From: Lee Jones <lee.jones@linaro.org>
To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: angus.clark@st.com, kernel@stlinux.com, lee.jones@linaro.org,
linux-mtd@lists.infradead.org, pekon@ti.com,
computersforpeace@gmail.com, dwmw2@infradead.org
Subject: [RFC 44/47] mtd: nand: stm_nand_bch: MTD read and write (BCH)
Date: Tue, 25 Mar 2014 08:20:01 +0000 [thread overview]
Message-ID: <1395735604-26706-45-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1395735604-26706-1-git-send-email-lee.jones@linaro.org>
MTD interfaces: Standard set of callbacks for MTD functionality.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mtd/nand/stm_nand_bch.c | 54 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
index bcaed32..f5b0a00 100644
--- a/drivers/mtd/nand/stm_nand_bch.c
+++ b/drivers/mtd/nand/stm_nand_bch.c
@@ -1226,6 +1226,58 @@ static int bch_load_bbt(struct nandi_controller *nandi,
}
/*
+ * MTD Interface: Standard set of callbacks for MTD functionality
+ */
+static int bch_mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, uint8_t *buf)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct nandi_controller *nandi = chip->priv;
+ int ret;
+
+ dev_dbg(nandi->dev, "%s: %llu @ 0x%012llx\n", __func__,
+ (unsigned long long)len, from);
+
+ nand_get_device(mtd, FL_READING);
+
+ ret = bch_read(nandi, from, len, retlen, buf);
+
+ nand_release_device(mtd);
+
+ return ret;
+}
+
+static int bch_mtd_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const uint8_t *buf)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct nandi_controller *nandi = chip->priv;
+ uint32_t page_mask = mtd->writesize - 1;
+ int ret;
+
+ dev_dbg(nandi->dev, "%s: %llu @ 0x%012llx\n", __func__,
+ (unsigned long long)len, to);
+
+ if ((to & page_mask) || (len & page_mask)) {
+ dev_err(nandi->dev, "attempt to write non-page-aligned data\n");
+ return -EINVAL;
+ }
+
+ nand_get_device(mtd, FL_WRITING);
+
+ if (flex_check_wp(nandi)) {
+ dev_dbg(nandi->dev, "device is write-protected\n");
+ return -EIO;
+ }
+
+ ret = bch_write(nandi, to, len, retlen, buf);
+
+ nand_release_device(mtd);
+
+ return ret;
+}
+
+/*
* Helper function for mtd_read_oob(): handles multi-page transfers
* and mapping between BCH sectors and MTD page+OOB data.
*/
@@ -1701,6 +1753,8 @@ static void nandi_set_mtd_defaults(struct nandi_controller *nandi,
mtd->oobavail = 0;
mtd->subpage_sft = 0;
+ mtd->_read = bch_mtd_read;
+ mtd->_write = bch_mtd_write;
mtd->_erase = bch_mtd_erase;
mtd->_read_oob = bch_mtd_read_oob;
mtd->_write_oob = bch_mtd_write_oob;
--
1.8.3.2
next prev parent reply other threads:[~2014-03-25 8:22 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-25 8:19 [RFC 00/47] mtd: nand: Add new driver supporting ST's BCH h/w Lee Jones
2014-03-25 8:19 ` [RFC 01/47] mtd: nand: export useful functions from core driver Lee Jones
2014-03-25 12:57 ` Ezequiel Garcia
2014-03-25 14:58 ` Lee Jones
2014-03-25 8:19 ` [RFC 02/47] mtd: nand: add ONFI NAND Timing Mode Specifications Lee Jones
2014-03-25 17:01 ` Jason Gunthorpe
2014-03-25 8:19 ` [RFC 03/47] mtd: nand: add shared register defines for ST's NAND Controller drivers Lee Jones
2014-03-25 8:19 ` [RFC 04/47] mtd: nand: adding ST's BCH NAND Controller driver Lee Jones
2014-03-25 8:19 ` [RFC 05/47] mtd: nand: stm_nand_bch: IRQ support for " Lee Jones
2014-03-26 7:10 ` Gupta, Pekon
2014-03-25 8:19 ` [RFC 06/47] mtd: nand: stm_nand_bch: change between BCH and Hamming modes Lee Jones
2014-03-25 8:19 ` [RFC 07/47] mtd: nand: stm_nand_bch: initialise the BCH Controller Lee Jones
2014-03-26 10:25 ` Gupta, Pekon
2014-04-30 10:22 ` Lee Jones
2014-04-30 10:59 ` Gupta, Pekon
2014-04-30 12:29 ` Lee Jones
2014-03-25 8:19 ` [RFC 08/47] mtd: nand: stm_nand_bch: supply clock support Lee Jones
2014-03-26 7:15 ` Gupta, Pekon
2014-03-25 8:19 ` [RFC 09/47] mtd: nand: stm_nand_bch: introduce and initialise some important data structures Lee Jones
2014-03-25 8:19 ` [RFC 10/47] mtd: nand: stm_nand_bch: initialise the Hamming Controller Lee Jones
2014-03-25 8:19 ` [RFC 11/47] mtd: nand: stm_nand_bch: add Power Management Lee Jones
2014-03-25 8:19 ` [RFC 12/47] mtd: nand: stm_nand_bch: scan for NAND devices Lee Jones
2014-03-25 8:19 ` [RFC 13/47] mtd: nand: stm_nand_bch: provide Device Tree support Lee Jones
2014-03-26 9:18 ` Gupta, Pekon
2014-04-30 12:54 ` Lee Jones
2014-05-05 6:55 ` Gupta, Pekon
2014-05-09 10:03 ` Lee Jones
2014-05-09 10:32 ` Gupta, Pekon
2014-05-09 10:38 ` Lee Jones
2014-05-19 14:02 ` Lee Jones
2014-03-25 8:19 ` [RFC 14/47] mtd: nand: stm_nand_bch: configure BCH and FLEX by ONFI timing mode Lee Jones
2014-03-25 8:19 ` [RFC 15/47] mtd: nand: stm_nand_bch: add compatible page size check Lee Jones
2014-03-25 8:19 ` [RFC 16/47] mtd: nand: stm_nand_bch: derive some working variables for latter use Lee Jones
2014-03-25 8:19 ` [RFC 17/47] mtd: nand: stm_nand_bch: automatically set EEC mode if requested Lee Jones
2014-03-25 8:19 ` [RFC 18/47] mtd: nand: stm_nand_bch: ensure configuration is compatible with this driver Lee Jones
2014-03-25 8:19 ` [RFC 19/47] mtd: nand: stm_nand_bch: configure BCH read/write/erase programs Lee Jones
2014-03-25 8:19 ` [RFC 20/47] mtd: nand: stm_nand_bch: initialise working buffers Lee Jones
2014-03-25 8:19 ` [RFC 21/47] mtd: nand: stm_nand_bch: provide shared BCH operations Lee Jones
2014-03-25 8:19 ` [RFC 22/47] mtd: nand: stm_nand_bch: check erased page for zeros Lee Jones
2014-03-25 8:19 ` [RFC 23/47] mtd: nand: stm_nand_bch: read and write page (BCH) Lee Jones
2014-03-26 10:17 ` Gupta, Pekon
2014-04-30 11:19 ` Lee Jones
2014-03-25 8:19 ` [RFC 24/47] mtd: nand: stm_nand_bch: find IBBT signature Lee Jones
2014-03-25 8:19 ` [RFC 25/47] mtd: nand: stm_nand_bch: bad block marking helpers Lee Jones
2014-03-25 8:19 ` [RFC 26/47] mtd: nand: stm_nand_bch: populate IBBT BCH Header Lee Jones
2014-03-25 8:19 ` [RFC 27/47] mtd: nand: stm_nand_bch: write IBBT to Flash Lee Jones
2014-03-25 8:19 ` [RFC 28/47] mtd: nand: stm_nand_bch: update flash-resident BBT(s) Lee Jones
2014-03-25 8:19 ` [RFC 29/47] mtd: nand: stm_nand_bch: add Hamming-FLEX operations Lee Jones
2014-03-25 8:19 ` [RFC 30/47] mtd: nand: stm_nand_bch: read and write raw (FLEX) Lee Jones
2014-03-25 8:19 ` [RFC 31/47] mtd: nand: stm_nand_bch: scan block for BBM(s) according to specified BBT options Lee Jones
2014-03-25 8:19 ` [RFC 32/47] mtd: nand: stm_nand_bch: scan for BBMs and build memory-resident BBT Lee Jones
2014-03-25 8:19 ` [RFC 33/47] mtd: nand: stm_nand_bch: search for and load flash-resident BBT Lee Jones
2014-03-25 8:19 ` [RFC 34/47] mtd: nand: stm_nand_bch: " Lee Jones
2014-03-25 8:19 ` [RFC 35/47] mtd: nand: stm_nand_bch: dump bad blocks Lee Jones
2014-03-25 12:53 ` Ezequiel Garcia
2014-03-25 8:19 ` [RFC 36/47] mtd: nand: stm_nand_bch: parse partitions and register an MTD device Lee Jones
2014-03-25 8:19 ` [RFC 37/47] mtd: nand: stm_nand_bch: fetch the bit-flips threshold Lee Jones
2014-03-25 8:19 ` [RFC 38/47] mtd: nand: stm_nand_bch: check WP (FLEX) Lee Jones
2014-03-25 8:19 ` [RFC 39/47] mtd: nand: stm_nand_bch: read and write ops (FLEX) Lee Jones
2014-03-25 8:19 ` [RFC 40/47] mtd: nand: stm_nand_bch: MTD erase (BCH) Lee Jones
2014-03-25 8:19 ` [RFC 41/47] mtd: nand: stm_nand_bch: MTD mark and check for bad blocks (BCH) Lee Jones
2014-03-25 8:19 ` [RFC 42/47] mtd: nand: stm_nand_bch: add read and write OOB (BCH) Lee Jones
2014-03-25 8:20 ` [RFC 43/47] mtd: nand: stm_nand_bch: read and write functions (BCH) Lee Jones
2014-03-26 10:31 ` Gupta, Pekon
2014-04-30 9:19 ` Lee Jones
2014-03-25 8:20 ` Lee Jones [this message]
2014-03-25 8:20 ` [RFC 45/47] mtd: nand: stm_nand_bch: read and write buffers (FLEX) Lee Jones
2014-03-25 8:20 ` [RFC 46/47] mtd: nand: mtd_nand_bch: add remaining FLEX functions Lee Jones
2014-03-25 8:20 ` [RFC 47/47] mtd: nand: stm_nand_bch: catch unsupported calls Lee Jones
2014-03-25 12:50 ` [RFC 00/47] mtd: nand: Add new driver supporting ST's BCH h/w Ezequiel Garcia
2014-03-25 13:11 ` Lee Jones
2014-03-25 22:00 ` Ezequiel Garcia
2014-03-26 7:28 ` Brian Norris
2014-03-27 10:28 ` Lee Jones
2014-04-01 11:29 ` Lee Jones
2014-04-10 20:00 ` Brian Norris
2014-04-30 9:57 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1395735604-26706-45-git-send-email-lee.jones@linaro.org \
--to=lee.jones@linaro.org \
--cc=angus.clark@st.com \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=kernel@stlinux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=pekon@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).