Re: [PATCH 17/22] arm64: dts: qcom: sm8150: Add apss_shared and apps_rsc nodes

[Stephen Boyd <sboyd@kernel.org>]

Quoting Vinod Koul (2019-08-14 05:50:07)
> Add apss_shared and apps_rsc node including the rpmhcc child node
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---

Can't this be squashed with the original dtsi file?

>  arch/arm64/boot/dts/qcom/sm8150.dtsi | 30 ++++++++++++++++++++++++++++
>  1 file changed, 30 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> index 5c6b103b042b..5258b79676f6 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> @@ -4,6 +4,7 @@
>  
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/clock/qcom,gcc-sm8150.h>
> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>

But not the rpmh clk bindings?

> @@ -272,6 +279,29 @@
>                         };
>                 };
>  
> +               apps_rsc: rsc@18200000 {
> +                       label = "apps_rsc";
> +                       compatible = "qcom,rpmh-rsc";
> +                       reg = <0x18200000 0x10000>,
> +                             <0x18210000 0x10000>,
> +                             <0x18220000 0x10000>;
> +                       reg-names = "drv-0", "drv-1", "drv-2";
> +                       interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> +                       qcom,tcs-offset = <0xd00>;
> +                       qcom,drv-id = <2>;
> +                       qcom,tcs-config = <ACTIVE_TCS  2>,
> +                                         <SLEEP_TCS   1>,
> +                                         <WAKE_TCS    1>,
> +                                         <CONTROL_TCS 0>;
> +
> +                       rpmhcc: clock-controller {
> +                               compatible = "qcom,sm8150-rpmh-clk";
> +                               #clock-cells = <1>;

Should take some sort of clocks property to get the board clock for XO?

> +                       };
> +               };
> +