linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: angus.clark@st.com, kernel@stlinux.com, lee.jones@linaro.org,
	linux-mtd@lists.infradead.org, pekon@ti.com,
	computersforpeace@gmail.com, dwmw2@infradead.org
Subject: [RFC 01/47] mtd: nand: export useful functions from core driver
Date: Tue, 25 Mar 2014 08:19:18 +0000	[thread overview]
Message-ID: <1395735604-26706-2-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1395735604-26706-1-git-send-email-lee.jones@linaro.org>

These functions are utilised by the STM BCH NAND Controller driver.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/mtd/nand/nand_base.c | 18 +++++++++++-------
 include/linux/mtd/nand.h     |  6 ++++++
 2 files changed, 17 insertions(+), 7 deletions(-)

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index bd39f7b..070505d 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -90,7 +90,7 @@ static struct nand_ecclayout nand_oob_128 = {
 		 .length = 78} }
 };
 
-static int nand_get_device(struct mtd_info *mtd, int new_state);
+int nand_get_device(struct mtd_info *mtd, int new_state);
 
 static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 			     struct mtd_oob_ops *ops);
@@ -128,7 +128,7 @@ static int check_offs_len(struct mtd_info *mtd,
  *
  * Release chip lock and wake up anyone waiting on the device.
  */
-static void nand_release_device(struct mtd_info *mtd)
+void nand_release_device(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
 
@@ -139,6 +139,7 @@ static void nand_release_device(struct mtd_info *mtd)
 	wake_up(&chip->controller->wq);
 	spin_unlock(&chip->controller->lock);
 }
+EXPORT_SYMBOL_GPL(nand_release_device);
 
 /**
  * nand_read_byte - [DEFAULT] read one byte from the chip
@@ -736,8 +737,7 @@ static void panic_nand_get_device(struct nand_chip *chip,
  *
  * Get the device and lock it for exclusive access
  */
-static int
-nand_get_device(struct mtd_info *mtd, int new_state)
+int nand_get_device(struct mtd_info *mtd, int new_state)
 {
 	struct nand_chip *chip = mtd->priv;
 	spinlock_t *lock = &chip->controller->lock;
@@ -769,6 +769,7 @@ retry:
 	remove_wait_queue(wq, &wait);
 	goto retry;
 }
+EXPORT_SYMBOL_GPL(nand_get_device);
 
 /**
  * panic_nand_wait - [GENERIC] wait until the command is done
@@ -2665,7 +2666,7 @@ erase_exit:
  *
  * Sync is actually a wait for chip ready function.
  */
-static void nand_sync(struct mtd_info *mtd)
+void nand_sync(struct mtd_info *mtd)
 {
 	pr_debug("%s: called\n", __func__);
 
@@ -2674,6 +2675,7 @@ static void nand_sync(struct mtd_info *mtd)
 	/* Release it and go back */
 	nand_release_device(mtd);
 }
+EXPORT_SYMBOL_GPL(nand_sync);
 
 /**
  * nand_block_isbad - [MTD Interface] Check if block at offset is bad
@@ -2757,16 +2759,17 @@ static int nand_onfi_get_features(struct mtd_info *mtd, struct nand_chip *chip,
  * nand_suspend - [MTD Interface] Suspend the NAND flash
  * @mtd: MTD device structure
  */
-static int nand_suspend(struct mtd_info *mtd)
+int nand_suspend(struct mtd_info *mtd)
 {
 	return nand_get_device(mtd, FL_PM_SUSPENDED);
 }
+EXPORT_SYMBOL(nand_suspend);
 
 /**
  * nand_resume - [MTD Interface] Resume the NAND flash
  * @mtd: MTD device structure
  */
-static void nand_resume(struct mtd_info *mtd)
+void nand_resume(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
 
@@ -2776,6 +2779,7 @@ static void nand_resume(struct mtd_info *mtd)
 		pr_err("%s called for a chip which is not in suspended state\n",
 			__func__);
 }
+EXPORT_SYMBOL(nand_resume);
 
 /* Set default functions */
 static void nand_set_defaults(struct nand_chip *chip, int busw)
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 9e6c8f9..f7b6a53 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -698,6 +698,12 @@ extern int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 			   int allowbbt);
 extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
 			size_t *retlen, uint8_t *buf);
+extern void nand_sync(struct mtd_info *mtd);
+extern int nand_suspend(struct mtd_info *mtd);
+extern void nand_resume(struct mtd_info *mtd);
+
+extern int nand_get_device(struct mtd_info *mtd, int new_state);
+extern void nand_release_device(struct mtd_info *mtd);
 
 /**
  * struct platform_nand_chip - chip level device structure
-- 
1.8.3.2

  reply	other threads:[~2014-03-25  8:20 UTC|newest]

Thread overview: 77+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-25  8:19 [RFC 00/47] mtd: nand: Add new driver supporting ST's BCH h/w Lee Jones
2014-03-25  8:19 ` Lee Jones [this message]
2014-03-25 12:57   ` [RFC 01/47] mtd: nand: export useful functions from core driver Ezequiel Garcia
2014-03-25 14:58     ` Lee Jones
2014-03-25  8:19 ` [RFC 02/47] mtd: nand: add ONFI NAND Timing Mode Specifications Lee Jones
2014-03-25 17:01   ` Jason Gunthorpe
2014-03-25  8:19 ` [RFC 03/47] mtd: nand: add shared register defines for ST's NAND Controller drivers Lee Jones
2014-03-25  8:19 ` [RFC 04/47] mtd: nand: adding ST's BCH NAND Controller driver Lee Jones
2014-03-25  8:19 ` [RFC 05/47] mtd: nand: stm_nand_bch: IRQ support for " Lee Jones
2014-03-26  7:10   ` Gupta, Pekon
2014-03-25  8:19 ` [RFC 06/47] mtd: nand: stm_nand_bch: change between BCH and Hamming modes Lee Jones
2014-03-25  8:19 ` [RFC 07/47] mtd: nand: stm_nand_bch: initialise the BCH Controller Lee Jones
2014-03-26 10:25   ` Gupta, Pekon
2014-04-30 10:22     ` Lee Jones
2014-04-30 10:59       ` Gupta, Pekon
2014-04-30 12:29         ` Lee Jones
2014-03-25  8:19 ` [RFC 08/47] mtd: nand: stm_nand_bch: supply clock support Lee Jones
2014-03-26  7:15   ` Gupta, Pekon
2014-03-25  8:19 ` [RFC 09/47] mtd: nand: stm_nand_bch: introduce and initialise some important data structures Lee Jones
2014-03-25  8:19 ` [RFC 10/47] mtd: nand: stm_nand_bch: initialise the Hamming Controller Lee Jones
2014-03-25  8:19 ` [RFC 11/47] mtd: nand: stm_nand_bch: add Power Management Lee Jones
2014-03-25  8:19 ` [RFC 12/47] mtd: nand: stm_nand_bch: scan for NAND devices Lee Jones
2014-03-25  8:19 ` [RFC 13/47] mtd: nand: stm_nand_bch: provide Device Tree support Lee Jones
2014-03-26  9:18   ` Gupta, Pekon
2014-04-30 12:54     ` Lee Jones
2014-05-05  6:55       ` Gupta, Pekon
2014-05-09 10:03         ` Lee Jones
2014-05-09 10:32           ` Gupta, Pekon
2014-05-09 10:38             ` Lee Jones
2014-05-19 14:02             ` Lee Jones
2014-03-25  8:19 ` [RFC 14/47] mtd: nand: stm_nand_bch: configure BCH and FLEX by ONFI timing mode Lee Jones
2014-03-25  8:19 ` [RFC 15/47] mtd: nand: stm_nand_bch: add compatible page size check Lee Jones
2014-03-25  8:19 ` [RFC 16/47] mtd: nand: stm_nand_bch: derive some working variables for latter use Lee Jones
2014-03-25  8:19 ` [RFC 17/47] mtd: nand: stm_nand_bch: automatically set EEC mode if requested Lee Jones
2014-03-25  8:19 ` [RFC 18/47] mtd: nand: stm_nand_bch: ensure configuration is compatible with this driver Lee Jones
2014-03-25  8:19 ` [RFC 19/47] mtd: nand: stm_nand_bch: configure BCH read/write/erase programs Lee Jones
2014-03-25  8:19 ` [RFC 20/47] mtd: nand: stm_nand_bch: initialise working buffers Lee Jones
2014-03-25  8:19 ` [RFC 21/47] mtd: nand: stm_nand_bch: provide shared BCH operations Lee Jones
2014-03-25  8:19 ` [RFC 22/47] mtd: nand: stm_nand_bch: check erased page for zeros Lee Jones
2014-03-25  8:19 ` [RFC 23/47] mtd: nand: stm_nand_bch: read and write page (BCH) Lee Jones
2014-03-26 10:17   ` Gupta, Pekon
2014-04-30 11:19     ` Lee Jones
2014-03-25  8:19 ` [RFC 24/47] mtd: nand: stm_nand_bch: find IBBT signature Lee Jones
2014-03-25  8:19 ` [RFC 25/47] mtd: nand: stm_nand_bch: bad block marking helpers Lee Jones
2014-03-25  8:19 ` [RFC 26/47] mtd: nand: stm_nand_bch: populate IBBT BCH Header Lee Jones
2014-03-25  8:19 ` [RFC 27/47] mtd: nand: stm_nand_bch: write IBBT to Flash Lee Jones
2014-03-25  8:19 ` [RFC 28/47] mtd: nand: stm_nand_bch: update flash-resident BBT(s) Lee Jones
2014-03-25  8:19 ` [RFC 29/47] mtd: nand: stm_nand_bch: add Hamming-FLEX operations Lee Jones
2014-03-25  8:19 ` [RFC 30/47] mtd: nand: stm_nand_bch: read and write raw (FLEX) Lee Jones
2014-03-25  8:19 ` [RFC 31/47] mtd: nand: stm_nand_bch: scan block for BBM(s) according to specified BBT options Lee Jones
2014-03-25  8:19 ` [RFC 32/47] mtd: nand: stm_nand_bch: scan for BBMs and build memory-resident BBT Lee Jones
2014-03-25  8:19 ` [RFC 33/47] mtd: nand: stm_nand_bch: search for and load flash-resident BBT Lee Jones
2014-03-25  8:19 ` [RFC 34/47] mtd: nand: stm_nand_bch: " Lee Jones
2014-03-25  8:19 ` [RFC 35/47] mtd: nand: stm_nand_bch: dump bad blocks Lee Jones
2014-03-25 12:53   ` Ezequiel Garcia
2014-03-25  8:19 ` [RFC 36/47] mtd: nand: stm_nand_bch: parse partitions and register an MTD device Lee Jones
2014-03-25  8:19 ` [RFC 37/47] mtd: nand: stm_nand_bch: fetch the bit-flips threshold Lee Jones
2014-03-25  8:19 ` [RFC 38/47] mtd: nand: stm_nand_bch: check WP (FLEX) Lee Jones
2014-03-25  8:19 ` [RFC 39/47] mtd: nand: stm_nand_bch: read and write ops (FLEX) Lee Jones
2014-03-25  8:19 ` [RFC 40/47] mtd: nand: stm_nand_bch: MTD erase (BCH) Lee Jones
2014-03-25  8:19 ` [RFC 41/47] mtd: nand: stm_nand_bch: MTD mark and check for bad blocks (BCH) Lee Jones
2014-03-25  8:19 ` [RFC 42/47] mtd: nand: stm_nand_bch: add read and write OOB (BCH) Lee Jones
2014-03-25  8:20 ` [RFC 43/47] mtd: nand: stm_nand_bch: read and write functions (BCH) Lee Jones
2014-03-26 10:31   ` Gupta, Pekon
2014-04-30  9:19     ` Lee Jones
2014-03-25  8:20 ` [RFC 44/47] mtd: nand: stm_nand_bch: MTD read and write (BCH) Lee Jones
2014-03-25  8:20 ` [RFC 45/47] mtd: nand: stm_nand_bch: read and write buffers (FLEX) Lee Jones
2014-03-25  8:20 ` [RFC 46/47] mtd: nand: mtd_nand_bch: add remaining FLEX functions Lee Jones
2014-03-25  8:20 ` [RFC 47/47] mtd: nand: stm_nand_bch: catch unsupported calls Lee Jones
2014-03-25 12:50 ` [RFC 00/47] mtd: nand: Add new driver supporting ST's BCH h/w Ezequiel Garcia
2014-03-25 13:11   ` Lee Jones
2014-03-25 22:00     ` Ezequiel Garcia
2014-03-26  7:28       ` Brian Norris
2014-03-27 10:28         ` Lee Jones
2014-04-01 11:29           ` Lee Jones
2014-04-10 20:00             ` Brian Norris
2014-04-30  9:57               ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1395735604-26706-2-git-send-email-lee.jones@linaro.org \
    --to=lee.jones@linaro.org \
    --cc=angus.clark@st.com \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=kernel@stlinux.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=pekon@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).