From: Arnd Bergmann <arnd@arndb.de>
To: Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Kyungmin Park <kyungmin.park@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linus.walleij@linaro.org,
Arnd Bergmann <arnd@arndb.de>,
Tomasz Figa <tomasz.figa@gmail.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 05/36] ARM: samsung: make pm-debug platform independent
Date: Thu, 10 Oct 2019 22:29:49 +0200 [thread overview]
Message-ID: <20191010203043.1241612-5-arnd@arndb.de> (raw)
In-Reply-To: <20191010203043.1241612-1-arnd@arndb.de>
The pm-debug code is one of the few things shared between s3c24xx/s3c64xx
and the newer s5pv210. In order to make s5pv210 independent of plat-samsung,
change the common bits of this code to no longer reference the s3c specific
bits.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-s3c24xx/include/mach/pm-core.h | 7 +--
arch/arm/mach-s3c64xx/include/mach/pm-core.h | 44 +---------------
arch/arm/mach-s3c64xx/pm.c | 50 +++++++++++++++++++
arch/arm/mach-s5pv210/pm.c | 6 +--
.../arm/plat-samsung/include/plat/pm-common.h | 29 +++++------
arch/arm/plat-samsung/pm-debug.c | 23 ++-------
arch/arm/plat-samsung/pm.c | 10 ++--
7 files changed, 80 insertions(+), 89 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/include/mach/pm-core.h b/arch/arm/mach-s3c24xx/include/mach/pm-core.h
index 5e4ce89d0158..8f87606c4cdc 100644
--- a/arch/arm/mach-s3c24xx/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c24xx/include/mach/pm-core.h
@@ -15,6 +15,7 @@
static inline void s3c_pm_debug_init_uart(void)
{
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
unsigned long tmp = __raw_readl(S3C2410_CLKCON);
/* re-start uart clocks */
@@ -24,6 +25,7 @@ static inline void s3c_pm_debug_init_uart(void)
__raw_writel(tmp, S3C2410_CLKCON);
udelay(10);
+#endif
}
static inline void s3c_pm_arch_prepare_irqs(void)
@@ -75,11 +77,6 @@ static inline void s3c_pm_arch_show_resume_irqs(void)
s3c_irqwake_eintmask);
}
-static inline void s3c_pm_arch_update_uart(void __iomem *regs,
- struct pm_uart_save *save)
-{
-}
-
static inline void s3c_pm_restored_gpios(void) { }
static inline void samsung_pm_saved_gpios(void) { }
diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
index bbf79ed28583..33cf242734a0 100644
--- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
@@ -20,6 +20,7 @@
static inline void s3c_pm_debug_init_uart(void)
{
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
u32 tmp = __raw_readl(S3C_PCLK_GATE);
/* As a note, since the S3C64XX UARTs generally have multiple
@@ -35,6 +36,7 @@ static inline void s3c_pm_debug_init_uart(void)
__raw_writel(tmp, S3C_PCLK_GATE);
udelay(10);
+#endif
}
static inline void s3c_pm_arch_prepare_irqs(void)
@@ -63,48 +65,6 @@ static inline void s3c_pm_arch_show_resume_irqs(void)
#define s3c_irqwake_intallow 0
#endif
-static inline void s3c_pm_arch_update_uart(void __iomem *regs,
- struct pm_uart_save *save)
-{
- u32 ucon = __raw_readl(regs + S3C2410_UCON);
- u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
- u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
- u32 new_ucon;
- u32 delta;
-
- /* S3C64XX UART blocks only support level interrupts, so ensure that
- * when we restore unused UART blocks we force the level interrupt
- * settigs. */
- save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
-
- /* We have a constraint on changing the clock type of the UART
- * between UCLKx and PCLK, so ensure that when we restore UCON
- * that the CLK field is correctly modified if the bootloader
- * has changed anything.
- */
- if (ucon_clk != save_clk) {
- new_ucon = save->ucon;
- delta = ucon_clk ^ save_clk;
-
- /* change from UCLKx => wrong PCLK,
- * either UCLK can be tested for by a bit-test
- * with UCLK0 */
- if (ucon_clk & S3C6400_UCON_UCLK0 &&
- !(save_clk & S3C6400_UCON_UCLK0) &&
- delta & S3C6400_UCON_PCLK2) {
- new_ucon &= ~S3C6400_UCON_UCLK0;
- } else if (delta == S3C6400_UCON_PCLK2) {
- /* as an precaution, don't change from
- * PCLK2 => PCLK or vice-versa */
- new_ucon ^= S3C6400_UCON_PCLK2;
- }
-
- S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
- ucon, new_ucon, save->ucon);
- save->ucon = new_ucon;
- }
-}
-
static inline void s3c_pm_restored_gpios(void)
{
/* ensure sleep mode has been cleared from the system */
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index fd6dbb263ed5..a612e9779057 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -305,6 +305,56 @@ static void s3c64xx_pm_prepare(void)
__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
}
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
+void s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save)
+{
+ u32 ucon;
+ u32 ucon_clk
+ u32 save_clk;
+ u32 new_ucon;
+ u32 delta;
+
+ if (!soc_is_s3c64xx())
+ return;
+
+ ucon = __raw_readl(regs + S3C2410_UCON);
+ ucon_clk = ucon & S3C6400_UCON_CLKMASK;
+ sav_clk = save->ucon & S3C6400_UCON_CLKMASK;
+
+ /* S3C64XX UART blocks only support level interrupts, so ensure that
+ * when we restore unused UART blocks we force the level interrupt
+ * settigs. */
+ save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
+
+ /* We have a constraint on changing the clock type of the UART
+ * between UCLKx and PCLK, so ensure that when we restore UCON
+ * that the CLK field is correctly modified if the bootloader
+ * has changed anything.
+ */
+ if (ucon_clk != save_clk) {
+ new_ucon = save->ucon;
+ delta = ucon_clk ^ save_clk;
+
+ /* change from UCLKx => wrong PCLK,
+ * either UCLK can be tested for by a bit-test
+ * with UCLK0 */
+ if (ucon_clk & S3C6400_UCON_UCLK0 &&
+ !(save_clk & S3C6400_UCON_UCLK0) &&
+ delta & S3C6400_UCON_PCLK2) {
+ new_ucon &= ~S3C6400_UCON_UCLK0;
+ } else if (delta == S3C6400_UCON_PCLK2) {
+ /* as an precaution, don't change from
+ * PCLK2 => PCLK or vice-versa */
+ new_ucon ^= S3C6400_UCON_PCLK2;
+ }
+
+ S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
+ ucon, new_ucon, save->ucon);
+ save->ucon = new_ucon;
+ }
+}
+#endif
+
int __init s3c64xx_pm_init(void)
{
int i;
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
index b336df0c57f3..efdb5a27c060 100644
--- a/arch/arm/mach-s5pv210/pm.c
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -99,8 +99,6 @@ static int s5pv210_suspend_enter(suspend_state_t state)
u32 eint_wakeup_mask = s5pv210_read_eint_wakeup_mask();
int ret;
- s3c_pm_debug_init();
-
S3C_PMDBG("%s: suspending the system...\n", __func__);
S3C_PMDBG("%s: wakeup masks: %08x,%08x\n", __func__,
@@ -113,7 +111,7 @@ static int s5pv210_suspend_enter(suspend_state_t state)
return -EINVAL;
}
- s3c_pm_save_uarts();
+ s3c_pm_save_uarts(false);
s5pv210_pm_prepare();
flush_cache_all();
s3c_pm_check_store();
@@ -122,7 +120,7 @@ static int s5pv210_suspend_enter(suspend_state_t state)
if (ret)
return ret;
- s3c_pm_restore_uarts();
+ s3c_pm_restore_uarts(false);
S3C_PMDBG("%s: wakeup stat: %08x\n", __func__,
__raw_readl(S5P_WAKEUP_STAT));
diff --git a/arch/arm/plat-samsung/include/plat/pm-common.h b/arch/arm/plat-samsung/include/plat/pm-common.h
index 1268bae04234..87fa97fd6e8b 100644
--- a/arch/arm/plat-samsung/include/plat/pm-common.h
+++ b/arch/arm/plat-samsung/include/plat/pm-common.h
@@ -69,25 +69,26 @@ struct pm_uart_save {
*/
extern void s3c_pm_dbg(const char *msg, ...);
-/**
- * s3c_pm_debug_init() - suspend/resume low level debug initialization.
- * @base: Virtual base of UART to use for suspend/resume debugging.
- *
- * This function needs to be called before S3C_PMDBG() can be used, to set up
- * UART port base address and configuration.
- */
-extern void s3c_pm_debug_init(void);
-
#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)
-extern void s3c_pm_save_uarts(void);
-extern void s3c_pm_restore_uarts(void);
+extern void s3c_pm_save_uarts(bool is_s3c24xx);
+extern void s3c_pm_restore_uarts(bool is_s3c24xx);
+
+#ifdef CONFIG_ARCH_S3C64XX
+extern void s3c_pm_arch_update_uart(void __iomem *regs,
+ struct pm_uart_save *save);
+#else
+static inline void
+s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save)
+{
+}
+#endif
+
#else
#define S3C_PMDBG(fmt...) pr_debug(fmt)
-#define s3c_pm_debug_init() do { } while (0)
-static inline void s3c_pm_save_uarts(void) { }
-static inline void s3c_pm_restore_uarts(void) { }
+static inline void s3c_pm_save_uarts(bool is_s3c24xx) { }
+static inline void s3c_pm_restore_uarts(bool is_s3c24xx) { }
#endif
/* suspend memory checking */
diff --git a/arch/arm/plat-samsung/pm-debug.c b/arch/arm/plat-samsung/pm-debug.c
index b76b1e9ba4ae..482d53753e93 100644
--- a/arch/arm/plat-samsung/pm-debug.c
+++ b/arch/arm/plat-samsung/pm-debug.c
@@ -18,15 +18,6 @@
#include <plat/cpu.h>
#include <plat/pm-common.h>
-#ifdef CONFIG_SAMSUNG_ATAGS
-#include <plat/pm.h>
-#include <mach/pm-core.h>
-#else
-static inline void s3c_pm_debug_init_uart(void) {}
-static inline void s3c_pm_arch_update_uart(void __iomem *regs,
- struct pm_uart_save *save) {}
-#endif
-
static struct pm_uart_save uart_save;
extern void printascii(const char *);
@@ -43,12 +34,6 @@ void s3c_pm_dbg(const char *fmt, ...)
printascii(buff);
}
-void s3c_pm_debug_init(void)
-{
- /* restart uart clocks so we can use them to output */
- s3c_pm_debug_init_uart();
-}
-
static inline void __iomem *s3c_pm_uart_base(void)
{
unsigned long paddr;
@@ -59,7 +44,7 @@ static inline void __iomem *s3c_pm_uart_base(void)
return (void __iomem *)vaddr;
}
-void s3c_pm_save_uarts(void)
+void s3c_pm_save_uarts(bool is_s3c2410)
{
void __iomem *regs = s3c_pm_uart_base();
struct pm_uart_save *save = &uart_save;
@@ -70,14 +55,14 @@ void s3c_pm_save_uarts(void)
save->umcon = __raw_readl(regs + S3C2410_UMCON);
save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
- if (!soc_is_s3c2410())
+ if (!is_s3c2410)
save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
S3C_PMDBG("UART[%p]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
regs, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
}
-void s3c_pm_restore_uarts(void)
+void s3c_pm_restore_uarts(bool is_s3c2410)
{
void __iomem *regs = s3c_pm_uart_base();
struct pm_uart_save *save = &uart_save;
@@ -90,6 +75,6 @@ void s3c_pm_restore_uarts(void)
__raw_writel(save->umcon, regs + S3C2410_UMCON);
__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
- if (!soc_is_s3c2410())
+ if (!is_s3c2410)
__raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
}
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index d6bfd66592b0..03c22a9dee21 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -25,6 +25,7 @@
#include <asm/irq.h>
+#include <plat/cpu.h>
#include <plat/pm.h>
#include <mach/pm-core.h>
@@ -70,8 +71,7 @@ static int s3c_pm_enter(suspend_state_t state)
{
int ret;
/* ensure the debug is initialised (if enabled) */
-
- s3c_pm_debug_init();
+ s3c_pm_debug_init_uart();
S3C_PMDBG("%s(%d)\n", __func__, state);
@@ -100,7 +100,7 @@ static int s3c_pm_enter(suspend_state_t state)
samsung_pm_saved_gpios();
}
- s3c_pm_save_uarts();
+ s3c_pm_save_uarts(soc_is_s3c2410());
s3c_pm_save_core();
/* set the irq configuration for wake */
@@ -137,14 +137,14 @@ static int s3c_pm_enter(suspend_state_t state)
/* restore the system state */
s3c_pm_restore_core();
- s3c_pm_restore_uarts();
+ s3c_pm_restore_uarts(soc_is_s3c2410());
if (!of_have_populated_dt()) {
samsung_pm_restore_gpios();
s3c_pm_restored_gpios();
}
- s3c_pm_debug_init();
+ s3c_pm_debug_init_uart();
/* check what irq (if any) restored the system */
--
2.20.0
next prev parent reply other threads:[~2019-10-10 20:29 UTC|newest]
Thread overview: 135+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-10 20:28 [PATCH 00/36] ARM: samsung platform cleanup Arnd Bergmann
2019-10-10 20:28 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 01/36] ARM: samsung: make S3C24XX_MISCCR access indirect Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 02/36] ARM: s3c: simplify mach/io.h Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 03/36] usb: gadget: s3c: use platform resources Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-23 10:06 ` Krzysztof Kozlowski
2019-10-23 12:46 ` Krzysztof Kozlowski
2019-10-23 13:26 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 04/36] usb: gadget: s3c-hsudc: remove platform header dependency Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-23 10:09 ` Krzysztof Kozlowski
2019-10-23 12:21 ` Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann [this message]
2019-10-10 20:29 ` [PATCH 05/36] ARM: samsung: make pm-debug platform independent Arnd Bergmann
2019-10-23 10:27 ` Krzysztof Kozlowski
2019-10-23 12:13 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 06/36] ARM: samsung: move CONFIG_DEBUG_S3C_UART to Kconfig.debug Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-23 10:12 ` Krzysztof Kozlowski
2019-10-23 12:22 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 07/36] ARM: exynos: use private samsung_cpu_id copy Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-23 10:54 ` Krzysztof Kozlowski
2019-10-23 12:37 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 08/36] ARM: exynos: stop selecting PLAT_SAMSUNG Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-15 14:12 ` Ulf Hansson
2019-10-23 10:57 ` Krzysztof Kozlowski
2019-10-23 12:43 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 09/36] ARM: samsung: move pm check code to drivers/soc Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-23 11:32 ` Krzysztof Kozlowski
2019-10-23 12:45 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 10/36] ARM: s5pv210: use private pm save/restore Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-23 11:55 ` Krzysztof Kozlowski
2019-10-23 13:12 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 11/36] ARM: s5pv210: split from plat-samsung Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-11 5:51 ` Uwe Kleine-König
2019-10-11 5:51 ` Uwe Kleine-König
2019-10-22 14:01 ` Arnd Bergmann
2019-10-22 15:53 ` Uwe Kleine-König
2019-10-22 16:20 ` Arnd Bergmann
2019-10-15 14:13 ` Ulf Hansson
2019-10-15 14:23 ` Thierry Reding
2019-10-23 12:14 ` Krzysztof Kozlowski
2019-10-23 13:17 ` Arnd Bergmann
2019-10-23 14:12 ` Krzysztof Kozlowski
2019-10-10 20:29 ` [PATCH 12/36] ARM: s3c64xx: remove mach/hardware.h Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-16 10:09 ` Charles Keepax
2019-10-10 20:29 ` [PATCH 13/36] ARM: s3c: move regs-spi.h into spi driver Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-23 12:32 ` Krzysztof Kozlowski
2019-10-23 13:21 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 14/36] ARM: s3c: move irqchip driver back into platform Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-10 20:29 ` [PATCH 15/36] ARM: s3c: adc: move header to linux/soc/samsung Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann
2019-10-10 22:20 ` Guenter Roeck
2019-10-10 22:20 ` Guenter Roeck
2019-10-10 22:29 ` Dmitry Torokhov
2019-10-10 22:29 ` Dmitry Torokhov
2019-10-10 22:44 ` Sebastian Reichel
2019-10-10 22:44 ` Sebastian Reichel
2019-10-23 12:37 ` Krzysztof Kozlowski
2019-10-23 13:23 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 16/36] ARM: s3c: move spi fiq handler into platform Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 17/36] ARM: s3c: h1940-audio: turn into platform driver Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 18/36] ARM: s3c: gta02-audio: " Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 19/36] ARM: s3c: rx1950: " Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 20/36] ASoC: samsung: s3c2412-i2s: avoid hardcoded S3C2410_PA_IIS Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-11 10:50 ` Mark Brown
2019-10-11 10:50 ` Mark Brown
2019-10-10 20:30 ` [PATCH 21/36] ARM: s3c: move iis pinctrl config into boards Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-23 12:50 ` Krzysztof Kozlowski
2019-10-23 13:29 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 22/36] ARM: s3c: leds: move setpull() calls into board files Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 23/36] ARM: s3c: move s3cmci pinctrl handling " Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-15 14:12 ` Ulf Hansson
2019-10-16 13:12 ` Linus Walleij
2019-10-10 20:30 ` [PATCH 24/36] ARM: s3c: include mach/irqs.h where needed Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 25/36] ARM: s3c: spi: avoid hardcoding fiq number in driver Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 26/36] ARM: s3c: bast: avoid irq_desc array usage Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 27/36] ARM: s3c: fix mmc gpio lookup tables Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 28/36] fbdev: s3c2410fb: remove mach header dependency Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-23 13:13 ` Krzysztof Kozlowski
2019-10-23 13:35 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 29/36] ARM: s3c: cpufreq: split out registers Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 30/36] ARM: s3c: remove cpufreq header dependencies Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-23 13:38 ` Krzysztof Kozlowski
2019-10-23 13:46 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 31/36] ARM: s3c: cpufreq: use global s3c2412_cpufreq_setrefresh Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-23 13:44 ` Krzysztof Kozlowski
2019-10-23 13:57 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 32/36] ARM: s3c: iotiming: make functions static Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 33/36] ARM: s3c: move low-level clk reg access into platform code Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-23 13:49 ` Krzysztof Kozlowski
2019-10-23 13:54 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 34/36] ARM: s3c: stop including mach/hardware.h from mach/io.h Arnd Bergmann
2019-10-10 20:30 ` Arnd Bergmann
2019-10-10 21:02 ` Russell King - ARM Linux admin
2019-10-10 21:02 ` Russell King - ARM Linux admin
2019-10-10 21:53 ` Arnd Bergmann
2019-10-10 21:53 ` Arnd Bergmann
2019-10-15 14:52 ` [PATCH 01/36] ARM: samsung: make S3C24XX_MISCCR access indirect Tomasz Figa
2019-10-10 21:07 ` [PATCH 35/36] ARM: s3c: move into a common directory Arnd Bergmann
2019-10-10 21:07 ` Arnd Bergmann
2019-10-23 14:05 ` Krzysztof Kozlowski
2019-10-10 21:07 ` [PATCH 36/36] ARM: s3c: make headers local if possible Arnd Bergmann
2019-10-10 21:07 ` Arnd Bergmann
2019-10-23 13:10 ` [PATCH 00/36] ARM: samsung platform cleanup Krzysztof Kozlowski
2019-10-23 13:39 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191010203043.1241612-5-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=kgene@kernel.org \
--cc=krzk@kernel.org \
--cc=kyungmin.park@samsung.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).