From: Lee Jones <lee.jones@linaro.org>
To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: angus.clark@st.com, kernel@stlinux.com, lee.jones@linaro.org,
linux-mtd@lists.infradead.org, pekon@ti.com,
computersforpeace@gmail.com, dwmw2@infradead.org
Subject: [RFC 09/47] mtd: nand: stm_nand_bch: introduce and initialise some important data structures
Date: Tue, 25 Mar 2014 08:19:26 +0000 [thread overview]
Message-ID: <1395735604-26706-10-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1395735604-26706-1-git-send-email-lee.jones@linaro.org>
Provide some more in-depth structures which will be used heavily within
the driver. We also add a convenience function, used to set the default
values.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mtd/nand/stm_nand_bch.c | 76 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 76 insertions(+)
diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
index cc0159e..7333ad6 100644
--- a/drivers/mtd/nand/stm_nand_bch.c
+++ b/drivers/mtd/nand/stm_nand_bch.c
@@ -21,10 +21,30 @@
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/completion.h>
+#include <linux/mtd/nand.h>
#include <linux/mtd/stm_nand.h>
#include "stm_nand_regs.h"
+/* Bad Block Table (BBT) */
+struct nandi_bbt_info {
+ uint32_t bbt_size; /* Size of bad-block table */
+ uint32_t bbt_vers[2]; /* Version (Primary/Mirror) */
+ uint32_t bbt_block[2]; /* Block No. (Primary/Mirror) */
+ uint8_t *bbt; /* Table data */
+};
+
+/* Collection of MTD/NAND device information */
+struct nandi_info {
+ struct mtd_info mtd; /* MTD info */
+ struct nand_chip chip; /* NAND chip info */
+
+ struct nand_ecclayout ecclayout; /* MTD ECC layout */
+ struct nandi_bbt_info bbt_info; /* Bad Block Table */
+ int nr_parts; /* Number of MTD partitions */
+ struct mtd_partition *parts; /* MTD partitions */
+};
+
/* NANDi Controller (Hamming/BCH) */
struct nandi_controller {
void __iomem *base; /* Controller base*/
@@ -60,6 +80,8 @@ struct nandi_controller {
int cached_page; /* page number of page in */
/* 'page_buf' */
+
+ struct nandi_info info; /* NAND device info */
};
/*
@@ -107,6 +129,46 @@ static void nandi_disable_interrupts(struct nandi_controller *nandi,
writel(val, nandi->base + NANDBCH_INT_EN);
}
+static void nandi_set_mtd_defaults(struct nandi_controller *nandi,
+ struct mtd_info *mtd, struct nand_chip *chip)
+{
+ struct nandi_info *info = &nandi->info;
+ int i;
+
+ /* ecclayout */
+ info->ecclayout.eccbytes = mtd->oobsize;
+ for (i = 0; i < 64; i++)
+ info->ecclayout.eccpos[i] = i;
+ info->ecclayout.oobfree[0].offset = 0;
+ info->ecclayout.oobfree[0].length = 0;
+ info->ecclayout.oobavail = 0;
+
+ /* nand_chip */
+ chip->controller = &chip->hwcontrol;
+ spin_lock_init(&chip->controller->lock);
+ init_waitqueue_head(&chip->controller->wq);
+ chip->state = FL_READY;
+ chip->priv = nandi;
+ chip->ecc.layout = &info->ecclayout;
+
+ /* mtd_info */
+ mtd->owner = THIS_MODULE;
+ mtd->type = MTD_NANDFLASH;
+ mtd->flags = MTD_CAP_NANDFLASH;
+ mtd->ecclayout = &info->ecclayout;
+ mtd->oobavail = 0;
+ mtd->subpage_sft = 0;
+
+ mtd->_point = NULL;
+ mtd->_unpoint = NULL;
+ mtd->_lock = NULL;
+ mtd->_unlock = NULL;
+
+ mtd->_sync = nand_sync;
+ mtd->_suspend = nand_suspend;
+ mtd->_resume = nand_resume;
+}
+
static void nandi_clk_enable(struct nandi_controller *nandi)
{
if (nandi->emi_clk)
@@ -271,7 +333,11 @@ static int stm_nand_bch_probe(struct platform_device *pdev)
{
struct stm_plat_nand_bch_data *pdata = pdev->dev.platform_data;
struct stm_nand_bank_data *bank;
+ struct nandi_bbt_info *bbt_info;
struct nandi_controller *nandi;
+ struct nandi_info *info;
+ struct nand_chip *chip;
+ struct mtd_info *mtd;
if (!pdata) {
dev_err(&pdev->dev, "no platform data found\n");
@@ -291,6 +357,16 @@ static int stm_nand_bch_probe(struct platform_device *pdev)
if (bank)
nandi_init_controller(nandi, bank->csn);
+ info = &nandi->info;
+ chip = &info->chip;
+ bbt_info = &info->bbt_info;
+ mtd = &info->mtd;
+ mtd->priv = chip;
+ mtd->name = dev_name(&pdev->dev);
+ mtd->dev.parent = &pdev->dev;
+
+ nandi_set_mtd_defaults(nandi, mtd, chip);
+
return 0;
}
--
1.8.3.2
next prev parent reply other threads:[~2014-03-25 8:20 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-25 8:19 [RFC 00/47] mtd: nand: Add new driver supporting ST's BCH h/w Lee Jones
2014-03-25 8:19 ` [RFC 01/47] mtd: nand: export useful functions from core driver Lee Jones
2014-03-25 12:57 ` Ezequiel Garcia
2014-03-25 14:58 ` Lee Jones
2014-03-25 8:19 ` [RFC 02/47] mtd: nand: add ONFI NAND Timing Mode Specifications Lee Jones
2014-03-25 17:01 ` Jason Gunthorpe
2014-03-25 8:19 ` [RFC 03/47] mtd: nand: add shared register defines for ST's NAND Controller drivers Lee Jones
2014-03-25 8:19 ` [RFC 04/47] mtd: nand: adding ST's BCH NAND Controller driver Lee Jones
2014-03-25 8:19 ` [RFC 05/47] mtd: nand: stm_nand_bch: IRQ support for " Lee Jones
2014-03-26 7:10 ` Gupta, Pekon
2014-03-25 8:19 ` [RFC 06/47] mtd: nand: stm_nand_bch: change between BCH and Hamming modes Lee Jones
2014-03-25 8:19 ` [RFC 07/47] mtd: nand: stm_nand_bch: initialise the BCH Controller Lee Jones
2014-03-26 10:25 ` Gupta, Pekon
2014-04-30 10:22 ` Lee Jones
2014-04-30 10:59 ` Gupta, Pekon
2014-04-30 12:29 ` Lee Jones
2014-03-25 8:19 ` [RFC 08/47] mtd: nand: stm_nand_bch: supply clock support Lee Jones
2014-03-26 7:15 ` Gupta, Pekon
2014-03-25 8:19 ` Lee Jones [this message]
2014-03-25 8:19 ` [RFC 10/47] mtd: nand: stm_nand_bch: initialise the Hamming Controller Lee Jones
2014-03-25 8:19 ` [RFC 11/47] mtd: nand: stm_nand_bch: add Power Management Lee Jones
2014-03-25 8:19 ` [RFC 12/47] mtd: nand: stm_nand_bch: scan for NAND devices Lee Jones
2014-03-25 8:19 ` [RFC 13/47] mtd: nand: stm_nand_bch: provide Device Tree support Lee Jones
2014-03-26 9:18 ` Gupta, Pekon
2014-04-30 12:54 ` Lee Jones
2014-05-05 6:55 ` Gupta, Pekon
2014-05-09 10:03 ` Lee Jones
2014-05-09 10:32 ` Gupta, Pekon
2014-05-09 10:38 ` Lee Jones
2014-05-19 14:02 ` Lee Jones
2014-03-25 8:19 ` [RFC 14/47] mtd: nand: stm_nand_bch: configure BCH and FLEX by ONFI timing mode Lee Jones
2014-03-25 8:19 ` [RFC 15/47] mtd: nand: stm_nand_bch: add compatible page size check Lee Jones
2014-03-25 8:19 ` [RFC 16/47] mtd: nand: stm_nand_bch: derive some working variables for latter use Lee Jones
2014-03-25 8:19 ` [RFC 17/47] mtd: nand: stm_nand_bch: automatically set EEC mode if requested Lee Jones
2014-03-25 8:19 ` [RFC 18/47] mtd: nand: stm_nand_bch: ensure configuration is compatible with this driver Lee Jones
2014-03-25 8:19 ` [RFC 19/47] mtd: nand: stm_nand_bch: configure BCH read/write/erase programs Lee Jones
2014-03-25 8:19 ` [RFC 20/47] mtd: nand: stm_nand_bch: initialise working buffers Lee Jones
2014-03-25 8:19 ` [RFC 21/47] mtd: nand: stm_nand_bch: provide shared BCH operations Lee Jones
2014-03-25 8:19 ` [RFC 22/47] mtd: nand: stm_nand_bch: check erased page for zeros Lee Jones
2014-03-25 8:19 ` [RFC 23/47] mtd: nand: stm_nand_bch: read and write page (BCH) Lee Jones
2014-03-26 10:17 ` Gupta, Pekon
2014-04-30 11:19 ` Lee Jones
2014-03-25 8:19 ` [RFC 24/47] mtd: nand: stm_nand_bch: find IBBT signature Lee Jones
2014-03-25 8:19 ` [RFC 25/47] mtd: nand: stm_nand_bch: bad block marking helpers Lee Jones
2014-03-25 8:19 ` [RFC 26/47] mtd: nand: stm_nand_bch: populate IBBT BCH Header Lee Jones
2014-03-25 8:19 ` [RFC 27/47] mtd: nand: stm_nand_bch: write IBBT to Flash Lee Jones
2014-03-25 8:19 ` [RFC 28/47] mtd: nand: stm_nand_bch: update flash-resident BBT(s) Lee Jones
2014-03-25 8:19 ` [RFC 29/47] mtd: nand: stm_nand_bch: add Hamming-FLEX operations Lee Jones
2014-03-25 8:19 ` [RFC 30/47] mtd: nand: stm_nand_bch: read and write raw (FLEX) Lee Jones
2014-03-25 8:19 ` [RFC 31/47] mtd: nand: stm_nand_bch: scan block for BBM(s) according to specified BBT options Lee Jones
2014-03-25 8:19 ` [RFC 32/47] mtd: nand: stm_nand_bch: scan for BBMs and build memory-resident BBT Lee Jones
2014-03-25 8:19 ` [RFC 33/47] mtd: nand: stm_nand_bch: search for and load flash-resident BBT Lee Jones
2014-03-25 8:19 ` [RFC 34/47] mtd: nand: stm_nand_bch: " Lee Jones
2014-03-25 8:19 ` [RFC 35/47] mtd: nand: stm_nand_bch: dump bad blocks Lee Jones
2014-03-25 12:53 ` Ezequiel Garcia
2014-03-25 8:19 ` [RFC 36/47] mtd: nand: stm_nand_bch: parse partitions and register an MTD device Lee Jones
2014-03-25 8:19 ` [RFC 37/47] mtd: nand: stm_nand_bch: fetch the bit-flips threshold Lee Jones
2014-03-25 8:19 ` [RFC 38/47] mtd: nand: stm_nand_bch: check WP (FLEX) Lee Jones
2014-03-25 8:19 ` [RFC 39/47] mtd: nand: stm_nand_bch: read and write ops (FLEX) Lee Jones
2014-03-25 8:19 ` [RFC 40/47] mtd: nand: stm_nand_bch: MTD erase (BCH) Lee Jones
2014-03-25 8:19 ` [RFC 41/47] mtd: nand: stm_nand_bch: MTD mark and check for bad blocks (BCH) Lee Jones
2014-03-25 8:19 ` [RFC 42/47] mtd: nand: stm_nand_bch: add read and write OOB (BCH) Lee Jones
2014-03-25 8:20 ` [RFC 43/47] mtd: nand: stm_nand_bch: read and write functions (BCH) Lee Jones
2014-03-26 10:31 ` Gupta, Pekon
2014-04-30 9:19 ` Lee Jones
2014-03-25 8:20 ` [RFC 44/47] mtd: nand: stm_nand_bch: MTD read and write (BCH) Lee Jones
2014-03-25 8:20 ` [RFC 45/47] mtd: nand: stm_nand_bch: read and write buffers (FLEX) Lee Jones
2014-03-25 8:20 ` [RFC 46/47] mtd: nand: mtd_nand_bch: add remaining FLEX functions Lee Jones
2014-03-25 8:20 ` [RFC 47/47] mtd: nand: stm_nand_bch: catch unsupported calls Lee Jones
2014-03-25 12:50 ` [RFC 00/47] mtd: nand: Add new driver supporting ST's BCH h/w Ezequiel Garcia
2014-03-25 13:11 ` Lee Jones
2014-03-25 22:00 ` Ezequiel Garcia
2014-03-26 7:28 ` Brian Norris
2014-03-27 10:28 ` Lee Jones
2014-04-01 11:29 ` Lee Jones
2014-04-10 20:00 ` Brian Norris
2014-04-30 9:57 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1395735604-26706-10-git-send-email-lee.jones@linaro.org \
--to=lee.jones@linaro.org \
--cc=angus.clark@st.com \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=kernel@stlinux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=pekon@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).