* [RFC PATCH v4 1/5] dt-bindings: mfd: add entry for Marvell 88PM886 PMIC
2024-03-11 15:51 [RFC PATCH v4 0/5] initial support for Marvell 88PM886 PMIC Karel Balej
@ 2024-03-11 15:51 ` Karel Balej
2024-03-11 15:51 ` [RFC PATCH v4 2/5] mfd: add driver " Karel Balej
` (3 subsequent siblings)
4 siblings, 0 replies; 19+ messages in thread
From: Karel Balej @ 2024-03-11 15:51 UTC (permalink / raw)
To: Karel Balej, Lee Jones, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Dmitry Torokhov, Liam Girdwood, Mark Brown,
devicetree, linux-kernel, linux-input
Cc: Duje Mihanović, ~postmarketos/upstreaming, phone-devel
From: Karel Balej <balejk@matfyz.cz>
Marvell 88PM886 is a PMIC with several subdevices such as onkey,
regulators or battery and charger. It comes in at least two revisions,
A0 and A1 -- only A1 is described here at the moment.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Karel Balej <balejk@matfyz.cz>
---
Notes:
RFC v4:
- Address Krzysztof's comments:
- Fix regulators indentation.
- Add Krzysztof's trailer.
RFC v3:
- Add wakeup-source property.
- Address Rob's feedback:
- Move regulators into the MFD file.
- Remove interrupt-controller and #interrupt-cells properties.
RFC v2:
- Address Rob's feedback:
- Drop mention of 88PM880.
- Make sure the file passes bindings check (add the necessary header
and fix `interrupt-cells`).
- Other small changes.
- Add regulators. Changes with respect to the regulator RFC series:
- Address Krzysztof's comments:
- Drop unused compatible.
- Fix sub-node pattern.
.../bindings/mfd/marvell,88pm886-a1.yaml | 76 +++++++++++++++++++
1 file changed, 76 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/marvell,88pm886-a1.yaml
diff --git a/Documentation/devicetree/bindings/mfd/marvell,88pm886-a1.yaml b/Documentation/devicetree/bindings/mfd/marvell,88pm886-a1.yaml
new file mode 100644
index 000000000000..d6a71c912b76
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/marvell,88pm886-a1.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/marvell,88pm886-a1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell 88PM886 PMIC core
+
+maintainers:
+ - Karel Balej <balejk@matfyz.cz>
+
+description:
+ Marvell 88PM886 is a PMIC providing several functions such as onkey,
+ regulators or battery and charger.
+
+properties:
+ compatible:
+ const: marvell,88pm886-a1
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ wakeup-source: true
+
+ regulators:
+ type: object
+ additionalProperties: false
+ patternProperties:
+ "^(ldo(1[0-6]|[1-9])|buck[1-5])$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ description: LDO or buck regulator.
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pmic@30 {
+ compatible = "marvell,88pm886-a1";
+ reg = <0x30>;
+ interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ wakeup-source;
+
+ regulators {
+ ldo2: ldo2 {
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo15: ldo15 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ buck2: buck2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+ };
+ };
+...
--
2.44.0
^ permalink raw reply related [flat|nested] 19+ messages in thread* [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
2024-03-11 15:51 [RFC PATCH v4 0/5] initial support for Marvell 88PM886 PMIC Karel Balej
2024-03-11 15:51 ` [RFC PATCH v4 1/5] dt-bindings: mfd: add entry " Karel Balej
@ 2024-03-11 15:51 ` Karel Balej
2024-03-21 15:42 ` Lee Jones
2024-03-11 15:51 ` [RFC PATCH v4 3/5] regulator: add regulators " Karel Balej
` (2 subsequent siblings)
4 siblings, 1 reply; 19+ messages in thread
From: Karel Balej @ 2024-03-11 15:51 UTC (permalink / raw)
To: Karel Balej, Lee Jones, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Dmitry Torokhov, Liam Girdwood, Mark Brown,
devicetree, linux-kernel, linux-input
Cc: Duje Mihanović, ~postmarketos/upstreaming, phone-devel
From: Karel Balej <balejk@matfyz.cz>
Marvell 88PM886 is a PMIC which provides various functions such as
onkey, battery, charger and regulators. It is found for instance in the
samsung,coreprimevelte smartphone with which this was tested. Implement
basic support to allow for the use of regulators and onkey.
Signed-off-by: Karel Balej <balejk@matfyz.cz>
---
Notes:
RFC v4:
- Use MFD_CELL_* macros.
- Address Lee's feedback:
- Do not define regmap_config.val_bits and .reg_bits.
- Drop everything regulator related except mfd_cell (regmap
initialization, IDs enum etc.). Drop pm886_initialize_subregmaps.
- Do not store regmap pointers as an array as there is now only one
regmap. Also drop the corresponding enum.
- Move regmap_config to the header as it is needed in the regulators
driver.
- pm886_chip.whoami -> chip_id
- Reword chip ID mismatch error message and print the ID as
hexadecimal.
- Fix includes in include/linux/88pm886.h.
- Drop the pm886_irq_number enum and define the (for the moment) only
IRQ explicitly.
- Have only one MFD cell for all regulators as they are now registered
all at once in the regulators driver.
- Reword commit message.
- Make device table static and remove comma after the sentinel to signal
that nothing should come after it.
RFC v3:
- Drop onkey cell .of_compatible.
- Rename LDO page offset and regmap to REGULATORS.
RFC v2:
- Remove some abstraction.
- Sort includes alphabetically and add linux/of.h.
- Depend on OF, remove of_match_ptr and add MODULE_DEVICE_TABLE.
- Use more temporaries and break long lines.
- Do not initialize ret in probe.
- Use the wakeup-source DT property.
- Rename ret to err.
- Address Lee's comments:
- Drop patched in presets for base regmap and related defines.
- Use full sentences in comments.
- Remove IRQ comment.
- Define regmap_config member values.
- Rename data to sys_off_data.
- Add _PMIC suffix to Kconfig.
- Use dev_err_probe.
- Do not store irq_data.
- s/WHOAMI/CHIP_ID
- Drop LINUX part of include guard name.
- Merge in the regulator series modifications in order to have more
devices and modify the commit message accordingly. Changes with
respect to the original regulator series patches:
- ret -> err
- Add temporary for dev in pm88x_initialize_subregmaps.
- Drop of_compatible for the regulators.
- Do not duplicate LDO regmap for bucks.
- Rewrite commit message.
drivers/mfd/88pm886.c | 149 ++++++++++++++++++++++++++++++++++++
drivers/mfd/Kconfig | 12 +++
drivers/mfd/Makefile | 1 +
include/linux/mfd/88pm886.h | 38 +++++++++
4 files changed, 200 insertions(+)
create mode 100644 drivers/mfd/88pm886.c
create mode 100644 include/linux/mfd/88pm886.h
diff --git a/drivers/mfd/88pm886.c b/drivers/mfd/88pm886.c
new file mode 100644
index 000000000000..88f21f813ec1
--- /dev/null
+++ b/drivers/mfd/88pm886.c
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/88pm886.h>
+
+#define PM886_REG_INT_STATUS1 0x05
+
+#define PM886_REG_INT_ENA_1 0x0a
+#define PM886_INT_ENA1_ONKEY BIT(0)
+
+#define PM886_IRQ_ONKEY 0
+
+static struct regmap_irq pm886_regmap_irqs[] = {
+ REGMAP_IRQ_REG(PM886_IRQ_ONKEY, 0, PM886_INT_ENA1_ONKEY),
+};
+
+static struct regmap_irq_chip pm886_regmap_irq_chip = {
+ .name = "88pm886",
+ .irqs = pm886_regmap_irqs,
+ .num_irqs = ARRAY_SIZE(pm886_regmap_irqs),
+ .num_regs = 4,
+ .status_base = PM886_REG_INT_STATUS1,
+ .ack_base = PM886_REG_INT_STATUS1,
+ .unmask_base = PM886_REG_INT_ENA_1,
+};
+
+static struct resource pm886_onkey_resources[] = {
+ DEFINE_RES_IRQ_NAMED(PM886_IRQ_ONKEY, "88pm886-onkey"),
+};
+
+static struct mfd_cell pm886_devs[] = {
+ MFD_CELL_RES("88pm886-onkey", pm886_onkey_resources),
+ MFD_CELL_NAME("88pm886-regulator"),
+};
+
+static int pm886_power_off_handler(struct sys_off_data *sys_off_data)
+{
+ struct pm886_chip *chip = sys_off_data->cb_data;
+ struct regmap *regmap = chip->regmap;
+ struct device *dev = &chip->client->dev;
+ int err;
+
+ err = regmap_update_bits(regmap, PM886_REG_MISC_CONFIG1, PM886_SW_PDOWN,
+ PM886_SW_PDOWN);
+ if (err) {
+ dev_err(dev, "Failed to power off the device: %d\n", err);
+ return NOTIFY_BAD;
+ }
+ return NOTIFY_DONE;
+}
+
+static int pm886_setup_irq(struct pm886_chip *chip,
+ struct regmap_irq_chip_data **irq_data)
+{
+ struct regmap *regmap = chip->regmap;
+ struct device *dev = &chip->client->dev;
+ int err;
+
+ /* Set interrupt clearing mode to clear on write. */
+ err = regmap_update_bits(regmap, PM886_REG_MISC_CONFIG2,
+ PM886_INT_INV | PM886_INT_CLEAR | PM886_INT_MASK_MODE,
+ PM886_INT_WC);
+ if (err) {
+ dev_err(dev, "Failed to set interrupt clearing mode: %d\n", err);
+ return err;
+ }
+
+ err = devm_regmap_add_irq_chip(dev, regmap, chip->client->irq,
+ IRQF_ONESHOT, -1, &pm886_regmap_irq_chip,
+ irq_data);
+ if (err) {
+ dev_err(dev, "Failed to request IRQ: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static int pm886_probe(struct i2c_client *client)
+{
+ struct regmap_irq_chip_data *irq_data;
+ struct device *dev = &client->dev;
+ struct pm886_chip *chip;
+ struct regmap *regmap;
+ unsigned int chip_id;
+ int err;
+
+ chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->client = client;
+ chip->chip_id = (uintptr_t)device_get_match_data(dev);
+ i2c_set_clientdata(client, chip);
+
+ regmap = devm_regmap_init_i2c(client, &pm886_i2c_regmap);
+ if (IS_ERR(regmap))
+ return dev_err_probe(dev, PTR_ERR(regmap), "Failed to initialize regmap\n");
+ chip->regmap = regmap;
+
+ err = regmap_read(regmap, PM886_REG_ID, &chip_id);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to read chip ID\n");
+
+ if (chip->chip_id != chip_id)
+ return dev_err_probe(dev, -EINVAL, "Unsupported chip: 0x%x\n", chip_id);
+
+ err = pm886_setup_irq(chip, &irq_data);
+ if (err)
+ return err;
+
+ err = devm_mfd_add_devices(dev, 0, pm886_devs, ARRAY_SIZE(pm886_devs),
+ NULL, 0, regmap_irq_get_domain(irq_data));
+ if (err)
+ return dev_err_probe(dev, err, "Failed to add devices\n");
+
+ err = devm_register_power_off_handler(dev, pm886_power_off_handler, chip);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to register power off handler\n");
+
+ device_init_wakeup(dev, device_property_read_bool(dev, "wakeup-source"));
+
+ return 0;
+}
+
+static const struct of_device_id pm886_of_match[] = {
+ { .compatible = "marvell,88pm886-a1", .data = (void *)PM886_A1_CHIP_ID },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pm886_of_match);
+
+static struct i2c_driver pm886_i2c_driver = {
+ .driver = {
+ .name = "88pm886",
+ .of_match_table = pm886_of_match,
+ },
+ .probe = pm886_probe,
+};
+module_i2c_driver(pm886_i2c_driver);
+
+MODULE_DESCRIPTION("Marvell 88PM886 PMIC driver");
+MODULE_AUTHOR("Karel Balej <balejk@matfyz.cz>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index e7a6e45b9fac..9ef921c59f30 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -794,6 +794,18 @@ config MFD_88PM860X
select individual components like voltage regulators, RTC and
battery-charger under the corresponding menus.
+config MFD_88PM886_PMIC
+ bool "Marvell 88PM886 PMIC"
+ depends on I2C=y
+ depends on OF
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ select MFD_CORE
+ help
+ This enables support for Marvell 88PM886 Power Management IC.
+ This includes the I2C driver and the core APIs _only_, you have to
+ select individual components like onkey under the corresponding menus.
+
config MFD_MAX14577
tristate "Maxim Semiconductor MAX14577/77836 MUIC + Charger Support"
depends on I2C
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index c66f07edcd0e..d016b7fed354 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -7,6 +7,7 @@
obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o
obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o
obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o
+obj-$(CONFIG_MFD_88PM886_PMIC) += 88pm886.o
obj-$(CONFIG_MFD_ACT8945A) += act8945a.o
obj-$(CONFIG_MFD_SM501) += sm501.o
obj-$(CONFIG_ARCH_BCM2835) += bcm2835-pm.o
diff --git a/include/linux/mfd/88pm886.h b/include/linux/mfd/88pm886.h
new file mode 100644
index 000000000000..a5e6524bb19d
--- /dev/null
+++ b/include/linux/mfd/88pm886.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __MFD_88PM886_H
+#define __MFD_88PM886_H
+
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+#define PM886_A1_CHIP_ID 0xa1
+
+#define PM886_REGMAP_CONF_MAX_REG 0xfe
+
+#define PM886_REG_ID 0x00
+
+#define PM886_REG_STATUS1 0x01
+#define PM886_ONKEY_STS1 BIT(0)
+
+#define PM886_REG_MISC_CONFIG1 0x14
+#define PM886_SW_PDOWN BIT(5)
+
+#define PM886_REG_MISC_CONFIG2 0x15
+#define PM886_INT_INV BIT(0)
+#define PM886_INT_CLEAR BIT(1)
+#define PM886_INT_RC 0x00
+#define PM886_INT_WC BIT(1)
+#define PM886_INT_MASK_MODE BIT(2)
+
+struct pm886_chip {
+ struct i2c_client *client;
+ unsigned int chip_id;
+ struct regmap *regmap;
+};
+
+static const struct regmap_config pm886_i2c_regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = PM886_REGMAP_CONF_MAX_REG,
+};
+#endif /* __MFD_88PM886_H */
--
2.44.0
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
2024-03-11 15:51 ` [RFC PATCH v4 2/5] mfd: add driver " Karel Balej
@ 2024-03-21 15:42 ` Lee Jones
2024-03-21 16:12 ` Karel Balej
0 siblings, 1 reply; 19+ messages in thread
From: Lee Jones @ 2024-03-21 15:42 UTC (permalink / raw)
To: Karel Balej
Cc: Karel Balej, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Dmitry Torokhov, Liam Girdwood, Mark Brown, devicetree,
linux-kernel, linux-input, Duje Mihanović,
~postmarketos/upstreaming, phone-devel
On Mon, 11 Mar 2024, Karel Balej wrote:
> From: Karel Balej <balejk@matfyz.cz>
>
> Marvell 88PM886 is a PMIC which provides various functions such as
> onkey, battery, charger and regulators. It is found for instance in the
> samsung,coreprimevelte smartphone with which this was tested. Implement
> basic support to allow for the use of regulators and onkey.
>
> Signed-off-by: Karel Balej <balejk@matfyz.cz>
> ---
>
> Notes:
> RFC v4:
> - Use MFD_CELL_* macros.
> - Address Lee's feedback:
> - Do not define regmap_config.val_bits and .reg_bits.
> - Drop everything regulator related except mfd_cell (regmap
> initialization, IDs enum etc.). Drop pm886_initialize_subregmaps.
> - Do not store regmap pointers as an array as there is now only one
> regmap. Also drop the corresponding enum.
> - Move regmap_config to the header as it is needed in the regulators
> driver.
> - pm886_chip.whoami -> chip_id
> - Reword chip ID mismatch error message and print the ID as
> hexadecimal.
> - Fix includes in include/linux/88pm886.h.
> - Drop the pm886_irq_number enum and define the (for the moment) only
> IRQ explicitly.
> - Have only one MFD cell for all regulators as they are now registered
> all at once in the regulators driver.
> - Reword commit message.
> - Make device table static and remove comma after the sentinel to signal
> that nothing should come after it.
> RFC v3:
> - Drop onkey cell .of_compatible.
> - Rename LDO page offset and regmap to REGULATORS.
> RFC v2:
> - Remove some abstraction.
> - Sort includes alphabetically and add linux/of.h.
> - Depend on OF, remove of_match_ptr and add MODULE_DEVICE_TABLE.
> - Use more temporaries and break long lines.
> - Do not initialize ret in probe.
> - Use the wakeup-source DT property.
> - Rename ret to err.
> - Address Lee's comments:
> - Drop patched in presets for base regmap and related defines.
> - Use full sentences in comments.
> - Remove IRQ comment.
> - Define regmap_config member values.
> - Rename data to sys_off_data.
> - Add _PMIC suffix to Kconfig.
> - Use dev_err_probe.
> - Do not store irq_data.
> - s/WHOAMI/CHIP_ID
> - Drop LINUX part of include guard name.
> - Merge in the regulator series modifications in order to have more
> devices and modify the commit message accordingly. Changes with
> respect to the original regulator series patches:
> - ret -> err
> - Add temporary for dev in pm88x_initialize_subregmaps.
> - Drop of_compatible for the regulators.
> - Do not duplicate LDO regmap for bucks.
> - Rewrite commit message.
>
> drivers/mfd/88pm886.c | 149 ++++++++++++++++++++++++++++++++++++
> drivers/mfd/Kconfig | 12 +++
> drivers/mfd/Makefile | 1 +
> include/linux/mfd/88pm886.h | 38 +++++++++
> 4 files changed, 200 insertions(+)
> create mode 100644 drivers/mfd/88pm886.c
> create mode 100644 include/linux/mfd/88pm886.h
Looks mostly okay.
> diff --git a/include/linux/mfd/88pm886.h b/include/linux/mfd/88pm886.h
> new file mode 100644
> index 000000000000..a5e6524bb19d
> --- /dev/null
> +++ b/include/linux/mfd/88pm886.h
> @@ -0,0 +1,38 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +#ifndef __MFD_88PM886_H
> +#define __MFD_88PM886_H
> +
> +#include <linux/i2c.h>
> +#include <linux/regmap.h>
> +
> +#define PM886_A1_CHIP_ID 0xa1
> +
> +#define PM886_REGMAP_CONF_MAX_REG 0xfe
> +
> +#define PM886_REG_ID 0x00
> +
> +#define PM886_REG_STATUS1 0x01
> +#define PM886_ONKEY_STS1 BIT(0)
> +
> +#define PM886_REG_MISC_CONFIG1 0x14
> +#define PM886_SW_PDOWN BIT(5)
> +
> +#define PM886_REG_MISC_CONFIG2 0x15
> +#define PM886_INT_INV BIT(0)
> +#define PM886_INT_CLEAR BIT(1)
> +#define PM886_INT_RC 0x00
> +#define PM886_INT_WC BIT(1)
> +#define PM886_INT_MASK_MODE BIT(2)
> +
> +struct pm886_chip {
> + struct i2c_client *client;
> + unsigned int chip_id;
> + struct regmap *regmap;
> +};
> +
> +static const struct regmap_config pm886_i2c_regmap = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = PM886_REGMAP_CONF_MAX_REG,
> +};
Why is this in here?
> +#endif /* __MFD_88PM886_H */
What would you like me to do with this RFC patch?
--
Lee Jones [李琼斯]
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
2024-03-21 15:42 ` Lee Jones
@ 2024-03-21 16:12 ` Karel Balej
2024-03-21 16:20 ` Lee Jones
0 siblings, 1 reply; 19+ messages in thread
From: Karel Balej @ 2024-03-21 16:12 UTC (permalink / raw)
To: Lee Jones
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Dmitry Torokhov,
Liam Girdwood, Mark Brown, devicetree, linux-kernel, linux-input,
Duje Mihanović,
~postmarketos/upstreaming, phone-devel
Lee Jones, 2024-03-21T15:42:11+00:00:
> On Mon, 11 Mar 2024, Karel Balej wrote:
>
> > From: Karel Balej <balejk@matfyz.cz>
> >
> > Marvell 88PM886 is a PMIC which provides various functions such as
> > onkey, battery, charger and regulators. It is found for instance in the
> > samsung,coreprimevelte smartphone with which this was tested. Implement
> > basic support to allow for the use of regulators and onkey.
> >
> > Signed-off-by: Karel Balej <balejk@matfyz.cz>
> > ---
> >
> > Notes:
> > RFC v4:
> > - Use MFD_CELL_* macros.
> > - Address Lee's feedback:
> > - Do not define regmap_config.val_bits and .reg_bits.
> > - Drop everything regulator related except mfd_cell (regmap
> > initialization, IDs enum etc.). Drop pm886_initialize_subregmaps.
> > - Do not store regmap pointers as an array as there is now only one
> > regmap. Also drop the corresponding enum.
> > - Move regmap_config to the header as it is needed in the regulators
> > driver.
> > - pm886_chip.whoami -> chip_id
> > - Reword chip ID mismatch error message and print the ID as
> > hexadecimal.
> > - Fix includes in include/linux/88pm886.h.
> > - Drop the pm886_irq_number enum and define the (for the moment) only
> > IRQ explicitly.
> > - Have only one MFD cell for all regulators as they are now registered
> > all at once in the regulators driver.
> > - Reword commit message.
> > - Make device table static and remove comma after the sentinel to signal
> > that nothing should come after it.
> > RFC v3:
> > - Drop onkey cell .of_compatible.
> > - Rename LDO page offset and regmap to REGULATORS.
> > RFC v2:
> > - Remove some abstraction.
> > - Sort includes alphabetically and add linux/of.h.
> > - Depend on OF, remove of_match_ptr and add MODULE_DEVICE_TABLE.
> > - Use more temporaries and break long lines.
> > - Do not initialize ret in probe.
> > - Use the wakeup-source DT property.
> > - Rename ret to err.
> > - Address Lee's comments:
> > - Drop patched in presets for base regmap and related defines.
> > - Use full sentences in comments.
> > - Remove IRQ comment.
> > - Define regmap_config member values.
> > - Rename data to sys_off_data.
> > - Add _PMIC suffix to Kconfig.
> > - Use dev_err_probe.
> > - Do not store irq_data.
> > - s/WHOAMI/CHIP_ID
> > - Drop LINUX part of include guard name.
> > - Merge in the regulator series modifications in order to have more
> > devices and modify the commit message accordingly. Changes with
> > respect to the original regulator series patches:
> > - ret -> err
> > - Add temporary for dev in pm88x_initialize_subregmaps.
> > - Drop of_compatible for the regulators.
> > - Do not duplicate LDO regmap for bucks.
> > - Rewrite commit message.
> >
> > drivers/mfd/88pm886.c | 149 ++++++++++++++++++++++++++++++++++++
> > drivers/mfd/Kconfig | 12 +++
> > drivers/mfd/Makefile | 1 +
> > include/linux/mfd/88pm886.h | 38 +++++++++
> > 4 files changed, 200 insertions(+)
> > create mode 100644 drivers/mfd/88pm886.c
> > create mode 100644 include/linux/mfd/88pm886.h
>
> Looks mostly okay.
>
> > diff --git a/include/linux/mfd/88pm886.h b/include/linux/mfd/88pm886.h
> > new file mode 100644
> > index 000000000000..a5e6524bb19d
> > --- /dev/null
> > +++ b/include/linux/mfd/88pm886.h
> > @@ -0,0 +1,38 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +#ifndef __MFD_88PM886_H
> > +#define __MFD_88PM886_H
> > +
> > +#include <linux/i2c.h>
> > +#include <linux/regmap.h>
> > +
> > +#define PM886_A1_CHIP_ID 0xa1
> > +
> > +#define PM886_REGMAP_CONF_MAX_REG 0xfe
> > +
> > +#define PM886_REG_ID 0x00
> > +
> > +#define PM886_REG_STATUS1 0x01
> > +#define PM886_ONKEY_STS1 BIT(0)
> > +
> > +#define PM886_REG_MISC_CONFIG1 0x14
> > +#define PM886_SW_PDOWN BIT(5)
> > +
> > +#define PM886_REG_MISC_CONFIG2 0x15
> > +#define PM886_INT_INV BIT(0)
> > +#define PM886_INT_CLEAR BIT(1)
> > +#define PM886_INT_RC 0x00
> > +#define PM886_INT_WC BIT(1)
> > +#define PM886_INT_MASK_MODE BIT(2)
> > +
> > +struct pm886_chip {
> > + struct i2c_client *client;
> > + unsigned int chip_id;
> > + struct regmap *regmap;
> > +};
> > +
> > +static const struct regmap_config pm886_i2c_regmap = {
> > + .reg_bits = 8,
> > + .val_bits = 8,
> > + .max_register = PM886_REGMAP_CONF_MAX_REG,
> > +};
>
> Why is this in here?
Because since I moved the regulators regmap initialization into the
regulators driver, I need to access it from there.
> What would you like me to do with this RFC patch?
I was hoping that you would take this through the MFD tree (after the
regulator subsystem maintainers approve the regulators driver).
I have added the remaining regulators to the driver just today and plan
to send the first non-RFC version of the series after I test it, likely
over the weekend. Hopefully the regulators patch will finally get some
attention then.
Thank you, best regards,
K. B.
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
2024-03-21 16:12 ` Karel Balej
@ 2024-03-21 16:20 ` Lee Jones
2024-03-21 16:55 ` Karel Balej
0 siblings, 1 reply; 19+ messages in thread
From: Lee Jones @ 2024-03-21 16:20 UTC (permalink / raw)
To: Karel Balej
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Dmitry Torokhov,
Liam Girdwood, Mark Brown, devicetree, linux-kernel, linux-input,
Duje Mihanović,
~postmarketos/upstreaming, phone-devel
On Thu, 21 Mar 2024, Karel Balej wrote:
> Lee Jones, 2024-03-21T15:42:11+00:00:
> > On Mon, 11 Mar 2024, Karel Balej wrote:
> >
> > > From: Karel Balej <balejk@matfyz.cz>
> > >
> > > Marvell 88PM886 is a PMIC which provides various functions such as
> > > onkey, battery, charger and regulators. It is found for instance in the
> > > samsung,coreprimevelte smartphone with which this was tested. Implement
> > > basic support to allow for the use of regulators and onkey.
> > >
> > > Signed-off-by: Karel Balej <balejk@matfyz.cz>
> > > ---
> > >
> > > Notes:
> > > RFC v4:
> > > - Use MFD_CELL_* macros.
> > > - Address Lee's feedback:
> > > - Do not define regmap_config.val_bits and .reg_bits.
> > > - Drop everything regulator related except mfd_cell (regmap
> > > initialization, IDs enum etc.). Drop pm886_initialize_subregmaps.
> > > - Do not store regmap pointers as an array as there is now only one
> > > regmap. Also drop the corresponding enum.
> > > - Move regmap_config to the header as it is needed in the regulators
> > > driver.
> > > - pm886_chip.whoami -> chip_id
> > > - Reword chip ID mismatch error message and print the ID as
> > > hexadecimal.
> > > - Fix includes in include/linux/88pm886.h.
> > > - Drop the pm886_irq_number enum and define the (for the moment) only
> > > IRQ explicitly.
> > > - Have only one MFD cell for all regulators as they are now registered
> > > all at once in the regulators driver.
> > > - Reword commit message.
> > > - Make device table static and remove comma after the sentinel to signal
> > > that nothing should come after it.
> > > RFC v3:
> > > - Drop onkey cell .of_compatible.
> > > - Rename LDO page offset and regmap to REGULATORS.
> > > RFC v2:
> > > - Remove some abstraction.
> > > - Sort includes alphabetically and add linux/of.h.
> > > - Depend on OF, remove of_match_ptr and add MODULE_DEVICE_TABLE.
> > > - Use more temporaries and break long lines.
> > > - Do not initialize ret in probe.
> > > - Use the wakeup-source DT property.
> > > - Rename ret to err.
> > > - Address Lee's comments:
> > > - Drop patched in presets for base regmap and related defines.
> > > - Use full sentences in comments.
> > > - Remove IRQ comment.
> > > - Define regmap_config member values.
> > > - Rename data to sys_off_data.
> > > - Add _PMIC suffix to Kconfig.
> > > - Use dev_err_probe.
> > > - Do not store irq_data.
> > > - s/WHOAMI/CHIP_ID
> > > - Drop LINUX part of include guard name.
> > > - Merge in the regulator series modifications in order to have more
> > > devices and modify the commit message accordingly. Changes with
> > > respect to the original regulator series patches:
> > > - ret -> err
> > > - Add temporary for dev in pm88x_initialize_subregmaps.
> > > - Drop of_compatible for the regulators.
> > > - Do not duplicate LDO regmap for bucks.
> > > - Rewrite commit message.
> > >
> > > drivers/mfd/88pm886.c | 149 ++++++++++++++++++++++++++++++++++++
> > > drivers/mfd/Kconfig | 12 +++
> > > drivers/mfd/Makefile | 1 +
> > > include/linux/mfd/88pm886.h | 38 +++++++++
> > > 4 files changed, 200 insertions(+)
> > > create mode 100644 drivers/mfd/88pm886.c
> > > create mode 100644 include/linux/mfd/88pm886.h
> >
> > Looks mostly okay.
> >
> > > diff --git a/include/linux/mfd/88pm886.h b/include/linux/mfd/88pm886.h
> > > new file mode 100644
> > > index 000000000000..a5e6524bb19d
> > > --- /dev/null
> > > +++ b/include/linux/mfd/88pm886.h
> > > @@ -0,0 +1,38 @@
> > > +/* SPDX-License-Identifier: GPL-2.0-only */
> > > +#ifndef __MFD_88PM886_H
> > > +#define __MFD_88PM886_H
> > > +
> > > +#include <linux/i2c.h>
> > > +#include <linux/regmap.h>
> > > +
> > > +#define PM886_A1_CHIP_ID 0xa1
> > > +
> > > +#define PM886_REGMAP_CONF_MAX_REG 0xfe
> > > +
> > > +#define PM886_REG_ID 0x00
> > > +
> > > +#define PM886_REG_STATUS1 0x01
> > > +#define PM886_ONKEY_STS1 BIT(0)
> > > +
> > > +#define PM886_REG_MISC_CONFIG1 0x14
> > > +#define PM886_SW_PDOWN BIT(5)
> > > +
> > > +#define PM886_REG_MISC_CONFIG2 0x15
> > > +#define PM886_INT_INV BIT(0)
> > > +#define PM886_INT_CLEAR BIT(1)
> > > +#define PM886_INT_RC 0x00
> > > +#define PM886_INT_WC BIT(1)
> > > +#define PM886_INT_MASK_MODE BIT(2)
> > > +
> > > +struct pm886_chip {
> > > + struct i2c_client *client;
> > > + unsigned int chip_id;
> > > + struct regmap *regmap;
> > > +};
> > > +
> > > +static const struct regmap_config pm886_i2c_regmap = {
> > > + .reg_bits = 8,
> > > + .val_bits = 8,
> > > + .max_register = PM886_REGMAP_CONF_MAX_REG,
> > > +};
> >
> > Why is this in here?
>
> Because since I moved the regulators regmap initialization into the
> regulators driver, I need to access it from there.
So move it into the regulators driver?
> > What would you like me to do with this RFC patch?
>
> I was hoping that you would take this through the MFD tree (after the
> regulator subsystem maintainers approve the regulators driver).
>
> I have added the remaining regulators to the driver just today and plan
> to send the first non-RFC version of the series after I test it, likely
> over the weekend. Hopefully the regulators patch will finally get some
> attention then.
Don't forget that the merge-window is open.
Many maintainers take a well deserved nap during this period.
--
Lee Jones [李琼斯]
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
2024-03-21 16:20 ` Lee Jones
@ 2024-03-21 16:55 ` Karel Balej
2024-03-21 16:58 ` Mark Brown
0 siblings, 1 reply; 19+ messages in thread
From: Karel Balej @ 2024-03-21 16:55 UTC (permalink / raw)
To: Lee Jones
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Dmitry Torokhov,
Liam Girdwood, Mark Brown, devicetree, linux-kernel, linux-input,
Duje Mihanović,
~postmarketos/upstreaming, phone-devel
Lee Jones, 2024-03-21T16:20:45+00:00:
> On Thu, 21 Mar 2024, Karel Balej wrote:
>
> > Lee Jones, 2024-03-21T15:42:11+00:00:
> > > On Mon, 11 Mar 2024, Karel Balej wrote:
> > > > diff --git a/include/linux/mfd/88pm886.h b/include/linux/mfd/88pm886.h
> > > > new file mode 100644
> > > > index 000000000000..a5e6524bb19d
> > > > --- /dev/null
> > > > +++ b/include/linux/mfd/88pm886.h
> > > > @@ -0,0 +1,38 @@
> > > > +/* SPDX-License-Identifier: GPL-2.0-only */
> > > > +#ifndef __MFD_88PM886_H
> > > > +#define __MFD_88PM886_H
> > > > +
> > > > +#include <linux/i2c.h>
> > > > +#include <linux/regmap.h>
> > > > +
> > > > +#define PM886_A1_CHIP_ID 0xa1
> > > > +
> > > > +#define PM886_REGMAP_CONF_MAX_REG 0xfe
> > > > +
> > > > +#define PM886_REG_ID 0x00
> > > > +
> > > > +#define PM886_REG_STATUS1 0x01
> > > > +#define PM886_ONKEY_STS1 BIT(0)
> > > > +
> > > > +#define PM886_REG_MISC_CONFIG1 0x14
> > > > +#define PM886_SW_PDOWN BIT(5)
> > > > +
> > > > +#define PM886_REG_MISC_CONFIG2 0x15
> > > > +#define PM886_INT_INV BIT(0)
> > > > +#define PM886_INT_CLEAR BIT(1)
> > > > +#define PM886_INT_RC 0x00
> > > > +#define PM886_INT_WC BIT(1)
> > > > +#define PM886_INT_MASK_MODE BIT(2)
> > > > +
> > > > +struct pm886_chip {
> > > > + struct i2c_client *client;
> > > > + unsigned int chip_id;
> > > > + struct regmap *regmap;
> > > > +};
> > > > +
> > > > +static const struct regmap_config pm886_i2c_regmap = {
> > > > + .reg_bits = 8,
> > > > + .val_bits = 8,
> > > > + .max_register = PM886_REGMAP_CONF_MAX_REG,
> > > > +};
> > >
> > > Why is this in here?
> >
> > Because since I moved the regulators regmap initialization into the
> > regulators driver, I need to access it from there.
>
> So move it into the regulators driver?
It is used in the MFD driver too for the base regmap.
K. B.
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
2024-03-21 16:55 ` Karel Balej
@ 2024-03-21 16:58 ` Mark Brown
2024-03-21 17:08 ` Karel Balej
0 siblings, 1 reply; 19+ messages in thread
From: Mark Brown @ 2024-03-21 16:58 UTC (permalink / raw)
To: Karel Balej
Cc: Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Dmitry Torokhov, Liam Girdwood, devicetree, linux-kernel,
linux-input, Duje Mihanović,
~postmarketos/upstreaming, phone-devel
[-- Attachment #1: Type: text/plain, Size: 713 bytes --]
On Thu, Mar 21, 2024 at 05:55:17PM +0100, Karel Balej wrote:
> Lee Jones, 2024-03-21T16:20:45+00:00:
> > On Thu, 21 Mar 2024, Karel Balej wrote:
> > > > > +static const struct regmap_config pm886_i2c_regmap = {
> > > > > + .reg_bits = 8,
> > > > > + .val_bits = 8,
> > > > > + .max_register = PM886_REGMAP_CONF_MAX_REG,
> > > > > +};
> > > > Why is this in here?
> > > Because since I moved the regulators regmap initialization into the
> > > regulators driver, I need to access it from there.
> > So move it into the regulators driver?
> It is used in the MFD driver too for the base regmap.
You shouldn't be creating two regmaps for the same set of registers,
that just opens the potential for confusion.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
2024-03-21 16:58 ` Mark Brown
@ 2024-03-21 17:08 ` Karel Balej
2024-03-21 17:17 ` Mark Brown
0 siblings, 1 reply; 19+ messages in thread
From: Karel Balej @ 2024-03-21 17:08 UTC (permalink / raw)
To: Mark Brown
Cc: Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Dmitry Torokhov, Liam Girdwood, devicetree, linux-kernel,
linux-input, Duje Mihanović,
~postmarketos/upstreaming, phone-devel
Mark Brown, 2024-03-21T16:58:44+00:00:
> On Thu, Mar 21, 2024 at 05:55:17PM +0100, Karel Balej wrote:
> > Lee Jones, 2024-03-21T16:20:45+00:00:
> > > On Thu, 21 Mar 2024, Karel Balej wrote:
>
> > > > > > +static const struct regmap_config pm886_i2c_regmap = {
> > > > > > + .reg_bits = 8,
> > > > > > + .val_bits = 8,
> > > > > > + .max_register = PM886_REGMAP_CONF_MAX_REG,
> > > > > > +};
>
> > > > > Why is this in here?
>
> > > > Because since I moved the regulators regmap initialization into the
> > > > regulators driver, I need to access it from there.
>
> > > So move it into the regulators driver?
>
> > It is used in the MFD driver too for the base regmap.
>
> You shouldn't be creating two regmaps for the same set of registers,
> that just opens the potential for confusion.
Just the regmap config is the same. Otherwise, each regmap lives at a
different I2C address.
Regards,
K. B.
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
2024-03-21 17:08 ` Karel Balej
@ 2024-03-21 17:17 ` Mark Brown
2024-03-21 17:32 ` Karel Balej
0 siblings, 1 reply; 19+ messages in thread
From: Mark Brown @ 2024-03-21 17:17 UTC (permalink / raw)
To: Karel Balej
Cc: Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Dmitry Torokhov, Liam Girdwood, devicetree, linux-kernel,
linux-input, Duje Mihanović,
~postmarketos/upstreaming, phone-devel
[-- Attachment #1: Type: text/plain, Size: 594 bytes --]
On Thu, Mar 21, 2024 at 06:08:16PM +0100, Karel Balej wrote:
> Mark Brown, 2024-03-21T16:58:44+00:00:
> > > > > > > +static const struct regmap_config pm886_i2c_regmap = {
> > > > > > > + .reg_bits = 8,
> > > > > > > + .val_bits = 8,
> > > > > > > + .max_register = PM886_REGMAP_CONF_MAX_REG,
> > > > > > > +};
...
> > You shouldn't be creating two regmaps for the same set of registers,
> > that just opens the potential for confusion.
> Just the regmap config is the same. Otherwise, each regmap lives at a
> different I2C address.
Do they both genuinely have the same maximum register?
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
2024-03-21 17:17 ` Mark Brown
@ 2024-03-21 17:32 ` Karel Balej
2024-03-21 17:48 ` Mark Brown
0 siblings, 1 reply; 19+ messages in thread
From: Karel Balej @ 2024-03-21 17:32 UTC (permalink / raw)
To: Mark Brown
Cc: Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Dmitry Torokhov, Liam Girdwood, devicetree, linux-kernel,
linux-input, Duje Mihanović,
~postmarketos/upstreaming, phone-devel
Mark Brown, 2024-03-21T17:17:40+00:00:
> On Thu, Mar 21, 2024 at 06:08:16PM +0100, Karel Balej wrote:
> > Mark Brown, 2024-03-21T16:58:44+00:00:
>
> > > > > > > > +static const struct regmap_config pm886_i2c_regmap = {
> > > > > > > > + .reg_bits = 8,
> > > > > > > > + .val_bits = 8,
> > > > > > > > + .max_register = PM886_REGMAP_CONF_MAX_REG,
> > > > > > > > +};
>
> ...
>
> > > You shouldn't be creating two regmaps for the same set of registers,
> > > that just opens the potential for confusion.
>
> > Just the regmap config is the same. Otherwise, each regmap lives at a
> > different I2C address.
>
> Do they both genuinely have the same maximum register?
They do according to the downstream driver which is my only reference.
In fact, there the driver defines the configs separately for each regmap
but with the same values.
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
2024-03-21 17:32 ` Karel Balej
@ 2024-03-21 17:48 ` Mark Brown
2024-03-21 18:16 ` Karel Balej
0 siblings, 1 reply; 19+ messages in thread
From: Mark Brown @ 2024-03-21 17:48 UTC (permalink / raw)
To: Karel Balej
Cc: Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Dmitry Torokhov, Liam Girdwood, devicetree, linux-kernel,
linux-input, Duje Mihanović,
~postmarketos/upstreaming, phone-devel
[-- Attachment #1: Type: text/plain, Size: 545 bytes --]
On Thu, Mar 21, 2024 at 06:32:03PM +0100, Karel Balej wrote:
> Mark Brown, 2024-03-21T17:17:40+00:00:
> > Do they both genuinely have the same maximum register?
> They do according to the downstream driver which is my only reference.
> In fact, there the driver defines the configs separately for each regmap
> but with the same values.
This is a downstream driver - are you sure it's got the best code
quality? I'm not seeing any references to registers with numbers as
high as the maximum register that's there in your driver for example.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
2024-03-21 17:48 ` Mark Brown
@ 2024-03-21 18:16 ` Karel Balej
2024-03-21 19:00 ` Mark Brown
0 siblings, 1 reply; 19+ messages in thread
From: Karel Balej @ 2024-03-21 18:16 UTC (permalink / raw)
To: Mark Brown
Cc: Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Dmitry Torokhov, Liam Girdwood, devicetree, linux-kernel,
linux-input, Duje Mihanović,
~postmarketos/upstreaming, phone-devel
Mark Brown, 2024-03-21T17:48:28+00:00:
> On Thu, Mar 21, 2024 at 06:32:03PM +0100, Karel Balej wrote:
> > Mark Brown, 2024-03-21T17:17:40+00:00:
>
> > > Do they both genuinely have the same maximum register?
>
> > They do according to the downstream driver which is my only reference.
> > In fact, there the driver defines the configs separately for each regmap
> > but with the same values.
>
> This is a downstream driver - are you sure it's got the best code
> quality?
No, that is why I have rewritten it and tried to improve on this. But
like I said, it is my only reference. Is there some other way to verify
this value (besides perhaps the datasheet)?
> I'm not seeing any references to registers with numbers as high as the
> maximum register that's there in your driver for example.
Indeed, I have performed the same check with the same findings. But that
doesn't necessarily mean that the maximum should be lower, no?
Do you have some specific modifications of my code in mind regarding
this?
Thank you,
K. B.
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
2024-03-21 18:16 ` Karel Balej
@ 2024-03-21 19:00 ` Mark Brown
2024-03-21 19:14 ` Karel Balej
0 siblings, 1 reply; 19+ messages in thread
From: Mark Brown @ 2024-03-21 19:00 UTC (permalink / raw)
To: Karel Balej
Cc: Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Dmitry Torokhov, Liam Girdwood, devicetree, linux-kernel,
linux-input, Duje Mihanović,
~postmarketos/upstreaming, phone-devel
[-- Attachment #1: Type: text/plain, Size: 1300 bytes --]
On Thu, Mar 21, 2024 at 07:16:43PM +0100, Karel Balej wrote:
> Mark Brown, 2024-03-21T17:48:28+00:00:
> > > They do according to the downstream driver which is my only reference.
> > > In fact, there the driver defines the configs separately for each regmap
> > > but with the same values.
> > This is a downstream driver - are you sure it's got the best code
> > quality?
> No, that is why I have rewritten it and tried to improve on this. But
> like I said, it is my only reference. Is there some other way to verify
> this value (besides perhaps the datasheet)?
The maximum register is whatever the maximum register we know about for
the device is, the datasheet is generally a good reference there.
> > I'm not seeing any references to registers with numbers as high as the
> > maximum register that's there in your driver for example.
> Indeed, I have performed the same check with the same findings. But that
> doesn't necessarily mean that the maximum should be lower, no?
> Do you have some specific modifications of my code in mind regarding
> this?
I would expect that if you have two separate register maps they would
have separate configurations that describe the corresponding physical
register maps, as far as I can tell this driver is just making up a
maximum register number.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
2024-03-21 19:00 ` Mark Brown
@ 2024-03-21 19:14 ` Karel Balej
2024-03-21 19:32 ` Mark Brown
0 siblings, 1 reply; 19+ messages in thread
From: Karel Balej @ 2024-03-21 19:14 UTC (permalink / raw)
To: Mark Brown
Cc: Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Dmitry Torokhov, Liam Girdwood, devicetree, linux-kernel,
linux-input, Duje Mihanović,
~postmarketos/upstreaming, phone-devel
Mark Brown, 2024-03-21T19:00:24+00:00:
> On Thu, Mar 21, 2024 at 07:16:43PM +0100, Karel Balej wrote:
> > Mark Brown, 2024-03-21T17:48:28+00:00:
>
> > > > They do according to the downstream driver which is my only reference.
> > > > In fact, there the driver defines the configs separately for each regmap
> > > > but with the same values.
>
> > > This is a downstream driver - are you sure it's got the best code
> > > quality?
>
> > No, that is why I have rewritten it and tried to improve on this. But
> > like I said, it is my only reference. Is there some other way to verify
> > this value (besides perhaps the datasheet)?
>
> The maximum register is whatever the maximum register we know about for
> the device is, the datasheet is generally a good reference there.
>
> > > I'm not seeing any references to registers with numbers as high as the
> > > maximum register that's there in your driver for example.
>
> > Indeed, I have performed the same check with the same findings. But that
> > doesn't necessarily mean that the maximum should be lower, no?
>
> > Do you have some specific modifications of my code in mind regarding
> > this?
>
> I would expect that if you have two separate register maps they would
> have separate configurations that describe the corresponding physical
> register maps, as far as I can tell this driver is just making up a
> maximum register number.
Alright, so I should just use a separate config for each regmap and set
the max_register value for each to whatever I can find is actually the
highest used value in the downstream code -- correct?
Thank you,
K. B.
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC
2024-03-21 19:14 ` Karel Balej
@ 2024-03-21 19:32 ` Mark Brown
0 siblings, 0 replies; 19+ messages in thread
From: Mark Brown @ 2024-03-21 19:32 UTC (permalink / raw)
To: Karel Balej
Cc: Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Dmitry Torokhov, Liam Girdwood, devicetree, linux-kernel,
linux-input, Duje Mihanović,
~postmarketos/upstreaming, phone-devel
[-- Attachment #1: Type: text/plain, Size: 644 bytes --]
On Thu, Mar 21, 2024 at 08:14:44PM +0100, Karel Balej wrote:
> Mark Brown, 2024-03-21T19:00:24+00:00:
> > I would expect that if you have two separate register maps they would
> > have separate configurations that describe the corresponding physical
> > register maps, as far as I can tell this driver is just making up a
> > maximum register number.
> Alright, so I should just use a separate config for each regmap and set
> the max_register value for each to whatever I can find is actually the
> highest used value in the downstream code -- correct?
That sounds plausible if you don't have any other information about the
register maps.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 19+ messages in thread
* [RFC PATCH v4 3/5] regulator: add regulators driver for Marvell 88PM886 PMIC
2024-03-11 15:51 [RFC PATCH v4 0/5] initial support for Marvell 88PM886 PMIC Karel Balej
2024-03-11 15:51 ` [RFC PATCH v4 1/5] dt-bindings: mfd: add entry " Karel Balej
2024-03-11 15:51 ` [RFC PATCH v4 2/5] mfd: add driver " Karel Balej
@ 2024-03-11 15:51 ` Karel Balej
2024-03-11 15:51 ` [RFC PATCH v4 4/5] input: add onkey " Karel Balej
2024-03-11 15:51 ` [RFC PATCH v4 5/5] MAINTAINERS: add myself " Karel Balej
4 siblings, 0 replies; 19+ messages in thread
From: Karel Balej @ 2024-03-11 15:51 UTC (permalink / raw)
To: Karel Balej, Lee Jones, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Dmitry Torokhov, Liam Girdwood, Mark Brown,
devicetree, linux-kernel, linux-input
Cc: Duje Mihanović, ~postmarketos/upstreaming, phone-devel
From: Karel Balej <balejk@matfyz.cz>
Support the LDO and buck regulators of the Marvell 88PM886 PMIC.
Signed-off-by: Karel Balej <balejk@matfyz.cz>
---
Please note that most of the regulators are not yet described: the
descriptions will be added to pm886_regulators in the same manner as the
already present ones before the series leaves the RFC state. In the
meantime, general comments on the driver will be appreciated.
Notes:
RFC v4:
- Initialize regulators regmap in the regulators driver.
- Register all regulators at once.
- Drop regulator IDs.
- Add missing '\n' to dev_err_probe message.
- Fix includes.
- Add ID table.
RFC v3:
- Do not have a variable for each regulator -- define them all in the
pm886_regulators array.
- Use new regulators regmap index name.
- Use dev_err_probe.
RFC v2:
- Drop of_compatible and related code.
- Drop unused include.
- Remove some abstraction: use only one regmap for all regulators and
only mention 88PM886 in Kconfig description.
- Reword commit message.
drivers/regulator/88pm886-regulator.c | 215 ++++++++++++++++++++++++++
drivers/regulator/Kconfig | 6 +
drivers/regulator/Makefile | 1 +
3 files changed, 222 insertions(+)
create mode 100644 drivers/regulator/88pm886-regulator.c
diff --git a/drivers/regulator/88pm886-regulator.c b/drivers/regulator/88pm886-regulator.c
new file mode 100644
index 000000000000..6a2ddb11a28a
--- /dev/null
+++ b/drivers/regulator/88pm886-regulator.c
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/linear_range.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+#include <linux/mfd/88pm886.h>
+
+#define PM886_PAGE_OFFSET_REGULATORS 1
+
+#define PM886_REG_LDO_EN1 0x09
+#define PM886_REG_LDO_EN2 0x0a
+
+#define PM886_REG_BUCK_EN 0x08
+
+#define PM886_REG_LDO1_VOUT 0x20
+#define PM886_REG_LDO2_VOUT 0x26
+#define PM886_REG_LDO3_VOUT 0x2c
+#define PM886_REG_LDO4_VOUT 0x32
+#define PM886_REG_LDO5_VOUT 0x38
+#define PM886_REG_LDO6_VOUT 0x3e
+#define PM886_REG_LDO7_VOUT 0x44
+#define PM886_REG_LDO8_VOUT 0x4a
+#define PM886_REG_LDO9_VOUT 0x50
+#define PM886_REG_LDO10_VOUT 0x56
+#define PM886_REG_LDO11_VOUT 0x5c
+#define PM886_REG_LDO12_VOUT 0x62
+#define PM886_REG_LDO13_VOUT 0x68
+#define PM886_REG_LDO14_VOUT 0x6e
+#define PM886_REG_LDO15_VOUT 0x74
+#define PM886_REG_LDO16_VOUT 0x7a
+
+#define PM886_REG_BUCK1_VOUT 0xa5
+#define PM886_REG_BUCK2_VOUT 0xb3
+#define PM886_REG_BUCK3_VOUT 0xc1
+#define PM886_REG_BUCK4_VOUT 0xcf
+#define PM886_REG_BUCK5_VOUT 0xdd
+
+#define PM886_LDO_VSEL_MASK 0x0f
+#define PM886_BUCK_VSEL_MASK 0x7f
+
+struct pm886_regulator {
+ struct regulator_desc desc;
+ int max_uA;
+};
+
+static int pm886_regulator_get_ilim(struct regulator_dev *rdev)
+{
+ struct pm886_regulator *data = rdev_get_drvdata(rdev);
+
+ if (!data) {
+ dev_err(&rdev->dev, "Failed to get regulator data\n");
+ return -EINVAL;
+ }
+ return data->max_uA;
+}
+
+static const struct regulator_ops pm886_ldo_ops = {
+ .list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_iterate,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .get_current_limit = pm886_regulator_get_ilim,
+};
+
+static const struct regulator_ops pm886_buck_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .get_current_limit = pm886_regulator_get_ilim,
+};
+
+static const unsigned int pm886_ldo_volt_table1[] = {
+ 1700000, 1800000, 1900000, 2500000, 2800000, 2900000, 3100000, 3300000,
+};
+
+static const unsigned int pm886_ldo_volt_table2[] = {
+ 1200000, 1250000, 1700000, 1800000, 1850000, 1900000, 2500000, 2600000,
+ 2700000, 2750000, 2800000, 2850000, 2900000, 3000000, 3100000, 3300000,
+};
+
+static const unsigned int pm886_ldo_volt_table3[] = {
+ 1700000, 1800000, 1900000, 2000000, 2100000, 2500000, 2700000, 2800000,
+};
+
+static const struct linear_range pm886_buck_volt_ranges1[] = {
+ REGULATOR_LINEAR_RANGE(600000, 0, 79, 12500),
+ REGULATOR_LINEAR_RANGE(1600000, 80, 84, 50000),
+};
+
+static const struct linear_range pm886_buck_volt_ranges2[] = {
+ REGULATOR_LINEAR_RANGE(600000, 0, 79, 12500),
+ REGULATOR_LINEAR_RANGE(1600000, 80, 114, 50000),
+};
+
+static struct pm886_regulator pm886_regulators[] = {
+ {
+ .desc = {
+ .name = "LDO2",
+ .regulators_node = "regulators",
+ .of_match = "ldo2",
+ .ops = &pm886_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .enable_reg = PM886_REG_LDO_EN1,
+ .enable_mask = BIT(1),
+ .volt_table = pm886_ldo_volt_table1,
+ .n_voltages = ARRAY_SIZE(pm886_ldo_volt_table1),
+ .vsel_reg = PM886_REG_LDO2_VOUT,
+ .vsel_mask = PM886_LDO_VSEL_MASK,
+ },
+ .max_uA = 100000,
+ },
+ {
+ .desc = {
+ .name = "LDO15",
+ .regulators_node = "regulators",
+ .of_match = "ldo15",
+ .ops = &pm886_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .enable_reg = PM886_REG_LDO_EN2,
+ .enable_mask = BIT(6),
+ .volt_table = pm886_ldo_volt_table2,
+ .n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2),
+ .vsel_reg = PM886_REG_LDO15_VOUT,
+ .vsel_mask = PM886_LDO_VSEL_MASK,
+ },
+ .max_uA = 200000,
+ },
+ {
+ .desc = {
+ .name = "buck2",
+ .regulators_node = "regulators",
+ .of_match = "buck2",
+ .ops = &pm886_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 115,
+ .linear_ranges = pm886_buck_volt_ranges2,
+ .n_linear_ranges = ARRAY_SIZE(pm886_buck_volt_ranges2),
+ .vsel_reg = PM886_REG_BUCK2_VOUT,
+ .vsel_mask = PM886_BUCK_VSEL_MASK,
+ .enable_reg = PM886_REG_BUCK_EN,
+ .enable_mask = BIT(1),
+ },
+ .max_uA = 1200000,
+ },
+};
+
+static int pm886_regulator_probe(struct platform_device *pdev)
+{
+ struct pm886_chip *chip = dev_get_drvdata(pdev->dev.parent);
+ struct regulator_config rcfg = { };
+ struct pm886_regulator *regulator;
+ struct device *dev = &pdev->dev;
+ struct regulator_desc *rdesc;
+ struct regulator_dev *rdev;
+ struct i2c_client *page;
+ struct regmap *regmap;
+
+ page = devm_i2c_new_dummy_device(dev, chip->client->adapter,
+ chip->client->addr + PM886_PAGE_OFFSET_REGULATORS);
+ if (IS_ERR(page))
+ return dev_err_probe(dev, PTR_ERR(page),
+ "Failed to initialize regulators client\n");
+
+ regmap = devm_regmap_init_i2c(page, &pm886_i2c_regmap);
+ if (IS_ERR(regmap))
+ return dev_err_probe(dev, PTR_ERR(regmap),
+ "Failed to initialize regulators regmap\n");
+ rcfg.regmap = regmap;
+
+ rcfg.dev = dev->parent;
+
+ for (int i = 0; i < ARRAY_SIZE(pm886_regulators); i++) {
+ regulator = &pm886_regulators[i];
+ rdesc = ®ulator->desc;
+ rcfg.driver_data = regulator;
+ rdev = devm_regulator_register(dev, rdesc, &rcfg);
+ if (IS_ERR(rdev))
+ return dev_err_probe(dev, PTR_ERR(rdev),
+ "Failed to register %s\n", rdesc->name);
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id pm886_regulator_id_table[] = {
+ { "88pm886-regulator", },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, pm886_regulator_id_table);
+
+static struct platform_driver pm886_regulator_driver = {
+ .driver = {
+ .name = "88pm886-regulator",
+ },
+ .probe = pm886_regulator_probe,
+ .id_table = pm886_regulator_id_table,
+};
+module_platform_driver(pm886_regulator_driver);
+
+MODULE_DESCRIPTION("Marvell 88PM886 PMIC regulator driver");
+MODULE_AUTHOR("Karel Balej <balejk@matfyz.cz>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 550145f82726..e8f504d4b9f6 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -91,6 +91,12 @@ config REGULATOR_88PM8607
help
This driver supports 88PM8607 voltage regulator chips.
+config REGULATOR_88PM886
+ tristate "Marvell 88PM886 voltage regulators"
+ depends on MFD_88PM886_PMIC
+ help
+ This driver implements support for Marvell 88PM886 voltage regulators.
+
config REGULATOR_ACT8865
tristate "Active-semi act8865 voltage regulator"
depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 46fb569e6be8..f30089b74b2e 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
obj-$(CONFIG_REGULATOR_88PG86X) += 88pg86x.o
obj-$(CONFIG_REGULATOR_88PM800) += 88pm800-regulator.o
obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
+obj-$(CONFIG_REGULATOR_88PM886) += 88pm886-regulator.o
obj-$(CONFIG_REGULATOR_CROS_EC) += cros-ec-regulator.o
obj-$(CONFIG_REGULATOR_CPCAP) += cpcap-regulator.o
obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
--
2.44.0
^ permalink raw reply related [flat|nested] 19+ messages in thread* [RFC PATCH v4 4/5] input: add onkey driver for Marvell 88PM886 PMIC
2024-03-11 15:51 [RFC PATCH v4 0/5] initial support for Marvell 88PM886 PMIC Karel Balej
` (2 preceding siblings ...)
2024-03-11 15:51 ` [RFC PATCH v4 3/5] regulator: add regulators " Karel Balej
@ 2024-03-11 15:51 ` Karel Balej
2024-03-11 15:51 ` [RFC PATCH v4 5/5] MAINTAINERS: add myself " Karel Balej
4 siblings, 0 replies; 19+ messages in thread
From: Karel Balej @ 2024-03-11 15:51 UTC (permalink / raw)
To: Karel Balej, Lee Jones, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Dmitry Torokhov, Liam Girdwood, Mark Brown,
devicetree, linux-kernel, linux-input
Cc: Duje Mihanović, ~postmarketos/upstreaming, phone-devel
From: Karel Balej <balejk@matfyz.cz>
Marvell 88PM886 PMIC provides onkey among other things. Add client
driver to handle it. The driver currently only provides a basic support
omitting additional functions found in the vendor version, such as long
onkey and GPIO integration.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Karel Balej <balejk@matfyz.cz>
---
Notes:
RFC v4:
- Reflect MFD driver changes:
- chip->regmaps[...] -> chip->regmap
- Address Dmitry's feedback:
- Add ID table.
- Add Ack.
RFC v3:
- Drop wakeup-source.
RFC v2:
- Address Dmitry's feedback:
- Sort includes alphabetically.
- Drop onkey->irq.
- ret -> err in irq_handler and no initialization.
- Break long lines and other formatting.
- Do not clobber platform_get_irq error.
- Do not set device parent manually.
- Use input_set_capability.
- Use the wakeup-source DT property.
- Drop of_match_table.
- Use more temporaries.
- Use dev_err_probe.
- Modify Kconfig description.
drivers/input/misc/88pm886-onkey.c | 99 ++++++++++++++++++++++++++++++
drivers/input/misc/Kconfig | 7 +++
drivers/input/misc/Makefile | 1 +
3 files changed, 107 insertions(+)
create mode 100644 drivers/input/misc/88pm886-onkey.c
diff --git a/drivers/input/misc/88pm886-onkey.c b/drivers/input/misc/88pm886-onkey.c
new file mode 100644
index 000000000000..b0bfbd57d826
--- /dev/null
+++ b/drivers/input/misc/88pm886-onkey.c
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/88pm886.h>
+
+struct pm886_onkey {
+ struct input_dev *idev;
+ struct pm886_chip *chip;
+};
+
+static irqreturn_t pm886_onkey_irq_handler(int irq, void *data)
+{
+ struct pm886_onkey *onkey = data;
+ struct regmap *regmap = onkey->chip->regmap;
+ struct input_dev *idev = onkey->idev;
+ struct device *parent = idev->dev.parent;
+ unsigned int val;
+ int err;
+
+ err = regmap_read(regmap, PM886_REG_STATUS1, &val);
+ if (err) {
+ dev_err(parent, "Failed to read status: %d\n", err);
+ return IRQ_NONE;
+ }
+ val &= PM886_ONKEY_STS1;
+
+ input_report_key(idev, KEY_POWER, val);
+ input_sync(idev);
+
+ return IRQ_HANDLED;
+}
+
+static int pm886_onkey_probe(struct platform_device *pdev)
+{
+ struct pm886_chip *chip = dev_get_drvdata(pdev->dev.parent);
+ struct device *dev = &pdev->dev;
+ struct pm886_onkey *onkey;
+ struct input_dev *idev;
+ int irq, err;
+
+ onkey = devm_kzalloc(dev, sizeof(*onkey), GFP_KERNEL);
+ if (!onkey)
+ return -ENOMEM;
+
+ onkey->chip = chip;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return dev_err_probe(dev, irq, "Failed to get IRQ\n");
+
+ idev = devm_input_allocate_device(dev);
+ if (!idev) {
+ dev_err(dev, "Failed to allocate input device\n");
+ return -ENOMEM;
+ }
+ onkey->idev = idev;
+
+ idev->name = "88pm886-onkey";
+ idev->phys = "88pm886-onkey/input0";
+ idev->id.bustype = BUS_I2C;
+
+ input_set_capability(idev, EV_KEY, KEY_POWER);
+
+ err = devm_request_threaded_irq(dev, irq, NULL, pm886_onkey_irq_handler,
+ IRQF_ONESHOT | IRQF_NO_SUSPEND, "onkey",
+ onkey);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to request IRQ\n");
+
+ err = input_register_device(idev);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to register input device\n");
+
+ return 0;
+}
+
+static const struct platform_device_id pm886_onkey_id_table[] = {
+ { "88pm886-onkey", },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, pm886_onkey_id_table);
+
+static struct platform_driver pm886_onkey_driver = {
+ .driver = {
+ .name = "88pm886-onkey",
+ },
+ .probe = pm886_onkey_probe,
+ .id_table = pm886_onkey_id_table,
+};
+module_platform_driver(pm886_onkey_driver);
+
+MODULE_DESCRIPTION("Marvell 88PM886 onkey driver");
+MODULE_AUTHOR("Karel Balej <balejk@matfyz.cz>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 6ba984d7f0b1..16a079d9f0f2 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -33,6 +33,13 @@ config INPUT_88PM80X_ONKEY
To compile this driver as a module, choose M here: the module
will be called 88pm80x_onkey.
+config INPUT_88PM886_ONKEY
+ tristate "Marvell 88PM886 onkey support"
+ depends on MFD_88PM886_PMIC
+ help
+ Support the onkey of Marvell 88PM886 PMIC as an input device
+ reporting power button status.
+
config INPUT_AB8500_PONKEY
tristate "AB8500 Pon (PowerOn) Key"
depends on AB8500_CORE
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 04296a4abe8e..054a6dc1ac27 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -7,6 +7,7 @@
obj-$(CONFIG_INPUT_88PM860X_ONKEY) += 88pm860x_onkey.o
obj-$(CONFIG_INPUT_88PM80X_ONKEY) += 88pm80x_onkey.o
+obj-$(CONFIG_INPUT_88PM886_ONKEY) += 88pm886-onkey.o
obj-$(CONFIG_INPUT_AB8500_PONKEY) += ab8500-ponkey.o
obj-$(CONFIG_INPUT_AD714X) += ad714x.o
obj-$(CONFIG_INPUT_AD714X_I2C) += ad714x-i2c.o
--
2.44.0
^ permalink raw reply related [flat|nested] 19+ messages in thread* [RFC PATCH v4 5/5] MAINTAINERS: add myself for Marvell 88PM886 PMIC
2024-03-11 15:51 [RFC PATCH v4 0/5] initial support for Marvell 88PM886 PMIC Karel Balej
` (3 preceding siblings ...)
2024-03-11 15:51 ` [RFC PATCH v4 4/5] input: add onkey " Karel Balej
@ 2024-03-11 15:51 ` Karel Balej
4 siblings, 0 replies; 19+ messages in thread
From: Karel Balej @ 2024-03-11 15:51 UTC (permalink / raw)
To: Karel Balej, Lee Jones, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Dmitry Torokhov, Liam Girdwood, Mark Brown,
devicetree, linux-kernel, linux-input
Cc: Duje Mihanović, ~postmarketos/upstreaming, phone-devel
From: Karel Balej <balejk@matfyz.cz>
Add an entry to MAINTAINERS for the Marvell 88PM886 PMIC MFD, onkey and
regulator drivers.
Signed-off-by: Karel Balej <balejk@matfyz.cz>
---
Notes:
RFC v3:
- Remove onkey bindings file.
RFC v2:
- Only mention 88PM886 in the commit message.
- Add regulator driver.
- Rename the entry.
MAINTAINERS | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 960512bec428..944f88c92df6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12949,6 +12949,15 @@ F: drivers/net/dsa/mv88e6xxx/
F: include/linux/dsa/mv88e6xxx.h
F: include/linux/platform_data/mv88e6xxx.h
+MARVELL 88PM886 PMIC DRIVER
+M: Karel Balej <balejk@matfyz.cz>
+S: Maintained
+F: Documentation/devicetree/bindings/mfd/marvell,88pm886-a1.yaml
+F: drivers/input/misc/88pm886-onkey.c
+F: drivers/mfd/88pm886.c
+F: drivers/regulators/88pm886-regulator.c
+F: include/linux/mfd/88pm886.h
+
MARVELL ARMADA 3700 PHY DRIVERS
M: Miquel Raynal <miquel.raynal@bootlin.com>
S: Maintained
--
2.44.0
^ permalink raw reply related [flat|nested] 19+ messages in thread