From: Alistair Francis <alistair.francis@wdc.com> To: qemu-devel@nongnu.org, qemu-riscv@nongnu.org Cc: alistair.francis@wdc.com, bmeng.cn@gmail.com, palmer@dabbelt.com, alistair23@gmail.com Subject: [PATCH v3 08/15] hw/riscv: sifive_u: Remove compile time XLEN checks Date: Mon, 14 Dec 2020 12:34:18 -0800 [thread overview] Message-ID: <b86408181948129347f6bef37b734add89a2f480.1607967113.git.alistair.francis@wdc.com> (raw) In-Reply-To: <cover.1607967113.git.alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/sifive_u.c | 55 ++++++++++++++++++++++++--------------------- 1 file changed, 30 insertions(+), 25 deletions(-) diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c index d550befadb..7216329237 100644 --- a/hw/riscv/sifive_u.c +++ b/hw/riscv/sifive_u.c @@ -60,12 +60,6 @@ #include <libfdt.h> -#if defined(TARGET_RISCV32) -# define BIOS_FILENAME "opensbi-riscv32-generic-fw_dynamic.bin" -#else -# define BIOS_FILENAME "opensbi-riscv64-generic-fw_dynamic.bin" -#endif - static const struct MemmapEntry { hwaddr base; hwaddr size; @@ -93,7 +87,7 @@ static const struct MemmapEntry { #define GEM_REVISION 0x10070109 static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap, - uint64_t mem_size, const char *cmdline) + uint64_t mem_size, const char *cmdline, bool is_32_bit) { MachineState *ms = MACHINE(qdev_get_machine()); void *fdt; @@ -178,11 +172,11 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap, qemu_fdt_add_subnode(fdt, nodename); /* cpu 0 is the management hart that does not have mmu */ if (cpu != 0) { -#if defined(TARGET_RISCV32) - qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv32"); -#else - qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv48"); -#endif + if (is_32_bit) { + qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv32"); + } else { + qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv48"); + } isa = riscv_isa_string(&s->soc.u_cpus.harts[cpu - 1]); } else { isa = riscv_isa_string(&s->soc.e_cpus.harts[0]); @@ -458,7 +452,8 @@ static void sifive_u_machine_init(MachineState *machine) qemu_allocate_irq(sifive_u_machine_reset, NULL, 0)); /* create device tree */ - create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline); + create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline, + riscv_is_32_bit(machine)); if (s->start_in_flash) { /* @@ -487,8 +482,15 @@ static void sifive_u_machine_init(MachineState *machine) break; } - firmware_end_addr = riscv_find_and_load_firmware(machine, BIOS_FILENAME, - start_addr, NULL); + if (riscv_is_32_bit(machine)) { + firmware_end_addr = riscv_find_and_load_firmware(machine, + "opensbi-riscv32-generic-fw_dynamic.bin", + start_addr, NULL); + } else { + firmware_end_addr = riscv_find_and_load_firmware(machine, + "opensbi-riscv64-generic-fw_dynamic.bin", + start_addr, NULL); + } if (machine->kernel_filename) { kernel_start_addr = riscv_calc_kernel_start_addr(machine, @@ -518,9 +520,9 @@ static void sifive_u_machine_init(MachineState *machine) /* Compute the fdt load address in dram */ fdt_load_addr = riscv_load_fdt(memmap[SIFIVE_U_DEV_DRAM].base, machine->ram_size, s->fdt); - #if defined(TARGET_RISCV64) - start_addr_hi32 = start_addr >> 32; - #endif + if (!riscv_is_32_bit(machine)) { + start_addr_hi32 = (uint64_t)start_addr >> 32; + } /* reset vector */ uint32_t reset_vec[11] = { @@ -528,13 +530,8 @@ static void sifive_u_machine_init(MachineState *machine) 0x00000297, /* 1: auipc t0, %pcrel_hi(fw_dyn) */ 0x02828613, /* addi a2, t0, %pcrel_lo(1b) */ 0xf1402573, /* csrr a0, mhartid */ -#if defined(TARGET_RISCV32) - 0x0202a583, /* lw a1, 32(t0) */ - 0x0182a283, /* lw t0, 24(t0) */ -#elif defined(TARGET_RISCV64) - 0x0202b583, /* ld a1, 32(t0) */ - 0x0182b283, /* ld t0, 24(t0) */ -#endif + 0, + 0, 0x00028067, /* jr t0 */ start_addr, /* start: .dword */ start_addr_hi32, @@ -542,6 +539,14 @@ static void sifive_u_machine_init(MachineState *machine) 0x00000000, /* fw_dyn: */ }; + if (riscv_is_32_bit(machine)) { + reset_vec[4] = 0x0202a583; /* lw a1, 32(t0) */ + reset_vec[5] = 0x0182a283; /* lw t0, 24(t0) */ + } else { + reset_vec[4] = 0x0202b583; /* ld a1, 32(t0) */ + reset_vec[5] = 0x0182b283; /* ld t0, 24(t0) */ + } + /* copy in the reset vector in little_endian byte order */ for (i = 0; i < ARRAY_SIZE(reset_vec); i++) { -- 2.29.2
WARNING: multiple messages have this Message-ID (diff)
From: Alistair Francis <alistair.francis@wdc.com> To: qemu-devel@nongnu.org, qemu-riscv@nongnu.org Cc: bmeng.cn@gmail.com, palmer@dabbelt.com, alistair.francis@wdc.com, alistair23@gmail.com Subject: [PATCH v3 08/15] hw/riscv: sifive_u: Remove compile time XLEN checks Date: Mon, 14 Dec 2020 12:34:18 -0800 [thread overview] Message-ID: <b86408181948129347f6bef37b734add89a2f480.1607967113.git.alistair.francis@wdc.com> (raw) In-Reply-To: <cover.1607967113.git.alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- hw/riscv/sifive_u.c | 55 ++++++++++++++++++++++++--------------------- 1 file changed, 30 insertions(+), 25 deletions(-) diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c index d550befadb..7216329237 100644 --- a/hw/riscv/sifive_u.c +++ b/hw/riscv/sifive_u.c @@ -60,12 +60,6 @@ #include <libfdt.h> -#if defined(TARGET_RISCV32) -# define BIOS_FILENAME "opensbi-riscv32-generic-fw_dynamic.bin" -#else -# define BIOS_FILENAME "opensbi-riscv64-generic-fw_dynamic.bin" -#endif - static const struct MemmapEntry { hwaddr base; hwaddr size; @@ -93,7 +87,7 @@ static const struct MemmapEntry { #define GEM_REVISION 0x10070109 static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap, - uint64_t mem_size, const char *cmdline) + uint64_t mem_size, const char *cmdline, bool is_32_bit) { MachineState *ms = MACHINE(qdev_get_machine()); void *fdt; @@ -178,11 +172,11 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap, qemu_fdt_add_subnode(fdt, nodename); /* cpu 0 is the management hart that does not have mmu */ if (cpu != 0) { -#if defined(TARGET_RISCV32) - qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv32"); -#else - qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv48"); -#endif + if (is_32_bit) { + qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv32"); + } else { + qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv48"); + } isa = riscv_isa_string(&s->soc.u_cpus.harts[cpu - 1]); } else { isa = riscv_isa_string(&s->soc.e_cpus.harts[0]); @@ -458,7 +452,8 @@ static void sifive_u_machine_init(MachineState *machine) qemu_allocate_irq(sifive_u_machine_reset, NULL, 0)); /* create device tree */ - create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline); + create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline, + riscv_is_32_bit(machine)); if (s->start_in_flash) { /* @@ -487,8 +482,15 @@ static void sifive_u_machine_init(MachineState *machine) break; } - firmware_end_addr = riscv_find_and_load_firmware(machine, BIOS_FILENAME, - start_addr, NULL); + if (riscv_is_32_bit(machine)) { + firmware_end_addr = riscv_find_and_load_firmware(machine, + "opensbi-riscv32-generic-fw_dynamic.bin", + start_addr, NULL); + } else { + firmware_end_addr = riscv_find_and_load_firmware(machine, + "opensbi-riscv64-generic-fw_dynamic.bin", + start_addr, NULL); + } if (machine->kernel_filename) { kernel_start_addr = riscv_calc_kernel_start_addr(machine, @@ -518,9 +520,9 @@ static void sifive_u_machine_init(MachineState *machine) /* Compute the fdt load address in dram */ fdt_load_addr = riscv_load_fdt(memmap[SIFIVE_U_DEV_DRAM].base, machine->ram_size, s->fdt); - #if defined(TARGET_RISCV64) - start_addr_hi32 = start_addr >> 32; - #endif + if (!riscv_is_32_bit(machine)) { + start_addr_hi32 = (uint64_t)start_addr >> 32; + } /* reset vector */ uint32_t reset_vec[11] = { @@ -528,13 +530,8 @@ static void sifive_u_machine_init(MachineState *machine) 0x00000297, /* 1: auipc t0, %pcrel_hi(fw_dyn) */ 0x02828613, /* addi a2, t0, %pcrel_lo(1b) */ 0xf1402573, /* csrr a0, mhartid */ -#if defined(TARGET_RISCV32) - 0x0202a583, /* lw a1, 32(t0) */ - 0x0182a283, /* lw t0, 24(t0) */ -#elif defined(TARGET_RISCV64) - 0x0202b583, /* ld a1, 32(t0) */ - 0x0182b283, /* ld t0, 24(t0) */ -#endif + 0, + 0, 0x00028067, /* jr t0 */ start_addr, /* start: .dword */ start_addr_hi32, @@ -542,6 +539,14 @@ static void sifive_u_machine_init(MachineState *machine) 0x00000000, /* fw_dyn: */ }; + if (riscv_is_32_bit(machine)) { + reset_vec[4] = 0x0202a583; /* lw a1, 32(t0) */ + reset_vec[5] = 0x0182a283; /* lw t0, 24(t0) */ + } else { + reset_vec[4] = 0x0202b583; /* ld a1, 32(t0) */ + reset_vec[5] = 0x0182b283; /* ld t0, 24(t0) */ + } + /* copy in the reset vector in little_endian byte order */ for (i = 0; i < ARRAY_SIZE(reset_vec); i++) { -- 2.29.2
next prev parent reply other threads:[~2020-12-14 20:37 UTC|newest] Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-12-14 20:33 [PATCH v3 00/15] RISC-V: Start to remove xlen preprocess Alistair Francis 2020-12-14 20:33 ` Alistair Francis 2020-12-14 20:33 ` [PATCH v3 01/15] hw/riscv: Expand the is 32-bit check to support more CPUs Alistair Francis 2020-12-14 20:33 ` Alistair Francis 2020-12-15 9:26 ` Bin Meng 2020-12-15 9:26 ` Bin Meng 2020-12-15 16:44 ` Alistair Francis 2020-12-15 16:44 ` Alistair Francis 2020-12-15 21:25 ` Richard Henderson 2020-12-15 21:25 ` Richard Henderson 2020-12-16 18:16 ` Alistair Francis 2020-12-16 18:16 ` Alistair Francis 2020-12-14 20:34 ` [PATCH v3 02/15] target/riscv: Add a TYPE_RISCV_CPU_BASE CPU Alistair Francis 2020-12-14 20:34 ` Alistair Francis 2020-12-14 20:34 ` [PATCH v3 03/15] riscv: spike: Remove target macro conditionals Alistair Francis 2020-12-14 20:34 ` Alistair Francis 2020-12-14 20:34 ` [PATCH v3 04/15] riscv: virt: " Alistair Francis 2020-12-14 20:34 ` Alistair Francis 2020-12-14 20:34 ` [PATCH v3 05/15] hw/riscv: boot: Remove compile time XLEN checks Alistair Francis 2020-12-14 20:34 ` Alistair Francis 2020-12-14 20:34 ` [PATCH v3 06/15] hw/riscv: virt: " Alistair Francis 2020-12-14 20:34 ` Alistair Francis 2020-12-14 20:34 ` [PATCH v3 07/15] hw/riscv: spike: " Alistair Francis 2020-12-14 20:34 ` Alistair Francis 2020-12-14 20:34 ` Alistair Francis [this message] 2020-12-14 20:34 ` [PATCH v3 08/15] hw/riscv: sifive_u: " Alistair Francis 2020-12-14 20:34 ` [PATCH v3 09/15] target/riscv: fpu_helper: Match function defs in HELPER macros Alistair Francis 2020-12-14 20:34 ` Alistair Francis 2020-12-15 9:38 ` Bin Meng 2020-12-15 9:38 ` Bin Meng 2020-12-15 15:13 ` Richard Henderson 2020-12-15 15:13 ` Richard Henderson 2020-12-15 17:15 ` Alistair Francis 2020-12-15 17:15 ` Alistair Francis 2020-12-14 20:34 ` [PATCH v3 10/15] target/riscv: Add a riscv_cpu_is_32bit() helper function Alistair Francis 2020-12-14 20:34 ` Alistair Francis 2020-12-14 20:34 ` [PATCH v3 11/15] target/riscv: Specify the XLEN for CPUs Alistair Francis 2020-12-14 20:34 ` Alistair Francis 2020-12-14 20:34 ` [PATCH v3 12/15] target/riscv: cpu: Remove compile time XLEN checks Alistair Francis 2020-12-14 20:34 ` Alistair Francis 2020-12-14 20:34 ` [PATCH v3 13/15] target/riscv: cpu_helper: " Alistair Francis 2020-12-14 20:34 ` Alistair Francis 2020-12-14 20:34 ` [PATCH v3 14/15] target/riscv: csr: " Alistair Francis 2020-12-14 20:34 ` Alistair Francis 2020-12-15 13:27 ` Bin Meng 2020-12-15 13:27 ` Bin Meng 2020-12-14 20:34 ` [PATCH v3 15/15] target/riscv: cpu: Set XLEN independently from target Alistair Francis 2020-12-14 20:34 ` Alistair Francis
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=b86408181948129347f6bef37b734add89a2f480.1607967113.git.alistair.francis@wdc.com \ --to=alistair.francis@wdc.com \ --cc=alistair23@gmail.com \ --cc=bmeng.cn@gmail.com \ --cc=palmer@dabbelt.com \ --cc=qemu-devel@nongnu.org \ --cc=qemu-riscv@nongnu.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.