new patch to remove the file from Makefile, otherwise there is
    build error as reported by kernel test bot.
v3: Squash some commits together. The patchset functionally remains
    the same.

Nam Cao (3):
  staging: rtl8723bs: remove unused function ODM_InbandNoise_Monitor
  staging: rtl8723bs: remove member noise_level from struct dm_odm_t
  staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c

 drivers/staging/rtl8723bs/Makefile            |   1 -
 drivers/staging/rtl8723bs/hal/odm.h           |   2 -
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.c  | 130 ------------------
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.h  |  39 ------
 drivers/staging/rtl8723bs/hal/odm_precomp.h   |   1 -
 5 files changed, 173 deletions(-)
 delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
 delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h

-- 
2.25.1

[PATCH v3 0/3] remove useless files

[Nam Cao]

[-- Attachment #1: Type: text/plain, Size: 1085 bytes --]

Delete odm_NoiseMonitor.c and odm_NoiseMonitor.h because they are
useless. The first 2 commits are preparation, and the final commit is
actual removal.

v2: Add new patch to remove the file from Makefile, otherwise there is
    build error as reported by kernel test bot.
v3: Squash some commits together. The patchset functionally remains
    the same.

Nam Cao (3):
  staging: rtl8723bs: remove unused function ODM_InbandNoise_Monitor
  staging: rtl8723bs: remove member noise_level from struct dm_odm_t
  staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c

 drivers/staging/rtl8723bs/Makefile            |   1 -
 drivers/staging/rtl8723bs/hal/odm.h           |   2 -
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.c  | 130 ------------------
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.h  |  39 ------
 drivers/staging/rtl8723bs/hal/odm_precomp.h   |   1 -
 5 files changed, 173 deletions(-)
 delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
 delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h

-- 
2.25.1

[PATCH v3 1/3] staging: rtl8723bs: remove unused function ODM_InbandNoise_Monitor

[Nam Cao]

because this function is not used. Also remove function
odm_InbandNoise_Monitor_NSeries because it is a static function
which is only called from ODM_InbandNoise_Monitor.

Signed-off-by: Nam Cao <namcaov@gmail.com>
---
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.c  | 111 ------------------
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.h  |   7 --
 2 files changed, 118 deletions(-)

diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
index 392cc8a398f5..b85b323cf5bd 100644
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
+++ b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
@@ -17,114 +17,3 @@
 #define Valid_Min				-35
 #define Valid_Max			10
 #define ValidCnt				5
-
-static s16 odm_InbandNoise_Monitor_NSeries(
-	struct dm_odm_t *pDM_Odm,
-	u8 bPauseDIG,
-	u8 IGIValue,
-	u32 max_time
-)
-{
-	u32 tmp4b;
-	u8 max_rf_path = 0, rf_path;
-	u8 reg_c50, reg_c58, valid_done = 0;
-	struct noise_level noise_data;
-	u32 start  = 0;
-
-	pDM_Odm->noise_level.noise_all = 0;
-
-	max_rf_path = 1;
-
-	memset(&noise_data, 0, sizeof(struct noise_level));
-
-	/*  */
-	/*  Step 1. Disable DIG && Set initial gain. */
-	/*  */
-
-	if (bPauseDIG)
-		odm_PauseDIG(pDM_Odm, ODM_PAUSE_DIG, IGIValue);
-	/*  */
-	/*  Step 2. Disable all power save for read registers */
-	/*  */
-	/* dcmd_DebugControlPowerSave(padapter, PSDisable); */
-
-	/*  */
-	/*  Step 3. Get noise power level */
-	/*  */
-	start = jiffies;
-	while (1) {
-
-		/* Stop updating idle time pwer report (for driver read) */
-		PHY_SetBBReg(pDM_Odm->Adapter, rFPGA0_TxGainStage, BIT25, 1);
-
-		/* Read Noise Floor Report */
-		tmp4b = PHY_QueryBBReg(pDM_Odm->Adapter, 0x8f8, bMaskDWord);
-
-		/* PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_XAAGCCore1, bMaskByte0, TestInitialGain); */
-		/* if (max_rf_path == 2) */
-		/* PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_XBAGCCore1, bMaskByte0, TestInitialGain); */
-
-		/* update idle time pwer report per 5us */
-		PHY_SetBBReg(pDM_Odm->Adapter, rFPGA0_TxGainStage, BIT25, 0);
-
-		noise_data.value[RF_PATH_A] = (u8)(tmp4b&0xff);
-		noise_data.value[RF_PATH_B]  = (u8)((tmp4b&0xff00)>>8);
-
-		for (rf_path = RF_PATH_A; rf_path < max_rf_path; rf_path++) {
-			noise_data.sval[rf_path] = (s8)noise_data.value[rf_path];
-			noise_data.sval[rf_path] /= 2;
-		}
-		/* mdelay(10); */
-		/* msleep(10); */
-
-		for (rf_path = RF_PATH_A; rf_path < max_rf_path; rf_path++) {
-			if ((noise_data.valid_cnt[rf_path] < ValidCnt) && (noise_data.sval[rf_path] < Valid_Max && noise_data.sval[rf_path] >= Valid_Min)) {
-				noise_data.valid_cnt[rf_path]++;
-				noise_data.sum[rf_path] += noise_data.sval[rf_path];
-				if (noise_data.valid_cnt[rf_path] == ValidCnt) {
-					valid_done++;
-				}
-
-			}
-
-		}
-
-		/* printk("####### valid_done:%d #############\n", valid_done); */
-		if ((valid_done == max_rf_path) || (jiffies_to_msecs(jiffies - start) > max_time)) {
-			for (rf_path = RF_PATH_A; rf_path < max_rf_path; rf_path++) {
-				/* printk("%s PATH_%d - sum = %d, valid_cnt = %d\n", __func__, rf_path, noise_data.sum[rf_path], noise_data.valid_cnt[rf_path]); */
-				if (noise_data.valid_cnt[rf_path])
-					noise_data.sum[rf_path] /= noise_data.valid_cnt[rf_path];
-				else
-					noise_data.sum[rf_path]  = 0;
-			}
-			break;
-		}
-	}
-	reg_c50 = (s32)PHY_QueryBBReg(pDM_Odm->Adapter, rOFDM0_XAAGCCore1, bMaskByte0);
-	reg_c50 &= ~BIT7;
-	pDM_Odm->noise_level.noise[RF_PATH_A] = -110 + reg_c50 + noise_data.sum[RF_PATH_A];
-	pDM_Odm->noise_level.noise_all += pDM_Odm->noise_level.noise[RF_PATH_A];
-
-	if (max_rf_path == 2) {
-		reg_c58 = (s32)PHY_QueryBBReg(pDM_Odm->Adapter, rOFDM0_XBAGCCore1, bMaskByte0);
-		reg_c58 &= ~BIT7;
-		pDM_Odm->noise_level.noise[RF_PATH_B] = -110 + reg_c58 + noise_data.sum[RF_PATH_B];
-		pDM_Odm->noise_level.noise_all += pDM_Odm->noise_level.noise[RF_PATH_B];
-	}
-	pDM_Odm->noise_level.noise_all /= max_rf_path;
-
-	/*  */
-	/*  Step 4. Recover the Dig */
-	/*  */
-	if (bPauseDIG)
-		odm_PauseDIG(pDM_Odm, ODM_RESUME_DIG, IGIValue);
-
-	return pDM_Odm->noise_level.noise_all;
-
-}
-
-s16 ODM_InbandNoise_Monitor(void *pDM_VOID, u8 bPauseDIG, u8 IGIValue, u32 max_time)
-{
-	return odm_InbandNoise_Monitor_NSeries(pDM_VOID, bPauseDIG, IGIValue, max_time);
-}
diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
index ab114543f39c..01c5c524d4e0 100644
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
+++ b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
@@ -29,11 +29,4 @@ struct odm_noise_monitor {
 	s16 noise_all;
 };
 
-s16 ODM_InbandNoise_Monitor(
-	void *pDM_VOID,
-	u8 bPauseDIG,
-	u8 IGIValue,
-	u32 max_time
-);
-
 #endif
-- 
2.25.1

[PATCH v3 1/3] staging: rtl8723bs: remove unused function ODM_InbandNoise_Monitor

[Nam Cao]

[-- Attachment #1: Type: text/plain, Size: 4850 bytes --]

because this function is not used. Also remove function
odm_InbandNoise_Monitor_NSeries because it is a static function
which is only called from ODM_InbandNoise_Monitor.

Signed-off-by: Nam Cao <namcaov@gmail.com>
---
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.c  | 111 ------------------
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.h  |   7 --
 2 files changed, 118 deletions(-)

diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
index 392cc8a398f5..b85b323cf5bd 100644
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
+++ b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
@@ -17,114 +17,3 @@
 #define Valid_Min				-35
 #define Valid_Max			10
 #define ValidCnt				5
-
-static s16 odm_InbandNoise_Monitor_NSeries(
-	struct dm_odm_t *pDM_Odm,
-	u8 bPauseDIG,
-	u8 IGIValue,
-	u32 max_time
-)
-{
-	u32 tmp4b;
-	u8 max_rf_path = 0, rf_path;
-	u8 reg_c50, reg_c58, valid_done = 0;
-	struct noise_level noise_data;
-	u32 start  = 0;
-
-	pDM_Odm->noise_level.noise_all = 0;
-
-	max_rf_path = 1;
-
-	memset(&noise_data, 0, sizeof(struct noise_level));
-
-	/*  */
-	/*  Step 1. Disable DIG && Set initial gain. */
-	/*  */
-
-	if (bPauseDIG)
-		odm_PauseDIG(pDM_Odm, ODM_PAUSE_DIG, IGIValue);
-	/*  */
-	/*  Step 2. Disable all power save for read registers */
-	/*  */
-	/* dcmd_DebugControlPowerSave(padapter, PSDisable); */
-
-	/*  */
-	/*  Step 3. Get noise power level */
-	/*  */
-	start = jiffies;
-	while (1) {
-
-		/* Stop updating idle time pwer report (for driver read) */
-		PHY_SetBBReg(pDM_Odm->Adapter, rFPGA0_TxGainStage, BIT25, 1);
-
-		/* Read Noise Floor Report */
-		tmp4b = PHY_QueryBBReg(pDM_Odm->Adapter, 0x8f8, bMaskDWord);
-
-		/* PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_XAAGCCore1, bMaskByte0, TestInitialGain); */
-		/* if (max_rf_path == 2) */
-		/* PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_XBAGCCore1, bMaskByte0, TestInitialGain); */
-
-		/* update idle time pwer report per 5us */
-		PHY_SetBBReg(pDM_Odm->Adapter, rFPGA0_TxGainStage, BIT25, 0);
-
-		noise_data.value[RF_PATH_A] = (u8)(tmp4b&0xff);
-		noise_data.value[RF_PATH_B]  = (u8)((tmp4b&0xff00)>>8);
-
-		for (rf_path = RF_PATH_A; rf_path < max_rf_path; rf_path++) {
-			noise_data.sval[rf_path] = (s8)noise_data.value[rf_path];
-			noise_data.sval[rf_path] /= 2;
-		}
-		/* mdelay(10); */
-		/* msleep(10); */
-
-		for (rf_path = RF_PATH_A; rf_path < max_rf_path; rf_path++) {
-			if ((noise_data.valid_cnt[rf_path] < ValidCnt) && (noise_data.sval[rf_path] < Valid_Max && noise_data.sval[rf_path] >= Valid_Min)) {
-				noise_data.valid_cnt[rf_path]++;
-				noise_data.sum[rf_path] += noise_data.sval[rf_path];
-				if (noise_data.valid_cnt[rf_path] == ValidCnt) {
-					valid_done++;
-				}
-
-			}
-
-		}
-
-		/* printk("####### valid_done:%d #############\n", valid_done); */
-		if ((valid_done == max_rf_path) || (jiffies_to_msecs(jiffies - start) > max_time)) {
-			for (rf_path = RF_PATH_A; rf_path < max_rf_path; rf_path++) {
-				/* printk("%s PATH_%d - sum = %d, valid_cnt = %d\n", __func__, rf_path, noise_data.sum[rf_path], noise_data.valid_cnt[rf_path]); */
-				if (noise_data.valid_cnt[rf_path])
-					noise_data.sum[rf_path] /= noise_data.valid_cnt[rf_path];
-				else
-					noise_data.sum[rf_path]  = 0;
-			}
-			break;
-		}
-	}
-	reg_c50 = (s32)PHY_QueryBBReg(pDM_Odm->Adapter, rOFDM0_XAAGCCore1, bMaskByte0);
-	reg_c50 &= ~BIT7;
-	pDM_Odm->noise_level.noise[RF_PATH_A] = -110 + reg_c50 + noise_data.sum[RF_PATH_A];
-	pDM_Odm->noise_level.noise_all += pDM_Odm->noise_level.noise[RF_PATH_A];
-
-	if (max_rf_path == 2) {
-		reg_c58 = (s32)PHY_QueryBBReg(pDM_Odm->Adapter, rOFDM0_XBAGCCore1, bMaskByte0);
-		reg_c58 &= ~BIT7;
-		pDM_Odm->noise_level.noise[RF_PATH_B] = -110 + reg_c58 + noise_data.sum[RF_PATH_B];
-		pDM_Odm->noise_level.noise_all += pDM_Odm->noise_level.noise[RF_PATH_B];
-	}
-	pDM_Odm->noise_level.noise_all /= max_rf_path;
-
-	/*  */
-	/*  Step 4. Recover the Dig */
-	/*  */
-	if (bPauseDIG)
-		odm_PauseDIG(pDM_Odm, ODM_RESUME_DIG, IGIValue);
-
-	return pDM_Odm->noise_level.noise_all;
-
-}
-
-s16 ODM_InbandNoise_Monitor(void *pDM_VOID, u8 bPauseDIG, u8 IGIValue, u32 max_time)
-{
-	return odm_InbandNoise_Monitor_NSeries(pDM_VOID, bPauseDIG, IGIValue, max_time);
-}
diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
index ab114543f39c..01c5c524d4e0 100644
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
+++ b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
@@ -29,11 +29,4 @@ struct odm_noise_monitor {
 	s16 noise_all;
 };
 
-s16 ODM_InbandNoise_Monitor(
-	void *pDM_VOID,
-	u8 bPauseDIG,
-	u8 IGIValue,
-	u32 max_time
-);
-
 #endif
-- 
2.25.1

[PATCH v3 2/3] staging: rtl8723bs: remove member noise_level from struct dm_odm_t

[Nam Cao]

because it is not used.

Signed-off-by: Nam Cao <namcaov@gmail.com>
---
 drivers/staging/rtl8723bs/hal/odm.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/staging/rtl8723bs/hal/odm.h b/drivers/staging/rtl8723bs/hal/odm.h
index 19cfc2915458..033f22b0f394 100644
--- a/drivers/staging/rtl8723bs/hal/odm.h
+++ b/drivers/staging/rtl8723bs/hal/odm.h
@@ -863,7 +863,6 @@ struct dm_odm_t { /* DM_Out_Source_Dynamic_Mechanism_Structure */
 	u8 Adaptivity_IGI_upper;
 	u8 NHM_cnt_0;
 
-	struct odm_noise_monitor noise_level;/* ODM_MAX_CHANNEL_NUM]; */
 	/*  */
 	/* 2 Define STA info. */
 	/*  _ODM_STA_INFO */
-- 
2.25.1

[PATCH v3 2/3] staging: rtl8723bs: remove member noise_level from struct dm_odm_t

[Nam Cao]

[-- Attachment #1: Type: text/plain, Size: 647 bytes --]

because it is not used.

Signed-off-by: Nam Cao <namcaov@gmail.com>
---
 drivers/staging/rtl8723bs/hal/odm.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/staging/rtl8723bs/hal/odm.h b/drivers/staging/rtl8723bs/hal/odm.h
index 19cfc2915458..033f22b0f394 100644
--- a/drivers/staging/rtl8723bs/hal/odm.h
+++ b/drivers/staging/rtl8723bs/hal/odm.h
@@ -863,7 +863,6 @@ struct dm_odm_t { /* DM_Out_Source_Dynamic_Mechanism_Structure */
 	u8 Adaptivity_IGI_upper;
 	u8 NHM_cnt_0;
 
-	struct odm_noise_monitor noise_level;/* ODM_MAX_CHANNEL_NUM]; */
 	/*  */
 	/* 2 Define STA info. */
 	/*  _ODM_STA_INFO */
-- 
2.25.1

[PATCH v3 3/3] staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c

[Nam Cao]

because the content of these files is not used.

Signed-off-by: Nam Cao <namcaov@gmail.com>
---
 drivers/staging/rtl8723bs/Makefile            |  1 -
 drivers/staging/rtl8723bs/hal/odm.h           |  1 -
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.c  | 19 -----------
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.h  | 32 -------------------
 drivers/staging/rtl8723bs/hal/odm_precomp.h   |  1 -
 5 files changed, 54 deletions(-)
 delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
 delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h

diff --git a/drivers/staging/rtl8723bs/Makefile b/drivers/staging/rtl8723bs/Makefile
index 159ca1b9016b..bc7ff1dd14f9 100644
--- a/drivers/staging/rtl8723bs/Makefile
+++ b/drivers/staging/rtl8723bs/Makefile
@@ -33,7 +33,6 @@ r8723bs-y = \
 		hal/odm_DynamicTxPower.o \
 		hal/odm_EdcaTurboCheck.o \
 		hal/odm_HWConfig.o \
-		hal/odm_NoiseMonitor.o \
 		hal/odm_RegConfig8723B.o \
 		hal/rtl8723b_cmd.o \
 		hal/rtl8723b_dm.o \
diff --git a/drivers/staging/rtl8723bs/hal/odm.h b/drivers/staging/rtl8723bs/hal/odm.h
index 033f22b0f394..fe9782d2d4fd 100644
--- a/drivers/staging/rtl8723bs/hal/odm.h
+++ b/drivers/staging/rtl8723bs/hal/odm.h
@@ -14,7 +14,6 @@
 #include "odm_DynamicBBPowerSaving.h"
 #include "odm_DynamicTxPower.h"
 #include "odm_CfoTracking.h"
-#include "odm_NoiseMonitor.h"
 
 #define	TP_MODE		0
 #define	RSSI_MODE		1
diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
deleted file mode 100644
index b85b323cf5bd..000000000000
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- ******************************************************************************/
-
-#include "odm_precomp.h"
-
-/*  This function is for inband noise test utility only */
-/*  To obtain the inband noise level(dbm), do the following. */
-/*  1. disable DIG and Power Saving */
-/*  2. Set initial gain = 0x1a */
-/*  3. Stop updating idle time pwer report (for driver read) */
-/* - 0x80c[25] */
-
-#define Valid_Min				-35
-#define Valid_Max			10
-#define ValidCnt				5
diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
deleted file mode 100644
index 01c5c524d4e0..000000000000
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- *****************************************************************************/
-#ifndef	__ODMNOISEMONITOR_H__
-#define __ODMNOISEMONITOR_H__
-
-#define	ODM_MAX_CHANNEL_NUM					38/* 14+24 */
-struct noise_level {
-	/* u8 value_a, value_b; */
-	u8 value[MAX_RF_PATH];
-	/* s8 sval_a, sval_b; */
-	s8 sval[MAX_RF_PATH];
-
-	/* s32 noise_a = 0, noise_b = 0, sum_a = 0, sum_b = 0; */
-	/* s32 noise[ODM_RF_PATH_MAX]; */
-	s32 sum[MAX_RF_PATH];
-	/* u8 valid_cnt_a = 0, valid_cnt_b = 0, */
-	u8 valid[MAX_RF_PATH];
-	u8 valid_cnt[MAX_RF_PATH];
-
-};
-
-
-struct odm_noise_monitor {
-	s8 noise[MAX_RF_PATH];
-	s16 noise_all;
-};
-
-#endif
diff --git a/drivers/staging/rtl8723bs/hal/odm_precomp.h b/drivers/staging/rtl8723bs/hal/odm_precomp.h
index edce506022a5..2987857a8761 100644
--- a/drivers/staging/rtl8723bs/hal/odm_precomp.h
+++ b/drivers/staging/rtl8723bs/hal/odm_precomp.h
@@ -33,7 +33,6 @@
 #include "odm_DynamicBBPowerSaving.h"
 #include "odm_DynamicTxPower.h"
 #include "odm_CfoTracking.h"
-#include "odm_NoiseMonitor.h"
 #include "HalPhyRf.h"
 #include "HalPhyRf_8723B.h"/* for IQK, LCK, Power-tracking */
 #include "rtl8723b_hal.h"
-- 
2.25.1

[PATCH v3 3/3] staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c

[Nam Cao]

[-- Attachment #1: Type: text/plain, Size: 4049 bytes --]

because the content of these files is not used.

Signed-off-by: Nam Cao <namcaov@gmail.com>
---
 drivers/staging/rtl8723bs/Makefile            |  1 -
 drivers/staging/rtl8723bs/hal/odm.h           |  1 -
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.c  | 19 -----------
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.h  | 32 -------------------
 drivers/staging/rtl8723bs/hal/odm_precomp.h   |  1 -
 5 files changed, 54 deletions(-)
 delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
 delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h

diff --git a/drivers/staging/rtl8723bs/Makefile b/drivers/staging/rtl8723bs/Makefile
index 159ca1b9016b..bc7ff1dd14f9 100644
--- a/drivers/staging/rtl8723bs/Makefile
+++ b/drivers/staging/rtl8723bs/Makefile
@@ -33,7 +33,6 @@ r8723bs-y = \
 		hal/odm_DynamicTxPower.o \
 		hal/odm_EdcaTurboCheck.o \
 		hal/odm_HWConfig.o \
-		hal/odm_NoiseMonitor.o \
 		hal/odm_RegConfig8723B.o \
 		hal/rtl8723b_cmd.o \
 		hal/rtl8723b_dm.o \
diff --git a/drivers/staging/rtl8723bs/hal/odm.h b/drivers/staging/rtl8723bs/hal/odm.h
index 033f22b0f394..fe9782d2d4fd 100644
--- a/drivers/staging/rtl8723bs/hal/odm.h
+++ b/drivers/staging/rtl8723bs/hal/odm.h
@@ -14,7 +14,6 @@
 #include "odm_DynamicBBPowerSaving.h"
 #include "odm_DynamicTxPower.h"
 #include "odm_CfoTracking.h"
-#include "odm_NoiseMonitor.h"
 
 #define	TP_MODE		0
 #define	RSSI_MODE		1
diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
deleted file mode 100644
index b85b323cf5bd..000000000000
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- ******************************************************************************/
-
-#include "odm_precomp.h"
-
-/*  This function is for inband noise test utility only */
-/*  To obtain the inband noise level(dbm), do the following. */
-/*  1. disable DIG and Power Saving */
-/*  2. Set initial gain = 0x1a */
-/*  3. Stop updating idle time pwer report (for driver read) */
-/* - 0x80c[25] */
-
-#define Valid_Min				-35
-#define Valid_Max			10
-#define ValidCnt				5
diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
deleted file mode 100644
index 01c5c524d4e0..000000000000
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- *****************************************************************************/
-#ifndef	__ODMNOISEMONITOR_H__
-#define __ODMNOISEMONITOR_H__
-
-#define	ODM_MAX_CHANNEL_NUM					38/* 14+24 */
-struct noise_level {
-	/* u8 value_a, value_b; */
-	u8 value[MAX_RF_PATH];
-	/* s8 sval_a, sval_b; */
-	s8 sval[MAX_RF_PATH];
-
-	/* s32 noise_a = 0, noise_b = 0, sum_a = 0, sum_b = 0; */
-	/* s32 noise[ODM_RF_PATH_MAX]; */
-	s32 sum[MAX_RF_PATH];
-	/* u8 valid_cnt_a = 0, valid_cnt_b = 0, */
-	u8 valid[MAX_RF_PATH];
-	u8 valid_cnt[MAX_RF_PATH];
-
-};
-
-
-struct odm_noise_monitor {
-	s8 noise[MAX_RF_PATH];
-	s16 noise_all;
-};
-
-#endif
diff --git a/drivers/staging/rtl8723bs/hal/odm_precomp.h b/drivers/staging/rtl8723bs/hal/odm_precomp.h
index edce506022a5..2987857a8761 100644
--- a/drivers/staging/rtl8723bs/hal/odm_precomp.h
+++ b/drivers/staging/rtl8723bs/hal/odm_precomp.h
@@ -33,7 +33,6 @@
 #include "odm_DynamicBBPowerSaving.h"
 #include "odm_DynamicTxPower.h"
 #include "odm_CfoTracking.h"
-#include "odm_NoiseMonitor.h"
 #include "HalPhyRf.h"
 #include "HalPhyRf_8723B.h"/* for IQK, LCK, Power-tracking */
 #include "rtl8723b_hal.h"
-- 
2.25.1

Re: [PATCH v3 0/3] remove useless files

[Hans de Goede]

Hi Nam,

On 8/20/22 20:00, Nam Cao wrote:
> Delete odm_NoiseMonitor.c and odm_NoiseMonitor.h because they are
> useless. The first 2 commits are preparation, and the final commit is
> actual removal.
> 
> v2: Add new patch to remove the file from Makefile, otherwise there is
>     build error as reported by kernel test bot.
> v3: Squash some commits together. The patchset functionally remains
>     the same.
> 
> Nam Cao (3):
>   staging: rtl8723bs: remove unused function ODM_InbandNoise_Monitor
>   staging: rtl8723bs: remove member noise_level from struct dm_odm_t
>   staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c
> 
>  drivers/staging/rtl8723bs/Makefile            |   1 -
>  drivers/staging/rtl8723bs/hal/odm.h           |   2 -
>  .../staging/rtl8723bs/hal/odm_NoiseMonitor.c  | 130 ------------------
>  .../staging/rtl8723bs/hal/odm_NoiseMonitor.h  |  39 ------
>  drivers/staging/rtl8723bs/hal/odm_precomp.h   |   1 -
>  5 files changed, 173 deletions(-)
>  delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
>  delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h

Thank you for the new version, the entire series looks good to me:

Reviewed-by: Hans de Goede <hdegoede@redhat.com>

for the series.

Regards,

Hans

Re: [PATCH v3 0/3] remove useless files

[Hans de Goede]

[-- Attachment #1: Type: text/plain, Size: 1320 bytes --]

Hi Nam,

On 8/20/22 20:00, Nam Cao wrote:
> Delete odm_NoiseMonitor.c and odm_NoiseMonitor.h because they are
> useless. The first 2 commits are preparation, and the final commit is
> actual removal.
> 
> v2: Add new patch to remove the file from Makefile, otherwise there is
>     build error as reported by kernel test bot.
> v3: Squash some commits together. The patchset functionally remains
>     the same.
> 
> Nam Cao (3):
>   staging: rtl8723bs: remove unused function ODM_InbandNoise_Monitor
>   staging: rtl8723bs: remove member noise_level from struct dm_odm_t
>   staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c
> 
>  drivers/staging/rtl8723bs/Makefile            |   1 -
>  drivers/staging/rtl8723bs/hal/odm.h           |   2 -
>  .../staging/rtl8723bs/hal/odm_NoiseMonitor.c  | 130 ------------------
>  .../staging/rtl8723bs/hal/odm_NoiseMonitor.h  |  39 ------
>  drivers/staging/rtl8723bs/hal/odm_precomp.h   |   1 -
>  5 files changed, 173 deletions(-)
>  delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
>  delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h

Thank you for the new version, the entire series looks good to me:

Reviewed-by: Hans de Goede <hdegoede@redhat.com>

for the series.

Regards,

Hans

Re: [PATCH 3/3] staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c

[kernel test robot]

Hi Nam,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on staging/staging-testing]

url:    https://github.com/intel-lab-lkp/linux/commits/Nam-Cao/staging-rtl8723bs-remove-useless-files/20220819-173916
base:   https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git 8379cf83fe6d57a12952de6dcaf7a7fbd7b364fc
config: ia64-allmodconfig (https://download.01.org/0day-ci/archive/20220820/202208201056.675rcXqe-lkp@intel.com/config)
compiler: ia64-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/0fdeb2305c40b79975f2c6b683ee5225b3aedf08
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Nam-Cao/staging-rtl8723bs-remove-useless-files/20220819-173916
        git checkout 0fdeb2305c40b79975f2c6b683ee5225b3aedf08
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=ia64 SHELL=/bin/bash drivers/staging/

If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   make[4]: *** [scripts/Makefile.build:249: drivers/staging/rtl8723bs/core/rtw_ieee80211.o] Error 1
   make[4]: *** [scripts/Makefile.build:249: drivers/staging/rtl8723bs/core/rtw_pwrctrl.o] Error 1
   make[4]: *** [scripts/Makefile.build:249: drivers/staging/rtl8723bs/core/rtw_mlme_ext.o] Error 1
>> make[4]: *** No rule to make target 'drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.o', needed by 'drivers/staging/rtl8723bs/r8723bs.o'.
   make[4]: *** [scripts/Makefile.build:249: drivers/staging/rtl8723bs/os_dep/sdio_ops_linux.o] Error 1
   make[4]: *** [scripts/Makefile.build:249: drivers/staging/rtl8723bs/os_dep/sdio_intf.o] Error 1
   make[4]: *** [scripts/Makefile.build:249: drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.o] Error 1
   make[4]: *** [scripts/Makefile.build:249: drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.o] Error 1
   make[4]: Target '__build' not remade because of errors.

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

Re: [PATCH 0/3] staging: rtl8723bs: remove useless files

[Hans de Goede]

Hi,

On 8/19/22 11:35, Nam Cao wrote:
> Delete odm_NoiseMonitor.c and odm_NoiseMonitor.h because they are
> useless. The first 2 commits are preparation, and the final commit is
> actual removal.
> 
> Nam Cao (3):
>   staging: rtl8723bs: remove unused function ODM_InbandNoise_Monitor
>   staging: rtl8723bs: remove member noise_level from struct dm_odm_t
>   staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c
> 
>  drivers/staging/rtl8723bs/hal/odm.h           |   2 -
>  .../staging/rtl8723bs/hal/odm_NoiseMonitor.c  | 130 ------------------
>  .../staging/rtl8723bs/hal/odm_NoiseMonitor.h  |  39 ------
>  drivers/staging/rtl8723bs/hal/odm_precomp.h   |   1 -
>  4 files changed, 172 deletions(-)
>  delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
>  delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h

Thanks, the entire series looks good to me:

Reviewed-by: Hans de Goede <hdegoede@redhat.com>

for the series.

Regards,

Hans

[PATCH v3 3/3] staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c

[Nam Cao]

because the content of these files is not used.

Signed-off-by: Nam Cao <namcaov@gmail.com>
---
 drivers/staging/rtl8723bs/Makefile            |  1 -
 drivers/staging/rtl8723bs/hal/odm.h           |  1 -
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.c  | 19 -----------
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.h  | 32 -------------------
 drivers/staging/rtl8723bs/hal/odm_precomp.h   |  1 -
 5 files changed, 54 deletions(-)
 delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
 delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h

diff --git a/drivers/staging/rtl8723bs/Makefile b/drivers/staging/rtl8723bs/Makefile
index 159ca1b9016b..bc7ff1dd14f9 100644
--- a/drivers/staging/rtl8723bs/Makefile
+++ b/drivers/staging/rtl8723bs/Makefile
@@ -33,7 +33,6 @@ r8723bs-y = \
 		hal/odm_DynamicTxPower.o \
 		hal/odm_EdcaTurboCheck.o \
 		hal/odm_HWConfig.o \
-		hal/odm_NoiseMonitor.o \
 		hal/odm_RegConfig8723B.o \
 		hal/rtl8723b_cmd.o \
 		hal/rtl8723b_dm.o \
diff --git a/drivers/staging/rtl8723bs/hal/odm.h b/drivers/staging/rtl8723bs/hal/odm.h
index 033f22b0f394..fe9782d2d4fd 100644
--- a/drivers/staging/rtl8723bs/hal/odm.h
+++ b/drivers/staging/rtl8723bs/hal/odm.h
@@ -14,7 +14,6 @@
 #include "odm_DynamicBBPowerSaving.h"
 #include "odm_DynamicTxPower.h"
 #include "odm_CfoTracking.h"
-#include "odm_NoiseMonitor.h"
 
 #define	TP_MODE		0
 #define	RSSI_MODE		1
diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
deleted file mode 100644
index b85b323cf5bd..000000000000
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- ******************************************************************************/
-
-#include "odm_precomp.h"
-
-/*  This function is for inband noise test utility only */
-/*  To obtain the inband noise level(dbm), do the following. */
-/*  1. disable DIG and Power Saving */
-/*  2. Set initial gain = 0x1a */
-/*  3. Stop updating idle time pwer report (for driver read) */
-/* - 0x80c[25] */
-
-#define Valid_Min				-35
-#define Valid_Max			10
-#define ValidCnt				5
diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
deleted file mode 100644
index 01c5c524d4e0..000000000000
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- *****************************************************************************/
-#ifndef	__ODMNOISEMONITOR_H__
-#define __ODMNOISEMONITOR_H__
-
-#define	ODM_MAX_CHANNEL_NUM					38/* 14+24 */
-struct noise_level {
-	/* u8 value_a, value_b; */
-	u8 value[MAX_RF_PATH];
-	/* s8 sval_a, sval_b; */
-	s8 sval[MAX_RF_PATH];
-
-	/* s32 noise_a = 0, noise_b = 0, sum_a = 0, sum_b = 0; */
-	/* s32 noise[ODM_RF_PATH_MAX]; */
-	s32 sum[MAX_RF_PATH];
-	/* u8 valid_cnt_a = 0, valid_cnt_b = 0, */
-	u8 valid[MAX_RF_PATH];
-	u8 valid_cnt[MAX_RF_PATH];
-
-};
-
-
-struct odm_noise_monitor {
-	s8 noise[MAX_RF_PATH];
-	s16 noise_all;
-};
-
-#endif
diff --git a/drivers/staging/rtl8723bs/hal/odm_precomp.h b/drivers/staging/rtl8723bs/hal/odm_precomp.h
index edce506022a5..2987857a8761 100644
--- a/drivers/staging/rtl8723bs/hal/odm_precomp.h
+++ b/drivers/staging/rtl8723bs/hal/odm_precomp.h
@@ -33,7 +33,6 @@
 #include "odm_DynamicBBPowerSaving.h"
 #include "odm_DynamicTxPower.h"
 #include "odm_CfoTracking.h"
-#include "odm_NoiseMonitor.h"
 #include "HalPhyRf.h"
 #include "HalPhyRf_8723B.h"/* for IQK, LCK, Power-tracking */
 #include "rtl8723b_hal.h"
-- 
2.25.1

[PATCH v3 3/3] staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c

[Nam Cao]

[-- Attachment #1: Type: text/plain, Size: 4049 bytes --]

because the content of these files is not used.

Signed-off-by: Nam Cao <namcaov@gmail.com>
---
 drivers/staging/rtl8723bs/Makefile            |  1 -
 drivers/staging/rtl8723bs/hal/odm.h           |  1 -
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.c  | 19 -----------
 .../staging/rtl8723bs/hal/odm_NoiseMonitor.h  | 32 -------------------
 drivers/staging/rtl8723bs/hal/odm_precomp.h   |  1 -
 5 files changed, 54 deletions(-)
 delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
 delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h

diff --git a/drivers/staging/rtl8723bs/Makefile b/drivers/staging/rtl8723bs/Makefile
index 159ca1b9016b..bc7ff1dd14f9 100644
--- a/drivers/staging/rtl8723bs/Makefile
+++ b/drivers/staging/rtl8723bs/Makefile
@@ -33,7 +33,6 @@ r8723bs-y = \
 		hal/odm_DynamicTxPower.o \
 		hal/odm_EdcaTurboCheck.o \
 		hal/odm_HWConfig.o \
-		hal/odm_NoiseMonitor.o \
 		hal/odm_RegConfig8723B.o \
 		hal/rtl8723b_cmd.o \
 		hal/rtl8723b_dm.o \
diff --git a/drivers/staging/rtl8723bs/hal/odm.h b/drivers/staging/rtl8723bs/hal/odm.h
index 033f22b0f394..fe9782d2d4fd 100644
--- a/drivers/staging/rtl8723bs/hal/odm.h
+++ b/drivers/staging/rtl8723bs/hal/odm.h
@@ -14,7 +14,6 @@
 #include "odm_DynamicBBPowerSaving.h"
 #include "odm_DynamicTxPower.h"
 #include "odm_CfoTracking.h"
-#include "odm_NoiseMonitor.h"
 
 #define	TP_MODE		0
 #define	RSSI_MODE		1
diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
deleted file mode 100644
index b85b323cf5bd..000000000000
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- ******************************************************************************/
-
-#include "odm_precomp.h"
-
-/*  This function is for inband noise test utility only */
-/*  To obtain the inband noise level(dbm), do the following. */
-/*  1. disable DIG and Power Saving */
-/*  2. Set initial gain = 0x1a */
-/*  3. Stop updating idle time pwer report (for driver read) */
-/* - 0x80c[25] */
-
-#define Valid_Min				-35
-#define Valid_Max			10
-#define ValidCnt				5
diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
deleted file mode 100644
index 01c5c524d4e0..000000000000
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- *****************************************************************************/
-#ifndef	__ODMNOISEMONITOR_H__
-#define __ODMNOISEMONITOR_H__
-
-#define	ODM_MAX_CHANNEL_NUM					38/* 14+24 */
-struct noise_level {
-	/* u8 value_a, value_b; */
-	u8 value[MAX_RF_PATH];
-	/* s8 sval_a, sval_b; */
-	s8 sval[MAX_RF_PATH];
-
-	/* s32 noise_a = 0, noise_b = 0, sum_a = 0, sum_b = 0; */
-	/* s32 noise[ODM_RF_PATH_MAX]; */
-	s32 sum[MAX_RF_PATH];
-	/* u8 valid_cnt_a = 0, valid_cnt_b = 0, */
-	u8 valid[MAX_RF_PATH];
-	u8 valid_cnt[MAX_RF_PATH];
-
-};
-
-
-struct odm_noise_monitor {
-	s8 noise[MAX_RF_PATH];
-	s16 noise_all;
-};
-
-#endif
diff --git a/drivers/staging/rtl8723bs/hal/odm_precomp.h b/drivers/staging/rtl8723bs/hal/odm_precomp.h
index edce506022a5..2987857a8761 100644
--- a/drivers/staging/rtl8723bs/hal/odm_precomp.h
+++ b/drivers/staging/rtl8723bs/hal/odm_precomp.h
@@ -33,7 +33,6 @@
 #include "odm_DynamicBBPowerSaving.h"
 #include "odm_DynamicTxPower.h"
 #include "odm_CfoTracking.h"
-#include "odm_NoiseMonitor.h"
 #include "HalPhyRf.h"
 #include "HalPhyRf_8723B.h"/* for IQK, LCK, Power-tracking */
 #include "rtl8723b_hal.h"
-- 
2.25.1