[PATCH 15/30] PCI: tegra: Fix PLLE powerdown issue due to CLKREQ# signal

[Manikanta Maddireddy <mmaddireddy@nvidia.com>]

Disable controllers which failed to link up and configure CLKREQ# signals
of these controllers as GPIO. This is required to avoid CLKREQ# signal of
inactive controllers interfering with PLLE powerdown sequence.

PCIE_CLKREQ_GPIO bits are defined only in Tegra186, however programming
these bits in other SoCs doesn't cause any side effects. Program these
bits for all Tegra SoCs to avoid conditional check.

Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
---
 drivers/pci/controller/pci-tegra.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index 7e24eac12668..8e5fdc8ce3d6 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -160,6 +160,8 @@
 #define  AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_211	(0x1 << 20)
 #define  AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_411	(0x2 << 20)
 #define  AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_111	(0x2 << 20)
+#define  AFI_PCIE_CONFIG_PCIE_CLKREQ_GPIO(x)		(1 << ((x) + 29))
+#define  AFI_PCIE_CONFIG_PCIE_CLKREQ_GPIO_ALL		(0x7 << 29)
 
 #define AFI_FUSE			0x104
 #define  AFI_FUSE_PCIE_T0_GEN2_DIS	(1 << 2)
@@ -733,6 +735,15 @@ static void tegra_pcie_port_disable(struct tegra_pcie_port *port)
 
 	value &= ~AFI_PEX_CTRL_REFCLK_EN;
 	afi_writel(port->pcie, value, ctrl);
+
+	/*
+	 * disable PCIe device and set CLKREQ# as gpio
+	 * to allow PLLE power down
+	 */
+	value = afi_readl(port->pcie, AFI_PCIE_CONFIG);
+	value |= AFI_PCIE_CONFIG_PCIE_DISABLE(port->index);
+	value |= AFI_PCIE_CONFIG_PCIE_CLKREQ_GPIO(port->index);
+	afi_writel(port->pcie, value, AFI_PCIE_CONFIG);
 }
 
 static void tegra_pcie_port_free(struct tegra_pcie_port *port)
@@ -1147,9 +1158,12 @@ static int tegra_pcie_enable_controller(struct tegra_pcie *pcie)
 	value = afi_readl(pcie, AFI_PCIE_CONFIG);
 	value &= ~AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK;
 	value |= AFI_PCIE_CONFIG_PCIE_DISABLE_ALL | pcie->xbar_config;
+	value |= AFI_PCIE_CONFIG_PCIE_CLKREQ_GPIO_ALL;
 
-	list_for_each_entry(port, &pcie->ports, list)
+	list_for_each_entry(port, &pcie->ports, list) {
 		value &= ~AFI_PCIE_CONFIG_PCIE_DISABLE(port->index);
+		value &= ~AFI_PCIE_CONFIG_PCIE_CLKREQ_GPIO(port->index);
+	}
 
 	afi_writel(pcie, value, AFI_PCIE_CONFIG);
 
-- 
2.17.1