linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Naveen Naidu <naveennaidu479@gmail.com>
To: bhelgaas@google.com
Cc: Naveen Naidu <naveennaidu479@gmail.com>,
	linux-kernel-mentees@lists.linuxfoundation.org,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Kuppuswamy Sathyanarayanan 
	<sathyanarayanan.kuppuswamy@linux.intel.com>,
	Amey Narkhede <ameynarkhede03@gmail.com>,
	Lukas Wunner <lukas@wunner.de>
Subject: [PATCH 16/22] PCI: pciehp: Use RESPONSE_IS_PCI_ERROR() to check read from hardware
Date: Mon, 11 Oct 2021 23:37:33 +0530	[thread overview]
Message-ID: <36c7c3005c4d86a6884b270807d84433a86c0953.1633972263.git.naveennaidu479@gmail.com> (raw)
In-Reply-To: <cover.1633972263.git.naveennaidu479@gmail.com>

An MMIO read from a PCI device that doesn't exist or doesn't respond
causes a PCI error.  There's no real data to return to satisfy the
CPU read, so most hardware fabricates ~0 data.

Use RESPONSE_IS_PCI_ERROR() to check the response we get when we read
data from hardware.

This helps unify PCI error response checking and make error checks
consistent and easier to find.

Compile tested only.

Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com>
---
 drivers/pci/hotplug/pciehp_hpc.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 3024d7e85e6a..8a2f6bb643b5 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -89,7 +89,7 @@ static int pcie_poll_cmd(struct controller *ctrl, int timeout)
 
 	do {
 		pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
-		if (slot_status == (u16) ~0) {
+		if (RESPONSE_IS_PCI_ERROR(&slot_status)) {
 			ctrl_info(ctrl, "%s: no response from device\n",
 				  __func__);
 			return 0;
@@ -165,7 +165,7 @@ static void pcie_do_write_cmd(struct controller *ctrl, u16 cmd,
 	pcie_wait_cmd(ctrl);
 
 	pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl);
-	if (slot_ctrl == (u16) ~0) {
+	if (RESPONSE_IS_PCI_ERROR(&slot_ctrl)) {
 		ctrl_info(ctrl, "%s: no response from device\n", __func__);
 		goto out;
 	}
@@ -236,7 +236,7 @@ int pciehp_check_link_active(struct controller *ctrl)
 	int ret;
 
 	ret = pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
-	if (ret == PCIBIOS_DEVICE_NOT_FOUND || lnk_status == (u16)~0)
+	if (ret == PCIBIOS_DEVICE_NOT_FOUND || RESPONSE_IS_PCI_ERROR(&lnk_status))
 		return -ENODEV;
 
 	ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA);
@@ -443,7 +443,7 @@ int pciehp_card_present(struct controller *ctrl)
 	int ret;
 
 	ret = pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
-	if (ret == PCIBIOS_DEVICE_NOT_FOUND || slot_status == (u16)~0)
+	if (ret == PCIBIOS_DEVICE_NOT_FOUND || RESPONSE_IS_PCI_ERROR(&slot_status))
 		return -ENODEV;
 
 	return !!(slot_status & PCI_EXP_SLTSTA_PDS);
@@ -621,7 +621,7 @@ static irqreturn_t pciehp_isr(int irq, void *dev_id)
 
 read_status:
 	pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &status);
-	if (status == (u16) ~0) {
+	if (RESPONSE_IS_PCI_ERROR(&status)) {
 		ctrl_info(ctrl, "%s: no response from device\n", __func__);
 		if (parent)
 			pm_runtime_put(parent);
-- 
2.25.1


  parent reply	other threads:[~2021-10-11 18:08 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-11 17:35 [PATCH 00/22] PCI: Unify PCI error response checking Naveen Naidu
2021-10-11 17:37 ` [PATCH 01/22] PCI: Add PCI_ERROR_RESPONSE and it's related defintions Naveen Naidu
2021-10-11 17:38 ` [PATCH 02/22] PCI: Unify PCI error response checking Naveen Naidu
2021-10-11 22:05   ` Rob Herring
2021-10-12 16:21     ` Naveen Naidu
2021-10-12 18:02       ` Rob Herring
2021-10-12 22:52       ` Pali Rohár
2021-10-13  2:43     ` Bjorn Helgaas
2021-10-13 13:06       ` Rob Herring
2021-10-13 17:16         ` Naveen Naidu
2021-10-13 17:54           ` Pali Rohár
2021-10-13 18:48           ` Bjorn Helgaas
2021-10-13 21:47           ` Rob Herring
2021-10-13 22:03             ` Pali Rohár
2021-10-13 22:12             ` Bjorn Helgaas
2021-10-11 17:45 ` [PATCH 03/22] PCI: thunder: Use SET_PCI_ERROR_RESPONSE() when device not found Naveen Naidu
2021-10-11 17:46 ` [PATCH 04/22] PCI: iproc: " Naveen Naidu
2021-10-11 17:51 ` [PATCH 05/22] PCI: mediatek: " Naveen Naidu
2021-10-11 17:52 ` [PATCH 06/22] PCI: exynos: " Naveen Naidu
2021-10-11 17:53 ` [PATCH 07/22] PCI: histb: " Naveen Naidu
2021-10-11 17:55 ` [PATCH 08/22] PCI: kirin: " Naveen Naidu
2021-10-11 17:56 ` [PATCH 09/22] PCI: aardvark: " Naveen Naidu
2021-10-11 18:08   ` Pali Rohár
2021-10-11 18:28     ` Naveen Naidu
     [not found]     ` <20211011182526.kboaxqofdpd2jjrl@theprophet>
2021-10-11 18:41       ` Pali Rohár
2021-10-12 15:59         ` Naveen Naidu
2021-10-13  2:13           ` Bjorn Helgaas
2021-10-13 17:59             ` Pali Rohár
2021-10-11 18:00 ` [PATCH 10/22] PCI: mvebu: " Naveen Naidu
2021-10-11 18:00 ` [PATCH 11/22] PCI: altera: " Naveen Naidu
2021-10-11 18:02 ` [PATCH 12/22] PCI: rcar: " Naveen Naidu
2021-10-11 18:02 ` [PATCH 13/22] PCI: rockchip: " Naveen Naidu
2021-10-11 18:04 ` [PATCH 14/22] PCI/ERR: Use RESPONSE_IS_PCI_ERROR() to check read from hardware Naveen Naidu
2021-10-11 18:06 ` [PATCH 15/22] PCI: vmd: " Naveen Naidu
2021-10-14 18:04   ` Jonathan Derrick
2021-10-11 18:07 ` Naveen Naidu [this message]
2021-10-11 19:47   ` [PATCH 16/22] PCI: pciehp: " Lukas Wunner
2021-10-12 16:05     ` Naveen Naidu
2021-10-12 23:12       ` Pali Rohár
2021-10-13 12:20         ` Lukas Wunner
2021-10-11 18:08 ` [PATCH 17/22] PCI/DPC: " Naveen Naidu
2021-10-11 18:10 ` [PATCH 18/22] PCI/PME: " Naveen Naidu
2021-10-11 18:11 ` [PATCH 19/22] PCI: cpqphp: " Naveen Naidu
2021-10-11 18:11 ` [PATCH 20/22] PCI: keystone: Use PCI_ERROR_RESPONSE to specify hardware error Naveen Naidu
2021-10-11 18:12 ` [PATCH 21/22] PCI: hv: Use PCI_ERROR_RESPONSE to specify hardware read error Naveen Naidu
2021-10-11 18:13 ` [PATCH 22/22] PCI: xgene: Use PCI_ERROR_RESPONSE to specify hardware error Naveen Naidu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=36c7c3005c4d86a6884b270807d84433a86c0953.1633972263.git.naveennaidu479@gmail.com \
    --to=naveennaidu479@gmail.com \
    --cc=ameynarkhede03@gmail.com \
    --cc=bhelgaas@google.com \
    --cc=linux-kernel-mentees@lists.linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=sathyanarayanan.kuppuswamy@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).