All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jan Beulich <jbeulich@suse.com>
To: "xen-devel@lists.xenproject.org" <xen-devel@lists.xenproject.org>
Cc: "Andrew Cooper" <andrew.cooper3@citrix.com>,
	"Wei Liu" <wl@xen.org>, "Roger Pau Monné" <roger.pau@citrix.com>
Subject: [PATCH 3/4] x86/PVH: improve Dom0 memory size calculation
Date: Mon, 30 Aug 2021 15:03:13 +0200	[thread overview]
Message-ID: <a1c71c0a-8bc7-3f6f-ef5c-a0ef854fab33@suse.com> (raw)
In-Reply-To: <aae19abb-e88b-8bf8-6f1d-502ac6645d6b@suse.com>

Assuming that the accounting for IOMMU page tables will also take care
of the P2M needs was wrong: dom0_paging_pages() can determine a far
higher value, high enough for the system to run out of memory while
setting up Dom0. Hence in the case of shared page tables the larger of
the two values needs to be used (without shared page tables the sum of
both continues to be applicable).

While there also account for two further aspects in the PV case: With
"iommu=dom0-passthrough" no IOMMU page tables would get allocated, so
none need accounting for. And if shadow mode is to be enabled, setting
aside a suitable amount for the P2M pool to get populated is also
necessary (i.e. similar to the non-shared-page-tables case of PVH).

Signed-off-by: Jan Beulich <jbeulich@suse.com>

--- a/xen/arch/x86/dom0_build.c
+++ b/xen/arch/x86/dom0_build.c
@@ -318,7 +318,7 @@ unsigned long __init dom0_compute_nr_pag
     struct domain *d, struct elf_dom_parms *parms, unsigned long initrd_len)
 {
     nodeid_t node;
-    unsigned long avail = 0, nr_pages, min_pages, max_pages;
+    unsigned long avail = 0, nr_pages, min_pages, max_pages, iommu_pages = 0;
     bool need_paging;
 
     /* The ordering of operands is to work around a clang5 issue. */
@@ -337,18 +337,23 @@ unsigned long __init dom0_compute_nr_pag
         avail -= d->max_vcpus - 1;
 
     /* Reserve memory for iommu_dom0_init() (rough estimate). */
-    if ( is_iommu_enabled(d) )
+    if ( is_iommu_enabled(d) && !iommu_hwdom_passthrough )
     {
         unsigned int s;
 
         for ( s = 9; s < BITS_PER_LONG; s += 9 )
-            avail -= max_pdx >> s;
+            iommu_pages += max_pdx >> s;
+
+        avail -= iommu_pages;
     }
 
-    need_paging = is_hvm_domain(d) &&
-        (!iommu_use_hap_pt(d) || !paging_mode_hap(d));
+    need_paging = is_hvm_domain(d)
+                  ? !iommu_use_hap_pt(d) || !paging_mode_hap(d)
+                  : opt_dom0_shadow;
     for ( ; ; need_paging = false )
     {
+        unsigned long paging_pages;
+
         nr_pages = get_memsize(&dom0_size, avail);
         min_pages = get_memsize(&dom0_min_size, avail);
         max_pages = get_memsize(&dom0_max_size, avail);
@@ -377,11 +382,20 @@ unsigned long __init dom0_compute_nr_pag
         nr_pages = min(nr_pages, max_pages);
         nr_pages = min(nr_pages, avail);
 
-        if ( !need_paging )
-            break;
+        paging_pages = paging_mode_enabled(d) || need_paging
+                       ? dom0_paging_pages(d, nr_pages) : 0;
 
         /* Reserve memory for shadow or HAP. */
-        avail -= dom0_paging_pages(d, nr_pages);
+        if ( !need_paging )
+        {
+            if ( paging_pages <= iommu_pages )
+                break;
+
+            avail -= paging_pages - iommu_pages;
+        }
+        else
+            avail -= paging_pages;
+        iommu_pages = paging_pages;
     }
 
     if ( is_pv_domain(d) &&



  parent reply	other threads:[~2021-08-30 13:03 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-30 13:01 [PATCH 0/4] x86/PVH: Dom0 building adjustments Jan Beulich
2021-08-30 13:02 ` [PATCH 1/4] x86/PVH: de-duplicate mappings for first Mb of Dom0 memory Jan Beulich
2021-08-31 13:02   ` Andrew Cooper
2021-08-31 13:14     ` Jan Beulich
2021-08-31 13:19       ` Jan Beulich
2021-08-31 13:27         ` Andrew Cooper
2021-08-31 13:36           ` Jan Beulich
2021-09-01 11:49             ` Andrew Cooper
2021-09-01  8:41       ` Roger Pau Monné
2021-08-30 13:02 ` [PATCH 2/4] x86/P2M: relax guarding of MMIO entries Jan Beulich
2021-08-31 13:16   ` Jan Beulich
2021-08-31 13:16   ` Andrew Cooper
2021-08-31 13:26     ` Jan Beulich
2021-08-31 15:25       ` Andrew Cooper
2021-08-31 15:38         ` Jan Beulich
2021-09-01  8:08           ` Jan Beulich
2021-09-01  8:50           ` Roger Pau Monné
2021-09-01  9:53             ` Jan Beulich
2021-09-01 13:48               ` Roger Pau Monné
2021-09-01 14:05                 ` Jan Beulich
2021-09-01 12:47           ` Andrew Cooper
2021-09-01 13:08             ` Jan Beulich
2021-09-06 19:53               ` Andrew Cooper
2021-09-07  6:27                 ` Jan Beulich
2021-08-30 13:03 ` Jan Beulich [this message]
2021-08-31 14:07   ` [PATCH 3/4] x86/PVH: improve Dom0 memory size calculation Andrew Cooper
2021-08-31 15:30     ` Jan Beulich
2021-08-30 13:03 ` [PATCH 4/4] x86/PV: properly set shadow allocation for Dom0 Jan Beulich
2021-08-31 13:47   ` Andrew Cooper
2021-08-31 14:25     ` Jan Beulich
2021-08-31 21:08   ` Tim Deegan
2021-08-31  8:53 ` [PATCH 0/4] x86/PVH: Dom0 building adjustments Jan Beulich
2021-09-01 13:56   ` Roger Pau Monné
2021-09-01 14:19     ` Jan Beulich
2021-09-01 14:25       ` Jan Beulich
2021-09-01 16:13       ` Roger Pau Monné
2021-09-02  6:30         ` Jan Beulich
2021-09-01 15:06 ` Jan Beulich
2021-09-01 15:24   ` Juergen Gross
2021-09-01 15:51     ` Jan Beulich

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a1c71c0a-8bc7-3f6f-ef5c-a0ef854fab33@suse.com \
    --to=jbeulich@suse.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=roger.pau@citrix.com \
    --cc=wl@xen.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.