From: Mirza Krak <mirza.krak@gmail.com>
To: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Wolfgang Grandegger <wg@grandegger.com>,
"ZHU Yi (ST-FIR/ENG1-Zhu)" <Yi.Zhu5@cn.bosch.com>,
Pankaj Bansal <pankaj.bansal@nxp.com>,
"linux-can@vger.kernel.org" <linux-can@vger.kernel.org>,
Varun Sethi <V.Sethi@nxp.com>,
Poonam Aggrwal <poonam.aggrwal@nxp.com>,
Stefan Agner <stefan@agner.ch>
Subject: Re: [PATCH v2 2/2] can: flexcan: adding platform specific details for LS1021A
Date: Fri, 1 Dec 2017 11:12:56 +0100 [thread overview]
Message-ID: <CALw8SCWhBZnh8P5c0MzTw95-SHhROhi68gOnGRBr9K+6hb2A5w@mail.gmail.com> (raw)
In-Reply-To: <CALw8SCXqcuUn_70704TxQAZrOFMbXhhdoYap2B4AFNJYFVw3Qg@mail.gmail.com>
2017-11-28 23:11 GMT+01:00 Mirza Krak <mirza.krak@gmail.com>:
> 2017-11-28 23:09 GMT+01:00 Mirza Krak <mirza.krak@gmail.com>:
>> 2017-11-27 15:00 GMT+01:00 Marc Kleine-Budde <mkl@pengutronix.de>:
>>>
>>> On 11/26/2017 10:11 PM, Mirza Krak wrote:
>>> >>> Will try again next week when I am back at the office.
>>> >>>
>>> >>> I ran my tests on 4.14 kernel.
>>> >>
>>> >> This Flexcan core needs the FLEXCAN_QUIRK_BROKEN_PERR_STATE as well,
>>> >> like
>>> >> all other cores. Adding that quirk for the vf610 will cure the
>>> >> problems.
>>> >
>>> > I will probably get some time during the coming week to test adding
>>> > FLEXCAN_QUIRK_BROKEN_PERR_STATE and I can send a patch if it all looks
>>> > good.
>>>
>>> I've created a patch, waiting for your Tested-by.
>>>
>>>
>>> https://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git/log/?h=testing
Tested-by: Mirza Krak <mirza.krak@gmail.com>
Test results:
1. Not connected and then connected
root@colibri-vf:~# ./candump -td -e any,0:0,#FFFFFFFF
(000.000000) can0 20000004 [8] 00 04 00 00 00 00 00 00 ERRORFRAME
controller-problem{rx-error-warning}
(000.000120) can0 20000004 [8] 00 10 00 00 00 00 00 00 ERRORFRAME
controller-problem{rx-error-passive}
And I also get the following:
(000.000011) can0 20000004 [8] 00 04 00 00 00 00 00 00 ERRORFRAME
controller-problem{rx-error-warning}
and
(000.000008) can0 20000004 [8] 00 40 00 00 00 00 00 00 ERRORFRAME
controller-problem{back-to-error-active}
When I re-connect to the network.
2. Short on CAN_H and CAN_L
root@colibri-vf:~# ./candump -td -e any,0:0,#FFFFFFFF
(000.000000) can0 20000004 [8] 00 08 00 00 00 00 00 00 ERRORFRAME
controller-problem{tx-error-warning}
(000.000043) can0 20000004 [8] 00 20 00 00 00 00 00 00 ERRORFRAME
controller-problem{tx-error-passive}
(000.000745) can0 20000040 [8] 00 00 00 00 00 00 00 00 ERRORFRAME
bus-off
(000.100306) can0 20000100 [8] 00 00 00 00 00 00 00 00 ERRORFRAME
restarted-after-bus-off
(000.111280) can0 20000004 [8] 00 08 00 00 00 00 00 00 ERRORFRAME
controller-problem{tx-error-warning}
(000.000034) can0 20000004 [8] 00 20 00 00 00 00 00 00 ERRORFRAME
controller-problem{tx-error-passive}
(000.000759) can0 20000040 [8] 00 00 00 00 00 00 00 00 ERRORFRAME
bus-off
--
Med Vänliga Hälsningar / Best Regards
Mirza Krak
next prev parent reply other threads:[~2017-12-01 10:12 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-10 9:59 [PATCH 1/2] can: flexcan: Remodel FlexCAN register r/w APIs for big endian FlexCAN controllers Pankaj Bansal
2017-11-10 9:59 ` [PATCH 2/2] can: flexcan: adding platform specific details for LS1021A Pankaj Bansal
2017-11-10 10:06 ` [PATCH 1/2] can: flexcan: Remodel FlexCAN register r/w APIs for big endian FlexCAN controllers Marc Kleine-Budde
2017-11-10 11:06 ` Pankaj Bansal
2017-11-10 11:09 ` Marc Kleine-Budde
2017-11-10 12:35 ` Pankaj Bansal
[not found] ` <AM0PR0402MB394051B0FAADBC45AF71439CF1540-mYCQpYF9suc3mfjNbz3WnI3W/0Ik+aLCnBOFsp37pqbUKgpGm//BTAC/G2K4zDHf@public.gmane.org>
2017-11-10 12:49 ` Marc Kleine-Budde
2017-11-10 16:32 ` Pankaj Bansal
[not found] ` <AM0PR0402MB3940DE05B2BA456D0FF54498F1540-mYCQpYF9suc3mfjNbz3WnI3W/0Ik+aLCnBOFsp37pqbUKgpGm//BTAC/G2K4zDHf@public.gmane.org>
2017-11-13 15:50 ` Marc Kleine-Budde
2017-11-10 10:48 ` Marc Kleine-Budde
2017-11-14 11:56 ` [PATCH v2 " Pankaj Bansal
2017-11-14 11:56 ` [PATCH v2 2/2] can: flexcan: adding platform specific details for LS1021A Pankaj Bansal
2017-11-14 12:59 ` Marc Kleine-Budde
2017-11-16 5:34 ` Pankaj Bansal
2017-11-16 7:05 ` Wolfgang Grandegger
2017-11-16 7:23 ` ZHU Yi (ST-FIR/ENG1-Zhu)
2017-11-20 11:11 ` Pankaj Bansal
2017-11-21 2:13 ` ZHU Yi (ST-FIR/ENG1-Zhu)
2017-11-21 2:37 ` Pankaj Bansal
2017-11-21 3:31 ` ZHU Yi (ST-FIR/ENG1-Zhu)
2017-11-21 10:01 ` Pankaj Bansal
2017-11-23 7:23 ` ZHU Yi (ST-FIR/ENG1-Zhu)
2017-11-21 12:43 ` Marc Kleine-Budde
2017-11-22 2:56 ` ZHU Yi (ST-FIR/ENG1-Zhu)
2017-11-22 6:27 ` Pankaj Bansal
2017-11-22 13:56 ` Marc Kleine-Budde
2017-11-22 11:59 ` Marc Kleine-Budde
2017-11-23 1:26 ` ZHU Yi (ST-FIR/ENG1-Zhu)
[not found] ` <CALw8SCUGuCmq+S_9-o-ZDYJuASveuj71WH97jYsEvNZX2N5ZXA@mail.gmail.com>
2017-11-23 20:17 ` Mirza Krak
2017-11-23 21:05 ` Wolfgang Grandegger
2017-11-24 16:02 ` Mirza Krak
2017-11-24 19:19 ` Wolfgang Grandegger
2017-11-26 21:11 ` Mirza Krak
2017-11-27 14:00 ` Marc Kleine-Budde
[not found] ` <CALw8SCVNqN0SM1e=bxXZFMVL0VN0iy0LgFj9Hv4BeRwAbb9Y6A@mail.gmail.com>
2017-11-28 22:11 ` Mirza Krak
2017-12-01 10:12 ` Mirza Krak [this message]
2017-12-01 10:32 ` Marc Kleine-Budde
2017-11-27 16:34 ` Stefan Agner
2017-11-14 15:24 ` [PATCH v2 1/2] can: flexcan: Remodel FlexCAN register r/w APIs for big endian FlexCAN controllers Marc Kleine-Budde
2017-11-16 5:24 ` Pankaj Bansal
2017-11-16 12:04 ` Marc Kleine-Budde
2017-11-21 12:18 ` Pankaj Bansal
2017-11-21 12:38 ` Marc Kleine-Budde
2017-11-23 9:09 ` [PATCH v3 " Pankaj Bansal
2017-11-23 9:09 ` [PATCH v3 2/2] can: flexcan: adding platform specific details for LS1021A Pankaj Bansal
2017-11-23 9:16 ` Marc Kleine-Budde
2017-11-23 10:01 ` Pankaj Bansal
2017-11-23 10:07 ` Marc Kleine-Budde
2017-11-23 12:01 ` Pankaj Bansal
2017-11-23 12:33 ` Marc Kleine-Budde
2017-11-23 9:18 ` [PATCH v3 1/2] can: flexcan: Remodel FlexCAN register r/w APIs for big endian FlexCAN controllers Marc Kleine-Budde
2017-11-23 9:55 ` Pankaj Bansal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CALw8SCWhBZnh8P5c0MzTw95-SHhROhi68gOnGRBr9K+6hb2A5w@mail.gmail.com \
--to=mirza.krak@gmail.com \
--cc=V.Sethi@nxp.com \
--cc=Yi.Zhu5@cn.bosch.com \
--cc=linux-can@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=pankaj.bansal@nxp.com \
--cc=poonam.aggrwal@nxp.com \
--cc=stefan@agner.ch \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.