linux-riscv.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
To: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Conor Dooley <Conor.Dooley@microchip.com>,
	Anup Patel <anup@brainfault.org>,
	linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
	Prabhakar <prabhakar.csengg@gmail.com>,
	Biju Das <biju.das.jz@bp.renesas.com>,
	Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [PATCH v2 5/8] riscv: dts: renesas: Add initial devicetree for Renesas RZ/Five SoC
Date: Mon, 15 Aug 2022 16:14:48 +0100	[thread overview]
Message-ID: <20220815151451.23293-6-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)
In-Reply-To: <20220815151451.23293-1-prabhakar.mahadev-lad.rj@bp.renesas.com>

Add initial device tree for Renesas RZ/Five RISC-V CPU Core (AX45MP
Single).

Below is the list of IP blocks added in the initial SoC DTSI which can be
used to boot via initramfs on RZ/Five SMARC EVK:
- AX45MP CPU
- CPG
- PINCTRL
- PLIC
- SCIF0
- SYSC

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1->v2
* Dropped including makefile change
* Updated ndev count
---
 arch/riscv/boot/dts/renesas/r9a07g043.dtsi | 121 +++++++++++++++++++++
 1 file changed, 121 insertions(+)
 create mode 100644 arch/riscv/boot/dts/renesas/r9a07g043.dtsi

diff --git a/arch/riscv/boot/dts/renesas/r9a07g043.dtsi b/arch/riscv/boot/dts/renesas/r9a07g043.dtsi
new file mode 100644
index 000000000000..b288d2607796
--- /dev/null
+++ b/arch/riscv/boot/dts/renesas/r9a07g043.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/Five SoC
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/r9a07g043-cpg.h>
+
+/ {
+	compatible = "renesas,r9a07g043";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
+	extal_clk: extal-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <24000000>;
+
+		ax45mp: cpu@0 {
+			compatible = "andestech,ax45mp", "riscv";
+			device_type = "cpu";
+			reg = <0x0>;
+			status = "okay";
+			riscv,isa = "rv64imafdc";
+			mmu-type = "riscv,sv39";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <0x40>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <0x40>;
+			clocks = <&cpg CPG_CORE R9A07G043_AX45MP_CORE0_CLK>,
+				 <&cpg CPG_CORE R9A07G043_AX45MP_ACLK>;
+
+			cpu0_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&plic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scif0: serial@1004b800 {
+			compatible = "renesas,scif-r9a07g043",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004b800 0 0x400>;
+			interrupts = <412 IRQ_TYPE_LEVEL_HIGH>,
+				     <414 IRQ_TYPE_LEVEL_HIGH>,
+				     <415 IRQ_TYPE_LEVEL_HIGH>,
+				     <413 IRQ_TYPE_LEVEL_HIGH>,
+				     <416 IRQ_TYPE_LEVEL_HIGH>,
+				     <416 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G043_SCIF0_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_SCIF0_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@11010000 {
+			compatible = "renesas,r9a07g043-cpg";
+			reg = <0 0x11010000 0 0x10000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#reset-cells = <1>;
+			#power-domain-cells = <0>;
+		};
+
+		sysc: system-controller@11020000 {
+			compatible = "renesas,r9a07g043-sysc";
+			reg = <0 0x11020000 0 0x10000>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@11030000 {
+			compatible = "renesas,r9a07g043-pinctrl";
+			reg = <0 0x11030000 0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			gpio-ranges = <&pinctrl 0 0 152>;
+			clocks = <&cpg CPG_MOD R9A07G043_GPIO_HCLK>;
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_GPIO_RSTN>,
+				 <&cpg R9A07G043_GPIO_PORT_RESETN>,
+				 <&cpg R9A07G043_GPIO_SPARE_RESETN>;
+		};
+
+		plic: interrupt-controller@12c00000 {
+			compatible = "renesas,r9a07g043-plic", "andestech,nceplic100";
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			riscv,ndev = <512>;
+			interrupt-controller;
+			reg = <0x0 0x12c00000 0 0x400000>;
+			clocks = <&cpg CPG_MOD R9A07G043_NCEPLIC_ACLK>;
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_NCEPLIC_ARESETN>;
+			interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9>;
+		};
+	};
+};
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  parent reply	other threads:[~2022-08-15 15:17 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-15 15:14 [PATCH v2 0/8] Add support for Renesas RZ/Five SoC Lad Prabhakar
2022-08-15 15:14 ` [PATCH v2 1/8] dt-bindings: riscv: Sort the CPU core list alphabetically Lad Prabhakar
2022-08-15 19:11   ` Conor.Dooley
2022-08-18 13:00   ` Geert Uytterhoeven
2022-08-18 13:00   ` Geert Uytterhoeven
2022-08-15 15:14 ` [PATCH v2 2/8] dt-bindings: riscv: Add Andes AX45MP core to the list Lad Prabhakar
2022-08-18 14:55   ` Geert Uytterhoeven
2022-08-15 15:14 ` [PATCH v2 3/8] dt-bindings: soc: renesas: renesas.yaml: Document Renesas RZ/Five SoC Lad Prabhakar
2022-08-15 19:14   ` Conor.Dooley
2022-08-15 19:40     ` Lad, Prabhakar
2022-08-15 19:42       ` Conor.Dooley
2022-08-16  7:52   ` Krzysztof Kozlowski
2022-08-18 15:00   ` Geert Uytterhoeven
2022-08-18 18:14     ` Lad, Prabhakar
2022-08-15 15:14 ` [PATCH v2 4/8] RISC-V: Kconfig.socs: Add Renesas RZ/Five SoC kconfig option Lad Prabhakar
2022-08-15 19:10   ` Conor.Dooley
2022-08-15 19:57     ` Lad, Prabhakar
2022-08-15 20:05       ` Conor.Dooley
2022-08-15 21:44         ` Lad, Prabhakar
2022-08-18 15:16   ` Geert Uytterhoeven
2022-08-18 18:19     ` Lad, Prabhakar
2022-08-18 18:53       ` Conor.Dooley
2022-08-19  7:35         ` Geert Uytterhoeven
2022-08-19  7:59           ` Conor.Dooley
2022-08-15 15:14 ` Lad Prabhakar [this message]
2022-08-19  8:04   ` [PATCH v2 5/8] riscv: dts: renesas: Add initial devicetree for Renesas RZ/Five SoC Geert Uytterhoeven
2022-08-19 11:42     ` Lad, Prabhakar
2022-08-19 18:40   ` Conor.Dooley
2022-08-20  8:45     ` Geert Uytterhoeven
2022-08-20  8:49       ` Conor.Dooley
2022-08-20 12:07         ` Geert Uytterhoeven
2022-08-15 15:14 ` [PATCH v2 6/8] riscv: dts: renesas: Add minimal DTS for Renesas RZ/Five SMARC EVK Lad Prabhakar
2022-08-15 19:00   ` Conor.Dooley
2022-08-15 20:16     ` Lad, Prabhakar
2022-08-19  8:25       ` Geert Uytterhoeven
2022-08-19 11:39         ` Lad, Prabhakar
2022-08-19 18:15           ` Conor.Dooley
2022-08-19  8:11   ` Geert Uytterhoeven
2022-08-15 15:14 ` [PATCH v2 7/8] MAINTAINERS: Add entry for Renesas RISC-V architecture Lad Prabhakar
2022-08-19  8:42   ` Geert Uytterhoeven
2022-08-19  9:08     ` Lad, Prabhakar
2022-08-15 15:14 ` [PATCH v2 8/8] RISC-V: configs: defconfig: Enable Renesas RZ/Five SoC Lad Prabhakar
2022-08-15 18:52   ` Conor.Dooley
2022-08-15 19:44     ` Lad, Prabhakar
2022-08-15 19:49       ` Conor.Dooley
2022-08-19  8:46   ` Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220815151451.23293-6-prabhakar.mahadev-lad.rj@bp.renesas.com \
    --to=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=Conor.Dooley@microchip.com \
    --cc=anup@brainfault.org \
    --cc=aou@eecs.berkeley.edu \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=prabhakar.csengg@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).