All of lore.kernel.org
 help / color / mirror / Atom feed
From: <Tudor.Ambarus@microchip.com>
To: <p.yadav@ti.com>, <miquel.raynal@bootlin.com>, <richard@nod.at>,
	<vigneshr@ti.com>, <linux-mtd@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Cc: <nsekhar@ti.com>, <boris.brezillon@collabora.com>
Subject: Re: [PATCH v14 10/15] mtd: spi-nor: Parse SFDP SCCR Map
Date: Thu, 1 Oct 2020 08:20:54 +0000	[thread overview]
Message-ID: <81fa2331-d808-fed6-232f-f8b67e7e9dac@microchip.com> (raw)
In-Reply-To: <20200930185732.6201-11-p.yadav@ti.com>

On 9/30/20 9:57 PM, Pratyush Yadav wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> From: Tudor Ambarus <tudor.ambarus@microchip.com>
> 
> Parse just the 22nd dword and look for the 'DTR Octal Mode Enable
> Volatile bit'.
> 
> SPI_NOR_IO_MODE_EN_VOLATILE should be set just for the flashes
> that don't define the optional SFDP SCCR Map. For the others,
> let the SFDP do its job and fill the SNOR_F_IO_MODE_EN_VOLATILE
> flag. We avoid this way polluting the flash flags when declaring
> one.
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
> ---
>  drivers/mtd/spi-nor/sfdp.c | 52 ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 52 insertions(+)
> 
> diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
> index ebc1188f7533..0b5b9ea44cfc 100644
> --- a/drivers/mtd/spi-nor/sfdp.c
> +++ b/drivers/mtd/spi-nor/sfdp.c
> @@ -21,6 +21,10 @@
>  #define SFDP_SECTOR_MAP_ID     0xff81  /* Sector Map Table */
>  #define SFDP_4BAIT_ID          0xff84  /* 4-byte Address Instruction Table */
>  #define SFDP_PROFILE1_ID       0xff05  /* xSPI Profile 1.0 table. */
> +#define SFDP_SCCR_MAP_ID       0xff87  /*
> +                                        * Status, Control and Configuration
> +                                        * Register Map.
> +                                        */
> 
>  #define SFDP_SIGNATURE         0x50444653U
> 
> @@ -1195,6 +1199,50 @@ static int spi_nor_parse_profile1(struct spi_nor *nor,
>         return ret;
>  }
> 
> +#define SCCR_DWORD22_OCTAL_DTR_EN_VOLATILE             BIT(31)
> +
> +/**
> + * spi_nor_parse_sccr() - Parse the Status, Control and Configuration Register
> + *                        Map.
> + * @nor:               pointer to a 'struct spi_nor'
> + * @sccr_header:       pointer to the 'struct sfdp_parameter_header' describing
> + *                     the SCCR Map table length and version.
> + * @params:            pointer to the 'struct spi_nor_flash_parameter' to be.
> + *
> + * Return: 0 on success, -errno otherwise.
> + */
> +static int spi_nor_parse_sccr(struct spi_nor *nor,
> +                             const struct sfdp_parameter_header *sccr_header,
> +                             struct spi_nor_flash_parameter *params)
> +{
> +       u32 *dwords, addr;
> +       size_t len;
> +       int ret;
> +       u8 io_mode_en_volatile;

would a bool work here?

> +
> +       len = sccr_header->length * sizeof(*dwords);
> +       dwords = kmalloc(len, GFP_KERNEL);
> +       if (!dwords)
> +               return -ENOMEM;
> +
> +       addr = SFDP_PARAM_HEADER_PTP(sccr_header);
> +       ret = spi_nor_read_sfdp(nor, addr, len, dwords);
> +       if (ret)
> +               goto out;
> +
> +       le32_to_cpu_array(dwords, sccr_header->length);
> +
> +       io_mode_en_volatile = FIELD_GET(SCCR_DWORD22_OCTAL_DTR_EN_VOLATILE,
> +                                       dwords[22]);
> +
> +       if (io_mode_en_volatile)
> +               nor->flags |= SNOR_F_IO_MODE_EN_VOLATILE;
> +
> +out:
> +       kfree(dwords);
> +       return ret;
> +}
> +
>  /**
>   * spi_nor_parse_sfdp() - parse the Serial Flash Discoverable Parameters.
>   * @nor:               pointer to a 'struct spi_nor'
> @@ -1300,6 +1348,10 @@ int spi_nor_parse_sfdp(struct spi_nor *nor,
>                         err = spi_nor_parse_profile1(nor, param_header, params);
>                         break;
> 
> +               case SFDP_SCCR_MAP_ID:
> +                       err = spi_nor_parse_sccr(nor, param_header, params);
> +                       break;
> +
>                 default:
>                         break;
>                 }
> --
> 2.28.0
> 


WARNING: multiple messages have this Message-ID (diff)
From: <Tudor.Ambarus@microchip.com>
To: <p.yadav@ti.com>, <miquel.raynal@bootlin.com>, <richard@nod.at>,
	<vigneshr@ti.com>, <linux-mtd@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Cc: boris.brezillon@collabora.com, nsekhar@ti.com
Subject: Re: [PATCH v14 10/15] mtd: spi-nor: Parse SFDP SCCR Map
Date: Thu, 1 Oct 2020 08:20:54 +0000	[thread overview]
Message-ID: <81fa2331-d808-fed6-232f-f8b67e7e9dac@microchip.com> (raw)
In-Reply-To: <20200930185732.6201-11-p.yadav@ti.com>

On 9/30/20 9:57 PM, Pratyush Yadav wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> From: Tudor Ambarus <tudor.ambarus@microchip.com>
> 
> Parse just the 22nd dword and look for the 'DTR Octal Mode Enable
> Volatile bit'.
> 
> SPI_NOR_IO_MODE_EN_VOLATILE should be set just for the flashes
> that don't define the optional SFDP SCCR Map. For the others,
> let the SFDP do its job and fill the SNOR_F_IO_MODE_EN_VOLATILE
> flag. We avoid this way polluting the flash flags when declaring
> one.
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
> ---
>  drivers/mtd/spi-nor/sfdp.c | 52 ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 52 insertions(+)
> 
> diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
> index ebc1188f7533..0b5b9ea44cfc 100644
> --- a/drivers/mtd/spi-nor/sfdp.c
> +++ b/drivers/mtd/spi-nor/sfdp.c
> @@ -21,6 +21,10 @@
>  #define SFDP_SECTOR_MAP_ID     0xff81  /* Sector Map Table */
>  #define SFDP_4BAIT_ID          0xff84  /* 4-byte Address Instruction Table */
>  #define SFDP_PROFILE1_ID       0xff05  /* xSPI Profile 1.0 table. */
> +#define SFDP_SCCR_MAP_ID       0xff87  /*
> +                                        * Status, Control and Configuration
> +                                        * Register Map.
> +                                        */
> 
>  #define SFDP_SIGNATURE         0x50444653U
> 
> @@ -1195,6 +1199,50 @@ static int spi_nor_parse_profile1(struct spi_nor *nor,
>         return ret;
>  }
> 
> +#define SCCR_DWORD22_OCTAL_DTR_EN_VOLATILE             BIT(31)
> +
> +/**
> + * spi_nor_parse_sccr() - Parse the Status, Control and Configuration Register
> + *                        Map.
> + * @nor:               pointer to a 'struct spi_nor'
> + * @sccr_header:       pointer to the 'struct sfdp_parameter_header' describing
> + *                     the SCCR Map table length and version.
> + * @params:            pointer to the 'struct spi_nor_flash_parameter' to be.
> + *
> + * Return: 0 on success, -errno otherwise.
> + */
> +static int spi_nor_parse_sccr(struct spi_nor *nor,
> +                             const struct sfdp_parameter_header *sccr_header,
> +                             struct spi_nor_flash_parameter *params)
> +{
> +       u32 *dwords, addr;
> +       size_t len;
> +       int ret;
> +       u8 io_mode_en_volatile;

would a bool work here?

> +
> +       len = sccr_header->length * sizeof(*dwords);
> +       dwords = kmalloc(len, GFP_KERNEL);
> +       if (!dwords)
> +               return -ENOMEM;
> +
> +       addr = SFDP_PARAM_HEADER_PTP(sccr_header);
> +       ret = spi_nor_read_sfdp(nor, addr, len, dwords);
> +       if (ret)
> +               goto out;
> +
> +       le32_to_cpu_array(dwords, sccr_header->length);
> +
> +       io_mode_en_volatile = FIELD_GET(SCCR_DWORD22_OCTAL_DTR_EN_VOLATILE,
> +                                       dwords[22]);
> +
> +       if (io_mode_en_volatile)
> +               nor->flags |= SNOR_F_IO_MODE_EN_VOLATILE;
> +
> +out:
> +       kfree(dwords);
> +       return ret;
> +}
> +
>  /**
>   * spi_nor_parse_sfdp() - parse the Serial Flash Discoverable Parameters.
>   * @nor:               pointer to a 'struct spi_nor'
> @@ -1300,6 +1348,10 @@ int spi_nor_parse_sfdp(struct spi_nor *nor,
>                         err = spi_nor_parse_profile1(nor, param_header, params);
>                         break;
> 
> +               case SFDP_SCCR_MAP_ID:
> +                       err = spi_nor_parse_sccr(nor, param_header, params);
> +                       break;
> +
>                 default:
>                         break;
>                 }
> --
> 2.28.0
> 

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2020-10-01  8:21 UTC|newest]

Thread overview: 80+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-30 18:57 [PATCH v14 00/15] mtd: spi-nor: add xSPI Octal DTR support Pratyush Yadav
2020-09-30 18:57 ` Pratyush Yadav
2020-09-30 18:57 ` [PATCH v14 01/15] mtd: spi-nor: core: use EOPNOTSUPP instead of ENOTSUPP Pratyush Yadav
2020-09-30 18:57   ` Pratyush Yadav
2020-10-01  7:19   ` Tudor.Ambarus
2020-10-01  7:19     ` Tudor.Ambarus
2020-10-01  7:34     ` Pratyush Yadav
2020-10-01  7:34       ` Pratyush Yadav
2020-10-01  7:50       ` Miquel Raynal
2020-10-01  7:50         ` Miquel Raynal
2020-10-01  8:18         ` Tudor.Ambarus
2020-10-01  8:18           ` Tudor.Ambarus
2020-10-01 10:50         ` Vignesh Raghavendra
2020-10-01 10:50           ` Vignesh Raghavendra
2020-09-30 18:57 ` [PATCH v14 02/15] mtd: spi-nor: add spi_nor_controller_ops_{read_reg,write_reg,erase}() Pratyush Yadav
2020-09-30 18:57   ` [PATCH v14 02/15] mtd: spi-nor: add spi_nor_controller_ops_{read_reg, write_reg, erase}() Pratyush Yadav
2020-10-01  7:21   ` [PATCH v14 02/15] mtd: spi-nor: add spi_nor_controller_ops_{read_reg,write_reg,erase}() Tudor.Ambarus
2020-10-01  7:21     ` Tudor.Ambarus
2020-09-30 18:57 ` [PATCH v14 03/15] mtd: spi-nor: add support for DTR protocol Pratyush Yadav
2020-09-30 18:57   ` Pratyush Yadav
2020-10-01  7:46   ` Tudor.Ambarus
2020-10-01  7:46     ` Tudor.Ambarus
2020-10-01  8:37     ` Pratyush Yadav
2020-10-01  8:37       ` Pratyush Yadav
2020-10-01  8:49       ` Tudor.Ambarus
2020-10-01  8:49         ` Tudor.Ambarus
2020-09-30 18:57 ` [PATCH v14 04/15] mtd: spi-nor: sfdp: get command opcode extension type from BFPT Pratyush Yadav
2020-09-30 18:57   ` Pratyush Yadav
2020-09-30 18:57 ` [PATCH v14 05/15] mtd: spi-nor: sfdp: parse xSPI Profile 1.0 table Pratyush Yadav
2020-09-30 18:57   ` Pratyush Yadav
2020-10-01  7:49   ` Tudor.Ambarus
2020-10-01  7:49     ` Tudor.Ambarus
2020-09-30 18:57 ` [PATCH v14 06/15] mtd: spi-nor: core: use dummy cycle and address width info from SFDP Pratyush Yadav
2020-09-30 18:57   ` Pratyush Yadav
2020-10-01  7:50   ` Tudor.Ambarus
2020-10-01  7:50     ` Tudor.Ambarus
2020-09-30 18:57 ` [PATCH v14 07/15] mtd: spi-nor: core: do 2 byte reads for SR and FSR in DTR mode Pratyush Yadav
2020-09-30 18:57   ` Pratyush Yadav
2020-10-01  7:52   ` Tudor.Ambarus
2020-10-01  7:52     ` Tudor.Ambarus
2020-09-30 18:57 ` [PATCH v14 08/15] mtd: spi-nor: core: enable octal DTR mode when possible Pratyush Yadav
2020-09-30 18:57   ` Pratyush Yadav
2020-10-01  8:09   ` Tudor.Ambarus
2020-10-01  8:09     ` Tudor.Ambarus
2020-10-01  8:42     ` Pratyush Yadav
2020-10-01  8:42       ` Pratyush Yadav
2020-09-30 18:57 ` [PATCH v14 09/15] mtd: spi-nor: Introduce SNOR_F_IO_MODE_EN_VOLATILE Pratyush Yadav
2020-09-30 18:57   ` Pratyush Yadav
2020-09-30 18:57 ` [PATCH v14 10/15] mtd: spi-nor: Parse SFDP SCCR Map Pratyush Yadav
2020-09-30 18:57   ` Pratyush Yadav
2020-10-01  8:20   ` Tudor.Ambarus [this message]
2020-10-01  8:20     ` Tudor.Ambarus
2020-10-01 11:56     ` Pratyush Yadav
2020-10-01 11:56       ` Pratyush Yadav
2020-09-30 18:57 ` [PATCH v14 11/15] mtd: spi-nor: sfdp: detect Soft Reset sequence support from BFPT Pratyush Yadav
2020-09-30 18:57   ` Pratyush Yadav
2020-10-01  8:21   ` Tudor.Ambarus
2020-10-01  8:21     ` Tudor.Ambarus
2020-09-30 18:57 ` [PATCH v14 12/15] mtd: spi-nor: core: perform a Soft Reset on shutdown Pratyush Yadav
2020-09-30 18:57   ` Pratyush Yadav
2020-10-01  8:23   ` Tudor.Ambarus
2020-10-01  8:23     ` Tudor.Ambarus
2020-09-30 18:57 ` [PATCH v14 13/15] mtd: spi-nor: core: disable Octal DTR mode on suspend Pratyush Yadav
2020-09-30 18:57   ` Pratyush Yadav
2020-10-01  8:26   ` Tudor.Ambarus
2020-10-01  8:26     ` Tudor.Ambarus
2020-09-30 18:57 ` [PATCH v14 14/15] mtd: spi-nor: spansion: add support for Cypress Semper flash Pratyush Yadav
2020-09-30 18:57   ` Pratyush Yadav
2020-10-01  8:35   ` Tudor.Ambarus
2020-10-01  8:35     ` Tudor.Ambarus
2020-10-01  8:40     ` Pratyush Yadav
2020-10-01  8:40       ` Pratyush Yadav
2020-10-01  8:50       ` Tudor.Ambarus
2020-10-01  8:50         ` Tudor.Ambarus
2020-09-30 18:57 ` [PATCH v14 15/15] mtd: spi-nor: micron-st: allow using MT35XU512ABA in Octal DTR mode Pratyush Yadav
2020-09-30 18:57   ` Pratyush Yadav
2020-10-01  8:38   ` Tudor.Ambarus
2020-10-01  8:38     ` Tudor.Ambarus
2020-10-01 19:43     ` Pratyush Yadav
2020-10-01 19:43       ` Pratyush Yadav

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=81fa2331-d808-fed6-232f-f8b67e7e9dac@microchip.com \
    --to=tudor.ambarus@microchip.com \
    --cc=boris.brezillon@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=nsekhar@ti.com \
    --cc=p.yadav@ti.com \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.