From: Lee Jones <lee.jones@linaro.org>
To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: angus.clark@st.com, kernel@stlinux.com, lee.jones@linaro.org,
linux-mtd@lists.infradead.org, pekon@ti.com,
computersforpeace@gmail.com, dwmw2@infradead.org
Subject: [RFC 17/47] mtd: nand: stm_nand_bch: automatically set EEC mode if requested
Date: Tue, 25 Mar 2014 08:19:34 +0000 [thread overview]
Message-ID: <1395735604-26706-18-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1395735604-26706-1-git-send-email-lee.jones@linaro.org>
Here we automatically select the strongest ECC scheme compatible with
the size of the OOB.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mtd/nand/stm_nand_bch.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
index f5a3e80..60a7800 100644
--- a/drivers/mtd/nand/stm_nand_bch.c
+++ b/drivers/mtd/nand/stm_nand_bch.c
@@ -32,6 +32,13 @@
/* NANDi BCH Controller properties */
#define NANDI_BCH_SECTOR_SIZE 1024
+/* BCH ECC sizes */
+static int bch_ecc_sizes[] = {
+ [BCH_18BIT_ECC] = 32,
+ [BCH_30BIT_ECC] = 54,
+ [BCH_NO_ECC] = 0,
+};
+
/* Bad Block Table (BBT) */
struct nandi_bbt_info {
uint32_t bbt_size; /* Size of bad-block table */
@@ -135,6 +142,25 @@ static void nandi_disable_interrupts(struct nandi_controller *nandi,
writel(val, nandi->base + NANDBCH_INT_EN);
}
+/* Select strongest ECC scheme compatible with OOB size */
+static int bch_set_ecc_auto(struct nandi_controller *nandi,
+ struct mtd_info *mtd)
+{
+ int oob_bytes_per_sector = mtd->oobsize / nandi->sectors_per_page;
+ int try_ecc_modes[] = { BCH_30BIT_ECC, BCH_18BIT_ECC, -1 };
+ int m, ecc_mode;
+
+ for (m = 0; try_ecc_modes[m] >= 0; m++) {
+ ecc_mode = try_ecc_modes[m];
+ if (oob_bytes_per_sector >= bch_ecc_sizes[ecc_mode]) {
+ nandi->bch_ecc_mode = ecc_mode;
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
static void nandi_set_mtd_defaults(struct nandi_controller *nandi,
struct mtd_info *mtd, struct nand_chip *chip)
{
@@ -792,6 +818,20 @@ static int stm_nand_bch_probe(struct platform_device *pdev)
0x10000) ? true : false;
mtd->writebufsize = mtd->writesize;
+ /* Set ECC mode */
+ if (pdata->bch_ecc_cfg == BCH_ECC_AUTO) {
+ err = bch_set_ecc_auto(nandi, mtd);
+ if (err) {
+ dev_err(nandi->dev, "insufficient OOB for BCH ECC\n");
+ return err;
+ }
+ } else {
+ nandi->bch_ecc_mode = pdata->bch_ecc_cfg;
+ }
+
+ info->ecclayout.eccbytes =
+ nandi->sectors_per_page * bch_ecc_sizes[nandi->bch_ecc_mode];
+
return 0;
}
--
1.8.3.2
next prev parent reply other threads:[~2014-03-25 8:21 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-25 8:19 [RFC 00/47] mtd: nand: Add new driver supporting ST's BCH h/w Lee Jones
2014-03-25 8:19 ` [RFC 01/47] mtd: nand: export useful functions from core driver Lee Jones
2014-03-25 12:57 ` Ezequiel Garcia
2014-03-25 14:58 ` Lee Jones
2014-03-25 8:19 ` [RFC 02/47] mtd: nand: add ONFI NAND Timing Mode Specifications Lee Jones
2014-03-25 17:01 ` Jason Gunthorpe
2014-03-25 8:19 ` [RFC 03/47] mtd: nand: add shared register defines for ST's NAND Controller drivers Lee Jones
2014-03-25 8:19 ` [RFC 04/47] mtd: nand: adding ST's BCH NAND Controller driver Lee Jones
2014-03-25 8:19 ` [RFC 05/47] mtd: nand: stm_nand_bch: IRQ support for " Lee Jones
2014-03-26 7:10 ` Gupta, Pekon
2014-03-25 8:19 ` [RFC 06/47] mtd: nand: stm_nand_bch: change between BCH and Hamming modes Lee Jones
2014-03-25 8:19 ` [RFC 07/47] mtd: nand: stm_nand_bch: initialise the BCH Controller Lee Jones
2014-03-26 10:25 ` Gupta, Pekon
2014-04-30 10:22 ` Lee Jones
2014-04-30 10:59 ` Gupta, Pekon
2014-04-30 12:29 ` Lee Jones
2014-03-25 8:19 ` [RFC 08/47] mtd: nand: stm_nand_bch: supply clock support Lee Jones
2014-03-26 7:15 ` Gupta, Pekon
2014-03-25 8:19 ` [RFC 09/47] mtd: nand: stm_nand_bch: introduce and initialise some important data structures Lee Jones
2014-03-25 8:19 ` [RFC 10/47] mtd: nand: stm_nand_bch: initialise the Hamming Controller Lee Jones
2014-03-25 8:19 ` [RFC 11/47] mtd: nand: stm_nand_bch: add Power Management Lee Jones
2014-03-25 8:19 ` [RFC 12/47] mtd: nand: stm_nand_bch: scan for NAND devices Lee Jones
2014-03-25 8:19 ` [RFC 13/47] mtd: nand: stm_nand_bch: provide Device Tree support Lee Jones
2014-03-26 9:18 ` Gupta, Pekon
2014-04-30 12:54 ` Lee Jones
2014-05-05 6:55 ` Gupta, Pekon
2014-05-09 10:03 ` Lee Jones
2014-05-09 10:32 ` Gupta, Pekon
2014-05-09 10:38 ` Lee Jones
2014-05-19 14:02 ` Lee Jones
2014-03-25 8:19 ` [RFC 14/47] mtd: nand: stm_nand_bch: configure BCH and FLEX by ONFI timing mode Lee Jones
2014-03-25 8:19 ` [RFC 15/47] mtd: nand: stm_nand_bch: add compatible page size check Lee Jones
2014-03-25 8:19 ` [RFC 16/47] mtd: nand: stm_nand_bch: derive some working variables for latter use Lee Jones
2014-03-25 8:19 ` Lee Jones [this message]
2014-03-25 8:19 ` [RFC 18/47] mtd: nand: stm_nand_bch: ensure configuration is compatible with this driver Lee Jones
2014-03-25 8:19 ` [RFC 19/47] mtd: nand: stm_nand_bch: configure BCH read/write/erase programs Lee Jones
2014-03-25 8:19 ` [RFC 20/47] mtd: nand: stm_nand_bch: initialise working buffers Lee Jones
2014-03-25 8:19 ` [RFC 21/47] mtd: nand: stm_nand_bch: provide shared BCH operations Lee Jones
2014-03-25 8:19 ` [RFC 22/47] mtd: nand: stm_nand_bch: check erased page for zeros Lee Jones
2014-03-25 8:19 ` [RFC 23/47] mtd: nand: stm_nand_bch: read and write page (BCH) Lee Jones
2014-03-26 10:17 ` Gupta, Pekon
2014-04-30 11:19 ` Lee Jones
2014-03-25 8:19 ` [RFC 24/47] mtd: nand: stm_nand_bch: find IBBT signature Lee Jones
2014-03-25 8:19 ` [RFC 25/47] mtd: nand: stm_nand_bch: bad block marking helpers Lee Jones
2014-03-25 8:19 ` [RFC 26/47] mtd: nand: stm_nand_bch: populate IBBT BCH Header Lee Jones
2014-03-25 8:19 ` [RFC 27/47] mtd: nand: stm_nand_bch: write IBBT to Flash Lee Jones
2014-03-25 8:19 ` [RFC 28/47] mtd: nand: stm_nand_bch: update flash-resident BBT(s) Lee Jones
2014-03-25 8:19 ` [RFC 29/47] mtd: nand: stm_nand_bch: add Hamming-FLEX operations Lee Jones
2014-03-25 8:19 ` [RFC 30/47] mtd: nand: stm_nand_bch: read and write raw (FLEX) Lee Jones
2014-03-25 8:19 ` [RFC 31/47] mtd: nand: stm_nand_bch: scan block for BBM(s) according to specified BBT options Lee Jones
2014-03-25 8:19 ` [RFC 32/47] mtd: nand: stm_nand_bch: scan for BBMs and build memory-resident BBT Lee Jones
2014-03-25 8:19 ` [RFC 33/47] mtd: nand: stm_nand_bch: search for and load flash-resident BBT Lee Jones
2014-03-25 8:19 ` [RFC 34/47] mtd: nand: stm_nand_bch: " Lee Jones
2014-03-25 8:19 ` [RFC 35/47] mtd: nand: stm_nand_bch: dump bad blocks Lee Jones
2014-03-25 12:53 ` Ezequiel Garcia
2014-03-25 8:19 ` [RFC 36/47] mtd: nand: stm_nand_bch: parse partitions and register an MTD device Lee Jones
2014-03-25 8:19 ` [RFC 37/47] mtd: nand: stm_nand_bch: fetch the bit-flips threshold Lee Jones
2014-03-25 8:19 ` [RFC 38/47] mtd: nand: stm_nand_bch: check WP (FLEX) Lee Jones
2014-03-25 8:19 ` [RFC 39/47] mtd: nand: stm_nand_bch: read and write ops (FLEX) Lee Jones
2014-03-25 8:19 ` [RFC 40/47] mtd: nand: stm_nand_bch: MTD erase (BCH) Lee Jones
2014-03-25 8:19 ` [RFC 41/47] mtd: nand: stm_nand_bch: MTD mark and check for bad blocks (BCH) Lee Jones
2014-03-25 8:19 ` [RFC 42/47] mtd: nand: stm_nand_bch: add read and write OOB (BCH) Lee Jones
2014-03-25 8:20 ` [RFC 43/47] mtd: nand: stm_nand_bch: read and write functions (BCH) Lee Jones
2014-03-26 10:31 ` Gupta, Pekon
2014-04-30 9:19 ` Lee Jones
2014-03-25 8:20 ` [RFC 44/47] mtd: nand: stm_nand_bch: MTD read and write (BCH) Lee Jones
2014-03-25 8:20 ` [RFC 45/47] mtd: nand: stm_nand_bch: read and write buffers (FLEX) Lee Jones
2014-03-25 8:20 ` [RFC 46/47] mtd: nand: mtd_nand_bch: add remaining FLEX functions Lee Jones
2014-03-25 8:20 ` [RFC 47/47] mtd: nand: stm_nand_bch: catch unsupported calls Lee Jones
2014-03-25 12:50 ` [RFC 00/47] mtd: nand: Add new driver supporting ST's BCH h/w Ezequiel Garcia
2014-03-25 13:11 ` Lee Jones
2014-03-25 22:00 ` Ezequiel Garcia
2014-03-26 7:28 ` Brian Norris
2014-03-27 10:28 ` Lee Jones
2014-04-01 11:29 ` Lee Jones
2014-04-10 20:00 ` Brian Norris
2014-04-30 9:57 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1395735604-26706-18-git-send-email-lee.jones@linaro.org \
--to=lee.jones@linaro.org \
--cc=angus.clark@st.com \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=kernel@stlinux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=pekon@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).