linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Cc: thierry.reding@gmail.com, bhelgaas@google.com,
	robh+dt@kernel.org, mark.rutland@arm.com, jonathanh@nvidia.com,
	vidyas@nvidia.com, linux-tegra@vger.kernel.org,
	linux-pci@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH V6 06/27] PCI: tegra: Add PCIe Gen2 link speed support
Date: Thu, 20 Jun 2019 15:32:51 +0100	[thread overview]
Message-ID: <20190620143251.GB31996@e121166-lin.cambridge.arm.com> (raw)
In-Reply-To: <20190618180206.4908-7-mmaddireddy@nvidia.com>

On Tue, Jun 18, 2019 at 11:31:45PM +0530, Manikanta Maddireddy wrote:
> Tegra124, Tegra132, Tegra210 and Tegra186 support Gen2 link speed. After
> PCIe link is up in Gen1, set target link speed as Gen2 and retrain link.
> Link switches to Gen2 speed if Gen2 capable end point is connected, else
> link stays in Gen1.
> 
> Per PCIe 4.0r0.9 sec 7.6.3.7 implementation note, driver need to wait for
> PCIe LTSSM to come back from recovery before retraining the link.
> 
> Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
> Acked-by: Thierry Reding <treding@nvidia.com>
> ---
> V6: No change
> 
> V5: No change
> 
> V4: No change
> 
> V3: Added blank line after each while loop.
> 
> V2: Changed "for loop" to "while", to make it compact and handled coding
> style comments.
> 
>  drivers/pci/controller/pci-tegra.c | 64 ++++++++++++++++++++++++++++++
>  1 file changed, 64 insertions(+)
> 
> diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
> index 5e9fcef5f8eb..5d19067f7193 100644
> --- a/drivers/pci/controller/pci-tegra.c
> +++ b/drivers/pci/controller/pci-tegra.c
> @@ -191,6 +191,8 @@
>  #define  RP_LINK_CONTROL_STATUS_DL_LINK_ACTIVE	0x20000000
>  #define  RP_LINK_CONTROL_STATUS_LINKSTAT_MASK	0x3fff0000
>  
> +#define RP_LINK_CONTROL_STATUS_2		0x000000b0
> +
>  #define PADS_CTL_SEL		0x0000009c
>  
>  #define PADS_CTL		0x000000a0
> @@ -226,6 +228,7 @@
>  #define PADS_REFCLK_CFG_DRVI_SHIFT		12 /* 15:12 */
>  
>  #define PME_ACK_TIMEOUT 10000
> +#define LINK_RETRAIN_TIMEOUT 100000 /* in usec */
>  
>  struct tegra_msi {
>  	struct msi_controller chip;
> @@ -2089,6 +2092,64 @@ static bool tegra_pcie_port_check_link(struct tegra_pcie_port *port)
>  	return false;
>  }
>  
> +static void tegra_pcie_change_link_speed(struct tegra_pcie *pcie)
> +{
> +	struct device *dev = pcie->dev;
> +	struct tegra_pcie_port *port, *tmp;
> +	ktime_t deadline;
> +	u32 value;
> +
> +	list_for_each_entry_safe(port, tmp, &pcie->ports, list) {

And the reason to use the _safe version is ?

Lorenzo

> +		/*
> +		 * "Supported Link Speeds Vector" in "Link Capabilities 2"
> +		 * is not supported by Tegra. tegra_pcie_change_link_speed()
> +		 * is called only for Tegra chips which support Gen2.
> +		 * So there no harm if supported link speed is not verified.
> +		 */
> +		value = readl(port->base + RP_LINK_CONTROL_STATUS_2);
> +		value &= ~PCI_EXP_LNKSTA_CLS;
> +		value |= PCI_EXP_LNKSTA_CLS_5_0GB;
> +		writel(value, port->base + RP_LINK_CONTROL_STATUS_2);
> +
> +		/*
> +		 * Poll until link comes back from recovery to avoid race
> +		 * condition.
> +		 */
> +		deadline = ktime_add_us(ktime_get(), LINK_RETRAIN_TIMEOUT);
> +
> +		while (ktime_before(ktime_get(), deadline)) {
> +			value = readl(port->base + RP_LINK_CONTROL_STATUS);
> +			if ((value & PCI_EXP_LNKSTA_LT) == 0)
> +				break;
> +
> +			usleep_range(2000, 3000);
> +		}
> +
> +		if (value & PCI_EXP_LNKSTA_LT)
> +			dev_warn(dev, "PCIe port %u link is in recovery\n",
> +				 port->index);
> +
> +		/* Retrain the link */
> +		value = readl(port->base + RP_LINK_CONTROL_STATUS);
> +		value |= PCI_EXP_LNKCTL_RL;
> +		writel(value, port->base + RP_LINK_CONTROL_STATUS);
> +
> +		deadline = ktime_add_us(ktime_get(), LINK_RETRAIN_TIMEOUT);
> +
> +		while (ktime_before(ktime_get(), deadline)) {
> +			value = readl(port->base + RP_LINK_CONTROL_STATUS);
> +			if ((value & PCI_EXP_LNKSTA_LT) == 0)
> +				break;
> +
> +			usleep_range(2000, 3000);
> +		}
> +
> +		if (value & PCI_EXP_LNKSTA_LT)
> +			dev_err(dev, "failed to retrain link of port %u\n",
> +				port->index);
> +	}
> +}
> +
>  static void tegra_pcie_enable_ports(struct tegra_pcie *pcie)
>  {
>  	struct device *dev = pcie->dev;
> @@ -2113,6 +2174,9 @@ static void tegra_pcie_enable_ports(struct tegra_pcie *pcie)
>  		tegra_pcie_port_disable(port);
>  		tegra_pcie_port_free(port);
>  	}
> +
> +	if (pcie->soc->has_gen2)
> +		tegra_pcie_change_link_speed(pcie);
>  }
>  
>  static void tegra_pcie_disable_ports(struct tegra_pcie *pcie)
> -- 
> 2.17.1
> 

  reply	other threads:[~2019-06-20 14:32 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-18 18:01 [PATCH V6 00/27] Enable Tegra PCIe root port features Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 01/27] soc/tegra: pmc: Export tegra_powergate_power_on() Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 02/27] PCI: tegra: Handle failure cases in tegra_pcie_power_on() Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 03/27] PCI: tegra: Rearrange Tegra PCIe driver functions Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 04/27] PCI: tegra: Mask AFI_INTR in runtime suspend Manikanta Maddireddy
2019-06-20 14:27   ` Lorenzo Pieralisi
2019-06-20 14:46     ` Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 05/27] PCI: tegra: Fix PCIe host power up sequence Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 06/27] PCI: tegra: Add PCIe Gen2 link speed support Manikanta Maddireddy
2019-06-20 14:32   ` Lorenzo Pieralisi [this message]
2019-06-20 14:57     ` Manikanta Maddireddy
2019-06-20 15:22       ` Lorenzo Pieralisi
2019-06-18 18:01 ` [PATCH V6 07/27] PCI: tegra: Advertise PCIe Advanced Error Reporting (AER) capability Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 08/27] PCI: tegra: Program UPHY electrical settings for Tegra210 Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 09/27] PCI: tegra: Enable opportunistic UpdateFC and ACK Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 10/27] PCI: tegra: Disable AFI dynamic clock gating Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 11/27] PCI: tegra: Process pending DLL transactions before entering L1 or L2 Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 12/27] PCI: tegra: Enable PCIe xclk clock clamping Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 13/27] PCI: tegra: Increase the deskew retry time Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 14/27] PCI: tegra: Add SW fixup for RAW violations Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 15/27] PCI: tegra: Update flow control timer frequency in Tegra210 Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 16/27] PCI: tegra: Set target speed as Gen1 before starting LTSSM Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 17/27] PCI: tegra: Fix PLLE power down issue due to CLKREQ# signal Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 18/27] PCI: tegra: Program AFI_CACHE* registers only for Tegra20 Manikanta Maddireddy
2019-06-20 16:26   ` Lorenzo Pieralisi
2019-06-20 16:35     ` Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 19/27] PCI: tegra: Change PRSNT_SENSE IRQ log to debug Manikanta Maddireddy
2019-06-18 18:01 ` [PATCH V6 20/27] PCI: tegra: Disable MSI for Tegra PCIe root port Manikanta Maddireddy
2019-06-18 19:48   ` Bjorn Helgaas
2019-06-19  3:55     ` Manikanta Maddireddy
2019-06-19  9:50       ` Lorenzo Pieralisi
2019-06-18 18:02 ` [PATCH V6 21/27] PCI: tegra: Add AFI_PEX2_CTRL reg offset as part of soc struct Manikanta Maddireddy
2019-06-18 18:02 ` [PATCH V6 22/27] dt-bindings: pci: tegra: Document PCIe DPD pinctrl optional prop Manikanta Maddireddy
2019-06-18 18:02 ` [PATCH V6 23/27] arm64: tegra: Add PEX DPD states as pinctrl properties Manikanta Maddireddy
2019-06-20 10:14   ` Thierry Reding
2019-06-18 18:02 ` [PATCH V6 24/27] PCI: tegra: Put PEX CLK & BIAS pads in DPD mode Manikanta Maddireddy
2019-06-18 18:02 ` [PATCH V6 25/27] PCI: Add DT binding for "reset-gpios" property Manikanta Maddireddy
2019-06-18 18:02 ` [PATCH V6 26/27] PCI: tegra: Add support for GPIO based PERST# Manikanta Maddireddy
2019-07-04 14:48   ` Jon Hunter
2019-07-04 15:29     ` Manikanta Maddireddy
2019-07-04 17:23       ` Jon Hunter
2019-06-18 18:02 ` [PATCH V6 27/27] PCI: tegra: Change link retry log level to debug Manikanta Maddireddy
2019-06-20 10:25 ` [PATCH V6 00/27] Enable Tegra PCIe root port features Thierry Reding
2019-06-20 10:53   ` Lorenzo Pieralisi
2019-06-20 11:14     ` Thierry Reding
2019-06-20 16:46 ` Lorenzo Pieralisi
2019-06-20 17:23   ` Manikanta Maddireddy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190620143251.GB31996@e121166-lin.cambridge.arm.com \
    --to=lorenzo.pieralisi@arm.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jonathanh@nvidia.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mmaddireddy@nvidia.com \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    --cc=vidyas@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).